Post on 11-Jun-2018
b&m-PORT
E A S YTEP by
step
b&m-TIGHT®
Thread-forming screw with sealing function for high-strength materials.Property class: 10.9with an inductively hardened forming zone.
b&m-TRIMNUT®
The b&m-TRIMNUT® is the first tread grooving nut design.
It is also able to remove welding splatters as well as coating deposits and mechani-cal damages. The b&m-TRIMNUT® can be applicated on all ductile metals.
b&m-SHEETFORM®
Thread-forming screw for thin sheet-metal applications.
Property class: 10.9
b&m-FORM®
Thread-forming screw for steel and non-ferrous metal.
Property class: 10.9
b&m-PLAST®
Thread-forming screw for thermoplastics.
Property class: 10.9
b&m-XPLAST®
Thread-forming screw forthermoplastics with a high glas fibre content.Property class: 10.9
b&m-CARBONPLAST®
Austenitic corrosion resistant thread-forming screw for carbon fibre materials.Property class: High-strength
baier & michels USA Inc. 1629 Poplar Drive Ext | Greer, SC 29651 | USAT +1 864 968 1999 | F +1 864 968 1234 usa@baier-michels.com | www.baier-michels.com
baier & michels GmbH & Co. KGCarl-Schneider-Str. 1 | (Industriegebiet 3) | 64372 Ober-RamstadtT +49 (0) 61 54 69 60 - 0 | F +49 (0) 61 54 69 60 - 500info@baier-michels.com | www.baier-michels.com
Wuerth baier & michels (Shanghai) Automotive Fastener Co., Ltd伍尔特拜尔米(上海)汽车紧固件有限公司上海环城西路西八字桥路1658号5幢201室No. 1658 | West Ba Zi Qiao Road | Huan Cheng Xi Lu Fengxian District | Shanghai 201400T +86 21 6715 6028 | F +86 21 6715 6068 8001china@baier-michels.com | www.baier-michels.com
b&m-INOXFORM®
Austenitic corrosion resistant thread-forming screw for stainless steel and non-ferrous metal in corrosive environment.Property class: High-strength
baier & michels S.r.l.Viale della Regione Veneto, 17 | 35127 Padova | ItalienT +39 04 98 53 66 00 | F +39 04 98 53 66 96italy@baier-michels.it | www.baier-michels.it
DIN 1ISO 2339Taper pins
steel blank (Type A) 0249 0...steel blank (Type B) 0249 ...A1 (Type B) 0267 5...A4 (Type B) 0270 1...
DIN 7ISO 2338Parallel pins
steel blank m6 0252 ...steel blank H11 0252 7...steel blank H8 0252 9...
DIN 84ISO 1207Pan head screws
brass blank 0001 ...brass nickel-plated 0017 ...steel blank 4.8 0040 0...steel blue zinc plated 4.8 0040 ...steel blank 8.8 0040 4...steel blue zinc plated 8.8 0040 5...steel blank 5.8 0040 71..steel blue zinc plated 5.8 0040 74..steel yellow zinc plated 4.8 0040 7...steel nickel-plated 4.8 0040 9...polyamide 6.6 0278 ...A2 0287 ...A4 0289 ...
DIN 85ISO 1580Pan head screwsbrass blank 0001 2...brass nickel-plated 0001 3...steel blank 4.8 0041 0...steel blue zinc plated 4.8 0041 ...steel yellow zinc plated 4.8 0041 7...steel nickel-plated 4.8 0041 9...polyamide 6.6 0278 9...A2 0271 ...A4 0285 ...
DIN 93
Tab washers
steel blank 0427 9...steel blue zinc plated 0427 99...A2 0409 916 ...A4 0412 910 ...
DIN 94ISO 1234Split cotter pins
steel yellow zinc plated 0470 0...steel blue zinc plated 0470 ...steel blank 0470 9...brass blank 4418 ...A2 0474 ...A4 0483 ...
DIN 95
Raised countersunk head wood screws
brass blank 0140 ...brass nickel-plated 0143 ...brass chrome plated 0146 ...
DIN 96
Round head wood screws
steel blue zinc plated 0156 ...A2 0193 00...
DIN 97
Countersunk head wood screws
steel blue zinc plated 0157 ...A2 0193 01...
DIN 127Spring lock washers, with tang ends steel blank (Type B) 0440...steel blank (Type A) 0441 900...steel yellow zinc plated (Type B) 0441 00...steel yellow zinc plated (Type A) 0441 90...steel blue zinc plated (Type A) 0441 9...steel blue zinc plated (Type B) 0441...A2 (Type A) 0447 0...A2 (Type B) 0447...A4 (Type B) 0445...
DIN 126
Washers
steel blank 4601...steel blue zinc plated 4602...steel yellow zinc plated 4603/4604...steel blackchrome-plated 4605...steel black-oxided 4606...
DIN 128
Curved or wave spring lock washers steel yellow zinc plated (Type A) 0441 80...steel blank (Type A) 0441 800...steel blue zinc plated (Type A) 0441 8...steel blue zinc plated (Type B) 0441...A4 (Type A) 0445 00...A2 (Type A) 0447 900...
DIN 137
Curved spring washerssteel blank (Type A) 0434 000...steel blank (Type B) 0435 000...steel yellow zinc plated (Type A) 0434 0...steel yellow zinc plated (Type B) 0434 0... steel blue zinc plated (Type A) 0434...steel blue zinc plated (Type B) 0435...A2 (Type A) 0409 900...A2 (Type B) 0409 90...
DIN 134
Washers
steel blue zinc plated140HV 4631 1...steel yellow zinc plated 140HV 4631 0...
DIN 186
T-head bolts with square neck
A2 0272 0...A4 0277 0...
DIN 314
Wing nutsAmerican Type
steel blue zinc plated 0342 ...A2 0344 0...
DIN 315
Wing nutsGerman Type
steel yellow zinc plated 0342 00...steel blue zinc plated 0342 0...A2 0344 00...A4 0340 04...
DIN 316
Wing screwsGerman Type
steel yellow zinc plated 0237 0...steel blue zinc plated 0237...malleable cast ironblue zinc plated 0237 75...A2 0272 81...
DIN 316
Wing screwsAmerican Type
steel blue zinc plated US 4.8 0237 90...A2 0272 82...A4 0277 94...
DIN 427ISO 2342Slotted headless screwswith chamfered end
steel blank 14H 0253 10...steel blue zinc plated 14H 0253 11...A2 0272 00...A4 0277 00...
DIN 431
Pipe nuts with thread accordingto DIN ISO 228 part 1
A2 0328 0...A4 0334 0...
DIN 432
Washers with external tab
steel blank 0433 0...steel blue zinc plated 0433 00...A2 0409 917...A4 0412 01...
DIN 433ISO 7092Washers for pan head screwsbrass nickel-plated 0400 9... steel blank 140HV 0414 00...steel blue zinc plated 140HV 0414...steel yellow zinc plated 140HV 0414 0...copper blank 0414 7...A2 140HV 0415...A4 140HV 0412 90...
DIN 434
Square taper washers for U-sections
steel blank 0450 000...steel hot-dip galvanized 0450...steel yellow zinc plated 0450 0...steel blue zinc plated 0450...A2 0409 920...
DIN 435
Square taper washers for I-sections
steel blue zinc plated 0452 ...steel yellow zinc plated 0452 000...A4 0412 96...
DIN 436
Square washersfor wood constructions
steel blue zinc plated 0453 11...steel blank 0453 1...A2 0409 905 ...A4 0412 901 ...
DIN 439ISO 4035/4036Hexagon thin nuts
brass blank 0301...steel blank 04 0311...steel yellow zinc plated 04 0318 0...steel blue zinc plated 04 0318...steel blue zinc plated 5 0318 501...steel blue zinc plated 8 0318 80...A2 0328...A4 0334...
DIN 440ISO 7094Round washers forwood constructions steel blank (Type R) 0454...steel blue zinc plated (Type V) 0459 00...steel blue zinc plated (Type R) 0459...steel yellow zinc plated (Type R) 0459 9...steel hot-dip galvanized (Type V) 0459 000...steel hot-dip galvanized (Type R) 0459 0...A2 (Type R) 0409 906...A4 (Type R) 0412 902...A4 (Type V) 0412 903...
DIN 443
Push-in sealing cups
steel yellow zinc plated (Type A) 0476 00...steel yellow zinc plated (Type B) 0476 77/9...steel blue zinc plated (Type A) 0476 0...steel blue zinc plated (Type B) 0476 77...steel blank (Type A) 0476...steel blank (Type B) 0476 7...
DIN 444
Eye bolts
steel blue zinc plated 4.6 (Type B) 0236 0...steel blank 4.6 (Type LB) 0236 6...steel blank 4.6 (Type B) 0236 7...steel yellow zinc plated 4.6 (Type B) 0236 9...A2 (Type B) 0101...A4 (Type B) 0058...
DIN 463
Tab washers with long and short tab
steel blank 0427 0...steel blue zinc plated 0427 00...steel yellow zinc plated 0427 000...A2 0409 919...A4 0412 00...
DIN 464
Knurled thumb screws,high type
steel blank 5.8 0224 0...steel blue zinc plated 5.8 0224 1...steel yellow zinc plated 0224 3...A2 0101 6...
DIN 465
Slotted knurled thumb screws
A2 0101 8...
DIN 466
Knurled thumb nuts,high type
steel blank 5 0312...steel blue zinc plated 5 0312 1...steel yellow zinc plated 5 0312 0...A2 0387 0...
DIN 467
Knurled thumb nuts,flat type
steel blank 5 0312 3...steel blue zinc plated 5 0312 2...A2 0387...
DIN 470
Sealing washers
steel blank 0471 0...steel blue zinc plated 0471 00...steel yellow zinc plated 0471 000...
DIN 471
Retaining rings forshafts
steel blank (Type A) 0438...steel Delta Seal (Type A) 0438 10...stainless steel 1.4122 0489 01...
DIN 472
Retaining rings for bores
steel blank (Type J) 0439...steel Delta Seal(Type J) 0439 10...stainless steel 1.4122 0489 02...
DIN 478
Square head bolts with collar
steel blank 5.8 4105 8...steel blank 8.8 4106 8...steel blue zinc plated 8.8 4106 1...
DIN 479
Square head boltswith short dog point
steel blank 5.6 4101 8...steel blue zinc plated 5.8 4102 1...steel blue zinc plated 8.8 4103 1...steel blank 8.8 4103 8...
DIN 125ISO 7089/7090Washers
brass blank (Type B) 0400 000...brass blank (Type A) 0400 ...Aluminium blank 0403 …steel blank 300 HV (Type A) 0405 010 0...steel blank 140 HV (Type A) 0405 ...steel blank 140 HV (Type B) 0405 99...steel black-oxided 140 HV(Type B) 0407 902...steel black-oxided 140 HV(Type A) 0407 903...steel hot-dip galvanized140 HV(Type A/B) 0407 000...steel yellow zinc plated 140 HV (Type A/B) 0407 0...steel yellow zinc plated 140 HV(Type A/B) 0407 111...steel blue zinc plated 300 HV(Type A) 0407 2000...steel blue zinc plated 300 HV(Type B) 0407 3000...steel Geomet® 321A/VL140 HV (Type A) 4628 405...steel Geomet® 321A/VL200 HV (Type A) 4628 406...steel Geomet® 321A/VL300 HV (F.A) 4628 407...A2 (Type B) 0409 00...A2 (Type A) 0409 ... A4 (Type A) 0412 ...A4 (Type B) 0412 900...Copper blank (Type A) 0412 000 0...polyamide 6.6 0412 00...
DIN 508
T-slotted nuts
steel blank 8 4460...steel blue zinc plated 8 4461...steel black-oxide 8 4462...
DIN 546
Slotted round nuts
steel blank 0337 011...steel blue zinc plated 0337 012...steel yellow zinc plated 0337 011 0...A2 0344 300...A4 0340 900...
DIN 551ISO 4766Slotted set screwswith chamfered ends
steel blank 14H 0253 30...steel blue zinc plated 14H 0253 31...steel yellow zinc plated 14H 0253 32...A1 0261 0...A4 0221 0...
DIN 553ISO 7434Slotted set screwswith cone point
steel blank 14H 0253 40...steel blue zinc plated 14H 0253 41...steel yellow zinc plated 14H 0253 42...A1 0261 9… A4 0221 9…
DIN 555ISO 4034Hexagon nuts
steel blue zinc plated 5 0337 023...
DIN 557
Square nuts(product class C)
steel blank 5 0337 000 0...steel blue zinc plated 5 0337 000 1...steel yellow zinc plated 5 0337 000 2...A2 0344 400...A4 0340 09...
DIN 558ISO 4018Hexagon head screws (engineering)
steel blank 4.6 0081 0...steel blue zinc plated 4.6 0081...
DIN 561
Hexagon head screws with small hexagon and dog point
steel blank 8.8 4107 8...steel blue zinc plated 8.8 4107 1...steel yellow zinc plated 8.8 4107 0...
DIN 562
Square nutsflat Type
steel blank 04 0337 001...steel blue zinc plated 04 0337 002...steel yellow zinc plated 0337 003...A2 0344 402...A4 0340 001...
DIN 564
Hexagon head screws with half dog poin
steel blank 8.8 4111 8...steel blue zinc plated 8.8 4111 1...steel yellow zinc plated 8.8 4111 0...
DIN 571
Hexagon head wood screws
steel, blue zinc plated 0192 ...steel, yellow zinc plated 0160 4...A2 0193 ...A4 0191 0...
DIN 580ISO 3266Lifting eye bolts
steel blank C15E 0295 90...steel blue zinc plated C15E 0295 9...steel yellow zinc plated C15E 0295 999...A2 0279...A4 0280...
DIN 582
Lifting eye nuts
steel blank C15E 0395 90...steel blue zinc plated C15E 0395 9...steel yellow zinc plated C15E 0395 999...A2 0388...A4 0389...
DIN 601ISO 4016Hexagon head bolts with nuts
steel blank 4.6 0077...steel blue zinc plated 4.6 0078...steel blue zinc plated 4.6 (ISO) 0078 91...
DIN 603
Mushroom head square neck boltswith nuts steel blank 4.8 0223 0...steel blue zinc plated 4.8 0223 ...without nuts steel blue zinc plated 4.8 0223 7...steel blue zinc plated 8.8 0223 9...A2 0226...A4 0076...similar DIN 603 steel blue zinc plated 4.8 0223 998...
DIN 604
Knurled thumb nuts flat Type
steel blank 4.6 4350 8...steel blue zinc plated 4.6 4350 1...steel blank 8.8 4351 8...steel blue zinc plated 8.8 4351 1...
DIN 608
Flat countersunk square neck bolts with nuts
steel blank 8.8 0228...
DIN 660
Round head rivets
steel blank 0922 30...steel blue zinc plated 0922 31...steel yellow zinc plated 0922 32...brass blank 0922 330...copper blank 0922 34...aluminium blank 0922 35...A2 0919 00...A4 0923 0...
DIN 661
Countersunk head rivets
steel blank 0922 400...steel blue zinc plated 0922 410...aluminium blank 0922 430...copper blank 0922 440...brass blank 0922 450...A2 0919 01...A4 0923 07...
DIN 705
Adjusting rings withset screws DIN 553
steel blank (Type A) 0425 7...steel blank (Type B) 0425 70...steel blue zinc plated (Type A) 0425 8...A2 (Type A) 0447 9...with DIN 916steel blue zinc plated (Type A) 4629 100...steel blank (Type A) 4629 800...
DIN 741
Wire rope clips
steel blue zinc plated 0520...
DIN 835
Studs
steel blank 5.8 4241...steel blue zinc plated 5.8 4242...steel yellow zinc plated 5.8 4243...steel blank 8.8 4244...steel blue zinc plated 8.8 4245...steel yellow zinc plated 8.8 4246...steel blank 10.9 4247...
DIN 906Hexagon socket pipe plugsmetrical taper thread steel blank 0241 75...steel blue zinc plated 0241 7...steel yellow zinc plated 0241 70...A4 0251 01...inch thread steel blank 0241 740 00...steel blue zinc plated 0241 870 0...steel yellow zinc plated 0241 870...A4 0251 00...
DIN 908Hexagon socket screws plugs with collarmetrical fine thread steel blank 0241 85...steel blue zinc plated 0241 8...steel yellow zinc plated 0241 80...A4 0251 03...inch thread steel blank 0241 760 0...steel blue zinc plated 0241 76...steel yellow zinc plated 0241 760...A4 0251 02...
DIN 910Hexagon head screws plugs with collarmetrical fine thread steel blank 0241 00...steel blue zinc plated 0241...steel yellow zinc plated 0241 0...A4 0251 05...inch threadsteel blank 0241 500...steel blue zinc plated 0241 5...steel yellow zinc plated 0241 50...A4 0251 04…
DIN 912ISO 4762Hexagon socket head cap screwssteel blank 8.8 0082...steel blank fully thread 8.8 0082 9...steel blue zinc plated 8.8 0084...steel blue zinc plated fully thread 8.8 0084 7...steel yellow zinc plated 8.8 0084 0...steel Geomet® 321A+VL 8.8 4109 4...steel Dacromet® 320A 8.8 4133 2...steel Dacromet® 500A 8.8 4133 3...steel blank 10.9 0080...steel blue zinc plated 10.9 0108...steel yellow zinc plated 10.9 0108 0/9...steel Geomet® 321A+VL 10.9 4134 4...steel Geomet® 500A 10.9 4111 5...steel Dacromet® 500A 10.9 4134 3...steel blank 12.9 0083...steel Geomet® 321A+VL 12.9 4135 4...steel Dacromet® 320A 12.9 4135 2...steel Dacromet® 500A 12.9 4135 3...A2-70 0094...A2-80 0094 0...A2 Serrated fully thread 0094 9...A4-70 0097...A4-80 0097 0...
DIN 913ISO 4026Hexagon socket set screws with flat point
steel blank 45H 0255...steel blue zinc plated 45H 0255 0...steel yellow zinc plated 45H 0255 6/7...A1 0261…A4 0221....
DIN 914ISO 4027Hexagon socket set screws with cone point
steel blank 45H 0256...steel blue zinc plated 45H 0256 0...steel yellow zinc plated 45H 0256 7...A1 0262...A4 0269...
DIN 915ISO 4028Hexagon socket set screws with dog point
steel, 45H, blank 0257...steel, 45H, blue zinc plated 0257 0...steel, 45H, yellow zinc plated 0 257 7...A1 0222...A4 0266...
DIN 916ISO 4029Hexagon socket set screws with cup point
steel blank 45H 0254...steel blue zinc plated 45H 0254 0...steel yellow zinc plated 45H 0254 7...A1 0244...A4 0269 9...
DIN 917
Hexagon cap nuts flat Type
steel blank 6 0357 0...steel blue zinc plated 6 0357...steel yellow zinc plated 6 0357 00...A2 0363...A4 0349 01...
DIN 920
Slotted pan head screws small Type
steel blank 5.8 0259 1...steel blue zinc plated 5.8 0259 19...
DIN 979
Hexagon slotted and castle nuts
steel blank 05 0345 9...steel blue zinc plated 05 0345 99...steel yellow zinc plated 05 0345 999...
DIN 981
Slotted nuts
steel blank 11H 0358 999 9...steel blue zinc plated 17H 0385 999...
DIN 921
Slotted pan head screws large Type
steel blank 5.8 0259 2...steel blue zinc plated 5.8 0259 29...
DIN 923
Slotted panhead screws with socket
steel blank 5.8 0259 40...steel blue zinc plated 5.8 0259 49...steel yellow zinc plated 5.8 0259 470...
DIN 927
Slotted pivot pinwith thread
steel blank 14H 4012 8...A1 4014...
DIN 928
Square weld nuts
steel blank 0385 0...A2 0306 00...A4 0304 000...
DIN 929
Hexagon weld nuts
steel blank 0399...steel blue zinc plated 0399 0...A2 0306...A4 0304...
DIN 931ISO 4014Hexagon head bolts steel blue zinc plated 5.6 0065...steel blue zinc plated 5.6 ADW 7 0065 9...steel blank 8.8 0051...steel blue zinc plated 8.8 0053...steel yellow zinc plated 8.8 0053 0...steel hot-dip galvanized 8.8 0059 6...steel Dacromet® 320A 8.8 4127 2...steel Dacromet® 500A 8.8 4127 3...steel Geomet® 321A+VL 8.8 4127 4...steel blank 10.9 0052...steel blue zinc plated 10.9 0105 0...steel yellow zinc plated 10.9 0105...steel Dacromet® 320A 10.9 4128 2...steel Dacromet® 500A 10.9 4128 3...steel Geomet® 321A+VL 10.9 4128 4...steel blank 12.9 0054...steel Dacromet® 500A 12.9 4129 3...A2-70 0095...A2-70 ADW 2 0093 0...A2-80 0095 0...A4-70 0090...A4-70 ADW 2 0092 0...
DIN 933ISO 4017Hexagon screwsbrass 0001 80...brass nickel-plated 0001 90...polyamide 6.6 0278 03...steel blank 8.8 0055 ...steel blue zinc plated 8.8 0057...steel yellow zinc plated 8.8 0057 0...steel hot-dip galvanized 8.8 0059 7...steel Dacromet® 320A 8.8 4130 2...steel Dacromet® 500A 8.8 4130 3...steel Geomet® 321A+VL 8.8 4130 4...steel blank 10.9 0056...steel blue zinc plated 10.9 0107 0...steel yellow zinc plated 10.9 0107...steel Dacromet® 320A 10.9 4131 2...steel Dacromet® 500A 10.9 4131 3...steel Geomet® 321A+VL 10.9 0102 1...steel blank 12.9 0061...steel Dacromet® 320A 12.9 4132 2...steel Dacromet® 500A 12.9 4132 3...steel Geomet® 321A+VL 12.9 4132 4...A2-70 0096...A2-80 0096 0...A2 ADW 2 0093 1...A4-70 0091...A4 ADW 2 0092 1...A4-80 0091 0...
DIN 934ISO 4032Hexagon nuts
brass 0300...brass nickel-plated 0307...polyamide 6.6 0323...steel blank 5-2 0065 800...steel blue zinc plated 5-2 0065 01...steel blank 8 0310...steel blue zinc plated 8 0317... steel yellow zinc plated 8 0317 0...steel hot-dip galvanized 8 0317 000...steel Dacromet® 320A 8 4524 2...steel blank 10 0320...steel blue zinc plated 10 0324 0...steel yellow zinc plated 10 0324 00...steel Geomet® 321A+VL 10 0102 1...steel zinc nickel 10 0263 0...A2 0322...A2 ADW 2 0322 999 9...A4 0326...A4 ADW 2 0326 999 9...
DIN 935ISO 7035Hexagon slotted and castle nutssteel blank 8 0345 0...steel blank 6 0345 1...steel blue zinc plated 8 0345...steel yellow zinc plated 8 0345 00...steel blank 10 0345 2...steel blue zinc plated 10 0345 22...A2 0339...A4 0340...
DIN 936ISO 4035Hexagon nutsflat Type
steel blank 04 0319 73...steel blue zinc plated 04 0319...steel yellow zinc plated 04 0319 01...steel blank 6 0319 76...steel blank 17H 0319 7...steel blue zinc plated 17H 0319...steel yellow zinc plated 17H 0319 0...steel blue zinc plated22H 0319 80...steel yellow zinc plated 22H 0319 81...
DIN 937ISO 7038Hexagon slotted and castle nuts flat Typesteel blank17H 0345 6...steel blue zinc plated 17H 0345 66...steel yellow zinc plated 17H 0345 666...steel blank 22H 0345 7/8...steel blue zinc plated 22H 0345 77...steel yellow zinc plated 22H 0345 88...A2 0339 0...A4 0340 00...
DIN 938
Studs
steel blank 8.8 0258 3...steel blue zinc plated 8.8 0258 4...steel yellow zinc plated 8.8 0258 5...steel blank 10.9 0258 6...steel blue zinc plated 10.9 0258 7...steel yellow zinc plated 10.9 0258 8...A2 0272 9...A4 0277 9...
DIN 939
Studs
steel blank 5.8 0250...steel blue zinc plated 5.8 0250 6...steel yellow zinc plated 5.8 0250 5/7...steel blank 8.8 0250 8...steel blue zinc plated 8.8 0250 0...steel yellow zinc plated 8.8 0250 9...steel blank 10.9 0250 1...steel blue zinc plated 10.9 0250 2...steel yellow zinc plated 10.9 0250 3/4...A2 0272...A4 0277...
DIN 960ISO 8765Hexagon thin head bolds with thread
steel blank 8.8 0063 5...steel blue zinc plated 8.8 0063 6...steel yellow zinc plated 8.8 0063 3/7...steel blank 10.9 0063 0...steel blue zinc plated 10.9 0063 4...steel yellow zinc plated 10.9 0063 /9...steel zinc nickel 10.9 0263 4...
DIN 961ISO 8676Hexagon thin head bolts
steel blank 8.8 0067 2...steel blue zinc plated 8.8 0067 3...steel yellow zinc plated 8.8 0067 5...steel blank 10.9 0067 6...steel blue zinc plated 10.9 0067 4...steel yellow zinc plated 10.9 0067...steel zinc nickel 10.9 0263 5...
DIN 963ISO 2009Slotted countersunk head screwsbrass blank 0000...brass nickel-plated 0000 9...steel blank 4.8 0039 0...steel blue zinc plated 4.8 0039...steel yellow zinc plated 4.8 0039 7...steel nickel-plated 4.8 0039 1...steel blank 8.8 0039 01...steel blue zinc plated 8.8 0039 9...A2 0286...A4 0288...
DIN 964ISO 2010Slotted raised countersunk (oval) head screwsbrass blank 0021 0...brass nickel-plated 0021...steel blank 4.8 0044 3...steel blue zinc plated 4.8 0044...steel yellow zinc plated 4.8 0044 00...steel nickel 4.8 0044 4...steel nickel chrome 4.8 0044 2...steel brass-plated 4.8 0044 1...A2 0290...A4 0296...
DIN 965ISO 7046Countersunk head screws
with cross slot Hsteel blank 4.8 0048 0...steel blue zinc plated 4.8 0048...steel yellow zinc plated 4.8 0048 1...steel nickel-plated 4.8 0048 5...steel blank 8.8 0048 600...steel blue zinc plated 8.8 0048 610...A2 0281...A4 0298...
with cross slot Zsteel blank 4.8 0048 11...steel blue zinc plated 4.8 0048 4...steel yellow zinc plated 4.8 0048 3...A2 0281 0...A4 0298 01...
DIN 966ISO 7047Raised countersunk head screwswith cross slot Hsteel blank 4.8 0049 7...steel blue zinc plated 4.8 0049...steel yellow zinc plated 4.8 0049 0...steel nickel-plated 4.8 0049 12...steel nickel chrome 4.8 0049 11...A2 0282... A4 0294...with cross slot Z steel blank 4.8 0049 40...steel blue zinc plated 4.8 0049 41...A2 0282 9...
DIN 976
Stud boltsbrass blank (Type A) 0951...brass nickel-plated (Type A) 0951 19…polyamide 6.6 (Type A) 0952...steel blank 4.8 (Type A) 0950...steel blue zinc plated 4.8 (Type A) 0958...steel blank 8.8 (Type A) 0959 11...steel blue zinc plated 8.8 (Type A) 0959 00...steel yellow chrome-plated 8.8 (Type A) 0959 9...steel blank 10.9 (Type A) 0959 000...A2 (Type A) 0954...A4 (Type A) 0953...
DIN 980ISO 7042Prevailing torque type self-locking nutssteel blue zinc plated 8 (Type V) 0369...steel yellow zinc plated 8 (Type V) 0369 101... steel yellow zinc plated 10 (Type V) 0369 00...steel 8 copper-plated (Type V) 0369 10...steel Dacromet® 320A 8 4525 20...steel zinc nickel I10I (Type V) 0263 00...A2 zinc-plated 0380...A4 0397 02...
DIN 982ISO 7040Self-locking hexagon nuts (nylon insert) domed type
steel blue zinc plated 8 0371...steel yellow zinc plated 8 0371 78...steel blue zinc plated 10 0371 781...steel yellow zinc plated 10 0371 71...A2 0391 0...A4 0397 0...
DIN 983
Retaining rings with lugs for shafts
steel blank (Type AK) 0438 3...
DIN 984
Retaining rings with lugs for bores
steel blank (Type IK) 0439 3...
DIN 985ISO 10511Prevailing torque type nuts (nylon insert)
steel, I8I, blue zinc plated 0368 ...steel, I8I, yellow zinc plated 0368 0...steel, I8I, blue zinc plated (UNC) 0375 ...steel, I8I, blue zinc plated (UNF) 0378 ...steel, 10, blue zinc plated 0370 0...steel, 10, yellow zinc plated 0370 ...A2 0391 ...A4 0397 ...
DIN 986Self-locking domed cap nuts (synthetical insert)
steel blank 6 0357 701...steel blue zinc plated 6 0357 702...steel yellow zinc plated 6 0357 703/4...steel blank 8 0357 711...steel blue zinc plated 8 0357 712...steel yellow zinc plated 8 0357 713/714...steel blue zinc plated 10 0357 901...steel yellow zinc plated 10 0357 903...A2 0348 0...
DIN 988
Shim rings
adjusting washersteel blank 0425...steel blue zinc plated 0425….6...A2 0415 9...supporting washersteel blank 0425 000...A2 0415 90...
DIN 1142
Wire rope clips
steel yellow zinc plated 0520 0...
DIN 1151
Brad
steel blank 0478 5...steel blue zinc plated 0478 6...
DIN 1254
Fitting
conner 4995...
DIN 1434
Clevis pins with head (Type B)
steel blue zinc plated 0260 00...
DIN 1440ISO 8738Washers for clevis pins
steel blank 0496...steel blue zinc plated 0496 000...steel yellow zinc plated 0496 0...A2 0409 911...A4 0412 905…
DIN 1441
Washers for clevis pins
steel blank 0496 9...steel blue zinc plated 0496 90...steel yellow zinc plated 0496 900
DIN 1471ISO 8744Grooved pins,full-length taper grooved
steel blank (ISO) 0248 50...steel blue zinc plated(ISO) 0248 51...A1 0267 1...
DIN 1472ISO 8745Grooved pins, half-length taper grooved
steel blank (ISO) 0248 60...steel blue zinc plated (ISO) 0248 61...steel yellow zinc plated (ISO) 0248 62...A2 0267...
DIN 1473ISO 8740Grooved pins, full-length parallel grooved, with chamfer
steel blank (ISO) 0248 10...steel blue zinc plated (ISO) 0248 11...steel yellow zinc plated (ISO) 0248 12...A2 0267 3...
DIN 1474ISO 8741Grooved pins, half-length reverse-taper grooved
steel blank (ISO) 0248 20...steel yellow zinc plated (ISO) 0248 22...A2 0267 90...
DIN 1479
Hexagon turnbuckle
steel blue zinc plated 4 468...
DIN 1480
Turnbuckles nuts for turnbucklesteel blue zinc plated 0521 000...with iron studsteel blank 0521 010...steel blue zinc plated 0521 01...with eyesteel blue zinc plated 0521 02...with fastening and eyesteel blue zinc plated 0521 03...
DIN 1587
Hexagon domed cap nuts
brass blank 0350...brass nickel chrome 0352...steel blue zinc plated 0356...steel yellow zinc plated 0356 61...A2 0348...A4 0349...
DIN 1804
Slotted nuts (thin metricalISO thread)
steel blank 0385 9...steel blue zinc plated 0385 90...
DIN 2093
Disc springs
steel blank 0436 …
DIN 2097
Tension springs
steel blank 0506 2...
DIN 2982
Pipe double fittings
steel blank 4982...
ISO 4014
Hexagon screws with shank steel blank 5.6 0065 8...steel blue zinc plated 5.6 0065 9...steel blank 6.8 4 120 1...steel blank 8.8 0051 9...steel blue zinc plated 8.8 0053 9...steel yellow zinc plated 8.8 0053 90...steel Geomet® 321A+VL 8.8 4 136 4...steel blank 10.9 0052 9...steel blue zinc plated 10.9 0105 9...steel yellow zinc plated 10.9 0105 7...steel Geomet® 321A+VL 10.9 4 137 4...steel blank 12.9 0054 9...A2-70 0095 9...A4-70 0090 9...
ISO 4017
Hexagon screws
steel blank 5.6 0065 7...steel blue zinc plated 5.6 0065 0...steel blue zinc plated 6.8 4 121 1...steel blank 8.8 0055 9...steel blue zinc plated 8.8 0057 9...steel yellow zinc plated 8.8 0057 90...steel 321A+VL 8.8 4 139 4...steel blank 10.9 0056 9...steel blue zinc plated 10.9 0107 9...steel yellow zinc plated 10.9 0107 7...steel Geomet® 321A+VL 10.9 4 140 4...A2-70 0096 9...A4-70 0091 9...
ISO 4032
Hexagon nuts
brass blank 0300 9...brass nickel-plated 0307 9...steel blank 5-2 0065 801 0...steel blank 8 0310 9...steel blue zinc plated 8 0317 9...steel yellow zinc plated 8 0317 8/0317 900steel galvanized 8 0317 99...steel blank 10 0320 9...steel blue zinc plated 10 0324 90...steel yellow zinc plated 10 0324 99...A2-70 0322 9...A4-70 0326 9...ADW7steel blue zincplated 5-2 0065 901...
DIN 5299
Snap carabiner
steel blue zinc plated(Type C) 0524...A2 (Type C) 0524 0...
DIN 5406
Tab washer
steel blank 0385 999 8...
DIN 5417
Round wire snap rings
steel blank 0490 0...
DIN 6319
Rounded washer - ball socket
steel blank (Type C) 0436 9...steel blue zinc plated(Type C) 0436 900...steel blank (Type D) 0436 99...steel blue zinc plated (Type D) 0436 990 0...steel blank (Type G) 0436 99...steel blue zinc plated (Type G) 0436 000...
DIN 6325ISO 8734Parallel pin,hardened steel blank 0252 0…
DIN 6330
Hexagon nuts, 1,5 d
steel blank 10 0369 9...A2 0372 900...A4 0349 901...
DIN 6331
Hexagon nuts, 1,5 d with collar
steel blank 10 0369 8...steel blue zinc plated 10 0369 800...A2 0372...A4 0349 902...
DIN 6340
Washers for clamping devices
steel blank 0495... steel blue zinc plated 0495 0...
DIN 6796
Conical spring washers
steel blank 0413 3...steel mechanical zinc plated 0413 1...steel mechanical zinc plated yellow 0413 2...A2 0431 00...A4 0432 00...
DIN 6797
Toothed lock washers
external toothedsteel blank (Type V) 0423 00...steel blue zinc plated (Type V) 0423 0...steel blank (Type AZ) 0423 0...steel blue zinc plated (Type AZ) 0423...steel yellow zinc plated (Type AZ) 0423 000...A2 (Type AZ) 0431 021...internal toothedsteel blank (Type JZ) 0424 0...steel blue zinc plated (Type V) 0424 ...steel blank (Type AZ) 0424 00...steel blue zinc plated (Type JZ) 0424...steel yellow zinc plated (Type JZ) 0424 00...A2 (Type IZ) 0431 022...A4 0432 00...A4 (Type IZ) 0432 1...
DIN 6798
Serrated lock washers
steel blue zinc platedinternal/external 0446 …external toothedsteel blank 0429 00…steel blank (Type V) 0430 00… steel blue zinc plated 0429 …steel blue zinc plated(Type V) 0430 …steel yellow zinc plated 0429 0…steel yellow zinc plated(Type V) 0430 000 …A2 0431 2…A2 (Type V) 0431 3…A4 0432 2…internal toothedsteel blue zinc plated 0428 …A2 0431 1…A4 0432 1…
DIN 6799
Retaining washers for shafts
steel blank 0490 0...steel blue zinc plated 0490 04...steel yellow zinc plated 0490 1...magazinedsteel blank 0490 0...steel blue zinc plated 0490 03...steel yellow zinc plated 0490 100...stainless steel 1.4122 0431 01...
DIN 6885
Parallel keys
domedsteel blank C45K (Type A) 0410...steel blank C45K (Type AB) 0410 8...steel blank C45K (Type B) 0410 7...steel blank C45K (Type C) 0410 9...steel blank C45K (Type E) 0410 6...A4 (Type A) 0406...
flat Typesteel blank C45K (Type A) 0426 0...steel blank C45K (Type B) 0426 1...steel blank C45K (Type AB) 0426 2...steel blank C45K (Type E) 0426 4...
DIN 6899
Steel thimbles for ropes
steel blue zinc plated (Type A) 0522...steel blue zinc plated (Type B) 0522 0...
DIN 6912
Hexagon socket head cap screws centre hole and low head
steel blank 8.8 0088...steel blue zinc plated 8.8 0086...steel yellow zinc plated 8.8 0086 0/7...steel blank 10.9 0109...steel blue zinc plated 10.9 0109 3...steel yellow zinc plated 10.9 0109 7...A2-70 0098...A4-70 0099...
DIN 6917
Square taper washers for I-Sections steel hot-dip galvanized 0079 03...
DIN 6918
Square taper washers for U-Sections
steel hot-dip galvanized 0079 04...
DIN 6921
Hexagon flange bolts
steel blank 8.8 4125 8...steel blue zinc plated 8.8 0273 9...steel yellow zinc plated 8.8 4125 0...steel blank 10.9 4126 8...steel blue zinc plated 10.9 4126 1...A2-70 0101 0...
DIN 6923ISO 4161Hexagon flange nuts
steel blank 8 0394 00...steel blue zinc plated 8 0379 000 0...steel yellow zinc plated 8 0379 000...
DIN 6924ISO 7040
Prevailing torque type nuts, non-metallic insert
steel blue zinc plated 8 0371 984... steel yellow zinc plated 8 0371 983...steel blank 10 0371 911...steel yellow zinc plated 10 0371 91...
DIN 6925ISO 7042
Prevailing torque type nuts, all metal nuts
steel blank 8 0369 781...steel blue zinc plated 8 0369 784...steel yellow zinc plated 8 0369 782...steel blue zinc plated 10 0369 711...steel yellow zinc plated 10 0369 712...steel copper-plated 10 0369 715...
DIN 7346ISO 8749
Slotted spring-type straight pins
steel blank 0475 90...steel blank (ISO) 0248 70...steel blue zinc plated (ISO) 0248 71...steel yellow zinc plated (ISO) 0248 72/73...A2 0267 60...
DIN 7349
Washers for bolt with heavy type spring pins
steel blank 0497...steel blue zinc plated 0497 0...steel black-oxide 0497 9...steel yellow zinc plated 0497 00...A2 0409 915...A4 0412 909...
ISO 7379
Hexagon socket head shoulder screws
steel blank F9 12.9 4118 8...steel blank H8 12.9 4119 8...
ISO 7380
Button head socket screwssteel blank 10.9 0060 02...steel blue zinc plated 10.9 0060 01...steel blank TX 10.9 4211 8...steel blue zinc plated TX 10.9 4211 1...A2-70 0098 01...A4-70 0099 01...A2-70 TX 4212...
Similar ISO 7380
Button head socket flange screwssteel blank 10.9 0060 03...steel blue zinc plated 10.9 0060 00...steel blank TX 10.9 4213 8...steel blue zinc plated TX 10.9 4213 1...steel yellow zinc plated 10.9 0060 09...steel black plated 10.9 0060 0...A2-70 0098 02...A2-70 TX 4214...
DIN 7500Thread-rolling screwsGefu 1 steel blue zinc plated (Type CE) Z 0205 5...steel blue zinc plated (Type ME) Z 0209 6...steel blue zinc plated (Type CE) TX 0209 57...steel blue zinc plated (Type ME) TX 0209 67...steel yellow zinc plated (Type CE) Z 0209 500...Gefu 2steel blue zinc plated (Type CE) Z 0209 1...steel blue zinc plated (Type ME) Z 0209 2...steel blue zinc plated (Type CE) TX 0209 17...steel blue zinc plated (Type ME) TX 0209 27...steel blue zinc plated flange 0209 3...steel blue zinc plated (Type EE) 0209 4...steel yellow zinc plated (Type CE) Z 0209 100...steel yellow zinc plated flange 0209 30...steel yellow zinc plated (Type EE) 0209 40...Thread forminsteel blue zinc plated (Type CE) TX 4016 1...steel black chrome-plated (Type CE) TX 4016 7...steel blue zinc plated (Type ME) Z 4017 1...steel black chrome-plated (Type ME) Z 4017 7...steel blue zinc plated (Type ME) TX 4018 1...steel blue zinc plated flange 4019 1...steel blue zinc plated (Type EE) 4020 1...steel yellow zinc plated (Type CE) Z 4015 0...steel black chrome-plated (Type CE) Z 4015 7...steel yellow zinc plated (Type CE) TX 4016 0...steel yellow zinc plated (Type ME) TX 4018 0...steel yellow zinc plated flange 4019 0...steel yellow zinc plated (Type EE) 4020 0...
DIN 7604
screwsed sealing plug
steel blank 0240 0...steel blue zinc plated 0240...steel yellow zinc plated 0240 9...
DIN 7971ISO 1481
Slotted panhead tapping screws
steel blue zinc plated (Type F) 0110 10...steel yellow zinc plated (Type F) 0110 11...steel nickel-plated (Type F) 0110 14...steel blue zinc plated (Type C) 0110...steel yellow zinc plated (Type C) 0110 01...steel nickel-plated (Type C) 0110 04...A2 (Type C) 0120 1...
DIN 7972ISO 1482
Slotted countersunk head tapping screws
steel blue zinc plated (Type F) 0110 30...steel blue zinc plated (Type C) 0110 20...steel yellow zinc plated (Type F) 0110 31...A2 (Type C) 0120 3...
DIN 7973ISO 1483
Slotted raised countersunk head tapping screws
A2 (Type C) 0120 2...
DIN 7976ISO 1479
Hexagon head tapping screws
steel blue zinc plated (Type F) 0114 10...steel yellow zinc plated (Type F) 0114 11...steel blue zinc plated (Type C) 0114...steel yellow zinc plated (Type C) 0114 01...A2 (Type C) 0122...
DIN 7978ISO 8736
Taper pins with internal thread
steel blank (Type A) 0247...
DIN 7979ISO 8733/8735
Parallel pins with internal thread
steel blank (Type C) 0247 7...steel blank (Type D) 0247 0...
DIN 7980
Spring lock washers for screws with cylindrical head steel blank 0443 0...steel blue zinc plated 0443...steel yellow zinc plated 0443 000...A2 0447 0...A4 0445 90...
DIN 7981ISO 7049Pan head tapping screwscross recess H steel blue zinc plated (Type F) 0115 10...steel blue zinc plated (Type C) 0115...steel yellow zinc plated (Type C) 0115 01...steel yellow zinc plated (Type F) 0115 11...steel black plated (Type F) 0115 13...steel black plated (Type C) 0115 23...steel nickel-plated (Type C) 0115 04...steel nickel-plated (Type F) 0115 14...A2 (Type C) 0119...A2 (Type F) 0119 01...A2 Geomet® (Type C) 0119 8...A4 (Type C) 0127 1...cross recess Zsteel blue zinc plated (Type F) 0115 30...steel blue zinc plated (Type C) 0115 20...steel yellow zinc plated (Type C) 0115 21... steel yellow zinc plated (Type F) 0115 31...steel black plated (Type F) 0115 33...steel black plated (Type C) 0115 23...A2 (Type C) 0119 05...A2 (Type F) 0119 06...
DIN 7982ISO 7050
Countersunk head tapping screws
cross recess Hsteel blue zinc plated (Type C) 0116...steel blue zinc plated (Type F) 0116 10...steel yellow zinc plated (Type C) 0116 0...steel black plated (Type C) 0116 03...steel nickel-plated (Type C) 0116 24...A2 (Type C) 0123...A2 (Type F) 0123 01...A2 Geomet® (Type C) 0123 8...A4 (Type C) 0127 2...
cross recess Zsteel blue zinc plated (Type C) 0116 20...steel blue zinc plated (Type F) 0116 30...steel black plated (Type C) 0116 23...steel black plated (Type F) 0116 33...A2 (Type C) 0123 05...
DIN 7983ISO 7051
Raised countersunk head tapping screws
cross recess Hsteel blue zinc plated (Type C) 0117...steel blue zinc plated (Type F) 0117 10...steel yellow zinc plated (Type C) 0117 0...steel black plated (Type C) 0137...A2 (Type F) 0124 01...A4 (Type C) 0127 3...
cross recess Zsteel blue zinc plated (Type C) 0117 20...steel black plated (Type C) 0117 13...A2 (Type C) 0124 05...
DIN 7984
Hexagon socket head cap screws with low head
steel blank 8.8 0085...steel blue zinc plated 8.8 0085 0...steel yellow zinc plated 8.8 0085 6/9...steel blank 10.9 0085 7...steel blue zinc plated 10.9 0085 5...steel yellow zinc plated 10.9 0085 8...A2-70 0292...A4-70 0297...
DIN 7985ISO 7045
Slotted pan head screws
cross recess Hsteel blank 4.8 0046 0...steel blue zinc plated 4.8 0046...steel yellow zinc plated 4.8 0046 10...steel blank 8.8 0046 000...steel blue zinc plated 8.8 0046 010...steel chrome plated 4.8 0046 2...steel nickel-plated 4.8 0046 9...A2-70 0283...A4-70 0293...cross recess Zsteel blank 4.8 0046 11...steel blue zinc plated 4.8 0046 41...steel yellow zinc plated 4.8 0046 3...steel blank 8.8steel blue zinc plated 8.8 0046 42...steel yellow zinc plated 8.8 0046 32...steel nickel-plated 4.8 0046 8...A2-70 0283 9...A4-70 0293 9...
DIN 7989
Washers for steel constructions
product class Asteel blank 0449 9...steel blue zinc plated 0449 99...steel yellow zinc plated 0449 999...steel hot-dip galvanized 0449 7...
product class Csteel blank 0449 0...steel blue zinc plated 0449...steel yellow zinc plated 0449 00...steel hot-dip galvanized 0047 02...A2 0409 914...A4 0412 908...
DIN 7990
Hexagon bolts and nuts for steel structures
steel hot-dip galvanized 4.6 0074...
DIN 7991ISO 10642
Hexagon socket countersunk head screwssteel blank 8.8. 0087 0...steel blue zinc plated 8.8 0087...steel yellow zinc plated 8.8 0087 7/9...steel blank 10.9 0089...steel blue zinc plated 10.9 0089 0...steel yellow zinc plated 10.9 0089 7/9...A2-70 0100...A4-70 0299...
DIN 7993
Round wire snap rings for bores
steel blank (Type A) 0490 00...steel blank (Type B) 0490 000...A2 (Type A) 0489 100 0...
DIN1475ISO 8742
Third length centre grooved pin
steel blank (ISO) 0248 30...zinc plated (ISO) 0248 31...
DIN 1476ISO 8746
Round head grooved pin
steel blank 0248 70...steel blue zinc plated 0248 71...steel yellow zinc plated 0248 72/73...A2 0267 600...
DIN 1477ISO 8747
Countersunk head grooved pin
steel blank 0248 800...steel blue zinc plated 0248 81...steel yellow zinc plated 0248 82...
DIN 7344ISO 8748
Spiral pin heavy Type
steel blank 0475 8...steel blue zinc plated 0475 8….9...
DIN 7343 ISO 8750
Spiral pin standard design
steel blank 0475 0...A2 0267 4...
DIN 1481ISO 8752
Slotted spring pin heavy Type
steel blank 0475...steel blue zinc plated 0475 0...A2 0467...
DIN 9021ISO 7093
Plain washers
steel blank 140 HV 0417...steel blue zinc plated 140 HV 0416...steel yellow zinc plated 140 HV 0416 0...steel black plated 140HV 0416 000...brass blank 0418... Polyamide 0421 0...A2 0419...A4 0412 92...
ISO 13918
Weld stud
steel copper-plated 4.8(Type PT) 4476...A2 (Type PT) 4477...
DIN EN 14399-4
Hexagon screws with high strength structural bolt
steel hot-dip galvanized 10 0079 05...
DIN EN 14399-4
Hexagon nuts with high strength structural bolt
steel hot-dip galvanized 10.9 0079 4...
DIN EN 14399-6
Washers
steel hot-dip galvanized 0079 06...
ISO 14580
Hexagon socket head cap screws
steel blank 8.8 4000 8...steel blue zinc plated 8.8 4000 1...steel yellow zinc plated 8.8 4000 0...steel blue zinc plated 10.9 4001 1...A2-70 4002...
ISO 14583
hexagon pan head screws
steel blank 8.8 4004 8...steel blue zinc plated 8.8 4004 1...steel blue zinc plated 10.9 4005 1...steel yellow zinc plated 8.8 4004 0...A2-70 4006...A4-70 4007...
ISO 14584
Hexagon raised countersunk head screws
steel blank 8.8 4008 8...steel blue zinc plated 8.8 4008 1...steel yellow zinc plated 8.8 4008 0...
ISO 14585
Hexagon pan head tapping screws
steel blue zinc plated (Type C) 4209 1...steel blue zinc plated (Type F) 4210 1...steel black plated (Type F) 4210 7...
ISO 14586
Hexagon countersunk flat head tapping screws
steel blue zinc plated (Type C) 4202 1...steel blue zinc plated (Type F) 4203 1...A2-70 (Type C) 4204...
EN 22341
Stud with head
steel blank (Type A) 4412...steel blue zinc plated (Type A) 4413...steel yellow zinc plated (Type A) 4414...steel blank (Type B) 4415...steel blue zinc plated (Type B) 4416...steel yellow zinc plated (Type B) 4417...
DIN 71412
Lubricating nipples
steel blue zinc plated 0986...
DIN 71412
Lubricating nipples
steel blue zinc plated 0986...
DIN 71751
Knuckle jointor steel fork head
steel blue zinc plated 0268 0...
DIN 71752
Clevis
steel blank 4401...steel blank LH 4404...steel blue zinc plated 4402...steel blue zinc plated LH 4405...steel yellow zinc plated 4403...steel yellow zinc plated LH 4406...
DIN 74361
Hexagon nuts high Type with collar
steel blank limes ring 0444...steel blank A 10 0360...steel blue zinc plated A 8 0360 00...steel blue zinc plated B 10 0361 00...steel yellow zinc plated A 10 0360 0...steel yellow zinc plated B 10 0361 0...
DIN 80705
Hexagon nuts with small pattern hex nuts
steel blank 14H 4451...steel black-oxide 14H 4452...steel blue zinc plated 14H 4453...steel yellow zinc plated 14H 4454...
DIN 82101
Shackles
steel blue zinc plated 0523...
W-0071
Hexagon head screws UNF/SAE
steel blue zinc plated Grade 5 0071...
W-0072
Hexagon head screws UNC/USS
steel blue zinc plated Grade 5 0072...
W-0111similar DIN 7981/similar ISO 7049Self tapping screws with AW recess steel blue zinc plated (Type C) 0111 2...steel Delta Sealblack (Type C) 0111 3...A2 (Type C) 0119 99...A4 slide coating (Type C) 0127 5...
W-0125similar DIN 7982/similar ISO 7050Self tapping screws with AW recess steel blue zinc plated (Type C) 0112 5...A2 (Type C) 0123 9...
W-0112 3similar DIN 7983/similar ISO 7051Self tapping screws with AW recess steel Delta Sealblack (Type C) 0112 3...
W-0138
Plastofast® raised headscrews with combi recess
steel blue zinc platedcombi 0138 10...steel blue zinc plated Z 0138 11...
W-0238
Gland withvulcanized sealing washer
A2 0238 0...A2 copper-plated 0238 5...A2 varnished 0238 80...
W-0263
Hexagon flange screws according to MBN 10105
steel DBL 9440.40 10.9 0263 1...
W-0263
Prevailing hexagon flange nuts according to MBN 13023
steel DBL 9440.40 10 0263 91...
W-0263/0273
Hexagon nuts with ripp flange
steel blank 100 0273 90...steel yellow zinc plated 10.9 0273 0...Acero zinc nickel 0263 21...steel Geomet® 321A+VL 100 0263 3...steel yellow zinc plated 100 0273...
W-0263/0273
Hexagon nuts with ripp-flange
steel blank 10 0273 9...steel yellow zinc plated 10 0273...steel zinc-nickel 10 0263 92...steel Geomet® 321A+VL 10 0263 93...
W-0265
Security screws with recess AW and sealing plug
metrical threadsteel blue zinc plated 0265 1...dowel threadsteel blue zinc plated 0265 2...steel Ruspert 0265 02...A2 0265 5...with wood threadsteel blue zinc plated 0265 3...steel Ruspert 0265 03...with wood thread and pinsteel blue zinc plated 0265 7...
W-0274
Hexagon head lock screws
steel blue zinc plated 8.8 0274 0...steel yellow zinc plated 8.8 0274...
W-0284Tamper-proofsecurity screws with torx and pin
tapping screws with countersunk headA2-70 0284 01...tapping screws with raised headA2-70 0284 02...metrical hexagon screws with countersunk head A2-70 0284 0...metrical screws with truss-head A2-70 0284...wood screws A2 0284 9...
W-0330
Hexagon nuts UNC/USS
steel blue zinc plated 8 0330...
W-0331
Hexagon nuts UNF/SAE
steel blue zinc plated 8 0331...
W-0394
Locking nuts
steel blue zinc plated 8 0394 0...steel yellow zinc plated 8 0394...A2 0387 000 0...
W-0401
Safety washers
safety washerssteel Geomet® (Type K) 0401 000...steel Geomet® (Type M) 0401...steel Geomet® (Type S) 0401 000 1...steel Geomet® (Type Z) 0401 0...A4 (Type M) 0404...A4 (Type K) 0404 903...A4 (Type B) 0404 902...A4 (Type S) 0404 901...A4 (Type Z) 0404 0...
W-0401/W-0404
Tapered washers
steel Delta Protect 0401 780 0…steel Delta Protect (Type F) 0401 770 0...A4 (Type SP) 0404 701 1...
W-0411
Plain washers
steel blue zinc plated 0411... steel yellow zinc plated 0411 0...
W-0493/W-0404
Safety washers type S
steel blank (Type S) 0493...steel blank (Type VS) 0493 9...steel blue zinc plated (Type S) 0493 0...steel blue zinc plated (Type VS) 0493 90...steel yellow zinc plated (Type S) 0493 00...steel yellow zinc plated (Type VS) 0493 99...steel mechn.vz (Type S) 0493 0...steel Geomet® 500B (Type S) 0493 70...steel Geomet® 321B (Type VS) 0493 700...steel Geomet® 500B (Type VS) 0493 700 0steel Dacromet® 300 (Type VS) 0493 900...steel Dacromet® 500 (Type S) 0493 909...steel Dacromet® 500 (Type VS) 0493 900 0A2 (Type S) 0404 80...A2 (Type VS) 0404 800...
W-0974
Spacer socket
hexagonsteel blue zinc plated 0974...roundedsteel blue zinc plated 0974 0...
W-0200/W-0201
Facade construction screws
type Asteel blue zinc plated 0200 065..A2 0201...type BZsteel blue zinc plated 0200 63...A2 0201...
W-0205
ZEBRA®pias® raised countersunk head drilling screws with recess AW
countersunk head steel blue zinc plated 0205 7...A2 0205 8...raised countersunk headsteel blue zinc plated 0205...A2 0205 1...
W-0206
ZEBRA®pias® /piasta®
raised head drilling screws with recess AW
ZEBRA®pias® steel blue zinc plated 0206...A2 0206 1...ZEBRA®pias® Bimetal, Ruspert 0206 8...
W-0207
Self drilling screws with pan head and recess AW steel blue zinc plated 0207 02...
W-0214
Hexagon self drilling screwsZEBRA®pias®/piasta®
with collar (sim. DIN 7504-K)
PIAS steel blue zinc plated 0214...steel blue zinc plated slotted 0214 04...steel blue zinc platedwith reduced drilling-bit 0214 248...steel blue zinc platedwith overlong drilling-bit 0214 055...A2 0214 1...
PIASTABimetal Ruspert 0214 8...Bimetal Ruspertwith reduced drilling-bit 0214 8...steel blue zinc plated with overlongdrilling-bit 0214 8...
W-0215
ZEBRA® wing pias®
countersunk cut headand recess AW
Bimetal, Ruspert 0215...
W-0217
ZEBRA® wing pias®
(roof constructions)
PIAS steel Ruspert 0217 1...steel Dacromet® 500 0217 2...
W-0218
ZEBRA® pias® self drilling raised head flange screws with recess AWrecess AWsteel blue zinc plated 0218 1...steel Delta Seal black 0218 7...recess Hsteel blue zinc plated 0218...steel black plated 0218 2...
W-0219
ZEBRA® wing-pias® self drilling countersunk screws with recess AWsteel Ruspert 0219 7...with milled ripssteel Ruspert 0219 00...steel yellow zinc plated 0219 11...steel Ruspert (small head) 0219 8...steel Ruspert (large head) 0219 6...with countersunk headsteel Ruspert 0219 0/9...
Standard rivets
Rivet, mushroom head
sleeve: steel blue zinc platedmandrel: steel blue zinc plated 0935...sleeve: aluminium blank mandrel: steel blue zinc plated 0936/0937...sleeve: aluminium blankmandrel: aluminium blank 0937 7...sleeve: aluminium blankmandrel: stainless steel A2 0939...sleeve: Copper mandrel: steel blue zinc plated 0940...sleeve: Coppermandrel; Bronze copper zinc 0941...sleeve: stainless steel A2mandrel: stainless steel A2 0931...
Standard rivets
rivet, large snap head
sleeve: aluminium blankmandrel: steel blue zinc plated 0944...sleeve: aluminium schw.varnishedmandrel: steel blue zinc plated 0936 1...sleeve: aluminium blankmandrel:stainless steel A2 0939 15...
Standard rivets
Rivet with countersunk head
sleeve: aluminium blank mandrel: steel blue zinc plated 0938...
Middle strength rivets ZEBRA® All purpose rivet with mushroom head
sleeve: steel blue zinc plated mandrel: steel blue zinc plated 0916...sleeve: aluminium blankmandrel: steel blue zinc plated 09155/30...sleeve: aluminium white varnishedmandrel: steel blue zinc plated 0915 58...sleeve: aluminium black eloxiertmandrel: steel blue zinc plated 0915 59...sleeve: aluminium brown varnishedmandrel: stainless steel A2 0915 7...sleeve: aluminium white varnishedmandrel: stainless steel A2 0915 77...sleeve: aluminium blankmandrel: stainless steel A2 0914..
Middle strength rivets ZEBRA® All purpose rivet with large snap head
sleeve: aluminium blankmandrel: steel blue zinc plated 0915 048...sleeve: aluminium blankmandrel: stainless steel A2 0915 148...sleeve: aluminium black eloxadizedmandrel: steel blue zinc plated 0915 9...
High strength rivetsZEBRA®
Rivet with mushroom head
sleeve: steel blue zinc plated mandrel: steel blue zinc plated 0913 2...sleeve: stainless steel A2mandrel: stainless steel A2 0913...
High strength rivetsZEBRA® rivet with mushroom head
sleeve: steel blue zinc plated mandrel: steel blue zinc plated 0913 9...sleeve: aluminium blankmandrel: aluminium blank 0913 8...
High strength rivetsMonobolt high strength rivet with mushroom head
sleeve: steel blue zinc plated mandrel: steel blue zinc plated 0921 65...sleeve: aluminium blankmandrel: aluminium blank 09210...sleeve: stainless steel A2mandrel: stainless steel A2 0921...
Special rivetsClosed-end blind rivet with dome headsleeve: aluminium blankmandrel: steel blank 0937 0...sleeve: aluminium blankmandrel: stainless steel A2 0937 1...sleeve: coppermandrel: steel blank 0940 0...sleeve: coppermandrel: stainless steel A2 0940 1...sleeve: stainless steel A2mandrel: stainless steel A2 0937 11...
Special rivetsClosed-end blind rivet with countersunk head 120°
sleeve: aluminium blank mandrel: steel blank 0937 2...
Special rivetsGroovedpop rivet, mushroom head
sleeve: aluminium blank mandrel: steel blue zinc plated 0937 9...
Special rivetsZEBRA® all purpose rivet with mushroom head
sleeve: aluminium blank mandrel: aluminium blank 0914 0...
Special rivetsSoft-claw rivet
sleeve: aluminium blankmandrel: steel blue zinc plated 0937 00...
Special rivetsZEBRA® pias self drilling rivet
sleeve: aluminium blank mandrel: steel blue zinc plated 0915 6...
Rivet nutsZEBRA® rivet nuts with smallcountersunk head
stainless steel A2 0942 1...Zebrasteel blue zinc plated 0917...
Rivet nutsZEBRA® rivet nuts with knurled shaft
steel blue zinc plated 0948 20 0/22 0...aluminium blank 0948 20/22...stainless steel A2 0942 10/20...Zebrasteel blue zinc plated 0917 2...
Rivet nutsZEBRA® rivet nutswith countersunk head and knurled shaft
steel blue zinc plated 0948 32 0...aluminium blank 0948 32...Inox A2 0942 10 0...
Rivet nutsZEBRA® rivet nuts with small and knurled shaft
steel blue zinc plated 0917 7…
Rivet nuts with small countersunk head
steel blue zinc plated 0948 7…
ASSY® 3
Pan head ASSY chipboard screws, half and full threaded with recess AW
full threadsteel blue zinc plated 0153 0...A2 0180 4...half threadsteel blue zinc plated 0153 1...A2 0180 5...
ASSY®3
Back panel screws large head, recess AW
steel blue zinc plated 0167 1…
ASSY®3
ASSY Screws with small countersunk head and recess AW
steel blue zinc plated 0168 33...steel brass-plated 0168 13...
ASSY® 3 Kombi
ASSY screws with hexagon head and recess AW
steel blue zinc plated 0184 20…
ASSY® 3
ASSY screws with large flanged head and recess AW
steel yellow zinc plated 0184 8...
ASSY® plus
ASSY screws, countersunk head full threaded with recess AW
steel blue zinc plated 0165 013...steel yellow zinc plated 0165 023...
ASSY® plus
ASSY screws, countersunk withcutter head and recess AW
half threadsteel blue zinc plated 0165 1...steel yellow zinc plated 0165 2...A2 0166 1...drilled headsteel blue zinc plated 0165 945...
ASSY® plus
ASSY screws, small countersunk withcutter head and recess AW
full thread steel yellow zinc plated 0165 06...
ASSY® plus
ASSY screws, raised countersunk withcutter head and recess AW
half thread steel yellow zinc plated 0165 813...steel brass-plated 0165 823...steel black-oxide 0165 833...steel whitely varnished 0165 843...steel nickel-plated 0165 853...A2 0166 10...
ASSY® 3
ASSY screws with countersunk head and recess AWfull thread steel blue zinc plated 0170 0...steel yellow zinc plated 0170 2...A2 0180 0...half threadsteel blue zinc plated 0170 1...steel yellow zinc plated 0170 3...A2 0180 1...
ASSY® 3
ASSY screws with raised countersunk head
full threadsteel blue zinc plated 0154 0...steel yellow zinc plated 0154 2...steel nickel-plated 0154 3...steel brass-plated 0154 4...A2 0180 2...half threadA2 0180 3...
D-/F Anchorwith zero potential and recess AW
steel blue zinc plated 0233 1...
AMO III-screws 7,5 mm (Type 1)
Ø 12 mm with countersunk cutter headand recess AW
Type 1 steel blue zinc plated 0234 730... steel yellow zinc plated 0234 13...
DIN 7967
Self locking counter nuts
steel blue zinc plated 0316...steel yellow zinc plated 0316 0...A2 0305...A4 0308...
ECOFAST ASSY® 3
Ecofast ASSY with cutter head and recess AWfull thread steel blue zinc plated 0170 0...steel yellow zinc plated 0170 2...A2 0180 0...half threadsteel blue zinc plated 0170 1...steel yellow zinc plated 0170 3...A2 0180 1...Drilled headsteel blue zinc plated 0162 2...HBsteel yellow zinc plated 0170 6...
W-0401
Self locking ring
self locking ringssteel blank (Type VSK) 0401 701...steel mechanical plated(Type VSK) 0401 721...steel Geomet® (Type VSK) 0401 771...steel blank (Type VSKZ) 0401 703...steel blue zinc plated(Type VSKZ) 0401 713...steel mechanical plated(Type VSKZ) 0401 723...steel Geomet® (Type VSKZ) 0401 772...A2 (Type VSKD) 0404 700...
DIN 462
Internal tab washers
steel blank 0437 000...steel black-oxide 0437 1...steel yellow zinc plated 0437 00...A2 0409 918...A4 0412 02...
DIN / ISO-STANDARD PARTS ANDAUTOMOTIVE STANDARDS
similar DIN 7976similar ISO 1479
Hexagon head tapping screws with washer
steel blue zinc plated(Type C) 0129 08...
b&m-PORTStep by step to your adequate connecting part
WORLDWIDE
The objective of baier & michels online database b&m-PORT is to link relevant processes of a successful C-Part Management as well as cost-optimization and sustainability.
SIMPLICITY
b&m-PORT supports you right from the beginning and leads you step by step through the vast variety of fasteners to your ideal solution. Thereby, a customized product portfolio is created, which can be used to meet different requirements quick and flexible.
EFFECTIVENESS
A database for fasteners helps optimizing the work of R&D departments for parts in the OEM sector as well as DIN & standardized parts. Existing parts are filtered and sorted, resulting in transparency of the information, which helps to make a quick decision.
CLARITY
Globalization causes a trend towards standardization, which also influences the fastener technology. OEM standards were developed in consideration of a recent worldwide market study.
The b&m-PORT avoids creating duplicates by using the classification of the parts. Thereby, redundant processes can be prevented and costs decreased. R&D departments receive all important information, customized to your requirements, by the touch of a button. If you have any questions, feel free to contact your key account manager.
ACCESSIBILITY
b&m-PORT provides an overview of the entire b&m product range, your customized product portfolio and if applicable more cost-efficient alternatives. Worldwide OEM standards and innovations, DIN and ISO parts are available at any time from any location.
Furthermore, b&m-PORT integrates important information of your fastener, such as drawings, 3D-models and recommendations for assembling.
© by baier & michels GmbH & Co. KGPrinted in Germany I All rights reserved I All information and data are provided without guarantee
baier & michels GmbH & Co. KG
Carl-Schneider-Straße 164372 Ober-RamstadtTel.: + 49 (0) 61 54 69 60 - 0Fax: + 49 (0) 61 54 69 60 - 500info@baier-michels.comwww.baier-michels.com
Würth baier & michels Automotive Fastener Co., Ltd
No. 1658 West Ba Zi Qiao RoadHuan Cheng Xi Lu / Fengxian District Shanghai 201400 / P.R. ChinaTel.: + 86 21 67 15 60 28Fax: + 86 21 67 15 60 68china@baier-michels.comwww.baier-michels.com
baier & michels S.r.l.
Viale Regione Veneto, 1735127 Padova / ItalyTel.: + 39 04 98 53 66 00Fax: + 39 04 98 53 66 96info@baier-michels.itwww.baier-michels.it
baier & michels USA Inc.
1629 Poplar Drive Ext.Greer, SC 29651 USATel.: + 1 864 968 1999Fax: + 1 864 968 1234usa@baier-michels.comwww.baier-michels.com
baier & michels France
290 J, Avenue Napoléon Bonaparte92500 Rueil-MalmaisonTel.: + 33 (0) 141 42 57 85Fax: + 33 (0) 1 41 42 57 85france@baier-michels.comwww.baier-michels.com
baier & michels USA Inc.
2800 Superior CourtAuburn Hills, MI 48326 USATel.: + 1 864 354 8286usa@baier-michels.comwww.baier-michels.com
YOUR BENEFITS
• Extensive download area Drawings and 3D-data Individual assembly-recommendations Individual screw-in-diagram Sampling documents • Wide application range• Available 24/7, worldwide • Personal contact person• IP secured access• Sample parts on short notice available• Time and cost savings due to already approved parts• Shorter delivery times and cost savings, due to increasing quantities of already existing parts • Cost savings for the tooling• Prevention of duplicates
PLUS The portal can be integrated into already existing customer systems. Therefore, a faster and easier access is guaranteed.
LoginWith the provided account information from your online-portal-administrator you can login worldwide. b&m-PORT is available in two languages (German and English).
We protect your information! We protect your information and avoid violations from outsiders. Please talk to us!
Please use the “visual navigation” as an illustration of the classification.Define your part step by step.
This means for screws e.g.:• What kind of fastener is it?• What kind of thread is it?• What head form should be chosen?• How should the drive be determined?
In the end you receive a result of your chosen features.
By using “article search” you can specifically search for your part.
Define your C-Part with all associate features or get inspired by some alternatives. Not every feature has to be defined.
You already have a part number? No Problem! Enter your part number and you will find the part you are looking for.
Choose your part and get exact information, such as drawings, 3D-data, assembly recommendations, etc. You have the Choice!
ONLINE-PORTAL - Login at our website www.baier-michels.com
OVERVIEW
!
✓
i