CEILING OPTIONS -...

CEILING OPTIONS

FlexLam Ceilings Decorative Stamped Steel Ceiling Panels

Faux Wood Beams

137 Phone: 1-800-835-4400 • Fax: 1-800-835-4403 Due to raw material cost fluctuations, prices are subject to change

CEILINGSConsidered the fifth wall in interior

design, FlexLam’s wide variety

of ceiling tile styles and sizes can

add dimension, texture, and visual

interest to any room. Available in

2x2 and 2x4 sizes, for laying into

suspended ceiling grid, or as a direct

glue-up application, these tiles have

the power to define a space.

TEGULAR (2x2 Ceiling Tiles) The embossed part of the design is lower than the suspension grid and the 4 edges are flat to fit nicely into the grid.

GLUE UP (2x2 Ceiling Tiles) Designed with an overlap system (see BIO) to make installation easy, fast and forgiving. These tiles can be used on ceilings and walls.

GLUE UP (2x4 Ceiling Tiles) Designed with an overlap system (see BIO) to make installation easy, fast and forgiving. These tiles can be used on ceilings and walls.

LAY-IN NON-TEGULAR (2x2 Ceiling Tiles)Designed to fit most suspension grid ceiling systems and produces no sag. It is recommended that a standard mineral tile (old or new) be used on top of our lay-in tiles to hold them in place.

ACOUSTIC (Perforated 2x2 Lay-In Ceiling Tiles)2’ x 2’ Lay-In tiles, perforated to increase soundabsorption and offer acoustic qualities, as well as all other 2’ x 2’ Lay-In tile features. Available only in Gloss Black and Gloss White

LAY-IN NON-TEGULAR (2x4 Ceiling Tiles) Designed to fit most suspension grid ceiling systems and produces no sag. It is recommended that a standard mineral tile (old or new) be used on top of our lay-in tiles to hold them in place.

Our BIO has flat edges on two adjoining sides of the FlexLam Ceiling Tile. By orienting all tiles in the same direction and overlapping the tiles, the seams are less noticeable. The placement of the tile is also more flexible so that slight imperfections in the substrate will not affect the finished look. When overlapping four FlexLam Ceiling Tiles, it is necessary to a 1/2” notch in tiles 2 and 3 to avoid a bulge where the panels meet.

MINERAL FIBER (2x2 Lay-In Ceiling Tiles)Flexible mineral fiber ceiling tiles replace standard mineral fiber ceilings with a long-lasting solution. These thermoplastic ceiling tiles have a durable, waterproof surface that is easy to clean. Available in 2’ x 2’ for lay-in ceiling applications, this revolutionary tile is flat with tegular/revealed edges that allow the panel to drop below the grid.

Create Your Formula

Shown: Madison + Gloss White = PCT22G-MAD-WH

See pages 139-142 for patterns. See pages 16-17 for color chart.

FlexLam offers hundreds of

design and finish combinations

suitable for any environment.

Here’s how to create your

formula for success.

Index

Features:• Compatible with 15/16” grid

systems

• Lightweight & easy to install

• Waterproof

• Easy to clean

• Fire retardant

• High impact & abrasion resistant

properties

BIO (Built-In-Overlap)

STEP 1: Choose Any Pattern

STEP 2: Choose Any Finish

FLEXLAM

Shown: Gloss White + Corrugated in AcousticPCT22L-PERF-COR-WH

138 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Due to raw material cost fluctuations, prices are subject to change

CATALOG IS PRICEDIN U.S. DOLLARS

AMERICANAPCT22G-AMER-*

PCT22L-AMER-*

PCT24G-ART-*

PCT22L-ART-*

PCT24L-ART-*

PCT22G-BAL-*

PCT24G-BAL-*

PCT22L-BAL-*

PCT24L-BAL-*

PCT22G-BOS-*

PCT24G-BOS-*

PCT22L-BOS-*

PCT24L-BOS-*

PCT22G-CEL-*

PCT22L-CEL-*

ART DECO BALTIMORE BOSTON CELESTIAL

CELTIC WEAVEPCT22G-CW-*

PCT22L-CW-*

PCT24G-CHA-*

PCT22L-CHA-*

PCT24L-CHA-*

PCT22G-CHE-*

PCT22L-CHE-*

PCT22G-COL-*

PCT22L-COL-*

PCT22L-COR-*

CHARLESTON CHESAPEAKE COLONIAL CORRUGATED

2’ x 2’ & 2’ x 4’ Patterns | Thickness: .030”

CURVATIONPCT22G-CURVA-*

PCT22L-CURVA-*

PCT22L-CURV-* PCT22L-DP-*

PCT24L-DP-*

PCT22G-DOG-*

PCT22L-DOG-*

PCT22L-DOME1-*

CURVES DIAMOND PLATE DOGWOOD DOME 1

TEGULAR (2x2 Ceiling Tiles)

GLUE UP (2x2 Ceiling Tiles)


LAY-IN NON-TEGULAR (2x2 Ceiling Tiles)

See page 138 for full type descriptions. | Patterns represent a 2’ x 2’ section.

ACOUSTIC (Perforated 2x2 Lay-In Ceiling Tiles)



FlexLam CEILING TILES

See page 142 for price chart. | * See pages 16-17 for color chart.





DOME 2PCT22L-DOME2-* PCT22L-DOME3-* PCT24G-FL-*

PCT22L-FL-*

PCT24L-FL-*

PCT22G-GEO-*

PCT22L-GEO-*

PCT22G-HUR-*

PCT22L-HUR-*

DOME 3 FLEUR GEORGIAN HURRICANE

INSET COFFERPCT22L-ICOF-* PCT22G-KELP-*

PCT22L-KELP-*

PCT24G-MAD-*

PCT22L-MAD-*

PCT24L-MAD-*

PCT22L-MAR-* PCT22L-MP-*

KELP MADISON MARQUIS METAL PLATES




MINI DOMEPCT22L-MD-* PCT22L-MQUA-* PCT22G-MOJ-*

PCT22L-MOJ-*

MINI QUADRO MOJAVE PLAIN (Tegular Lay-In)


PCT24G-POR-*

PCT22L-POR-*

PCT24L-POR-*

PORTRAIT

New





PCT22L-PLAIN-WH$9.50 ea.


QUILTEDPCT22L-QUI-*

PCT22G-SAH-*

PCT22L-SAH-*

SAHARA

PCT22G-SOB-*

PCT22L-SOB-*

SOUTH BEACH

PCT22L-RCOF-*

RAISED PANEL COFFERPCT22G-REV-*

PCT22L-REV-*

REVOLUTION

PCT22L-RIB1-*

RIB 1

PCT22L-REGAL-*

PCT24L-REGAL-*

REGALIA

ROSETTEPCT24G-ROS-*

PCT22L-ROS-*

PCT24L-ROS-*

PCT24G-SD-*

PCT22L-SD-*

PCT24L-SD-*

SAN DIEGOPCT22G-SAV-*

PCT24G-SAV-*

PCT22L-SAV-*

PCT24L-SAV-*

SAVANNAH







SQUARE 5 PCT22L-SQ5-* PCT22G-STAR-*

PCT22L-STAR-*

STARPCT22G-STO-*

PCT22L-STO-*

STORMPCT22G-HAM-*

PCT24G-HAM-*

PCT22L-HAM-*

PCT24L-HAM-*

STRIKE


PCT22L-QUA-*

QUADRO




MINERAL

* See pages 16-17 for color chart.


See page 138 for full type descriptions

Add finish code to end of part number ex: PCT22G-AMER-EB

FLEXLAM CEILING ACCESSORIESGRIDMAX™ IS A PATENTED,

SNAP-ON GRID COVER

designed to make grid systems

invisible. It is cost effective and

doesn’t rust or scratch. GridMax

is sized to fit over 15/16” T-bar

suspension grid systems, with

other sizes available by special

order.

Mains, Tees and mouldings are

necessary to cover the entire

grid system. They are packaged

together, to complete 100 square

feet of ceiling, and sold

separately to use as needed.

15/16” (24 MM) GRIDMAX IN PAINTABLE

GRIDMAX IN MOONSTONE COPPER

APPLYING GRIDMAX OVER T-BAR SUSPENSION GRID SYSTEM

For the amount of GridMax needed, measure the perimeter and calculate the square footage.

* See pages 16-17 for color chart.

MINERAL (2x2 Lay-In Ceiling Tiles)








WAVATIONPCT22G-WAV-*

PCT22L-WAV-*

PCT24L-WAV-*

PCT22G-TID-*

PCT22L-TID-*

TIDAL




Price

*Finish2’x 2’

Under 25 Pcs.2’x 2’

25 + Pcs.2’x 4’

Under 25 Pcs.2’x 4’

25 + Pcs.

White (*WH) $11.95 ea. $11.25 ea. $21.50 ea. $21.00 ea.Argent Bronze (*AB) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.Argent Copper (*AC) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.

Argent Gold (*AG) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.Argent Silver (*AS) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.Eccoflex Black (*EB) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.Eccoflex Tan (*ET) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.

Mirror (*M) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.Mirror Gold (*MIRG) $17.50 ea. $16.38 ea. $31.75 ea. $30.85 ea.

All Other Finishes $18.35 ea. $17.75 ea. $36.50 ea. $34.95 ea.

GM210-* (4’ Main Cover)...$2.35 ea.GM220-* (2’ Tee Cover)...$1.15 ea.

GM230-* (4’ Tee Cover)...$2.35 ea.GM250-* (4’ Wall Moulding Cover)...$2.35 ea.

PCT22L-MIN$18.35 ea.

FLEXLAMSTEP 1: Choose Any Pattern STEP 2: Choose Any Finish

Shown: Baltimore + Paintable = PCT22L-BAL-WH





Shown: Georgian + Argent Bronze = PCT22L-GEO-AB




Shown: Corrugated + Crosshatch Silver = PCT22L-COR-CS



(6" Multiple Plate) SM2-215 (2' x 2' lay in)

SM2N-215 (2' x 2' nail up)SM4-215 (2' x 4' nail up)

(6" Multiple Plate)SM2-200 (2' x 2' lay in)

SM2N-200 (2' x 2' nail up)SM4-200 (2' x 4' nail up))









(6" Multiple Plate)SM2-204 (2' x 2' lay in))






• Lightweight, non-combustible panels and accessories are manufactured from tin free steel 30 gauge, .010 thick.

• Chromium treated for superior paint retention.• When material is properly coated, little or no maintenance is required

and cleans with soap and water.• Ceiling panels and cornices are shipped uncoated to allow custom

on-site finishing.• To prevent corrosion, panel must be coated.• Recommended paints are RUST-O-LEUM to maintain the natural metal

appearance, semi-gloss or high gloss oil base paints.• DO NOT USE WATER-BASED PAINT.• HEAVY DUTY SAFETY GLOVES SHOULD BE WORN WHEN HANDLING

PANELS AND CORNICES - EDGES ARE EXTREMELY SHARP.• DUE TO PRODUCTION DYE LOTS, FINISH MAY VARY

ON COLORED TILES & CORNICES.

Our Stamped Ceiling Panels are an exciting interior mix of texture and nostalgia.

Patterns drawn from the past enliven contemporary and traditional styling with their finely crafted detail.



When ordering different finishes, please add the following to the end of the part #: Copper = C, Brass = B, Chrome = CH,White = WH, Lacquer = LAQ







DECORATIVE STAMPED STEEL CEILING PANELS

Finish 2' X 2' Lay-In 2' X 2' Nail Up 2' X 4' Nail UpSteel $7.45 $7.45 $20.30

Lacquered $13.50 $13.50 $28.85White $12.10 $12.10 $29.70Brass $36.70 N/A $70.55

Copper $36.70 N/A $70.55Chrome $36.70 N/A $70.55

CUSTOM ORDERS• If acoustics are a concern, all 2' x 2' tiles are

available perforated. Please inquire for pricing and production time.

New























(24" Multiple Plate)SM4-510 (2' x 4' nail up)















New

HOLD DOWN CLIPS200 PCS. PER BOX

When ordering different finishes, please add the following to the end of the part #: Copper = C, Brass = B, Chrome = CH, White = WH.

(24" x 48" Molded Filler)SM4-4574 -

(24" x 48" Molded Filler)SM4-5007

CONE HEAD NAILS1-1/4" LONG 1 LB. BOXCoverage approx. 200 sq. ft. per box or (25) 4 ft. sections of cornice

(Filler)SM2-235 (2' x 2' lay in)


All Brass, Copper, Chrome and White Panels and Cornices are shipped with a clear baked on enamel finish. Additional finishing is NOT RECOMMENDED.

COPPER COPPER PLATED = CPLATED = C

WHITE WHITE PAINTED = WHPAINTED = WH

Finishes AvAilAble

CHROME PLAT-CHROME PLAT-ED = CHED = CH

LACQUERLACQUERPLATED = LAQPLATED = LAQ







Steel Only







Stainless Steel Only

Powder Coated and Vintage Hand Painted Antique available - please inquire


BRASS BRASS PLATED = BPLATED = B




FILLERS COFFERED CEILING TILE

ACCESSORIES

Part # PriceSM-CLIP $50.50 box

SM-NAIL - Steel - $6.50 boxSM-NAIL-B - Brass - $11.25 boxSM-NAIL-C - Copper - $11.25 boxSM-NAIL-CH - Chrome - $11.25 boxSM-NAIL-WH - White - $8.60 boxSM-NAIL-LAQ - Lacquered - $11.25 box

2' X 2' Lay-InSM-508 1-1/2" Deep$10.15 ea.

2' X 2' Nail Up SM-508-N $10.15 ea.




New

Available in 4 ft. lengths

• Must be painted with an oil based paint • For a metal finish, you can use

RUST-O-LEUM aluminum paintWhen ordering different finishes, please

add the following to the end of the part #: Copper = C, Brass = B, Chrome = CH,

White = WH, Laquer = LAQ.

STEEL CORNICE

Outwater Plastics offers a wide selection of decorative stamped steel cornice mouldings in a variety of finishes and sizes (please see page 148 for additional finishes). All cornice mouldings are available in 4' lengths and range in projection size from 1-1/2" to 15-1/2". Use a cornice application to add the finishing touch to your new metal ceiling project.

1515

12121616

1717

1818

1313

1414

NOTE: This moulding is a right angle girder nosing.

11

22

33

55

66

77

88

99

1010

1111

44


DECORATIVE STAMPED STEEL CORNICES

Part #Face(A)

Projection(B)

Height(C) Steel Lacquer White Brass Copper Chrome

1 SM-800 1-1/2" 1-1/2" 1-1/2" $7.98 ea. $9.89 ea. $9.89 ea. $24.20 ea. $24.20 ea. $24.20 ea.2 SM-810 2-5/8" 2" 2" $7.98 ea. $9.89 ea. $9.89 ea. $24.20 ea. $24.20 ea. $24.20 ea.3 SM-803 3-1/2" 2-1/2" 2-1/2" $8.42 ea. $10.32 ea. $10.32 ea. $28.00 ea. $28.00 ea. $28.00 ea.4 SM-903 3-1/2" 2-1/2" N/A $8.42 ea. $10.32 ea. $10.32 ea. $23.45 ea. $23.45 ea. $23.45 ea.5 SM-801 3-5/8" 2-1/2" 2-1/2" $8.20 ea. $10.10 ea. $10.10 ea. $28.00 ea. $28.00 ea. $28.00 ea.6 SM-909 3-1/2" 3" 3" $8.42 ea. $10.32 ea. $10.32 ea. $28.00 ea. $28.00 ea. $28.00 ea.7 SM-802 4-1/3" 3-1/2" 3-1/2" $8.53 ea. $10.42 ea. $10.42 ea. $28.00 ea. $28.00 ea. $28.00 ea.8 SM-804 4-1/2" 4" 4" $8.42 ea. $10.32 ea. $10.32 ea. $28.00 ea. $28.00 ea. $28.00 ea.9 SM-905 7-1/4" 4" 4" $10.32 ea. $12.22 ea. $12.22 ea. $40.10 ea. $40.10 ea. $40.10 ea.

10 SM-705 6-1/4" 4" 4" $10.32 ea. $12.22 ea. $12.22 ea. $40.77 ea. $40.77 ea. $40.77 ea.11 SM-904 9" 6" 6" $ 12.49 ea. $14.40 ea. $14.40 ea. $56.20 ea. $56.20 ea. $56.20 ea.12 SM-906 9-1/4" 6" 6" $12.49 ea. $14.40 ea. $14.40 ea. $56.20 ea. $56.20 ea. $56.20 ea.13 SM-806 9-1/4" 6" 6" $12.49 ea. $14.40 ea. $14.40 ea. $56.20 ea. $56.20 ea. $56.20 ea.14 SM-707 9" 6-1/4" 6-5/8" $12.49 ea. $14.40 ea. $14.40 ea. $56.20 ea. $56.20 ea. $56.20 ea.15 SM-808 11-1/4" 8-3/4" 8-3/4" $16.07 ea. $17.97 ea. $17.97 ea. $56.20 ea. $56.20 ea. $56.20 ea.16 SM-807 13-1/4" 9-1/2" 9-1/2" $19.00 ea. $20.91 ea. $20.91 ea. $66.70 ea. $66.70 ea. $66.70 ea.17 SM-706 14" 9" 9" $19.00 ea. $20.91 ea. $20.91 ea. $66.70 ea. $66.70 ea. $66.70 ea.18 SM-907 15-1/2" 10-1/2" 10-1/2" $19.00 ea. $20.91 ea. $20.91 ea. $66.70 ea. $66.70 ea. $66.70 ea.

A

B

C

D

* Closed on one end*

Walnut

Medium Oak

Unfinished

Hand Hewn Beam SeriesHand Hewn Beam Series13’ Lengths

RUBBER BEAM STRAPPING

3 Finishes Available

d

d

d

dOur Rustic Beams allow you to bring back that "Old World Style"and to any room with their rustic warmth and charm. These beamsare lightweight and easy to install.

Rustic Beams were fallen logs, hewn into shape using a broad axe.Forging ahead and settling the new frontier, early settlers did not haveaccess to mills and machinery. They shaped the beams used in their homes andbusiness by hand, using their axes and small tools. This resulted in a beam withrugged texture and character.

Due to photographic imaging,products may vary slightly in color.

All sizes listed are approximate.Samples are available, please inquire.



THE RUSTIC BEAM COLLECTION

Part # Width

AHeight

BTop Inside

Width CBottom Inside

Width DHH20-55* 5” 5” 2-3/4” 2-1/4”HH30-85* 8” 5-1/8” 6-1/4” 6”HH40-87* 7-1/2” 6-5/8” 5” 4-7/8”

WALNUT / MEDIUM OAKPrice 6 + Pieces

$174.60 ea. $161.13 ea.$203.01 ea. $187.71 ea.$217.28 ea. $200.55 ea.

UNFINISHEDPRICE 6 + Pieces

$150.49 ea. $138.22 ea.$181.25 ea. $168.65 ea.$190.70 ea. $170.75 ea.

* For unfinished add -UNF to the part number* For medium oak add -MEDOAK to the part number

Flat Rate Shipping in the continental U.S.Up to 4 Beams $175.00, 5+ Beams $275.00

Single StrapVINSTRAP $17.13 ea.(Black/Silver)42” L x 1-1/2” W Bolt Spacing: 1-3/8” (2-1/4” C-C)

Double StrapDB-STRAP $29.05 ea.(Black/Silver)41” L x 2-7/8” W Bolt Spacing: 4” (4-3/4” C-C)

ACCESSORIES

New

* For unfinished add -UNF to the part number


Unfinished Finished

A

B

C

D

16’ & 20’ LengthsOld World Beam SeriesOld World Beam Series

* Open on both ends*

POLYURETHANE U-BRACKET

Flange

Due to photographic imaging, products may vary slightly in color.All sizes listed are approximate. Samples are available, please inquire.


THE RUSTIC BEAM COLLECTION

Part # Width

AHeight

BTop Inside


Width D LengthOWB-44* 4-1/2” 4-1/2” 2” 2” 16’OWB-57* 5-1/4” 7-1/4” 3-3/8” 3-3/8” 20’OWB-76* 7” 6-1/2” 4-1/4” 4-1/4” 16’OWB-79* 7-1/4” 9” 4-1/4” 4-1/4” 20’

OWB-1513* 15-1/4” 13” 12” 12” 16’

FINISHEDPrice

$162.24 ea. $314.02 ea.$256.44 ea.$359.81 ea.$565.22 ea.

UNFINISHEDPrice

$124.80 ea.$241.55 ea.$197.27 ea.$276.78 ea.$434.78 ea.

Part # Description PriceOWB-U-44 4” W U-Bracket $41.88 ea.OWB-U-57 5” W U-Bracket $46.60 ea.OWB-U-76 5” W U-Bracket $55.66 ea.

OWB-UF-76 Flange - Bracket $55.66 ea.OWB-U-79 6” W U-Bracket $62.26 ea.

OWB-UF-79 Flange - Bracket $62.26 ea.OWB-U-1513 10” W U-Bracket $120.14 ea.

OWB-UCH-1513 Chevron Bracket $133.36 ea.

WB-STAINIncludes: (1) 16 oz. can of Brown and (1) 8 oz. can of Dark Brown. Use Dark Brown stain to highlight

cracks, splits and knots.$35.50 ea.

ACCESSORIESNew

* Closed on one end*

Modern Beam SeriesModern Beam Series13’ Lengths

d

d

d

d

Our Contemporary offers a smooth milled appearance. Creating a sense of casual elegance adding visual interest with their clean lines.

A

B

C

D

Due to photographic imaging, products may vary slightly in color.All sizes listed are approximate. Samples are available, please inquire.


Walnut

Medium Oak

Unfinished

RUBBER BEAM STRAPPING



THE CONTEMPORARY BEAM COLLECTION

Part # Width

AHeight

BTop Inside


Width DMOD-BEAM10* 4-3/8” 2-1/4” 3” 2-3/4”MOD-BEAM20* 5-7/8” 3-7/8” 4-3/4” 3-1/2”MOD-BEAM30* 7-7/8” 5-7/8” 6-5/8” 4”

WALNUT / MEDIUM OAKPrice 6 + Pieces

$175.38 ea. $160.33 ea.$197.79 ea. $183.01 ea.$259.66 ea. $238.69 ea.

UNFINISHEDPRICE 6 + Pieces

$143.85 ea. $132.31 ea.$175.88 ea. $161.90 ea.$219.26 ea. $200.45 ea.

* For unfinished add -UNF to the part number* For medium oak add -MEDOAK to the part number

Flat Rate Shipping in the continental U.S.Up to 4 Beams $175.00, 5+ Beams $275.00

Single StrapVINSTRAP $17.13 ea.(Black/Silver)42” L x 1-1/2” W Bolt Spacing: 1-3/8” (2-1/4” C-C)

Double StrapDB-STRAP $29.05 ea.(Black/Silver)41” L x 2-7/8” W Bolt Spacing: 4” (4-3/4” C-C)

ACCESSORIES

New



New World Beam SeriesNew World Beam Series56”, 12’, 14’, 16’, 20’ & 22’ Lengths

* Open on both ends*


Unfinished Finished

A

B

C

D

POLYURETHANEU-BRACKETS

& FLAT PLATESU-Bracket

Flat Plate CORBELSA

CB

Due to photographic imaging, products may vary slightly in color. All sizes listed are approximate.

Samples are available, please inquire.


THE CONTEMPORARY BEAM COLLECTION

Part # Width

AHeight

BTop Inside


Width D LengthsNWB-35* 3-1/2” 5-1/2” 1-1/8” 1-1/8” 22’NWB-45* 4” 5-3/4” 2-1/8” 2-1/8” 16’NWB-55* 5-1/2” 5-1/2” 2-5/8” 2-5/8” 20’NWB-57* 5-1/2” 7-1/2” 3-3/8” 3-3/8” 20’NWB-65* 6” 5” 3-1/2” 3-1/2” 20’NWB-67* 6” 7-1/4” 3-1/2” 3-1/2” 12’NWB-69* 6” 9” 3-1/8” 3-1/8” 56”NWB-75* 7-3/4” 5-1/2” 6” 6” 14’NWB-76* 7-1/2” 6-1/2” 5” 5” 20’NWB-78* 6-1/2” 7-1/2” 4” 4” 20’NWB-79* 7-1/4” 9-1/4” 4-1/8” 4-1/8” 20’

NWB-711* 7-1/4” 11” 4-3/8” 4-3/8” 20’NWB-811* 8” 11-1/2” 4-7/8” 4-7/8” 14’NWB-911* 9-1/4” 11” 6-1/2” 6-1/2” 20’NWB-914* 9” 14-1/2” 6-3/4” 6-3/4” 20’NWB-915* 9-1/2” 14-3/4” 6-3/4” 6-3/4” 14’

NWB-1114* 11-3/4” 14-3/4” 9” 9” 14’NWB-1118* 11-1/2” 18-3/4” 8-1/4” 8-1/4” 16’NWB-1515* 15-1/8” 15-1/8” 11-1/2” 11-1/2” 16’

FINISHEDPrice

$210.13 ea. $163.55 ea.$235.51 ea.$314.02 ea.$215.88 ea.$188.41 ea.$85.48 ea.

$201.49 ea.$314.02 ea.$320.56 ea.$359.90 ea.$431.77 ea.$311.40 ea.$464.47 ea.$562.61 ea.$380.09 ea.$439.62 ea.$628.02 ea.$607.09 ea.

UNFINISHEDPrice

$161.64 ea.$125.81 ea.$181.16 ea.$241.55 ea.$166.07 ea.$144.92 ea.$65.76 ea.

$154.99 ea.$241.55 ea.$246.58 ea.$276.78 ea.$332.12 ea.$239.53 ea.$357.29 ea.$432.78 ea.$292.38 ea.$338.17 ea.$483.10 ea.$466.99 ea.

Part # Description PriceNWB-FP-412A Flat Plate: Nut Side 4” W x 12” L $21.49 ea.NWB-FP-412B Flat Plate: Bolt Side 4” W x 12” L $21.49 ea.

NWB-U-35 4” W U-Bracket $35.34 ea.NWB-U-45 4” W U-Bracket $36.90 ea.NWB-U-55 4” W U-Bracket $38.02 ea.NWB-U-57 5” W U-Bracket $46.60 ea.NWB-U-65 5” W U-Bracket $41.38 ea.NWB-U-67 5” W U-Bracket $49.60 ea.NWB-U-75 4” W U-Bracket $48.50 ea.NWB-U-76 5” W U-Bracket $53.45 ea.NWB-U-78 6” W U-Bracket $51.65 ea.NWB-U-79 6” W U-Bracket $61.98 ea.

NWB-U-711 6” W U-Bracket $65.30 ea.NWB-U-811 6” W U-Bracket $66.67 ea.NWB-U-911 6” W U-Bracket $68.88 ea.NWB-U-914 6” W U-Bracket $74.66 ea.NWB-U-915 6” W U-Bracket $73.29 ea.

NWB-U-1114 8” W U-Bracket $81.56 ea.NWB-U-1118 8” W U-Bracket $90.65 ea.NWB-U-1515 8” W U-Bracket $90.23 ea.

Part # Height A Depth B Width CNWB-COR-7818* 8” 18” 7-1/4”NWB-COR-7830* 7-1/4” 30” 7-1/4”NWB-COR-8612* 6” 12” 8”NWB-COR-8818* 8” 18-1/4” 7-3/4”

NWB-COR-11818* 8” 18-1/4” 11-3/4”NWB-COR-161824* 18” 24” 16”NWB-COR-121630* 16” 30” 12”

NWB-COR-7924* 9-1/4” 24” 7-1/4”NWB-COR-9924* 9-1/4” 24” 9-1/4”NWB-COR-7948* 9-1/4” 48” 7-1/4”NWB-COR-3514* 5-1/2” 14” 3-1/2”NWB-COR-7728* 7-3/8” 28-3/8” 7-3/8”NWB-COR-5917* 9-1/4” 17-3/4” 5-1/4”

NWB-COR-52322* 23” 22-3/4” 5-7/8”NWB-COR-71624* 16” 24” 7-3/8”NWB-COR-71833* 18-1/2” 33-3/4” 7-1/4”

UNFINISHEDPrice

$40.83 ea.$55.97 ea.$29.61 ea.$41.76 ea.$55.97 ea.$84.66 ea.$88.10 ea.$52.80 ea.$52.80 ea.$72.38 ea.$24.34 ea.$55.97 ea.$40.83 ea.$65.63 ea.$59.53 ea.

$103.15 ea.

FINISHEDPrice

$53.08 ea.$72.77 ea.$38.49 ea.$54.28 ea.$72.77 ea.

$110.07 ea.$114.54 ea.$68.65 ea.$68.65 ea.$94.06 ea.$31.64 ea.$72.77 ea.$53.08 ea.$85.34 ea.$77.40 ea.

$134.10 ea.

WB-STAINIncludes: (1) 16 oz. can of Brown and (1) 8 oz. can of Dark Brown. Use Dark Brown stain to highlight

cracks, splits and knots.$35.50 ea.

ACCESSORIES

New

Adding rustic flare,warmth, Adding rustic flare,warmth, charm and architectural charm and architectural

detail to any settingdetail to any setting

Bring back that “Old World Appeal”

Decorative Faux Wood Mantels

6”H

8”D

Walnut

Pecan

Back of Mantel

(shown in walnut)

Closed onboth ends

3 Lengths:48”, 54”, 60”

RIVERWOOD STYLETextureresemblingboardlumber

cut from an old sawmill

•Realistic•Lightweightanddurable polyurethane material•1” thickness•Easy to install



Part # Finish Size EachM4868-RW-WAL Walnut 48”W x 6”H x 8”D $176.04M4868-RW-PEC Pecan 48”W x 6”H x 8”D $176.04M5468-RW-WAL Walnut 54”W x 6”H x 8”D $198.06M5468-RW-PEC Pecan 54”W x 6”H x 8”D $198.06M6068-RW-WAL Walnut 60”W x 6”H x 8”D $220.05M6068-RW-PEC Pecan 60”W x 6”H x 8”D $220.05

Adding rustic flare,warmth, Adding rustic flare,warmth, charm and architectural charm and architectural

detail to any settingdetail to any setting

3 Lengths:48”, 54”, 60”

HAND HEWN STYLEWith rugged texture

and character

6”H

8”D

Walnut

Pecan

Closed onboth ends

Back of Mantel

(shown in pecan)

Decorative Faux Wood Mantels

Bring back that “Old World Appeal”

•Realistic•Lightweight and durable polyurethane material•1” thickness•Easy to install

Part # Finish Size EachM4868-HH-WAL Walnut 48”W x 6”H x 8”D $176.04M4868-HH-PEC Pecan 48”W x 6”H x 8”D $176.04M5468-HH-WAL Walnut 54”W x 6”H x 8”D $198.06M5468-HH-PEC Pecan 54”W x 6”H x 8”D $198.06M6068-HH-WAL Walnut 60”W x 6”H x 8”D $220.05M6068-HH-PEC Pecan 60”W x 6”H x 8”D $220.05

CEILING OPTIONS -...

Documents

Transcript of CEILING OPTIONS -...