Post on 26-Dec-2015
description
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Knuckle joint assembly
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Knuckle joint details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Bushed-pin type flanged coupling
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
V – block assembly
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Cotter joint assembly
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Cotter joint with a gib assembly
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Split muff coupling assembly
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Flange pipe joint assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Geneva mechanism assembly
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Geneva mechanism details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Belt tighter assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Yoke assembly & details
(Universal Joint)
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Plummer block assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Mounting
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Flanged coupling
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Foot step bearing
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Oldhams coupling
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Universal coupling
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Plummer block assembly & details
Body
Keep plate
Piston rod
Brasses
Bolt
Nut
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Base
Cap
Double bearing assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
End Plate
Disk
Nut
Fixture assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Nut
Lock nut
Brasses
Body
Cap
Bolt Plummer block assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Press tool assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Pulley
Bushing
Support
Bolt
Pulley support assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Bolt
Bracket Pivot
U-support
Castle nut
Washer
Bushing
Self-locking nut
Shock assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and assemble them to create Assembly.
Base plate
Support
Wheel
Wheel support
assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures
and assemble them to create Assembly.
Drill jig assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures
and assemble them to create Assembly.
Screw jack assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.
Clapper tool assembly & details
University of Pune Practical Examination – Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering Duration: 02 Hrs. Max. Marks: 50 M
Single tool post assembly & details