CURTAIN TRACK INSTRUCTIONS

Fasten the curtain track to the mounting brackets installedin step #2. To fasten, insert the curtain track into the twoprongs of the bracket and push the other end in to snap thecurtain track in place. Attach the curtain using the "J" hooksto the track rollers.

Important: Refrain from using excessive force to snap thebracket into the curtain track.

The curtain track is packaged coiled. Allow the curtain track tostraighten for at least 24 hours prior to installation. To straightenand/or bend the curtain track, use heat (hair dryer or submerge inhot water) or place heavy objects along the track.

If required, use a hacksaw to cut the curtain track to thedesired length.

Draw a line along the ceiling where thecurtain is to be installed. Mount theceiling brackets with the providedanchors (if into just drywall and not astud) and screws approximately 12-14inches apart. Leave 1 inch on each endto ensure the end cover can fit. Addadditional brackets as needed where asharp turn occurs.

Insert the track rollers intothe curtain track. The trackroller wheels should roll onthe inner track.

Fasten the other track endcover in place to lock in thetrack rollers.

FOR VIDEO INSTALLATION INSTRUCTIONS, VISIT: https://urbanred.co/trackinstall

1 4

5212"-14"

Important: All lockable brackets must be facing the same direction.

Fasten the track end cover on oneend of the curtain track with the loopfacing down.

3