Post on 12-Jun-2022
TOC-PRES-13-3415 -FPRevision 0
Double-Shell Tank Visual Inspection ChangesResulting from the Tank 241-AY-102 Primary TankLeak - 14193
Prepared for the U.S. Department of EnergyAssistant Secretary for Environmental Management
Contractor for the U.S. Department of EnergyOffice of River Protection under Contract DE-AC27-08RV14800
P.O. Box 850 Richland, Washington 99352
Approved for Public Release; Further Dissemination Unlimited
TOC-PRES-13-3415 -FPRevision 0
Double-Shell Tank Visual Inspection Changes Resulting fromthe Tank 241-AY-102 Primary Tank Leak - 14193
C. L. GirardotWashington River Protection Solutions
J. M. JohnsonDepartment of Energy - Office of River Protection
D. J. WashenfelderWashington River Protection Solutions
J. K. EngemanWashington River Protection Solutions
Date PublishedNovember 2013
To be Presented atWM 2014 Conference
Waste Management SymposiaPhoenix, AZ
03/02/2014 - 03/06/2014
Prepared for the U.S. Department of EnergyAssistant Secretary for Environmental Management
Contractor for the U.S. Department of EnergyOffice of River Protection under Contract DE-AC27-08RV14800
P.O. Box 850 Richland, Washington 99352
Copyright License By acceptance of this article, the publisher and/or recipient acknowledges the U.S. Government's right to retain a non exclusive, royalty-free licensein an to any copyright covering this paper.
Release Approval Date
Approved for Public Release; Further Dissemination Unlimited
By Janis D. Aardal at 3:53 pm, Nov 14, 2013
TOC-PRES-13-3415 -FPRevision 0
LEGAL DISCLAIMER This report was prepared as an account of work sponsored by an agency ofthe United States Government. Neither the United States Government norany agency thereof, nor any of their employees, makes any warranty,express or implied, or assumes any legal liability or responsibility for theaccuracy, completeness, or any third party's use or the results of such useof any information, apparatus, product, or process disclosed, or representsthat its use would not infringe privately owned rights. Reference herein toany specific commercial product, process, or service by trade name,trademark, manufacturer, or otherwise, does not necessarily constitute orimply its endorsement, recommendation, or favoring by the United StatesGovernment or any agency thereof or its contractors or subcontractors. Theviews and opinions of authors expressed herein do not necessarily state orreflect those of the United States Government or any agency thereof.
This report has been reproduced from the best available copy.
Printed in the United States of America