Post on 07-Mar-2021
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 1 of 148 January 2016
BS identifier Title Committee Status Final
Review Outcome
BS 5N 100-5:2006 Aircraft oxygen systems and
equipment -- Guide to fire and explosion hazards associated with
oxygen, including handling, storage and replenishment
ACE/1 confirmed (2011)
BS M 93:2005 Protection of magnesium-rich alloys
against corrosion. Specification
ACE/1 confirmed (2011) Reconfirm
BS 2M 47:1990 Specification for retreading of cross
ply tyres for aircraft
ACE/1 confirmed (2011) Reconfirm
BS 2A 241:2005+A2:2011
General requirements for steel protruding-head bolts of tensile
strength 1250 MPa (180000 lbf/in2) or greater. Specification
ACE/12 current Confirm
BS M 33:1970 Specification for dimensions of elastomeric toroidal sealing rings
(inch series) to Class 1 tolerances
for aircraft
ACE/12 replaced by BS M 48:1976
BS A 275-A
280:1981+A2:2011
Specification for hexagon self-
locking nuts with non-metallic locking inserts. Metric series
ACE/12 current Confirm
BS SP 13; 14; 15 and
16:1949+A4:2011
Specification for washers for
aircraft purposes. (primarily for packing purposes)
ACE/12 current Confirm
BS A 274:1981 Specification for procurement of alloy steel bolts, metric, with a
minimum tensile strength of 1100
MPa
ACE/12 current Confirm
BS 2A 293:2005 Procurement of self-locking nuts
with non-metallic locking elements.
Metric series. Specification
ACE/12 confirmed (2011) Reconfirm
BS SP 10 &
11:1949+A3:2011
Specification for washers for
aircraft purposes (primarily for facing purposes)
ACE/12 current Confirm
BS SP 126 &
127:1959+A3:2011
Washers for unified hexagons for
aircraft (primarily for facing purposes)
ACE/12 current Confirm
BS SP 57 and
58:1955+A3:2011
Specifications for Rivet burrs for
aircraft
ACE/12 current Confirm
BS SP 86:1959 100$0D countersunk head steel rivets for aircraft
ACE/12 current Confirm
BS SP 76:1958 Snap head steel rivets for aircraft ACE/12 current Confirm
BS M 44:1974 Specification for identification of aircraft servicing, maintenance,
ground handling and safety/hazard
points
ACE/57 confirmed (2011) Reconfirm
BS 3G 100-
2.3.13:1973
Specification for general
requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Resistance to fire in designated fire
zones
ACE/58 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 2 of 148 January 2016
BS 3G 100-2.3.4:1972 Specification for general
requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Differential pressure requirements
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-2.3.2:1970 Specification for general
requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Temperature-pressure
requirements
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-2.3.0:1972 Specification for general requirements for equipment for use
in aircraft. All equipment.
Environmental conditions -- Standard test requirements
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-2.3.6:1972 Specification for general
requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Acceleration requirements
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-
2.3.12:1991
Specification for general
requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Fluid contamination
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-
2.3.14:1973
Specification for general
requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Acoustic vibration
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-2.3.5:1972 Specification for general
requirements for equipment for use in aircraft. All equipment.
Environmental conditions --
Explosion-proofness
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-2.3.7:1972 Specification for general
requirements for equipment for use in aircraft. All equipment.
Environmental conditions --
Tropical exposure
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-
2.3.11:1973
Specification for general
requirements for equipment for use
in aircraft. All equipment. Environmental conditions -- Water-
proofness
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-
2.3.10:1974
Specification for general
requirements for equipment for use
in aircraft. All equipment. Environmental conditions -- Impact
icing
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-2.3.9:1972 Specification for general requirements for equipment for use
in aircraft. All equipment. Environmental conditions -- Ice
formation
ACE/58 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 3 of 148 January 2016
BS 3G 100-2.3.3:1972 Specification for general
requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Mould growth
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-2.3.1:1969 Specification for general
requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Vibration
ACE/58 confirmed (2011)
BS 3G 100-2.3.8:1972 Specification for general
requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Salt
mist
ACE/58 confirmed (2011) Reconfirm
BS 3G 100-2.2:1972 Specification for general
requirements for equipment for use
in aircraft. All equipment -- Magnetic influence
ACE/58 confirmed (2011) Reconfirm
BS G 246:1991 Specification for cable ties for installation under controlled tension
on aircraft electric cable harnesses
ACE/6 partially replaced by parts of BS EN 4056 &
BS EN 4057
Confirm
BS G 194:1965 Specification for lever-operated manual switches for aircraft
ACE/6 replaced by BS G 224:1978
Confirm
BS G 200:1967 Specification for miniature lever-
operated manual switches
ACE/6 replaced by BS G
224:1978
Confirm
BS G 154:1958 Screws with captive washers for
aircraft
ACE/6 partially replaced by
BS G 203:1967
Confirm
BS G 264:2005 Specification for avionic data transmission interface systems.
Utilities bus
ACE/6/-/9 confirmed (2011) Reconfirm
BS 5L 101:2011 Procedure for inspection, testing and acceptance of aluminium-base
and magnesium-base ingots and castings
ACE/61 current
BS 3L 500:2011 Procedure for inspection, testing
and acceptance of wrought magnesium base alloys
ACE/61 current
BS 2S
201:2004+A1:2011
Carbon steel wire rod, patented
cold drawn carbon steel wire and springs. High duty unground wire.
Specification
ACE/61/-/15 current Confirm
BS 2S
202:2004+A1:2011
Carbon steel wire rod, patented
cold drawn carbon steel wire and springs. High duty ground wire.
Specification
ACE/61/-/15 current Confirm
BS 3B 27:2009 Specification for copper-zinc-aluminium-nickel-silicon alloy tube
ACE/61/-/16 current Confirm
BS 7L 37:1989 Specification for wire for solid cold-
forged rivets of aluminium-copper-
magnesium-silicon-manganese alloy (for use in the solution
treated and naturally aged condition) (not exceeding 10 mm
diameter) (Cu 4.4, Mg 0.5, Si 0.7,
Mn 0.8) (2014A)
ACE/61/-/24 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 4 of 148 January 2016
BS L 102:1971 Specification for bars and extruded
sections of aluminium-copper-magnesium-silicon-manganese
alloy (solution treated and aged at room temperature) (not exceeding
200 mm diameter or minor
sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
ACE/61/-/24 replaced by BS EN
2100:1992
BS L 119:1975 Specification for ingots and
castings of aluminium-copper-nickel-manganese-titanium-
zirconium-cobalt-antimony alloy
(solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti
0.2, Zr 0.2, Co 0.2, Sb 0.2)
ACE/61/-/24 confirmed (2011)
BS L 117:1975 Specification for tube of aluminium-
magnesium-silicon-copper-
chromium alloy (solution treated and artificially aged: not tested
hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu
0.28, Cr 0.2)
ACE/61/-/24 confirmed (2011) Reconfirm
BS L 118:1975 Specification for tube of aluminium-magnesium-silicon-copper-
chromium alloy (solution treated
and artificially aged: tested hydraulically) (not exceeding 10
mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
ACE/61/-/24 confirmed (2011)
BS L 114:1971 Specification for tube of aluminium-
magnesium-silicon-manganese alloy (solution treated and
precipitation treated) (not exceeding 10 mm wall thickness)
(suitable for welding) (Mg 0.8, Si 1,
Mn 0.7)
ACE/61/-/24 confirmed (2011)
BS L 105:1971 Specification for tube of aluminium-
copper-magnesium-silicon-manganese alloy (solution treated
and aged at room temperature)
(not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7,
Mn 0.8)
ACE/61/-/24 confirmed (2011)
BS L 160:1976 Specification. Bars and extruded sections of aluminium-zinc-
magnesium-copper-chromium alloy (solution treated and artificially
aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
ACE/61/-/24 replaced by BS EN 2127:1992
BS L 111:1971 Specification for bars and extruded
sections of aluminium-magnesium-silicon-manganese alloy (solution
treated and precipitation treated)
(suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
ACE/61/-/24 replaced by BS EN
2326:1992
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 5 of 148 January 2016
BS 2L 77:1971 Specification for forging stock and
forgings of aluminium-copper-magnesium-silicon-manganese
alloy (solution treated and precipitation treated) (Cu 4.4, Mg
0.5, Si 0.7, Mn 0.8)
ACE/61/-/24 confirmed (2011)
BS 2L 95:1971 Specification for plate of aluminium-zinc-magnesium-
copper-chromium alloy (solution treated, controlled stretched and
precipitation treated) (Zn 5.8, Mg
2.5, Cu 1.6, Cr 0.15)
ACE/61/-/24 replaced by BS EN 2126:1992
BS 3L 63:1971 Specification for tube of aluminium-
copper-mangesium-silicon-
manganese alloy (solution treated and precipitation treated) (Cu 4.4,
Mg 0.5, Si 0.7, Mn 0.8)
ACE/61/-/24 confirmed (2011)
BS 4L 56:1986 Specification for tube of aluminium-2$9D% magnesium alloy (temper
designation-O) (seamless: tested
hydraulically) (not exceeding 12 mm wall thickness)
ACE/61/-/24 confirmed (2011)
BS 2L 126:1970 Specification for ingots and
castings of magnesium-cerium-zinc-zirconium alloy (precipitation
treated) (rare earth metals 3.0, Zn
2.3, Zr 0.6)
ACE/61/-/24 confirmed (2011)
BS L 154:1977 Specification for ingots and
castings of aluminium-copper-silicon alloy (solution treated and
aged at room temperature) (Cu 4,
Si 1)
ACE/61/-/24 confirmed (2011) Reconfirm
BS L 155:1977 Specification for ingots and
castings of aluminium-copper-
silicon alloy (solution treated and artificially aged) (Cu 4, Si 1)
ACE/61/-/24 confirmed (2011)
BS 4L 54:1986 Specification for tube of 99% aluminium (cold drawn: seamless:
tested hydraulically) (not exceeding 12 mm wall thickness)
ACE/61/-/24 confirmed (2011)
BS 5L 36:1985 Specification for wire for solid, cold-forged rivets of 99.5%
aluminium (not exceeding 10 mm
diameter)
ACE/61/-/24 confirmed (2011) Reconfirm
BS 6L 16:1985 Specification for sheet and strip of
99% aluminium (temper designation H14 or H24)
ACE/61/-/24 confirmed (2011)
BS 6L 17:1985 Specification for sheet and strip of
99% aluminium (temper designation-O)
ACE/61/-/24 confirmed (2011)
BS 2HR 650:2011 Specification for high expansion
heat-resisting steel bar and wire for the manufacture of bolts, studs,
set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V
0.3) (limiting ruling section 50 mm)
ACE/61/-/48 current Confirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 6 of 148 January 2016
BS 3HR 502:2011 Specification for nickel-chromium-
cobalt-titanium- aluminium heat-resisting alloy cold drawn and
solution treated wire for springs and springs (Nickel base, Cr 19.5,
Co 18.0, Ti 2.5, Al 1.5)
ACE/61/-/48 current Confirm
BS 3HR 504:2011 Specification for nickel-chromium-titanium heat-resisting alloy bar
and wire for rivets and rivets (Maximum diameter or minor
sectional dimension 20 mm) (Nickel
base, Cr 19.5, Ti 0.4)
ACE/61/-/48 current Confirm
BS 3HR 503:2011 Specification for nickel-chromium-
cobalt-titanium- aluminium heat-
resisting alloy wire for thread inserts (Nickel base, Cr 19.5, Co
18.0, Ti 2.5, Al 1.5) (0.45 mm to 2 mm diameter)
ACE/61/-/48 current Confirm
BS 3HR 501:2011 Specification for nickel-chromium-
cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for
springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
ACE/61/-/48 current Confirm
BS 2HR 209:2011 Specification for nickel-chromium-
cobalt-molybdenum- titanium-
aluminium heat-resisting alloy plate, sheet and strip (Nickel base,
Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)
ACE/61/-/48 current
BS 2HR 404:2011 Specification for nickel-cobalt-chromium-molybdenum- titanium-
aluminium heat-resisting alloy
seamless tubes (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
ACE/61/-/48 current Confirm
BS 2HR 240:2011 Specification for cobalt-chromium-
tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip
(Cobalt base, Cr 20, W 15, Ni 10,
Mn 1.5)
ACE/61/-/48 current Confirm
BS 2HR 402:2011 Specification for nickel-chromium-cobalt-titanium-aluminium heat-
resisting alloy seamless tubes (Nickel base, Cr 19.5, Co 18.0, Ti
2.5, Al 1.5)
ACE/61/-/48 current Confirm
BS 3HR 401:2011 Specification for nickel-chromium-titanium-aluminium heat-resisting
alloy seamless tubes (Nickel base,
Cr 19.5, Ti 2.2, Al 1.4)
ACE/61/-/48 current Confirm
BS 2HR 403:2011 Specification for nickel-chromium-
titanium heat-resisting alloy seamless tubes (Nickel base, Cr
19.5, Ti 0.4)
ACE/61/-/48 current Confirm
BS 3TA 11:2009 Specification for bar and section for
machining of titanium-aluminium -
vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling
section 150 mm)
ACE/61/-/49 partially replaced by
BS EN 3355:2012
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 7 of 148 January 2016
BS F 159:2006 Properties of elastomeric toroidal
sealing rings ("O" rings) manufactured from oil resistant
silicone rubber material conforming to BS F 153. Specification
ACE/65 confirmed (2011) Reconfirm
BS F 162:2006 Properties of elastomeric toroidal
sealing rings ("O" rings)
manufactured from ethylene-propylene rubber material
conforming to BS F 156. Specification
ACE/65 confirmed (2011) Reconfirm
BS F 164:2006 Properties of elastomeric toroidal
sealing rings ("O" rings) manufactured from fluorosilicone
rubber material released to BS F 154. Specification
ACE/65 confirmed (2011) Reconfirm
BS PL 4:2005 Properties of unsaturated polyester resins for low pressure laminating
of high strength fibre reinforced composites. Specification
ACE/65 confirmed (2011) Reconfirm
BS PL 8:2005 Fibrous polyamide material for use as an explosion suppressant and as
a baffle material in aircraft fuel tanks. Specification
ACE/65 confirmed (2011) Reconfirm
BS PL 9:2005 Fibrous polyamide material for use as an explosion suppressant and as
a baffle material in aircraft fuel
tanks. Test methods
ACE/65 confirmed (2011) Reconfirm
BS F 136:1989 Specification for pigmented
chlorosulphonated polyethylene rubber-coated nylon fabric (190
g/m$u2) for aerospace purposes
ACE/65 confirmed (2011) Reconfirm
BS PL 6:2005 Properties of unsaturated polyester
resins for low pressure laminating of glass fibre reinforced
composites. Specification
ACE/65 confirmed (2011) Reconfirm
BS PL 5:2005 Unsaturated polyester resins for
low pressure laminating of high
strength fibre reinforced composites. Test methods
ACE/65 confirmed (2011) Reconfirm
BS PL 7:2005 Unsaturated polyester resins for low pressure laminating of glass
fibre reinforced laminates. Test methods
ACE/65 confirmed (2011) Reconfirm
BS F 156:2006 Properties of fluid resistant
ethylene-propylene rubber sheet, mouldings and extrusions.
Specification
ACE/65 confirmed (2011) Reconfirm
BS 4F 124:1996 Specification for woven nylon 6.6 narrow fabrics for aerospace
purposes (nominally 940 dtex yarns)
ACE/65 confirmed (2011) Reconfirm
BS F 157:2006 Properties of high tear strength
silicone rubber sheet, mouldings and extrusions. Specification
ACE/65 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 8 of 148 January 2016
BS F 152:2006 Properties of silicone rubber sheet,
mouldings and extrusions (general purpose). Specification
ACE/65 confirmed (2011) Reconfirm
BS F 153:2006 Properties of oil resistant silicone
rubber sheet, mouldings and extrusions. Specification
ACE/65 confirmed (2011) Reconfirm
BS F 154:2006 Properties of fluorosilicone rubber sheet, mouldings and extrusions.
Specification
ACE/65 confirmed (2011) Reconfirm
BS 4F 123:1996 Woven nylon narrow fabrics for aerospace purposes (nominally 235
dtex yarns)
ACE/65 confirmed (2011) Reconfirm
BS 3F 121:1995 Specification for metallic slide fasteners for aerospace purposes
ACE/65 confirmed (2011) Reconfirm
BS F 143:1993 Specification for para-aramid
braided cords for aerospace
purposes
ACE/65 confirmed (2011) Reconfirm
BS 2F 52:1959 Flax reinforcement webbing for
aeronautical purposes
ACE/65 confirmed (2011) Reconfirm
BS 2X 34:1998 Specification for two component
polyurethane finish for aerospace purposes
ACE/65/-/3 confirmed (2009)
BS G 257-1:1998 Design of electromagnetic hazard protection of civil aircraft -- Guide
to theory and threats
ACE/66 confirmed (2011) Reconfirm
BS G 257-2:1998 Design of electromagnetic hazard protection of civil aircraft -- Guide
to protection
ACE/66 confirmed (2011)
BS 8412:2004 Equipment for crop protection. Performance requirements for
application systems used to make spatially variable applications to
field crops. Specification
AGE/15 confirmed (2011) Reconfirm
BS 6356-9:1996 Spraying equipment for crop
protection -- Specification for systems for closed transfer of liquid
formulations
AGE/15 confirmed (2011) Reconfirm
BS 6356-4:1989 Spraying equipment for crop
protection -- Specification for performance limits for field
spraying nozzles
AGE/15 confirmed (2011) Reconfirm
BS 6356-7:1993 Spraying equipment for crop
protection -- Guide for typical data
sheet layout
AGE/15 confirmed (2011) Reconfirm
BS 6356-8:1996 Spraying equipment for crop
protection -- Specification for
induction hoppers
AGE/15 confirmed (2011) Reconfirm
BS 7411:1991 Specification for lever operated
knapsack sprayers
AGE/15 confirmed (2011) Reconfirm
BS 4115:1993 Specification for compression
knapsack sprayers
AGE/15 confirmed (2011) Reconfirm
BS 7562-6:1992 Planning, design and installation of irrigation schemes -- Guide for
feasibility and implementation procedures
AGE/30 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 9 of 148 January 2016
BS 7562-2:1992 Planning, design and installation of
irrigation schemes -- Guide for acquisition of site data
AGE/30 confirmed (2011) Reconfirm
BS 7562-5:1993 Planning, design and installation of
irrigation schemes -- Guide for irrigation equipment
AGE/30 confirmed (2011) Reconfirm
BS 7562-4:1992 Planning, design and installation of irrigation schemes -- Guide to
water resources
AGE/30 confirmed (2011) Reconfirm
BS 7562-1:1992 Planning, design and installation of irrigation schemes -- Glossary of
terms
AGE/30 confirmed (2011) Reconfirm
BS 4742-6:1988 Hydraulic equipment for agricultural machinery --
Specification for dimensions and location of agricultural tractor
hydraulic return to sump porting
AGE/32 confirmed (2011) Reconfirm
BS 4742-8:1990 Hydraulic equipment for
agricultural machinery -- Method for colour coding of remote
hydraulic power services and controls on agricultural tractors
AGE/32 confirmed (2011) Reconfirm
BS 4742-7:1989 Hydraulic equipment for agricultural machinery --
Specification for port connections for agricultural trailed vehicle
hydraulic brake couplings
AGE/32 confirmed (2011) Reconfirm
BS 3986-1:1998 Methods of test for drying performance of agricultural grain
dryers -- General procedures and limited requirements for wheat
AGE/32 confirmed (2011) Reconfirm
BS 3986-2:1998 Methods of test for drying performance of agricultural grain
dryers -- Additional procedures and
crop specific requirements
AGE/32 confirmed (2011) Reconfirm
BS 6142:1981 Specification for presentation of
technical data on hydraulic systems of agricultural tractors and
machinery
AGE/32 confirmed (2011) Reconfirm
BS 4639:1987 Specification for brakes and
braking systems for towed
agricultural vehicles
AGE/32 confirmed (2011) Reconfirm
BS 5401:1990 Guide to information content and
presentation of operators' manuals
provided for tractors and machinery for agriculture and
forestry
AGE/6 confirmed (2011) Reconfirm
BS 2468-1:1994 Glossary of terms and classification
relating to agricultural machinery
and implements. -- Power and tractive units
AGE/6 confirmed (2011) Reconfirm
BS 6736:1986 Code of practice for hand signalling for use in agricultural operations
AGE/6 confirmed (2011) Reconfirm
BS 7986:2005 Data quality metrics for industrial
measurement and control systems. Specification
AMT/7 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 10 of 148 January 2016
BS AU 40-4a:1966 Specification for motor vehicle
lighting and signalling equipment -- Sealed beam headlamps
AUE/1 confirmed (2011)
BS AU 156:1971 Recommendations for aiming of
headlamps and auxiliary lamps on motor vehicles
AUE/1 confirmed (2011)
BS AU 47:1965 Specification for advance warning triangle to indicate temporary
obstructions
AUE/1 confirmed (2011) Reconfirm
BS AU 152:1970 Specification for rear marking plates for vehicles
AUE/1 confirmed (2011) Reconfirm
BS AU 162a:1976 Specification for headlamp optical
aiming devices
AUE/1 confirmed (2011)
BS AU 242a:1998 Automotive windscreen repair.
Code of practice
AUE/1 confirmed (2011)
BS AU 200-2a:1984 Spray reducing devices for heavy goods vehicles -- Specification for
performance of suppression
material and devices, and air/water separating material and devices
AUE/13 confirmed (2011) Reconfirm
BS AU 190:1983 Specification for interface
dimensions and fixing bolts for the mounting of overrun devices on
delta shaped drawbars of trailers
up to 2000 kg
AUE/13 confirmed (2011)
BS AU 29:1964 Specification for drawbar eyes and
forecarriage pins for connection between trailers of 5-35 tons gross
weight and towing vehicle
AUE/13 confirmed (2011) Reconfirm
BS AU 2a:1970 Specification for dimensions of
3$9H - 4$9H in diameter fifth
wheel king pin for use with extra heavy duty semi-trailers
AUE/13 confirmed (2011) Reconfirm
BS AU 146b:1970 Specification for standard automatic roller-type coupling for
semi-trailers not exceeding 7$9D tons laden weight
AUE/13 confirmed (2011) Reconfirm
BS AU 30b:1970 Specification for standard
automatic roller-type coupling for semi-trailers of 7 tons to 14$9L
tons laden weight
AUE/13 confirmed (2011) Reconfirm
BS AU 114b:1979 Specification for strength requirements of towing brackets
and coupling balls for caravans and light trailers
AUE/13 confirmed (2011)
BS AU 210-2:1994 Drawbars for caravans and light trailers -- Specification for the
design of aluminium drawbars and
chassis
AUE/13 confirmed (2011)
BS AU 217-2:1989 Maximum road speed limiters for
motor vehicles -- Specification for
system and component requirements
AUE/13 confirmed (2011) Reconfirm
BS AU 200-1a:1984 Spray reducing devices for heavy goods vehicles -- Specification for
design of containment devices
AUE/13 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 11 of 148 January 2016
BS AU 25:1964 Specification for towing hook for
use between trailers of 5-14 tons gross weight and towing vehicle
AUE/13 confirmed (2011) Reconfirm
BS AU 27:1964 Specification for towing hook for
use between trailers of 5-35 tons gross weight and towing vehicle
AUE/13 confirmed (2011) Reconfirm
BS AU 26:1964 Specification for towing jaw for use between trailers of 5-16 tons gross
weight and towing vehicle
AUE/13 confirmed (2011) Reconfirm
BS AU 28:1964 Specification for towing jaw for use between trailers of 5-35 tons gross
weight and towing vehicle
AUE/13 confirmed (2011) Reconfirm
BS AU 217-1a:1987 Maximum road speed limiters for motor vehicles -- Specification for
installed requirements
AUE/13 confirmed (2011) Reconfirm
BS AU 3:1970 Specification for clearance dimensions and fifth wheel
positions for tractors and semi-trailers
AUE/13 confirmed (2011) Reconfirm
BS AU 181:1982 Specification for interface
dimensions for demountable vehicle body systems
AUE/13 confirmed (2011) Reconfirm
BS AU 24a:1989 Specification for towing
connections for trailers up to 5000 kg gross mass
AUE/13 confirmed (2011) Reconfirm
BS 6765-4:1987 Leisure accommodation vehicles.
Caravans -- Specification for undergear
AUE/13 confirmed (2011)
BS AU 267:1998 Code of practice for breakaway cables and secondary couplings
AUE/13 confirmed (2011)
BS AU 5:1963 Specification for dimensions of a 'contact' type coupling for vacuum
and pressure braking systems on trailers and semi-trailers
AUE/15 partially replaced by BS AU 138a:1980
Confirm
BS AU 91:1965 Specification for dimensions of electrical cable connectors for
starter battery taper terminal posts (cars and light commercial vehicles
using positive earth system)
AUE/16 confirmed (2011) Reconfirm
BS AU 198:1984 Specification for electrical
connections between towing vehicles and trailers with 24 V
electrical equipment: type 24 S (supplementary)
AUE/16 confirmed (2011)
BS AU 197:1984 Specification for electrical
connections between towing vehicles and trailers with 24 V
electrical equipment: type 24 N
(normal)
AUE/16 confirmed (2011)
BS AU 16a:1989 Specification for electrical cable
connectors (17.5 A maximum
continuous rating)
AUE/16 confirmed (2011)
BS AU 7a:1983 Specification for colour code for
road vehicle electrical cables
AUE/16 confirmed (2011) Reconfirm
BS AU 207:1986 Specification for dimensions of car
radio installation space
AUE/16 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 12 of 148 January 2016
BS AU 209-2:1988 Vehicle security -- Specification for
security systems against theft of in-car equipment for entertainment
and communication purposes
AUE/17 confirmed (2011) Reconfirm
BS AU 209-5b:1996 Vehicle security -- Specification for
central power locking systems for passenger cars and car derived
vehicles
AUE/17 confirmed (2011) Reconfirm
BS AU 209-3:1988 Vehicle security -- Specification for
security marking of glazing for
passenger cars and car derived vehicles
AUE/17 confirmed (2011) Reconfirm
BS AU 209-6a:1996 Vehicle security -- Specification for dead locking systems for passenger
cars and car derived vehicles
AUE/17 confirmed (2011) Reconfirm
BS AU 209-4a:1995 Vehicle security -- Specification for
security glazing for passenger cars
and car derived vehicles
AUE/17 confirmed (2011) Reconfirm
BS AU 175-4a:1997 Vehicle identification numbers
(VIN) -- Specification for a visible
vehicle identification number
AUE/17 confirmed (2011) Reconfirm
BS AU 209-1a:1992 Vehicle security -- Specification for
locking systems for passenger cars and car derived vehicles
AUE/17 confirmed (2011) Reconfirm
BS AU 209-7:1993 Vehicle security -- Specification for
locking systems for goods vehicle driver's compartments
AUE/17 confirmed (2011) Reconfirm
BS AU 209-8:1997 Vehicle security -- Specification for
locking systems for goods vehicle load compartments
AUE/17 confirmed (2011) Reconfirm
BS AU 209-0:1996 Vehicle security -- Guide to the
application of security devices/systems to vehicles
AUE/17 confirmed (2011) Reconfirm
BS AU 223a:2006 Design, construction performance
and marking of vehicle support stands for cars and light vans.
Specification
AUE/9 confirmed (2011) Reconfirm
BS AU 187:2000 Tow rope assemblies for towing
passenger cars and light vans
AUE/9 confirmed (2011) Reconfirm
BS 4585-18:1996 Methods of test for spices and
condiments -- Determination of total capsaicinoid content of chillies
and chilli oleoresins (high-performance liquid
chromatographic method)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-29:1997 Herbs and spices ready for food use -- Specification for dried whole
dill seed, dill leaves and ground dill
AW/-/2 confirmed (2011) Reconfirm
BS 7087-24:1996 Herbs and spices ready for food use -- Specification for dried
pimento (allspice) (whole and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 4585-2:1982 Methods of test for spices and
condiments -- Determination of moisture content (entrainment
method)
AW/-/2 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 13 of 148 January 2016
BS 7087-12:1992 Herbs and spices ready for food
use -- Specification for dried basil (bouquets, rubbed and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-18:1993 Herbs and spices ready for food
use -- Specification for dried rosemary (whole, rubbed and
ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-1:1995 Herbs and spices ready for food
use -- Specification for black and
white pepper (whole and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-9:1996 Herbs and spices ready for food
use -- Specification for dried
marjoram (whole, rubbed and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-20:1995 Herbs and spices ready for food use -- Specification for dried
parsley (cut, rubbed and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-22:1995 Herbs and spices ready for food use -- Specification for dried
mustard seeds (whole and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-23:1995 Herbs and spices ready for food use -- Specification for dried
caraway seeds (whole and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-10:1996 Herbs and spices ready for food use -- Specification for dried mint
(whole, rubbed and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-16:1993 Herbs and spices ready for food use -- Specification for oregano
(whole, rubbed and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-28:1997 Herbs and spices ready for food
use -- Specification for dried
tarragon (whole and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-6:1996 Herbs and spices ready for food
use -- Specification for coriander
seeds (whole and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-19:1994 Herbs and spices ready for food
use. -- Specification for fennel seeds (whole and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-7:1996 Herbs and spices ready for food
use -- Specification for dried fenugreek (whole or ground)
AW/-/2 confirmed (2011) Reconfirm
BS 4585-6:1992 Methods of test for spices and
condiments -- Determination of non-volatile ether extract
AW/-/2 confirmed (2011) Reconfirm
BS 4585-7:1989 Methods of test for spices and
condiments -- Determination of Scoville index of chillies
AW/-/2 confirmed (2011) Reconfirm
BS 7087-2:1995 Herbs and spices ready for food
use -- Specification for dried thyme (whole and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-27:1997 Herbs and spices ready for food use -- Specification for dried
sesame seeds (dehulled)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-3:1996 Herbs and spices ready for food use -- Specification for dried sage
(whole and ground)
AW/-/2 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 14 of 148 January 2016
BS 7087-13:1992 Herbs and spices ready for food
use -- Specification for turmeric (whole and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-14:1992 Herbs and spices ready for food
use -- Specification for dried nutmeg and dried mace
AW/-/2 confirmed (2011) Reconfirm
BS 7087-15:1993 Herbs and spices ready for food use -- Specification for cinnamon
(whole and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-17:1993 Herbs and spices ready for food use -- Specification for chillies
(whole and ground)
AW/-/2 confirmed (2011) Reconfirm
BS 7087-26:1996 Herbs and spices ready for food use -- Specification for dehydrated
garlic
AW/-/2 confirmed (2011) Reconfirm
BS 7087-25:1996 Herbs and spices ready for food use -- Specification for dehydrated
onion
AW/-/2 confirmed (2011) Reconfirm
BS 3936-9:1998 Nursery stock -- Specification for bulbs, corms and tubers
AW/1 confirmed (2011) Reconfirm
BS 3936-10:1990 Nursery stock -- Specification for
ground cover plants
AW/1 confirmed (2011) Reconfirm
BS 3936-7:1989 Nursery stock -- Specification for bedding plants
AW/1 confirmed (2011) Reconfirm
BS 3936-3:1990 Nursery stock -- Specification for fruit plants
AW/1 confirmed (2011) Reconfirm
BS 3936-2:1990 Nursery stock -- Specification for
roses
AW/1 confirmed (2011) Reconfirm
BS 998:1990 Specification for vacuum salt for food use
AW/100 confirmed (2011) Reconfirm
BS 5226:1991 Code of practice for equipment and procedures for the cleaning and
disinfecting of milking machine installations
AW/17 confirmed (2011) Reconfirm
BS 5305:1984 Code of practice for cleaning and disinfecting of plant and equipment
used in the dairying industry
AW/17 confirmed (2011) Reconfirm
BS 4285-4:1991 Microbiological examination for dairy purposes -- Methods for
assessment of hygienic conditions
AW/17 confirmed (2011) Reconfirm
BS 7771:1994 Code of practice for pasteurization of milk on farms and in small
dairies
AW/17 confirmed (2011) Reconfirm
BS 684-0.1:1995 Methods of analysis of fats and
fatty oils. General introduction --
General procedures and list of determinations in BS 684
AW/307 confirmed (2011) Reconfirm
BS 684-1.11:1976 Methods of analysis of fats and fatty oils. Physical methods --
Determination of penetration value
AW/307 confirmed (2011) Reconfirm
BS 684-1.13:1976 Methods of analysis of fats and fatty oils. Physical methods --
Determination of cooling curve
AW/307 confirmed (2011) Reconfirm
BS 684-1.5:1987 Methods of analysis of fats and
fatty oils. Physical methods --
Determination of cloud point
AW/307 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 15 of 148 January 2016
BS 5190:1985 Specification for pipeline filters,
filter bodies and filter elements for milking installations
AW/32 confirmed (2011) Reconfirm
BS 4317-20:1999 Methods of test for cereals and
pulses -- Determination of water absorption of flour and rheological
properties of doughs using a farinograph
AW/4 confirmed (2011) Reconfirm
BS 4317-19:1990 Methods of test for cereals and
pulses -- Determination of protein
quality of wheat by the sodium dodecyl sulphate (SDS) test
AW/4 confirmed (2011) Reconfirm
BS 4317-21:1999 Methods of test for cereals and pulses -- Determination of
rheological properties of doughs using an extensograph
AW/4 confirmed (2011) Reconfirm
BS 4317-18:1988 Methods of test for cereals and pulses -- Determination of hidden
insect infestation
AW/4 confirmed (2011) Reconfirm
BS 734C:1962 Measurement of the density of milk using a hydrometer -- Percentage
of total solids and non-fatty solids in milk corresponding to given fat
content and observed density fat
content range 2-6 per cent (with fat in the liquid state)
AW/5 confirmed (2011) Reconfirm
BS 3095-2:1988 Methods for determination of the freezing-point depression of milk --
Recommendations for the interpretation of the freezing-point
depression of herd milk
AW/5 confirmed (2011) Reconfirm
BS 1743-6.1:1983 Methods for analysis of dried milk
and dried milk products. Assessment of the heat class of
dried milk -- Heat number method (reference method)
AW/5 confirmed (2011) Reconfirm
BS 1743-4:1980 Methods for analysis of dried milk
and dried milk products -- Determination of the dispersibility
and the wetting time of instant dried milk
AW/5 confirmed (2011) Reconfirm
BS 1741-6.1:1990 Methods for chemical analysis of
liquid milk and cream. Determination of casein nitrogen
content of liquid milk -- Reference method
AW/5 confirmed (2011) Reconfirm
BS 1741-6.2:1990 Methods for chemical analysis of
liquid milk and cream. Determination of casein nitrogen
content of liquid milk -- Routine
method
AW/5 confirmed (2011) Reconfirm
BS 4938-2P:1982 Dirt content of milk -- Photographic
standards for the method for the
determination of visible dirt content of milk (rapid method)
AW/5 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 16 of 148 January 2016
BS 1741-5.1:1988 Methods for chemical analysis of
liquid milk and cream. Determination of the nitrogen
content of liquid milk -- Reference method
AW/5 confirmed (2011) Reconfirm
BS 1741-5.2:1990 Methods for chemical analysis of
liquid milk and cream. Determination of the nitrogen
content of liquid milk -- Routine method
AW/5 confirmed (2011) Reconfirm
BS 1743-1:1986 Methods for analysis of dried milk
and dried milk products -- General introduction, including preparation
of laboratory samples
AW/5 confirmed (2011) Reconfirm
BS 1741-10.1:1989 Methods for chemical analysis of
liquid milk and cream.
Determination of titratable acidity -- Method for liquid milk
AW/5 confirmed (2011) Reconfirm
BS 1741-10.2:1989 Methods for chemical analysis of liquid milk and cream.
Determination of titratable acidity -- Method for cream
AW/5 confirmed (2011) Reconfirm
BS 1741-1:1987 Methods for chemical analysis of liquid milk and cream -- General
introduction including preparation of samples
AW/5 confirmed (2011) Reconfirm
BS 1742-1:1990 Methods for chemical analysis of condensed milks -- General
introduction, including preparation
of test samples
AW/5 confirmed (2011) Reconfirm
BS 1741-7.1:1989 Methods for chemical analysis of
liquid milk and cream. Determination of lactose content --
Reference method
AW/5 confirmed (2011) Reconfirm
BS 1741-7.2:1989 Methods for chemical analysis of
liquid milk and cream. Determination of lactose content --
Routine method
AW/5 confirmed (2011) Reconfirm
BS 1741-8:1988 Methods for chemical analysis of liquid milk and cream --
Determination of chloride content
of liquid milk
AW/5 confirmed (2011) Reconfirm
BS 1743-19:1985 Methods for analysis of dried milk and dried milk products --
Determination of scorched particles
content
AW/5 confirmed (2011) Reconfirm
BS 1742-5.1:1991 Methods for chemical analysis of
condensed milks. Determination of
nitrogen content -- Reference method
AW/5 confirmed (2011) Reconfirm
BS 770-2:1976 Methods for chemical analysis of
cheese -- Determination of water content (reference and routine
methods)
AW/5 confirmed (2011) Reconfirm
BS 1741-11:1989 Methods for chemical analysis of
liquid milk and cream -- Detection of detergent/disinfectant residues
AW/5 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 17 of 148 January 2016
BS 1742-5.2:1991 Methods for chemical analysis of
condensed milks. Determination of nitrogen content -- Routine method
AW/5 confirmed (2011) Reconfirm
BS 734-1:1973 Measurement of the density of milk
using a hydrometer -- Specification for hydrometers for use in milk
AW/5 confirmed (2011) Reconfirm
BS 5272:1975 Method for simultaneous routine determination of the water
contents of a batch of dried milk
samples
AW/5 confirmed (2011) Reconfirm
BS 1741-9:1988 Methods for chemical analysis of
liquid milk and cream --
Determination of ash from liquid milk
AW/5 confirmed (2011) Reconfirm
BS 3095-1.2:1988 Methods for determination of the freezing-point depression of milk.
Methods -- Hortvet method
AW/5 confirmed (2011) Reconfirm
BS 770-8:1987 Methods for chemical analysis of cheese -- Determination of
nitrogen content (reference
method)
AW/5 confirmed (2011) Reconfirm
BS 1742-4:1991 Methods for chemical analysis of
condensed milks -- Determination of ash from condensed milks
AW/5 confirmed (2011) Reconfirm
BS 4938-2:1982 Dirt content of milk -- Method for
the determination of visible dirt content (rapid method)
AW/5 confirmed (2011) Reconfirm
BS 6248-1:1982 Caseins and caseinates -- General
introduction, including preparation of laboratory samples
AW/5 confirmed (2011) Reconfirm
BS 6248-6:1982 Caseins and caseinates -- Method
for determination of lactose content (photometric method)
AW/5 confirmed (2011) Reconfirm
BS 3095-3:1981 Methods for determination of the
freezing-point depression of milk -- Storage of samples
AW/5 confirmed (2011) Reconfirm
BS 4938-1:1982 Dirt content of milk -- Method for the determination of dirt content
(reference method)
AW/5 confirmed (2011)
BS 5086-4:1985 Analysis of butter -- Method for determination of salt content
(reference method)
AW/5 confirmed (2011) Reconfirm
BS 5086-3:1984 Analysis of butter -- Method for determination of water content
(routine method)
AW/5 confirmed (2011) Reconfirm
BS 5086-1:1984 Analysis of butter -- General introduction including preparation
of samples
AW/5 confirmed (2011) Reconfirm
BS 5086-7:1991 Analysis of butter -- Method for determination of pH of butter
serum
AW/5 confirmed (2011) Reconfirm
BS 770-5:1976 Methods for chemical analysis of
cheese -- Determination of pH
value
AW/5 confirmed (2011) Reconfirm
BS 734-2:1959 Measurement of the density of milk
using a hydrometer -- Methods
AW/5 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 18 of 148 January 2016
BS 770-1:1986 Methods for chemical analysis of
cheese -- General introduction
AW/5 confirmed (2011) Reconfirm
BS 1743:1968 Methods for analysis of dried milk and dried milk products
AW/5 confirmed (2011) Reconfirm
BS 4401-4:1970 Methods of test for meat and meat
products -- Determination of total
fat content
AW/6 confirmed (2011) Reconfirm
BS 4401-7:1976 Methods of test for meat and meat
products -- Determination of nitrate content
AW/6 confirmed (2011) Reconfirm
BS 4401-8:1976 Methods of test for meat and meat
products -- Determination of nitrite content
AW/6 confirmed (2011) Reconfirm
BS 4285-3.9.2:1992 Microbiological examination for
dairy purposes. Methods for detection and/or enumeration of
specific groups of microorganisms. Detection of Salmonella --
Screening method using electrical
conductance
AW/9 confirmed (2011) Reconfirm
BS 4285-3.4.2:1989 Microbiological examination for
dairy purposes. Methods for
detection and/or enumeration of specific groups of microorganisms.
Enumeration of lipolytic microorganisms -- Tributyrin agar
method
AW/9 confirmed (2011) Reconfirm
BS 4285-3.5:1988 Microbiological examination for
dairy purposes. Methods for detection and/or enumeration of
specific groups of microorganisms -
- Enumeration of proteolytic microorganisms
AW/9 confirmed (2011) Reconfirm
BS 4285-2.5:1989 Microbiological examination for
dairy purposes. Methods of general application for enumeration of
microorganisms -- Enumeration of bacteria by direct microscopic
counts
AW/9 confirmed (2011) Reconfirm
BS 4285-3.2:1991 Microbiological examination for dairy purposes. Methods for
detection and/or enumeration of specific groups of microorganisms -
- Enumeration of thermoduric
bacteria
AW/9 confirmed (2011) Reconfirm
BS 5763-5:1981 Methods for microbiological
examination of food and animal
feeding stuffs -- Enumeration of micro-organisms. Colony count at
30$0DC (surface plate technique)
AW/9 confirmed (2011) Reconfirm
BS 4285-5.3:1987 Microbiological examination for dairy purposes. Ancillary methods -
- Test for inhibitory substances
AW/9 confirmed (2011) Reconfirm
BS 1722-9:2006 Fences -- Specification for mild steel (low carbon steel) fences with
round or square verticals and flat horizontals
B/201 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 19 of 148 January 2016
BS 1722-17:2006 Fences -- Specification for electric
security fences. Design, installation and maintenance
B/201 confirmed (2011) Under
revision
BS 1722-8:2006 Fences -- Specification for mild
steel (low carbon steel) continuous bar fences and hurdles
B/201 confirmed (2011) Reconfirm
BS 1722-18:2011 Fences -- Specification for free-standing temporary steel mesh
perimeter fencing panels
B/201 current Confirm
BS 1722-10:2006 Fences -- Specification for anti-intruder fences in chain link and
welded mesh
B/201 confirmed (2011) Reconfirm
BS 1722-5:2006 Fences -- Specification for close-boarded fences and wooden
palisade fences
B/201 confirmed (2011)
BS 1722-2:2006 Fences -- Specification for strained wire and wire mesh netting fences
B/201 confirmed (2011) Reconfirm
BS 1722-11:2006 Fences -- Specification for
prefabricated wood panel fences
B/201 confirmed (2011)
BS 1722-14:2006 Fences -- Specification for open
mesh steel panel fences
B/201 confirmed (2011) Under
revision
BS 1722-7:2006 Fences -- Specification for wooden post and rail fences
B/201 confirmed (2011)
BS 1722-12:2006 Fences -- Specification for steel
palisade fences
B/201 confirmed (2011) Under
revision
BS 1722-1:2006 Fences -- Specification for chain
link fences
B/201 confirmed (2011) Reconfirm
BS 5709:2006 Gaps, gates and stiles. Specification
B/201 confirmed (2011)
BS 8103-1:2011 Structural design of low-rise
buildings -- Code of practice for stability, site investigation,
foundations, precast concrete floors and ground floor slabs for
housing
B/204 current
BS 5395-2:1984 Stairs, ladders and walkways -- Code of practice for the design of
helical and spiral stairs
B/208 confirmed (2011)
BS 4592-1:2006 Industrial type flooring and stair treads -- Metal open bar gratings.
Specification
B/208 confirmed (2011) Reconfirm
BS 5395-4:2011 Code of practice for the design of
stairs for limited access
B/208 current Confirm
BS 6180:2011 Barriers in and about buildings.
Code of practice
B/208 current Confirm
BS 4592-5:2006 Industrial type flooring and stair treads -- Solid plates in metal and
glass reinforced plastics (GRP).
Specification
B/208/1 confirmed (2011) Reconfirm
BS 4592-4:2006 Industrial type flooring and stair
treads -- Glass reinforced plastics (GRP) open bar gratings.
Specification
B/208/1 confirmed (2011) Reconfirm
BS 4592-2:2006 Industrial type flooring and stair
treads -- Expanded metal gratings. Specification
B/208/1 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 20 of 148 January 2016
BS 7370-1:1991 Grounds maintenance --
Recommendations for establishing and managing grounds
maintenance organizations and for design considerations related to
maintenance
B/213 confirmed (2011) Reconfirm
BS 7370-3:1991 Grounds maintenance -- Recommendations for maintenance
of amenity and functional turf (other than sports turf)
B/213 confirmed (2011) Reconfirm
BS 7370-2:1994 Grounds maintenance -- Recommendations for the
maintenance of hard areas
(excluding sports surfaces)
B/213 confirmed (2011) Reconfirm
BS 7370-4:1993 Grounds maintenance --
Recommendations for maintenance of soft landscape (other than
amenity turf)
B/213 confirmed (2011) Reconfirm
BS 4428:1989 Code of practice for general
landscape operations (excluding hard surfaces)
B/213 confirmed (2011) Reconfirm
BS 7370-5:1998 Grounds maintenance --
Recommendations for the maintenance of water areas
B/213 confirmed (2011) Reconfirm
PD 6682-5:2005 Aggregates -- Lightweight
aggregates for bituminous mixtures and surface treatments and for
unbound and bound applications. Guidance on the use of BS EN
13055-2
B/502/5 confirmed (2011) Reconfirm
PD 6682-4:2003 Aggregates -- Lightweight aggregates for concrete, mortar
and grout. Guidance on the use of BS EN 13055-1
B/502/5 confirmed (2011) Reconfirm
BS 812-104:1994 Testing aggregates -- Method for qualitative and quantitative
petrographic examination of
aggregates
B/502/6 confirmed (2011) Reconfirm
BS 812-103.2:1989 Testing aggregates. Method for
determination of particle size distribution -- Sedimentation test
B/502/6 confirmed (2011) Reconfirm
BS 812-123:1999 Testing aggregates -- Method for
determination of alkali-silica reactivity. Concrete prism method
B/502/6 confirmed (2011) Reconfirm
BS 812-114:1989 Testing aggregates -- Method for determination of the polished-stone
value
B/502/6 confirmed (2011) Reconfirm
BS 812-109:1990 Testing aggregates -- Methods for determination of moisture content
B/502/6 confirmed (2011) Reconfirm
PD 6682-9:2003 Aggregates -- Guidance on the use
of European test method standards
B/502/6 confirmed (2011) Reconfirm
BS 812-121:1989 Testing aggregates -- Method for
determination of soundness
B/502/6 confirmed (2011) Reconfirm
BS 5834-4:2011 Surface boxes, guards and underground chambers for the
purposes of utilities -- Specification
for utility chambers
B/504 current Confirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 21 of 148 January 2016
BS 5834-2:2011 Surface boxes, guards and
underground chambers for the purposes of utilities -- Specification
for surface boxes
B/504 current
BS 8542:2011 Calculating domestic water
consumption in non-domestic buildings. Code of practice
B/504 current Confirm
BS 1566-
1:2002+A1:2011
Copper indirect cylinders for
domestic purposes -- Open vented copper cylinders. Requirements
and test methods
B/504/-/10 current
BS 7942:2011 Thermostatic mixing valves for use
in care establishments. Requirements and test methods
B/504/-/8 current Confirm
BS 8525-2:2011 Greywater systems -- Domestic
greywater treatment equipment. Requirements and test methods
B/505/50 current
BS 6999:1989 Specification for vitreous-enamelled
low-carbon-steel flue pipes, other components and accessories for
solid-fuel-burning appliances with a rated output of 45 kW
B/506 current
BS 41:1973 Specification for cast iron spigot and socket flue or smoke pipes and
fittings
B/506 current Confirm
BS 567:1973 Specification for asbestos-cement
flue pipes and fittings, light quality
B/506 current Confirm
BS 835:1973 Specification for asbestos-cement
flue pipes and fittings, heavy quality
B/506 current
BS 7533-12:2006 Pavements constructed with clay,
natural stone or concrete pavers -- Guide to the structural design of
trafficked pavements constructed on a bound base using concrete
paving flags and natural stone
slabs
B/507 confirmed (2011) Reconfirm
BS 7533-4:2006 Pavements constructed with clay,
natural stone or concrete pavers -- Code of practice for the
construction of pavements of
precast concrete flags or natural stone slabs
B/507 confirmed (2011) Reconfirm
BS 1703:2005 Refuse chutes and hoppers.
Specification
B/508/1 confirmed (2011)
BS 792:1973 Specification for mild steel dustbins B/508/1 confirmed (2011)
BS 6779-4:1999 Highway parapets for bridges and
other structures -- Specification for parapets of reinforced and
unreinforced masonry construction
B/509/1 confirmed (2011)
BS 1924-1:1990 Stabilized materials for civil
engineering purposes -- General requirements, sampling, sample
preparation and tests on materials
before stabilization
B/510 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 22 of 148 January 2016
BS 1924-2:1990 Stabilized materials for civil
engineering purposes -- Methods of test for cement-stabilized and lime-
stabilized materials
B/510 current
BS 598-1:2011 Sampling and examination of
bituminous mixtures for roads and other paved areas -- Methods for
the measurement of the rate of
spread of coated chippings and the temperature of bituminous
mixtures using non-contact temperature-measuring devices
and for the assessment of the compaction performance of a roller
B/510/1 current
BS 434-1:2011 Bitumen road emulsions --
Specification for anionic bitumen road emulsions
B/510/19 current
BS 3247:2011 Specification for salt for spreading
on highways for winter maintenance
B/510/21 current Confirm
BS 7941-1:1999 Methods for measuring the skid
resistance of pavement surfaces -- Side-way force coefficient routine
investigation machine
B/510/5 replaced by BS 7941-
1:2006
BS 6770:1988 Guide for exterior colours for park
homes (mobile homes), holiday caravans and transportable
accommodation units
B/511 confirmed (2011)
BS 6767-1:1999 Transportable accommodation
units -- Recommendations for
design and construction of the basic unit
B/511/1 confirmed (2011) Reconfirm
BS 6164:2011 Code of practice for health and
safety in tunnelling in the construction industry
B/513 current Confirm
BS 6187:2011 Code of practice for full and partial demolition
B/513 current Confirm
BS 4550-3.4:1978 Methods of testing cement. Physical tests -- Strength tests
B/516/12 replaced by BS EN 196-1:1995 as it is
quoted in other standards. Partially
replaced by BS 1881-131:1998
Confirm
BS 1881-119:2011 Testing concrete -- Method for
determination of compressive strength using portions of beams
broken in flexure (equivalent cube
method)
B/517 current
BS 8000-2.1:1990 Workmanship on building sites. Code of practice for concrete work
-- Mixing and transporting concrete
B/517 partially replaced by BS 8000-0:2014
BS 1881-113:2011 Testing concrete -- Method for making and curing no-fines test
cubes
B/517 current
BS 1881-129:2011 Testing concrete -- Method for
determination of density of partially
compacted semi-dry fresh concrete
B/517/1 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 23 of 148 January 2016
BS 1881-122:2011 Testing concrete -- Method for
determination of water absorption
B/517/1 current Confirm
BS 8443:2005 Specification for establishing the suitability of special purpose
concrete admixtures
B/517/3 confirmed (2011) Reconfirm
BS 6319-3:1990 Testing of resin and polymer/cement compositions for
use in construction -- Methods for measurement of modulus of
elasticity in flexure and flexural
strength
B/517/8 confirmed (2011) Reconfirm
BS 6319-6:1984 Testing of resin and
polymer/cement compositions for use in construction -- Method for
determination of modulus of
elasticity in compression
B/517/8 confirmed (2011) Reconfirm
BS 6319-2:1983 Testing of resin and
polymer/cement compositions for
use in construction -- Method for measurement of compressive
strength
B/517/8 confirmed (2011) Reconfirm
BS 1990-1:1984 Wood poles for overhead power
and telecommunication lines --
Specification for softwood poles
B/518 confirmed (2011) Reconfirm
BS
4978:2007+A1:2011
Visual strength grading of
softwood. Specification
B/518 current
BS
5756:2007+A1:2011
Visual strength grading of
hardwood. Specification
B/518 current Confirm
BS 6206:1981 Specification for impact performance requirements for flat
safety glass and safety plastics for
use in buildings
B/520 partially replaced by BS EN 12600:2002
Confirm
BS 6262:1982 Code of practice for glazing for
buildings
B/520/4 partially replaced by
Parts 1-4 and 6-7 of BS 6262. It will be
withdrawn on
publication of BS 6262-5
BS 4485-4:1996 Water cooling towers -- Code of
practice for structural design and construction
B/525 confirmed (2011) Reconfirm
BS 4485-3:1988 Water cooling towers -- Code of practice for thermal and functional
design
B/525 confirmed (2011) Reconfirm
BS 4485-2:1988 Water cooling towers -- Methods for performance testing
B/525 confirmed (2011) Reconfirm
PD 6688-1-1:2011 Recommendations for the design of
structures to BS EN 1991-1-1
B/525/1 current Confirm
PD 6688-2:2011 Background to the National Annex
to BS EN 1991-2 -- Traffic loads on bridges
B/525/10 current Confirm
CP 118:1969 The structural use of aluminium B/525/9 replaced by BS 8118-
1:1991 and BS 8118-2:1991
Confirm
PD 6694-1:2011 Recommendations for the design of
structures subject to traffic loading to BS EN 1997-1:2004
B/526 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 24 of 148 January 2016
BS 22475-3:2011 Geotechnical investigation and
testing. Sampling methods and groundwater measurements --
Conformity assessment of enterprises and personnel by third
party
B/526/3 current
BS 22475-2:2011 Geotechnical investigation and testing. Sampling methods and
groundwater measurements -- Qualification criteria for enterprises
and personnel
B/526/3 current
BS 1377-2:1990 Methods of test for soils for civil engineering purposes --
Classification tests
B/526/3 partially replaced by BS EN ISO 17892-
2:2014
Confirm
BS 8006-2:2011 Code of practice for strengthened/reinforced soils --
Soil nail design
B/526/4 current
BS 459:1988 Specification for matchboarded wooden door leaves for external
use
B/538/1 confirmed (2011) Reconfirm
BS 8000-11:2011 Workmanship on building sites -- Internal and external wall and floor
tiling. Ceramic and agglomerated stone tiles, natural stone and
terrazzo tiles and slabs, and
mosaics. Code of practice
B/539 partially replaced by BS 8000-0:2014
Confirm
BS 2972:1989 Methods of test for inorganic
thermal insulating materials
B/540 partially replaced by
BS EN 13467 to BS EN 13472:2001
Confirm
BS 5250:2011 Code of practice for control of
condensation in buildings
B/540/2 current
BS 8201:2011 Code of practice for installation of flooring of wood and wood-based
panels
B/543 current
BS 8481:2006 Design, preparation and application of internal gypsum, cement,
cement and lime plastering
systems. Specification
B/544 confirmed (2011)
BS 8298:1994 Code of practice for design and
installation of natural stone cladding and lining
B/545 replaced by BS 8298
Parts 1 to 4
BS 6925:1988 Specification for mastic asphalt for
building and civil engineering (limestone aggregate)
B/546 confirmed (2011) Reconfirm
BS 5284:1993 Methods of sampling and testing
mastic asphalt used in building and civil engineering
B/546 confirmed (2011) Reconfirm
CP 102:1973 Code of practice for protection of
buildings against water from the ground
B/546 partially replaced by
BS 8102:1990 and BS 8215:1991
Confirm
BS 2832:1957 Specification for hot applied damp
resisting coatings for solums
B/546 confirmed (2011) Reconfirm
BS 743:1970 Specification for materials for damp-proof courses
B/546 partially replaced by BS 6398:1983, BS
6515:1984 and BS 8215:1991
Confirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 25 of 148 January 2016
BS 8218:1998 Code of practice for mastic asphalt
roofing
B/546 confirmed (2011) Reconfirm
BS 8449:2005 Building and construction sealants with movement accommodation
factors greater than 25%. Method of test for determination of
adhesion/cohesion properties at
variable temperatures
B/547 confirmed (2011) Reconfirm
BS 3712-2:1973 Building and construction sealants -
- Methods of test for seepage,
staining, shrinkage, shelf life and paintability
B/547 confirmed (2011) Reconfirm
BS 3712-3:1974 Building and construction sealants -- Methods of test for application
life, skinning properties and tack-
free time
B/547 confirmed (2011) Reconfirm
BS 3712-1:1991 Building and construction sealants -
- Methods of test for homogeneity,
relative density and penetration
B/547 confirmed (2011) Reconfirm
BS 3712-4:1991 Building and construction sealants -
- Method of test for adhesion in peel
B/547 confirmed (2011) Reconfirm
BS 5502-40:2005 Buildings and structures for
agriculture -- Code of practice for design and construction of cattle
buildings
B/549 confirmed (2011) Reconfirm
BS 5502-
31:1995+A1:2011
Buildings and structures for
agriculture -- Guide to the storage
and handling of waste
B/549 confirmed (2011) Reconfirm
BS 5502-11:2005 Buildings and structures for
agriculture -- Guide to regulations and sources of information
B/549 confirmed (2011) Reconfirm
PD 6446:1970 Recommendations for the co-
ordination of dimensions in building. Combinations of sizes
B/554 confirmed (2011) Reconfirm
BS 6750:1986 Specification for modular
coordination in building
B/554 confirmed (2011) Reconfirm
BS 5606:1990 Guide to accuracy in building B/554 confirmed (2011)
BS 8541-2:2011 Library objects for architecture,
engineering and construction -- Recommended 2D symbols of
building elements for use in
building information modelling
B/555 current Confirm
BS 8220-3:2004 Guide for security of buildings against crime -- Storage, industrial
and distribution premises
B/562 confirmed (2011)
BS 8220-1:2000 Guide for security of buildings against crime -- Dwellings
B/562 confirmed (2011)
BS 2853:2011 Specification for the testing of steel
overhead runway beams for hoist blocks
CB/203 current Confirm
BS 8204-
3:2004+A2:2011
Screeds, bases and in situ floorings
-- Polymer modified cementitious levelling screeds and wearing
screeds. Code of practice
CB/300 current Confirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 26 of 148 January 2016
BS 8204-
5:2004+A1:2011
Screeds, bases and in situ floorings
-- Mastic asphalt underlays and wearing surfaces. Code of practice
CB/300 current Confirm
BS 8204-
4:2004+A1:2011
Screeds, bases and in situ floorings
-- Cementitious terrazzo wearing surfaces. Code of practice
CB/300 current Confirm
BS 8204-2:2003+A2:2011
Screeds, bases and in situ floorings -- Concrete wearing surfaces. Code
of practice
CB/300 current Confirm
BS 8204-7:2003 Screeds, bases and in-situ floorings -- Pumpable self-smoothing
screeds. Code of practice
CB/300 confirmed (2011) Reconfirm
BS 8534:2011 Construction procurement policies, strategies and procedures. Code of
practice
CB/500 current Confirm
BS 8533:2011 Assessing and managing flood risk in development. Code of practice
CB/501 current
BS 6349-7:1991 Maritime structures -- Guide to the
design and construction of breakwaters
CB/502 confirmed (2011)
BS 6349-5:1991 Maritime structures -- Code of
practice for dredging and land reclamation
CB/502 confirmed (2011)
BS 5726:2005 Microbiological safety cabinets.
Information to be supplied by the purchaser to the vendor and to the
installer, and siting and use of cabinets. Recommendations and
guidance
CH/100 confirmed (2011) Reconfirm
BS 2588-2:1992 Portable sanitary pans for use in healthcare establishments --
Specification for reusable pans for
commode chairs
CH/100 confirmed (2011) Reconfirm
BS 3221-6:1987 Medicine measures -- Specification
for free-standing plastics medicine measuring spoons of 5 mL capacity
CH/100 confirmed (2011) Reconfirm
BS 2588-1:1992 Portable sanitary pans for use in healthcare establishments. --
Specification for reusable bed pans
CH/100 confirmed (2011) Reconfirm
BS 3221-7:1995 Medicine measures -- Specification for oral syringes delivering doses
up to and including 5 ml
CH/100 confirmed (2011) Reconfirm
BS 1823:1973 Specification for stainless steel hollow-ware for use in hospital
operating-theatres and wards
CH/100 confirmed (2011) Reconfirm
BS 3221-1:1985 Medicine measures -- Specification for medicine measures of 50 ml
total graduated capacity
CH/100 confirmed (2011) Reconfirm
BS 5452:1977 Specification for hospital hollow-ware made of plastics material
CH/100 confirmed (2011) Reconfirm
BS 7088:1989 Specification for pneumatic
tourniquet equipment
CH/100 confirmed (2011) Reconfirm
BS 3215:1995 Specification for reusable portable urinals
CH/100 confirmed (2011) Reconfirm
BS 5402:1976 Specification for patient trolleys CH/100 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 27 of 148 January 2016
BS 8447:2005 Anaesthetic and respiratory
equipment. Hook-on fittings for the attachment of vaporizers to an
anaesthetic gas delivery device
CH/121/1 confirmed (2011) Reconfirm
BS 8532:2011 Terminal units for high flow
anaesthetic gas scavenging systems. Specification for probes
and type-specific connection points
CH/121/6 current Confirm
BS 7254-5:1990 Orthopaedic implants --
Specification for production of
castings made of cobalt-chromium-molybdenum alloy
CH/150/1 confirmed (2011) Reconfirm
BS 7251-1:1990 Orthopaedic joint prostheses -- Specification for general
requirements
CH/150/4 confirmed (2011) Reconfirm
BS 7254-2:1990 Orthopaedic implants -- Specification for general
requirements for materials and
finish
CH/150/5 confirmed (2011) Reconfirm
BS 8432:2005 Spinal orthoses. Guide to design CH/168 confirmed (2011) Reconfirm
BS 5194-2:1989 Surgical instruments -- Specification for instruments with
pivot joints (excluding cutting instruments)
CH/170 confirmed (2011) Reconfirm
BS 5194-4:1985 Surgical instruments --
Specification for scissors, shears and other jointed cutting
instruments
CH/170 confirmed (2011) Reconfirm
BS 2982:1992 Specification for materials and packaging of surgical scalpels with
detachable blades
CH/170 confirmed (2011) Reconfirm
BS 5194-3:1985 Surgical instruments -- Specification for dissecting forceps
CH/170 confirmed (2011) Reconfirm
BS 4274-1:2003 Visual acuity test types -- Test
charts for clinical determination of
distance visual acuity. Specification
CH/172/6 confirmed (2011) Reconfirm
BS 3970-2:1991 Sterilizing and disinfecting
equipment for medical products -- Specification for steam sterilizers
for aqueous fluids in sealed rigid
containers
CH/198 confirmed (2011) Reconfirm
BS 3970-5:1990 Sterilizing and disinfecting
equipment for medical products --
Specification for low temperature steam disinfectors
CH/198 confirmed (2011)
BS 2646-1:1993 Autoclaves for sterilization in laboratories -- Specification for
design, construction, safety and performance
CH/198 confirmed (2011) Reconfirm
BS 2646-5:1993 Autoclaves for sterilization in laboratories -- Methods of test for
function and performance
CH/198 confirmed (2011) Reconfirm
BS 2646-2:1990 Autoclaves for sterilization in laboratories -- Guide to planning
and installation
CH/198 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 28 of 148 January 2016
BS 2646-3:1993 Autoclaves for sterilization in
laboratories -- Guide to safe use and operation
CH/198 confirmed (2011) Reconfirm
BS 2646-4:1991 Autoclaves for sterilization in
laboratories -- Guide to maintenance
CH/198 confirmed (2011) Reconfirm
BS 8599-1:2011 Workplace first aid kits -- Specification for the contents of
workplace first aid kits
CH/240 current
BS 5724-3.26:1990 Medical electrical equipment. Particular requirements for
performance -- Method for
declaring parameters for ultrasonic diagnostic equipment using test
objects
CH/62/2 confirmed (2011) Reconfirm
BS 6196:1989 Specification for sterile epidural
catheters and introducer needles
for single use
CH/84 confirmed (2011) Reconfirm
BS 6043-2.12:1994 Methods of sampling and test for
carbonaceous materials used in
aluminium manufacture. Electrode coke. -- Determination of particle
size distribution of fine coke
CII/24 confirmed (2011) Reconfirm
BS 6043-1.7:1988 Methods of sampling and test for carbonaceous materials used in
aluminium manufacture. Electrode
pitch -- Determination of apparent density (buoyancy method)
CII/24 confirmed (2011) Reconfirm
BS 6043-1.12:1994 Method of sampling and test for
carbonaceous materials used in aluminium manufacture. Electrode
pitch. -- Determination of
mesophase content
CII/24 confirmed (2011) Reconfirm
BS 5072-1:1974 Methods of test for sodium fluoride for industrial use -- Determination
of water-insoluble matter
CII/24 confirmed (2011) Reconfirm
BS 4993-1:1974 Methods of test for aluminium fluoride for industrial use --
Determination of fluorine content
CII/24 confirmed (2011) Reconfirm
BS 4993-3:1974 Methods of test for aluminium
fluoride for industrial use --
Determination of silica content
CII/24 confirmed (2011) Reconfirm
BS 5072-2:1974 Methods of test for sodium fluoride
for industrial use -- Determination
of moisture content
CII/24 confirmed (2011) Reconfirm
BS 5072-3:1975 Methods of test for sodium fluoride
for industrial use -- Determination of fluorine content
CII/24 confirmed (2011) Reconfirm
BS 4993-2:1974 Methods of test for aluminium
fluoride for industrial use -- Determination of iron content
CII/24 confirmed (2011) Reconfirm
BS 4140-0:1986 Methods of test for aluminium
oxide -- General introduction
CII/24 confirmed (2011) Reconfirm
BS 5050:1974 Methods of test for cryolite CII/24 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 29 of 148 January 2016
BS 5688-0:1986 Methods of test for orthoboric acid
(boric acid), diboron trioxide (boric oxide), disodium tetraborates,
sodium perborates and crude sodium borates for industrial use --
General introduction
CII/26 confirmed (2011) Reconfirm
BS 6392-3:1983 Testing of ethanol for industrial use -- Method for determination of
carbonyl compounds content present in moderate amounts
(titrimetric method)
CII/26 confirmed (2011) Reconfirm
BS 6092-11:1981 Methods of sampling and test for
sodium and potassium silicates for industrial use -- Determination of
chloride content of sodium metasilicate
CII/26 confirmed (2011) Reconfirm
BS 6392-7:1983 Testing of ethanol for industrial use -- Method for determination of
methanol content [0.10% (V/V) to 1.50% (V/V)] (visual colorimetric
method)
CII/26 confirmed (2011) Reconfirm
BS 6092-12:1981 Methods of sampling and test for sodium and potassium silicates for
industrial use -- Limit test for sulphate content of sodium
metasilicate
CII/26 confirmed (2011) Reconfirm
BS 6392-2:1983 Testing of ethanol for industrial use
-- Method for determination of carbonyl compounds content
present in small amounts (photometric method)
CII/26 confirmed (2011) Reconfirm
BS 6392-6:1983 Testing of ethanol for industrial use
-- Method for determination of methanol content [0.01% (V/V) to
0.20% (V/V)] (photometric method)
CII/26 confirmed (2011) Reconfirm
BS 7319-12:1990 Analysis of sodium chloride for
industrial use -- Methods for determination of anti-caking
additives content of salt for food
use
CII/26 confirmed (2011) Reconfirm
BS 6092-10:1981 Methods of sampling and test for
sodium and potassium silicates for
industrial use -- Determination of matter insoluble in water
CII/26 confirmed (2011) Reconfirm
BS 6392-1:1983 Testing of ethanol for industrial use -- Method for detection of alkalinity
or determination of acidity to phenolphthalein
CII/26 confirmed (2011) Reconfirm
BS 6075-14:1981 Methods of sampling and test for sodium hydroxide for industrial use
-- Determination of matter insoluble in water
CII/26 confirmed (2011) Reconfirm
BS 6092-0:1981 Methods of sampling and test for sodium and potassium silicates for
industrial use -- General
introduction
CII/26 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 30 of 148 January 2016
BS 6075-12:1981 Methods of sampling and test for
sodium hydroxide for industrial use -- Determination of copper content
CII/26 confirmed (2011) Reconfirm
BS 1595-1:1986 Propan-2-ol (isopropyl alcohol) for
industrial use -- Specification for propan-2-ol (isopropyl alcohol)
CII/26 confirmed (2011) Reconfirm
BS 6070-7:1981 Methods of sampling and test for sodium carbonate for industrial use
-- Determination of copper content
CII/26 confirmed (2011) Reconfirm
BS 6070-0:1981 Methods of sampling and test for sodium carbonate for industrial use
-- General introduction
CII/26 confirmed (2011) Reconfirm
BS 6075-0:1981 Methods of sampling and test for sodium hydroxide for industrial use
-- General introduction
CII/26 confirmed (2011) Reconfirm
BS 6392-4:1983 Testing of ethanol for industrial use -- Method for determination of
aldehydes content
CII/26 confirmed (2011) Reconfirm
BS 6392-9:1983 Testing of ethanol for industrial use -- Method for determination of
permanganate time
CII/26 confirmed (2011) Reconfirm
BS 6392-8:1983 Testing of ethanol for industrial use
-- Method for determination of
esters content
CII/26 confirmed (2011) Reconfirm
BS 6392-5:1983 Testing of ethanol for industrial use
-- Method of test for miscibility with
water
CII/26 confirmed (2011) Reconfirm
BS 1941:1993 Specification for 4-methylpentan-2-
one (isobutyl methyl ketone) for industrial use
CII/26 confirmed (2011) Reconfirm
BS 1595-2:1984 Propan-2-ol (isopropyl alcohol) for
industrial use -- Methods of test
CII/26 confirmed (2011) Reconfirm
BS 1940:1987 Specification for butanone (ethyl methyl ketone) for industrial use
CII/26 confirmed (2011) Reconfirm
BS 2713:1966 Specification for 2-ethoxyethanol (ethylene glycol monoethyl ether)
CII/26 confirmed (2011) Reconfirm
BS 662-3:1979 Carbon disulphide for industrial use
-- Additional methods of test
CII/26 confirmed (2011) Reconfirm
BS 576-2:1988 Acetic acid for industrial use -- Methods of test for acetic acid
CII/26 confirmed (2011) Reconfirm
BS 6376-3:1989 Reagents for chemical analysis -- Specifications (second series)
CII/26 confirmed (2011) Reconfirm
BS 576-1:1988 Acetic acid for industrial use. --
Specification for acetic acid
CII/26 confirmed (2011) Reconfirm
BS 6392-0:1983 Testing of ethanol for industrial use -- General introduction
CII/26 confirmed (2011) Reconfirm
BS 508-1:1986 Butan-1-ol for industrial use -- Specification for butan-1-ol
CII/26 confirmed (2011) Reconfirm
BS 3993:1966 Specification for hydrochloric acid,
commercial types 1 and 2
CII/26 confirmed (2011) Reconfirm
BS 506-1:1987 Methanol for industrial use. -- Specification for methanol
CII/26 confirmed (2011) Reconfirm
BS 509-1:1987 Acetone for industrial use -- Specification for acetone
CII/26 confirmed (2011) Reconfirm
BS 5962:1980 Specifications for naphthalene
(including test methods)
CII/26 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 31 of 148 January 2016
BS 662-1:1979 Carbon disulphide for industrial
use. -- Specification
CII/26 confirmed (2011) Reconfirm
BS 1835:1991 Specification for 2-ethylhexan-1-ol for industrial use
CII/26 confirmed (2011) Reconfirm
BS 1994:1993 Specification for dichloromethane
(methylene chloride)
CII/26 confirmed (2011) Reconfirm
BS 4583:1991 Methods of test for higher alcohols
for industrial use
CII/26 confirmed (2011) Reconfirm
BS 3674:1981 Specification for sodium carbonate (technical grades)
CII/26 confirmed (2011) Reconfirm
BS 4130:1984 Specification for sodium hydroxide
(technical grades)
CII/26 confirmed (2011) Reconfirm
BS 4105:1990 Specification for liquid carbon
dioxide, industrial
CII/26 confirmed (2011) Reconfirm
BS 4774:1972 Methods of test for chloroform for industrial use
CII/26 confirmed (2011) Reconfirm
BS 508-2:1984 Butan-1-ol for industrial use --
Methods of test
CII/26 confirmed (2011) Reconfirm
BS 551:1990 Specification for butyl acetate for
industrial use
CII/26 confirmed (2011) Reconfirm
BS 553:1990 Specification for ethyl acetate for industrial use
CII/26 confirmed (2011) Reconfirm
BS 3591:1985 Specification for industrial
methylated spirits
CII/26 confirmed (2011) Reconfirm
BS 506-2:1984 Methanol for industrial use --
Methods of test
CII/26 confirmed (2011) Reconfirm
BS 4341:Addendum No. 1:1971
Methods of test for formic acid CII/26 confirmed (2011)
BS 509-2:1984 Acetone for industrial use --
Methods of test
CII/26 confirmed (2011) Reconfirm
BS 507:1985 Specification for ethanol for
industrial use
CII/26 confirmed (2011) Reconfirm
BS 579:1957 Specification for diethyl ether (technical)
CII/26 confirmed (2011) Reconfirm
BS 5634:1978 Methods of test for potassium
hydroxide
CII/26 confirmed (2011) Reconfirm
BS 4835:1973 Methods of test for plasticizer
esters
CII/26 confirmed (2011) Reconfirm
BS 4366:1993 Specification for industrial nitrogen CII/26 confirmed (2011) Reconfirm
BS 1834:1968 Specification for isopropyl acetate CII/26 confirmed (2011) Reconfirm
BS 4364:1993 Specification for industrial oxygen CII/26 confirmed (2011) Reconfirm
BS 2068:1970 Specification for acetic anhydride CII/26 confirmed (2011) Reconfirm
BS 3984:1982 Specification for sodium silicates CII/26 confirmed (2011) Reconfirm
BS 549:1970 Specification for diacetone alcohol CII/26 confirmed (2011) Reconfirm
BS 3947:1976 Specification for liquid chlorine CII/26 confirmed (2011) Reconfirm
BS 4341:1968 Methods of test for formic acid CII/26 confirmed (2011) Reconfirm
BS 552:1970 Specification for amyl acetate CII/26 confirmed (2011) Reconfirm
BS 4427-14:1989 Methods of test for sodium
tripolyphosphate (pentasodium triphosphate) and sodium
pyrophosphate (tetrasodium pyrophosphate) for industrial use --
Condensed phosphates for
industrial use (including foodstuffs): determination of
chloride content
CII/34 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 32 of 148 January 2016
BS 4427-3:1989 Methods of test for sodium
tripolyphosphate (pentasodium triphosphate) and sodium
pyrophosphate (tetrasodium pyrophosphate) for industrial use --
Condensed phosphates for
industrial use (including foodstuffs): determination of iron
content
CII/34 confirmed (2011) Reconfirm
BS 4427-11:1983 Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate (tetrasodium
pyrophosphate) for industrial use -- Separation by column
chromatography and determination
of the different phosphate forms
CII/34 confirmed (2011) Reconfirm
BS 4427-1:1969 Methods of test for sodium tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate (tetrasodium
pyrophosphate) for industrial use --
Determination of matter insoluble in water in sodium
tripolyphosphate
CII/34 confirmed (2011) Reconfirm
BS 4427-6:1974 Methods of test for sodium tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate (tetrasodium
pyrophosphate) for industrial use -- Estimation of pyrophosphate
content of sodium pyrophosphate
CII/34 confirmed (2011) Reconfirm
BS 4427-5:1974 Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate (tetrasodium
pyrophosphate) for industrial use -- Determination of particle size
distribution
CII/34 confirmed (2011) Reconfirm
BS 4427-4:1969 Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate (tetrasodium
pyrophosphate) for industrial use -- Determination of loss on ignition
CII/34 confirmed (2011) Reconfirm
BS 6829-2.1:1988 Analysis of surface active agents
(raw materials). Alkane sulphonates -- Method for
determination of total alkaline sulphonates content
CII/34 confirmed (2011) Reconfirm
BS 3762-3.10:1989 Analysis of formulated detergents -
- Methods for determination of short-chain
alkylbenzenesulphonates content
CII/34 confirmed (2011) Reconfirm
BS 3762-3.24:1988 Analysis of formulated detergents -
- Method for determination of low molecular mass alcohols content
CII/34 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 33 of 148 January 2016
BS 1715-2.4:1989 Analysis of soaps. Quantitative test
methods -- Method for determination of free fatty acids
content
CII/34 confirmed (2011) Reconfirm
BS 3762-3.25:1989 Analysis of formulated detergents -- Methods for determination of
water and volatile matter content
CII/34 confirmed (2011) Reconfirm
BS 3762-4.1:1989 Analysis of formulated detergents -
- Method for determination of clear
point of liquid detergents
CII/34 confirmed (2011) Reconfirm
BS 3762-3.15:1985 Analysis of formulated detergents -
- Method for estimation of
carboxymethylcellulose content
CII/34 confirmed (2011) Reconfirm
BS 3762-3.11:1989 Analysis of formulated detergents -
- Method for determination of free formaldehyde content
CII/34 confirmed (2011) Reconfirm
BS 1715-2.9:1990 Analysis of soaps. Quantitative test
methods. -- Method for determination of EDTA content
CII/34 confirmed (2011) Reconfirm
BS 3762-3.14:1985 Analysis of formulated detergents -
- Method for determination of carbonate content
CII/34 confirmed (2011) Reconfirm
BS 3762-3.16:1985 Analysis of formulated detergents -
- Method for determination of chloride content
CII/34 confirmed (2011) Reconfirm
BS 3762-3.12:1985 Analysis of formulated detergents -
- Method for determination of ammonia content
CII/34 confirmed (2011) Reconfirm
BS 3762-2:1989 Analysis of formulated detergents -- Qualitative test methods
CII/34 confirmed (2011) Reconfirm
BS 1545:1990 Specification for liquid toilet soap CII/34 confirmed (2011) Reconfirm
BS 1912:1990 Specification for soap flakes CII/34 confirmed (2011) Reconfirm
BS 1914:1990 Specification for toilet soap CII/34 confirmed (2011) Reconfirm
BS 4405:1990 Specification for liquid soap CII/34 confirmed (2011) Reconfirm
BS 1911:1990 Specification for hard soap CII/34 confirmed (2011) Reconfirm
BS 1913:1990 Specification for soft soap CII/34 confirmed (2011) Reconfirm
BS 7959-2:2000 Materials used for the control of
liquid spillages -- Determination of water repellency or buoyancy for
hydrophobic (oil sorbent) materials
CII/63 confirmed (2011) Reconfirm
BS 7843-2:2012 Acquisition and management of
meteorological precipitation data from a raingauge network -- Code
of practice for operating
raingauges and managing precipitation data
CPI/113 current Confirm
BS 7843-1:2012 Acquisition and management of meteorological precipitation data
from a raingauge network -- Guide
for the design, development and review of a raingauge network
CPI/113 current Confirm
BS 1339-3:2004 Humidity -- Guide to the
measurement of humidity
CPI/29 confirmed (2011)
BS 8452:2010 Use of clamp-on (externally
mounted) ultrasonic flow-metering techniques for fluid applications.
Guide
CPI/30/5 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 34 of 148 January 2016
BS 1853-2:1995 Tubular fluorescent lamps for
general lighting service -- Specification for lamps used in the
United Kingdom not included in BS EN 60081, BS EN 60901, BS EN
61195 and BS EN 61199
CPL/34/1 confirmed (2011) Reconfirm
BS 1376:1974 Specification for colours of light signals
CPL/34/7 confirmed (2011)
BS 5415-
2.2:Supplement No.
1:1986
Safety of electrical motor-operated
industrial and commercial cleaning
appliances. Particular requirements -- Specification for type H industrial
vacuum cleaners for dusts hazardous to health
CPL/61/10 confirmed (2011) Reconfirm
BS 4995:1973 Recommendations for
measurement of the veiling glare index of lenses and optical systems
CPW/172 confirmed (2011) Reconfirm
BS 4793:1972 Recommendations for specifying
the optical performance of lenses for television cameras
CPW/172 confirmed (2011) Reconfirm
BS 4779:1971 Recommendations for measurement of the optical
transfer function of optical devices
CPW/172 confirmed (2011) Reconfirm
BS 5109:1974 Glossary of terms used in assessing the performance of optical devices
and systems
CPW/172 confirmed (2011) Reconfirm
BS 4301:1991 Recommendations for preparation of drawings for optical elements
and systems
CPW/172 confirmed (2011) Reconfirm
BS 5550-5.4.1:1986 Cinematography. Common to more than one gauge. Sound -- Code of
Practice for the identification of systems for synchronization of
unperforated audio tape with
motion-picture film and videotape
CPW/36 confirmed (2011) Reconfirm
BS 5550-6.4:1980 Cinematography. Television usage
-- Recommendations for the density range, contrast and colour
balance of films and slides for
colour television
CPW/36 confirmed (2011) Reconfirm
BS 5550-7.5.4:1981 Cinematography. Production and
presentation. Film and television
location lighting -- Specification for single pole high current plugs and
socket connectors
CPW/4 current
BS 3944-1:1992 Colour and diffusion filter material for theatre, television and similar
entertainment purposes. --
Specification for flammability and dimensional stability
CPW/4 confirmed (2011) Reconfirm
BS 7909:2011 Code of practice for temporary
electrical systems for entertainment and related
purposes
CPW/4 current
BS 5577:1999 Specification for table cutlery with non-metallic handles
CW/17 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 35 of 148 January 2016
BS
6748:1986+A1:2011
Specification for limits of metal
release from ceramic ware, glassware, glass ceramic ware and
vitreous enamel ware
CW/29 current Confirm
BS 4034:1990 Specification for vitrified hotelware CW/29 confirmed (2011) Reconfirm
BS 5416:1990 Specification for china tableware CW/29 confirmed (2011) Reconfirm
BS 3788:1984 Specification for tin coated finish
on culinary utensils
CW/9 confirmed (2011) Reconfirm
BS 7000-6:2005 Design management systems -- Managing inclusive design. Guide
DES/1 confirmed (2011) Reconfirm
BS 5760-8:1998 Reliability of systems, equipment
and components -- Guide to
assessment of reliability of systems containing software
DS/1 confirmed (2011)
PD 6663:2000 Guidelines to BS EN 12973. Value management. Practical guidance to
its use and intent
DS/1 confirmed (2011) Reconfirm
BS 2045:1965 Preferred numbers E/- confirmed (2011) Withdraw
BS 2742M:1960 Miniature smoke chart EH/2/1 confirmed (2011)
BS 2742C:1957 Ringelmann chart EH/2/1 confirmed (2011) Reconfirm
BS 6068-2.18:1986 Water quality. Physical, chemical and biochemical methods --
Methods for the determination of easily liberatable cyanide
EH/3/2 confirmed (2011) Reconfirm
BS 6068-2.34:1988 Water quality. Physical, chemical and biochemical methods --
Method for the determination of
the chemical oxygen demand
EH/3/2 confirmed (2011) Reconfirm
BS 6068-2.17:1986 Water quality. Physical, chemical
and biochemical methods -- Methods for determination of total
cyanide
EH/3/2 confirmed (2011) Reconfirm
BS 667:2005 Illuminance meters. Requirements and test methods
EL/1 confirmed (2011) Reconfirm
BS 7920:2005 Luminance meters. Requirements
and test methods
EL/1 confirmed (2011) Reconfirm
BS 8456:2005 Code of practice for design and installation of directional sounder
evacuation systems
EL/1/1 confirmed (2011) Withdraw
BS 7827:2011 Code of practice for designing, specifying, maintaining and
operating emergency sound
systems at sports venues
EPL/100 current Confirm
BS 6513-5:1987 Wideband cabled distribution
systems -- Recommendations for one-way and interactive data
services
EPL/100 confirmed (2011) Reconfirm
BS 7594:2011 Code of practice for audio-
frequency induction-loop systems
(AFILS)
EPL/100 current
BS 6513-2:1984 Wideband cabled distribution
systems -- Methods of
measurement
EPL/100 confirmed (2011) Reconfirm
BS 6513-1:1984 Wideband cabled distribution
systems -- Glossary of terms
EPL/100 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 36 of 148 January 2016
PD 60065:2001 Interpretation sheets for BS EN
60065:1998. Audio, video and similar electronic apparatus. Safety
requirements
EPL/108 replaced by BS EN
60065:2002+A12:2011
Confirm
BS 7580-2:1997 Specification for the verification of
sound level meters -- Shortened procedure for type 2 sound level
meters
EPL/29 confirmed (2011) Reconfirm
BS 3539:1986 Specification for sound level meters
for the measurement of noise
emitted by motor vehicles
EPL/29 confirmed (2011) Reconfirm
BS 7580-1:1997 Specification for the verification of
sound level meters -- Comprehensive procedure
EPL/29 confirmed (2011) Reconfirm
PD 6545:2005 Intended use of human head and
ear simulators-guide
EPL/29 confirmed (2011) Reconfirm
BS 9074 N007:1978 Detail specification for fixed polystyrene film dielectric extended
foil capacitors. Rectangular non-
metallic case, unidirectional terminations. Full plus additional
assessment level
EPL/40X replaced by BS 9074 N007:1981, due to
existing approvals
Withdraw
BS 9070-3:1970 Specification for fixed capacitors of assessed quality: generic data and
methods of test -- Tantalum electrolytic capacitors
EPL/40X replaced by BS CECC 30800:1978, due to
existing approvals
BS 9121:1988 Blank detail specification for radio interference suppression filters of
assessed quality. Basic and full assessment levels
EPL/40X partially replaced by BS EN 133000:1997
BS 9120:1988 Specification for radio interference suppression filters of assessed
quality: generic data and methods
of test
EPL/40X partially replaced by BS EN 133000:1997
BS 9210 N0009-
1:1978
Detail specification for radio
frequency connectors (series SMC) -- Full assessment level
EPL/46 confirmed (2011) Reconfirm
BS 9210:1984 Specification for radio frequency
connectors of assessed quality: generic data and methods of test
EPL/46 replaced by BS CECC
22000:1980 due to existing approvals
Confirm
BS 9210 N007-1:1976 Detail specification for radio frequency connectors (type SMB) --
Full assessment level
EPL/46 confirmed (2011)
BS 9220:1971 Specification for rigid waveguide tubing of assessed quality: generic
data and methods of test
EPL/46 confirmed (2011) Reconfirm
BS 4319-1:1968 Methods of measurement of the electrical properties of electronic
tubes and valves (excluding microwave devices) -- Essential
conditions for measuring equivalent
input and output admittances
EPL/47 confirmed (2011) Reconfirm
BS 4478:1969 Methods of measurement of
intermodulation products in
electronic tubes or valves intended for use in colour television
transposers
EPL/47 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 37 of 148 January 2016
BS 448-2:1981 Dimensions of electronic tubes and
valves -- Specification for dimensions of United Kingdom
electronic tubes
EPL/47 confirmed (2011) Reconfirm
BS 4789:1972 Specification for ceramic components for use in envelopes
for electronic tubes
EPL/47 confirmed (2011) Reconfirm
BS 6600-10:1985 Outline dimensions of transformers
and inductors for use in
telecommunication and electronic equipment -- Specification for the
outline dimensions of transformers and inductors using the Q range of
C-cores
EPL/51 confirmed (2011) Reconfirm
BS 6600-1:1987 Outline dimensions of transformers
and inductors for use in
telecommunication and electronic equipment -- Specification for the
outline dimensions of transformers and inductors using YEI-1
laminations
EPL/51 confirmed (2011) Reconfirm
BS 9751 N0001:1980 Detail specification for fixed insulated (unshielded) radio
frequency inductors. Wire wound on ferrite, iron dust or phenolic
cylindrical former. Full assessment
level
EPL/51 confirmed (2011) Reconfirm
BS 5347:1976 Specification for silicon-iron strip-
wound cores for use in
transformers and inductors for telecommunications and electronic
equipment
EPL/51 confirmed (2011) Reconfirm
BS 9753:1986 Sectional specification for variable
r.f. type inductors of assessed
quality for use in electronic equipment for capability approval
EPL/51 confirmed (2011) Reconfirm
BS 9721:1985 Sectional specification for signal transformers of assessed quality
for use in electronic equipment for capability approval
EPL/51 confirmed (2011) Reconfirm
BS 9727:1985 Sectional specification for power transformers of assessed quality
for use in electronic equipment for
capability approval
EPL/51 confirmed (2011) Reconfirm
BS 9733:1985 Sectional specification for pulse
transformers of assessed quality for use in electronic equipment for
capability approval
EPL/51 confirmed (2011) Reconfirm
BS 9734:1978 Sectional specification for pulse
transformers of assessed quality for use in electronic equipment: full
assessment level
EPL/51 confirmed (2011) Reconfirm
BS 9741:1986 Sectional specification for inductors
of assessed quality for use in electronic equipment for capability
approval
EPL/51 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 38 of 148 January 2016
BS 9751:1979 Blank detail specification for fixed
insulated (unshielded) r.f. inductors at the full assessment level
EPL/51 confirmed (2011) Reconfirm
BS 2857:1976 Specification for nickel-iron
transformer and choke laminations
EPL/51 confirmed (2011) Reconfirm
BS 4309:1968 Methods of measuring the performance of laboratory electric
resistance furnaces
EPL/66 confirmed (2011) Reconfirm
BS 2648:1955 Performance requirements for electrically-heated laboratory
drying ovens
EPL/66 confirmed (2011) Reconfirm
BS 3224-1:1988 Lighting fittings for civil land
aerodromes -- Specification for
lighting units for use in precision approach path indicator systems
EPL/97 confirmed (2011) Reconfirm
BS 3224-4:1988 Lighting fittings for civil land aerodromes -- Specification for
elevated lighting units
EPL/97 confirmed (2011) Reconfirm
BS 3224-6:1988 Lighting fittings for civil land aerodromes -- Specification for
obstacle lighting units
EPL/97 confirmed (2011) Reconfirm
BS 4168-1:1981 Hexagon socket screws and wrench
keys: metric series -- Specification
for hexagon socket head cap screws
FME/9 replaced by BS EN ISO
4762:1998
BS 7371-
6:1998+A1:2011
Coatings on metal fasteners --
Specification for hot dipped galvanized coatings
FME/9 current Confirm
BS 3673-4:1977 Specification for spring retaining rings -- Carbon steel circlips -
metric series
FME/9 confirmed (2011)
BS 7371-8:2011 Coatings on metal fasteners -- Specification for sherardized
coatings
FME/9 current Confirm
BS 3673-2:1965 Specification for spring retaining rings -- Carbon steel E clips
FME/9 confirmed (2011) Withdraw
BS 3673-3:1968 Specification for spring retaining
rings -- Carbon steel C clips
FME/9 confirmed (2011) Withdraw
BS 4895:1981 Specification for semi-tubular rivets
for general purpose use
FME/9 confirmed (2011) Reconfirm
BS 8572:2011 Procurement of facility-related services. Guide
FMW/1 current Confirm
BS 5839-9:2011 Fire detection and fire alarm
systems for buildings -- Code of
practice for the design, installation, commissioning and maintenance of
emergency voice communication systems
FSH/12/5 current
BS 5306-1:2006 Code of practice for fire
extinguishing installations and equipment on premises -- Hose
reels and foam inlets
FSH/14 confirmed (2011) Reconfirm
BS 6266:2011 Fire protection for electronic
equipment installations. Code of practice
FSH/14 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 39 of 148 January 2016
BS 5306-0:2011 Fire protection installations and
equipment on premises -- Guide for selection of installed systems and
other fire equipment
FSH/18 current
BS 9252:2011 Components for residential
sprinkler systems. Specification and test methods for residential
sprinklers
FSH/18/2 current
BS 7944:1999 Type 1 heavy duty fire blankets and type 2 heavy duty heat
protective blankets
FSH/2 confirmed (2011) Reconfirm
BS 7867:1997 Specification for portable fire extinguishers for use in aircraft
FSH/2 confirmed (2011) Reconfirm
BS 476-7:1997 Fire tests on building materials and
structures -- Method of test to determine the classification of the
surface spread of flame of products
FSH/21 confirmed (2011) Reconfirm
BS 476-23:1987 Fire tests on building materials and
structures -- Methods for
determination of the contribution of components to the fire
resistance of a structure
FSH/22 confirmed (2011) Reconfirm
BS 476-21:1987 Fire tests on building materials and structures -- Methods for
determination of the fire resistance
of loadbearing elements of construction
FSH/22 confirmed (2011) Reconfirm
BS 476-31.1:1983 Fire tests on building materials and
structures -- Method of measurement under ambient
temperature conditions
FSH/22 confirmed (2011) Reconfirm
PD 7974-6:2004 The application of fire safety
engineering priciples to fire safety design of buildings -- Human
factors. Life safety strategies. Occupant evacuation, behaviour
and condition (Sub-system 6)
FSH/24 confirmed (2011) Reconfirm
PD 7974-1:2003 Application of fire safety engineering principles to the design
of buildings -- Initiation and
development of fire within the enclosure of origin (Sub-system 1)
FSH/24 confirmed (2011) Reconfirm
PD 7974-4:2003 Application of fire safety
engineering principles to the design of buildings -- Detection of fire and
activation of fire protection
systems. (Sub-system 4)
FSH/24 confirmed (2011) Reconfirm
PD 7974-3:2011 Application of fire safety
engineering principles to the design of buildings -- Structural response
and fire spread beyond the
enclosure of origin
FSH/24 current Confirm
PD 7974-0:2002 Application of fire safety
engineering principles to the design
of buildings -- Guide to design framework and fire safety
engineering procedures
FSH/24 confirmed (2011)
BS 4422:2005 Fire. Vocabulary FSH/9 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 40 of 148 January 2016
BS 4875-7:2006 Strength and stability of furniture --
Domestic and contract storage furniture. Performance
requirements
FW/0/2 confirmed (2011)
BS 8480:2006 Medical devices. Chairs with electrically operated support
surfaces. Requirements
FW/0/2 current
BS
8509:2008+A1:2011
Childrens beds for domestic use.
Safety requirements and test
methods
FW/0/2 current Confirm
BS 6807:2006 Methods of test for assessment of
ignitability of mattresses,
upholstered divans and upholstered bed bases with flaming types of
primary and secondary sources of ignition
FW/6 confirmed (2011)
BS 5852-1:1979 Fire tests for furniture -- Methods
of test for the ignitability by smokers' materials of upholstered
composites for seating
FW/6 confirmed (2011)
BS 5852-2:1982 Fire tests for furniture -- Methods
of test for the ignitability of upholstered composites for seating
by flaming sources
FW/6 confirmed (2011) Reconfirm
BS
7176:2007+A1:2011
Specification for resistance to
ignition of upholstered furniture for
non-domestic seating by testing composites
FW/6 current
BS 5852:2006 Methods of test for assessment of the ignitability of upholstered
seating by smouldering and flaming ignition sources
FW/6 confirmed (2011)
BS 7177:2008+A1:2011
Specification for resistance to ignition of mattresses, mattress
pads, divans and bed bases
FW/6 current
BS 10500:2011 Specification for an anti-bribery management system (ABMS)
G/3 current
BS 4727-2:Group
12:1990
Glossary of electrotechnical, power,
telecommunication, electronics, lighting and colour terms. Terms
particular to power engineering --
Telecontrol terminology
GEL/1 confirmed (2011) Reconfirm
BS 2572:1990 Specification for phenolic laminated sheet and epoxy cotton fabric
laminated sheet
GEL/15 partially replaced by BS EN 60893-3-4:1995
BS 3953:1990 Specification for synthetic resin bonded woven glass fabric
laminated sheet
GEL/15 partially replaced by BS EN 60893-2:1995,
BS EN 60893-3-3:1995, BS EN 60893-
3-6:1995 and BS EN
60893-3-7:1995
Confirm
PD 2379:2005 Register of colours of
manufacturers' identification threads for electric cables and
cords. Tenth Edition
GEL/20 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 41 of 148 January 2016
BS 7870-3.12:2011 LV and MV polymeric insulated
cables for use by distribution and generation utilities -- Specification
for distribution cables of rated voltage 0.6/1 kV. XLPE insulated
combined neutral and earth copper
wire concentric cables with copper or aluminium conductors, having
low emission of smoke and corrosive gases when affected by
fire
GEL/20/16 current Confirm
BS 7870-3.50:2011 LV and MV polymeric insulated cables for use by distribution and
generation utilities -- Specification for distribution cables of rated
voltage 0.6/1 kV. XLPE insulated,
copper wire waveform or helical concentric cables with solid
aluminium conductors, having low emission of smoke and corrosive
gases when affected by fire
GEL/20/16 current
BS 7870-3.22:2011 LV and MV polymeric insulated cables for use by distribution and
generation utilities -- Specification for distribution cables of rated
voltage 0.6/1 kV. XLPE insulated
split concentric cables with copper or aluminium conductors, having
low emission of smoke and corrosive gases when affected by
fire
GEL/20/16 current Confirm
BS 7870-3.11:2011 LV and MV polymeric insulated cables for use by distribution and
generation utilities -- Specification for distribution cables of rated
voltage 0.6/1 kV. XLPE insulated
combined neutral and earth copper wire concentric cables with copper
or aluminium conductors
GEL/20/16 current Confirm
BS 7870-3.40:2011 LV and MV polymeric insulated cables for use by distribution and
generation utilities -- Specification for distribution cables of rated
voltage 0.6/1 kV. XLPE insulated, copper wire waveform concentric
cables with solid aluminium
conductors
GEL/20/16 current Confirm
BS 7870-4.11:2011 LV and MV polymeric insulated
cables for use by distribution and
generation utilities -- Specification for distribution cables with
extruded insulation for rated voltages of 11 kV and 33 kV.
Single-core 33 kV lead sheathed
cables
GEL/20/16 current Confirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 42 of 148 January 2016
BS 7870-3.21:2011 LV and MV polymeric insulated
cables for use by distribution and generation utilities -- Specification
for distribution cables of rated voltage 0.6/1 kV. XLPE insulated
split concentric cables with copper
or aluminium conductors
GEL/20/16 current Confirm
BS 7870-4.10:2011 LV and MV polymeric insulated
cables for use by distribution and generation utilities -- Specification
for distribution cables with
extruded insulation of rated voltages of 11 kV to 33 kV. Single-
core 11 kV to 33 kV cables
GEL/20/16 current Confirm
BS 7870-4.20:2011 LV and MV polymeric insulated cables for use by distribution and
generation utilities -- Specification for distribution cables with
extruded insulation for rated
voltages of 11 kV to 33 kV. Three-core 11 kV cables
GEL/20/16 current Confirm
BS 7870-5:2011 LV and MV polymeric insulated cables for use by distribution and
generation utilities -- Polymeric
insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for
overhead distribution
GEL/20/16 current Confirm
BS 7870-2:2011 LV and MV polymeric insulated cables for use by distribution and
generation utilities -- Methods of test
GEL/20/16 current Confirm
BS 7870-1:2011 LV and MV polymeric insulated
cables for use by distribution and generation utilities -- General
GEL/20/16 current Confirm
BS 8436:2011 Electric cables. Specification for
300/500 V screened electric cables having low emission of smoke and
corrosive gases when affected by fire, for use in walls, partitions and
building voids. Multicore cables
GEL/20/17 current Confirm
BS 7917:1999 Elastomer insulated fire resistant (limited circuit integrity) cables for
fixed wiring in ships and on mobile and fixed offshore units.
Requirements and test methods
GEL/20/6 confirmed (2011) Reconfirm
BS 6883:1999 Elastomer insulated cables for fixed
wiring in ships and on mobile and fixed offshore units. Requirements
and test methods
GEL/20/6 confirmed (2011) Reconfirm
BS 8435:2005 Small craft. Reserve flotation.
Boats up to six metres length of hull
GME/33 confirmed (2011)
BS 5809:1980 Specification for safety and
efficiency of the gas heating equipment of commercial
dishwashing machines
GSE/19 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 43 of 148 January 2016
BS 1179-6:1980 Glossary of terms used in the gas
industry -- Combustion and utilization including installation at
consumers' premises
GSE/2 confirmed (2011) Reconfirm
BS 5991:2006 Specification for indirect gas fired
forced convection air heaters with rated heat inputs greater than 330
kW but not exceeding 2 MW for
industrial and commercial space heating. Safety and performance
requirements (excluding electrical requirements) (2nd family gases)
GSE/20/4 confirmed (2011) Reconfirm
BS 5990:2006 Specification for direct gas-fired
forced convection air heaters with
rated heat inputs greater than 330 kW but not exceeding 2 MW for
industrial and commercial space heating. Safety and performance
requirements (excluding electrical requirements) (2nd family gases)
GSE/20/4 confirmed (2011) Reconfirm
BS 7461:1991 Specification for electrically operated automatic gas shut-off
valves fitted with throughput adjusters, proof of closure
switches, closed position indicator switches or gas flow control
GSE/22 confirmed (2011) Reconfirm
BS 6047-1:1981 Flame supervision devices for
domestic, commercial and catering gas appliances -- Specification for
heat sensitive type
GSE/22 confirmed (2011) Reconfirm
BS 5986:1980 Specification for electrical safety
and performance of gas fired space
heating appliances with inputs 60 kW to 2 MW
GSE/22 confirmed (2011) Reconfirm
BS 1552:1995 Specification for open bottomed taper plug valves for 1st, 2nd and
3rd family gases up to 200 mbar
GSE/22 confirmed (2011) Reconfirm
BS 7462:1991 Specification for electrical safety of
domestic gas appliances
GSE/22 confirmed (2011) Reconfirm
BS 2977:1958 Domestic lighting appliances for
use with liquefied petroleum gases
GSE/24 confirmed (2011) Reconfirm
BS 8660-1:2011 Gas-fired micro-cogeneration appliances of rated thermal input
not exceeding 70 kW net --
Specification for selection, installation, inspection,
commissioning, servicing and maintenance of Stirling engine
micro-cogeneration appliances
GSE/30 current Confirm
BS 6400-2:2006 Specification for installation, exchange, relocation and removal
of gas meters with a maximum capacity not exceeding 6 m$u3/h --
Medium pressure (2nd family
gases)
GSE/30 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 44 of 148 January 2016
BS 6644:2011 Specification for the installation
and maintenance of gas-fired hot water boilers of rated inputs
between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases)
GSE/30 current
BS 6896:2011 Specification for installation and
maintenance of gas-fired overhead
radiant heaters for industrial and commercial heating (2nd and 3rd
family gases)
GSE/30 current Confirm
BS 6230:2011 Specification for installation of gas-fired forced convection air heaters
for commercial and industrial space
heating (2nd and 3rd family gases)
GSE/30 current
BS 7624:2004 Installation and maintenance of
domestic direct gas-fired tumble dryers of up to 6 kW heat input
(2nd and 3rd family gases). Specification
GSE/30/-/20 confirmed (2011) Reconfirm
BS 715:2005 Specification for metal flue boxes
for gas-fired appliances not exceeding 20 kW
GSE/4 confirmed (2011) Reconfirm
BS 669-2:1997 Flexible hoses, end fittings and
sockets for gas burning appliances -- Specification for corrugated
metallic flexible hoses, covers, end fittings and sockets for catering
appliances burning 1st, 2nd and
3rd family gases
GSE/42 confirmed (2011) Reconfirm
BS 7872:2011 Manned security services. Cash and
valuables in transit services (collection and delivery). Code of
practice
GW/3 current Reconfirm
BS 8484:2011 Provision of lone worker device
(LWD) services. Code of practice
GW/3 current
BS 8523:2011 Management and operation of
warden schemes. Code of practice
GW/3 current
BS 8549:2006 Security consultancy. Code of practice
GW/3 confirmed (2011)
BS 1523-1:1967 Glossary of terms used in
automatic controlling and regulating systems -- Process and
kinetic control
I/- confirmed (2011) Withdraw
BS 4783-8:1994 Storage, transportation and maintenance of media for use in
data processing and information storage -- Recommendations for 4
mm and 8 mm helical scan tape
cartridges
ICT/-/1 confirmed (2011) Reconfirm
BS 6475:1984 Specification for processor system
bus interface (Eurobus A)
ICT/-/1 confirmed (2011) Reconfirm
BS 6660-1:2005 Guide to setting up and
maintaining micrographics and digital imaging units --
Micrographics
IDT/1 confirmed (2011) Reconfirm
BS 5261-1:2000 Copy preparation and proof correction -- Design and layout of
documents
IDT/2 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 45 of 148 January 2016
BS 8538:2011 Specification for the provision of
services relating to the commercialization of intellectual
property rights
IMS/1/1 current Confirm
BS 4633 and
4634:1970
Method for the determination of
crystallizing point. Method for the determination of melting point
and/or melting range
ISE/102 confirmed (2011)
BS 5443:1977 Recommendations for a standard
layout for methods of chemical
analysis by gas chromatography
ISE/102 confirmed (2011) Reconfirm
BS 2511:1970 Methods for the determination of
water (Karl Fischer method)
ISE/102 confirmed (2011) Reconfirm
BS 4-1:2005 Structural steel sections --
Specification for hot-rolled sections
ISE/103 confirmed (2011) Reconfirm
PD 970:2005 Wrought steels for mechanical and allied engineering purposes.
Requirements for carbon, carbon manganese and alloy hot worked
or cold finished steels
ISE/105 confirmed (2011) Reconfirm
PD 6635:1999 Non-alloy steel rod for drawing
and/or cold rolling. General purpose rod, rimmed and rimmed
substitute low carbon steel rod, rod for special applications.
Requirements and tests
ISE/106 confirmed (2011) Reconfirm
BS 4087:1989 Specification for copper-covered steel wire for telephone and
telegraph purposes
ISE/106 confirmed (2011) Reconfirm
BS 4637:1970 Specification for carbon steel wire for coiled springs (bedding and
seating)
ISE/106 confirmed (2011) Reconfirm
BS 1429:1980 Specification for annealed round steel wire for general engineering
springs
ISE/106 confirmed (2011) Reconfirm
BS 182:1972 Specification for galvanized line-
wire for telephone and telegraph
purposes
ISE/106 confirmed (2011) Reconfirm
BS 4638:1970 Specification for carbon steel wire
for zigzag and square-form springs
ISE/106 confirmed (2011) Reconfirm
BS 1052:1980 Specification for mild steel wire for
general engineering purposes
ISE/106 confirmed (2011) Reconfirm
BS 7612:1993 Specification for non-circular steel wire for mechanical springs
ISE/106 confirmed (2011)
BS 183:1972 Specification for general purpose
galvanized steel wire strand
ISE/106 confirmed (2011) Reconfirm
BS 4102:1998 Specification for steel wire for
general fencing purposes
ISE/106 confirmed (2011) Reconfirm
BS 2453:1973 Specification for steel wire for spokes
ISE/106 confirmed (2011) Reconfirm
BS 3604-2:1991 Steel pipes and tubes for pressure
purposes: ferritic alloy steel with specified elevated temperature
properties. -- Specification for longitudinally arc welded tubes
ISE/107 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 46 of 148 January 2016
BS 5383:1986 Specification for material
identification of steel, nickel alloy and titanium alloy tubes by
continuous character marking and colour coding of steel tubes
ISE/107 confirmed (2011) Reconfirm
PD 6525-1:1990 Elevated temperature properties
for steels for pressure purposes. --
Stress rupture properties
ISE/107 confirmed (2011) Reconfirm
BS 6582:2000 Continuously hot-dip lead alloy
(terne) coated cold reduced carbon
steel flat rolled products
ISE/109 confirmed (2011) Reconfirm
BS 1640-1:1962 Specification for steel butt-welding
pipe fittings for the petroleum industry -- Wrought carbon and
ferritic alloy steel fittings
ISE/110 partially replaced by
BS EN 10253-2:2007
Reconfirm
PD 6484:1979 Commentary on corrosion at
bimetallic contacts and its
alleviation
ISE/NFE/8 confirmed (2011) Reconfirm
BS 8440-2:2005 Health informatics. Medical digital
imaging. Profiles format --
Particular requirements for metadata profiles
IST/35 confirmed (2011)
BS 8441-2:2006 Health informatics. Medical digital imaging profiles -- “M-IHE6-
4.8MIS-CT” CT images stored
IST/35 confirmed (2011)
BS 8440-1:2005 Health informatics. Medical digital imaging. Profiles format -- General
principles
IST/35 confirmed (2011)
BS 8419-2:2005 Interoperability between metadata systems used for learning,
education and training -- Code of practice for the development of
interoperability between application
profiles
IST/43 confirmed (2011)
BS 8419-1:2005 Interoperability between metadata
systems used for learning,
education and training -- Code of practice for the development of
application profiles
IST/43 confirmed (2011)
PD 7506:2005 Linking knowledge management with other organizational functions
and disciplines. A guide to good
practice
KMS/1 confirmed (2011) Reconfirm
PD 7504:2005 Knowledge management in the
public sector. A guide to good
practice
KMS/1 confirmed (2011) Reconfirm
PD 7501:2003 Managing culture and knowledge.
Guide to good practice
KMS/1 confirmed (2010) Reconfirm
PD 7505:2005 Skills for knowledge working. A
guide to good practice
KMS/1 confirmed (2011) Reconfirm
PD 7503:2003 Introduction to knowledge management in construction
KMS/1 confirmed (2010) Reconfirm
PD 7502:2003 Guide to measurements in
knowledge management
KMS/1 confirmed (2010) Reconfirm
PD 7500:2003 Knowledge Management.
Vocabulary
KMS/1 confirmed (2010) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 47 of 148 January 2016
BS 6940-2:1989 Total Access Communication
System (T.A.C.S) -- Specification for performance and tests of the
signalling system of mobile stations
L/-/99 confirmed (2011) Withdraw
BS 6940-1:1989 Total Access Communication
System (T.A.C.S) -- Specification for performance requirements for
mobile stations
L/-/99 confirmed (2011) Withdraw
BS 1117-2:1964 Specification for bare fine
resistance wire for precision
electrical equipment -- Metric units
L/-/99 confirmed (2011) Withdraw
BS 3467:1962 Method of test for temperature
coefficient of resistance of alloy wire for precision resistors
L/-/99 confirmed (2011) Withdraw
BS 3466:1962 Methods of test for resistance per
unit length of metallic electrical resistance material
L/-/99 confirmed (2011) Withdraw
BS 115:1995 Specification for metallic resistance
materials for electrical purposes
L/-/99 confirmed (2011) Withdraw
BS 4462:1969 Guide for the preparation of technical sales literature for
measuring instruments and process
control equipment
LBI/1/2 confirmed (2011)
BS 2649-3:1988 Methods for analysis of glass --
Glasses of the potassium oxide-lead oxide-silica type
LBI/1/2 confirmed (2011) Withdraw
BS 2649-1:1988 Methods for analysis of glass -- Glasses of the soda-lime-magnesia-
silica type
LBI/1/2 confirmed (2011) Withdraw
BS 1922:1987+A2:2011
Specification for glass dispensing measures for pharmaceutical
purposes
LBI/1/2 current Confirm
BS 5404-2:1977 Specification for plastics laboratory ware -- Graduated measuring
cylinders
LBI/1/2 confirmed (2011) Withdraw
BS 5404-3:1977 Specification for plastics laboratory ware -- Filter funnels
LBI/1/2 confirmed (2011)
BS 894:1956 Specification for Ubbelohde
apparatus for flow and drop points
LBI/1/2 confirmed (2011) Reconfirm
BS 5404-4:1979 Specification for plastics laboratory
ware -- Wash bottles
LBI/1/2 confirmed (2011)
BS 572:1985 Specification for interchangeable conical ground glass joints
LBI/1/2 confirmed (2011) Reconfirm
BS 3108:1980 Specification for limestone for
making colourless glasses
LBI/1/2 confirmed (2011)
BS 5404-1:1976 Specification for plastics laboratory
ware -- Beakers
LBI/1/2 confirmed (2011)
BS 6706:1986 Specification for disposable glass serological pipettes
LBI/1/2 confirmed (2011) Reconfirm
BS 5732:1985 Specification for glass disposable
Pasteur pipettes
LBI/1/2 confirmed (2011)
BS 2701:1956 Specification for Rees-Hugill
powder density flask
LBI/1/2 confirmed (2011)
BS 3447:1962 Glossary of terms used in the glass industry
LBI/1/2 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 48 of 148 January 2016
BS 2761:1983 Specification for spherical ground
joints
LBI/1/2 confirmed (2011)
BS 2461:1983 Specification for gas washing bottles
LBI/1/2 confirmed (2011) Withdraw
BS 1132:1987 Specification for automatic pipettes LBI/1/2 confirmed (2011) Reconfirm
BS 4791:1985 Specification for calorimeter bombs LBI/1/2 confirmed (2011)
BS 2735:1956 Specification for iodine flasks LBI/1/2 confirmed (2011)
BS 4116-4:1992 Conveyor chains, their attachments
and associated chain wheels. -- Specification for chains and
attachments (British series)
MCE/1 confirmed (2011) Reconfirm
BS 3790:2006 Specification for belt drives.
Endless wedge belts, endless V-
belts, banded wedge belts, banded V-belts and their corresponding
pulleys
MCE/10 confirmed (2011) Reconfirm
BS 4548:1987 Specification for synchronous belt drives for industrial applications
MCE/10 replaced by BS ISO 5296:2012
BS 3733:1974 Specification for endless V-belt
drives for agricultural purposes
MCE/10 confirmed (2011) Reconfirm
BS 5540-6:1990 Evaluating particulate contamination of hydraulic fluids --
Method of calibrating liquid
automatic particle-count instruments (using mono-sized
latex spheres)
MCE/18 confirmed (2011) Reconfirm
BS 6005:1997 Specification for moulded transparent polycarbonate bowls
used in compressed air filters and lubricators
MCE/18 confirmed (2011) Reconfirm
BS 6361:1988 Specification for three-pin plug
connectors for electrically controlled fluid power equipment
MCE/18 confirmed (2011) Reconfirm
BS 7993:2011 Twin ferrule connectors and
associated tubing for 316 stainless steel systems. Specification and
test methods
MCE/18/-/4 current
BS 978-2:Addendum
No. 1:1959
Gears for instruments and
clockwork mechanisms. Cycloidal type gears. -- Double circular arc
type gears
MCE/5 confirmed (2011)
BS 2007:1975 Specification for circular gear shaving cutters, 1 to 8 metric
module, accuracy requirements
MCE/5 confirmed (2011) Reconfirm
BS 2062-2:1960 Specification for gear hobs -- Hobs for gears for turbine reduction and
similar drives
MCE/5 replaced by BS 5221:1975, until
international agreement is reached
on tolerances
Confirm
BS 2062-1:1959 Specification for gear hobs -- Hobs
for general purposes, 1 d.p. to 20 d.p. inclusive
MCE/5 replaced by BS
5221:1975, until international
agreement is reached on tolerances
Confirm
BS 5246:1976 Specification for pinion type cutters
for spur gears - 1 to 8 metric
module
MCE/5 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 49 of 148 January 2016
BS 2518-1:1954 Specification for rotary form
relieved gear cutters -- Diametral pitch
MCE/5 confirmed (2011) Reconfirm
BS 4582-2:1978 Specification for fine pitch gears
(metric module) -- Hobs and cutters
MCE/5 confirmed (2011) Reconfirm
BS 978-1:1968 Specification for fine pitch gears. -- Involute spur and helical gears
MCE/5 confirmed (2011) Reconfirm
BS 2518-2:1977 Specification for rotary form relieved gear cutters -- Metric
module
MCE/5 confirmed (2011) Reconfirm
BS 6710:1987 Specification for dimensions of
chain wheel tooth forming tools
MCE/5 confirmed (2011) Reconfirm
BS 978-2:1952 Specification for fine pitch gears --
Cycloidal type gears
MCE/5 confirmed (2011) Reconfirm
BS 2697:1976 Specification for rack type gear cutters, metric module
MCE/5 confirmed (2011) Reconfirm
BS 978-3:1952 Specification for fine pitch gears --
Bevel gears
MCE/5 confirmed (2011) Reconfirm
BS 721-1:1963 Specification for worm gearing --
Imperial units
MCE/5 confirmed (2011) Reconfirm
BS 721-2:1983 Specification for worm gearing -- Metric units
MCE/5 confirmed (2011) Reconfirm
BS 6168:1987 Specification for non-metallic spur
gears
MCE/5 confirmed (2011) Reconfirm
BS 4082-1:1969 Specification for external
dimensions for vertical in-line centrifugal pumps -- 'I' Type
MCE/6 confirmed (2011) Reconfirm
BS 4082-2:1969 Specification for external
dimensions for vertical in-line centrifugal pumps -- 'U' Type
MCE/6 confirmed (2011) Reconfirm
BS 5257:1975 Specification for horizontal end-
suction centrifugal pumps (16 bar)
MCE/6 confirmed (2011)
BS 4278:1984 Specification for eyebolts for lifting purposes
MHE/1 replaced by BS EN ISO 3266:2010 and has
been declared obsolescent
Confirm
BS 6451:1984 Specification for netting and fibre rope load restraint systems in
surface transport
MHE/16 confirmed (2011) Reconfirm
BS 6756:1986 Specification for fibre rope cargo nets
MHE/16 confirmed (2011) Reconfirm
BS 2573-1:1983 Rules for the design of cranes --
Specification for classification, stress calculations and design
criteria for structures
MHE/3 replaced by BS EN
13001-1:2004+A1:2009, BS
EN 13001-2:2014, BS EN 13001-3-
1:2012+A1:2013, BS
EN 13001-3-2, BS EN 13001-3-3, BS EN
13001-3-4 and DD CEN/TS 13001-3-
5:2010
Confirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 50 of 148 January 2016
BS 2573-2:1980 Rules for the design of cranes --
Specification for classification, stress calculations and design of
mechanisms
MHE/3 replaced by BS EN
13001-1:2004+A1:2009, BS
EN 13001-2:2014, BS EN 13001-3-
1:2012+A1:2013, BS
EN 13001-3-2, BS EN 13001-3-3, BS EN
13001-3-4 and DD CEN/TS 13001-3-
5:2010
Confirm
BS 5744:1979 Code of practice for safe use of
cranes (overhead/underhung travelling and goliath cranes, high
pedestal and portal jib dockside cranes, manually-operated and
light cranes, container handling cranes and rail-mounted low
carriage cranes)
MHE/3/11 partially replaced by
Parts 1 to 3 of BS 7121. When all parts
of BS 7121 have been published BS 5744 will
be revised to cover manually operated and
light cranes only
Confirm
BS 7121-14:2005 Code of practice for safe use of
cranes -- Side boom pipelayers
MHE/3/11 confirmed (2011) Reconfirm
BS 7121-5:2006 Code of practice for safe use of cranes -- Tower cranes
MHE/3/11 confirmed (2011) Reconfirm
BS 8486-
2:2007+A1:2011
Examination and test of new lifts
before putting into service.
Specification for means of determining compliance with BS EN
81 -- Hydraulic lifts
MHE/4 current
BS 8486-1:2007+A1:2011
Examination and test of new lifts before putting into service.
Specification for means of
determining compliance with BS EN 81 -- Electric lifts
MHE/4 current
BS 6440:2011 Powered vertical lifting platforms
having non-enclosed or partially enclosed liftways intended for use
by persons with impaired mobility.
Specification
MHE/4 current
BS 5655-6:2011 Lifts and service lifts -- Code of practice for the selection,
installation and location of new lifts
MHE/4 current
BS 7801:2011 Escalators and moving walks. Code of practice for safe working on
escalators and moving walks
MHE/4 current Confirm
BS 4430-2:1969 Recommendations for the safety of powered industrial trucks --
Operation and maintenance
MHE/7 confirmed (2011)
BS 8439:2005 Continuous handling equipment
and systems. Guide to properties of
powders and bulk materials
MHE/9 confirmed (2011) Reconfirm
BS 8905:2011 Framework for the assessment of
the sustainable use of materials.
Guidance
MI/1 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 51 of 148 January 2016
BS 3876-2:1990 Rope rollers, pulleys, mountings
and assemblies for colliery track haulage -- Specification for vertical
spindle pulleys, mountings and assemblies
MRE/1 confirmed (2011) Reconfirm
BS 3876-1:1990 Rope rollers, pulleys, mountings
and assemblies for colliery track haulage -- Specification for parallel
barrel rollers, mountings and assemblies
MRE/1 confirmed (2011) Reconfirm
BS 3876-5:1990 Rope rollers, pulleys, mountings
and assemblies for colliery track haulage -- Specification for
suspended pulley assemblies and
clamps
MRE/1 confirmed (2011) Reconfirm
BS 6680:1985 Specification for flameproof
equipment for diesel engines for
use in coal mines and other mines susceptible to firedamp
MRE/1 confirmed (2011) Reconfirm
BS 5620:1995 Specification for 200 A 1100 V
flameproof restrained and bolted
plugs and sockets for use in coal mines
MRE/1 confirmed (2011) Reconfirm
BS 1090:1970 Specification for flameproof hand-held electric drilling machines
primarily for use in mines
MRE/1 confirmed (2011) Reconfirm
BS 4878:1973 Specification for large (vee-throated) haulage rope pulleys for
mines and quarries
MRE/1 confirmed (2011) Reconfirm
BS 2593:1974 Specification for rotary drill rods
and tungsten carbide tipped rotary
drill bits
MRE/1 confirmed (2011) Reconfirm
BS 3237:1960 Specification for light and medium
rolling stock for mineral haulage in
mines
MRE/1 confirmed (2011) Reconfirm
BS 4073:1966 Specification for heavy rolling stock
for mineral haulage in mines
MRE/1 confirmed (2011) Reconfirm
BS 3618-7:1973 Glossary of mining terms --
Electrical engineering and lighting
MRE/1 confirmed (2011) Reconfirm
BS 3618-9:1974 Glossary of mining terms -- Shafts and associated equipment
MRE/1 confirmed (2011) Reconfirm
BS 248:1969 Specification for light rails and
fishplates for use at mines
MRE/1 confirmed (2011) Reconfirm
BS 227:1995 Specification for H-section steel
arches for use in mines
MRE/1 confirmed (2011) Reconfirm
BS 3618-1:1969 Glossary of mining terms -- Planning and surveying
MRE/1 confirmed (2011) Reconfirm
BS 3618-3:1971 Glossary of mining terms -- Boring
and exploration
MRE/1 confirmed (2011) Reconfirm
BS 3618-6:1972 Glossary of mining terms -- Drilling
and blasting
MRE/1 confirmed (2011) Reconfirm
BS 3618-8:1974 Glossary of mining terms -- Winning and working
MRE/1 confirmed (2011) Reconfirm
BS 3618-11:1967 Glossary of mining terms -- Strata
control
MRE/1 confirmed (2011) Reconfirm
BS 4854:1972 Specification for cars for manriding
in mines
MRE/1 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 52 of 148 January 2016
BS 3618-2:1971 Glossary of mining terms --
Ventilation
MRE/1 confirmed (2011) Reconfirm
BS 3618-10:1967 Glossary of mining terms -- Transport
MRE/1 confirmed (2011) Reconfirm
BS 3618-4:1971 Glossary of mining terms --
Drainage
MRE/1 confirmed (2011) Reconfirm
BS 3618-5:1971 Glossary of mining terms --
Geology
MRE/1 confirmed (2011) Reconfirm
BS 6907-4:1988 Electrical installations for open-cast mines and quarries --
Recommendations for winning, stacking and processing machinery,
pumps and low signal level and
communications systems
MRE/3 confirmed (2011) Reconfirm
BS 7383:1990 Specification for cold-pour resin-
based compound for use as a filling
medium in terminating cables in enclosures for voltages not
exceeding 11 kV for use in coal mines
MRE/3 confirmed (2011) Reconfirm
BS 7019:1989 Specification for fully screened 400
A bolted flameproof cable couplers and adaptors for use on systems
up to and including 6.6 kV, primarily for use in mines
MRE/3 confirmed (2011) Reconfirm
BS 787-2:1968 Specification for mining type
flameproof gate-end boxes -- Gate-
end boxes with air-break circuit-breakers (for use on 3-phase a.c.
circuits up to 650 volts)
MRE/3 confirmed (2011) Reconfirm
BS 787-1:1969 Specification for mining type flameproof gate-end boxes -- Gate-
end boxes for direct-on-line motor
starting (for use on 3-phase a.c. circuits up to 650 V)
MRE/3 confirmed (2011) Reconfirm
BS 5126-4:1993 Mining type flameproof supply and
control units for use on systems up to 1100 V -- Specification for air-
cooled transformers to power
drilling machines
MRE/3 confirmed (2011) Reconfirm
BS 6709:1986 Specification for interconnection of electrical apparatus, constructed to
two or more British Standards, for use in mines susceptible to
firedamp
MRE/3 confirmed (2011) Reconfirm
BS 6907-2:1988 Electrical installations for open-cast mines and quarries -- General
recommendations for protection
against direct contact and electric shock
MRE/3 confirmed (2011) Reconfirm
BS 787-4:1972 Specification for mining type
flameproof gate-end boxes -- Gate-end boxes for drilling machines (for
use on 3-phase a.c. circuits up to
650 V)
MRE/3 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 53 of 148 January 2016
BS 5126-3:1993 Mining type flameproof supply and
control units for use on systems up to 1100 V -- Specification for air-
cooled lighting transformer units
MRE/3 confirmed (2011) Reconfirm
BS 3101:1986 Specification for control and
interlock circuits primarily associated with flameproof
restrained plugs and sockets for
use in coal mines
MRE/3 confirmed (2011) Reconfirm
BS 5126-1:1993 Mining type flameproof supply and
control units for use on systems up to 1100 V -- Specification for
direct-on-line motor starters
MRE/3 confirmed (2011) Reconfirm
BS 7924:1999 Code of practice for the repair and
overhaul of certified electrical
apparatus intended for use in mines susceptible to firedamp
MRE/3 confirmed (2011) Reconfirm
BS 7202:1989 Specification for non-incendive low voltage control/interlock and low
voltage earth fault monitoring circuits for use in mines
MRE/3 confirmed (2011) Reconfirm
BS 5126-2:1993 Mining type flameproof supply and control units for use on systems up
to 1100 V -- Specification for circuit
breaker units
MRE/3 confirmed (2011) Reconfirm
BS 6704:1996 Code of practice for selection,
installation and maintenance of intrinsically safe electrical
equipment in coal mines
MRE/3 confirmed (2011) Reconfirm
BS 6907-3:1988 Electrical installations for open-cast
mines and quarries -- Recommendations for equipment
and ancillaries
MRE/3 confirmed (2011) Reconfirm
BS 3905:1995 Specification for 3.8/6.6 kV, 300 A
bolted flameproof cable couplers and adaptors, for use in coal
mines.
MRE/3 confirmed (2011) Reconfirm
BS 6705:1987 Specification for electrical measuring instruments for use on
intrinsically safe circuits in coal
mines
MRE/3 confirmed (2011) Reconfirm
BS 5125:1990 Specification for 50 A 650 V
flameproof, restrained and bolted plugs and sockets for use in coal
mines
MRE/3 confirmed (2011) Reconfirm
BS 787-3:1971 Specification for mining type
flameproof gate-end boxes -- Gate-
end boxes with lighting transformers
MRE/3 confirmed (2011) Reconfirm
BS 6182-1:1994 Intriniscally safe power supplies for
use in coal mines -- Specification for d.c. power supplies
MRE/3 confirmed (2011) Reconfirm
BS 6182-2:1982 Intrinsically safe power supplies for
use in coal mines -- Specification for a.c. power supplies
MRE/3 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 54 of 148 January 2016
BS 6907-5:1988 Electrical installations for open-cast
mines and quarries -- Recommendations for operation
MRE/3 confirmed (2011) Reconfirm
BS 6556-2:1985 Low speed digital signals for use in
coal mines -- Specification for transformer coupling
MRE/3 confirmed (2011) Reconfirm
BS 6556-1:1985 Low speed digital signals for use in coal mines. -- Specification for
optical coupling
MRE/3 confirmed (2011) Reconfirm
BS 6556-3:1985 Low speed digital signals for use in coal mines -- Specification for
message protocols
MRE/3 confirmed (2011) Reconfirm
BS 5754:1987 Specification for electrical analogue and state signals for use in coal
mines
MRE/3 confirmed (2011) Reconfirm
BS 6353:1983 Specification for underground loudspeaker communication
systems in coal mines
MRE/3 confirmed (2011) Reconfirm
BS 6907-1:1988 Electrical installations for open-cast mines and quarries -- Glossary
MRE/3 confirmed (2011) Reconfirm
BS 5067:1985 Specification for flameproof
transformers for use in mines
MRE/3 confirmed (2011) Reconfirm
BS 6708:1998 Flexible cables for use at mines and quarries
MRE/3 confirmed (2011) Reconfirm
BS 3138:1992 Glossary of terms used in management services
MS/1 confirmed (2011) Reconfirm
BS 3641-2:1980 Symbols for machine tools --
Specification for numerical control symbols
MTE/1 confirmed (2011) Reconfirm
PD 6490:1980 Guide to application of additional
symbols (and index) for machine tools
MTE/1 confirmed (2011) Reconfirm
BS 3766:1979 Specification for coolant pumps for
machine tools
MTE/1 confirmed (2011) Reconfirm
BS 4656-9:1974 Accuracy of machine tools and methods of test -- External
cylindrical grinding machines with reciprocating table
MTE/1/2 confirmed (2011) Reconfirm
BS 7794:1995 Specification for square-drive sockets, driving squares and
accessories for power-driven socket
wrenches
MTE/15 confirmed (2011) Reconfirm
BS 2090:1954 Specification for hook spanners,
peg spanners, coupling wrenches and the related slots, holes and
horns
MTE/15 confirmed (2011) Reconfirm
BS 6101-6:1990 Machine tool ball screws -- Specification for ball nuts and
principal dimensions of ball screws
MTE/15 confirmed (2011) Reconfirm
BS 3087-10:1991 Pliers and nippers -- Specification
for dimensions of tools not
standardized by ISO
MTE/15 confirmed (2011) Reconfirm
BS 3159-2:1993 Woodworking saws for hand use --
Specification for tenon and dovetail
saws
MTE/15 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 55 of 148 January 2016
BS 4006:1992 Specification for hand operated
square drive socket wrenches and accessories
MTE/15 confirmed (2011) Reconfirm
BS 1842:1952 Specification for double-ended
open-jawed spanners for B.A. hexagon sizes
MTE/15 confirmed (2011) Reconfirm
BS 1937:1953 Specification for engineers' ratchet braces and drilling pillars
MTE/15 confirmed (2011) Reconfirm
BS 3159-1:1999 Woodworking saws for hand use -- Specification for hand saws
MTE/15 confirmed (2011) Reconfirm
BS 3054:1959 Specification for fireman's axe with
rubber insulated handle
MTE/15 confirmed (2011) Reconfirm
BS 3594-2:1965 Specification for pipe wrenches -- Footprint type wrenches
MTE/15 confirmed (2011) Reconfirm
BS 3594-1:1963 Specification for pipe wrenches -- Stillson type wrenches
MTE/15 confirmed (2011) Reconfirm
BS 2559:1994 Specification for screwdrivers and
screwdriver accessories
MTE/15 confirmed (2011) Reconfirm
BS 2559-3:1973 Specification for screwdrivers -- Insulated screwdrivers
MTE/15 confirmed (2011) Reconfirm
BS 3066:1995 Specification for engineers' cold chisels and allied tools
MTE/15 confirmed (2011) Reconfirm
BS 3388:2004 Forks, shovels and spades.
Requirements and test methods
MTE/15 confirmed (2011) Reconfirm
BS 3823:1990 Grading of ash and hickory wood handles for hand tools
MTE/15 confirmed (2011) Reconfirm
BS 3123:1959 Specification for spring calipers and spring dividers
MTE/15 confirmed (2011) Reconfirm
BS 1421:1995 Specification for picks, beater picks
and mattocks
MTE/15 confirmed (2011) Reconfirm
BS 3623:1981 Specification for woodworkers' metal-bodied planes
MTE/15 confirmed (2011) Reconfirm
BS 1943:1989 Specification for woodworking chisels and gouges
MTE/15 confirmed (2011) Reconfirm
BS 3322:1981 Specification for carpenters'
squares and bevels
MTE/15 confirmed (2011) Reconfirm
BS 2957:1958 Specification for fireman's axe with ash handle
MTE/15 confirmed (2011) Reconfirm
BS 3087-1:1991 Pliers and nippers -- General introduction
MTE/15 confirmed (2011) Reconfirm
BS 498:1990 Specification for rasps and
engineers' files
MTE/15 confirmed (2011) Reconfirm
BS 5708:1979 Specification for pruner shears (secateurs)
MTE/15 confirmed (2011) Reconfirm
BS 192-1:1996 Open-ended wrenches -- Metric and unified
MTE/15 confirmed (2011) Reconfirm
BS 2556:1973 Specification for hand and breast
drills
MTE/15 confirmed (2011) Reconfirm
BS 2589:1955 Specification for railway track spanners
MTE/15 confirmed (2011) Reconfirm
BS 2054:1953 Specification for augers and auger bits
MTE/15 confirmed (2011) Reconfirm
BS 2558:1954 Specification for tubular box
spanners
MTE/15 confirmed (2011) Reconfirm
BS 7586:1992 Specification for combination wrenches
MTE/15 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 56 of 148 January 2016
BS 7398:1991 Specification for hand hacksaw
frames
MTE/15 confirmed (2011) Reconfirm
BS 2945:1995 Specification for axes and hatchets MTE/15 confirmed (2011) Reconfirm
BS 2583:1955 Specification for podger spanners MTE/15 confirmed (2011) Reconfirm
BS 3555:1988 Specification for ring wrenches MTE/15 confirmed (2011) Reconfirm
BS 2558:Supplement
No. 1:1968
Metric sizes MTE/15 confirmed (2011) Reconfirm
BS 876:1995 Specification for hand hammers MTE/15 confirmed (2011) Reconfirm
BS 1978:1965 Specification for bit braces MTE/15 confirmed (2011) Reconfirm
BS 1660-3:1988 Machine tapers -- Specification for
turret sockets and reduction
sleeves with tapped ends for tools with Morse taper shanks
MTE/18 confirmed (2011) Reconfirm
BS 1660-7:1988 Machine tapers -- Specification for extension adaptors with external
7/24 tapers for tools with Morse taper shanks
MTE/18 confirmed (2011) Reconfirm
BS 949-2:1992 Screwing taps -- Specification for unified ground thread taps.
Manufacturing tolerances
MTE/18 confirmed (2011) Reconfirm
BS 1813:1974 Specification for dimensions of conduit dies, diestocks and guides
MTE/18 confirmed (2011) Reconfirm
BS 3088:1959 Specification for adjustable hand
reamers with inserted blades
MTE/18 confirmed (2011) Reconfirm
BS 328-4:1983 Drills and reamers -- Specification
for dimensions of reamers
MTE/18 confirmed (2011) Reconfirm
BS 1098-1:1967 Specification for jig bushes -- Inch units
MTE/18 the requirements for metric units in BS
1098:1967 prior to its re-numbering as BS
1098-1:1967 have
been replaced by BS 1098-2:1977
Confirm
BS 1919-1:1993 Hacksaw blades -- Specification for hand and machine hacksaw blades
MTE/20 confirmed (2011) Reconfirm
BS 411:1969 Specification for circular saws for
woodworking and their attachment
MTE/20 confirmed (2011) Reconfirm
BS 1919-2:1995 Hacksaw blades -- Specification for
cutting performance
MTE/20 confirmed (2011) Reconfirm
BS 3877:1991 Specification for metal cutting bandsaw blades
MTE/20 confirmed (2011) Reconfirm
BS 4411:1969 Specification for woodcutting
bandsaw blades
MTE/20 confirmed (2011) Reconfirm
BS 6271:1982 Specification for miniature hacksaw
blades
MTE/20 confirmed (2011) Reconfirm
BS 4078-1:1987 Powder actuated fixing systems -- Code of practice for safe use
MTE/21 confirmed (2011) Reconfirm
BS 4078-2:1989 Powder actuated fixing systems --
Specification for tools
MTE/21 confirmed (2011) Reconfirm
BS 4094-1:1966 Recommendation for data on
shielding from ionizing radiation -- Shielding from gamma radiation
NCE/2 current
BS 4094-2:1971 Recommendation for data on shielding from ionizing radiation --
Shielding from X-radiation
NCE/2 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 57 of 148 January 2016
BS 4513:1969 Specification for lead bricks for
radiation shielding
NCE/2 confirmed (2011) Reconfirm
BS 4975:1990 Specification for prestressed concrete pressure vessels for
nuclear engineering
NCE/9 confirmed (2011) Reconfirm
BS 3338-13:1965 Methods for the sampling and analysis of tin and tin alloys --
Method for the determination of antimony in solders and white
metal bearing alloys (volumetric:
potassium bromate method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-8:1961 Methods for the sampling and
analysis of tin and tin alloys -- Method for the determination of
bismuth in ingot tin, tin-lead
solders and white metal bearing alloys (photometric method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-10:1961 Methods for the sampling and
analysis of tin and tin alloys -- Method for the determination of
iron in ingot tin, tin-lead solders and white metal bearing alloys
(photometric method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-9:1965 Methods for the sampling and analysis of tin and tin alloys --
Method for the determination of arsenic in ingot tin, solders and
white metal bearing alloys
(photometric method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-15:1965 Methods for the sampling and
analysis of tin and tin alloys -- Method for the determination of
copper and lead in white metal
bearing alloys (electrodeposition method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-18:1966 Methods for the sampling and
analysis of tin and tin alloys -- Method for the determination of
aluminium in solders and white metal bearing alloys (photometric
method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-17:1965 Methods for the sampling and analysis of tin and tin alloys --
Method for the determination of cadmium in solders and white
metal bearing alloys (photometric
method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-19:1966 Methods for the sampling and
analysis of tin and tin alloys --
Method for the determination of zinc in solders and white metal
bearing alloys (photometric method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-16:1965 Methods for the sampling and
analysis of tin and tin alloys -- Method for the determination of tin
in white metal bearing alloys (nickel coil reduction method)
NFE/27 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 58 of 148 January 2016
BS 3338-5:1961 Methods for the sampling and
analysis of tin and tin alloys -- Method for the determination of
lead in ingot tin and tin-antimony solders (photometric method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-4:1961 Methods for the sampling and
analysis of tin and tin alloys --
Method for the determination of copper in ingot tin and tin-lead
solders (photometric method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-7:1961 Methods for the sampling and analysis of tin and tin alloys --
Method for the determination of
silver in solders (volumetric: ammonium thiocyanate method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-6:1961 Methods for the sampling and
analysis of tin and tin alloys -- Method for the determination of
copper in high purity ingot tin
(photometric method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-11:1961 Methods for the sampling and analysis of tin and tin alloys --
Method for the determination of tin in solders (nickel coil reduction
method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-2:1961 Methods for the sampling and analysis of tin and tin alloys --
Method for the determination of tin
in ingot tin (aluminium reduction method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-20:1970 Methods for the sampling and analysis of tin and tin alloys --
Method for the determination of
nickel in capping metal (photometric method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-3:1961 Methods for the sampling and
analysis of tin and tin alloys -- Method for the determination of
antimony in ingot tin (photometric method)
NFE/27 confirmed (2011) Reconfirm
BS 3338-14:1965 Methods for the sampling and
analysis of tin and tin alloys -- Method for the sampling of white
metal bearing alloy ingots
NFE/27 confirmed (2011) Reconfirm
BS 3338-21:1983 Methods for the sampling and
analysis of tin and tin alloys -- Determination of high cadmium
content of soft solders
NFE/27 confirmed (2011) Reconfirm
BS 4393:1991 Specification for solderable tin or
tin-lead coated wires for
component terminations
NFE/27 confirmed (2011) Reconfirm
BS 61:1969 Specification for threads for light
gauge copper tubes and fittings
NFE/34 confirmed (2011) Reconfirm
BS 6931:1988 Glossary of terms for copper and
copper alloys
NFE/34 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 59 of 148 January 2016
BS 3907-10:1969 Methods for the analysis of
magnesium and magnesium alloys -- Determination of manganese in
magnesium alloys containing zirconium, rare earths, thorium
and/or silver (photometric method)
NFE/35 confirmed (2011)
BS 3907-5:1966 Methods for the analysis of magnesium and magnesium alloys
-- Determination of manganese in magnesium and magnesium alloys
(photometric-periodate method)
(low contents)
NFE/35 confirmed (2011)
BS 3907-2:1966 Methods for the analysis of
magnesium and magnesium alloys
-- Determination of iron in magnesium and magnesium alloys
(photometric - 1:10-phenanthroline method)
NFE/35 confirmed (2011)
BS 3907-4:1966 Methods for the analysis of
magnesium and magnesium alloys -- Determination of manganese in
magnesium and magnesium alloys (photometric-periodate method)
NFE/35 confirmed (2011)
BS 3907-15:1976 Methods for the analysis of
magnesium and magnesium alloys
-- Determination of lead in magnesium and magnesium alloys
(atomic absorption method)
NFE/35 confirmed (2011)
BS 3907-12:1971 Methods for the analysis of magnesium and magnesium alloys
-- Determination of aluminium in
magnesium and magnesium alloys (photometric method)
NFE/35 confirmed (2011)
BS 3907-6:1969 Methods for the analysis of
magnesium and magnesium alloys -- Determination of zirconium in
magnesium and magnesium alloys
(photometric method)
NFE/35 confirmed (2011) Reconfirm
BS 3907-11:1970 Methods for the analysis of magnesium and magnesium alloys
-- Determination of silicon in magnesium and magnesium alloys
(photometric method)
NFE/35 confirmed (2011)
BS 3907-9:1969 Methods for the analysis of
magnesium and magnesium alloys -- Determination of zinc in
magnesium alloys (ion-exchange-volumetric EDTA method)
NFE/35 confirmed (2011)
BS 3907-3:1966 Methods for the analysis of magnesium and magnesium alloys
-- Determination of copper in magnesium and magnesium alloys
(photometric method)
NFE/35 confirmed (2011)
BS 1728-18:1970 Methods for the analysis of
aluminium and aluminium alloys -- Determination of zinc (ion-
exchange-volumetric EDTA or
NFE/35 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 60 of 148 January 2016
polarographic method)
BS 3907-13:1972 Methods for the analysis of
magnesium and magnesium alloys -- Determination of tin in
magnesium and magnesium alloys
(photometric method)
NFE/35 confirmed (2011)
BS 3907-8:1970 Methods for the analysis of magnesium and magnesium alloys
-- Determination of total rare earths in magnesium alloys
(gravimetric method)
NFE/35 confirmed (2011)
BS 3907-1:1965 Methods for the analysis of
magnesium and magnesium alloys -- Determination of aluminium in
magnesium alloys (gravimetric method)
NFE/35 confirmed (2011)
BS 1728-12:1961 Methods for the analysis of
aluminium and aluminium alloys --
Determination of silicon (absorptiometric molybdenum blue
method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-8:1957 Methods for the analysis of aluminium and aluminium alloys --
Determination of iron
(absorptiometric 1:10-phenanthroline method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-9:1957 Methods for the analysis of
aluminium and aluminium alloys -- Determination of manganese
(volumetric: arsenite/nitrite
method)
NFE/35 confirmed (2011) Reconfirm
BS 3907-7:1969 Methods for the analysis of
magnesium and magnesium alloys
-- Determination of nickel in magnesium alloys (photometric
method)
NFE/35 confirmed (2011)
BS 1728-6:1955 Methods for the analysis of
aluminium and aluminium alloys --
Determination of iron (volumetric: titanous chloride method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-19:1971 Methods for the analysis of aluminium and aluminium alloys --
Determination of magnesium (atomic absorption method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-10:1957 Methods for the analysis of aluminium and aluminium alloys --
Determination of manganese
(absorptiometric method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-22:1972 Methods for the analysis of
aluminium and aluminium alloys -- Determination of magnesium
(volumetric CDTA method)
NFE/35 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 61 of 148 January 2016
BS 1728-11:1960 Methods for the analysis of
aluminium and aluminium alloys -- Determination of silicon (perchloric
acid method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-20:1971 Methods for the analysis of
aluminium and aluminium alloys -- Determination of lead (atomic
absorption method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-5:1953 Methods for the analysis of
aluminium and aluminium alloys --
Determination of copper (absorptiometric method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-16:1968 Methods for the analysis of aluminium and aluminium alloys --
Determination of chromium (photometric method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-17:1968 Methods for the analysis of aluminium and aluminium alloys --
Determination of chromium (volumetric method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-14:1965 Methods for the analysis of aluminium and aluminium alloys --
Determination of nickel
(gravimetric method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-15:1966 Methods for the analysis of
aluminium and aluminium alloys -- Determination of nickel
(photometric method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-23:1976 Methods for the analysis of
aluminium and aluminium alloys -- Copper (atomic absorption
method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-24:1976 Methods for the analysis of aluminium and aluminium alloys --
Nickel (atomic absorption method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-21:1973 Methods for the analysis of aluminium and aluminium alloys --
Zinc (atomic absorption method)
NFE/35 confirmed (2011) Reconfirm
BS 1728-1:1951 Methods for the analysis of aluminium and aluminium alloys --
Determination of copper
NFE/35 confirmed (2011) Reconfirm
BS 4574:1970 Recommendation for the
determination of the ink
absorbency of paper and board by use of K & N ink
PAI/11 confirmed (2011) Reconfirm
BS 6563:1985 Method for determination of the roughness of paper and board by
the Parker Print-surf apparatus
PAI/11 confirmed (2011) Reconfirm
BS 4497:1969 Recommendations for the detection and estimation of nitrogenous
treating agents in paper
PAI/11 confirmed (2011) Reconfirm
BS 4818:1993 Method for determination of the
creasing quality of carton board
(Pira method)
PAI/11 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 62 of 148 January 2016
BS 6504:1984 Method for determination of water
absorption of paper and board (Klemm method)
PAI/11 confirmed (2011) Reconfirm
BS 4264:1987 Specification for envelopes for
commercial, official and professional use
PAI/11 confirmed (2011) Reconfirm
BS 4816:1972 Method for the determination of the puncture resistance of board
PAI/11 confirmed (2011) Reconfirm
BS 4896:1973 Method for the determination of ash of pulp
PAI/11 confirmed (2011) Reconfirm
BS 6410:1991 Methods of test for filter papers PAI/11 confirmed (2011) Reconfirm
BS 5261-2:2005 Copy preparation and proof correction -- Specification for
typographic requirements, marks for copy preparation and proof
correction, proofing procedure
PAI/43 confirmed (2011) Reconfirm
BS 5261C:2005 Copy preparation and proof
correction -- Marks for copy preparation and proof correction
(extracted from BS 5261-2:2005)
PAI/43 confirmed (2011) Reconfirm
BS 159:1992 Specification for high-voltage
busbars and busbar connections
PEL/17/1 confirmed (2011) Reconfirm
BS 5000-3:2006 Rotating electrical machines of particular types or for particular
applications -- Generators to be
driven by reciprocating internal combustion engines. Requirements
for resistance to vibration
PEL/2 confirmed (2011) Reconfirm
BS 6121-5:2005 Mechanical cable glands -- Code of practice for selection, installation
and inspection of cable glands and armour glands
PEL/213 confirmed (2011) Reconfirm
BS 6121-1:2005 Mechanical cable glands -- Armour glands. Requirements and test
methods
PEL/213 confirmed (2011) Reconfirm
BS 8020:2011 Tools for live working. Specification for insulating hand tools for work
on or near conductor rail systems operating at voltages up to 1000 V
a.c. or 1500 V d.c.
PEL/78 current
BS 7194:1990 Specification for direct-current and
low-frequency electronic measuring instruments with a digital display
PEL/85 confirmed (2011) Reconfirm
BS 5164:1975 Specification for indirect-acting
electrical indicating and recording instruments and their accessories
PEL/85 confirmed (2011) Reconfirm
BS 90:1975 Specification for direct-acting electrical recording instruments
and their accessories
PEL/85 confirmed (2011) Reconfirm
BS 3693:1992 Recommendations for design of scales and indexes on analogue
indicating instruments
PEL/85 confirmed (2011) Reconfirm
BS 6366:2011 Specification for studs for rugby football boots
PH/3/11 current Confirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 63 of 148 January 2016
BS 8468-1:2006 Respiratory equipment for use
against chemical, biological, radiological and nuclear (CBRN)
agents -- Positive pressure, self-contained, open-circuit breathing
apparatus. Specification
PH/4 confirmed (2011) Reconfirm
BS 8468-3.2:2009 Respiratory protective devices for use against chemical, biological,
radiological and nuclear (CBRN) agents -- Air-purifying devices
incorporating a hood for escape.
Specification
PH/4 current Confirm
BS 8468-6.1:2011 Respiratory protective devices for
use against chemical, biological,
radiological and nuclear (CBRN) agents -- Positive-pressure
compressed airline equipment. Specification
PH/4 current Confirm
BS 8468-6.2:2011 Respiratory protective devices for
use against chemical, biological, radiological and nuclear (CBRN)
agents -- Constant flow compressed airline equipment.
Specification
PH/4 current Confirm
BS 8468-5:2011 Respiratory protective devices for use against chemical, biological,
radiological and nuclear (CBRN) agents -- Dual-mode apparatus.
Specification
PH/4 current Confirm
BS 8478:2011 Respiratory protective devices.
Breathing gases for diving and hyperbaric applications.
Requirements and test methods
PH/4/7 partially replaced by
BS EN 12021:2014
BS 8454:2006 Code of practice for the delivery of
training and education for work at height and rescue
PH/5 confirmed (2011)
BS 3238-1:1960 Graphical symbols for components
of servo-mechanisms -- Transductors and magnetic
amplifiers
PH/8/1 confirmed (2011)
BS 3238-2:1964 Graphical symbols for components of servo-mechanisms -- General
servo-mechanisms
PH/8/1 confirmed (2011)
BS 8501:2002 Graphical symbols and signs. Public information symbols
PH/8/2 confirmed (2011)
BS 1133-8:2011 Packaging code -- Guidance on
wooden boxes, cases and crates
PKW/0/-/11 current Reconfirm
BS 5168:1975 Glossary of rheological terms PRI/10 confirmed (2011) Reconfirm
BS 2782-0:2011 Methods of testing plastic --
Introduction
PRI/21 current
BS 5923-2:1980 Methods for chemical analysis of
rubber -- EDTA titrimetric method for determination of zinc content of
rubber products
PRI/22 confirmed (2011) Reconfirm
BS 7164-11.2:1993 Chemical tests for raw and
vulcanized rubber. Butadiene rubber -- Method for determination
PRI/22 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 64 of 148 January 2016
of unsaturation
BS 903-5:2004 Physical testing of rubber -- Guide
to the application of rubber testing to finite element analysis
PRI/22 confirmed (2011) Reconfirm
BS 903-A18:1973 Physical testing of rubber -- Determination of equilibrium water
vapour absorption
PRI/22 current Withdraw
BS 4370-2:1993 Methods of test for rigid cellular materials -- Methods 7 to 9
PRI/24 partially replaced by BS EN ISO 4590:1995
and BS ISO
1922:2001. Was withdrawn but has
been reinstated
Confirm
BS 2782-1:Method
140D:1997
Methods of testing plastics.
Thermal properties -- Flammability
of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting
(laboratory method)
PRI/26 confirmed (2011) Reconfirm
BS 2782-1:Method 140E:1982
Methods of testing plastics. Thermal properties -- Flammability
of a small, inclined test piece
exposed to an alcohol flame (laboratory method)
PRI/26 confirmed (2011)
BS 7953:1999 Entrance flooring systems.
Selection, installation and maintenance
PRI/3 confirmed (2011) Reconfirm
BS 5325:2001 Installation of textile floor coverings. Code of practice
PRI/3 confirmed (2009) Reconfirm
BS 5808:1991 Specification for underlays for textile floor coverings
PRI/3 partially replaced by BS EN 14499:2004
Confirm
BS 2782-10:Method
1006:1978
Methods of testing plastics. Glass
reinforced plastics -- Determination of volatile matter and resin content
of synthetic resin-impregnated
textile glass fabric
PRI/42 confirmed (2011) Reconfirm
BS 5734-5:1990 Polyester moulding compounds for electrical and other purposes --
Specification for sheet moulding compounds for mechanical
purposes
PRI/42 confirmed (2011) Reconfirm
BS 6882:1987 Guide for storage of raw solid natural and synthetic rubber
PRI/50 confirmed (2011) Reconfirm
BS 5270-1:1989 Bonding agents for use with
gypsum plasters and cement --
Specification for polyvinyl acetate (PVAC) emulsion bonding agents
for indoor use with gypsum building plasters
PRI/52 confirmed (2011) Reconfirm
BS 5350-C7:1990 Methods of test for adhesives.
Adhesively bonded joints: mechanical tests -- Determination
of creep and resistance to sustained application of force
PRI/52 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 65 of 148 January 2016
BS 5350-C1:1986 Methods of test for adhesives.
Adhesively bonded joints: mechanical tests -- Determination
of cleavage strength of adhesive bonds
PRI/52 confirmed (2011) Reconfirm
BS 5350-C15:1990 Methods of test for adhesives.
Adhesively bonded joints: mechanical tests -- Determination
of bond strength in compressive shear
PRI/52 confirmed (2011) Reconfirm
BS 5350-C14:1979 Methods of test for adhesives.
Adhesively bonded joints: mechanical tests -- 90$0D peel test
for a rigid-to-rigid assembly
PRI/52 confirmed (2011) Reconfirm
BS 5350-D4:1976 Methods of test for adhesives.
Adhesively bonded joints:
environmental tests -- Determination of staining potential
PRI/52 confirmed (2011) Reconfirm
BS 5350-G3:1987 Methods of test for adhesives -- Determination of ability of
anaerobic adhesives to set on metal surfaces
PRI/52 confirmed (2011) Reconfirm
BS 5350-C13:1990 Methods of test for adhesives.
Adhesively bonded joints: mechanical tests -- Climbing drum
peel test
PRI/52 confirmed (2011) Reconfirm
BS 5350-E1:1976 Methods of test for adhesives. Sampling and analysis of test data
-- Guide to statistical analysis
PRI/52 confirmed (2011) Reconfirm
BS 5350-A2:1990 Methods of test for adhesives. Adherends -- Guide to the selection
of adherend materials
PRI/52 confirmed (2011) Reconfirm
BS 5350-A1:1976 Methods of test for adhesives.
Adherends -- Adherend preparation
PRI/52 confirmed (2011) Reconfirm
BS 5350-B5:1976 Methods of test for adhesives --
Determination of gelation time
PRI/52 confirmed (2011) Reconfirm
BS 3046:1981 Specification for adhesives for hanging flexible wallcoverings
PRI/52 confirmed (2011) Reconfirm
BS 5350-0:1987 Methods of test for adhesives --
General introduction
PRI/52 confirmed (2011) Reconfirm
BS 6997:1990 Specification for elastomeric
toroidal sealing rings ('O'-rings) manufactured from acrylonitrile-
butadiene rubbers complying with BS 6996
PRI/54 confirmed (2011) Reconfirm
BS 6716:1986 Guide to properties and types of
rubber
PRI/54 confirmed (2011) Reconfirm
BS 7044-4:1991 Artificial sports surfaces -- Specification for surfaces for multi-
sports use
PRI/57 partially replaced by BS EN 14877:2006, BS
EN 14904:2006, BS EN
15330-1:2007 and BS 15330-2
Reconfirm
BS 7874:1998 Method of test for microbiological
deterioration of elastomeric seals for joints in pipework and pipelines
PRI/70 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 66 of 148 January 2016
BS
3379:2005+A1:2011
Combustion modified flexible
polyurethane cellular materials for loadbearing applications.
Specification
PRI/71 current Confirm
BS 4023:1975 Specification for flexible cellular
PVC sheeting
PRI/71 confirmed (2011) Reconfirm
BS 7523:1991 Specification for preformed cellular polyethylene (PE) materials for the
thermal insulation of pipework
PRI/72 confirmed (2011) Reconfirm
BS 4841-5:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for
building end-use applications --
Specification for laminated boards (roofboards) with auto-adhesively
or separately bonded facings for use as thermal insulation boards
for pitched roofs
PRI/72/4 confirmed (2011) Reconfirm
BS 4841-2:2006 Rigid polyisocyanurate (PIR) and
polyurethane (PUR) products for building end-use applications --
Specification for laminated boards with auto-adhesively bonded
facings for use as thermal insulation for internal wall linings
and ceilings
PRI/72/4 confirmed (2011) Reconfirm
BS 2782-3:Method 360C:1991
Methods of testing plastics. Mechanical properties --
Determination of tear resistance of
plastics film and sheeting by the initiation method
PRI/75 confirmed (2011) Reconfirm
BS 2782-1:Method
131B:1983
Methods of testing plastics.
Thermal properties -- Determination of extensibility after
heat ageing of flexible polyvinyl
chloride sheet
PRI/75 confirmed (2011) Reconfirm
BS 2782-1:Method
150C:1983
Methods of testing plastics.
Thermal properties -- Determination of low temperature
extensibility of flexible polyvinyl
chloride sheet
PRI/75 confirmed (2011) Reconfirm
BS 2782-6:Method
643A:1976
Methods of testing plastics.
Dimensional properties --
Shrinkage on heating of film intended for shrink wrapping
applications
PRI/75 confirmed (2011) Reconfirm
BS 2782-8:Method 826A:1992
Methods of testing plastics. Other properties -- Determination of
adhesion of print on plastics sheet
PRI/75 confirmed (2011) Reconfirm
BS 2782-1:Method
150D:1976
Methods of testing plastics.
Thermal properties -- Cold crack
temperature of film and thin sheeting
PRI/75 confirmed (2011) Reconfirm
BS 7344:1990 Specification for reeled low density
polyethylene film for general purpose application
PRI/75 confirmed (2011) Reconfirm
BS 3012:1970 Specification for low and intermediate density polythene
sheet for general purposes
PRI/75 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 67 of 148 January 2016
BS 2919:1968 Specification for low and
intermediate density polythene rod for general purposes
PRI/75 confirmed (2011) Reconfirm
BS 3878:1982 Specification for flexible PVC
sheeting for hospital use
PRI/75 confirmed (2011) Reconfirm
BS 7476:1991 Specification for polyethylene film for covering silage
PRI/75 confirmed (2011) Reconfirm
BS 3757:1978 Specification for rigid PVC sheet PRI/75 confirmed (2011) Reconfirm
BS 4965:1999 Decorative laminated plastics sheet veneered boards and panels
PRI/76 confirmed (2011) Reconfirm
BS 8472:2011 Methods for the assessment of the
oxo-biodegradation of plastics and
of the phyto-toxicity of the residues in controlled laboratory conditions
PRI/82 current Confirm
BS 6564-3:1990 Polytetrafluoroethylene (PTFE) materials and products --
Specification for E glass fibre filled polytetrafluoroethylene
PRI/82 confirmed (2011) Reconfirm
BS 2880:1991 Methods of testing cellulose acetate flake
PRI/82 confirmed (2011) Reconfirm
BS 5255:1989 Specification for thermoplastics
waste pipe and fittings
PRI/88 partially replaced by
BS EN 1329-1:2000,
BS EN 1455-1:2000, BS EN 1519-1:2000,
BS EN 1565-1:2000 and BS EN 1566-
1:2000
Confirm
BS 5392-1:2006 Acrylonitrile-butadiene-styrene
(ABS) fittings for use with ABS pressure pipe -- Specification
PRI/88/2 confirmed (2011) Reconfirm
BS 5391-1:2006 Acrylonitrile-butadiene-styrene
(ABS) pressure pipe -- Specification
PRI/88/2 confirmed (2011)
BS 6076:1996 Specification for polymeric film for use as a protective sleeving for
buried iron pipes and fittings (for
site and factory application)
PSE/10 confirmed (2011) Reconfirm
BS 416-1:1990 Discharge and ventilating pipes and
fittings, sand-cast or spun in cast iron -- Specification for spigot and
socket systems
PSE/10 confirmed (2011) Reconfirm
BS 1560-3.2:1989 Circular flanges for pipes, valves
and fittings (Class designated). Steel, cast iron and copper alloy
flanges -- Specification for cast iron
flanges
PSE/15 confirmed (2011) Reconfirm
BS 3293:1960 Specification for carbon steel pipe
flanges (over 24 inches nominal size) for the petroleum industry
PSE/15 confirmed (2011)
BS 6956-5:1992 Jointing materials and compounds -
- Specification for jointing compounds for use with water, low
pressure saturated steam, 1st
family gases (excluding coal gas) and 2nd family gases
PSE/15/2 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 68 of 148 January 2016
BS 7076-3:1989 Dimensions of gaskets for flanges
to BS 1560 -- Specification for non-metallic envelope gaskets
PSE/15/2 confirmed (2011) Reconfirm
BS 6956-1:1988 Jointing materials and compounds -
- Specification for corrugated metal joint rings
PSE/15/2 confirmed (2011) Reconfirm
BS 7531:2006 Rubber bonded fibre jointing for industrial and aerospace purposes.
Specification
PSE/15/2 confirmed (2011) Reconfirm
BS 3381:1989 Specification for spiral wound gaskets for steel flanges to BS
1560
PSE/15/2 confirmed (2011) Reconfirm
BS 3063:1965 Specification for dimensions of gaskets for pipe flanges
PSE/15/2 confirmed (2011)
BS 7786:2006 Specification for unsintered PTFE
tapes for general use
PSE/15/2 confirmed (2011) Reconfirm
BS 4249:1989 Specification for paper and
cork/paper jointing
PSE/15/2 confirmed (2011) Reconfirm
BS 4371:1991 Specification for fibrous gland packings
PSE/15/2 confirmed (2011) Reconfirm
BS 7775:2005 Penstocks for use in water and
other liquid flow applications.
Specification
PSE/18/3 confirmed (2011) Reconfirm
BS 2000-455:2011 Methods of test for petroleum and
its products -- Determination of the manganese content of gasoline.
Atomic absorption spectrometry
(AAS) method
PTI/13 current Reconfirm
BS 2000-19:2011 Methods of test for petroleum and its products -- Determination of
demulsibility characteristics of lubricating oil (Identical with IP
19/11)
PTI/13 current Reconfirm
BS 2000-306:2011 Methods of test for petroleum and
its products -- Determination of oxidation stability of straight
mineral oil (Identical with IP 306/11)
PTI/13 current Reconfirm
BS 2000-48:2011 Methods of test for petroleum and
its products -- Determination of oxidation characteristics of
lubricating oil (Identical with IP
48/11)
PTI/13 current
BS 2000-10:2011 Methods of test for petroleum and
its products -- Determination of
kerosine burning characteristics 24-hour method
PTI/13 current Confirm
BS 1016-6:1977 Methods for analysis and testing of
coal and coke -- Ultimate analysis
of coal
PTI/16 partially replaced by
Sections and
subsections of BS 1016
Confirm
BS 1016-7:1977 Methods for analysis and testing of
coal and coke -- Ultimate analysis of coke
PTI/16 partially replaced by
Subsections of BS 1016
Confirm
BS 1016-8:1977 Methods for analysis and testing of
coal and coke -- Chlorine in coal and coke
PTI/16 partially replaced by
BS 1016-106.6.1:1997
Confirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 69 of 148 January 2016
BS
2869:2010+A1:2011
Fuel oils for agricultural, domestic
and industrial engines and boilers. Specification
PTI/2 current
BS 1894:1992 Specification for design and
manufacture of electric boilers of welded construction
PVE/2 partially replaced by
BS EN 12953-8:2001
Confirm
BS 341-4:2004 Transportable gas container valves -- Pressure relief devices
PVE/3/1 confirmed (2009) Reconfirm
BS 8562:2011 Gas cylinders. In situ, non-destructive examination and testing
of refillable seamless steel tubes of water capacity between 150 L and
3000 L, used for compressed gases Specification
PVE/3/7 current
BS 8535:2011 Railway applications. Wheelsets
and bogies. Powered and non-powered axles with inboard
bearings. Design method
RAE/3 current Confirm
BS 845-2:1987 Methods for assessing thermal
performance of boilers for steam,
hot water and high temperature heat transfer fluids. --
Comprehensive procedure
RHE/10 confirmed (2011) Reconfirm
BS 845-1:1987 Methods for assessing thermal performance of boilers for steam,
hot water and high temperature
heat transfer fluids -- Concise procedure
RHE/10 confirmed (2011) Reconfirm
BS 779:1989 Specification for cast iron boilers for central heating and indirect hot
water supply (rated output 44 kW
and above)
RHE/10 partially replaced by BS EN 303-1:1999 and
BS EN 303-4:1999
Confirm
BS 7190:1989 Method for assessing thermal
performance of low temperature hot water boilers using a test rig
RHE/10 confirmed (2011) Reconfirm
BS 853-2:1996 Specification for vessels for use in
heating systems -- Tubular heat exchangers and storage vessels for
building and industrial services
RHE/12 confirmed (2011) Reconfirm
BS 853-
1:1990+A3:2011
Specification for vessels for use in
heating systems -- Calorifiers and storage vessels for central heating
and hot water supply
RHE/12 current Confirm
BS 7478:1991 Guide to selection and use of
thermostatic radiator valves
RHE/16 confirmed (2011) Reconfirm
BS 4376:1982 Specification for electrically
operated blood storage refrigerators
RHE/19 partially replaced by
BS 4376-1:1991
Confirm
BS 5429:1976 Code of practice for safe operation of small-scale storage facilities for
cryogenic liquids
RHE/21 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 70 of 148 January 2016
BS 8303-2:1994 Installation of domestic heating
and cooking appliances burning solid mineral fuels -- Installation of
domestic heating and cooking appliances buring solid mineral
fuels. Specification for installing
and commissioning on site
RHE/28 confirmed (2011) Reconfirm
BS 8303-3:1994 Installation of domestic heating
and cooking appliances burning solid mineral fuels --
Recommendations for design and on site installation
RHE/28 confirmed (2011) Reconfirm
BS 1846-1:1994 Glossary of terms relating to solid
fuel burning equipment -- Domestic appliances
RHE/28 confirmed (2011) Reconfirm
BS 5643:1984 Glossary of refrigeration, heating,
ventilating and air-conditioning terms
RHE/6 confirmed (2011) Reconfirm
BS 31100:2011 Risk management. Code of practice and guidance for the
implementation of BS ISO 31000
RM/1 current
BS 1902-3.11:1983 Methods of testing refractory materials. General and textural
properties -- Measurement of
dimensions and shape of refractory bricks and blocks (methods 1902-
311)
RPI/1 confirmed (2011) Reconfirm
BS 1902-3.17:1990 Methods of testing refractory
materials. General and textural
properties -- Determination of volume and bulk density of dense
shaped products (methods 1902-317)
RPI/1 confirmed (2011) Reconfirm
BS 1902-3.2:1981 Methods of testing refractory
materials. General and textural properties -- Measurement of
dimensions of specimens for
testing (methods 1902-302)
RPI/1 confirmed (2011) Reconfirm
BS 1902-3.16:1990 Methods of testing refractory materials. General and textural
properties -- Determination of pore size distribution (method 1902-
316)
RPI/1 confirmed (2011) Reconfirm
BS 3446-2:1990 Glossary of terms associated with refractory materials -- Applications
in the coke, glass, cement and other non-metallurgical industries
RPI/1 confirmed (2011) Reconfirm
BS 1902-3.14:1996 Methods of testing refractory materials. General and textural
properties -- Determination of
hydration tendency
RPI/1 confirmed (2011) Reconfirm
BS 1902-3.3:1981 Methods of testing refractory
materials. General and textural properties -- Sieve analysis
(methods 1902-303)
RPI/1 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 71 of 148 January 2016
BS 3446-3:1990 Glossary of terms associated with
refractory materials -- Applications in the metallurgical industries
RPI/1 confirmed (2011) Reconfirm
BS 6434:1984 Guide to the use of BS 6065
'Methods for sampling and acceptance testing of shaped
refractory products'
RPI/1 confirmed (2011) Reconfirm
BS 1902-3.1:1981 Methods of testing refractory
materials. General and textural
properties -- Guidance on sampling
RPI/1 confirmed (2011) Reconfirm
BS 1902-3.0:1988 Methods of testing refractory
materials. General and textural
properties -- Introduction
RPI/1 confirmed (2011) Reconfirm
BS 3056-2:1985 Sizes of refractory bricks --
Specification for bricks for use in glass-melting furnaces
RPI/1 confirmed (2011) Reconfirm
BS 4207:1989 Code of practice for the installation
of monolithic linings for steel chimneys and flues
RPI/1 confirmed (2011) Reconfirm
BS 3446-1:1990 Glossary of terms associated with
refractory materials -- General and manufacturing
RPI/1 confirmed (2011) Reconfirm
BS 3056-3:1986 Sizes of refractory bricks --
Specification for bricks for rotary cement kilns
RPI/1 confirmed (2011) Reconfirm
BS 3056-7:1992 Sizes of refractory bricks --
Specification for basic bricks for steel making
RPI/1 confirmed (2011) Reconfirm
BS 3056-1:1985 Sizes of refractory bricks -- Specification for multi-purpose
bricks
RPI/1 confirmed (2011) Reconfirm
BS 6886:1987 Specification for alumino-silicate refractories for use in coke ovens
RPI/1 confirmed (2011) Reconfirm
BS 3056-8:1987 Sizes of refractory bricks --
Specification for bricks for ladles
RPI/1 confirmed (2011) Reconfirm
BS 4966:1991 Specification for silica refractories
for use in coke ovens
RPI/1 confirmed (2011) Reconfirm
BS 8904:2011 Guidance for community sustainable development
SDS/1/4 current Confirm
BS 8909:2011 Specification for a sustainability
management system for film
SDS/1/7 current Confirm
BS MA 18:1973 Specification for salt water piping
systems in ships
SME/32 confirmed (2011) Reconfirm
BS MA 78:1978 Specification for aluminium shore gangways
SME/32 confirmed (2011) Reconfirm
BS 6002-3:2005 Sampling procedures for inspection
by variables -- Guide to double
sampling schemes indexed by acceptance quality limit (AQL) for
lot-by-lot inspection
SS/5 confirmed (2011) Reconfirm
BS 6000-1:2005 Guide to the selection and usage of acceptance sampling systems for
inspection of discrete items in lots -
- General guide to acceptance sampling
SS/5 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 72 of 148 January 2016
BS 6000-2:2005 Guide to the selection and usage of
acceptance sampling systems for inspection of discrete items in lots -
- Guide to sampling by attributes
SS/5 confirmed (2011) Reconfirm
BS 6000-3:2005 Guide to the selection and usage of
acceptance sampling systems for inspection of discrete items in lots -
- Guide to sampling by variables
SS/5 confirmed (2011) Reconfirm
BS 282; 389:1963 Specifications for lead chromes and
zinc chromes for paints
STI/1 confirmed (2011) Reconfirm
BS 388:1972 Specification for aluminium
pigments
STI/1 confirmed (2011) Reconfirm
BS 3900-F6:1976 Methods of test for paint. Durability
tests on paint films -- Notes for
guidance on the conduct of natural weathering test
STI/10 confirmed (2011) Reconfirm
BS 4800:2011 Schedule of paint colours for building purposes
STI/14 current Confirm
BS 4800F:2011 BS 4800 Colour matching fan STI/14 current Confirm
BS 6496:1984 Specification for powder organic coatings for application and stoving
to aluminium alloy extrusions, sheet and preformed sections for
external architectural purposes,
and for the finish on aluminium alloy extrusions, sheet and
preformed sections coated with powder organic coatings
STI/21 confirmed (2011)
BS 245:1976 Specification for mineral solvents
(white spirit and related hydrocarbon solvents) for paints
and other purposes
STI/3 confirmed (2011) Reconfirm
BS 3761:1995 Specification for solvent-based
paint remover
STI/3 confirmed (2011) Reconfirm
BS 3279:1960 Specification for seedlac STI/3 confirmed (2011) Reconfirm
BS 3745:1970 Method for the evaluation of
results of accelerated corrosion tests on metallic coatings
STI/33 confirmed (2011) Reconfirm
BS 4921:1988 Specification for sherardized
coatings on iron or steel
STI/33 confirmed (2011) Reconfirm
BS 3831:1964 Specification for vitreous enamel finishes for domestic and catering
appliances
STI/36 confirmed (2011)
BS 4900:1976 Specification for vitreous enamel colours for building purposes
STI/36 confirmed (2011)
BS 4950:1973 Specification for sprayed and fused
metal coatings for engineering
purposes
STI/40 confirmed (2011) Reconfirm
BS 4761:1971 Specification for sprayed unfused
metal coatings for engineering
purposes
STI/40 confirmed (2011) Reconfirm
BS 4495:1969 Recommendations for the flame
spraying of ceramic and cermet coatings
STI/40 confirmed (2011) Reconfirm
BS 11000-2:2011 Collaborative business relationships
-- Guide to implementing BS 11000-1
SVS/1/4 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 73 of 148 January 2016
BS 8453:2011 Compliance framework for
regulated financial services firms. Specification
SVS/6/2 current Confirm
BS 8564:2011 Furniture removal activities.
Overseas moving services. Specification
SVS/7/2 current Confirm
BS 8877:2011 Online recruitment. Code of practice
SVS/9 current Confirm
BS 1892-3:2003 Gymnasium equipment -- Sports
mats. Specification for fire safety requirements for mats, mattresses
and landing areas
SW/136/22 confirmed (2011) Reconfirm
BS 1892-2.9:1986 Gymnasium equipment. Particular
requirements -- Specification for
weight training equipment
SW/136/22 confirmed (2011) Reconfirm
BS 1892-2.6:1986 Gymnasium equipment. Particular
requirements -- Specification for boxing rings
SW/136/22 confirmed (2011) Reconfirm
BS 4745:2005 Determination of the thermal
resistance of textiles. Two-plate method: fixed pressure procedure,
two-plate plate method: fixed
opening procedure, and single-plate method
TCI/24 confirmed (2011) Reconfirm
BS 947:1970 Specification for a universal system for designating linear density of
textiles (Tex system)
TCI/24 confirmed (2011) Withdraw
BS 7141-2:1991 Narrow fabrics -- Specification for cotton webbings for personal load
carrying purposes
TCI/24 confirmed (2011)
BS 7141-1:1991 Narrow fabrics -- Specification for polyamide and polyolefin woven
tapes and webbings
TCI/24 confirmed (2011) Reconfirm
BS 7141-4:1990 Narrow fabrics -- Specification for woven elastic webbings containing
natural rubber
TCI/24 confirmed (2011) Reconfirm
BS 1625-6 and 4830:1972
Specifications for woven cotton tapes, light, medium and heavy
qualities
TCI/24 confirmed (2011)
BS 7141-5:1990 Narrow fabrics -- Specification for
elastic flat braids containing natural
rubber
TCI/24 confirmed (2011) Reconfirm
BS 984:1990 Method for determination of net
mass of retail packages of knitting
and rug yarns
TCI/24 confirmed (2011) Reconfirm
BS 7318:1990 Specification for industrial sewing
threads made from linen (flax) or cotton
TCI/24 confirmed (2011)
BS 4134:1990 Method for designation of ticket
numbers of industrial sewing threads
TCI/24 confirmed (2011) Reconfirm
BS 7141-7:1991 Narrow fabrics -- Specification for
woven cotton tapes and webbings
TCI/24 confirmed (2011)
BS 1664-8:1974 Specifications for woven cotton webbings of five qualities
TCI/24 confirmed (2011)
BS 7144:1989 Specification for flax and jute
fabrics for industrial use
TCI/24 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 74 of 148 January 2016
BS 7141-3:1990 Narrow fabrics -- Specification for
wool tapes
TCI/24 confirmed (2011)
BS 7200:1989 Specification for synthetic-fibre needlefelts
TCI/24 confirmed (2011) Reconfirm
BS 6131:1982 Glossary of terms relating to
household sewing machines
TCI/33 confirmed (2011) Reconfirm
BS 7033-2:1989 Cleaning and polishing cloths --
Specification for industrial wipers from reclaimed materials, and
waste yarn for cleaning and lubricating purposes
TCI/66 confirmed (2011)
BS 7033-3:1989 Cleaning and polishing cloths --
Specification for floorcloths and
dishcloths
TCI/66 confirmed (2011)
BS 8466:2006 Hats. Protection against solar UVR.
Method of test and performance
requirements
TCI/66 current
BS 7033-5:1990 Cleaning and polishing cloths --
Specification for general polishing cloths
TCI/66 confirmed (2011)
BS 7033-4:1990 Cleaning and polishing cloths --
Specification for window cleaning cloths
TCI/66 confirmed (2011)
BS 5815-1:2005 Sheets, sheeting, pillowslips,
towels, napkins, counterpanes and continental quilt secondary covers
suitable for use in the public sector -- Specification for sheeting, sheets
and pillowslips
TCI/66/1 confirmed (2011) Reconfirm
BS 5335-2:2006 Continental quilts -- Determination of thermal resistance for quilts
filled with feather and/or down
TCI/66/1 confirmed (2011) Reconfirm
BS 5131-6.2:1979 Methods of test for footwear and footwear materials. Codes of
practice -- Code of practice for the identification in footwear wear
trials of major weaknesses in
design or construction and the assessment of fitness-for-purpose
TCI/69 confirmed (2011) Reconfirm
BS 5131-1.3:1991 Methods of test for footwear and footwear materials. Adhesives --
Preparation of test assemblies using adhesives (other than hot
melt adhesives) for heat resistance
(creep) and peel tests
TCI/69 confirmed (2011) Reconfirm
BS 5131-6.1:1981 Methods of test for footwear and
footwear materials. Codes of practice -- Code of practice for the
comparative evaluation by wear
trial of materials, components or constructions
TCI/69 confirmed (2011) Reconfirm
BS 5131-1.6:1979 Methods of test for footwear and
footwear materials. Adhesives -- Recommended environmental
storage conditions for adhesive joints prior to heat resistance or
peeling tests
TCI/69 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 75 of 148 January 2016
BS 5131-3.1:1991 Methods of test for footwear and
footwear materials. Uppers, textiles and threads -- Strength of upper
materials and lining materials at right angles to stitch perforations
TCI/69 confirmed (2011) Reconfirm
BS 5131-1.7:1991 Methods of test for footwear and
footwear materials. Adhesives --
Preparation of test assemblies using hot melt adhesives for heat
resistance (creep) and peel tests
TCI/69 confirmed (2011) Reconfirm
BS 5131-5.13:1980 Methods of test for footwear and footwear materials. Testing of
complete footwear -- Measurement
of the strength of stitched seams in upper and lining materials
TCI/69 confirmed (2011) Reconfirm
BS 3424-14:1985 Testing coated fabrics -- Method
16. Methods for determination of colour fastness to wet and dry
rubbing and determination of
resistance to printwear
TCI/69 confirmed (2011)
BS 5131-5.11:1981 Methods of test for footwear and footwear materials. Testing of
complete footwear -- Determination of the strength of
buckle fastening assemblies
TCI/69 confirmed (2011) Reconfirm
BS 5131-1.8:1981 Methods of test for footwear and
footwear materials. Adhesives -- Rate of bond strength development
in shear of hot melt adhesives for lasting
TCI/69 confirmed (2011) Reconfirm
BS 3424-22:1983 Testing coated fabrics -- Method 25. Methods for determination of
fusion of PVC coatings and the state of cure of vulcanized rubber
coatings
TCI/69 confirmed (2011)
BS 5131-2.7:1980 Methods of test for footwear and footwear materials. Solings -- The
preparation of test pieces from soling materials for physical testing
TCI/69 confirmed (2011) Reconfirm
BS 3424-26:1990 Testing coated fabrics -- Methods 29A, 29B, 29C and 29D. Methods
for determination of resistance to
water penetration and surface wetting
TCI/69 confirmed (2011) Reconfirm
BS 5131-5.2:1990 Methods of test for footwear and footwear materials. Testing of
complete footwear -- Degree of
vulcanization of moulded-on rubber soles
TCI/69 confirmed (2011) Reconfirm
BS 5131-5.9:1979 Methods of test for footwear and
footwear materials. Testing of complete footwear -- Strength of
top piece attachment to shoe heels
TCI/69 confirmed (2011) Reconfirm
BS 5131-5.7:1978 Methods of test for footwear and
footwear materials. Testing of
complete footwear -- Fatigue test for rigid units and shoe bottoms
TCI/69 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 76 of 148 January 2016
BS 5131-2.1:1991 Methods of test for footwear and
footwear materials. Solings -- Ross flexing method for cut growth
resistance of soling materials
TCI/69 confirmed (2011) Reconfirm
BS 5131-5.6:1991 Methods of test for footwear and
footwear materials. Testing of complete footwear -- Impact test
for rigid units and shoe bottoms
TCI/69 confirmed (2011) Reconfirm
BS 3424-36:1993 Testing coated fabrics -- Method
39. Method for determination of
the dimensional stability of coated fabrics to domestic washing
TCI/69 confirmed (2011)
BS 5131-2.11:1983 Methods of test for footwear and footwear materials. Solings --
Resistance of solings to short-term contact with a hot surface
TCI/69 confirmed (2011) Reconfirm
BS 5131-4.8:1990 Methods of test for footwear and footwear materials. Other
components -- Resistance of heels of ladies' shoes to lateral impact
TCI/69 confirmed (2011) Reconfirm
BS 5131-3.4:1978 Methods of test for footwear and footwear materials. Uppers, textiles
and threads -- Edgewise
compressibility, upper materials
TCI/69 confirmed (2011) Reconfirm
BS 5131-5.1:1990 Methods of test for footwear and
footwear materials. Testing of complete footwear -- Adhesion of
stuck-on and moulded-on soles
TCI/69 confirmed (2011) Reconfirm
BS 3424-20:1987 Testing coated fabrics -- Method
23. Method for determination of dimensional changes on
mechanical relaxation at zero
tension
TCI/69 confirmed (2011)
BS 5131-5.3:1990 Methods of test for footwear and
footwear materials. Testing of complete footwear -- Resistance of
complete footwear to heat
TCI/69 confirmed (2011) Reconfirm
BS 3144:Addendum
No. 1:1981
Sampling and physical testing of
leather -- Determination of
resistance to bending and abrasion of heavy leather
TCI/69 confirmed (2011) Reconfirm
BS 3424-25:1993 Testing coated fabrics -- Method 28. Method for determination of
the coating thickness and thickness of any expanded layer
TCI/69 confirmed (2011)
BS 5131-4.7:1975 Methods of test for footwear and footwear materials. Other
components -- Resistance to
peeling of ribs stuck to insoles
TCI/69 confirmed (2011) Reconfirm
BS 5131-3.6:1991 Methods of test for footwear and
footwear materials. Uppers, textiles and threads -- Abrasion resistance
of shoe laces
TCI/69 confirmed (2011) Reconfirm
BS 3424-18:1986 Testing coated fabrics -- Methods
21A and 21B. Methods for determination of resistance to
wicking and lateral leakage
TCI/69 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 77 of 148 January 2016
BS 5131-1.1:1991 Methods of test for footwear and
footwear materials. Adhesives -- Resistance of adhesive joints to
heat (creep test)
TCI/69 confirmed (2011) Reconfirm
BS 5131-3.7:1991 Methods of test for footwear and
footwear materials. Uppers, textiles and threads -- Breaking strength of
shoe laces
TCI/69 confirmed (2011) Reconfirm
BS 5131-1.9:1985 Methods of test for footwear and
footwear materials. Adhesives --
Measurement of green strength of adhesive joints
TCI/69 confirmed (2011) Reconfirm
BS 5131-4.6:1975 Methods of test for footwear and footwear materials. Other
components -- Shear strength of ribs stuck to insoles
TCI/69 confirmed (2011) Reconfirm
BS 5131-5.4:1978 Methods of test for footwear and footwear materials. Testing of
complete footwear -- Sole bond peeling strength
TCI/69 confirmed (2011) Reconfirm
BS 5131-4.1:1975 Methods of test for footwear and footwear materials. Other
components -- Resistance to
peeling of insole board
TCI/69 confirmed (2011) Reconfirm
BS 5131-3.5:1978 Methods of test for footwear and
footwear materials. Uppers, textiles and threads -- The break/pipiness
test
TCI/69 confirmed (2011) Reconfirm
BS 5131-1.2:1991 Methods of test for footwear and
footwear materials. Adhesives -- Resistance of adhesive joints to
peeling
TCI/69 confirmed (2011) Reconfirm
BS 3424-17:1987 Testing coated fabrics -- Method
20. Method for determination of
dimensional stability to water immersion
TCI/69 confirmed (2011) Reconfirm
BS 5131-4.5:1990 Methods of test for footwear and footwear materials. Other
components -- Tensile strength of fibreboard
TCI/69 confirmed (2011)
BS 3424-34:1992 Testing coated fabrics -- Method 37. Method for determination of
water vapour permeability index (WVPI)
TCI/69 confirmed (2011) Reconfirm
BS 7269-1:1991 Drycleanability of leather garments
-- Specification for drycleanability and for appropriate care labels
TCI/69 confirmed (2011)
BS 5131-4.2:1990 Methods of test for footwear and
footwear materials. Other components -- Flexing index of
fibreboard
TCI/69 confirmed (2011) Reconfirm
BS 3424-31:1990 Testing coated fabrics -- Method
34. Method for determination of resistance to scuffing and snagging
TCI/69 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 78 of 148 January 2016
BS 3424-13:1999 Testing coated fabrics -- Guide to
the selection of methods for colour fastness to light testing
TCI/69 confirmed (2011)
BS 3424-24:1990 Testing coated fabrics -- Methods
27A and 27B. Methods for determination of abrasion
resistance
TCI/69 confirmed (2011)
BS 3144:Addendum
No. 2:1981
Sampling and physical testing of
leather -- Measurement of water
vapour absorption
TCI/69 confirmed (2011) Reconfirm
BS 3424-21:1993 Testing coated fabrics -- Method
24. Method for determination of
elongation and tension set
TCI/69 confirmed (2011)
BS 3424-19:1989 Testing coated fabrics -- Methods
22A, 22B and 22C. Determination of sulphur staining
TCI/69 confirmed (2011)
BS 3546:2001 Coated fabrics for use in the
manufacture of water penetration resistant clothing
TCI/69 confirmed (2011)
BS 3424-10:1987 Testing coated fabrics -- Methods
12A and 12B Determination of surface drag
TCI/69 confirmed (2011) Reconfirm
BS 5131-0:1990 Methods of test for footwear and
footwear materials -- General introduction
TCI/69 confirmed (2011) Reconfirm
BS 7269-2:1991 Drycleanability of leather garments
-- Method for assessing drycleanability
TCI/69 confirmed (2011)
BS 7141-6:1989 Narrow fabrics -- Specification for laces for footwear and other
purposes
TCI/69 confirmed (2011) Reconfirm
BS 3424-16:1995 Testing coated fabrics -- Method 18. Determination of air
permeability
TCI/69 confirmed (2011) Reconfirm
BS 3424-28:1995 Testing coated fabrics -- Method 31. Determination of specular gloss
TCI/69 confirmed (2011)
BS 5455:1977 Specification for polyurethane
coated nylon fabric for mattress
covers
TCI/69 confirmed (2011)
BS 3424-38:1998 Testing coated fabrics --
Determination of wounded burst strength
TCI/69 confirmed (2011) Reconfirm
BS 3935:1991 Guide to classification and marking
of cattle hides and calfskins
TCI/69 confirmed (2011) Reconfirm
BS 4981:1984 Specification for Mondopoint footwear sizing and marking
system
TCI/69 confirmed (2011)
BS 6453:1984 Specification for performance of leathers for garments
TCI/69 confirmed (2011)
BS 7451:1991 Specification for archival quality
bookbinding leather
TCI/69 confirmed (2011) Reconfirm
BS 2797:1976 Specification for leathers for gas
meter diaphragms
TCI/69 confirmed (2011) Reconfirm
BS 3424-0:2000 Testing coated fabrics -- Index of parts
TCI/69 confirmed (2011) Reconfirm
BS 6715:1991 Specification for chamois leather TCI/69 confirmed (2011) Reconfirm
BS 5833:1988 Scheme for labelling of footwear TCI/69 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 79 of 148 January 2016
BS 4674:1971 Methods for the determination of
the breaking load and knot breaking load of netting yarns for
fishing nets
TCI/77 confirmed (2011) Reconfirm
BS 3367:1999 Specification for ropes and lines for fire service use other than for rope
rescue purposes
TCI/77 confirmed (2011) Reconfirm
BS 4406:1969 Specification for the designation in
the Tex system of netting yarns for
fishing nets
TCI/77 confirmed (2011) Reconfirm
BS 1214:1977 Specification for hessian sandbags
and rot-proofed hessian sandbags
TCI/77 confirmed (2011) Reconfirm
BS 5398:1976 Classification of methods for
mounting and joining of fishing nets
TCI/77 confirmed (2011) Reconfirm
BS 3566:1982 Specification for lightweight
salvage sheets for fire service use
TCI/77 confirmed (2011) Reconfirm
BS 1103:1989 Specification for fabrics for the reinforcement of rubber hoses
TCI/77 confirmed (2011) Reconfirm
BS 7648:1993 Specification for double braided
ropes made from man-made fibre
TCI/77 confirmed (2011) Reconfirm
BS 5127:1974 Specification for polyolefin webbing
for divans and bed bases
TCI/77 confirmed (2011) Reconfirm
BS 4881:1993 Specification for polypropylene film cords, lines and twines
TCI/77 confirmed (2011) Reconfirm
BS 3104:1970 Specification for polyamide (nylon)
mountaineering ropes
TCI/77 confirmed (2011) Reconfirm
BS 4763:1971 Methods for cutting knotted netting
to shape (tapering)
TCI/77 confirmed (2011) Reconfirm
BS 525:1991 Specification for fibre cores for wire ropes
TCI/77 confirmed (2011) Reconfirm
BS 6170:1981 Specification for flax canvas water
buckets
TCI/77 confirmed (2011) Reconfirm
BS 6894:1987 Specification for jute hessian
tubing
TCI/77 confirmed (2011) Reconfirm
BS 3408:1992 Specification for tarpaulins TCI/77 confirmed (2011) Reconfirm
BS 6810-2:2005 Determination of metals in textiles -- Analysis by atomic emission
spectroscopy
TCI/80 confirmed (2011)
BS 8459:2005 Determination of extractable matter in textiles. Method
TCI/80 confirmed (2011) Reconfirm
BS 4407:1988 Methods for quantitative analysis of
fibre mixtures
TCI/80 replaced by Parts of
BS EN ISO 1833
BS
1006:B01C:LFS1:1982
Methods of test for colour fastness
of textiles and leather. Blue wool standards -- Reference standard
for no. 1
TCI/81 confirmed (2011) Reconfirm
BS
1006:B01C:LFS2:1985
Methods of test for colour fastness
of textiles and leather. Blue wool standards -- Reference standard
for no. 2
TCI/81 confirmed (2011) Reconfirm
BS
1006:B01C:LFS3:1989
Methods of test for colour fastness
of textiles and leather. Blue wool standards -- Reference standard
for no. 3
TCI/81 confirmed (2011) Withdraw
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 80 of 148 January 2016
BS
1006:B01C:LFS4:1990
Methods of test for colour fastness
of textiles and leather. Blue wool standards -- Reference standard
for no. 4
TCI/81 confirmed (2011) Reconfirm
BS
1006:B01C:LFS5:1988
Methods of test for colour fastness
of textiles and leather. Blue wool standards -- Reference standard
for no. 5
TCI/81 confirmed (2011) Reconfirm
BS
1006:B01C:LFS6:1988
Methods of test for colour fastness
of textiles and leather. Blue wool
standards -- Reference standard for no. 6
TCI/81 confirmed (2011) Reconfirm
BS 1006:B01C:LFS7:1985
Methods of test for colour fastness of textiles and leather. Blue wool
standards -- Reference standard for no. 7
TCI/81 confirmed (2011) Reconfirm
BS 1006:B01C:LFS8:1987
Methods of test for colour fastness of textiles and leather. Blue wool
standards -- Reference standard for no. 8
TCI/81 confirmed (2011) Reconfirm
BS 6923:1988 Method for calculation of small colour differences
TCI/81 confirmed (2011) Reconfirm
BS 6246-5:1991 Industrial laundry machinery -- Methods for the assessment of the
effect of shaped garment finishing machinery on textiles
TCI/82 confirmed (2011) Reconfirm
BS 7305:1990 Method for determination of the maximum safe ironing temperature
of fabrics
TCI/82 confirmed (2011) Reconfirm
BS 5742:1989 Specification for textile labels requiring to be washed and/or dry
cleaned
TCI/82 confirmed (2011) Reconfirm
BS 7940:1999 Analogue PSTN terminal support interface
TCT/2 confirmed (2011) Reconfirm
BS 3730-2:1982 Assessment of departures from
roundness -- Specification for characteristics of stylus instruments
for measuring variations in radius
(including guidance on use and calibration)
TDW/4 current Confirm
BS 1646-3:1984 Symbolic representation for process measurement control
functions and instrumentation --
Specification for detailed symbols for instrument interconnection
diagrams
TDW/4 confirmed (2011) Reconfirm
BS 1646-2:1983 Symbolic representation for process measurement control
functions and instrumentation -- Specification for additional basic
requirements
TDW/4 confirmed (2011)
BS 959:2008 Specification for internal micrometers (including stick
micrometers)
TDW/4 current Confirm
BS 969:2008 Specification for limits and tolerances on plain limit gauges
TDW/4 partially replaced by BS EN ISO 1938-
1:2015
Confirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 81 of 148 January 2016
BS 887:2008 Precision vernier callipers.
Requirements and test methods
TDW/4 partially replaced by
BS EN ISO 13385-1:2011
Confirm
BS 907:2008 Specification for dial gauges for
linear measurement
TDW/4 partially replaced by
BS EN ISO 463:2006
Confirm
BS 3777:1964 Specification for screw thread measuring cylinders
TDW/4 replaced by BS 5590:1978
Confirm
BS 1643:2008 Specification for precision vernier
height gauges
TDW/4 partially replaced by
BS EN ISO 13225:2012
Confirm
BS 6365:2008 Specification for precision vernier
depth gauges
TDW/4 partially replaced by
BS EN ISO 13385-2:2011
Confirm
BS 870:2008 Specification for external micrometers
TDW/4 partially replaced by BS EN ISO 3611:2010
Confirm
BS 2795:1981 Specification for dial test indicators (lever type) for linear measurement
TDW/4/4 replaced by BS EN ISO 9493:2010 and has
been declared obsolescent
Confirm
PD 68888:2011 Objectives and learning outcomes for BS 8888 training
TDW/4/6 current
BS 7373-2:2001 Product specifications -- Guide to
identifying criteria for a product
specification and to declaring product conformity
TDW/4/7 confirmed (2011) Reconfirm
BS 8887-240:2011 Design for manufacture, assembly, disassembly and end-of-life
processing (MADE) -- Reconditioning
TDW/4/7 current Confirm
BS 7373-3:2005 Product specifications -- Guide to
identifying criteria for specifying a service offering
TDW/4/7 confirmed (2011) Reconfirm
BS 7373-1:2001 Guide to the preparation of
specifications -- Guide to preparation
TDW/4/7 confirmed (2011) Reconfirm
BS 3300:1974 Specification for kerosine (paraffin) unflued space heaters, cooking and
boiling appliances for domestic use
W/- confirmed (2011) Withdraw
BS 3300:1985 Specification for paraffin unflued space heating and cooking
appliances for domestic use
W/- confirmed (2011) Withdraw
BS 2049:1985 Specification for paraffin lighting appliances for domestic use
W/- confirmed (2011) Withdraw
BS 4570:1985 Specification for fusion welding of
steel castings
WEE/-/1 partially replaced by
BS EN 1011-8:2004
Confirm
BS 7363:1990 Method for bead-on-plate (BOP)
test for welds
WEE/2 confirmed (2009) Reconfirm
BS 4677:1984 Specification for arc welding of austenitic stainless steel pipework
for carrying fluids
WEE/21 confirmed (2011) Reconfirm
BS 6990:1989 Code of practice for welding on steel pipes containing process
fluids or their residuals
WEE/21 confirmed (2011) Reconfirm
BS 2633:1987 Specification for Class I arc welding of ferritic steel pipework for
carrying fluids
WEE/21 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 82 of 148 January 2016
BS 2971:1991 Specification for class II arc
welding of carbon steel pipework for carrying fluids
WEE/21 confirmed (2011) Reconfirm
BS 4515-2:1999 Specification for welding of steel
pipelines on land and offshore -- Duplex stainless steel pipelines
WEE/21/7 confirmed (2011) Reconfirm
BS 7670-2:1997 Steel nuts and bolts for resistance projection welding -- Specification
for welding of weld nuts and weld
bolts
WEE/29 confirmed (2011) Reconfirm
BS 4871-3:1985 Specification for approval testing of
welders working to approved
welding procedures -- Arc welding of tube to tube-plate joints in
metallic materials
WEE/36 confirmed (2011)
BS 9690-2:2011 Non-destructive testing. Guided
wave testing -- Basic requirements
for guided wave testing of pipes, pipelines and structural tubulars
WEE/46 current Confirm
BS 9690-1:2011 Non-destructive testing. Guided wave testing -- General guidance
and principles
WEE/46 current Confirm
BS 2737:1956 Terminology of internal defects in castings as revealed by
radiography
WEE/46 confirmed (2011) Reconfirm
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 83 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 3G 100-
2.3.6:1972
Specification for general requirements for
equipment for use in aircraft. All equipment. Environmental conditions -- Acceleration
requirements
ACE/58 confirmed (2011)
BS 3G 100-2.3.12:1991
Specification for general requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Fluid
contamination
ACE/58 confirmed (2011)
BS 3G 100-
2.3.14:1973
Specification for general requirements for
equipment for use in aircraft. All equipment. Environmental conditions -- Acoustic
vibration
ACE/58 confirmed (2011)
BS 3G 100-2.3.5:1972
Specification for general requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Explosion-
proofness
ACE/58 confirmed (2011)
BS 3G 100-
2.3.7:1972
Specification for general requirements for
equipment for use in aircraft. All equipment. Environmental conditions -- Tropical
exposure
ACE/58 confirmed (2011)
BS 3G 100-2.3.11:1973
Specification for general requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Water-proofness
ACE/58 confirmed (2011)
BS 3G 100-2.3.10:1974
Specification for general requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Impact icing
ACE/58 confirmed (2011)
BS 3G 100-2.3.9:1972
Specification for general requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Ice formation
ACE/58 confirmed (2011)
BS 3G 100-2.3.3:1972
Specification for general requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Mould growth
ACE/58 confirmed (2011)
BS 3G 100-2.3.1:1969
Specification for general requirements for equipment for use in aircraft. All equipment.
Environmental conditions -- Vibration
ACE/58 confirmed (2011)
BS 3G 100-
2.3.8:1972
Specification for general requirements for
equipment for use in aircraft. All equipment.
Environmental conditions -- Salt mist
ACE/58 confirmed (2011)
BS 3G 100-2.2:1972 Specification for general requirements for
equipment for use in aircraft. All equipment -
- Magnetic influence
ACE/58 confirmed (2011)
BS G 246:1991 Specification for cable ties for installation
under controlled tension on aircraft electric cable harnesses
ACE/6 partially replaced
by parts of BS EN 4056 & BS EN
4057
BS G 194:1965 Specification for lever-operated manual switches for aircraft
ACE/6 replaced by BS G 224:1978
BS G 200:1967 Specification for miniature lever-operated
manual switches
ACE/6 replaced by BS G
224:1978
BS G 154:1958 Screws with captive washers for aircraft ACE/6 partially replaced
by BS G 203:1967
BS G 264:2005 Specification for avionic data transmission interface systems. Utilities bus
ACE/6/-/9 confirmed (2011)
BS 5L 101:2011 Procedure for inspection, testing and
acceptance of aluminium-base and magnesium-base ingots and castings
ACE/61 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 84 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 3L 500:2011 Procedure for inspection, testing and
acceptance of wrought magnesium base alloys
ACE/61 current
BS 2S
201:2004+A1:2011
Carbon steel wire rod, patented cold drawn
carbon steel wire and springs. High duty unground wire. Specification
ACE/61/-
/15
current
BS 2S
202:2004+A1:2011
Carbon steel wire rod, patented cold drawn
carbon steel wire and springs. High duty ground wire. Specification
ACE/61/-
/15
current
BS 3B 27:2009 Specification for copper-zinc-aluminium-
nickel-silicon alloy tube
ACE/61/-
/16
current
BS 7L 37:1989 Specification for wire for solid cold-forged
rivets of aluminium-copper-magnesium-
silicon-manganese alloy (for use in the solution treated and naturally aged condition)
(not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)
ACE/61/-
/24
confirmed (2011)
BS L 102:1971 Specification for bars and extruded sections
of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged
at room temperature) (not exceeding 200 mm diameter or minor sectional dimension)
(Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
ACE/61/-
/24
replaced by BS EN
2100:1992
BS L 119:1975 Specification for ingots and castings of aluminium-copper-nickel-manganese-
titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu
5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2,
Sb 0.2)
ACE/61/-/24
confirmed (2011)
BS L 117:1975 Specification for tube of aluminium-
magnesium-silicon-copper-chromium alloy
(solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm
thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
ACE/61/-
/24
confirmed (2011)
BS L 118:1975 Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy
(solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm
thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
ACE/61/-/24
confirmed (2011)
BS L 114:1971 Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution
treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable
for welding) (Mg 0.8, Si 1, Mn 0.7)
ACE/61/-/24
confirmed (2011)
BS L 105:1971 Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution
treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg
0.5, Si 0.7, Mn 0.8)
ACE/61/-/24
confirmed (2011)
BS L 160:1976 Specification. Bars and extruded sections of aluminium-zinc-magnesium-copper-chromium
alloy (solution treated and artificially aged to
an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
ACE/61/-/24
replaced by BS EN 2127:1992
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 85 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS L 111:1971 Specification for bars and extruded sections
of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation
treated) (suitable for welding) (Mg 0.8, Si 1,
Mn 0.7)
ACE/61/-
/24
replaced by BS EN
2326:1992
BS 2L 77:1971 Specification for forging stock and forgings of
aluminium-copper-magnesium-silicon-
manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7,
Mn 0.8)
ACE/61/-
/24
confirmed (2011)
BS 2L 95:1971 Specification for plate of aluminium-zinc-
magnesium-copper-chromium alloy (solution
treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu
1.6, Cr 0.15)
ACE/61/-
/24
replaced by BS EN
2126:1992
BS 3L 63:1971 Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution
treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
ACE/61/-/24
confirmed (2011)
BS 4L 56:1986 Specification for tube of aluminium-2$9D%
magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not
exceeding 12 mm wall thickness)
ACE/61/-
/24
confirmed (2011)
BS 2L 126:1970 Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy
(precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6)
ACE/61/-/24
confirmed (2011)
BS L 154:1977 Specification for ingots and castings of
aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu
4, Si 1)
ACE/61/-
/24
confirmed (2011)
BS L 155:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution
treated and artificially aged) (Cu 4, Si 1)
ACE/61/-/24
confirmed (2011)
BS 4L 54:1986 Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically)
(not exceeding 12 mm wall thickness)
ACE/61/-/24
confirmed (2011)
BS 5L 36:1985 Specification for wire for solid, cold-forged
rivets of 99.5% aluminium (not exceeding 10
mm diameter)
ACE/61/-
/24
confirmed (2011)
BS 6L 16:1985 Specification for sheet and strip of 99%
aluminium (temper designation H14 or H24)
ACE/61/-
/24
confirmed (2011)
BS 6L 17:1985 Specification for sheet and strip of 99% aluminium (temper designation-O)
ACE/61/-/24
confirmed (2011)
BS 2HR 650:2011 Specification for high expansion heat-
resisting steel bar and wire for the manufacture of bolts, studs, set screws and
nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm)
ACE/61/-
/48
current
BS 3HR 502:2011 Specification for nickel-chromium-cobalt-
titanium- aluminium heat-resisting alloy cold drawn and solution treated wire for springs
and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
ACE/61/-
/48
current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 86 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 3HR 504:2011 Specification for nickel-chromium-titanium
heat-resisting alloy bar and wire for rivets and rivets (Maximum diameter or minor
sectional dimension 20 mm) (Nickel base, Cr
19.5, Ti 0.4)
ACE/61/-
/48
current
BS 3HR 503:2011 Specification for nickel-chromium-cobalt-
titanium- aluminium heat-resisting alloy wire
for thread inserts (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) (0.45 mm to 2 mm
diameter)
ACE/61/-
/48
current
BS 3HR 501:2011 Specification for nickel-chromium-cobalt-
titanium- aluminium heat-resisting alloy cold
drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
ACE/61/-
/48
current
BS 2HR 209:2011 Specification for nickel-chromium-cobalt-
molybdenum- titanium-aluminium heat-resisting alloy plate, sheet and strip (Nickel
base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)
ACE/61/-
/48
current
BS 2HR 404:2011 Specification for nickel-cobalt-chromium-
molybdenum- titanium-aluminium heat-
resisting alloy seamless tubes (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
ACE/61/-
/48
current
BS 2HR 240:2011 Specification for cobalt-chromium-tungsten-
nickel-manganese heat-resisting alloy plate, sheet and strip (Cobalt base, Cr 20, W 15, Ni
10, Mn 1.5)
ACE/61/-
/48
current
BS 2HR 402:2011 Specification for nickel-chromium-cobalt-
titanium-aluminium heat-resisting alloy
seamless tubes (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
ACE/61/-
/48
current
BS 3HR 401:2011 Specification for nickel-chromium-titanium-
aluminium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)
ACE/61/-
/48
current
BS 2HR 403:2011 Specification for nickel-chromium-titanium
heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 0.4)
ACE/61/-
/48
current
BS 3TA 11:2009 Specification for bar and section for machining of titanium-aluminium -vanadium
alloy (tensile strength 900-1160 MPa)
(limiting ruling section 150 mm)
ACE/61/-/49
partially replaced by BS EN
3355:2012
BS F 159:2006 Properties of elastomeric toroidal sealing
rings ("O" rings) manufactured from oil
resistant silicone rubber material conforming to BS F 153. Specification
ACE/65 confirmed (2011)
BS F 162:2006 Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from
ethylene-propylene rubber material
conforming to BS F 156. Specification
ACE/65 confirmed (2011)
BS F 164:2006 Properties of elastomeric toroidal sealing
rings ("O" rings) manufactured from
fluorosilicone rubber material released to BS F 154. Specification
ACE/65 confirmed (2011)
BS PL 4:2005 Properties of unsaturated polyester resins for low pressure laminating of high strength fibre
reinforced composites. Specification
ACE/65 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 87 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS PL 8:2005 Fibrous polyamide material for use as an
explosion suppressant and as a baffle material in aircraft fuel tanks. Specification
ACE/65 confirmed (2011)
BS PL 9:2005 Fibrous polyamide material for use as an
explosion suppressant and as a baffle material in aircraft fuel tanks. Test methods
ACE/65 confirmed (2011)
BS F 136:1989 Specification for pigmented
chlorosulphonated polyethylene rubber-coated nylon fabric (190 g/m$u2) for
aerospace purposes
ACE/65 confirmed (2011)
BS PL 6:2005 Properties of unsaturated polyester resins for low pressure laminating of glass fibre
reinforced composites. Specification
ACE/65 confirmed (2011)
BS PL 5:2005 Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced
composites. Test methods
ACE/65 confirmed (2011)
BS PL 7:2005 Unsaturated polyester resins for low pressure
laminating of glass fibre reinforced laminates.
Test methods
ACE/65 confirmed (2011)
BS F 156:2006 Properties of fluid resistant ethylene-
propylene rubber sheet, mouldings and
extrusions. Specification
ACE/65 confirmed (2011)
BS 4F 124:1996 Specification for woven nylon 6.6 narrow
fabrics for aerospace purposes (nominally 940 dtex yarns)
ACE/65 confirmed (2011)
BS F 157:2006 Properties of high tear strength silicone
rubber sheet, mouldings and extrusions. Specification
ACE/65 confirmed (2011)
BS F 152:2006 Properties of silicone rubber sheet,
mouldings and extrusions (general purpose). Specification
ACE/65 confirmed (2011)
BS F 153:2006 Properties of oil resistant silicone rubber
sheet, mouldings and extrusions. Specification
ACE/65 confirmed (2011)
BS F 154:2006 Properties of fluorosilicone rubber sheet,
mouldings and extrusions. Specification
ACE/65 confirmed (2011)
BS 4F 123:1996 Woven nylon narrow fabrics for aerospace
purposes (nominally 235 dtex yarns)
ACE/65 confirmed (2011)
BS 3F 121:1995 Specification for metallic slide fasteners for aerospace purposes
ACE/65 confirmed (2011)
BS F 143:1993 Specification for para-aramid braided cords
for aerospace purposes
ACE/65 confirmed (2011)
BS 2F 52:1959 Flax reinforcement webbing for aeronautical
purposes
ACE/65 confirmed (2011)
BS 2X 34:1998 Specification for two component polyurethane finish for aerospace purposes
ACE/65/-/3 confirmed (2009)
BS G 257-1:1998 Design of electromagnetic hazard protection
of civil aircraft -- Guide to theory and threats
ACE/66 confirmed (2011)
BS G 257-2:1998 Design of electromagnetic hazard protection
of civil aircraft -- Guide to protection
ACE/66 confirmed (2011)
BS 8412:2004 Equipment for crop protection. Performance requirements for application systems used to
make spatially variable applications to field crops. Specification
AGE/15 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 88 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 6356-9:1996 Spraying equipment for crop protection --
Specification for systems for closed transfer of liquid formulations
AGE/15 confirmed (2011)
BS 6356-4:1989 Spraying equipment for crop protection --
Specification for performance limits for field spraying nozzles
AGE/15 confirmed (2011)
BS 6356-7:1993 Spraying equipment for crop protection --
Guide for typical data sheet layout
AGE/15 confirmed (2011)
BS 6356-8:1996 Spraying equipment for crop protection --
Specification for induction hoppers
AGE/15 confirmed (2011)
BS 7411:1991 Specification for lever operated knapsack sprayers
AGE/15 confirmed (2011)
BS 4115:1993 Specification for compression knapsack
sprayers
AGE/15 confirmed (2011)
BS 7562-6:1992 Planning, design and installation of irrigation
schemes -- Guide for feasibility and
implementation procedures
AGE/30 confirmed (2011)
BS 7562-2:1992 Planning, design and installation of irrigation
schemes -- Guide for acquisition of site data
AGE/30 confirmed (2011)
BS 7562-5:1993 Planning, design and installation of irrigation schemes -- Guide for irrigation equipment
AGE/30 confirmed (2011)
BS 7562-4:1992 Planning, design and installation of irrigation
schemes -- Guide to water resources
AGE/30 confirmed (2011)
BS 7562-1:1992 Planning, design and installation of irrigation
schemes -- Glossary of terms
AGE/30 confirmed (2011)
BS 4742-6:1988 Hydraulic equipment for agricultural machinery -- Specification for dimensions and
location of agricultural tractor hydraulic
return to sump porting
AGE/32 confirmed (2011)
BS 4742-8:1990 Hydraulic equipment for agricultural
machinery -- Method for colour coding of remote hydraulic power services and controls
on agricultural tractors
AGE/32 confirmed (2011)
BS 4742-7:1989 Hydraulic equipment for agricultural machinery -- Specification for port
connections for agricultural trailed vehicle
hydraulic brake couplings
AGE/32 confirmed (2011)
BS 3986-1:1998 Methods of test for drying performance of
agricultural grain dryers -- General procedures and limited requirements for
wheat
AGE/32 confirmed (2011)
BS 3986-2:1998 Methods of test for drying performance of agricultural grain dryers -- Additional
procedures and crop specific requirements
AGE/32 confirmed (2011)
BS 6142:1981 Specification for presentation of technical data on hydraulic systems of agricultural
tractors and machinery
AGE/32 confirmed (2011)
BS 4639:1987 Specification for brakes and braking systems for towed agricultural vehicles
AGE/32 confirmed (2011)
BS 5401:1990 Guide to information content and
presentation of operators' manuals provided for tractors and machinery for agriculture
and forestry
AGE/6 confirmed (2011)
BS 2468-1:1994 Glossary of terms and classification relating
to agricultural machinery and implements. --
Power and tractive units
AGE/6 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 89 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 6736:1986 Code of practice for hand signalling for use in
agricultural operations
AGE/6 confirmed (2011)
BS 7986:2005 Data quality metrics for industrial measurement and control systems.
Specification
AMT/7 confirmed (2011)
BS AU 40-4a:1966 Specification for motor vehicle lighting and signalling equipment -- Sealed beam
headlamps
AUE/1 confirmed (2011)
BS AU 156:1971 Recommendations for aiming of headlamps
and auxiliary lamps on motor vehicles
AUE/1 confirmed (2011)
BS AU 47:1965 Specification for advance warning triangle to indicate temporary obstructions
AUE/1 confirmed (2011)
BS AU 152:1970 Specification for rear marking plates for
vehicles
AUE/1 confirmed (2011)
BS AU 162a:1976 Specification for headlamp optical aiming
devices
AUE/1 confirmed (2011)
BS AU 242a:1998 Automotive windscreen repair. Code of practice
AUE/1 confirmed (2011)
BS AU 200-2a:1984 Spray reducing devices for heavy goods
vehicles -- Specification for performance of suppression material and devices, and
air/water separating material and devices
AUE/13 confirmed (2011)
BS AU 190:1983 Specification for interface dimensions and fixing bolts for the mounting of overrun
devices on delta shaped drawbars of trailers up to 2000 kg
AUE/13 confirmed (2011)
BS AU 29:1964 Specification for drawbar eyes and
forecarriage pins for connection between trailers of 5-35 tons gross weight and towing
vehicle
AUE/13 confirmed (2011)
BS AU 2a:1970 Specification for dimensions of 3$9H - 4$9H in diameter fifth wheel king pin for use with
extra heavy duty semi-trailers
AUE/13 confirmed (2011)
BS AU 146b:1970 Specification for standard automatic roller-type coupling for semi-trailers not exceeding
7$9D tons laden weight
AUE/13 confirmed (2011)
BS AU 30b:1970 Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to
14$9L tons laden weight
AUE/13 confirmed (2011)
BS AU 114b:1979 Specification for strength requirements of
towing brackets and coupling balls for
caravans and light trailers
AUE/13 confirmed (2011)
BS AU 210-2:1994 Drawbars for caravans and light trailers --
Specification for the design of aluminium
drawbars and chassis
AUE/13 confirmed (2011)
BS AU 217-2:1989 Maximum road speed limiters for motor
vehicles -- Specification for system and component requirements
AUE/13 confirmed (2011)
BS AU 200-1a:1984 Spray reducing devices for heavy goods
vehicles -- Specification for design of containment devices
AUE/13 confirmed (2011)
BS AU 25:1964 Specification for towing hook for use
between trailers of 5-14 tons gross weight and towing vehicle
AUE/13 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 90 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS AU 27:1964 Specification for towing hook for use
between trailers of 5-35 tons gross weight and towing vehicle
AUE/13 confirmed (2011)
BS AU 26:1964 Specification for towing jaw for use between
trailers of 5-16 tons gross weight and towing vehicle
AUE/13 confirmed (2011)
BS AU 28:1964 Specification for towing jaw for use between
trailers of 5-35 tons gross weight and towing vehicle
AUE/13 confirmed (2011)
BS AU 217-1a:1987 Maximum road speed limiters for motor
vehicles -- Specification for installed requirements
AUE/13 confirmed (2011)
BS AU 3:1970 Specification for clearance dimensions and
fifth wheel positions for tractors and semi-trailers
AUE/13 confirmed (2011)
BS AU 181:1982 Specification for interface dimensions for demountable vehicle body systems
AUE/13 confirmed (2011)
BS AU 24a:1989 Specification for towing connections for
trailers up to 5000 kg gross mass
AUE/13 confirmed (2011)
BS 6765-4:1987 Leisure accommodation vehicles. Caravans -- Specification for undergear
AUE/13 confirmed (2011)
BS AU 267:1998 Code of practice for breakaway cables and secondary couplings
AUE/13 confirmed (2011)
BS AU 5:1963 Specification for dimensions of a 'contact'
type coupling for vacuum and pressure braking systems on trailers and semi-trailers
AUE/15 partially replaced
by BS AU 138a:1980
BS AU 91:1965 Specification for dimensions of electrical
cable connectors for starter battery taper terminal posts (cars and light commercial
vehicles using positive earth system)
AUE/16 confirmed (2011)
BS AU 198:1984 Specification for electrical connections between towing vehicles and trailers with 24
V electrical equipment: type 24 S (supplementary)
AUE/16 confirmed (2011)
BS AU 197:1984 Specification for electrical connections
between towing vehicles and trailers with 24 V electrical equipment: type 24 N (normal)
AUE/16 confirmed (2011)
BS AU 16a:1989 Specification for electrical cable connectors
(17.5 A maximum continuous rating)
AUE/16 confirmed (2011)
BS AU 7a:1983 Specification for colour code for road vehicle
electrical cables
AUE/16 confirmed (2011)
BS AU 207:1986 Specification for dimensions of car radio installation space
AUE/16 confirmed (2011)
BS AU 209-2:1988 Vehicle security -- Specification for security
systems against theft of in-car equipment for entertainment and communication purposes
AUE/17 confirmed (2011)
BS AU 209-5b:1996 Vehicle security -- Specification for central
power locking systems for passenger cars and car derived vehicles
AUE/17 confirmed (2011)
BS AU 209-3:1988 Vehicle security -- Specification for security
marking of glazing for passenger cars and car derived vehicles
AUE/17 confirmed (2011)
BS AU 209-6a:1996 Vehicle security -- Specification for dead locking systems for passenger cars and car
derived vehicles
AUE/17 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 91 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS AU 209-4a:1995 Vehicle security -- Specification for security
glazing for passenger cars and car derived vehicles
AUE/17 confirmed (2011)
BS AU 175-4a:1997 Vehicle identification numbers (VIN) --
Specification for a visible vehicle identification number
AUE/17 confirmed (2011)
BS AU 209-1a:1992 Vehicle security -- Specification for locking
systems for passenger cars and car derived vehicles
AUE/17 confirmed (2011)
BS AU 209-7:1993 Vehicle security -- Specification for locking
systems for goods vehicle driver's compartments
AUE/17 confirmed (2011)
BS AU 209-8:1997 Vehicle security -- Specification for locking
systems for goods vehicle load compartments
AUE/17 confirmed (2011)
BS AU 209-0:1996 Vehicle security -- Guide to the application of
security devices/systems to vehicles
AUE/17 confirmed (2011)
BS AU 223a:2006 Design, construction performance and marking of vehicle support stands for cars
and light vans. Specification
AUE/9 confirmed (2011)
BS AU 187:2000 Tow rope assemblies for towing passenger cars and light vans
AUE/9 confirmed (2011)
BS 4585-18:1996 Methods of test for spices and condiments -- Determination of total capsaicinoid content of
chillies and chilli oleoresins (high-
performance liquid chromatographic method)
AW/-/2 confirmed (2011)
BS 7087-29:1997 Herbs and spices ready for food use --
Specification for dried whole dill seed, dill
leaves and ground dill
AW/-/2 confirmed (2011)
BS 7087-24:1996 Herbs and spices ready for food use --
Specification for dried pimento (allspice)
(whole and ground)
AW/-/2 confirmed (2011)
BS 4585-2:1982 Methods of test for spices and condiments --
Determination of moisture content (entrainment method)
AW/-/2 confirmed (2011)
BS 7087-12:1992 Herbs and spices ready for food use --
Specification for dried basil (bouquets, rubbed and ground)
AW/-/2 confirmed (2011)
BS 7087-18:1993 Herbs and spices ready for food use --
Specification for dried rosemary (whole, rubbed and ground)
AW/-/2 confirmed (2011)
BS 7087-1:1995 Herbs and spices ready for food use --
Specification for black and white pepper (whole and ground)
AW/-/2 confirmed (2011)
BS 7087-9:1996 Herbs and spices ready for food use --
Specification for dried marjoram (whole, rubbed and ground)
AW/-/2 confirmed (2011)
BS 7087-20:1995 Herbs and spices ready for food use -- Specification for dried parsley (cut, rubbed
and ground)
AW/-/2 confirmed (2011)
BS 7087-22:1995 Herbs and spices ready for food use -- Specification for dried mustard seeds (whole
and ground)
AW/-/2 confirmed (2011)
BS 7087-23:1995 Herbs and spices ready for food use -- Specification for dried caraway seeds (whole
and ground)
AW/-/2 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 92 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 7087-10:1996 Herbs and spices ready for food use --
Specification for dried mint (whole, rubbed and ground)
AW/-/2 confirmed (2011)
BS 7087-16:1993 Herbs and spices ready for food use --
Specification for oregano (whole, rubbed and ground)
AW/-/2 confirmed (2011)
BS 7087-28:1997 Herbs and spices ready for food use --
Specification for dried tarragon (whole and ground)
AW/-/2 confirmed (2011)
BS 7087-6:1996 Herbs and spices ready for food use --
Specification for coriander seeds (whole and ground)
AW/-/2 confirmed (2011)
BS 7087-19:1994 Herbs and spices ready for food use. --
Specification for fennel seeds (whole and ground)
AW/-/2 confirmed (2011)
BS 7087-7:1996 Herbs and spices ready for food use -- Specification for dried fenugreek (whole or
ground)
AW/-/2 confirmed (2011)
BS 4585-6:1992 Methods of test for spices and condiments -- Determination of non-volatile ether extract
AW/-/2 confirmed (2011)
BS 4585-7:1989 Methods of test for spices and condiments --
Determination of Scoville index of chillies
AW/-/2 confirmed (2011)
BS 7087-2:1995 Herbs and spices ready for food use --
Specification for dried thyme (whole and
ground)
AW/-/2 confirmed (2011)
BS 7087-27:1997 Herbs and spices ready for food use --
Specification for dried sesame seeds
(dehulled)
AW/-/2 confirmed (2011)
BS 7087-3:1996 Herbs and spices ready for food use --
Specification for dried sage (whole and
ground)
AW/-/2 confirmed (2011)
BS 7087-13:1992 Herbs and spices ready for food use --
Specification for turmeric (whole and ground)
AW/-/2 confirmed (2011)
BS 7087-14:1992 Herbs and spices ready for food use -- Specification for dried nutmeg and dried
mace
AW/-/2 confirmed (2011)
BS 7087-15:1993 Herbs and spices ready for food use -- Specification for cinnamon (whole and
ground)
AW/-/2 confirmed (2011)
BS 7087-17:1993 Herbs and spices ready for food use --
Specification for chillies (whole and ground)
AW/-/2 confirmed (2011)
BS 7087-26:1996 Herbs and spices ready for food use -- Specification for dehydrated garlic
AW/-/2 confirmed (2011)
BS 7087-25:1996 Herbs and spices ready for food use --
Specification for dehydrated onion
AW/-/2 confirmed (2011)
BS 3936-9:1998 Nursery stock -- Specification for bulbs,
corms and tubers
AW/1 confirmed (2011)
BS 3936-10:1990 Nursery stock -- Specification for ground cover plants
AW/1 confirmed (2011)
BS 3936-7:1989 Nursery stock -- Specification for bedding
plants
AW/1 confirmed (2011)
BS 3936-3:1990 Nursery stock -- Specification for fruit plants AW/1 confirmed (2011)
BS 3936-2:1990 Nursery stock -- Specification for roses AW/1 confirmed (2011)
BS 998:1990 Specification for vacuum salt for food use AW/100 confirmed (2011)
BS 5226:1991 Code of practice for equipment and
procedures for the cleaning and disinfecting of milking machine installations
AW/17 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 93 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 5305:1984 Code of practice for cleaning and disinfecting
of plant and equipment used in the dairying industry
AW/17 confirmed (2011)
BS 4285-4:1991 Microbiological examination for dairy
purposes -- Methods for assessment of hygienic conditions
AW/17 confirmed (2011)
BS 7771:1994 Code of practice for pasteurization of milk on
farms and in small dairies
AW/17 confirmed (2011)
BS 684-0.1:1995 Methods of analysis of fats and fatty oils.
General introduction -- General procedures
and list of determinations in BS 684
AW/307 confirmed (2011)
BS 684-1.11:1976 Methods of analysis of fats and fatty oils.
Physical methods -- Determination of
penetration value
AW/307 confirmed (2011)
BS 684-1.13:1976 Methods of analysis of fats and fatty oils.
Physical methods -- Determination of cooling curve
AW/307 confirmed (2011)
BS 684-1.5:1987 Methods of analysis of fats and fatty oils.
Physical methods -- Determination of cloud point
AW/307 confirmed (2011)
BS 5190:1985 Specification for pipeline filters, filter bodies
and filter elements for milking installations
AW/32 confirmed (2011)
BS 4317-20:1999 Methods of test for cereals and pulses --
Determination of water absorption of flour
and rheological properties of doughs using a farinograph
AW/4 confirmed (2011)
BS 4317-19:1990 Methods of test for cereals and pulses --
Determination of protein quality of wheat by the sodium dodecyl sulphate (SDS) test
AW/4 confirmed (2011)
BS 4317-21:1999 Methods of test for cereals and pulses --
Determination of rheological properties of doughs using an extensograph
AW/4 confirmed (2011)
BS 4317-18:1988 Methods of test for cereals and pulses -- Determination of hidden insect infestation
AW/4 confirmed (2011)
BS 734C:1962 Measurement of the density of milk using a
hydrometer -- Percentage of total solids and non-fatty solids in milk corresponding to
given fat content and observed density fat
content range 2-6 per cent (with fat in the liquid state)
AW/5 confirmed (2011)
BS 3095-2:1988 Methods for determination of the freezing-point depression of milk -- Recommendations
for the interpretation of the freezing-point
depression of herd milk
AW/5 confirmed (2011)
BS 1743-6.1:1983 Methods for analysis of dried milk and dried
milk products. Assessment of the heat class
of dried milk -- Heat number method (reference method)
AW/5 confirmed (2011)
BS 1743-4:1980 Methods for analysis of dried milk and dried milk products -- Determination of the
dispersibility and the wetting time of instant
dried milk
AW/5 confirmed (2011)
BS 1741-6.1:1990 Methods for chemical analysis of liquid milk
and cream. Determination of casein nitrogen
content of liquid milk -- Reference method
AW/5 confirmed (2011)
BS 1741-6.2:1990 Methods for chemical analysis of liquid milk
and cream. Determination of casein nitrogen content of liquid milk -- Routine method
AW/5 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 94 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 4938-2P:1982 Dirt content of milk -- Photographic
standards for the method for the determination of visible dirt content of milk
(rapid method)
AW/5 confirmed (2011)
BS 1741-5.1:1988 Methods for chemical analysis of liquid milk and cream. Determination of the nitrogen
content of liquid milk -- Reference method
AW/5 confirmed (2011)
BS 1741-5.2:1990 Methods for chemical analysis of liquid milk and cream. Determination of the nitrogen
content of liquid milk -- Routine method
AW/5 confirmed (2011)
BS 1743-1:1986 Methods for analysis of dried milk and dried milk products -- General introduction,
including preparation of laboratory samples
AW/5 confirmed (2011)
BS 1741-10.1:1989 Methods for chemical analysis of liquid milk and cream. Determination of titratable acidity
-- Method for liquid milk
AW/5 confirmed (2011)
BS 1741-10.2:1989 Methods for chemical analysis of liquid milk
and cream. Determination of titratable acidity
-- Method for cream
AW/5 confirmed (2011)
BS 1741-1:1987 Methods for chemical analysis of liquid milk
and cream -- General introduction including
preparation of samples
AW/5 confirmed (2011)
BS 1742-1:1990 Methods for chemical analysis of condensed
milks -- General introduction, including preparation of test samples
AW/5 confirmed (2011)
BS 1741-7.1:1989 Methods for chemical analysis of liquid milk
and cream. Determination of lactose content -- Reference method
AW/5 confirmed (2011)
BS 1741-7.2:1989 Methods for chemical analysis of liquid milk
and cream. Determination of lactose content -- Routine method
AW/5 confirmed (2011)
BS 1741-8:1988 Methods for chemical analysis of liquid milk
and cream -- Determination of chloride content of liquid milk
AW/5 confirmed (2011)
BS 1743-19:1985 Methods for analysis of dried milk and dried
milk products -- Determination of scorched particles content
AW/5 confirmed (2011)
BS 1742-5.1:1991 Methods for chemical analysis of condensed
milks. Determination of nitrogen content -- Reference method
AW/5 confirmed (2011)
BS 770-2:1976 Methods for chemical analysis of cheese -- Determination of water content (reference
and routine methods)
AW/5 confirmed (2011)
BS 1741-11:1989 Methods for chemical analysis of liquid milk and cream -- Detection of
detergent/disinfectant residues
AW/5 confirmed (2011)
BS 1742-5.2:1991 Methods for chemical analysis of condensed milks. Determination of nitrogen content --
Routine method
AW/5 confirmed (2011)
BS 734-1:1973 Measurement of the density of milk using a hydrometer -- Specification for hydrometers
for use in milk
AW/5 confirmed (2011)
BS 5272:1975 Method for simultaneous routine determination of the water contents of a
batch of dried milk samples
AW/5 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 95 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 1741-9:1988 Methods for chemical analysis of liquid milk
and cream -- Determination of ash from liquid milk
AW/5 confirmed (2011)
BS 3095-1.2:1988 Methods for determination of the freezing-
point depression of milk. Methods -- Hortvet method
AW/5 confirmed (2011)
BS 770-8:1987 Methods for chemical analysis of cheese --
Determination of nitrogen content (reference method)
AW/5 confirmed (2011)
BS 1742-4:1991 Methods for chemical analysis of condensed
milks -- Determination of ash from condensed milks
AW/5 confirmed (2011)
BS 4938-2:1982 Dirt content of milk -- Method for the
determination of visible dirt content (rapid method)
AW/5 confirmed (2011)
BS 6248-1:1982 Caseins and caseinates -- General introduction, including preparation of
laboratory samples
AW/5 confirmed (2011)
BS 6248-6:1982 Caseins and caseinates -- Method for determination of lactose content
(photometric method)
AW/5 confirmed (2011)
BS 3095-3:1981 Methods for determination of the freezing-point depression of milk -- Storage of
samples
AW/5 confirmed (2011)
BS 4938-1:1982 Dirt content of milk -- Method for the determination of dirt content (reference
method)
AW/5 confirmed (2011)
BS 5086-4:1985 Analysis of butter -- Method for determination of salt content (reference
method)
AW/5 confirmed (2011)
BS 5086-3:1984 Analysis of butter -- Method for determination of water content (routine
method)
AW/5 confirmed (2011)
BS 5086-1:1984 Analysis of butter -- General introduction
including preparation of samples
AW/5 confirmed (2011)
BS 5086-7:1991 Analysis of butter -- Method for determination of pH of butter serum
AW/5 confirmed (2011)
BS 770-5:1976 Methods for chemical analysis of cheese --
Determination of pH value
AW/5 confirmed (2011)
BS 734-2:1959 Measurement of the density of milk using a
hydrometer -- Methods
AW/5 confirmed (2011)
BS 770-1:1986 Methods for chemical analysis of cheese -- General introduction
AW/5 confirmed (2011)
BS 1743:1968 Methods for analysis of dried milk and dried
milk products
AW/5 confirmed (2011)
BS 4401-4:1970 Methods of test for meat and meat products
-- Determination of total fat content
AW/6 confirmed (2011)
BS 4401-7:1976 Methods of test for meat and meat products -- Determination of nitrate content
AW/6 confirmed (2011)
BS 4401-8:1976 Methods of test for meat and meat products
-- Determination of nitrite content
AW/6 confirmed (2011)
BS 4285-3.9.2:1992 Microbiological examination for dairy
purposes. Methods for detection and/or
enumeration of specific groups of microorganisms. Detection of Salmonella --
Screening method using electrical conductance
AW/9 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 96 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 4285-3.4.2:1989 Microbiological examination for dairy
purposes. Methods for detection and/or enumeration of specific groups of
microorganisms. Enumeration of lipolytic
microorganisms -- Tributyrin agar method
AW/9 confirmed (2011)
BS 4285-3.5:1988 Microbiological examination for dairy
purposes. Methods for detection and/or
enumeration of specific groups of microorganisms -- Enumeration of proteolytic
microorganisms
AW/9 confirmed (2011)
BS 4285-2.5:1989 Microbiological examination for dairy
purposes. Methods of general application for
enumeration of microorganisms -- Enumeration of bacteria by direct microscopic
counts
AW/9 confirmed (2011)
BS 4285-3.2:1991 Microbiological examination for dairy purposes. Methods for detection and/or
enumeration of specific groups of microorganisms -- Enumeration of
thermoduric bacteria
AW/9 confirmed (2011)
BS 5763-5:1981 Methods for microbiological examination of food and animal feeding stuffs --
Enumeration of micro-organisms. Colony count at 30$0DC (surface plate technique)
AW/9 confirmed (2011)
BS 4285-5.3:1987 Microbiological examination for dairy
purposes. Ancillary methods -- Test for inhibitory substances
AW/9 confirmed (2011)
BS 1722-9:2006 Fences -- Specification for mild steel (low
carbon steel) fences with round or square verticals and flat horizontals
B/201 confirmed (2011)
BS 1722-17:2006 Fences -- Specification for electric security
fences. Design, installation and maintenance
B/201 confirmed (2011)
BS 1722-8:2006 Fences -- Specification for mild steel (low
carbon steel) continuous bar fences and
hurdles
B/201 confirmed (2011)
BS 1722-18:2011 Fences -- Specification for free-standing
temporary steel mesh perimeter fencing panels
B/201 current
BS 1722-10:2006 Fences -- Specification for anti-intruder
fences in chain link and welded mesh
B/201 confirmed (2011)
BS 1722-5:2006 Fences -- Specification for close-boarded fences and wooden palisade fences
B/201 confirmed (2011)
BS 1722-2:2006 Fences -- Specification for strained wire and wire mesh netting fences
B/201 confirmed (2011)
BS 1722-11:2006 Fences -- Specification for prefabricated
wood panel fences
B/201 confirmed (2011)
BS 1722-14:2006 Fences -- Specification for open mesh steel panel fences
B/201 confirmed (2011)
BS 1722-7:2006 Fences -- Specification for wooden post and rail fences
B/201 confirmed (2011)
BS 1722-12:2006 Fences -- Specification for steel palisade
fences
B/201 confirmed (2011)
BS 1722-1:2006 Fences -- Specification for chain link fences B/201 confirmed (2011)
BS 5709:2006 Gaps, gates and stiles. Specification B/201 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 97 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 8103-1:2011 Structural design of low-rise buildings --
Code of practice for stability, site investigation, foundations, precast concrete
floors and ground floor slabs for housing
B/204 current
BS 5395-2:1984 Stairs, ladders and walkways -- Code of practice for the design of helical and spiral
stairs
B/208 confirmed (2011)
BS 4592-1:2006 Industrial type flooring and stair treads -- Metal open bar gratings. Specification
B/208 confirmed (2011)
BS 5395-4:2011 Code of practice for the design of stairs for
limited access
B/208 current
BS 6180:2011 Barriers in and about buildings. Code of
practice
B/208 current
BS 4592-5:2006 Industrial type flooring and stair treads -- Solid plates in metal and glass reinforced
plastics (GRP). Specification
B/208/1 confirmed (2011)
BS 4592-4:2006 Industrial type flooring and stair treads -- Glass reinforced plastics (GRP) open bar
gratings. Specification
B/208/1 confirmed (2011)
BS 4592-2:2006 Industrial type flooring and stair treads -- Expanded metal gratings. Specification
B/208/1 confirmed (2011)
BS 7370-1:1991 Grounds maintenance -- Recommendations for establishing and managing grounds
maintenance organizations and for design
considerations related to maintenance
B/213 confirmed (2011)
BS 7370-3:1991 Grounds maintenance -- Recommendations
for maintenance of amenity and functional
turf (other than sports turf)
B/213 confirmed (2011)
BS 7370-2:1994 Grounds maintenance -- Recommendations
for the maintenance of hard areas (excluding
sports surfaces)
B/213 confirmed (2011)
BS 7370-4:1993 Grounds maintenance -- Recommendations
for maintenance of soft landscape (other than amenity turf)
B/213 confirmed (2011)
BS 4428:1989 Code of practice for general landscape
operations (excluding hard surfaces)
B/213 confirmed (2011)
BS 7370-5:1998 Grounds maintenance -- Recommendations for the maintenance of water areas
B/213 confirmed (2011)
PD 6682-5:2005 Aggregates -- Lightweight aggregates for bituminous mixtures and surface treatments
and for unbound and bound applications.
Guidance on the use of BS EN 13055-2
B/502/5 confirmed (2011)
PD 6682-4:2003 Aggregates -- Lightweight aggregates for
concrete, mortar and grout. Guidance on the
use of BS EN 13055-1
B/502/5 confirmed (2011)
BS 812-104:1994 Testing aggregates -- Method for qualitative
and quantitative petrographic examination of aggregates
B/502/6 confirmed (2011)
BS 812-103.2:1989 Testing aggregates. Method for
determination of particle size distribution -- Sedimentation test
B/502/6 confirmed (2011)
BS 812-123:1999 Testing aggregates -- Method for
determination of alkali-silica reactivity. Concrete prism method
B/502/6 confirmed (2011)
BS 812-114:1989 Testing aggregates -- Method for
determination of the polished-stone value
B/502/6 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 98 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 812-109:1990 Testing aggregates -- Methods for
determination of moisture content
B/502/6 confirmed (2011)
PD 6682-9:2003 Aggregates -- Guidance on the use of European test method standards
B/502/6 confirmed (2011)
BS 812-121:1989 Testing aggregates -- Method for
determination of soundness
B/502/6 confirmed (2011)
BS 5834-4:2011 Surface boxes, guards and underground
chambers for the purposes of utilities -- Specification for utility chambers
B/504 current
BS 5834-2:2011 Surface boxes, guards and underground
chambers for the purposes of utilities -- Specification for surface boxes
B/504 current
BS 8542:2011 Calculating domestic water consumption in
non-domestic buildings. Code of practice
B/504 current
BS 1566-
1:2002+A1:2011
Copper indirect cylinders for domestic
purposes -- Open vented copper cylinders.
Requirements and test methods
B/504/-/10 current
BS 7942:2011 Thermostatic mixing valves for use in care
establishments. Requirements and test
methods
B/504/-/8 current
BS 8525-2:2011 Greywater systems -- Domestic greywater
treatment equipment. Requirements and test methods
B/505/50 current
BS 6999:1989 Specification for vitreous-enamelled low-
carbon-steel flue pipes, other components and accessories for solid-fuel-burning
appliances with a rated output of 45 kW
B/506 current
BS 41:1973 Specification for cast iron spigot and socket flue or smoke pipes and fittings
B/506 current
BS 567:1973 Specification for asbestos-cement flue pipes
and fittings, light quality
B/506 current
BS 835:1973 Specification for asbestos-cement flue pipes
and fittings, heavy quality
B/506 current
BS 7533-12:2006 Pavements constructed with clay, natural stone or concrete pavers -- Guide to the
structural design of trafficked pavements
constructed on a bound base using concrete paving flags and natural stone slabs
B/507 confirmed (2011)
BS 7533-4:2006 Pavements constructed with clay, natural stone or concrete pavers -- Code of practice
for the construction of pavements of precast
concrete flags or natural stone slabs
B/507 confirmed (2011)
BS 1703:2005 Refuse chutes and hoppers. Specification B/508/1 confirmed (2011)
BS 792:1973 Specification for mild steel dustbins B/508/1 confirmed (2011)
BS 6779-4:1999 Highway parapets for bridges and other
structures -- Specification for parapets of reinforced and unreinforced masonry
construction
B/509/1 confirmed (2011)
BS 1924-1:1990 Stabilized materials for civil engineering purposes -- General requirements, sampling,
sample preparation and tests on materials before stabilization
B/510 current
BS 1924-2:1990 Stabilized materials for civil engineering
purposes -- Methods of test for cement-stabilized and lime-stabilized materials
B/510 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 99 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 598-1:2011 Sampling and examination of bituminous
mixtures for roads and other paved areas -- Methods for the measurement of the rate of
spread of coated chippings and the
temperature of bituminous mixtures using non-contact temperature-measuring devices
and for the assessment of the compaction performance of a roller
B/510/1 current
BS 434-1:2011 Bitumen road emulsions -- Specification for
anionic bitumen road emulsions
B/510/19 current
BS 3247:2011 Specification for salt for spreading on
highways for winter maintenance
B/510/21 current
BS 7941-1:1999 Methods for measuring the skid resistance of pavement surfaces -- Side-way force
coefficient routine investigation machine
B/510/5 replaced by BS 7941-1:2006
BS 6770:1988 Guide for exterior colours for park homes (mobile homes), holiday caravans and
transportable accommodation units
B/511 confirmed (2011)
BS 6767-1:1999 Transportable accommodation units -- Recommendations for design and
construction of the basic unit
B/511/1 confirmed (2011)
BS 6164:2011 Code of practice for health and safety in tunnelling in the construction industry
B/513 current
BS 6187:2011 Code of practice for full and partial demolition
B/513 current
BS 4550-3.4:1978 Methods of testing cement. Physical tests --
Strength tests
B/516/12 replaced by BS EN
196-1:1995 as it is quoted in other
standards.
Partially replaced by BS 1881-
131:1998
BS 1881-119:2011 Testing concrete -- Method for determination of compressive strength using portions of
beams broken in flexure (equivalent cube method)
B/517 current
BS 8000-2.1:1990 Workmanship on building sites. Code of
practice for concrete work -- Mixing and transporting concrete
B/517 partially replaced
by BS 8000-0:2014
BS 1881-113:2011 Testing concrete -- Method for making and
curing no-fines test cubes
B/517 current
BS 1881-129:2011 Testing concrete -- Method for determination
of density of partially compacted semi-dry fresh concrete
B/517/1 current
BS 1881-122:2011 Testing concrete -- Method for determination
of water absorption
B/517/1 current
BS 8443:2005 Specification for establishing the suitability of special purpose concrete admixtures
B/517/3 confirmed (2011)
BS 6319-3:1990 Testing of resin and polymer/cement compositions for use in construction --
Methods for measurement of modulus of
elasticity in flexure and flexural strength
B/517/8 confirmed (2011)
BS 6319-6:1984 Testing of resin and polymer/cement
compositions for use in construction --
Method for determination of modulus of elasticity in compression
B/517/8 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 100 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 6319-2:1983 Testing of resin and polymer/cement
compositions for use in construction -- Method for measurement of compressive
strength
B/517/8 confirmed (2011)
BS 1990-1:1984 Wood poles for overhead power and telecommunication lines -- Specification for
softwood poles
B/518 confirmed (2011)
BS 4978:2007+A1:201
1
Visual strength grading of softwood. Specification
B/518 current
BS 5756:2007+A1:201
1
Visual strength grading of hardwood. Specification
B/518 current
BS 6206:1981 Specification for impact performance requirements for flat safety glass and safety
plastics for use in buildings
B/520 partially replaced by BS EN
12600:2002
BS 6262:1982 Code of practice for glazing for buildings B/520/4 partially replaced
by Parts 1-4 and
6-7 of BS 6262. It will be withdrawn
on publication of BS 6262-5
BS 4485-4:1996 Water cooling towers -- Code of practice for
structural design and construction
B/525 confirmed (2011)
BS 4485-3:1988 Water cooling towers -- Code of practice for
thermal and functional design
B/525 confirmed (2011)
BS 4485-2:1988 Water cooling towers -- Methods for performance testing
B/525 confirmed (2011)
PD 6688-1-1:2011 Recommendations for the design of
structures to BS EN 1991-1-1
B/525/1 current
PD 6688-2:2011 Background to the National Annex to BS EN 1991-2 -- Traffic loads on bridges
B/525/10 current
CP 118:1969 The structural use of aluminium B/525/9 replaced by BS 8118-1:1991 and
BS 8118-2:1991
PD 6694-1:2011 Recommendations for the design of structures subject to traffic loading to BS EN
1997-1:2004
B/526 current
BS 22475-3:2011 Geotechnical investigation and testing. Sampling methods and groundwater
measurements -- Conformity assessment of enterprises and personnel by third party
B/526/3 current
BS 22475-2:2011 Geotechnical investigation and testing.
Sampling methods and groundwater measurements -- Qualification criteria for
enterprises and personnel
B/526/3 current
BS 1377-2:1990 Methods of test for soils for civil engineering purposes -- Classification tests
B/526/3 partially replaced by BS EN ISO
17892-2:2014
BS 8006-2:2011 Code of practice for strengthened/reinforced soils -- Soil nail design
B/526/4 current
BS 459:1988 Specification for matchboarded wooden door
leaves for external use
B/538/1 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 101 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 8000-11:2011 Workmanship on building sites -- Internal
and external wall and floor tiling. Ceramic and agglomerated stone tiles, natural stone
and terrazzo tiles and slabs, and mosaics.
Code of practice
B/539 partially replaced
by BS 8000-0:2014
BS 2972:1989 Methods of test for inorganic thermal
insulating materials
B/540 partially replaced
by BS EN 13467
to BS EN 13472:2001
BS 8201:2011 Code of practice for installation of flooring of
wood and wood-based panels
B/543 current
BS 8481:2006 Design, preparation and application of
internal gypsum, cement, cement and lime
plastering systems. Specification
B/544 confirmed (2011)
BS 8298:1994 Code of practice for design and installation of
natural stone cladding and lining
B/545 replaced by BS
8298 Parts 1 to 4
BS 6925:1988 Specification for mastic asphalt for building and civil engineering (limestone aggregate)
B/546 confirmed (2011)
BS 5284:1993 Methods of sampling and testing mastic
asphalt used in building and civil engineering
B/546 confirmed (2011)
CP 102:1973 Code of practice for protection of buildings
against water from the ground
B/546 partially replaced
by BS 8102:1990 and BS 8215:1991
BS 2832:1957 Specification for hot applied damp resisting
coatings for solums
B/546 confirmed (2011)
BS 743:1970 Specification for materials for damp-proof courses
B/546 partially replaced by BS 6398:1983,
BS 6515:1984 and BS 8215:1991
BS 8218:1998 Code of practice for mastic asphalt roofing B/546 confirmed (2011)
BS 8449:2005 Building and construction sealants with
movement accommodation factors greater than 25%. Method of test for determination
of adhesion/cohesion properties at variable temperatures
B/547 confirmed (2011)
BS 3712-2:1973 Building and construction sealants -- Methods
of test for seepage, staining, shrinkage, shelf life and paintability
B/547 confirmed (2011)
BS 3712-3:1974 Building and construction sealants -- Methods
of test for application life, skinning properties and tack-free time
B/547 confirmed (2011)
BS 3712-1:1991 Building and construction sealants -- Methods
of test for homogeneity, relative density and penetration
B/547 confirmed (2011)
BS 3712-4:1991 Building and construction sealants -- Method of test for adhesion in peel
B/547 confirmed (2011)
BS 5502-40:2005 Buildings and structures for agriculture --
Code of practice for design and construction of cattle buildings
B/549 confirmed (2011)
BS 5502-
31:1995+A1:2011
Buildings and structures for agriculture --
Guide to the storage and handling of waste
B/549 confirmed (2011)
BS 5502-11:2005 Buildings and structures for agriculture --
Guide to regulations and sources of
information
B/549 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 102 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
PD 6446:1970 Recommendations for the co-ordination of
dimensions in building. Combinations of sizes
B/554 confirmed (2011)
BS 6750:1986 Specification for modular coordination in building
B/554 confirmed (2011)
BS 5606:1990 Guide to accuracy in building B/554 confirmed (2011)
BS 8541-2:2011 Library objects for architecture, engineering and construction -- Recommended 2D
symbols of building elements for use in
building information modelling
B/555 current
BS 8220-3:2004 Guide for security of buildings against crime -
- Storage, industrial and distribution premises
B/562 confirmed (2011)
BS 8220-1:2000 Guide for security of buildings against crime -- Dwellings
B/562 confirmed (2011)
BS 2853:2011 Specification for the testing of steel overhead
runway beams for hoist blocks
CB/203 current
BS 8204-
3:2004+A2:2011
Screeds, bases and in situ floorings --
Polymer modified cementitious levelling
screeds and wearing screeds. Code of practice
CB/300 current
BS 8204-5:2004+A1:2011
Screeds, bases and in situ floorings -- Mastic asphalt underlays and wearing surfaces.
Code of practice
CB/300 current
BS 8204-4:2004+A1:2011
Screeds, bases and in situ floorings -- Cementitious terrazzo wearing surfaces.
Code of practice
CB/300 current
BS 8204-2:2003+A2:2011
Screeds, bases and in situ floorings -- Concrete wearing surfaces. Code of practice
CB/300 current
BS 8204-7:2003 Screeds, bases and in-situ floorings --
Pumpable self-smoothing screeds. Code of practice
CB/300 confirmed (2011)
BS 8534:2011 Construction procurement policies, strategies
and procedures. Code of practice
CB/500 current
BS 8533:2011 Assessing and managing flood risk in
development. Code of practice
CB/501 current
BS 6349-7:1991 Maritime structures -- Guide to the design and construction of breakwaters
CB/502 confirmed (2011)
BS 6349-5:1991 Maritime structures -- Code of practice for
dredging and land reclamation
CB/502 confirmed (2011)
BS 5726:2005 Microbiological safety cabinets. Information
to be supplied by the purchaser to the
vendor and to the installer, and siting and use of cabinets. Recommendations and
guidance
CH/100 confirmed (2011)
BS 2588-2:1992 Portable sanitary pans for use in healthcare
establishments -- Specification for reusable
pans for commode chairs
CH/100 confirmed (2011)
BS 3221-6:1987 Medicine measures -- Specification for free-
standing plastics medicine measuring spoons
of 5 mL capacity
CH/100 confirmed (2011)
BS 2588-1:1992 Portable sanitary pans for use in healthcare
establishments. -- Specification for reusable bed pans
CH/100 confirmed (2011)
BS 3221-7:1995 Medicine measures -- Specification for oral
syringes delivering doses up to and including 5 ml
CH/100 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 103 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 1823:1973 Specification for stainless steel hollow-ware
for use in hospital operating-theatres and wards
CH/100 confirmed (2011)
BS 3221-1:1985 Medicine measures -- Specification for
medicine measures of 50 ml total graduated capacity
CH/100 confirmed (2011)
BS 5452:1977 Specification for hospital hollow-ware made
of plastics material
CH/100 confirmed (2011)
BS 7088:1989 Specification for pneumatic tourniquet
equipment
CH/100 confirmed (2011)
BS 3215:1995 Specification for reusable portable urinals CH/100 confirmed (2011)
BS 5402:1976 Specification for patient trolleys CH/100 confirmed (2011)
BS 8447:2005 Anaesthetic and respiratory equipment. Hook-on fittings for the attachment of
vaporizers to an anaesthetic gas delivery device
CH/121/1 confirmed (2011)
BS 8532:2011 Terminal units for high flow anaesthetic gas
scavenging systems. Specification for probes and type-specific connection points
CH/121/6 current
BS 7254-5:1990 Orthopaedic implants -- Specification for
production of castings made of cobalt-chromium-molybdenum alloy
CH/150/1 confirmed (2011)
BS 7251-1:1990 Orthopaedic joint prostheses -- Specification
for general requirements
CH/150/4 confirmed (2011)
BS 7254-2:1990 Orthopaedic implants -- Specification for
general requirements for materials and finish
CH/150/5 confirmed (2011)
BS 8432:2005 Spinal orthoses. Guide to design CH/168 confirmed (2011)
BS 5194-2:1989 Surgical instruments -- Specification for instruments with pivot joints (excluding
cutting instruments)
CH/170 confirmed (2011)
BS 5194-4:1985 Surgical instruments -- Specification for
scissors, shears and other jointed cutting
instruments
CH/170 confirmed (2011)
BS 2982:1992 Specification for materials and packaging of
surgical scalpels with detachable blades
CH/170 confirmed (2011)
BS 5194-3:1985 Surgical instruments -- Specification for dissecting forceps
CH/170 confirmed (2011)
BS 4274-1:2003 Visual acuity test types -- Test charts for
clinical determination of distance visual acuity. Specification
CH/172/6 confirmed (2011)
BS 3970-2:1991 Sterilizing and disinfecting equipment for
medical products -- Specification for steam sterilizers for aqueous fluids in sealed rigid
containers
CH/198 confirmed (2011)
BS 3970-5:1990 Sterilizing and disinfecting equipment for medical products -- Specification for low
temperature steam disinfectors
CH/198 confirmed (2011)
BS 2646-1:1993 Autoclaves for sterilization in laboratories --
Specification for design, construction, safety
and performance
CH/198 confirmed (2011)
BS 2646-5:1993 Autoclaves for sterilization in laboratories --
Methods of test for function and performance
CH/198 confirmed (2011)
BS 2646-2:1990 Autoclaves for sterilization in laboratories -- Guide to planning and installation
CH/198 confirmed (2011)
BS 2646-3:1993 Autoclaves for sterilization in laboratories --
Guide to safe use and operation
CH/198 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 104 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 2646-4:1991 Autoclaves for sterilization in laboratories --
Guide to maintenance
CH/198 confirmed (2011)
BS 8599-1:2011 Workplace first aid kits -- Specification for the contents of workplace first aid kits
CH/240 current
BS 5724-3.26:1990 Medical electrical equipment. Particular
requirements for performance -- Method for declaring parameters for ultrasonic diagnostic
equipment using test objects
CH/62/2 confirmed (2011)
BS 6196:1989 Specification for sterile epidural catheters
and introducer needles for single use
CH/84 confirmed (2011)
BS 6043-2.12:1994 Methods of sampling and test for carbonaceous materials used in aluminium
manufacture. Electrode coke. --
Determination of particle size distribution of fine coke
CII/24 confirmed (2011)
BS 6043-1.7:1988 Methods of sampling and test for carbonaceous materials used in aluminium
manufacture. Electrode pitch --
Determination of apparent density (buoyancy method)
CII/24 confirmed (2011)
BS 6043-1.12:1994 Method of sampling and test for
carbonaceous materials used in aluminium manufacture. Electrode pitch. --
Determination of mesophase content
CII/24 confirmed (2011)
BS 5072-1:1974 Methods of test for sodium fluoride for
industrial use -- Determination of water-
insoluble matter
CII/24 confirmed (2011)
BS 4993-1:1974 Methods of test for aluminium fluoride for
industrial use -- Determination of fluorine
content
CII/24 confirmed (2011)
BS 4993-3:1974 Methods of test for aluminium fluoride for
industrial use -- Determination of silica
content
CII/24 confirmed (2011)
BS 5072-2:1974 Methods of test for sodium fluoride for
industrial use -- Determination of moisture content
CII/24 confirmed (2011)
BS 5072-3:1975 Methods of test for sodium fluoride for
industrial use -- Determination of fluorine content
CII/24 confirmed (2011)
BS 4993-2:1974 Methods of test for aluminium fluoride for
industrial use -- Determination of iron content
CII/24 confirmed (2011)
BS 4140-0:1986 Methods of test for aluminium oxide --
General introduction
CII/24 confirmed (2011)
BS 5050:1974 Methods of test for cryolite CII/24 confirmed (2011)
BS 5688-0:1986 Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude
sodium borates for industrial use -- General
introduction
CII/26 confirmed (2011)
BS 6392-3:1983 Testing of ethanol for industrial use --
Method for determination of carbonyl
compounds content present in moderate amounts (titrimetric method)
CII/26 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 105 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 6092-11:1981 Methods of sampling and test for sodium and
potassium silicates for industrial use -- Determination of chloride content of sodium
metasilicate
CII/26 confirmed (2011)
BS 6392-7:1983 Testing of ethanol for industrial use -- Method for determination of methanol
content [0.10% (V/V) to 1.50% (V/V)]
(visual colorimetric method)
CII/26 confirmed (2011)
BS 6092-12:1981 Methods of sampling and test for sodium and
potassium silicates for industrial use -- Limit test for sulphate content of sodium
metasilicate
CII/26 confirmed (2011)
BS 6392-2:1983 Testing of ethanol for industrial use -- Method for determination of carbonyl
compounds content present in small amounts
(photometric method)
CII/26 confirmed (2011)
BS 6392-6:1983 Testing of ethanol for industrial use --
Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)]
(photometric method)
CII/26 confirmed (2011)
BS 7319-12:1990 Analysis of sodium chloride for industrial use -- Methods for determination of anti-caking
additives content of salt for food use
CII/26 confirmed (2011)
BS 6092-10:1981 Methods of sampling and test for sodium and potassium silicates for industrial use --
Determination of matter insoluble in water
CII/26 confirmed (2011)
BS 6392-1:1983 Testing of ethanol for industrial use -- Method for detection of alkalinity or
determination of acidity to phenolphthalein
CII/26 confirmed (2011)
BS 6075-14:1981 Methods of sampling and test for sodium hydroxide for industrial use -- Determination
of matter insoluble in water
CII/26 confirmed (2011)
BS 6092-0:1981 Methods of sampling and test for sodium and potassium silicates for industrial use --
General introduction
CII/26 confirmed (2011)
BS 6075-12:1981 Methods of sampling and test for sodium
hydroxide for industrial use -- Determination
of copper content
CII/26 confirmed (2011)
BS 1595-1:1986 Propan-2-ol (isopropyl alcohol) for industrial
use -- Specification for propan-2-ol (isopropyl
alcohol)
CII/26 confirmed (2011)
BS 6070-7:1981 Methods of sampling and test for sodium
carbonate for industrial use -- Determination of copper content
CII/26 confirmed (2011)
BS 6070-0:1981 Methods of sampling and test for sodium
carbonate for industrial use -- General introduction
CII/26 confirmed (2011)
BS 6075-0:1981 Methods of sampling and test for sodium
hydroxide for industrial use -- General introduction
CII/26 confirmed (2011)
BS 6392-4:1983 Testing of ethanol for industrial use --
Method for determination of aldehydes content
CII/26 confirmed (2011)
BS 6392-9:1983 Testing of ethanol for industrial use --
Method for determination of permanganate time
CII/26 confirmed (2011)
BS 6392-8:1983 Testing of ethanol for industrial use -- Method for determination of esters content
CII/26 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 106 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 6392-5:1983 Testing of ethanol for industrial use --
Method of test for miscibility with water
CII/26 confirmed (2011)
BS 1941:1993 Specification for 4-methylpentan-2-one (isobutyl methyl ketone) for industrial use
CII/26 confirmed (2011)
BS 1595-2:1984 Propan-2-ol (isopropyl alcohol) for industrial
use -- Methods of test
CII/26 confirmed (2011)
BS 1940:1987 Specification for butanone (ethyl methyl
ketone) for industrial use
CII/26 confirmed (2011)
BS 2713:1966 Specification for 2-ethoxyethanol (ethylene glycol monoethyl ether)
CII/26 confirmed (2011)
BS 662-3:1979 Carbon disulphide for industrial use --
Additional methods of test
CII/26 confirmed (2011)
BS 576-2:1988 Acetic acid for industrial use -- Methods of
test for acetic acid
CII/26 confirmed (2011)
BS 6376-3:1989 Reagents for chemical analysis -- Specifications (second series)
CII/26 confirmed (2011)
BS 576-1:1988 Acetic acid for industrial use. -- Specification
for acetic acid
CII/26 confirmed (2011)
BS 6392-0:1983 Testing of ethanol for industrial use --
General introduction
CII/26 confirmed (2011)
BS 508-1:1986 Butan-1-ol for industrial use -- Specification for butan-1-ol
CII/26 confirmed (2011)
BS 3993:1966 Specification for hydrochloric acid,
commercial types 1 and 2
CII/26 confirmed (2011)
BS 506-1:1987 Methanol for industrial use. -- Specification
for methanol
CII/26 confirmed (2011)
BS 509-1:1987 Acetone for industrial use -- Specification for acetone
CII/26 confirmed (2011)
BS 5962:1980 Specifications for naphthalene (including test
methods)
CII/26 confirmed (2011)
BS 662-1:1979 Carbon disulphide for industrial use. --
Specification
CII/26 confirmed (2011)
BS 1835:1991 Specification for 2-ethylhexan-1-ol for industrial use
CII/26 confirmed (2011)
BS 1994:1993 Specification for dichloromethane (methylene
chloride)
CII/26 confirmed (2011)
BS 4583:1991 Methods of test for higher alcohols for
industrial use
CII/26 confirmed (2011)
BS 3674:1981 Specification for sodium carbonate (technical grades)
CII/26 confirmed (2011)
BS 4130:1984 Specification for sodium hydroxide (technical
grades)
CII/26 confirmed (2011)
BS 4105:1990 Specification for liquid carbon dioxide,
industrial
CII/26 confirmed (2011)
BS 4774:1972 Methods of test for chloroform for industrial use
CII/26 confirmed (2011)
BS 508-2:1984 Butan-1-ol for industrial use -- Methods of
test
CII/26 confirmed (2011)
BS 551:1990 Specification for butyl acetate for industrial
use
CII/26 confirmed (2011)
BS 553:1990 Specification for ethyl acetate for industrial use
CII/26 confirmed (2011)
BS 3591:1985 Specification for industrial methylated spirits CII/26 confirmed (2011)
BS 506-2:1984 Methanol for industrial use -- Methods of test CII/26 confirmed (2011)
BS 4341:Addendum No. 1:1971
Methods of test for formic acid CII/26 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 107 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 509-2:1984 Acetone for industrial use -- Methods of test CII/26 confirmed (2011)
BS 507:1985 Specification for ethanol for industrial use CII/26 confirmed (2011)
BS 579:1957 Specification for diethyl ether (technical) CII/26 confirmed (2011)
BS 5634:1978 Methods of test for potassium hydroxide CII/26 confirmed (2011)
BS 4835:1973 Methods of test for plasticizer esters CII/26 confirmed (2011)
BS 4366:1993 Specification for industrial nitrogen CII/26 confirmed (2011)
BS 1834:1968 Specification for isopropyl acetate CII/26 confirmed (2011)
BS 4364:1993 Specification for industrial oxygen CII/26 confirmed (2011)
BS 2068:1970 Specification for acetic anhydride CII/26 confirmed (2011)
BS 3984:1982 Specification for sodium silicates CII/26 confirmed (2011)
BS 549:1970 Specification for diacetone alcohol CII/26 confirmed (2011)
BS 3947:1976 Specification for liquid chlorine CII/26 confirmed (2011)
BS 4341:1968 Methods of test for formic acid CII/26 confirmed (2011)
BS 552:1970 Specification for amyl acetate CII/26 confirmed (2011)
BS 4427-14:1989 Methods of test for sodium tripolyphosphate
(pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate)
for industrial use -- Condensed phosphates for industrial use (including foodstuffs):
determination of chloride content
CII/34 confirmed (2011)
BS 4427-3:1989 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium
pyrophosphate (tetrasodium pyrophosphate)
for industrial use -- Condensed phosphates for industrial use (including foodstuffs):
determination of iron content
CII/34 confirmed (2011)
BS 4427-11:1983 Methods of test for sodium tripolyphosphate
(pentasodium triphosphate) and sodium
pyrophosphate (tetrasodium pyrophosphate) for industrial use -- Separation by column
chromatography and determination of the different phosphate forms
CII/34 confirmed (2011)
BS 4427-1:1969 Methods of test for sodium tripolyphosphate
(pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate)
for industrial use -- Determination of matter insoluble in water in sodium tripolyphosphate
CII/34 confirmed (2011)
BS 4427-6:1974 Methods of test for sodium tripolyphosphate
(pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate)
for industrial use -- Estimation of
pyrophosphate content of sodium pyrophosphate
CII/34 confirmed (2011)
BS 4427-5:1974 Methods of test for sodium tripolyphosphate
(pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate)
for industrial use -- Determination of particle size distribution
CII/34 confirmed (2011)
BS 4427-4:1969 Methods of test for sodium tripolyphosphate
(pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate)
for industrial use -- Determination of loss on ignition
CII/34 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 108 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 6829-2.1:1988 Analysis of surface active agents (raw
materials). Alkane sulphonates -- Method for determination of total alkaline sulphonates
content
CII/34 confirmed (2011)
BS 3762-3.10:1989 Analysis of formulated detergents -- Methods for determination of short-chain
alkylbenzenesulphonates content
CII/34 confirmed (2011)
BS 3762-3.24:1988 Analysis of formulated detergents -- Method for determination of low molecular mass
alcohols content
CII/34 confirmed (2011)
BS 1715-2.4:1989 Analysis of soaps. Quantitative test methods -- Method for determination of free fatty
acids content
CII/34 confirmed (2011)
BS 3762-3.25:1989 Analysis of formulated detergents -- Methods for determination of water and volatile
matter content
CII/34 confirmed (2011)
BS 3762-4.1:1989 Analysis of formulated detergents -- Method
for determination of clear point of liquid
detergents
CII/34 confirmed (2011)
BS 3762-3.15:1985 Analysis of formulated detergents -- Method
for estimation of carboxymethylcellulose
content
CII/34 confirmed (2011)
BS 3762-3.11:1989 Analysis of formulated detergents -- Method
for determination of free formaldehyde content
CII/34 confirmed (2011)
BS 1715-2.9:1990 Analysis of soaps. Quantitative test methods.
-- Method for determination of EDTA content
CII/34 confirmed (2011)
BS 3762-3.14:1985 Analysis of formulated detergents -- Method for determination of carbonate content
CII/34 confirmed (2011)
BS 3762-3.16:1985 Analysis of formulated detergents -- Method
for determination of chloride content
CII/34 confirmed (2011)
BS 3762-3.12:1985 Analysis of formulated detergents -- Method
for determination of ammonia content
CII/34 confirmed (2011)
BS 3762-2:1989 Analysis of formulated detergents -- Qualitative test methods
CII/34 confirmed (2011)
BS 1545:1990 Specification for liquid toilet soap CII/34 confirmed (2011)
BS 1912:1990 Specification for soap flakes CII/34 confirmed (2011)
BS 1914:1990 Specification for toilet soap CII/34 confirmed (2011)
BS 4405:1990 Specification for liquid soap CII/34 confirmed (2011)
BS 1911:1990 Specification for hard soap CII/34 confirmed (2011)
BS 1913:1990 Specification for soft soap CII/34 confirmed (2011)
BS 7959-2:2000 Materials used for the control of liquid
spillages -- Determination of water repellency
or buoyancy for hydrophobic (oil sorbent) materials
CII/63 confirmed (2011)
BS 7843-2:2012 Acquisition and management of
meteorological precipitation data from a raingauge network -- Code of practice for
operating raingauges and managing precipitation data
CPI/113 current
BS 7843-1:2012 Acquisition and management of
meteorological precipitation data from a raingauge network -- Guide for the design,
development and review of a raingauge network
CPI/113 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 109 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 1339-3:2004 Humidity -- Guide to the measurement of
humidity
CPI/29 confirmed (2011)
BS 8452:2010 Use of clamp-on (externally mounted) ultrasonic flow-metering techniques for fluid
applications. Guide
CPI/30/5 current
BS 1853-2:1995 Tubular fluorescent lamps for general lighting service -- Specification for lamps used in the
United Kingdom not included in BS EN 60081, BS EN 60901, BS EN 61195 and BS
EN 61199
CPL/34/1 confirmed (2011)
BS 1376:1974 Specification for colours of light signals CPL/34/7 confirmed (2011)
BS 5415-2.2:Supplement No.
1:1986
Safety of electrical motor-operated industrial and commercial cleaning appliances.
Particular requirements -- Specification for type H industrial vacuum cleaners for dusts
hazardous to health
CPL/61/10 confirmed (2011)
BS 4995:1973 Recommendations for measurement of the veiling glare index of lenses and optical
systems
CPW/172 confirmed (2011)
BS 4793:1972 Recommendations for specifying the optical performance of lenses for television cameras
CPW/172 confirmed (2011)
BS 4779:1971 Recommendations for measurement of the optical transfer function of optical devices
CPW/172 confirmed (2011)
BS 5109:1974 Glossary of terms used in assessing the
performance of optical devices and systems
CPW/172 confirmed (2011)
BS 4301:1991 Recommendations for preparation of drawings for optical elements and systems
CPW/172 confirmed (2011)
BS 5550-5.4.1:1986 Cinematography. Common to more than one gauge. Sound -- Code of Practice for the
identification of systems for synchronization
of unperforated audio tape with motion-picture film and videotape
CPW/36 confirmed (2011)
BS 5550-6.4:1980 Cinematography. Television usage --
Recommendations for the density range, contrast and colour balance of films and
slides for colour television
CPW/36 confirmed (2011)
BS 5550-7.5.4:1981 Cinematography. Production and presentation. Film and television location
lighting -- Specification for single pole high current plugs and socket connectors
CPW/4 current
BS 3944-1:1992 Colour and diffusion filter material for
theatre, television and similar entertainment purposes. -- Specification for flammability
and dimensional stability
CPW/4 confirmed (2011)
BS 7909:2011 Code of practice for temporary electrical systems for entertainment and related
purposes
CPW/4 current
BS 5577:1999 Specification for table cutlery with non-
metallic handles
CW/17 confirmed (2011)
BS 6748:1986+A1:201
1
Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware
and vitreous enamel ware
CW/29 current
BS 4034:1990 Specification for vitrified hotelware CW/29 confirmed (2011)
BS 5416:1990 Specification for china tableware CW/29 confirmed (2011)
BS 3788:1984 Specification for tin coated finish on culinary utensils
CW/9 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 110 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 7000-6:2005 Design management systems -- Managing
inclusive design. Guide
DES/1 confirmed (2011)
BS 5760-8:1998 Reliability of systems, equipment and components -- Guide to assessment of
reliability of systems containing software
DS/1 confirmed (2011)
PD 6663:2000 Guidelines to BS EN 12973. Value management. Practical guidance to its use
and intent
DS/1 confirmed (2011)
BS 2045:1965 Preferred numbers E/- confirmed (2011)
BS 2742M:1960 Miniature smoke chart EH/2/1 confirmed (2011)
BS 2742C:1957 Ringelmann chart EH/2/1 confirmed (2011)
BS 6068-2.18:1986 Water quality. Physical, chemical and
biochemical methods -- Methods for the determination of easily liberatable cyanide
EH/3/2 confirmed (2011)
BS 6068-2.34:1988 Water quality. Physical, chemical and
biochemical methods -- Method for the determination of the chemical oxygen
demand
EH/3/2 confirmed (2011)
BS 6068-2.17:1986 Water quality. Physical, chemical and biochemical methods -- Methods for
determination of total cyanide
EH/3/2 confirmed (2011)
BS 667:2005 Illuminance meters. Requirements and test methods
EL/1 confirmed (2011)
BS 7920:2005 Luminance meters. Requirements and test methods
EL/1 confirmed (2011)
BS 8456:2005 Code of practice for design and installation of
directional sounder evacuation systems
EL/1/1 confirmed (2011)
BS 7827:2011 Code of practice for designing, specifying, maintaining and operating emergency sound
systems at sports venues
EPL/100 current
BS 6513-5:1987 Wideband cabled distribution systems --
Recommendations for one-way and
interactive data services
EPL/100 confirmed (2011)
BS 7594:2011 Code of practice for audio-frequency
induction-loop systems (AFILS)
EPL/100 current
BS 6513-2:1984 Wideband cabled distribution systems -- Methods of measurement
EPL/100 confirmed (2011)
BS 6513-1:1984 Wideband cabled distribution systems --
Glossary of terms
EPL/100 confirmed (2011)
PD 60065:2001 Interpretation sheets for BS EN 60065:1998.
Audio, video and similar electronic apparatus.
Safety requirements
EPL/108 replaced by BS EN
60065:2002+A12:
2011
BS 7580-2:1997 Specification for the verification of sound
level meters -- Shortened procedure for type
2 sound level meters
EPL/29 confirmed (2011)
BS 3539:1986 Specification for sound level meters for the
measurement of noise emitted by motor vehicles
EPL/29 confirmed (2011)
BS 7580-1:1997 Specification for the verification of sound
level meters -- Comprehensive procedure
EPL/29 confirmed (2011)
PD 6545:2005 Intended use of human head and ear simulators-guide
EPL/29 confirmed (2011)
BS 9074 N007:1978 Detail specification for fixed polystyrene film dielectric extended foil capacitors.
Rectangular non-metallic case, unidirectional
terminations. Full plus additional assessment level
EPL/40X replaced by BS 9074 N007:1981,
due to existing
approvals
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 111 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 9070-3:1970 Specification for fixed capacitors of assessed
quality: generic data and methods of test -- Tantalum electrolytic capacitors
EPL/40X replaced by BS
CECC 30800:1978, due
to existing
approvals
BS 9121:1988 Blank detail specification for radio
interference suppression filters of assessed
quality. Basic and full assessment levels
EPL/40X partially replaced
by BS EN
133000:1997
BS 9120:1988 Specification for radio interference
suppression filters of assessed quality: generic data and methods of test
EPL/40X partially replaced
by BS EN 133000:1997
BS 9210 N0009-
1:1978
Detail specification for radio frequency
connectors (series SMC) -- Full assessment level
EPL/46 confirmed (2011)
BS 9210:1984 Specification for radio frequency connectors
of assessed quality: generic data and methods of test
EPL/46 replaced by BS
CECC 22000:1980 due to existing
approvals
BS 9210 N007-1:1976
Detail specification for radio frequency connectors (type SMB) -- Full assessment
level
EPL/46 confirmed (2011)
BS 9220:1971 Specification for rigid waveguide tubing of assessed quality: generic data and methods
of test
EPL/46 confirmed (2011)
BS 4319-1:1968 Methods of measurement of the electrical
properties of electronic tubes and valves
(excluding microwave devices) -- Essential conditions for measuring equivalent input
and output admittances
EPL/47 confirmed (2011)
BS 4478:1969 Methods of measurement of intermodulation products in electronic tubes or valves
intended for use in colour television transposers
EPL/47 confirmed (2011)
BS 448-2:1981 Dimensions of electronic tubes and valves --
Specification for dimensions of United Kingdom electronic tubes
EPL/47 confirmed (2011)
BS 4789:1972 Specification for ceramic components for use
in envelopes for electronic tubes
EPL/47 confirmed (2011)
BS 6600-10:1985 Outline dimensions of transformers and
inductors for use in telecommunication and
electronic equipment -- Specification for the outline dimensions of transformers and
inductors using the Q range of C-cores
EPL/51 confirmed (2011)
BS 6600-1:1987 Outline dimensions of transformers and
inductors for use in telecommunication and
electronic equipment -- Specification for the outline dimensions of transformers and
inductors using YEI-1 laminations
EPL/51 confirmed (2011)
BS 9751 N0001:1980
Detail specification for fixed insulated (unshielded) radio frequency inductors. Wire
wound on ferrite, iron dust or phenolic cylindrical former. Full assessment level
EPL/51 confirmed (2011)
BS 5347:1976 Specification for silicon-iron strip-wound
cores for use in transformers and inductors for telecommunications and electronic
equipment
EPL/51 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 112 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 9753:1986 Sectional specification for variable r.f. type
inductors of assessed quality for use in electronic equipment for capability approval
EPL/51 confirmed (2011)
BS 9721:1985 Sectional specification for signal transformers
of assessed quality for use in electronic equipment for capability approval
EPL/51 confirmed (2011)
BS 9727:1985 Sectional specification for power
transformers of assessed quality for use in electronic equipment for capability approval
EPL/51 confirmed (2011)
BS 9733:1985 Sectional specification for pulse transformers
of assessed quality for use in electronic equipment for capability approval
EPL/51 confirmed (2011)
BS 9734:1978 Sectional specification for pulse transformers
of assessed quality for use in electronic equipment: full assessment level
EPL/51 confirmed (2011)
BS 9741:1986 Sectional specification for inductors of assessed quality for use in electronic
equipment for capability approval
EPL/51 confirmed (2011)
BS 9751:1979 Blank detail specification for fixed insulated (unshielded) r.f. inductors at the full
assessment level
EPL/51 confirmed (2011)
BS 2857:1976 Specification for nickel-iron transformer and choke laminations
EPL/51 confirmed (2011)
BS 4309:1968 Methods of measuring the performance of
laboratory electric resistance furnaces
EPL/66 confirmed (2011)
BS 2648:1955 Performance requirements for electrically-
heated laboratory drying ovens
EPL/66 confirmed (2011)
BS 3224-1:1988 Lighting fittings for civil land aerodromes -- Specification for lighting units for use in
precision approach path indicator systems
EPL/97 confirmed (2011)
BS 3224-4:1988 Lighting fittings for civil land aerodromes -- Specification for elevated lighting units
EPL/97 confirmed (2011)
BS 3224-6:1988 Lighting fittings for civil land aerodromes --
Specification for obstacle lighting units
EPL/97 confirmed (2011)
BS 4168-1:1981 Hexagon socket screws and wrench keys:
metric series -- Specification for hexagon
socket head cap screws
FME/9 replaced by BS EN
ISO 4762:1998
BS 7371-
6:1998+A1:2011
Coatings on metal fasteners -- Specification
for hot dipped galvanized coatings
FME/9 current
BS 3673-4:1977 Specification for spring retaining rings -- Carbon steel circlips - metric series
FME/9 confirmed (2011)
BS 7371-8:2011 Coatings on metal fasteners -- Specification
for sherardized coatings
FME/9 current
BS 3673-2:1965 Specification for spring retaining rings --
Carbon steel E clips
FME/9 confirmed (2011)
BS 3673-3:1968 Specification for spring retaining rings -- Carbon steel C clips
FME/9 confirmed (2011)
BS 4895:1981 Specification for semi-tubular rivets for
general purpose use
FME/9 confirmed (2011)
BS 8572:2011 Procurement of facility-related services.
Guide
FMW/1 current
BS 5839-9:2011 Fire detection and fire alarm systems for buildings -- Code of practice for the design,
installation, commissioning and maintenance of emergency voice communication systems
FSH/12/5 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 113 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 5306-1:2006 Code of practice for fire extinguishing
installations and equipment on premises -- Hose reels and foam inlets
FSH/14 confirmed (2011)
BS 6266:2011 Fire protection for electronic equipment
installations. Code of practice
FSH/14 current
BS 5306-0:2011 Fire protection installations and equipment on premises -- Guide for selection of installed
systems and other fire equipment
FSH/18 current
BS 9252:2011 Components for residential sprinkler systems.
Specification and test methods for residential
sprinklers
FSH/18/2 current
BS 7944:1999 Type 1 heavy duty fire blankets and type 2
heavy duty heat protective blankets
FSH/2 confirmed (2011)
BS 7867:1997 Specification for portable fire extinguishers for use in aircraft
FSH/2 confirmed (2011)
BS 476-7:1997 Fire tests on building materials and
structures -- Method of test to determine the classification of the surface spread of flame
of products
FSH/21 confirmed (2011)
BS 476-23:1987 Fire tests on building materials and structures -- Methods for determination of
the contribution of components to the fire resistance of a structure
FSH/22 confirmed (2011)
BS 476-21:1987 Fire tests on building materials and
structures -- Methods for determination of the fire resistance of loadbearing elements of
construction
FSH/22 confirmed (2011)
BS 476-31.1:1983 Fire tests on building materials and structures -- Method of measurement under
ambient temperature conditions
FSH/22 confirmed (2011)
PD 7974-6:2004 The application of fire safety engineering priciples to fire safety design of buildings --
Human factors. Life safety strategies. Occupant evacuation, behaviour and
condition (Sub-system 6)
FSH/24 confirmed (2011)
PD 7974-1:2003 Application of fire safety engineering principles to the design of buildings --
Initiation and development of fire within the enclosure of origin (Sub-system 1)
FSH/24 confirmed (2011)
PD 7974-4:2003 Application of fire safety engineering
principles to the design of buildings -- Detection of fire and activation of fire
protection systems. (Sub-system 4)
FSH/24 confirmed (2011)
PD 7974-3:2011 Application of fire safety engineering principles to the design of buildings --
Structural response and fire spread beyond the enclosure of origin
FSH/24 current
PD 7974-0:2002 Application of fire safety engineering
principles to the design of buildings -- Guide to design framework and fire safety
engineering procedures
FSH/24 confirmed (2011)
BS 4422:2005 Fire. Vocabulary FSH/9 confirmed (2011)
BS 4875-7:2006 Strength and stability of furniture -- Domestic and contract storage furniture. Performance
requirements
FW/0/2 confirmed (2011)
BS 8480:2006 Medical devices. Chairs with electrically
operated support surfaces. Requirements
FW/0/2 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 114 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS
8509:2008+A1:2011
Childrens beds for domestic use. Safety
requirements and test methods
FW/0/2 current
BS 6807:2006 Methods of test for assessment of ignitability
of mattresses, upholstered divans and upholstered bed bases with flaming types of
primary and secondary sources of ignition
FW/6 confirmed (2011)
BS 5852-1:1979 Fire tests for furniture -- Methods of test for the ignitability by smokers' materials of
upholstered composites for seating
FW/6 confirmed (2011)
BS 5852-2:1982 Fire tests for furniture -- Methods of test for the ignitability of upholstered composites for
seating by flaming sources
FW/6 confirmed (2011)
BS 7176:2007+A1:201
1
Specification for resistance to ignition of upholstered furniture for non-domestic
seating by testing composites
FW/6 current
BS 5852:2006 Methods of test for assessment of the
ignitability of upholstered seating by
smouldering and flaming ignition sources
FW/6 confirmed (2011)
BS
7177:2008+A1:201
1
Specification for resistance to ignition of
mattresses, mattress pads, divans and bed
bases
FW/6 current
BS 10500:2011 Specification for an anti-bribery management
system (ABMS)
G/3 current
BS 4727-2:Group 12:1990
Glossary of electrotechnical, power, telecommunication, electronics, lighting and
colour terms. Terms particular to power engineering -- Telecontrol terminology
GEL/1 confirmed (2011)
BS 2572:1990 Specification for phenolic laminated sheet
and epoxy cotton fabric laminated sheet
GEL/15 partially replaced
by BS EN 60893-3-4:1995
BS 3953:1990 Specification for synthetic resin bonded
woven glass fabric laminated sheet
GEL/15 partially replaced
by BS EN 60893-2:1995, BS EN
60893-3-3:1995, BS EN 60893-3-
6:1995 and BS EN
60893-3-7:1995
PD 2379:2005 Register of colours of manufacturers'
identification threads for electric cables and
cords. Tenth Edition
GEL/20 confirmed (2011)
BS 7870-3.12:2011 LV and MV polymeric insulated cables for use
by distribution and generation utilities -- Specification for distribution cables of rated
voltage 0.6/1 kV. XLPE insulated combined
neutral and earth copper wire concentric cables with copper or aluminium conductors,
having low emission of smoke and corrosive gases when affected by fire
GEL/20/16 current
BS 7870-3.50:2011 LV and MV polymeric insulated cables for use
by distribution and generation utilities -- Specification for distribution cables of rated
voltage 0.6/1 kV. XLPE insulated, copper wire waveform or helical concentric cables with
solid aluminium conductors, having low
emission of smoke and corrosive gases when affected by fire
GEL/20/16 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 115 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 7870-3.22:2011 LV and MV polymeric insulated cables for use
by distribution and generation utilities -- Specification for distribution cables of rated
voltage 0.6/1 kV. XLPE insulated split
concentric cables with copper or aluminium conductors, having low emission of smoke
and corrosive gases when affected by fire
GEL/20/16 current
BS 7870-3.11:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities --
Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated combined
neutral and earth copper wire concentric cables with copper or aluminium conductors
GEL/20/16 current
BS 7870-3.40:2011 LV and MV polymeric insulated cables for use
by distribution and generation utilities -- Specification for distribution cables of rated
voltage 0.6/1 kV. XLPE insulated, copper wire
waveform concentric cables with solid aluminium conductors
GEL/20/16 current
BS 7870-4.11:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities --
Specification for distribution cables with
extruded insulation for rated voltages of 11 kV and 33 kV. Single-core 33 kV lead
sheathed cables
GEL/20/16 current
BS 7870-3.21:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities --
Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split
concentric cables with copper or aluminium
conductors
GEL/20/16 current
BS 7870-4.10:2011 LV and MV polymeric insulated cables for use
by distribution and generation utilities -- Specification for distribution cables with
extruded insulation of rated voltages of 11 kV
to 33 kV. Single-core 11 kV to 33 kV cables
GEL/20/16 current
BS 7870-4.20:2011 LV and MV polymeric insulated cables for use
by distribution and generation utilities --
Specification for distribution cables with extruded insulation for rated voltages of 11
kV to 33 kV. Three-core 11 kV cables
GEL/20/16 current
BS 7870-5:2011 LV and MV polymeric insulated cables for use
by distribution and generation utilities --
Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV
for overhead distribution
GEL/20/16 current
BS 7870-2:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities --
Methods of test
GEL/20/16 current
BS 7870-1:2011 LV and MV polymeric insulated cables for use
by distribution and generation utilities --
General
GEL/20/16 current
BS 8436:2011 Electric cables. Specification for 300/500 V
screened electric cables having low emission
of smoke and corrosive gases when affected by fire, for use in walls, partitions and
building voids. Multicore cables
GEL/20/17 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 116 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 7917:1999 Elastomer insulated fire resistant (limited
circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units.
Requirements and test methods
GEL/20/6 confirmed (2011)
BS 6883:1999 Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units.
Requirements and test methods
GEL/20/6 confirmed (2011)
BS 8435:2005 Small craft. Reserve flotation. Boats up to six metres length of hull
GME/33 confirmed (2011)
BS 5809:1980 Specification for safety and efficiency of the
gas heating equipment of commercial dishwashing machines
GSE/19 confirmed (2011)
BS 1179-6:1980 Glossary of terms used in the gas industry --
Combustion and utilization including installation at consumers' premises
GSE/2 confirmed (2011)
BS 5991:2006 Specification for indirect gas fired forced convection air heaters with rated heat inputs
greater than 330 kW but not exceeding 2
MW for industrial and commercial space heating. Safety and performance
requirements (excluding electrical requirements) (2nd family gases)
GSE/20/4 confirmed (2011)
BS 5990:2006 Specification for direct gas-fired forced
convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2
MW for industrial and commercial space heating. Safety and performance
requirements (excluding electrical
requirements) (2nd family gases)
GSE/20/4 confirmed (2011)
BS 7461:1991 Specification for electrically operated
automatic gas shut-off valves fitted with
throughput adjusters, proof of closure switches, closed position indicator switches
or gas flow control
GSE/22 confirmed (2011)
BS 6047-1:1981 Flame supervision devices for domestic, commercial and catering gas appliances --
Specification for heat sensitive type
GSE/22 confirmed (2011)
BS 5986:1980 Specification for electrical safety and
performance of gas fired space heating
appliances with inputs 60 kW to 2 MW
GSE/22 confirmed (2011)
BS 1552:1995 Specification for open bottomed taper plug
valves for 1st, 2nd and 3rd family gases up
to 200 mbar
GSE/22 confirmed (2011)
BS 7462:1991 Specification for electrical safety of domestic
gas appliances
GSE/22 confirmed (2011)
BS 2977:1958 Domestic lighting appliances for use with liquefied petroleum gases
GSE/24 confirmed (2011)
BS 8660-1:2011 Gas-fired micro-cogeneration appliances of
rated thermal input not exceeding 70 kW net -- Specification for selection, installation,
inspection, commissioning, servicing and maintenance of Stirling engine micro-
cogeneration appliances
GSE/30 current
BS 6400-2:2006 Specification for installation, exchange, relocation and removal of gas meters with a
maximum capacity not exceeding 6 m$u3/h -- Medium pressure (2nd family gases)
GSE/30 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 117 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 6644:2011 Specification for the installation and
maintenance of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8
MW (net) (2nd and 3rd family gases)
GSE/30 current
BS 6896:2011 Specification for installation and maintenance of gas-fired overhead radiant heaters for
industrial and commercial heating (2nd and
3rd family gases)
GSE/30 current
BS 6230:2011 Specification for installation of gas-fired
forced convection air heaters for commercial and industrial space heating (2nd and 3rd
family gases)
GSE/30 current
BS 7624:2004 Installation and maintenance of domestic direct gas-fired tumble dryers of up to 6 kW
heat input (2nd and 3rd family gases).
Specification
GSE/30/-/20
confirmed (2011)
BS 715:2005 Specification for metal flue boxes for gas-
fired appliances not exceeding 20 kW
GSE/4 confirmed (2011)
BS 669-2:1997 Flexible hoses, end fittings and sockets for gas burning appliances -- Specification for
corrugated metallic flexible hoses, covers, end fittings and sockets for catering
appliances burning 1st, 2nd and 3rd family
gases
GSE/42 confirmed (2011)
BS 7872:2011 Manned security services. Cash and valuables
in transit services (collection and delivery). Code of practice
GW/3 current
BS 8484:2011 Provision of lone worker device (LWD)
services. Code of practice
GW/3 current
BS 8523:2011 Management and operation of warden schemes. Code of practice
GW/3 current
BS 8549:2006 Security consultancy. Code of practice GW/3 confirmed (2011)
BS 1523-1:1967 Glossary of terms used in automatic controlling and regulating systems -- Process
and kinetic control
I/- confirmed (2011)
BS 4783-8:1994 Storage, transportation and maintenance of media for use in data processing and
information storage -- Recommendations for
4 mm and 8 mm helical scan tape cartridges
ICT/-/1 confirmed (2011)
BS 6475:1984 Specification for processor system bus
interface (Eurobus A)
ICT/-/1 confirmed (2011)
BS 6660-1:2005 Guide to setting up and maintaining micrographics and digital imaging units --
Micrographics
IDT/1 confirmed (2011)
BS 5261-1:2000 Copy preparation and proof correction -- Design and layout of documents
IDT/2 confirmed (2011)
BS 8538:2011 Specification for the provision of services relating to the commercialization of
intellectual property rights
IMS/1/1 current
BS 4633 and 4634:1970
Method for the determination of crystallizing point. Method for the determination of
melting point and/or melting range
ISE/102 confirmed (2011)
BS 5443:1977 Recommendations for a standard layout for methods of chemical analysis by gas
chromatography
ISE/102 confirmed (2011)
BS 2511:1970 Methods for the determination of water (Karl Fischer method)
ISE/102 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 118 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 4-1:2005 Structural steel sections -- Specification for
hot-rolled sections
ISE/103 confirmed (2011)
PD 970:2005 Wrought steels for mechanical and allied engineering purposes. Requirements for
carbon, carbon manganese and alloy hot worked or cold finished steels
ISE/105 confirmed (2011)
PD 6635:1999 Non-alloy steel rod for drawing and/or cold
rolling. General purpose rod, rimmed and rimmed substitute low carbon steel rod, rod
for special applications. Requirements and tests
ISE/106 confirmed (2011)
BS 4087:1989 Specification for copper-covered steel wire
for telephone and telegraph purposes
ISE/106 confirmed (2011)
BS 4637:1970 Specification for carbon steel wire for coiled springs (bedding and seating)
ISE/106 confirmed (2011)
BS 1429:1980 Specification for annealed round steel wire for general engineering springs
ISE/106 confirmed (2011)
BS 182:1972 Specification for galvanized line-wire for
telephone and telegraph purposes
ISE/106 confirmed (2011)
BS 4638:1970 Specification for carbon steel wire for zigzag and square-form springs
ISE/106 confirmed (2011)
BS 1052:1980 Specification for mild steel wire for general engineering purposes
ISE/106 confirmed (2011)
BS 7612:1993 Specification for non-circular steel wire for
mechanical springs
ISE/106 confirmed (2011)
BS 183:1972 Specification for general purpose galvanized steel wire strand
ISE/106 confirmed (2011)
BS 4102:1998 Specification for steel wire for general
fencing purposes
ISE/106 confirmed (2011)
BS 2453:1973 Specification for steel wire for spokes ISE/106 confirmed (2011)
BS 3604-2:1991 Steel pipes and tubes for pressure purposes:
ferritic alloy steel with specified elevated temperature properties. -- Specification for
longitudinally arc welded tubes
ISE/107 confirmed (2011)
BS 5383:1986 Specification for material identification of steel, nickel alloy and titanium alloy tubes by
continuous character marking and colour coding of steel tubes
ISE/107 confirmed (2011)
PD 6525-1:1990 Elevated temperature properties for steels for
pressure purposes. -- Stress rupture properties
ISE/107 confirmed (2011)
BS 6582:2000 Continuously hot-dip lead alloy (terne)
coated cold reduced carbon steel flat rolled products
ISE/109 confirmed (2011)
BS 1640-1:1962 Specification for steel butt-welding pipe
fittings for the petroleum industry -- Wrought carbon and ferritic alloy steel fittings
ISE/110 partially replaced
by BS EN 10253-2:2007
PD 6484:1979 Commentary on corrosion at bimetallic
contacts and its alleviation
ISE/NFE/8 confirmed (2011)
BS 8440-2:2005 Health informatics. Medical digital imaging.
Profiles format -- Particular requirements for metadata profiles
IST/35 confirmed (2011)
BS 8441-2:2006 Health informatics. Medical digital imaging
profiles -- “M-IHE6-4.8MIS-CT” CT images stored
IST/35 confirmed (2011)
BS 8440-1:2005 Health informatics. Medical digital imaging.
Profiles format -- General principles
IST/35 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 119 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 8419-2:2005 Interoperability between metadata systems
used for learning, education and training -- Code of practice for the development of
interoperability between application profiles
IST/43 confirmed (2011)
BS 8419-1:2005 Interoperability between metadata systems used for learning, education and training --
Code of practice for the development of
application profiles
IST/43 confirmed (2011)
PD 7506:2005 Linking knowledge management with other
organizational functions and disciplines. A guide to good practice
KMS/1 confirmed (2011)
PD 7504:2005 Knowledge management in the public sector.
A guide to good practice
KMS/1 confirmed (2011)
PD 7501:2003 Managing culture and knowledge. Guide to good practice
KMS/1 confirmed (2010)
PD 7505:2005 Skills for knowledge working. A guide to good practice
KMS/1 confirmed (2011)
PD 7503:2003 Introduction to knowledge management in
construction
KMS/1 confirmed (2010)
PD 7502:2003 Guide to measurements in knowledge management
KMS/1 confirmed (2010)
PD 7500:2003 Knowledge Management. Vocabulary KMS/1 confirmed (2010)
BS 6940-2:1989 Total Access Communication System (T.A.C.S) -- Specification for performance
and tests of the signalling system of mobile
stations
L/-/99 confirmed (2011)
BS 6940-1:1989 Total Access Communication System
(T.A.C.S) -- Specification for performance requirements for mobile stations
L/-/99 confirmed (2011)
BS 1117-2:1964 Specification for bare fine resistance wire for
precision electrical equipment -- Metric units
L/-/99 confirmed (2011)
BS 3467:1962 Method of test for temperature coefficient of resistance of alloy wire for precision resistors
L/-/99 confirmed (2011)
BS 3466:1962 Methods of test for resistance per unit length
of metallic electrical resistance material
L/-/99 confirmed (2011)
BS 115:1995 Specification for metallic resistance materials
for electrical purposes
L/-/99 confirmed (2011)
BS 4462:1969 Guide for the preparation of technical sales literature for measuring instruments and
process control equipment
LBI/1/2 confirmed (2011)
BS 2649-3:1988 Methods for analysis of glass -- Glasses of the potassium oxide-lead oxide-silica type
LBI/1/2 confirmed (2011)
BS 2649-1:1988 Methods for analysis of glass -- Glasses of the soda-lime-magnesia-silica type
LBI/1/2 confirmed (2011)
BS
1922:1987+A2:2011
Specification for glass dispensing measures
for pharmaceutical purposes
LBI/1/2 current
BS 5404-2:1977 Specification for plastics laboratory ware --
Graduated measuring cylinders
LBI/1/2 confirmed (2011)
BS 5404-3:1977 Specification for plastics laboratory ware --
Filter funnels
LBI/1/2 confirmed (2011)
BS 894:1956 Specification for Ubbelohde apparatus for flow and drop points
LBI/1/2 confirmed (2011)
BS 5404-4:1979 Specification for plastics laboratory ware --
Wash bottles
LBI/1/2 confirmed (2011)
BS 572:1985 Specification for interchangeable conical
ground glass joints
LBI/1/2 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 120 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 3108:1980 Specification for limestone for making
colourless glasses
LBI/1/2 confirmed (2011)
BS 5404-1:1976 Specification for plastics laboratory ware -- Beakers
LBI/1/2 confirmed (2011)
BS 6706:1986 Specification for disposable glass serological
pipettes
LBI/1/2 confirmed (2011)
BS 5732:1985 Specification for glass disposable Pasteur
pipettes
LBI/1/2 confirmed (2011)
BS 2701:1956 Specification for Rees-Hugill powder density flask
LBI/1/2 confirmed (2011)
BS 3447:1962 Glossary of terms used in the glass industry LBI/1/2 confirmed (2011)
BS 2761:1983 Specification for spherical ground joints LBI/1/2 confirmed (2011)
BS 2461:1983 Specification for gas washing bottles LBI/1/2 confirmed (2011)
BS 1132:1987 Specification for automatic pipettes LBI/1/2 confirmed (2011)
BS 4791:1985 Specification for calorimeter bombs LBI/1/2 confirmed (2011)
BS 2735:1956 Specification for iodine flasks LBI/1/2 confirmed (2011)
BS 4116-4:1992 Conveyor chains, their attachments and
associated chain wheels. -- Specification for
chains and attachments (British series)
MCE/1 confirmed (2011)
BS 3790:2006 Specification for belt drives. Endless wedge
belts, endless V-belts, banded wedge belts,
banded V-belts and their corresponding pulleys
MCE/10 confirmed (2011)
BS 4548:1987 Specification for synchronous belt drives for industrial applications
MCE/10 replaced by BS ISO 5296:2012
BS 3733:1974 Specification for endless V-belt drives for
agricultural purposes
MCE/10 confirmed (2011)
BS 5540-6:1990 Evaluating particulate contamination of hydraulic fluids -- Method of calibrating liquid
automatic particle-count instruments (using mono-sized latex spheres)
MCE/18 confirmed (2011)
BS 6005:1997 Specification for moulded transparent
polycarbonate bowls used in compressed air filters and lubricators
MCE/18 confirmed (2011)
BS 6361:1988 Specification for three-pin plug connectors
for electrically controlled fluid power equipment
MCE/18 confirmed (2011)
BS 7993:2011 Twin ferrule connectors and associated
tubing for 316 stainless steel systems. Specification and test methods
MCE/18/-/4 current
BS 978-2:Addendum No.
1:1959
Gears for instruments and clockwork mechanisms. Cycloidal type gears. -- Double
circular arc type gears
MCE/5 confirmed (2011)
BS 2007:1975 Specification for circular gear shaving cutters, 1 to 8 metric module, accuracy requirements
MCE/5 confirmed (2011)
BS 2062-2:1960 Specification for gear hobs -- Hobs for gears
for turbine reduction and similar drives
MCE/5 replaced by BS
5221:1975, until international
agreement is reached on
tolerances
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 121 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 2062-1:1959 Specification for gear hobs -- Hobs for
general purposes, 1 d.p. to 20 d.p. inclusive
MCE/5 replaced by BS
5221:1975, until international
agreement is
reached on tolerances
BS 5246:1976 Specification for pinion type cutters for spur
gears - 1 to 8 metric module
MCE/5 confirmed (2011)
BS 2518-1:1954 Specification for rotary form relieved gear
cutters -- Diametral pitch
MCE/5 confirmed (2011)
BS 4582-2:1978 Specification for fine pitch gears (metric module) -- Hobs and cutters
MCE/5 confirmed (2011)
BS 978-1:1968 Specification for fine pitch gears. -- Involute
spur and helical gears
MCE/5 confirmed (2011)
BS 2518-2:1977 Specification for rotary form relieved gear
cutters -- Metric module
MCE/5 confirmed (2011)
BS 6710:1987 Specification for dimensions of chain wheel tooth forming tools
MCE/5 confirmed (2011)
BS 978-2:1952 Specification for fine pitch gears -- Cycloidal
type gears
MCE/5 confirmed (2011)
BS 2697:1976 Specification for rack type gear cutters,
metric module
MCE/5 confirmed (2011)
BS 978-3:1952 Specification for fine pitch gears -- Bevel gears
MCE/5 confirmed (2011)
BS 721-1:1963 Specification for worm gearing -- Imperial
units
MCE/5 confirmed (2011)
BS 721-2:1983 Specification for worm gearing -- Metric units MCE/5 confirmed (2011)
BS 6168:1987 Specification for non-metallic spur gears MCE/5 confirmed (2011)
BS 4082-1:1969 Specification for external dimensions for
vertical in-line centrifugal pumps -- 'I' Type
MCE/6 confirmed (2011)
BS 4082-2:1969 Specification for external dimensions for vertical in-line centrifugal pumps -- 'U' Type
MCE/6 confirmed (2011)
BS 5257:1975 Specification for horizontal end-suction centrifugal pumps (16 bar)
MCE/6 confirmed (2011)
BS 4278:1984 Specification for eyebolts for lifting purposes MHE/1 replaced by BS EN
ISO 3266:2010 and has been
declared
obsolescent
BS 6451:1984 Specification for netting and fibre rope load
restraint systems in surface transport
MHE/16 confirmed (2011)
BS 6756:1986 Specification for fibre rope cargo nets MHE/16 confirmed (2011)
BS 2573-1:1983 Rules for the design of cranes -- Specification for classification, stress calculations and
design criteria for structures
MHE/3 replaced by BS EN 13001-
1:2004+A1:2009, BS EN 13001-
2:2014, BS EN 13001-3-
1:2012+A1:2013,
BS EN 13001-3-2, BS EN 13001-3-3,
BS EN 13001-3-4 and DD CEN/TS
13001-3-5:2010
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 122 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 2573-2:1980 Rules for the design of cranes -- Specification
for classification, stress calculations and design of mechanisms
MHE/3 replaced by BS EN
13001-1:2004+A1:2009,
BS EN 13001-
2:2014, BS EN 13001-3-
1:2012+A1:2013, BS EN 13001-3-2,
BS EN 13001-3-3,
BS EN 13001-3-4 and DD CEN/TS
13001-3-5:2010
BS 5744:1979 Code of practice for safe use of cranes
(overhead/underhung travelling and goliath
cranes, high pedestal and portal jib dockside cranes, manually-operated and light cranes,
container handling cranes and rail-mounted low carriage cranes)
MHE/3/11 partially replaced
by Parts 1 to 3 of
BS 7121. When all parts of BS 7121
have been published BS
5744 will be
revised to cover manually
operated and light cranes only
BS 7121-14:2005 Code of practice for safe use of cranes --
Side boom pipelayers
MHE/3/11 confirmed (2011)
BS 7121-5:2006 Code of practice for safe use of cranes --
Tower cranes
MHE/3/11 confirmed (2011)
BS 8486-2:2007+A1:2011
Examination and test of new lifts before putting into service. Specification for means
of determining compliance with BS EN 81 --
Hydraulic lifts
MHE/4 current
BS 8486-
1:2007+A1:2011
Examination and test of new lifts before
putting into service. Specification for means of determining compliance with BS EN 81 --
Electric lifts
MHE/4 current
BS 6440:2011 Powered vertical lifting platforms having non-enclosed or partially enclosed liftways
intended for use by persons with impaired
mobility. Specification
MHE/4 current
BS 5655-6:2011 Lifts and service lifts -- Code of practice for
the selection, installation and location of new lifts
MHE/4 current
BS 7801:2011 Escalators and moving walks. Code of
practice for safe working on escalators and moving walks
MHE/4 current
BS 4430-2:1969 Recommendations for the safety of powered
industrial trucks -- Operation and maintenance
MHE/7 confirmed (2011)
BS 8439:2005 Continuous handling equipment and systems.
Guide to properties of powders and bulk materials
MHE/9 confirmed (2011)
BS 8905:2011 Framework for the assessment of the
sustainable use of materials. Guidance
MI/1 current
BS 3876-2:1990 Rope rollers, pulleys, mountings and
assemblies for colliery track haulage -- Specification for vertical spindle pulleys,
mountings and assemblies
MRE/1 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 123 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 3876-1:1990 Rope rollers, pulleys, mountings and
assemblies for colliery track haulage -- Specification for parallel barrel rollers,
mountings and assemblies
MRE/1 confirmed (2011)
BS 3876-5:1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage --
Specification for suspended pulley assemblies
and clamps
MRE/1 confirmed (2011)
BS 6680:1985 Specification for flameproof equipment for
diesel engines for use in coal mines and other mines susceptible to firedamp
MRE/1 confirmed (2011)
BS 5620:1995 Specification for 200 A 1100 V flameproof
restrained and bolted plugs and sockets for use in coal mines
MRE/1 confirmed (2011)
BS 1090:1970 Specification for flameproof hand-held
electric drilling machines primarily for use in mines
MRE/1 confirmed (2011)
BS 4878:1973 Specification for large (vee-throated) haulage
rope pulleys for mines and quarries
MRE/1 confirmed (2011)
BS 2593:1974 Specification for rotary drill rods and
tungsten carbide tipped rotary drill bits
MRE/1 confirmed (2011)
BS 3237:1960 Specification for light and medium rolling stock for mineral haulage in mines
MRE/1 confirmed (2011)
BS 4073:1966 Specification for heavy rolling stock for
mineral haulage in mines
MRE/1 confirmed (2011)
BS 3618-7:1973 Glossary of mining terms -- Electrical
engineering and lighting
MRE/1 confirmed (2011)
BS 3618-9:1974 Glossary of mining terms -- Shafts and associated equipment
MRE/1 confirmed (2011)
BS 248:1969 Specification for light rails and fishplates for
use at mines
MRE/1 confirmed (2011)
BS 227:1995 Specification for H-section steel arches for
use in mines
MRE/1 confirmed (2011)
BS 3618-1:1969 Glossary of mining terms -- Planning and surveying
MRE/1 confirmed (2011)
BS 3618-3:1971 Glossary of mining terms -- Boring and
exploration
MRE/1 confirmed (2011)
BS 3618-6:1972 Glossary of mining terms -- Drilling and
blasting
MRE/1 confirmed (2011)
BS 3618-8:1974 Glossary of mining terms -- Winning and working
MRE/1 confirmed (2011)
BS 3618-11:1967 Glossary of mining terms -- Strata control MRE/1 confirmed (2011)
BS 4854:1972 Specification for cars for manriding in mines MRE/1 confirmed (2011)
BS 3618-2:1971 Glossary of mining terms -- Ventilation MRE/1 confirmed (2011)
BS 3618-10:1967 Glossary of mining terms -- Transport MRE/1 confirmed (2011)
BS 3618-4:1971 Glossary of mining terms -- Drainage MRE/1 confirmed (2011)
BS 3618-5:1971 Glossary of mining terms -- Geology MRE/1 confirmed (2011)
BS 6907-4:1988 Electrical installations for open-cast mines and quarries -- Recommendations for
winning, stacking and processing machinery, pumps and low signal level and
communications systems
MRE/3 confirmed (2011)
BS 7383:1990 Specification for cold-pour resin-based compound for use as a filling medium in
terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines
MRE/3 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 124 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 7019:1989 Specification for fully screened 400 A bolted
flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV,
primarily for use in mines
MRE/3 confirmed (2011)
BS 787-2:1968 Specification for mining type flameproof gate-end boxes -- Gate-end boxes with air-
break circuit-breakers (for use on 3-phase
a.c. circuits up to 650 volts)
MRE/3 confirmed (2011)
BS 787-1:1969 Specification for mining type flameproof
gate-end boxes -- Gate-end boxes for direct-on-line motor starting (for use on 3-phase
a.c. circuits up to 650 V)
MRE/3 confirmed (2011)
BS 5126-4:1993 Mining type flameproof supply and control units for use on systems up to 1100 V --
Specification for air-cooled transformers to
power drilling machines
MRE/3 confirmed (2011)
BS 6709:1986 Specification for interconnection of electrical
apparatus, constructed to two or more British Standards, for use in mines susceptible to
firedamp
MRE/3 confirmed (2011)
BS 6907-2:1988 Electrical installations for open-cast mines and quarries -- General recommendations for
protection against direct contact and electric
shock
MRE/3 confirmed (2011)
BS 787-4:1972 Specification for mining type flameproof
gate-end boxes -- Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up
to 650 V)
MRE/3 confirmed (2011)
BS 5126-3:1993 Mining type flameproof supply and control units for use on systems up to 1100 V --
Specification for air-cooled lighting
transformer units
MRE/3 confirmed (2011)
BS 3101:1986 Specification for control and interlock circuits
primarily associated with flameproof
restrained plugs and sockets for use in coal mines
MRE/3 confirmed (2011)
BS 5126-1:1993 Mining type flameproof supply and control units for use on systems up to 1100 V --
Specification for direct-on-line motor starters
MRE/3 confirmed (2011)
BS 7924:1999 Code of practice for the repair and overhaul of certified electrical apparatus intended for
use in mines susceptible to firedamp
MRE/3 confirmed (2011)
BS 7202:1989 Specification for non-incendive low voltage control/interlock and low voltage earth fault
monitoring circuits for use in mines
MRE/3 confirmed (2011)
BS 5126-2:1993 Mining type flameproof supply and control units for use on systems up to 1100 V --
Specification for circuit breaker units
MRE/3 confirmed (2011)
BS 6704:1996 Code of practice for selection, installation and maintenance of intrinsically safe electrical
equipment in coal mines
MRE/3 confirmed (2011)
BS 6907-3:1988 Electrical installations for open-cast mines
and quarries -- Recommendations for
equipment and ancillaries
MRE/3 confirmed (2011)
BS 3905:1995 Specification for 3.8/6.6 kV, 300 A bolted
flameproof cable couplers and adaptors, for
use in coal mines.
MRE/3 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 125 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 6705:1987 Specification for electrical measuring
instruments for use on intrinsically safe circuits in coal mines
MRE/3 confirmed (2011)
BS 5125:1990 Specification for 50 A 650 V flameproof,
restrained and bolted plugs and sockets for use in coal mines
MRE/3 confirmed (2011)
BS 787-3:1971 Specification for mining type flameproof
gate-end boxes -- Gate-end boxes with lighting transformers
MRE/3 confirmed (2011)
BS 6182-1:1994 Intriniscally safe power supplies for use in
coal mines -- Specification for d.c. power supplies
MRE/3 confirmed (2011)
BS 6182-2:1982 Intrinsically safe power supplies for use in
coal mines -- Specification for a.c. power supplies
MRE/3 confirmed (2011)
BS 6907-5:1988 Electrical installations for open-cast mines and quarries -- Recommendations for
operation
MRE/3 confirmed (2011)
BS 6556-2:1985 Low speed digital signals for use in coal mines -- Specification for transformer
coupling
MRE/3 confirmed (2011)
BS 6556-1:1985 Low speed digital signals for use in coal mines. -- Specification for optical coupling
MRE/3 confirmed (2011)
BS 6556-3:1985 Low speed digital signals for use in coal
mines -- Specification for message protocols
MRE/3 confirmed (2011)
BS 5754:1987 Specification for electrical analogue and state
signals for use in coal mines
MRE/3 confirmed (2011)
BS 6353:1983 Specification for underground loudspeaker communication systems in coal mines
MRE/3 confirmed (2011)
BS 6907-1:1988 Electrical installations for open-cast mines
and quarries -- Glossary
MRE/3 confirmed (2011)
BS 5067:1985 Specification for flameproof transformers for
use in mines
MRE/3 confirmed (2011)
BS 6708:1998 Flexible cables for use at mines and quarries MRE/3 confirmed (2011)
BS 3138:1992 Glossary of terms used in management services
MS/1 confirmed (2011)
BS 3641-2:1980 Symbols for machine tools -- Specification for
numerical control symbols
MTE/1 confirmed (2011)
PD 6490:1980 Guide to application of additional symbols
(and index) for machine tools
MTE/1 confirmed (2011)
BS 3766:1979 Specification for coolant pumps for machine tools
MTE/1 confirmed (2011)
BS 4656-9:1974 Accuracy of machine tools and methods of
test -- External cylindrical grinding machines with reciprocating table
MTE/1/2 confirmed (2011)
BS 7794:1995 Specification for square-drive sockets, driving
squares and accessories for power-driven socket wrenches
MTE/15 confirmed (2011)
BS 2090:1954 Specification for hook spanners, peg spanners, coupling wrenches and the related
slots, holes and horns
MTE/15 confirmed (2011)
BS 6101-6:1990 Machine tool ball screws -- Specification for ball nuts and principal dimensions of ball
screws
MTE/15 confirmed (2011)
BS 3087-10:1991 Pliers and nippers -- Specification for dimensions of tools not standardized by ISO
MTE/15 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 126 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 3159-2:1993 Woodworking saws for hand use --
Specification for tenon and dovetail saws
MTE/15 confirmed (2011)
BS 4006:1992 Specification for hand operated square drive socket wrenches and accessories
MTE/15 confirmed (2011)
BS 1842:1952 Specification for double-ended open-jawed
spanners for B.A. hexagon sizes
MTE/15 confirmed (2011)
BS 1937:1953 Specification for engineers' ratchet braces
and drilling pillars
MTE/15 confirmed (2011)
BS 3159-1:1999 Woodworking saws for hand use -- Specification for hand saws
MTE/15 confirmed (2011)
BS 3054:1959 Specification for fireman's axe with rubber
insulated handle
MTE/15 confirmed (2011)
BS 3594-2:1965 Specification for pipe wrenches -- Footprint
type wrenches
MTE/15 confirmed (2011)
BS 3594-1:1963 Specification for pipe wrenches -- Stillson type wrenches
MTE/15 confirmed (2011)
BS 2559:1994 Specification for screwdrivers and
screwdriver accessories
MTE/15 confirmed (2011)
BS 2559-3:1973 Specification for screwdrivers -- Insulated
screwdrivers
MTE/15 confirmed (2011)
BS 3066:1995 Specification for engineers' cold chisels and allied tools
MTE/15 confirmed (2011)
BS 3388:2004 Forks, shovels and spades. Requirements
and test methods
MTE/15 confirmed (2011)
BS 3823:1990 Grading of ash and hickory wood handles for
hand tools
MTE/15 confirmed (2011)
BS 3123:1959 Specification for spring calipers and spring dividers
MTE/15 confirmed (2011)
BS 1421:1995 Specification for picks, beater picks and
mattocks
MTE/15 confirmed (2011)
BS 3623:1981 Specification for woodworkers' metal-bodied
planes
MTE/15 confirmed (2011)
BS 1943:1989 Specification for woodworking chisels and gouges
MTE/15 confirmed (2011)
BS 3322:1981 Specification for carpenters' squares and
bevels
MTE/15 confirmed (2011)
BS 2957:1958 Specification for fireman's axe with ash
handle
MTE/15 confirmed (2011)
BS 3087-1:1991 Pliers and nippers -- General introduction MTE/15 confirmed (2011)
BS 498:1990 Specification for rasps and engineers' files MTE/15 confirmed (2011)
BS 5708:1979 Specification for pruner shears (secateurs) MTE/15 confirmed (2011)
BS 192-1:1996 Open-ended wrenches -- Metric and unified MTE/15 confirmed (2011)
BS 2556:1973 Specification for hand and breast drills MTE/15 confirmed (2011)
BS 2589:1955 Specification for railway track spanners MTE/15 confirmed (2011)
BS 2054:1953 Specification for augers and auger bits MTE/15 confirmed (2011)
BS 2558:1954 Specification for tubular box spanners MTE/15 confirmed (2011)
BS 7586:1992 Specification for combination wrenches MTE/15 confirmed (2011)
BS 7398:1991 Specification for hand hacksaw frames MTE/15 confirmed (2011)
BS 2945:1995 Specification for axes and hatchets MTE/15 confirmed (2011)
BS 2583:1955 Specification for podger spanners MTE/15 confirmed (2011)
BS 3555:1988 Specification for ring wrenches MTE/15 confirmed (2011)
BS 2558:Supplement
No. 1:1968
Metric sizes MTE/15 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 127 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 876:1995 Specification for hand hammers MTE/15 confirmed (2011)
BS 1978:1965 Specification for bit braces MTE/15 confirmed (2011)
BS 1660-3:1988 Machine tapers -- Specification for turret
sockets and reduction sleeves with tapped ends for tools with Morse taper shanks
MTE/18 confirmed (2011)
BS 1660-7:1988 Machine tapers -- Specification for extension
adaptors with external 7/24 tapers for tools with Morse taper shanks
MTE/18 confirmed (2011)
BS 949-2:1992 Screwing taps -- Specification for unified
ground thread taps. Manufacturing tolerances
MTE/18 confirmed (2011)
BS 1813:1974 Specification for dimensions of conduit dies, diestocks and guides
MTE/18 confirmed (2011)
BS 3088:1959 Specification for adjustable hand reamers
with inserted blades
MTE/18 confirmed (2011)
BS 328-4:1983 Drills and reamers -- Specification for dimensions of reamers
MTE/18 confirmed (2011)
BS 1098-1:1967 Specification for jig bushes -- Inch units MTE/18 the requirements for metric units in
BS 1098:1967
prior to its re-numbering as BS
1098-1:1967 have been replaced by
BS 1098-2:1977
BS 1919-1:1993 Hacksaw blades -- Specification for hand and machine hacksaw blades
MTE/20 confirmed (2011)
BS 411:1969 Specification for circular saws for
woodworking and their attachment
MTE/20 confirmed (2011)
BS 1919-2:1995 Hacksaw blades -- Specification for cutting
performance
MTE/20 confirmed (2011)
BS 3877:1991 Specification for metal cutting bandsaw blades
MTE/20 confirmed (2011)
BS 4411:1969 Specification for woodcutting bandsaw blades MTE/20 confirmed (2011)
BS 6271:1982 Specification for miniature hacksaw blades MTE/20 confirmed (2011)
BS 4078-1:1987 Powder actuated fixing systems -- Code of
practice for safe use
MTE/21 confirmed (2011)
BS 4078-2:1989 Powder actuated fixing systems --
Specification for tools
MTE/21 confirmed (2011)
BS 4094-1:1966 Recommendation for data on shielding from ionizing radiation -- Shielding from gamma
radiation
NCE/2 current
BS 4094-2:1971 Recommendation for data on shielding from ionizing radiation -- Shielding from X-
radiation
NCE/2 confirmed (2011)
BS 4513:1969 Specification for lead bricks for radiation
shielding
NCE/2 confirmed (2011)
BS 4975:1990 Specification for prestressed concrete pressure vessels for nuclear engineering
NCE/9 confirmed (2011)
BS 3338-13:1965 Methods for the sampling and analysis of tin
and tin alloys -- Method for the determination of antimony in solders and
white metal bearing alloys (volumetric: potassium bromate method)
NFE/27 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 128 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 3338-8:1961 Methods for the sampling and analysis of tin
and tin alloys -- Method for the determination of bismuth in ingot tin, tin-lead
solders and white metal bearing alloys
(photometric method)
NFE/27 confirmed (2011)
BS 3338-10:1961 Methods for the sampling and analysis of tin
and tin alloys -- Method for the
determination of iron in ingot tin, tin-lead solders and white metal bearing alloys
(photometric method)
NFE/27 confirmed (2011)
BS 3338-9:1965 Methods for the sampling and analysis of tin
and tin alloys -- Method for the
determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric
method)
NFE/27 confirmed (2011)
BS 3338-15:1965 Methods for the sampling and analysis of tin and tin alloys -- Method for the
determination of copper and lead in white metal bearing alloys (electrodeposition
method)
NFE/27 confirmed (2011)
BS 3338-18:1966 Methods for the sampling and analysis of tin and tin alloys -- Method for the
determination of aluminium in solders and white metal bearing alloys (photometric
method)
NFE/27 confirmed (2011)
BS 3338-17:1965 Methods for the sampling and analysis of tin and tin alloys -- Method for the
determination of cadmium in solders and
white metal bearing alloys (photometric method)
NFE/27 confirmed (2011)
BS 3338-19:1966 Methods for the sampling and analysis of tin and tin alloys -- Method for the
determination of zinc in solders and white
metal bearing alloys (photometric method)
NFE/27 confirmed (2011)
BS 3338-16:1965 Methods for the sampling and analysis of tin
and tin alloys -- Method for the
determination of tin in white metal bearing alloys (nickel coil reduction method)
NFE/27 confirmed (2011)
BS 3338-5:1961 Methods for the sampling and analysis of tin and tin alloys -- Method for the
determination of lead in ingot tin and tin-
antimony solders (photometric method)
NFE/27 confirmed (2011)
BS 3338-4:1961 Methods for the sampling and analysis of tin
and tin alloys -- Method for the
determination of copper in ingot tin and tin-lead solders (photometric method)
NFE/27 confirmed (2011)
BS 3338-7:1961 Methods for the sampling and analysis of tin and tin alloys -- Method for the
determination of silver in solders (volumetric:
ammonium thiocyanate method)
NFE/27 confirmed (2011)
BS 3338-6:1961 Methods for the sampling and analysis of tin
and tin alloys -- Method for the
determination of copper in high purity ingot tin (photometric method)
NFE/27 confirmed (2011)
BS 3338-11:1961 Methods for the sampling and analysis of tin and tin alloys -- Method for the
determination of tin in solders (nickel coil
reduction method)
NFE/27 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 129 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 3338-2:1961 Methods for the sampling and analysis of tin
and tin alloys -- Method for the determination of tin in ingot tin (aluminium
reduction method)
NFE/27 confirmed (2011)
BS 3338-20:1970 Methods for the sampling and analysis of tin and tin alloys -- Method for the
determination of nickel in capping metal
(photometric method)
NFE/27 confirmed (2011)
BS 3338-3:1961 Methods for the sampling and analysis of tin
and tin alloys -- Method for the determination of antimony in ingot tin
(photometric method)
NFE/27 confirmed (2011)
BS 3338-14:1965 Methods for the sampling and analysis of tin and tin alloys -- Method for the sampling of
white metal bearing alloy ingots
NFE/27 confirmed (2011)
BS 3338-21:1983 Methods for the sampling and analysis of tin and tin alloys -- Determination of high
cadmium content of soft solders
NFE/27 confirmed (2011)
BS 4393:1991 Specification for solderable tin or tin-lead coated wires for component terminations
NFE/27 confirmed (2011)
BS 61:1969 Specification for threads for light gauge
copper tubes and fittings
NFE/34 confirmed (2011)
BS 6931:1988 Glossary of terms for copper and copper
alloys
NFE/34 confirmed (2011)
BS 3907-10:1969 Methods for the analysis of magnesium and magnesium alloys -- Determination of
manganese in magnesium alloys containing zirconium, rare earths, thorium and/or silver
(photometric method)
NFE/35 confirmed (2011)
BS 3907-5:1966 Methods for the analysis of magnesium and magnesium alloys -- Determination of
manganese in magnesium and magnesium
alloys (photometric-periodate method) (low contents)
NFE/35 confirmed (2011)
BS 3907-2:1966 Methods for the analysis of magnesium and magnesium alloys -- Determination of iron in
magnesium and magnesium alloys
(photometric - 1:10-phenanthroline method)
NFE/35 confirmed (2011)
BS 3907-4:1966 Methods for the analysis of magnesium and
magnesium alloys -- Determination of
manganese in magnesium and magnesium alloys (photometric-periodate method)
NFE/35 confirmed (2011)
BS 3907-15:1976 Methods for the analysis of magnesium and magnesium alloys -- Determination of lead in
magnesium and magnesium alloys (atomic
absorption method)
NFE/35 confirmed (2011)
BS 3907-12:1971 Methods for the analysis of magnesium and
magnesium alloys -- Determination of
aluminium in magnesium and magnesium alloys (photometric method)
NFE/35 confirmed (2011)
BS 3907-6:1969 Methods for the analysis of magnesium and magnesium alloys -- Determination of
zirconium in magnesium and magnesium
alloys (photometric method)
NFE/35 confirmed (2011)
BS 3907-11:1970 Methods for the analysis of magnesium and
magnesium alloys -- Determination of silicon
in magnesium and magnesium alloys (photometric method)
NFE/35 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 130 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 3907-9:1969 Methods for the analysis of magnesium and
magnesium alloys -- Determination of zinc in magnesium alloys (ion-exchange-volumetric
EDTA method)
NFE/35 confirmed (2011)
BS 3907-3:1966 Methods for the analysis of magnesium and magnesium alloys -- Determination of copper
in magnesium and magnesium alloys
(photometric method)
NFE/35 confirmed (2011)
BS 1728-18:1970 Methods for the analysis of aluminium and
aluminium alloys -- Determination of zinc (ion-exchange-volumetric EDTA or
polarographic method)
NFE/35 confirmed (2011)
BS 3907-13:1972 Methods for the analysis of magnesium and magnesium alloys -- Determination of tin in
magnesium and magnesium alloys
(photometric method)
NFE/35 confirmed (2011)
BS 3907-8:1970 Methods for the analysis of magnesium and
magnesium alloys -- Determination of total rare earths in magnesium alloys (gravimetric
method)
NFE/35 confirmed (2011)
BS 3907-1:1965 Methods for the analysis of magnesium and magnesium alloys -- Determination of
aluminium in magnesium alloys (gravimetric
method)
NFE/35 confirmed (2011)
BS 1728-12:1961 Methods for the analysis of aluminium and
aluminium alloys -- Determination of silicon (absorptiometric molybdenum blue method)
NFE/35 confirmed (2011)
BS 1728-8:1957 Methods for the analysis of aluminium and
aluminium alloys -- Determination of iron (absorptiometric 1:10-phenanthroline
method)
NFE/35 confirmed (2011)
BS 1728-9:1957 Methods for the analysis of aluminium and aluminium alloys -- Determination of
manganese (volumetric: arsenite/nitrite
method)
NFE/35 confirmed (2011)
BS 3907-7:1969 Methods for the analysis of magnesium and
magnesium alloys -- Determination of nickel in magnesium alloys (photometric method)
NFE/35 confirmed (2011)
BS 1728-6:1955 Methods for the analysis of aluminium and
aluminium alloys -- Determination of iron (volumetric: titanous chloride method)
NFE/35 confirmed (2011)
BS 1728-19:1971 Methods for the analysis of aluminium and
aluminium alloys -- Determination of magnesium (atomic absorption method)
NFE/35 confirmed (2011)
BS 1728-10:1957 Methods for the analysis of aluminium and
aluminium alloys -- Determination of manganese (absorptiometric method)
NFE/35 confirmed (2011)
BS 1728-22:1972 Methods for the analysis of aluminium and
aluminium alloys -- Determination of magnesium (volumetric CDTA method)
NFE/35 confirmed (2011)
BS 1728-11:1960 Methods for the analysis of aluminium and aluminium alloys -- Determination of silicon
(perchloric acid method)
NFE/35 confirmed (2011)
BS 1728-20:1971 Methods for the analysis of aluminium and aluminium alloys -- Determination of lead
(atomic absorption method)
NFE/35 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 131 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 1728-5:1953 Methods for the analysis of aluminium and
aluminium alloys -- Determination of copper (absorptiometric method)
NFE/35 confirmed (2011)
BS 1728-16:1968 Methods for the analysis of aluminium and
aluminium alloys -- Determination of chromium (photometric method)
NFE/35 confirmed (2011)
BS 1728-17:1968 Methods for the analysis of aluminium and
aluminium alloys -- Determination of chromium (volumetric method)
NFE/35 confirmed (2011)
BS 1728-14:1965 Methods for the analysis of aluminium and
aluminium alloys -- Determination of nickel (gravimetric method)
NFE/35 confirmed (2011)
BS 1728-15:1966 Methods for the analysis of aluminium and
aluminium alloys -- Determination of nickel (photometric method)
NFE/35 confirmed (2011)
BS 1728-23:1976 Methods for the analysis of aluminium and aluminium alloys -- Copper (atomic
absorption method)
NFE/35 confirmed (2011)
BS 1728-24:1976 Methods for the analysis of aluminium and aluminium alloys -- Nickel (atomic absorption
method)
NFE/35 confirmed (2011)
BS 1728-21:1973 Methods for the analysis of aluminium and aluminium alloys -- Zinc (atomic absorption
method)
NFE/35 confirmed (2011)
BS 1728-1:1951 Methods for the analysis of aluminium and aluminium alloys -- Determination of copper
NFE/35 confirmed (2011)
BS 4574:1970 Recommendation for the determination of
the ink absorbency of paper and board by use of K & N ink
PAI/11 confirmed (2011)
BS 6563:1985 Method for determination of the roughness
of paper and board by the Parker Print-surf apparatus
PAI/11 confirmed (2011)
BS 4497:1969 Recommendations for the detection and estimation of nitrogenous treating agents in
paper
PAI/11 confirmed (2011)
BS 4818:1993 Method for determination of the creasing quality of carton board (Pira method)
PAI/11 confirmed (2011)
BS 6504:1984 Method for determination of water
absorption of paper and board (Klemm method)
PAI/11 confirmed (2011)
BS 4264:1987 Specification for envelopes for commercial,
official and professional use
PAI/11 confirmed (2011)
BS 4816:1972 Method for the determination of the puncture
resistance of board
PAI/11 confirmed (2011)
BS 4896:1973 Method for the determination of ash of pulp PAI/11 confirmed (2011)
BS 6410:1991 Methods of test for filter papers PAI/11 confirmed (2011)
BS 5261-2:2005 Copy preparation and proof correction -- Specification for typographic requirements,
marks for copy preparation and proof correction, proofing procedure
PAI/43 confirmed (2011)
BS 5261C:2005 Copy preparation and proof correction --
Marks for copy preparation and proof correction (extracted from BS 5261-2:2005)
PAI/43 confirmed (2011)
BS 159:1992 Specification for high-voltage busbars and
busbar connections
PEL/17/1 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 132 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 5000-3:2006 Rotating electrical machines of particular
types or for particular applications -- Generators to be driven by reciprocating
internal combustion engines. Requirements
for resistance to vibration
PEL/2 confirmed (2011)
BS 6121-5:2005 Mechanical cable glands -- Code of practice
for selection, installation and inspection of
cable glands and armour glands
PEL/213 confirmed (2011)
BS 6121-1:2005 Mechanical cable glands -- Armour glands.
Requirements and test methods
PEL/213 confirmed (2011)
BS 8020:2011 Tools for live working. Specification for insulating hand tools for work on or near
conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c.
PEL/78 current
BS 7194:1990 Specification for direct-current and low-
frequency electronic measuring instruments with a digital display
PEL/85 confirmed (2011)
BS 5164:1975 Specification for indirect-acting electrical
indicating and recording instruments and their accessories
PEL/85 confirmed (2011)
BS 90:1975 Specification for direct-acting electrical
recording instruments and their accessories
PEL/85 confirmed (2011)
BS 3693:1992 Recommendations for design of scales and
indexes on analogue indicating instruments
PEL/85 confirmed (2011)
BS 6366:2011 Specification for studs for rugby football boots
PH/3/11 current
BS 8468-1:2006 Respiratory equipment for use against
chemical, biological, radiological and nuclear (CBRN) agents -- Positive pressure, self-
contained, open-circuit breathing apparatus. Specification
PH/4 confirmed (2011)
BS 8468-3.2:2009 Respiratory protective devices for use against
chemical, biological, radiological and nuclear (CBRN) agents -- Air-purifying devices
incorporating a hood for escape. Specification
PH/4 current
BS 8468-6.1:2011 Respiratory protective devices for use against
chemical, biological, radiological and nuclear (CBRN) agents -- Positive-pressure
compressed airline equipment. Specification
PH/4 current
BS 8468-6.2:2011 Respiratory protective devices for use against chemical, biological, radiological and nuclear
(CBRN) agents -- Constant flow compressed airline equipment. Specification
PH/4 current
BS 8468-5:2011 Respiratory protective devices for use against
chemical, biological, radiological and nuclear (CBRN) agents -- Dual-mode apparatus.
Specification
PH/4 current
BS 8478:2011 Respiratory protective devices. Breathing gases for diving and hyperbaric applications.
Requirements and test methods
PH/4/7 partially replaced by BS EN
12021:2014
BS 8454:2006 Code of practice for the delivery of training and education for work at height and rescue
PH/5 confirmed (2011)
BS 3238-1:1960 Graphical symbols for components of servo-
mechanisms -- Transductors and magnetic amplifiers
PH/8/1 confirmed (2011)
BS 3238-2:1964 Graphical symbols for components of servo-mechanisms -- General servo-mechanisms
PH/8/1 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 133 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 8501:2002 Graphical symbols and signs. Public
information symbols
PH/8/2 confirmed (2011)
BS 1133-8:2011 Packaging code -- Guidance on wooden boxes, cases and crates
PKW/0/-/11 current
BS 5168:1975 Glossary of rheological terms PRI/10 confirmed (2011)
BS 2782-0:2011 Methods of testing plastic -- Introduction PRI/21 current
BS 5923-2:1980 Methods for chemical analysis of rubber -- EDTA titrimetric method for determination of
zinc content of rubber products
PRI/22 confirmed (2011)
BS 7164-11.2:1993 Chemical tests for raw and vulcanized rubber. Butadiene rubber -- Method for
determination of unsaturation
PRI/22 confirmed (2011)
BS 903-5:2004 Physical testing of rubber -- Guide to the application of rubber testing to finite element
analysis
PRI/22 confirmed (2011)
BS 903-A18:1973 Physical testing of rubber -- Determination of equilibrium water vapour absorption
PRI/22 current
BS 4370-2:1993 Methods of test for rigid cellular materials -- Methods 7 to 9
PRI/24 partially replaced by BS EN ISO
4590:1995 and BS
ISO 1922:2001. Was withdrawn
but has been reinstated
BS 2782-1:Method
140D:1997
Methods of testing plastics. Thermal
properties -- Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride
sheeting (laboratory method)
PRI/26 confirmed (2011)
BS 2782-1:Method 140E:1982
Methods of testing plastics. Thermal properties -- Flammability of a small, inclined
test piece exposed to an alcohol flame (laboratory method)
PRI/26 confirmed (2011)
BS 7953:1999 Entrance flooring systems. Selection,
installation and maintenance
PRI/3 confirmed (2011)
BS 5325:2001 Installation of textile floor coverings. Code of practice
PRI/3 confirmed (2009)
BS 5808:1991 Specification for underlays for textile floor coverings
PRI/3 partially replaced by BS EN
14499:2004
BS 2782-10:Method 1006:1978
Methods of testing plastics. Glass reinforced plastics -- Determination of volatile matter
and resin content of synthetic resin-
impregnated textile glass fabric
PRI/42 confirmed (2011)
BS 5734-5:1990 Polyester moulding compounds for electrical
and other purposes -- Specification for sheet moulding compounds for mechanical
purposes
PRI/42 confirmed (2011)
BS 6882:1987 Guide for storage of raw solid natural and synthetic rubber
PRI/50 confirmed (2011)
BS 5270-1:1989 Bonding agents for use with gypsum plasters
and cement -- Specification for polyvinyl acetate (PVAC) emulsion bonding agents for
indoor use with gypsum building plasters
PRI/52 confirmed (2011)
BS 5350-C7:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests --
Determination of creep and resistance to sustained application of force
PRI/52 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 134 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 5350-C1:1986 Methods of test for adhesives. Adhesively
bonded joints: mechanical tests -- Determination of cleavage strength of
adhesive bonds
PRI/52 confirmed (2011)
BS 5350-C15:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests --
Determination of bond strength in
compressive shear
PRI/52 confirmed (2011)
BS 5350-C14:1979 Methods of test for adhesives. Adhesively
bonded joints: mechanical tests -- 90$0D peel test for a rigid-to-rigid assembly
PRI/52 confirmed (2011)
BS 5350-D4:1976 Methods of test for adhesives. Adhesively
bonded joints: environmental tests -- Determination of staining potential
PRI/52 confirmed (2011)
BS 5350-G3:1987 Methods of test for adhesives --
Determination of ability of anaerobic adhesives to set on metal surfaces
PRI/52 confirmed (2011)
BS 5350-C13:1990 Methods of test for adhesives. Adhesively
bonded joints: mechanical tests -- Climbing drum peel test
PRI/52 confirmed (2011)
BS 5350-E1:1976 Methods of test for adhesives. Sampling and
analysis of test data -- Guide to statistical analysis
PRI/52 confirmed (2011)
BS 5350-A2:1990 Methods of test for adhesives. Adherends -- Guide to the selection of adherend materials
PRI/52 confirmed (2011)
BS 5350-A1:1976 Methods of test for adhesives. Adherends --
Adherend preparation
PRI/52 confirmed (2011)
BS 5350-B5:1976 Methods of test for adhesives -- Determination of gelation time
PRI/52 confirmed (2011)
BS 3046:1981 Specification for adhesives for hanging
flexible wallcoverings
PRI/52 confirmed (2011)
BS 5350-0:1987 Methods of test for adhesives -- General
introduction
PRI/52 confirmed (2011)
BS 6997:1990 Specification for elastomeric toroidal sealing rings ('O'-rings) manufactured from
acrylonitrile-butadiene rubbers complying with BS 6996
PRI/54 confirmed (2011)
BS 6716:1986 Guide to properties and types of rubber PRI/54 confirmed (2011)
BS 7044-4:1991 Artificial sports surfaces -- Specification for
surfaces for multi-sports use
PRI/57 partially replaced
by BS EN 14877:2006, BS
EN 14904:2006, BS EN 15330-
1:2007 and BS
15330-2
BS 7874:1998 Method of test for microbiological
deterioration of elastomeric seals for joints in pipework and pipelines
PRI/70 confirmed (2011)
BS
3379:2005+A1:2011
Combustion modified flexible polyurethane
cellular materials for loadbearing applications. Specification
PRI/71 current
BS 4023:1975 Specification for flexible cellular PVC sheeting PRI/71 confirmed (2011)
BS 7523:1991 Specification for preformed cellular
polyethylene (PE) materials for the thermal insulation of pipework
PRI/72 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 135 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 4841-5:2006 Rigid polyisocyanurate (PIR) and
polyurethane (PUR) products for building end-use applications -- Specification for
laminated boards (roofboards) with auto-
adhesively or separately bonded facings for use as thermal insulation boards for pitched
roofs
PRI/72/4 confirmed (2011)
BS 4841-2:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building
end-use applications -- Specification for laminated boards with auto-adhesively
bonded facings for use as thermal insulation for internal wall linings and ceilings
PRI/72/4 confirmed (2011)
BS 2782-3:Method
360C:1991
Methods of testing plastics. Mechanical
properties -- Determination of tear resistance of plastics film and sheeting by the initiation
method
PRI/75 confirmed (2011)
BS 2782-1:Method 131B:1983
Methods of testing plastics. Thermal properties -- Determination of extensibility
after heat ageing of flexible polyvinyl chloride sheet
PRI/75 confirmed (2011)
BS 2782-1:Method
150C:1983
Methods of testing plastics. Thermal
properties -- Determination of low temperature extensibility of flexible polyvinyl
chloride sheet
PRI/75 confirmed (2011)
BS 2782-6:Method 643A:1976
Methods of testing plastics. Dimensional properties -- Shrinkage on heating of film
intended for shrink wrapping applications
PRI/75 confirmed (2011)
BS 2782-8:Method 826A:1992
Methods of testing plastics. Other properties -- Determination of adhesion of print on
plastics sheet
PRI/75 confirmed (2011)
BS 2782-1:Method 150D:1976
Methods of testing plastics. Thermal properties -- Cold crack temperature of film
and thin sheeting
PRI/75 confirmed (2011)
BS 7344:1990 Specification for reeled low density polyethylene film for general purpose
application
PRI/75 confirmed (2011)
BS 3012:1970 Specification for low and intermediate density
polythene sheet for general purposes
PRI/75 confirmed (2011)
BS 2919:1968 Specification for low and intermediate density polythene rod for general purposes
PRI/75 confirmed (2011)
BS 3878:1982 Specification for flexible PVC sheeting for
hospital use
PRI/75 confirmed (2011)
BS 7476:1991 Specification for polyethylene film for
covering silage
PRI/75 confirmed (2011)
BS 3757:1978 Specification for rigid PVC sheet PRI/75 confirmed (2011)
BS 4965:1999 Decorative laminated plastics sheet veneered boards and panels
PRI/76 confirmed (2011)
BS 8472:2011 Methods for the assessment of the oxo-
biodegradation of plastics and of the phyto-toxicity of the residues in controlled
laboratory conditions
PRI/82 current
BS 6564-3:1990 Polytetrafluoroethylene (PTFE) materials and products -- Specification for E glass fibre
filled polytetrafluoroethylene
PRI/82 confirmed (2011)
BS 2880:1991 Methods of testing cellulose acetate flake PRI/82 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 136 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 5255:1989 Specification for thermoplastics waste pipe
and fittings
PRI/88 partially replaced
by BS EN 1329-1:2000, BS EN
1455-1:2000, BS
EN 1519-1:2000, BS EN 1565-
1:2000 and BS EN 1566-1:2000
BS 5392-1:2006 Acrylonitrile-butadiene-styrene (ABS) fittings
for use with ABS pressure pipe -- Specification
PRI/88/2 confirmed (2011)
BS 5391-1:2006 Acrylonitrile-butadiene-styrene (ABS)
pressure pipe -- Specification
PRI/88/2 confirmed (2011)
BS 6076:1996 Specification for polymeric film for use as a
protective sleeving for buried iron pipes and
fittings (for site and factory application)
PSE/10 confirmed (2011)
BS 416-1:1990 Discharge and ventilating pipes and fittings,
sand-cast or spun in cast iron -- Specification for spigot and socket systems
PSE/10 confirmed (2011)
BS 1560-3.2:1989 Circular flanges for pipes, valves and fittings
(Class designated). Steel, cast iron and copper alloy flanges -- Specification for cast
iron flanges
PSE/15 confirmed (2011)
BS 3293:1960 Specification for carbon steel pipe flanges (over 24 inches nominal size) for the
petroleum industry
PSE/15 confirmed (2011)
BS 6956-5:1992 Jointing materials and compounds -- Specification for jointing compounds for use
with water, low pressure saturated steam, 1st family gases (excluding coal gas) and 2nd
family gases
PSE/15/2 confirmed (2011)
BS 7076-3:1989 Dimensions of gaskets for flanges to BS 1560 -- Specification for non-metallic envelope
gaskets
PSE/15/2 confirmed (2011)
BS 6956-1:1988 Jointing materials and compounds -- Specification for corrugated metal joint rings
PSE/15/2 confirmed (2011)
BS 7531:2006 Rubber bonded fibre jointing for industrial
and aerospace purposes. Specification
PSE/15/2 confirmed (2011)
BS 3381:1989 Specification for spiral wound gaskets for
steel flanges to BS 1560
PSE/15/2 confirmed (2011)
BS 3063:1965 Specification for dimensions of gaskets for pipe flanges
PSE/15/2 confirmed (2011)
BS 7786:2006 Specification for unsintered PTFE tapes for
general use
PSE/15/2 confirmed (2011)
BS 4249:1989 Specification for paper and cork/paper
jointing
PSE/15/2 confirmed (2011)
BS 4371:1991 Specification for fibrous gland packings PSE/15/2 confirmed (2011)
BS 7775:2005 Penstocks for use in water and other liquid flow applications. Specification
PSE/18/3 confirmed (2011)
BS 2000-455:2011 Methods of test for petroleum and its
products -- Determination of the manganese content of gasoline. Atomic absorption
spectrometry (AAS) method
PTI/13 current
BS 2000-19:2011 Methods of test for petroleum and its
products -- Determination of demulsibility
characteristics of lubricating oil (Identical with IP 19/11)
PTI/13 current
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 137 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 2000-306:2011 Methods of test for petroleum and its
products -- Determination of oxidation stability of straight mineral oil (Identical with
IP 306/11)
PTI/13 current
BS 2000-48:2011 Methods of test for petroleum and its products -- Determination of oxidation
characteristics of lubricating oil (Identical
with IP 48/11)
PTI/13 current
BS 2000-10:2011 Methods of test for petroleum and its
products -- Determination of kerosine burning characteristics 24-hour method
PTI/13 current
BS 1016-6:1977 Methods for analysis and testing of coal and
coke -- Ultimate analysis of coal
PTI/16 partially replaced
by Sections and subsections of BS
1016
BS 1016-7:1977 Methods for analysis and testing of coal and coke -- Ultimate analysis of coke
PTI/16 partially replaced by Subsections of
BS 1016
BS 1016-8:1977 Methods for analysis and testing of coal and coke -- Chlorine in coal and coke
PTI/16 partially replaced by BS 1016-
106.6.1:1997
BS 2869:2010+A1:201
1
Fuel oils for agricultural, domestic and industrial engines and boilers. Specification
PTI/2 current
BS 1894:1992 Specification for design and manufacture of
electric boilers of welded construction
PVE/2 partially replaced
by BS EN 12953-
8:2001
BS 341-4:2004 Transportable gas container valves --
Pressure relief devices
PVE/3/1 confirmed (2009)
BS 8562:2011 Gas cylinders. In situ, non-destructive examination and testing of refillable seamless
steel tubes of water capacity between 150 L
and 3000 L, used for compressed gases Specification
PVE/3/7 current
BS 8535:2011 Railway applications. Wheelsets and bogies. Powered and non-powered axles with
inboard bearings. Design method
RAE/3 current
BS 845-2:1987 Methods for assessing thermal performance of boilers for steam, hot water and high
temperature heat transfer fluids. --
Comprehensive procedure
RHE/10 confirmed (2011)
BS 845-1:1987 Methods for assessing thermal performance
of boilers for steam, hot water and high temperature heat transfer fluids -- Concise
procedure
RHE/10 confirmed (2011)
BS 779:1989 Specification for cast iron boilers for central heating and indirect hot water supply (rated
output 44 kW and above)
RHE/10 partially replaced by BS EN 303-
1:1999 and BS EN
303-4:1999
BS 7190:1989 Method for assessing thermal performance of
low temperature hot water boilers using a test rig
RHE/10 confirmed (2011)
BS 853-2:1996 Specification for vessels for use in heating
systems -- Tubular heat exchangers and storage vessels for building and industrial
services
RHE/12 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 138 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 853-
1:1990+A3:2011
Specification for vessels for use in heating
systems -- Calorifiers and storage vessels for central heating and hot water supply
RHE/12 current
BS 7478:1991 Guide to selection and use of thermostatic
radiator valves
RHE/16 confirmed (2011)
BS 4376:1982 Specification for electrically operated blood storage refrigerators
RHE/19 partially replaced by BS 4376-
1:1991
BS 5429:1976 Code of practice for safe operation of small-
scale storage facilities for cryogenic liquids
RHE/21 confirmed (2011)
BS 8303-2:1994 Installation of domestic heating and cooking appliances burning solid mineral fuels --
Installation of domestic heating and cooking
appliances buring solid mineral fuels. Specification for installing and commissioning
on site
RHE/28 confirmed (2011)
BS 8303-3:1994 Installation of domestic heating and cooking
appliances burning solid mineral fuels --
Recommendations for design and on site installation
RHE/28 confirmed (2011)
BS 1846-1:1994 Glossary of terms relating to solid fuel
burning equipment -- Domestic appliances
RHE/28 confirmed (2011)
BS 5643:1984 Glossary of refrigeration, heating, ventilating
and air-conditioning terms
RHE/6 confirmed (2011)
BS 31100:2011 Risk management. Code of practice and guidance for the implementation of BS ISO
31000
RM/1 current
BS 1902-3.11:1983 Methods of testing refractory materials. General and textural properties --
Measurement of dimensions and shape of refractory bricks and blocks (methods 1902-
311)
RPI/1 confirmed (2011)
BS 1902-3.17:1990 Methods of testing refractory materials. General and textural properties --
Determination of volume and bulk density of dense shaped products (methods 1902-317)
RPI/1 confirmed (2011)
BS 1902-3.2:1981 Methods of testing refractory materials.
General and textural properties -- Measurement of dimensions of specimens for
testing (methods 1902-302)
RPI/1 confirmed (2011)
BS 1902-3.16:1990 Methods of testing refractory materials. General and textural properties --
Determination of pore size distribution (method 1902-316)
RPI/1 confirmed (2011)
BS 3446-2:1990 Glossary of terms associated with refractory
materials -- Applications in the coke, glass, cement and other non-metallurgical
industries
RPI/1 confirmed (2011)
BS 1902-3.14:1996 Methods of testing refractory materials. General and textural properties --
Determination of hydration tendency
RPI/1 confirmed (2011)
BS 1902-3.3:1981 Methods of testing refractory materials. General and textural properties -- Sieve
analysis (methods 1902-303)
RPI/1 confirmed (2011)
BS 3446-3:1990 Glossary of terms associated with refractory materials -- Applications in the metallurgical
industries
RPI/1 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 139 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 6434:1984 Guide to the use of BS 6065 'Methods for
sampling and acceptance testing of shaped refractory products'
RPI/1 confirmed (2011)
BS 1902-3.1:1981 Methods of testing refractory materials.
General and textural properties -- Guidance on sampling
RPI/1 confirmed (2011)
BS 1902-3.0:1988 Methods of testing refractory materials.
General and textural properties -- Introduction
RPI/1 confirmed (2011)
BS 3056-2:1985 Sizes of refractory bricks -- Specification for
bricks for use in glass-melting furnaces
RPI/1 confirmed (2011)
BS 4207:1989 Code of practice for the installation of
monolithic linings for steel chimneys and
flues
RPI/1 confirmed (2011)
BS 3446-1:1990 Glossary of terms associated with refractory
materials -- General and manufacturing
RPI/1 confirmed (2011)
BS 3056-3:1986 Sizes of refractory bricks -- Specification for bricks for rotary cement kilns
RPI/1 confirmed (2011)
BS 3056-7:1992 Sizes of refractory bricks -- Specification for
basic bricks for steel making
RPI/1 confirmed (2011)
BS 3056-1:1985 Sizes of refractory bricks -- Specification for
multi-purpose bricks
RPI/1 confirmed (2011)
BS 6886:1987 Specification for alumino-silicate refractories for use in coke ovens
RPI/1 confirmed (2011)
BS 3056-8:1987 Sizes of refractory bricks -- Specification for
bricks for ladles
RPI/1 confirmed (2011)
BS 4966:1991 Specification for silica refractories for use in
coke ovens
RPI/1 confirmed (2011)
BS 8904:2011 Guidance for community sustainable development
SDS/1/4 current
BS 8909:2011 Specification for a sustainability management
system for film
SDS/1/7 current
BS MA 18:1973 Specification for salt water piping systems in
ships
SME/32 confirmed (2011)
BS MA 78:1978 Specification for aluminium shore gangways SME/32 confirmed (2011)
BS 6002-3:2005 Sampling procedures for inspection by variables -- Guide to double sampling
schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
SS/5 confirmed (2011)
BS 6000-1:2005 Guide to the selection and usage of
acceptance sampling systems for inspection of discrete items in lots -- General guide to
acceptance sampling
SS/5 confirmed (2011)
BS 6000-2:2005 Guide to the selection and usage of acceptance sampling systems for inspection
of discrete items in lots -- Guide to sampling by attributes
SS/5 confirmed (2011)
BS 6000-3:2005 Guide to the selection and usage of
acceptance sampling systems for inspection of discrete items in lots -- Guide to sampling
by variables
SS/5 confirmed (2011)
BS 282; 389:1963 Specifications for lead chromes and zinc chromes for paints
STI/1 confirmed (2011)
BS 388:1972 Specification for aluminium pigments STI/1 confirmed (2011)
BS 3900-F6:1976 Methods of test for paint. Durability tests on paint films -- Notes for guidance on the
conduct of natural weathering test
STI/10 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 140 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 4800:2011 Schedule of paint colours for building
purposes
STI/14 current
BS 4800F:2011 BS 4800 Colour matching fan STI/14 current
BS 6496:1984 Specification for powder organic coatings for application and stoving to aluminium alloy
extrusions, sheet and preformed sections for external architectural purposes, and for the
finish on aluminium alloy extrusions, sheet and preformed sections coated with powder
organic coatings
STI/21 confirmed (2011)
BS 245:1976 Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints
and other purposes
STI/3 confirmed (2011)
BS 3761:1995 Specification for solvent-based paint remover STI/3 confirmed (2011)
BS 3279:1960 Specification for seedlac STI/3 confirmed (2011)
BS 3745:1970 Method for the evaluation of results of accelerated corrosion tests on metallic
coatings
STI/33 confirmed (2011)
BS 4921:1988 Specification for sherardized coatings on iron
or steel
STI/33 confirmed (2011)
BS 3831:1964 Specification for vitreous enamel finishes for domestic and catering appliances
STI/36 confirmed (2011)
BS 4900:1976 Specification for vitreous enamel colours for
building purposes
STI/36 confirmed (2011)
BS 4950:1973 Specification for sprayed and fused metal
coatings for engineering purposes
STI/40 confirmed (2011)
BS 4761:1971 Specification for sprayed unfused metal coatings for engineering purposes
STI/40 confirmed (2011)
BS 4495:1969 Recommendations for the flame spraying of
ceramic and cermet coatings
STI/40 confirmed (2011)
BS 11000-2:2011 Collaborative business relationships -- Guide
to implementing BS 11000-1
SVS/1/4 current
BS 8453:2011 Compliance framework for regulated financial services firms. Specification
SVS/6/2 current
BS 8564:2011 Furniture removal activities. Overseas moving
services. Specification
SVS/7/2 current
BS 8877:2011 Online recruitment. Code of practice SVS/9 current
BS 1892-3:2003 Gymnasium equipment -- Sports mats.
Specification for fire safety requirements for
mats, mattresses and landing areas
SW/136/22 confirmed (2011)
BS 1892-2.9:1986 Gymnasium equipment. Particular
requirements -- Specification for weight
training equipment
SW/136/22 confirmed (2011)
BS 1892-2.6:1986 Gymnasium equipment. Particular
requirements -- Specification for boxing rings
SW/136/22 confirmed (2011)
BS 4745:2005 Determination of the thermal resistance of textiles. Two-plate method: fixed pressure
procedure, two-plate plate method: fixed opening procedure, and single-plate method
TCI/24 confirmed (2011)
BS 947:1970 Specification for a universal system for
designating linear density of textiles (Tex system)
TCI/24 confirmed (2011)
BS 7141-2:1991 Narrow fabrics -- Specification for cotton
webbings for personal load carrying purposes
TCI/24 confirmed (2011)
BS 7141-1:1991 Narrow fabrics -- Specification for polyamide
and polyolefin woven tapes and webbings
TCI/24 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 141 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 7141-4:1990 Narrow fabrics -- Specification for woven
elastic webbings containing natural rubber
TCI/24 confirmed (2011)
BS 1625-6 and 4830:1972
Specifications for woven cotton tapes, light, medium and heavy qualities
TCI/24 confirmed (2011)
BS 7141-5:1990 Narrow fabrics -- Specification for elastic flat
braids containing natural rubber
TCI/24 confirmed (2011)
BS 984:1990 Method for determination of net mass of
retail packages of knitting and rug yarns
TCI/24 confirmed (2011)
BS 7318:1990 Specification for industrial sewing threads made from linen (flax) or cotton
TCI/24 confirmed (2011)
BS 4134:1990 Method for designation of ticket numbers of
industrial sewing threads
TCI/24 confirmed (2011)
BS 7141-7:1991 Narrow fabrics -- Specification for woven
cotton tapes and webbings
TCI/24 confirmed (2011)
BS 1664-8:1974 Specifications for woven cotton webbings of five qualities
TCI/24 confirmed (2011)
BS 7144:1989 Specification for flax and jute fabrics for
industrial use
TCI/24 confirmed (2011)
BS 7141-3:1990 Narrow fabrics -- Specification for wool tapes TCI/24 confirmed (2011)
BS 7200:1989 Specification for synthetic-fibre needlefelts TCI/24 confirmed (2011)
BS 6131:1982 Glossary of terms relating to household
sewing machines
TCI/33 confirmed (2011)
BS 7033-2:1989 Cleaning and polishing cloths -- Specification
for industrial wipers from reclaimed
materials, and waste yarn for cleaning and lubricating purposes
TCI/66 confirmed (2011)
BS 7033-3:1989 Cleaning and polishing cloths -- Specification
for floorcloths and dishcloths
TCI/66 confirmed (2011)
BS 8466:2006 Hats. Protection against solar UVR. Method
of test and performance requirements
TCI/66 current
BS 7033-5:1990 Cleaning and polishing cloths -- Specification for general polishing cloths
TCI/66 confirmed (2011)
BS 7033-4:1990 Cleaning and polishing cloths -- Specification
for window cleaning cloths
TCI/66 confirmed (2011)
BS 5815-1:2005 Sheets, sheeting, pillowslips, towels, napkins,
counterpanes and continental quilt secondary
covers suitable for use in the public sector -- Specification for sheeting, sheets and
pillowslips
TCI/66/1 confirmed (2011)
BS 5335-2:2006 Continental quilts -- Determination of thermal
resistance for quilts filled with feather and/or
down
TCI/66/1 confirmed (2011)
BS 5131-6.2:1979 Methods of test for footwear and footwear
materials. Codes of practice -- Code of
practice for the identification in footwear wear trials of major weaknesses in design or
construction and the assessment of fitness-for-purpose
TCI/69 confirmed (2011)
BS 5131-1.3:1991 Methods of test for footwear and footwear
materials. Adhesives -- Preparation of test assemblies using adhesives (other than hot
melt adhesives) for heat resistance (creep) and peel tests
TCI/69 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 142 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 5131-6.1:1981 Methods of test for footwear and footwear
materials. Codes of practice -- Code of practice for the comparative evaluation by
wear trial of materials, components or
constructions
TCI/69 confirmed (2011)
BS 5131-1.6:1979 Methods of test for footwear and footwear
materials. Adhesives -- Recommended
environmental storage conditions for adhesive joints prior to heat resistance or
peeling tests
TCI/69 confirmed (2011)
BS 5131-3.1:1991 Methods of test for footwear and footwear
materials. Uppers, textiles and threads --
Strength of upper materials and lining materials at right angles to stitch perforations
TCI/69 confirmed (2011)
BS 5131-1.7:1991 Methods of test for footwear and footwear
materials. Adhesives -- Preparation of test assemblies using hot melt adhesives for heat
resistance (creep) and peel tests
TCI/69 confirmed (2011)
BS 5131-5.13:1980 Methods of test for footwear and footwear
materials. Testing of complete footwear --
Measurement of the strength of stitched seams in upper and lining materials
TCI/69 confirmed (2011)
BS 3424-14:1985 Testing coated fabrics -- Method 16. Methods
for determination of colour fastness to wet and dry rubbing and determination of
resistance to printwear
TCI/69 confirmed (2011)
BS 5131-5.11:1981 Methods of test for footwear and footwear
materials. Testing of complete footwear --
Determination of the strength of buckle fastening assemblies
TCI/69 confirmed (2011)
BS 5131-1.8:1981 Methods of test for footwear and footwear
materials. Adhesives -- Rate of bond strength development in shear of hot melt adhesives
for lasting
TCI/69 confirmed (2011)
BS 3424-22:1983 Testing coated fabrics -- Method 25. Methods for determination of fusion of PVC coatings
and the state of cure of vulcanized rubber coatings
TCI/69 confirmed (2011)
BS 5131-2.7:1980 Methods of test for footwear and footwear
materials. Solings -- The preparation of test pieces from soling materials for physical
testing
TCI/69 confirmed (2011)
BS 3424-26:1990 Testing coated fabrics -- Methods 29A, 29B, 29C and 29D. Methods for determination of
resistance to water penetration and surface wetting
TCI/69 confirmed (2011)
BS 5131-5.2:1990 Methods of test for footwear and footwear
materials. Testing of complete footwear -- Degree of vulcanization of moulded-on
rubber soles
TCI/69 confirmed (2011)
BS 5131-5.9:1979 Methods of test for footwear and footwear materials. Testing of complete footwear --
Strength of top piece attachment to shoe heels
TCI/69 confirmed (2011)
BS 5131-5.7:1978 Methods of test for footwear and footwear
materials. Testing of complete footwear -- Fatigue test for rigid units and shoe bottoms
TCI/69 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 143 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 5131-2.1:1991 Methods of test for footwear and footwear
materials. Solings -- Ross flexing method for cut growth resistance of soling materials
TCI/69 confirmed (2011)
BS 5131-5.6:1991 Methods of test for footwear and footwear
materials. Testing of complete footwear -- Impact test for rigid units and shoe bottoms
TCI/69 confirmed (2011)
BS 3424-36:1993 Testing coated fabrics -- Method 39. Method
for determination of the dimensional stability of coated fabrics to domestic washing
TCI/69 confirmed (2011)
BS 5131-2.11:1983 Methods of test for footwear and footwear
materials. Solings -- Resistance of solings to short-term contact with a hot surface
TCI/69 confirmed (2011)
BS 5131-4.8:1990 Methods of test for footwear and footwear
materials. Other components -- Resistance of heels of ladies' shoes to lateral impact
TCI/69 confirmed (2011)
BS 5131-3.4:1978 Methods of test for footwear and footwear materials. Uppers, textiles and threads --
Edgewise compressibility, upper materials
TCI/69 confirmed (2011)
BS 5131-5.1:1990 Methods of test for footwear and footwear materials. Testing of complete footwear --
Adhesion of stuck-on and moulded-on soles
TCI/69 confirmed (2011)
BS 3424-20:1987 Testing coated fabrics -- Method 23. Method for determination of dimensional changes on
mechanical relaxation at zero tension
TCI/69 confirmed (2011)
BS 5131-5.3:1990 Methods of test for footwear and footwear materials. Testing of complete footwear --
Resistance of complete footwear to heat
TCI/69 confirmed (2011)
BS 3144:Addendum No. 1:1981
Sampling and physical testing of leather -- Determination of resistance to bending and
abrasion of heavy leather
TCI/69 confirmed (2011)
BS 3424-25:1993 Testing coated fabrics -- Method 28. Method for determination of the coating thickness
and thickness of any expanded layer
TCI/69 confirmed (2011)
BS 5131-4.7:1975 Methods of test for footwear and footwear
materials. Other components -- Resistance to
peeling of ribs stuck to insoles
TCI/69 confirmed (2011)
BS 5131-3.6:1991 Methods of test for footwear and footwear
materials. Uppers, textiles and threads --
Abrasion resistance of shoe laces
TCI/69 confirmed (2011)
BS 3424-18:1986 Testing coated fabrics -- Methods 21A and
21B. Methods for determination of resistance to wicking and lateral leakage
TCI/69 confirmed (2011)
BS 5131-1.1:1991 Methods of test for footwear and footwear
materials. Adhesives -- Resistance of adhesive joints to heat (creep test)
TCI/69 confirmed (2011)
BS 5131-3.7:1991 Methods of test for footwear and footwear
materials. Uppers, textiles and threads -- Breaking strength of shoe laces
TCI/69 confirmed (2011)
BS 5131-1.9:1985 Methods of test for footwear and footwear
materials. Adhesives -- Measurement of green strength of adhesive joints
TCI/69 confirmed (2011)
BS 5131-4.6:1975 Methods of test for footwear and footwear
materials. Other components -- Shear strength of ribs stuck to insoles
TCI/69 confirmed (2011)
BS 5131-5.4:1978 Methods of test for footwear and footwear materials. Testing of complete footwear --
Sole bond peeling strength
TCI/69 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 144 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 5131-4.1:1975 Methods of test for footwear and footwear
materials. Other components -- Resistance to peeling of insole board
TCI/69 confirmed (2011)
BS 5131-3.5:1978 Methods of test for footwear and footwear
materials. Uppers, textiles and threads -- The break/pipiness test
TCI/69 confirmed (2011)
BS 5131-1.2:1991 Methods of test for footwear and footwear
materials. Adhesives -- Resistance of adhesive joints to peeling
TCI/69 confirmed (2011)
BS 3424-17:1987 Testing coated fabrics -- Method 20. Method
for determination of dimensional stability to water immersion
TCI/69 confirmed (2011)
BS 5131-4.5:1990 Methods of test for footwear and footwear
materials. Other components -- Tensile strength of fibreboard
TCI/69 confirmed (2011)
BS 3424-34:1992 Testing coated fabrics -- Method 37. Method for determination of water vapour
permeability index (WVPI)
TCI/69 confirmed (2011)
BS 7269-1:1991 Drycleanability of leather garments -- Specification for drycleanability and for
appropriate care labels
TCI/69 confirmed (2011)
BS 5131-4.2:1990 Methods of test for footwear and footwear materials. Other components -- Flexing index
of fibreboard
TCI/69 confirmed (2011)
BS 3424-31:1990 Testing coated fabrics -- Method 34. Method for determination of resistance to scuffing
and snagging
TCI/69 confirmed (2011)
BS 3424-13:1999 Testing coated fabrics -- Guide to the selection of methods for colour fastness to
light testing
TCI/69 confirmed (2011)
BS 3424-24:1990 Testing coated fabrics -- Methods 27A and 27B. Methods for determination of abrasion
resistance
TCI/69 confirmed (2011)
BS 3144:Addendum
No. 2:1981
Sampling and physical testing of leather --
Measurement of water vapour absorption
TCI/69 confirmed (2011)
BS 3424-21:1993 Testing coated fabrics -- Method 24. Method for determination of elongation and tension
set
TCI/69 confirmed (2011)
BS 3424-19:1989 Testing coated fabrics -- Methods 22A, 22B and 22C. Determination of sulphur staining
TCI/69 confirmed (2011)
BS 3546:2001 Coated fabrics for use in the manufacture of
water penetration resistant clothing
TCI/69 confirmed (2011)
BS 3424-10:1987 Testing coated fabrics -- Methods 12A and
12B Determination of surface drag
TCI/69 confirmed (2011)
BS 5131-0:1990 Methods of test for footwear and footwear materials -- General introduction
TCI/69 confirmed (2011)
BS 7269-2:1991 Drycleanability of leather garments -- Method
for assessing drycleanability
TCI/69 confirmed (2011)
BS 7141-6:1989 Narrow fabrics -- Specification for laces for
footwear and other purposes
TCI/69 confirmed (2011)
BS 3424-16:1995 Testing coated fabrics -- Method 18. Determination of air permeability
TCI/69 confirmed (2011)
BS 3424-28:1995 Testing coated fabrics -- Method 31.
Determination of specular gloss
TCI/69 confirmed (2011)
BS 5455:1977 Specification for polyurethane coated nylon
fabric for mattress covers
TCI/69 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 145 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 3424-38:1998 Testing coated fabrics -- Determination of
wounded burst strength
TCI/69 confirmed (2011)
BS 3935:1991 Guide to classification and marking of cattle hides and calfskins
TCI/69 confirmed (2011)
BS 4981:1984 Specification for Mondopoint footwear sizing
and marking system
TCI/69 confirmed (2011)
BS 6453:1984 Specification for performance of leathers for
garments
TCI/69 confirmed (2011)
BS 7451:1991 Specification for archival quality bookbinding leather
TCI/69 confirmed (2011)
BS 2797:1976 Specification for leathers for gas meter
diaphragms
TCI/69 confirmed (2011)
BS 3424-0:2000 Testing coated fabrics -- Index of parts TCI/69 confirmed (2011)
BS 6715:1991 Specification for chamois leather TCI/69 confirmed (2011)
BS 5833:1988 Scheme for labelling of footwear TCI/69 confirmed (2011)
BS 4674:1971 Methods for the determination of the
breaking load and knot breaking load of netting yarns for fishing nets
TCI/77 confirmed (2011)
BS 3367:1999 Specification for ropes and lines for fire
service use other than for rope rescue purposes
TCI/77 confirmed (2011)
BS 4406:1969 Specification for the designation in the Tex system of netting yarns for fishing nets
TCI/77 confirmed (2011)
BS 1214:1977 Specification for hessian sandbags and rot-
proofed hessian sandbags
TCI/77 confirmed (2011)
BS 5398:1976 Classification of methods for mounting and joining of fishing nets
TCI/77 confirmed (2011)
BS 3566:1982 Specification for lightweight salvage sheets for fire service use
TCI/77 confirmed (2011)
BS 1103:1989 Specification for fabrics for the reinforcement
of rubber hoses
TCI/77 confirmed (2011)
BS 7648:1993 Specification for double braided ropes made from man-made fibre
TCI/77 confirmed (2011)
BS 5127:1974 Specification for polyolefin webbing for
divans and bed bases
TCI/77 confirmed (2011)
BS 4881:1993 Specification for polypropylene film cords,
lines and twines
TCI/77 confirmed (2011)
BS 3104:1970 Specification for polyamide (nylon) mountaineering ropes
TCI/77 confirmed (2011)
BS 4763:1971 Methods for cutting knotted netting to shape
(tapering)
TCI/77 confirmed (2011)
BS 525:1991 Specification for fibre cores for wire ropes TCI/77 confirmed (2011)
BS 6170:1981 Specification for flax canvas water buckets TCI/77 confirmed (2011)
BS 6894:1987 Specification for jute hessian tubing TCI/77 confirmed (2011)
BS 3408:1992 Specification for tarpaulins TCI/77 confirmed (2011)
BS 6810-2:2005 Determination of metals in textiles -- Analysis
by atomic emission spectroscopy
TCI/80 confirmed (2011)
BS 8459:2005 Determination of extractable matter in
textiles. Method
TCI/80 confirmed (2011)
BS 4407:1988 Methods for quantitative analysis of fibre mixtures
TCI/80 replaced by Parts of BS EN ISO
1833
BS 1006:B01C:LFS1:19
82
Methods of test for colour fastness of textiles and leather. Blue wool standards --
Reference standard for no. 1
TCI/81 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 146 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS
1006:B01C:LFS2:1985
Methods of test for colour fastness of textiles
and leather. Blue wool standards -- Reference standard for no. 2
TCI/81 confirmed (2011)
BS
1006:B01C:LFS3:1989
Methods of test for colour fastness of textiles
and leather. Blue wool standards -- Reference standard for no. 3
TCI/81 confirmed (2011)
BS
1006:B01C:LFS4:1990
Methods of test for colour fastness of textiles
and leather. Blue wool standards -- Reference standard for no. 4
TCI/81 confirmed (2011)
BS
1006:B01C:LFS5:1988
Methods of test for colour fastness of textiles
and leather. Blue wool standards -- Reference standard for no. 5
TCI/81 confirmed (2011)
BS
1006:B01C:LFS6:1988
Methods of test for colour fastness of textiles
and leather. Blue wool standards -- Reference standard for no. 6
TCI/81 confirmed (2011)
BS 1006:B01C:LFS7:19
85
Methods of test for colour fastness of textiles and leather. Blue wool standards --
Reference standard for no. 7
TCI/81 confirmed (2011)
BS 1006:B01C:LFS8:19
87
Methods of test for colour fastness of textiles and leather. Blue wool standards --
Reference standard for no. 8
TCI/81 confirmed (2011)
BS 6923:1988 Method for calculation of small colour differences
TCI/81 confirmed (2011)
BS 6246-5:1991 Industrial laundry machinery -- Methods for
the assessment of the effect of shaped garment finishing machinery on textiles
TCI/82 confirmed (2011)
BS 7305:1990 Method for determination of the maximum
safe ironing temperature of fabrics
TCI/82 confirmed (2011)
BS 5742:1989 Specification for textile labels requiring to be
washed and/or dry cleaned
TCI/82 confirmed (2011)
BS 7940:1999 Analogue PSTN terminal support interface TCT/2 confirmed (2011)
BS 3730-2:1982 Assessment of departures from roundness -- Specification for characteristics of stylus
instruments for measuring variations in radius (including guidance on use and
calibration)
TDW/4 current
BS 1646-3:1984 Symbolic representation for process measurement control functions and
instrumentation -- Specification for detailed symbols for instrument interconnection
diagrams
TDW/4 confirmed (2011)
BS 1646-2:1983 Symbolic representation for process measurement control functions and
instrumentation -- Specification for additional
basic requirements
TDW/4 confirmed (2011)
BS 959:2008 Specification for internal micrometers
(including stick micrometers)
TDW/4 current
BS 969:2008 Specification for limits and tolerances on plain limit gauges
TDW/4 partially replaced by BS EN ISO
1938-1:2015
BS 887:2008 Precision vernier callipers. Requirements and test methods
TDW/4 partially replaced by BS EN ISO
13385-1:2011
BS 907:2008 Specification for dial gauges for linear
measurement
TDW/4 partially replaced
by BS EN ISO
463:2006
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 147 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 3777:1964 Specification for screw thread measuring
cylinders
TDW/4 replaced by BS
5590:1978
BS 1643:2008 Specification for precision vernier height gauges
TDW/4 partially replaced by BS EN ISO
13225:2012
BS 6365:2008 Specification for precision vernier depth gauges
TDW/4 partially replaced by BS EN ISO
13385-2:2011
BS 870:2008 Specification for external micrometers TDW/4 partially replaced
by BS EN ISO
3611:2010
BS 2795:1981 Specification for dial test indicators (lever
type) for linear measurement
TDW/4/4 replaced by BS EN
ISO 9493:2010
and has been declared
obsolescent
PD 68888:2011 Objectives and learning outcomes for BS
8888 training
TDW/4/6 current
BS 7373-2:2001 Product specifications -- Guide to identifying criteria for a product specification and to
declaring product conformity
TDW/4/7 confirmed (2011)
BS 8887-240:2011 Design for manufacture, assembly, disassembly and end-of-life processing
(MADE) -- Reconditioning
TDW/4/7 current
BS 7373-3:2005 Product specifications -- Guide to identifying criteria for specifying a service offering
TDW/4/7 confirmed (2011)
BS 7373-1:2001 Guide to the preparation of specifications --
Guide to preparation
TDW/4/7 confirmed (2011)
BS 3300:1974 Specification for kerosine (paraffin) unflued
space heaters, cooking and boiling appliances
for domestic use
W/- confirmed (2011)
BS 3300:1985 Specification for paraffin unflued space
heating and cooking appliances for domestic use
W/- confirmed (2011)
BS 2049:1985 Specification for paraffin lighting appliances
for domestic use
W/- confirmed (2011)
BS 4570:1985 Specification for fusion welding of steel castings
WEE/-/1 partially replaced by BS EN 1011-
8:2004
BS 7363:1990 Method for bead-on-plate (BOP) test for
welds
WEE/2 confirmed (2009)
BS 4677:1984 Specification for arc welding of austenitic stainless steel pipework for carrying fluids
WEE/21 confirmed (2011)
BS 6990:1989 Code of practice for welding on steel pipes
containing process fluids or their residuals
WEE/21 confirmed (2011)
BS 2633:1987 Specification for Class I arc welding of ferritic
steel pipework for carrying fluids
WEE/21 confirmed (2011)
BS 2971:1991 Specification for class II arc welding of carbon steel pipework for carrying fluids
WEE/21 confirmed (2011)
BS 4515-2:1999 Specification for welding of steel pipelines on
land and offshore -- Duplex stainless steel pipelines
WEE/21/7 confirmed (2011)
BS 7670-2:1997 Steel nuts and bolts for resistance projection
welding -- Specification for welding of weld nuts and weld bolts
WEE/29 confirmed (2011)
Email your comments to: BSUKoperations.review@bsigroup.com Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee
Page 148 of 148 January 2016
BS identifier BS_Title Committee Status Final Review
Outcome
BS 4871-3:1985 Specification for approval testing of welders
working to approved welding procedures -- Arc welding of tube to tube-plate joints in
metallic materials
WEE/36 confirmed (2011)
BS 9690-2:2011 Non-destructive testing. Guided wave testing -- Basic requirements for guided wave testing
of pipes, pipelines and structural tubulars
WEE/46 current
BS 9690-1:2011 Non-destructive testing. Guided wave testing -- General guidance and principles
WEE/46 current
BS 2737:1956 Terminology of internal defects in castings as
revealed by radiography
WEE/46 confirmed (2011)