Post on 27-Jun-2020
CEILING OPTIONS
FlexLam Ceilings Decorative Stamped Steel Ceiling Panels
Faux Wood Beams
137 Phone: 1-800-835-4400 • Fax: 1-800-835-4403 Due to raw material cost fluctuations, prices are subject to change
CEILINGSConsidered the fifth wall in interior
design, FlexLam’s wide variety
of ceiling tile styles and sizes can
add dimension, texture, and visual
interest to any room. Available in
2x2 and 2x4 sizes, for laying into
suspended ceiling grid, or as a direct
glue-up application, these tiles have
the power to define a space.
TEGULAR (2x2 Ceiling Tiles) The embossed part of the design is lower than the suspension grid and the 4 edges are flat to fit nicely into the grid.
GLUE UP (2x2 Ceiling Tiles) Designed with an overlap system (see BIO) to make installation easy, fast and forgiving. These tiles can be used on ceilings and walls.
GLUE UP (2x4 Ceiling Tiles) Designed with an overlap system (see BIO) to make installation easy, fast and forgiving. These tiles can be used on ceilings and walls.
LAY-IN NON-TEGULAR (2x2 Ceiling Tiles)Designed to fit most suspension grid ceiling systems and produces no sag. It is recommended that a standard mineral tile (old or new) be used on top of our lay-in tiles to hold them in place.
ACOUSTIC (Perforated 2x2 Lay-In Ceiling Tiles)2’ x 2’ Lay-In tiles, perforated to increase soundabsorption and offer acoustic qualities, as well as all other 2’ x 2’ Lay-In tile features. Available only in Gloss Black and Gloss White
LAY-IN NON-TEGULAR (2x4 Ceiling Tiles) Designed to fit most suspension grid ceiling systems and produces no sag. It is recommended that a standard mineral tile (old or new) be used on top of our lay-in tiles to hold them in place.
Our BIO has flat edges on two adjoining sides of the FlexLam Ceiling Tile. By orienting all tiles in the same direction and overlapping the tiles, the seams are less noticeable. The placement of the tile is also more flexible so that slight imperfections in the substrate will not affect the finished look. When overlapping four FlexLam Ceiling Tiles, it is necessary to a 1/2” notch in tiles 2 and 3 to avoid a bulge where the panels meet.
MINERAL FIBER (2x2 Lay-In Ceiling Tiles)Flexible mineral fiber ceiling tiles replace standard mineral fiber ceilings with a long-lasting solution. These thermoplastic ceiling tiles have a durable, waterproof surface that is easy to clean. Available in 2’ x 2’ for lay-in ceiling applications, this revolutionary tile is flat with tegular/revealed edges that allow the panel to drop below the grid.
Create Your Formula
Shown: Madison + Gloss White = PCT22G-MAD-WH
See pages 139-142 for patterns. See pages 16-17 for color chart.
FlexLam offers hundreds of
design and finish combinations
suitable for any environment.
Here’s how to create your
formula for success.
Index
Features:• Compatible with 15/16” grid
systems
• Lightweight & easy to install
• Waterproof
• Easy to clean
• Fire retardant
• High impact & abrasion resistant
properties
BIO (Built-In-Overlap)
STEP 1: Choose Any Pattern
STEP 2: Choose Any Finish
FLEXLAM
Shown: Gloss White + Corrugated in AcousticPCT22L-PERF-COR-WH
138 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Due to raw material cost fluctuations, prices are subject to change
CATALOG IS PRICEDIN U.S. DOLLARS
AMERICANAPCT22G-AMER-*
PCT22L-AMER-*
PCT24G-ART-*
PCT22L-ART-*
PCT24L-ART-*
PCT22G-BAL-*
PCT24G-BAL-*
PCT22L-BAL-*
PCT24L-BAL-*
PCT22G-BOS-*
PCT24G-BOS-*
PCT22L-BOS-*
PCT24L-BOS-*
PCT22G-CEL-*
PCT22L-CEL-*
ART DECO BALTIMORE BOSTON CELESTIAL
CELTIC WEAVEPCT22G-CW-*
PCT22L-CW-*
PCT24G-CHA-*
PCT22L-CHA-*
PCT24L-CHA-*
PCT22G-CHE-*
PCT22L-CHE-*
PCT22G-COL-*
PCT22L-COL-*
PCT22L-COR-*
CHARLESTON CHESAPEAKE COLONIAL CORRUGATED
2’ x 2’ & 2’ x 4’ Patterns | Thickness: .030”
CURVATIONPCT22G-CURVA-*
PCT22L-CURVA-*
PCT22L-CURV-* PCT22L-DP-*
PCT24L-DP-*
PCT22G-DOG-*
PCT22L-DOG-*
PCT22L-DOME1-*
CURVES DIAMOND PLATE DOGWOOD DOME 1
TEGULAR (2x2 Ceiling Tiles)
GLUE UP (2x2 Ceiling Tiles)
GLUE UP (2x4 Ceiling Tiles)
LAY-IN NON-TEGULAR (2x2 Ceiling Tiles)
See page 138 for full type descriptions. | Patterns represent a 2’ x 2’ section.
ACOUSTIC (Perforated 2x2 Lay-In Ceiling Tiles)
LAY-IN NON-TEGULAR (2x4 Ceiling Tiles)
139 Phone: 1-800-835-4400 • Fax: 1-800-835-4403 Due to raw material cost fluctuations, prices are subject to change
FlexLam CEILING TILES
See page 142 for price chart. | * See pages 16-17 for color chart.
TEGULAR (2x2 Ceiling Tiles)
GLUE UP (2x2 Ceiling Tiles)
GLUE UP (2x4 Ceiling Tiles)
LAY-IN NON-TEGULAR (2x2 Ceiling Tiles)
DOME 2PCT22L-DOME2-* PCT22L-DOME3-* PCT24G-FL-*
PCT22L-FL-*
PCT24L-FL-*
PCT22G-GEO-*
PCT22L-GEO-*
PCT22G-HUR-*
PCT22L-HUR-*
DOME 3 FLEUR GEORGIAN HURRICANE
INSET COFFERPCT22L-ICOF-* PCT22G-KELP-*
PCT22L-KELP-*
PCT24G-MAD-*
PCT22L-MAD-*
PCT24L-MAD-*
PCT22L-MAR-* PCT22L-MP-*
KELP MADISON MARQUIS METAL PLATES
2’ x 2’ & 2’ x 4’ Patterns | Thickness: .030”
ACOUSTIC (Perforated 2x2 Lay-In Ceiling Tiles)
LAY-IN NON-TEGULAR (2x4 Ceiling Tiles)
MINI DOMEPCT22L-MD-* PCT22L-MQUA-* PCT22G-MOJ-*
PCT22L-MOJ-*
MINI QUADRO MOJAVE PLAIN (Tegular Lay-In)
See page 138 for full type descriptions. | Patterns represent a 2’ x 2’ section.
PCT24G-POR-*
PCT22L-POR-*
PCT24L-POR-*
PORTRAIT
New
140 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Due to raw material cost fluctuations, prices are subject to change
CATALOG IS PRICEDIN U.S. DOLLARS
FlexLam CEILING TILES
See page 142 for price chart. | * See pages 16-17 for color chart.
PCT22L-PLAIN-WH$9.50 ea.
2’ x 2’ & 2’ x 4’ Patterns | Thickness: .030”
QUILTEDPCT22L-QUI-*
PCT22G-SAH-*
PCT22L-SAH-*
SAHARA
PCT22G-SOB-*
PCT22L-SOB-*
SOUTH BEACH
PCT22L-RCOF-*
RAISED PANEL COFFERPCT22G-REV-*
PCT22L-REV-*
REVOLUTION
PCT22L-RIB1-*
RIB 1
PCT22L-REGAL-*
PCT24L-REGAL-*
REGALIA
ROSETTEPCT24G-ROS-*
PCT22L-ROS-*
PCT24L-ROS-*
PCT24G-SD-*
PCT22L-SD-*
PCT24L-SD-*
SAN DIEGOPCT22G-SAV-*
PCT24G-SAV-*
PCT22L-SAV-*
PCT24L-SAV-*
SAVANNAH
TEGULAR (2x2 Ceiling Tiles)
GLUE UP (2x2 Ceiling Tiles)
GLUE UP (2x4 Ceiling Tiles)
LAY-IN NON-TEGULAR (2x2 Ceiling Tiles)
ACOUSTIC (Perforated 2x2 Lay-In Ceiling Tiles)
LAY-IN NON-TEGULAR (2x4 Ceiling Tiles)
SQUARE 5 PCT22L-SQ5-* PCT22G-STAR-*
PCT22L-STAR-*
STARPCT22G-STO-*
PCT22L-STO-*
STORMPCT22G-HAM-*
PCT24G-HAM-*
PCT22L-HAM-*
PCT24L-HAM-*
STRIKE
See page 138 for full type descriptions. | Patterns represent a 2’ x 2’ section.
PCT22L-QUA-*
QUADRO
141 Phone: 1-800-835-4400 • Fax: 1-800-835-4403 Due to raw material cost fluctuations, prices are subject to change
FlexLam CEILING TILES
See page 142 for price chart. | * See pages 16-17 for color chart.
MINERAL
* See pages 16-17 for color chart.
See page 138 for full type descriptions. | Patterns represent a 2’ x 2’ section.
See page 138 for full type descriptions
Add finish code to end of part number ex: PCT22G-AMER-EB
FLEXLAM CEILING ACCESSORIESGRIDMAX™ IS A PATENTED,
SNAP-ON GRID COVER
designed to make grid systems
invisible. It is cost effective and
doesn’t rust or scratch. GridMax
is sized to fit over 15/16” T-bar
suspension grid systems, with
other sizes available by special
order.
Mains, Tees and mouldings are
necessary to cover the entire
grid system. They are packaged
together, to complete 100 square
feet of ceiling, and sold
separately to use as needed.
15/16” (24 MM) GRIDMAX IN PAINTABLE
GRIDMAX IN MOONSTONE COPPER
APPLYING GRIDMAX OVER T-BAR SUSPENSION GRID SYSTEM
For the amount of GridMax needed, measure the perimeter and calculate the square footage.
* See pages 16-17 for color chart.
MINERAL (2x2 Lay-In Ceiling Tiles)
2’ x 2’ & 2’ x 4’ Patterns | Thickness: .030”
TEGULAR (2x2 Ceiling Tiles)
GLUE UP (2x2 Ceiling Tiles)
GLUE UP (2x4 Ceiling Tiles)
LAY-IN NON-TEGULAR (2x2 Ceiling Tiles)
ACOUSTIC (Perforated 2x2 Lay-In Ceiling Tiles)
LAY-IN NON-TEGULAR (2x4 Ceiling Tiles)
WAVATIONPCT22G-WAV-*
PCT22L-WAV-*
PCT24L-WAV-*
PCT22G-TID-*
PCT22L-TID-*
TIDAL
142 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Due to raw material cost fluctuations, prices are subject to change
CATALOG IS PRICEDIN U.S. DOLLARS
FlexLam CEILING TILES
Price
*Finish2’x 2’
Under 25 Pcs.2’x 2’
25 + Pcs.2’x 4’
Under 25 Pcs.2’x 4’
25 + Pcs.
White (*WH) $11.95 ea. $11.25 ea. $21.50 ea. $21.00 ea.Argent Bronze (*AB) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.Argent Copper (*AC) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.
Argent Gold (*AG) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.Argent Silver (*AS) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.Eccoflex Black (*EB) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.Eccoflex Tan (*ET) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.
Mirror (*M) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.Mirror Gold (*MIRG) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.
All Other Finishes $18.35 ea. $17.75 ea. $36.50 ea. $34.95 ea.
GM210-* (4’ Main Cover)...$2.35 ea.GM220-* (2’ Tee Cover)...$1.15 ea.
GM230-* (4’ Tee Cover)...$2.35 ea.GM250-* (4’ Wall Moulding Cover)...$2.35 ea.
PCT22L-MIN$18.35 ea.
FLEXLAMSTEP 1: Choose Any Pattern STEP 2: Choose Any Finish
Shown: Baltimore + Paintable = PCT22L-BAL-WH
See pages 139-142 for patterns. See pages 16-17 for color chart.
143 Phone: 1-800-835-4400 • Fax: 1-800-835-4403 Due to raw material cost fluctuations, prices are subject to change
See pages 139-142 for patterns. See pages 16-17 for color chart.
FLEXLAMSTEP 1: Choose Any Pattern STEP 2: Choose Any Finish
Shown: Georgian + Argent Bronze = PCT22L-GEO-AB
144 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Due to raw material cost fluctuations, prices are subject to change
CATALOG IS PRICEDIN U.S. DOLLARS
FLEXLAMSTEP 1: Choose Any Pattern STEP 2: Choose Any Finish
Shown: Corrugated + Crosshatch Silver = PCT22L-COR-CS
See pages 139-142 for patterns. See pages 16-17 for color chart.
145 Phone: 1-800-835-4400 • Fax: 1-800-835-4403 Due to raw material cost fluctuations, prices are subject to change
(6" Multiple Plate) SM2-215 (2' x 2' lay in)
SM2N-215 (2' x 2' nail up)SM4-215 (2' x 4' nail up)
(6" Multiple Plate)SM2-200 (2' x 2' lay in)
SM2N-200 (2' x 2' nail up)SM4-200 (2' x 4' nail up))
(6" Multiple Plate)SM2-210 (2' x 2' lay in)
SM2N-210 (2' x 2' nail up)SM4-210 (2' x 4' nail up)
(6" Multiple Plate)SM2-205 (2' x 2' lay in)
SM2N-205 (2' x 2' nail up)SM4-205 (2' x 4' nail up)
(3" Multiple Plate)SM2-234 (2' x 2' lay in)
SM2N-234 (2' x 2' nail up)SM4-234 (2' x 4' nail up)
(6" Multiple Plate)SM2-208 (2' x 2' lay in)
SM2N-208 (2' x 2' nail up)SM4-208 (2' x 4' nail up)
(6" Multiple Plate)SM2-204 (2' x 2' lay in))
SM2N-204 (2' x 2' nail up)SM4-204 (2' x 4' nail up)
(6" Multiple Plate)SM2-207 (2' x 2' lay in)
SM2N-207 (2' x 2' nail up)SM4-207 (2' x 4' nail up)
(6" Multiple Plate)SM2-209 (2' x 2' lay in)
SM2N-209 (2' x 2' nail up)SM4-209 (2' x 4' nail up)
• Lightweight, non-combustible panels and accessories are manufactured from tin free steel 30 gauge, .010 thick.
• Chromium treated for superior paint retention.• When material is properly coated, little or no maintenance is required
and cleans with soap and water.• Ceiling panels and cornices are shipped uncoated to allow custom
on-site finishing.• To prevent corrosion, panel must be coated.• Recommended paints are RUST-O-LEUM to maintain the natural metal
appearance, semi-gloss or high gloss oil base paints.• DO NOT USE WATER-BASED PAINT.• HEAVY DUTY SAFETY GLOVES SHOULD BE WORN WHEN HANDLING
PANELS AND CORNICES - EDGES ARE EXTREMELY SHARP.• DUE TO PRODUCTION DYE LOTS, FINISH MAY VARY
ON COLORED TILES & CORNICES.
Our Stamped Ceiling Panels are an exciting interior mix of texture and nostalgia.
Patterns drawn from the past enliven contemporary and traditional styling with their finely crafted detail.
(6" Multiple Plate)SM2-201 (2' x 2' lay in)
SM2N-201 (2' x 2' nail up)SM4-201 (2' x 4' nail up)
When ordering different finishes, please add the following to the end of the part #: Copper = C, Brass = B, Chrome = CH,White = WH, Lacquer = LAQ
(12" Multiple Plate)SM2-303 (2' x 2' lay in)
SM2N-303 (2' x 2' nail up)SM4-303 (2' x 4' nail up)
(12" Multiple Plate)SM2-307 (2' x 2' lay in)
SM2N-307 (2' x 2' nail up)SM4-307 (2' x 4' nail up)
146 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Due to raw material cost fluctuations, prices are subject to change
CATALOG IS PRICEDIN U.S. DOLLARS
DECORATIVE STAMPED STEEL CEILING PANELS
Finish 2' X 2' Lay-In 2' X 2' Nail Up 2' X 4' Nail UpSteel $7.45 $7.45 $20.30
Lacquered $13.50 $13.50 $28.85White $12.10 $12.10 $29.70Brass $36.70 N/A $70.55
Copper $36.70 N/A $70.55Chrome $36.70 N/A $70.55
CUSTOM ORDERS• If acoustics are a concern, all 2' x 2' tiles are
available perforated. Please inquire for pricing and production time.
New
(12" Multiple Plate)SM2-309 (2' x 2' lay in)
SM2N-309 (2' x 2' nail up)SM4-309 (2' x 4' nail up)
(12" Multiple Plate)SM2-335 (2' x 2' lay in)
SM2N-335 (2' x 2' nail up)SM4-335 (2' x 4' nail up)
(12" Multiple Plate)SM2-320 (2' x 2' lay in)
SM2N-320 (2' x 2' nail up)SM4-320 (2' x 4' nail up)
(24" Multiple Plate)SM2-525 (2' x 2' lay in)
SM2N-525 (2' x 2' nail up)SM4-525 (2' x 4' nail up)
(12" Multiple Plate)SM2-314 (2' x 2' lay in)
SM2N-314 (2' x 2' nail up)SM4-314 (2' x 4' nail up)
(12" Multiple Plate)SM2-310 (2' x 2' lay in)
SM2N-310 (2' x 2' nail up)SM4-310 (2' x 4' nail up)
(24" Multiple Plate)SM2-503 (2' x 2' lay in)
SM2N-503 (2' x 2' nail up)SM4-503 (2' x 4' nail up)
(12" Multiple Plate)SM2-321 (2' x 2' lay in)
SM2N-321 (2' x 2' nail up)SM4-321 (2' x 4' nail up)
(24" Multiple Plate)SM2-5000 (2' x 2' lay in)
SM2N-5000 (2' x 2' nail up)SM4-5000 (2' x 4' nail up)
(24" Multiple Plate)SM2-504 (2' x 2' lay in)
SM2N-504 (2' x 2' nail up)SM4-504 (2' x 4' nail up)
(24" Multiple Plate)SM2-505 (2' x 2' lay in)
SM2N-505 (2' x 2' nail up)SM4-505 (2' x 4' nail up)
(24" Multiple Plate)SM4-510 (2' x 4' nail up)
(24" Multiple Plate)SM2-501 (2' x 2' lay in)
SM2N-501 (2' x 2' nail up)SM4-501 (2' x 4' nail up)
(24" Multiple Plate)SM2-502 (2' x 2' lay in)
SM2N-502 (2' x 2' nail up)SM4-502 (2' x 4' nail up)
(24" Multiple Plate)SM2-507 (2' x 2' lay in)
SM2N-507 (2' x 2' nail up)SM4-507 (2' x 4' nail up)
(24" Multiple Plate)SM2-509 (2' x 2' lay in)
SM2N-509 (2' x 2' nail up)SM4-509 (2' x 4' nail up)
When ordering different finishes, please add the following to the end of the part #: Copper = C, Brass = B, Chrome = CH,White = WH, Lacquer = LAQ
147 Phone: 1-800-835-4400 • Fax: 1-800-835-4403 Due to raw material cost fluctuations, prices are subject to change
DECORATIVE STAMPED STEEL CEILING PANELS
Finish 2' X 2' Lay-In 2' X 2' Nail Up 2' X 4' Nail UpSteel $7.45 $7.45 $20.30
Lacquered $13.50 $13.50 $28.85White $12.10 $12.10 $29.70Brass $36.70 N/A $70.55
Copper $36.70 N/A $70.55Chrome $36.70 N/A $70.55
New
HOLD DOWN CLIPS200 PCS. PER BOX
When ordering different finishes, please add the following to the end of the part #: Copper = C, Brass = B, Chrome = CH, White = WH.
(24" x 48" Molded Filler)SM4-4574 -
(24" x 48" Molded Filler)SM4-5007
CONE HEAD NAILS1-1/4" LONG 1 LB. BOXCoverage approx. 200 sq. ft. per box or (25) 4 ft. sections of cornice
(Filler)SM2-235 (2' x 2' lay in)
SM2N-235 (2' x 2' nail up)SM4-235 (2' x 4' nail up)
All Brass, Copper, Chrome and White Panels and Cornices are shipped with a clear baked on enamel finish. Additional finishing is NOT RECOMMENDED.
COPPER COPPER PLATED = CPLATED = C
WHITE WHITE PAINTED = WHPAINTED = WH
Finishes AvAilAble
CHROME PLAT-CHROME PLAT-ED = CHED = CH
LACQUERLACQUERPLATED = LAQPLATED = LAQ
(24" Multiple Plate)SM2-523 (2' x 2' lay in)
SM2N-523 (2' x 2' nail up)SM4-523 (2' x 4' nail up)
(24" Multiple Plate)SM2-515 (2' x 2' lay in)
SM2N-515 (2' x 2' nail up)SM4-515 (2' x 4' nail up)
(24" Multiple Plate)SM2-517 (2' x 2' lay in)
SM2N-517 (2' x 2' nail up)SM4-517 (2' x 4' nail up)
Steel Only
(24" Multiple Plate)SM2-500 (2' x 2' lay in)
SM2N-500 (2' x 2' nail up)SM4-500 (2' x 4' nail up)
(24" Multiple Plate)SM2-535 (2' x 2' lay in)
SM2N-535 (2' x 2' nail up)SM4-535 (2' x 4' nail up)
(24" Multiple Plate)SM2-606 (2' x 2' lay in)
SM2N-606 (2' x 2' nail up)SM4-606 (2' x 4' nail up)
Stainless Steel Only
Powder Coated and Vintage Hand Painted Antique available - please inquire
When ordering different finishes, please add the following to the end of the part #: Copper = C, Brass = B, Chrome = CH,White = WH, Lacquer = LAQ
BRASS BRASS PLATED = BPLATED = B
148 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Due to raw material cost fluctuations, prices are subject to change
CATALOG IS PRICEDIN U.S. DOLLARS
DECORATIVE STAMPED STEEL CEILING PANELS
FILLERS COFFERED CEILING TILE
ACCESSORIES
Part # PriceSM-CLIP $50.50 box
SM-NAIL - Steel - $6.50 boxSM-NAIL-B - Brass - $11.25 boxSM-NAIL-C - Copper - $11.25 boxSM-NAIL-CH - Chrome - $11.25 boxSM-NAIL-WH - White - $8.60 boxSM-NAIL-LAQ - Lacquered - $11.25 box
2' X 2' Lay-InSM-508 1-1/2" Deep$10.15 ea.
2' X 2' Nail Up SM-508-N $10.15 ea.
Finish 2' X 2' Lay-In 2' X 2' Nail Up 2' X 4' Nail UpSteel $7.45 $7.45 $20.30
Lacquered $13.50 $13.50 $28.85White $12.10 $12.10 $29.70Brass $36.70 N/A $70.55
Copper $36.70 N/A $70.55Chrome $36.70 N/A $70.55
New
Available in 4 ft. lengths
• Must be painted with an oil based paint • For a metal finish, you can use
RUST-O-LEUM aluminum paintWhen ordering different finishes, please
add the following to the end of the part #: Copper = C, Brass = B, Chrome = CH,
White = WH, Laquer = LAQ.
STEEL CORNICE
Outwater Plastics offers a wide selection of decorative stamped steel cornice mouldings in a variety of finishes and sizes (please see page 148 for additional finishes). All cornice mouldings are available in 4' lengths and range in projection size from 1-1/2" to 15-1/2". Use a cornice application to add the finishing touch to your new metal ceiling project.
1515
12121616
1717
1818
1313
1414
NOTE: This moulding is a right angle girder nosing.
11
22
33
55
66
77
88
99
1010
1111
44
149 Phone: 1-800-835-4400 • Fax: 1-800-835-4403 Due to raw material cost fluctuations, prices are subject to change
DECORATIVE STAMPED STEEL CORNICES
Part #Face(A)
Projection(B)
Height(C) Steel Lacquer White Brass Copper Chrome
1 SM-800 1-1/2" 1-1/2" 1-1/2" $7.98 ea. $9.89 ea. $9.89 ea. $24.20 ea. $24.20 ea. $24.20 ea.2 SM-810 2-5/8" 2" 2" $7.98 ea. $9.89 ea. $9.89 ea. $24.20 ea. $24.20 ea. $24.20 ea.3 SM-803 3-1/2" 2-1/2" 2-1/2" $8.42 ea. $10.32 ea. $10.32 ea. $28.00 ea. $28.00 ea. $28.00 ea.4 SM-903 3-1/2" 2-1/2" N/A $8.42 ea. $10.32 ea. $10.32 ea. $23.45 ea. $23.45 ea. $23.45 ea.5 SM-801 3-5/8" 2-1/2" 2-1/2" $8.20 ea. $10.10 ea. $10.10 ea. $28.00 ea. $28.00 ea. $28.00 ea.6 SM-909 3-1/2" 3" 3" $8.42 ea. $10.32 ea. $10.32 ea. $28.00 ea. $28.00 ea. $28.00 ea.7 SM-802 4-1/3" 3-1/2" 3-1/2" $8.53 ea. $10.42 ea. $10.42 ea. $28.00 ea. $28.00 ea. $28.00 ea.8 SM-804 4-1/2" 4" 4" $8.42 ea. $10.32 ea. $10.32 ea. $28.00 ea. $28.00 ea. $28.00 ea.9 SM-905 7-1/4" 4" 4" $10.32 ea. $12.22 ea. $12.22 ea. $40.10 ea. $40.10 ea. $40.10 ea.
10 SM-705 6-1/4" 4" 4" $10.32 ea. $12.22 ea. $12.22 ea. $40.77 ea. $40.77 ea. $40.77 ea.11 SM-904 9" 6" 6" $ 12.49 ea. $14.40 ea. $14.40 ea. $56.20 ea. $56.20 ea. $56.20 ea.12 SM-906 9-1/4" 6" 6" $12.49 ea. $14.40 ea. $14.40 ea. $56.20 ea. $56.20 ea. $56.20 ea.13 SM-806 9-1/4" 6" 6" $12.49 ea. $14.40 ea. $14.40 ea. $56.20 ea. $56.20 ea. $56.20 ea.14 SM-707 9" 6-1/4" 6-5/8" $12.49 ea. $14.40 ea. $14.40 ea. $56.20 ea. $56.20 ea. $56.20 ea.15 SM-808 11-1/4" 8-3/4" 8-3/4" $16.07 ea. $17.97 ea. $17.97 ea. $56.20 ea. $56.20 ea. $56.20 ea.16 SM-807 13-1/4" 9-1/2" 9-1/2" $19.00 ea. $20.91 ea. $20.91 ea. $66.70 ea. $66.70 ea. $66.70 ea.17 SM-706 14" 9" 9" $19.00 ea. $20.91 ea. $20.91 ea. $66.70 ea. $66.70 ea. $66.70 ea.18 SM-907 15-1/2" 10-1/2" 10-1/2" $19.00 ea. $20.91 ea. $20.91 ea. $66.70 ea. $66.70 ea. $66.70 ea.
A
B
C
D
* Closed on one end*
Walnut
Medium Oak
Unfinished
Hand Hewn Beam SeriesHand Hewn Beam Series13’ Lengths
RUBBER BEAM STRAPPING
3 Finishes Available
d
d
d
dOur Rustic Beams allow you to bring back that "Old World Style"and to any room with their rustic warmth and charm. These beamsare lightweight and easy to install.
Rustic Beams were fallen logs, hewn into shape using a broad axe.Forging ahead and settling the new frontier, early settlers did not haveaccess to mills and machinery. They shaped the beams used in their homes andbusiness by hand, using their axes and small tools. This resulted in a beam withrugged texture and character.
Due to photographic imaging,products may vary slightly in color.
All sizes listed are approximate.Samples are available, please inquire.
150 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Due to raw material cost fluctuations, prices are subject to change
CATALOG IS PRICEDIN U.S. DOLLARS
THE RUSTIC BEAM COLLECTION
Part # Width
AHeight
BTop Inside
Width CBottom Inside
Width DHH20-55* 5” 5” 2-3/4” 2-1/4”HH30-85* 8” 5-1/8” 6-1/4” 6”HH40-87* 7-1/2” 6-5/8” 5” 4-7/8”
WALNUT / MEDIUM OAKPrice 6 + Pieces
$174.60 ea. $161.13 ea.$203.01 ea. $187.71 ea.$217.28 ea. $200.55 ea.
UNFINISHEDPRICE 6 + Pieces
$150.49 ea. $138.22 ea.$181.25 ea. $168.65 ea.$190.70 ea. $170.75 ea.
* For unfinished add -UNF to the part number* For medium oak add -MEDOAK to the part number
Flat Rate Shipping in the continental U.S.Up to 4 Beams $175.00, 5+ Beams $275.00
Single StrapVINSTRAP $17.13 ea.(Black/Silver)42” L x 1-1/2” W Bolt Spacing: 1-3/8” (2-1/4” C-C)
Double StrapDB-STRAP $29.05 ea.(Black/Silver)41” L x 2-7/8” W Bolt Spacing: 4” (4-3/4” C-C)
ACCESSORIES
New
* For unfinished add -UNF to the part number
2 Finishes Available
Unfinished Finished
A
B
C
D
16’ & 20’ LengthsOld World Beam SeriesOld World Beam Series
* Open on both ends*
POLYURETHANE U-BRACKET
Flange
Due to photographic imaging, products may vary slightly in color.All sizes listed are approximate. Samples are available, please inquire.
151 Phone: 1-800-835-4400 • Fax: 1-800-835-4403 Due to raw material cost fluctuations, prices are subject to change
THE RUSTIC BEAM COLLECTION
Part # Width
AHeight
BTop Inside
Width CBottom Inside
Width D LengthOWB-44* 4-1/2” 4-1/2” 2” 2” 16’OWB-57* 5-1/4” 7-1/4” 3-3/8” 3-3/8” 20’OWB-76* 7” 6-1/2” 4-1/4” 4-1/4” 16’OWB-79* 7-1/4” 9” 4-1/4” 4-1/4” 20’
OWB-1513* 15-1/4” 13” 12” 12” 16’
FINISHEDPrice
$162.24 ea. $314.02 ea.$256.44 ea.$359.81 ea.$565.22 ea.
UNFINISHEDPrice
$124.80 ea.$241.55 ea.$197.27 ea.$276.78 ea.$434.78 ea.
Part # Description PriceOWB-U-44 4” W U-Bracket $41.88 ea.OWB-U-57 5” W U-Bracket $46.60 ea.OWB-U-76 5” W U-Bracket $55.66 ea.
OWB-UF-76 Flange - Bracket $55.66 ea.OWB-U-79 6” W U-Bracket $62.26 ea.
OWB-UF-79 Flange - Bracket $62.26 ea.OWB-U-1513 10” W U-Bracket $120.14 ea.
OWB-UCH-1513 Chevron Bracket $133.36 ea.
WB-STAINIncludes: (1) 16 oz. can of Brown and (1) 8 oz. can of Dark Brown. Use Dark Brown stain to highlight
cracks, splits and knots.$35.50 ea.
ACCESSORIESNew
* Closed on one end*
Modern Beam SeriesModern Beam Series13’ Lengths
d
d
d
d
Our Contemporary offers a smooth milled appearance. Creating a sense of casual elegance adding visual interest with their clean lines.
A
B
C
D
Due to photographic imaging, products may vary slightly in color.All sizes listed are approximate. Samples are available, please inquire.
3 Finishes Available
Walnut
Medium Oak
Unfinished
RUBBER BEAM STRAPPING
152 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Due to raw material cost fluctuations, prices are subject to change
CATALOG IS PRICEDIN U.S. DOLLARS
THE CONTEMPORARY BEAM COLLECTION
Part # Width
AHeight
BTop Inside
Width CBottom Inside
Width DMOD-BEAM10* 4-3/8” 2-1/4” 3” 2-3/4”MOD-BEAM20* 5-7/8” 3-7/8” 4-3/4” 3-1/2”MOD-BEAM30* 7-7/8” 5-7/8” 6-5/8” 4”
WALNUT / MEDIUM OAKPrice 6 + Pieces
$175.38 ea. $160.33 ea.$197.79 ea. $183.01 ea.$259.66 ea. $238.69 ea.
UNFINISHEDPRICE 6 + Pieces
$143.85 ea. $132.31 ea.$175.88 ea. $161.90 ea.$219.26 ea. $200.45 ea.
* For unfinished add -UNF to the part number* For medium oak add -MEDOAK to the part number
Flat Rate Shipping in the continental U.S.Up to 4 Beams $175.00, 5+ Beams $275.00
Single StrapVINSTRAP $17.13 ea.(Black/Silver)42” L x 1-1/2” W Bolt Spacing: 1-3/8” (2-1/4” C-C)
Double StrapDB-STRAP $29.05 ea.(Black/Silver)41” L x 2-7/8” W Bolt Spacing: 4” (4-3/4” C-C)
ACCESSORIES
New
* For unfinished add -UNF to the part number
* For unfinished add -UNF to the part number
New World Beam SeriesNew World Beam Series56”, 12’, 14’, 16’, 20’ & 22’ Lengths
* Open on both ends*
2 Finishes Available
Unfinished Finished
A
B
C
D
POLYURETHANEU-BRACKETS
& FLAT PLATESU-Bracket
Flat Plate CORBELSA
CB
Due to photographic imaging, products may vary slightly in color. All sizes listed are approximate.
Samples are available, please inquire.
153 Phone: 1-800-835-4400 • Fax: 1-800-835-4403 Due to raw material cost fluctuations, prices are subject to change
THE CONTEMPORARY BEAM COLLECTION
Part # Width
AHeight
BTop Inside
Width CBottom Inside
Width D LengthsNWB-35* 3-1/2” 5-1/2” 1-1/8” 1-1/8” 22’NWB-45* 4” 5-3/4” 2-1/8” 2-1/8” 16’NWB-55* 5-1/2” 5-1/2” 2-5/8” 2-5/8” 20’NWB-57* 5-1/2” 7-1/2” 3-3/8” 3-3/8” 20’NWB-65* 6” 5” 3-1/2” 3-1/2” 20’NWB-67* 6” 7-1/4” 3-1/2” 3-1/2” 12’NWB-69* 6” 9” 3-1/8” 3-1/8” 56”NWB-75* 7-3/4” 5-1/2” 6” 6” 14’NWB-76* 7-1/2” 6-1/2” 5” 5” 20’NWB-78* 6-1/2” 7-1/2” 4” 4” 20’NWB-79* 7-1/4” 9-1/4” 4-1/8” 4-1/8” 20’
NWB-711* 7-1/4” 11” 4-3/8” 4-3/8” 20’NWB-811* 8” 11-1/2” 4-7/8” 4-7/8” 14’NWB-911* 9-1/4” 11” 6-1/2” 6-1/2” 20’NWB-914* 9” 14-1/2” 6-3/4” 6-3/4” 20’NWB-915* 9-1/2” 14-3/4” 6-3/4” 6-3/4” 14’
NWB-1114* 11-3/4” 14-3/4” 9” 9” 14’NWB-1118* 11-1/2” 18-3/4” 8-1/4” 8-1/4” 16’NWB-1515* 15-1/8” 15-1/8” 11-1/2” 11-1/2” 16’
FINISHEDPrice
$210.13 ea. $163.55 ea.$235.51 ea.$314.02 ea.$215.88 ea.$188.41 ea.$85.48 ea.
$201.49 ea.$314.02 ea.$320.56 ea.$359.90 ea.$431.77 ea.$311.40 ea.$464.47 ea.$562.61 ea.$380.09 ea.$439.62 ea.$628.02 ea.$607.09 ea.
UNFINISHEDPrice
$161.64 ea.$125.81 ea.$181.16 ea.$241.55 ea.$166.07 ea.$144.92 ea.$65.76 ea.
$154.99 ea.$241.55 ea.$246.58 ea.$276.78 ea.$332.12 ea.$239.53 ea.$357.29 ea.$432.78 ea.$292.38 ea.$338.17 ea.$483.10 ea.$466.99 ea.
Part # Description PriceNWB-FP-412A Flat Plate: Nut Side 4” W x 12” L $21.49 ea.NWB-FP-412B Flat Plate: Bolt Side 4” W x 12” L $21.49 ea.
NWB-U-35 4” W U-Bracket $35.34 ea.NWB-U-45 4” W U-Bracket $36.90 ea.NWB-U-55 4” W U-Bracket $38.02 ea.NWB-U-57 5” W U-Bracket $46.60 ea.NWB-U-65 5” W U-Bracket $41.38 ea.NWB-U-67 5” W U-Bracket $49.60 ea.NWB-U-75 4” W U-Bracket $48.50 ea.NWB-U-76 5” W U-Bracket $53.45 ea.NWB-U-78 6” W U-Bracket $51.65 ea.NWB-U-79 6” W U-Bracket $61.98 ea.
NWB-U-711 6” W U-Bracket $65.30 ea.NWB-U-811 6” W U-Bracket $66.67 ea.NWB-U-911 6” W U-Bracket $68.88 ea.NWB-U-914 6” W U-Bracket $74.66 ea.NWB-U-915 6” W U-Bracket $73.29 ea.
NWB-U-1114 8” W U-Bracket $81.56 ea.NWB-U-1118 8” W U-Bracket $90.65 ea.NWB-U-1515 8” W U-Bracket $90.23 ea.
Part # Height A Depth B Width CNWB-COR-7818* 8” 18” 7-1/4”NWB-COR-7830* 7-1/4” 30” 7-1/4”NWB-COR-8612* 6” 12” 8”NWB-COR-8818* 8” 18-1/4” 7-3/4”
NWB-COR-11818* 8” 18-1/4” 11-3/4”NWB-COR-161824* 18” 24” 16”NWB-COR-121630* 16” 30” 12”
NWB-COR-7924* 9-1/4” 24” 7-1/4”NWB-COR-9924* 9-1/4” 24” 9-1/4”NWB-COR-7948* 9-1/4” 48” 7-1/4”NWB-COR-3514* 5-1/2” 14” 3-1/2”NWB-COR-7728* 7-3/8” 28-3/8” 7-3/8”NWB-COR-5917* 9-1/4” 17-3/4” 5-1/4”
NWB-COR-52322* 23” 22-3/4” 5-7/8”NWB-COR-71624* 16” 24” 7-3/8”NWB-COR-71833* 18-1/2” 33-3/4” 7-1/4”
UNFINISHEDPrice
$40.83 ea.$55.97 ea.$29.61 ea.$41.76 ea.$55.97 ea.$84.66 ea.$88.10 ea.$52.80 ea.$52.80 ea.$72.38 ea.$24.34 ea.$55.97 ea.$40.83 ea.$65.63 ea.$59.53 ea.
$103.15 ea.
FINISHEDPrice
$53.08 ea.$72.77 ea.$38.49 ea.$54.28 ea.$72.77 ea.
$110.07 ea.$114.54 ea.$68.65 ea.$68.65 ea.$94.06 ea.$31.64 ea.$72.77 ea.$53.08 ea.$85.34 ea.$77.40 ea.
$134.10 ea.
WB-STAINIncludes: (1) 16 oz. can of Brown and (1) 8 oz. can of Dark Brown. Use Dark Brown stain to highlight
cracks, splits and knots.$35.50 ea.
ACCESSORIES
New
Adding rustic flare,warmth, Adding rustic flare,warmth, charm and architectural charm and architectural
detail to any settingdetail to any setting
Bring back that “Old World Appeal”
Decorative Faux Wood Mantels
6”H
8”D
Walnut
Pecan
Back of Mantel
(shown in walnut)
Closed onboth ends
3 Lengths:48”, 54”, 60”
RIVERWOOD STYLETextureresemblingboardlumber
cut from an old sawmill
•Realistic•Lightweightanddurable polyurethane material•1” thickness•Easy to install
194 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Due to raw material cost fluctuations, prices are subject to change
CATALOG IS PRICEDIN U.S. DOLLARS
Part # Finish Size EachM4868-RW-WAL Walnut 48”W x 6”H x 8”D $176.04M4868-RW-PEC Pecan 48”W x 6”H x 8”D $176.04M5468-RW-WAL Walnut 54”W x 6”H x 8”D $198.06M5468-RW-PEC Pecan 54”W x 6”H x 8”D $198.06M6068-RW-WAL Walnut 60”W x 6”H x 8”D $220.05M6068-RW-PEC Pecan 60”W x 6”H x 8”D $220.05
Adding rustic flare,warmth, Adding rustic flare,warmth, charm and architectural charm and architectural
detail to any settingdetail to any setting
3 Lengths:48”, 54”, 60”
HAND HEWN STYLEWith rugged texture
and character
6”H
8”D
Walnut
Pecan
Closed onboth ends
Back of Mantel
(shown in pecan)
Decorative Faux Wood Mantels
Bring back that “Old World Appeal”
•Realistic•Lightweight and durable polyurethane material•1” thickness•Easy to install
Part # Finish Size EachM4868-HH-WAL Walnut 48”W x 6”H x 8”D $176.04M4868-HH-PEC Pecan 48”W x 6”H x 8”D $176.04M5468-HH-WAL Walnut 54”W x 6”H x 8”D $198.06M5468-HH-PEC Pecan 54”W x 6”H x 8”D $198.06M6068-HH-WAL Walnut 60”W x 6”H x 8”D $220.05M6068-HH-PEC Pecan 60”W x 6”H x 8”D $220.05