FIGURE 8.1 Process and controller. Curtis Johnson Process Control Instrumentation Technology, 8e]...

Post on 27-Mar-2015

229 views 3 download

Tags:

Transcript of FIGURE 8.1 Process and controller. Curtis Johnson Process Control Instrumentation Technology, 8e]...

FIGURE 8.1 Process and controller.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.2 Refrigerator/freezer system inputs and outputs.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.3 Continuous control of level.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.4 Discrete control of level.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.5 Composite continuous and discrete control.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.6 Objectives and subobjectives of a process.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.7 A discrete-control process.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.8 Completion of the initialization phase of the process shown in FIGURE 8.7.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.9 Basic flowchart symbols.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.10 Part of the initialization flowchart for FIGURE 8.7.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.11 Tank process for Example 8.4.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.12 Oven system for discrete control.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.13 Use of a relay and switch to start a motor.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.14 Use of momentary push-button switches and a relay to implement a latch.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.15 Symbols of input devices used in ladder diagrams.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.16 Symbols of output devices used in ladder diagrams.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.17 Symbols for switches used in ladder diagrams.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.18 Ladder diagram to control two lights.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.19 Elevator system for Example 8.6.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.20 Initialization to move platform down when the START button is pushed for Example 8.6.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.21 Ladder diagram for the STOP sequence of Example 8.6.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.22 The complete ladder diagram for Example 8.6.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.23 A simplified ladder diagram for Example 8.6.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.24 Solution for Example 8.7.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.25 Basic structure of the programmable logic controller (PLC).

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.26 Typical wiring to a PLC input module.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.27 Typical wiring to a PLC output module.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.28 PLC scan time puts restrictions on the speed of events.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.28 (continued) PLC scan time puts restrictions on the speed of events.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.29 Hand-held PLC programming unit.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.30 Desktop terminal PLC programming unit.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.31 Using an NC switch to turn on a light with relay logic and with PLC programming: (a) Wrong, the button turns the light OFF; (b) with relay logic, the button turns the light ON; and (c) with a PLC program, the button turns the light ON.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.32 Physical connections to the PLC (a) and the programmed ladder diagram (b) for a motor start/stop system.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.32 (continued) Physical connections to the PLC (a) and the programmed ladder diagram (b) for a motor start/stop system.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.33 Physical elements for Example 8.9.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.34 Wiring and program solution for Example 8.9.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.35 The basic PLC counter.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.36 Program and timing solution to Example 8.10.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.37 PLC timer functions: (a) simple timer, (b) accumulating timer.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.38 Solution to Example 8.11.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.39 Chemical system for Example 8.12.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.40 PLC program solution for Example 8.12.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.41 Tank system for Example 8.13.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.42 Physical ladder diagram for Example 8.13.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.43 Programmed ladder diagram for Example 8.13.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.44 System for use in Problems 8.8 and 8.14.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.45 Process for Problems 8.11 and 8.16.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.46 Motor and switches for Problem 8.15.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.47 System for Problems S8.1, S8.2, and S8.3.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.

FIGURE 8.48 Hydroponic system for Problem S8.4.

Curtis JohnsonProcess Control Instrumentation Technology, 8e]

Copyright ©2006 by Pearson Education, Inc.Upper Saddle River, New Jersey 07458

All rights reserved.