Post on 16-Mar-2019
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
NO
TES
NO
TES
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
Locations: Adelaide | Melbourne | Sydney | tf: 1300 768 826 | Singapore | tf: +65 6259 8486 | info@comtecipe.com | comtecipe.com
2014 Comtec IPECompany names are trademarked by each respective company
Comtec IPE
Our PrOcessCOMTEC IPE uses a proven method to assist our clients in selecting the right equipment for the application. The four important stages of this process include:
sTage 1: analyseWe discuss your project with you by investing the time to truly understand what it is you need to achieve. From this point, we are able to review those needs and use our expertise, in conjunction with our technology partners, to customise a solution.
sTage 2: recOmmendWe develop a clearly defi ned scope of project, recommendation of equipment, partners and processes to match your requirement. Comtec IPE engineers can be utilised to assist with product design and development best suited to the application. Understanding today that fi nancial factors are important, we will also develop a price justifi cation model, and can assist providing fi nancing for the project, if required.
sTage 3: imPlemenTWhen you engage Comtec IPE, we ensure the project management meets the requirements as they are detailed in the scope of supply. From an experienced project manager, scope of work documentation, drawings, layouts, total integration responsibility, timeline management, staging & testing, installation & commissioning, training, manuals and
documentation, product verifi cation & sign off.
sTage 4: suPPOrTGetting you started is only part of the process. Comtec IPE continues to support your production with factory certifi ed technicians providing: predictive / scheduled maintenance programs, emergency maintenance, spare parts, and process training.
SpecialisedMoulds andTechnologies
ComtecIPe-Learning
Integrated Manufacturing Systems
IntellectualPropertyManagement
Materials &Consumables
Our value TO cusTOmers
We offer multiple levels of support to businesses as required, with complete fl exibility to match each application. As a result clients have re-duced cost, increased effi ciency, and maintained focus on developing their products and services to grow their businesses.
WhaT We dO
Comtec IPE designs & develops products and processes that are high-quality, high-yield, conceived to suit each application, and easy to implement. Expertise is offered in the following areas:
At Comtec IPE, we work closely with our clients to understand their unique need and then customise and source the solution to match. We take clients from the product concept stage to ongoing production by simplifying the selection of equipment, processes and materials. Specialising in the Healthcare, Packaging, Consumer and Electronics markets.
ProductDesign &Development
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
NO
TES
NO
TES
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
Locations: Adelaide | Melbourne | Sydney | tf: 1300 768 826 | Singapore | tf: +65 6259 8486 | info@comtecipe.com | comtecipe.com
2014 Comtec IPECompany names are trademarked by each respective company
Our PurPOse: To bring high quality, leading edge, innovativeproducts and solutions to our customers.
The cOre values ThaT drive us:
inTegriTy : We believe in the absoluteness of integrity and conduct all our internal and external relationships with honesty. We build trust by following the principle of always doing the right thing.
relaTiOnshiPs : We invest in relationships with clients, employees and partners with a long-term perspective and believe our success lies in their success.
FuTure : We invest in knowledge, technology and our employees to bring leading edge innovations and ideas to clients. We create sustainability through providing economical, environmental production options.
cOmTec iPe ausTraliasian TechnOlOgy milesTOnes
cOmTec iPe hisTOric milesTOnes
1987 Founded as International Plastics Equipment (IPE), operating out of Adelaide
1987 First ceramic insulated hot-runner system
1989 Integra ancillary equipment line developed, Adelaide representative for Arburg GmbH + Co. KG
1994 Technology partner Stubli added
1998 Technology partner Mold-Masters added
1998 Bayonet type rapid mould clamping system delivered
1999 Technologypartner Trexel Added
1999 Trexel injection moulding cell installed for technical application
1999 LSR machine and dosage unit cell installed for medical application 2003 CIM
manufacturing cell installed for implantable medical device
2008 Technology partner Tampoprint added
2010 Technology Partner Automatik Group / Maag added
2001 Comtec IPE formed after the acquisition of Comtec Australia Pty Ltd. Including national agency for technology partners Arburg GmbH & Co. KG and Coperion GmbH extrusion.
2002 JK Plastics Equipment acquired
2002 Fully automated medical lens manufacturing cell delivered
2003 Halco Engineering acquired adding the technology partner Conair Inc.
2004 Priamus real time process monitoring system via integrated cavity temperature sensors installed
2005 Implementation of SAP
2006 Australiasian technology partner for Ritemp Technologies added
2011 Moved to new central distribution warehouse
2010 High-speed, high-volume closure sort and printing system integrated
2012 E-multi system integrated to packaging application
2008 Single gate co-injection system installed for medical application 2013 Integrated handle
assembly with IML pail moulding system installed, removing secondary processes
2014 Singapore office opened
2012 Celebrating25th Anniversary
2013 Technology partner Brink, F&S Tool, and Apex Technologies added. SE Asian technology partner for Ritemp Technologies added
2001 Sydney and Melbourne offices opened
PurPOse, cOre value, hisTOry & milesTOnesFounded by the Parrington Family as International Plastics Equipment (IPE) in January 1987, the company acquired Comtec Australia Pty Ltd in 2001 and became Comtec IPE. With years of industry leading experience, the founding partners and the Comtec IPE team have, and continue to, operate to the highest standard of integrity, commitment and performance.
Since inception, Comtec IPE has been recognised as a valued-added partner; assisting clients to increase productivity by harnessing best in class optimised technologies, advanced integration techniques and ongoing training/ support. Gaining a reputation for exceptional technical skills and forward thinking solutions, the company has continued to grow and expand its base of technology partners.