Earth Wire Snapping
-
Upload
shivendra-singh -
Category
Documents
-
view
215 -
download
0
description
Transcript of Earth Wire Snapping
-
SL. NO. DESCRIPTION OF ITEM QTY. Remarks
1 MARKING LEAD (100 M/ 12 MM) 2 NOS
2 CEILING (5M - 16/18/20 MM) AS REQUIRED
3 D-SACKLE (6.5 T) 4 NOS
4 SINGLE SHEAVE PULLY (OPEN) 4 NOS
5 SINGLE SHEAVE PULLY (CLOSE) 3 NOS
6 DOUBLE SHEAVE PULLY 2 NOS
7 KATKA ROPE (2M - WITH 'T' CONNECTION) 4 NOS
8 PP ROPE (18 MM) 1 BUNDLE
9 PP ROPE (20 MM) 1 BUNDLE
10 DISCHARGE ROD 6 NOS
11 FALL ARRESTER 2 NOS
12 SCREW DIVER (BAG TYPE) 2 NOS
13 COME ALONG CLAMP (3 bolt) 2 NOS
14 COME ALONG CLAMP (AUTOMATIC) 2 NOS
15 CEILING (1M - 16 MM) 4 NOS
16 RING SPANNER (24/26) 4 NOS
17Compresser Machine with Die (Auto) 1 NOS Additional 1 nos Manual as back-up
18 Flat File (8mm) 2 NOS
19 Marking Tape (30m) 1 NOS
20 HEXAFRAME (WITH BLADE) 2 NOS + 2 EXTRA BLADES
1Earth-Wire Beat As per Requirement
MSJ should be 30m away from
tower
2 Earth-Wire Dead-End As per Requirement
3 Earth-Wire Jumper Cone with N/B As per Requirement
4 Middle Span Joint As per RequirementMSJ should be 30m away from
tower, only 1 MSJ in one span
5 Earth-Wire Vibration Damper As per Requirement
6 Earth-Wire Suspension Clamp As per Requirement
1 Engineer 1
2 Safety Officer 1
3 Supervisor 2
4 Skilled Labour (Fitter) 3 Depends upon Site condition
5 Unskilled labour (Helper) 8 Depends upon Site condition
Minimum Requirement of Manpower
Emergency Re-installation in case of Earth-Wire snapping
Requirement of T&P
Requirement of Material