Post on 05-Sep-2020
BCT 102 Residential Printreading
Foundation Plans
Basic inFormation Provided
Foundation Plan Basic Information • Horizontal cut plane at 12", section cut location and
direction • All exterior dimensions “should be” measured from the
foundation outside wall. • Plan shows footing (hidden lines) and stem wall
location. ( not relative to property lines) • Shows interior footings, size and location: large load
point, small pier pad, fireplace. • Foundation vents, low point drain, crawl access • Under floor beams (girders), beam pockets • Floor joist/beam size, spacing and direction.
Typical Foundation Plan
Typical Basement Foundation Plan
Dimensions from outside stem wall
Small pier pads
Load Bearing Point Footing Beam pockets Air Vent
Brick Veneer
Dimensions
Dimensions from outside brick veneer?
Brick Veneer
Floor joists
Crawl Access
Beam pockets
Post & Beam
Foundation vents
Outside footing
Foundation wall
Inside footing
Fireplace footing
Section cut
Footing size
Beam spacing
Footing pad spacing
Footing notes
Dimensions
Typical Means ?
Steel reinforcing bar
Drawing Notes
Floor Joist
Slab / Fill & Steel
Footing
Foundation wall
Notes
Dimensions
Sheathing, girder, post, pier pad, wood to concrete barrier via notes
WH
AC
Mechanical Location
Beam Pocket
Footing Steel notes
Beam size
Rough in Plumbing
Joist direction
Page Information: Scale, Plus
Page 1 of 6
drawing scale
Drawing object