SL. NO. DESCRIPTION OF ITEM QTY. Remarks

1 MARKING LEAD (100 M/ 12 MM) 2 NOS

2 CEILING (5M - 16/18/20 MM) AS REQUIRED

3 D-SACKLE (6.5 T) 4 NOS

4 SINGLE SHEAVE PULLY (OPEN) 4 NOS

5 SINGLE SHEAVE PULLY (CLOSE) 3 NOS

6 DOUBLE SHEAVE PULLY 2 NOS

7 KATKA ROPE (2M - WITH 'T' CONNECTION) 4 NOS

8 PP ROPE (18 MM) 1 BUNDLE

9 PP ROPE (20 MM) 1 BUNDLE

10 DISCHARGE ROD 6 NOS

11 FALL ARRESTER 2 NOS

12 SCREW DIVER (BAG TYPE) 2 NOS

13 COME ALONG CLAMP (3 bolt) 2 NOS

14 COME ALONG CLAMP (AUTOMATIC) 2 NOS

15 CEILING (1M - 16 MM) 4 NOS

16 RING SPANNER (24/26) 4 NOS

17Compresser Machine with Die (Auto) 1 NOS Additional 1 nos Manual as back-up

18 Flat File (8mm) 2 NOS

19 Marking Tape (30m) 1 NOS

20 HEXAFRAME (WITH BLADE) 2 NOS + 2 EXTRA BLADES

1Earth-Wire Beat As per Requirement

MSJ should be 30m away from

tower

2 Earth-Wire Dead-End As per Requirement

3 Earth-Wire Jumper Cone with N/B As per Requirement

4 Middle Span Joint As per RequirementMSJ should be 30m away from

tower, only 1 MSJ in one span

5 Earth-Wire Vibration Damper As per Requirement

6 Earth-Wire Suspension Clamp As per Requirement

1 Engineer 1

2 Safety Officer 1

3 Supervisor 2

4 Skilled Labour (Fitter) 3 Depends upon Site condition

5 Unskilled labour (Helper) 8 Depends upon Site condition

Minimum Requirement of Manpower

Emergency Re-installation in case of Earth-Wire snapping

Requirement of T&P

Requirement of Material