Post on 19-Feb-2020
36a Gibson Ave Padstow NSW 2211 www.maxon.com.au | sales@maxon.com.au P 02 8707 3000 | F 02 8707 3001 |
INTELIMAX LITE FEATURES
• Supports packet data and 2-way SMS
• RS232/RS485 Interface (RJ45 Connector)
• Auto recovery including detect and auto redial
• Wide ranging input voltage (5-48VDC)
• Remote AT Command configurable
• Windows GUI for fast configuration and updates
The Intelimax Lite is designed specifically as a cost effective serial modem where standard features of data communications are required. This device is ideally suited for low power and low data rate applications
and when upgrading from 2G to 3G.
The Intelimax Lite has all the essential functionality for todays M2M environment including Packet Switch Data, 2-way SMS, Circuit Switch Data and IP Stack.
This compact and economical device is the ideal solution for high volume applications. The device is easy to configure via AT Commands or Windows GUI and its plug-and-play capability makes the Intelimax Lite
the perfect choice for your entry level M2M telemetry requirements.
Water Quality and levels Monitoring
Remote Monitoring Power and Substations
Data Logging
Traffic Signals
Fleet Management
Applications
Monitor Security systems and alarms
Weather Station
3G Communications Device
COST EFFECTIVE AND RELIABLE 3G CONNECTIVITY
Lite 3G Serial Modem | MA-2060
Frequency BandsWCDMA/HSPA 800 MHz, 850 MHz, 900 MHz, 1900 MHz, 2100 MHz, GSM/GPRS/EDGE 850 MHz, 900 MHz, 1800 MHz, 1900 MHz
* Contact Maxon Australia for further information about Carrier Approvals.
36a Gibson Ave Padstow NSW 2211 www.maxon.com.au | sales@maxon.com.au P 02 8707 3000 | F 02 8707 3001
General Features• RS232 or RS485 (RJ45, hardware option)• HSPA/EDGE/GPRS/GSM module• External SMA (Female) antenna• USB 2.0 connection• Packet switched data
• CSD (Circuit Switch Data) (network dependant)• 2 way SMS• Remote SMS diagnostics• Remote AT command configurable• Remote /local user interface• Extended AT command set• External DC power• Wide ranging input power• Supports TCP/IP, UDP/IP Stack• Supports Firmware over the AIR (FOTA)• Auto recovery including detect and auto redial• Inbuilt carrier detection watchdog• Inbuilt periodic reset
• Backup configuration file (.dat)
Connections• RJ45 Connector for Serial communications (RS232) and Pin 1 for power
• Mini USB connector
• SIM Card
• Antenna Connector SMA Female
• Reset Button
Data• HSPA: UL 5.7 Mbps , DL 7.2 Mbps
• WCDMA PS: UL 384 kbps, DL 384 kbps
• WCDMA CS: UL 64 kbps, DL 64 kbps
• GPRS/EDGE: UL 236 kbps, DL 236 kbps
• GSM CS: UL 9.6 kbps, DL 9.6 kbps
LED• Power (Red)
• RSSI / Data (Red) Module Approvals• GCF • PTCRB• CE • FCC• Carrier Approvals • ACA
Environmental Specifications• Operation Temperature -30 to 70° C
• Extreme Operation Temperature -40 to 85° C
• Storage Temperature -40 to 85° C
• Humidity: 5 to 95%
Power• 5 ~ 48 V DC (reverse polarity protection)
• Active Mode - 100mA @ 12V
• Dormant Mode - 20-30mA @ 12V Operating Systems• Microsoft Windows OS
Compliance• RoHS Compliant
• ACMA
• FCC
Dimensions• 71mm x 55mm x 26mm (without side brackets and antenna)
Mounting• Detachable side mounting brackets
Lite 3G Serial Modem | MA-2060