FEATURE PRODUCTASTM A354 Grade 8 specifications • Zinc plated for corrosion resistance TIFALLOY®...
Transcript of FEATURE PRODUCTASTM A354 Grade 8 specifications • Zinc plated for corrosion resistance TIFALLOY®...
FEATURE PRODUCTOF THE MONTH F E B 2 0 2 0
2 Good through February 29, 2020
TIF-LOCK RETAINERSPREVENTS NUTS FROM LOOSENING FREE FROM THE BOLT UNDER VIBRATION• Fast and easy to install• Will not come loose under vibration• Eliminates the need for double
nuts, locking nuts, jam nuts, time consuming safety wire-locks, cotter pins, and messy thread lockers
• No special tools required, works with standard 12-point sockets
• Made from corrosion resistant 304 Stainless Steel for harsh environments
• Only requires three threads beyond the nut to work because it occupies three coils when it is threaded onto a bolt and expands
• Surpasses the testing requirements of NAS3350 (National Aerospace Specification for impact type vibration test)
• No special torque requirements• If there is a gap between the retainer
and the nut, simply tighten until it is flush with the nut
• Can be manually threaded onto existing applications.
• Reusable as long as the Tif-Lock Retainer "returns" to a hex shape after disassembly and retainers are not deformed
Once positioned against the nut, Tif-Lock Retainers engage the bolt along the pitch diameter including spring forces axially and radially. These forces hold Tif-Lock Retainers in place, which prevents bolts and nuts from loosening under vibration.
SUPERIOR FORCE
NEW!
Good through February 29, 2020 3
Simply load Tif-Lock Retainer into a 12-Point socket.
Tighten to application requirements.
Load the standard nut on top of the Tif-Lock Retainer.
If there is a gap between Tif-Lock Retainer and the nut, simply tighten the Tif-Lock Retainer until it is flush with the nut.
Part No. Size Socket Size
22230 1/4 – 20 7/16
22231 5/16 – 18 1/2
22232 3/8 – 16 9/16
22233 7/16 – 14 5/8
22234 1/2 – 13 3/4
22236 5/8 – 11 15/16
22237 3/4 – 10 1 1/8
22238 7/8 – 9 1 5/16
22239 1 - 8 1 1/2
Part No. Pieces
85807 125
Part No. Pieces
85809 145
Part No. Size Socket Size
22240 M4 – 0.7 M7
22241 M5 – 0.8 M8
22242 M6 – 1.0 M10
22243 M8 – 1.25 M13
22244 M10 – 1.5 M16
22245 M12 – 1.75 M18
22247 M16 – 2.0 M24
22248 M20 – 2.5 M30
22250 M24 - 3 M36
INSTALLATION IS EASY!
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
State of California Consumers:
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
State of California Consumers:
1/4 TO 3/4 & M4 TO M16 TIF-LOCK RETAINER ASSORTMENT
1/4 TO 1" & M4-M24 TIF-LOCK RETAINER ASSORTMENT
4 Good through February 29, 2020
TIFALLOY® FASTENING SYSTEMTHE FINEST QUALITY TIFALLOY® CAP SCREWS, HEX NUTS, LOCK WASHERS, AND FLAT WASHERS PROUDLY MADE IN AMERICA!
TIFALLOY® FASTENING SYSTEM PROVIDES YOU WITH:• Increased strength and safety over stan dard
fas ten ers• Unequaled performance and reliability• Unique product design for ease of in stal la tion• 100% traceable American made fasteners• Material Test Reports available upon request
• The most reliable matched fastener system available
• Fasteners designed for the most critical and demanding applications
• Superior fatigue resistance and lower maintenance costs
• Reduced equipment breakdowns and loss of production time
• Reduced compatibility problems while increasing operational safety
• Availability of technical assistance• Educational material for proper torque
application• Latest innovative and up-to-date manufacturing
process with built-in statistical quality control• Fastener head-marking identification assures full
product traceability• Custom assortment selection• Organized fastener inventory control systems
TIFALLOY® FASTENING SYSTEMBENEFITS YOU WITH:
TIFCO OFFERS YOU THESE UNIQUE ADVANTAGES:
TIFCO'S UNIQUE TIFALLOY® CAP SCREWS CONTAIN:
Maximum P.S.I. 200,000Tensile strength - minimum 180,000 P.S.I.
Proof load 150,000+ P.S.I.Tifalloy Capscrews have 20% higher head than ordinary capscrews
QUALITY FEATURES AND BENEFITS:Rockwell Hardness C38 min.- C42 max.
TIFALLOY CAPSCREW HEAD
STANDARD CAPSCREW HEAD
• Chrome, Molybdenum, Manganese and Nickel.• These 4 alloys combine to produce the
strongest and hardest cap screws which exceed all Grade 8 requirements
Good through February 29, 2020 5
TIFALLOY® FASTENING SYSTEMTHE FINEST QUALITY TIFALLOY® CAP SCREWS, HEX NUTS, LOCK WASHERS, AND FLAT WASHERS PROUDLY MADE IN AMERICA!
Flats are easy to grip and corners resist rounding
20% higher head than standard cap screws makes wrenching easier
Manufactured in America with American materials
Head Marking includes "TIFCO" and Grade Markings for ease of identification
15° Top Chamfer higher corners for reduced socket wear
Trailing thread does not enter extrusion angle for increased stress resistance
Class 2 UNR threads are cold rolled and precision formed for increased clamping strength, better fit and reduced risk of failure
Chamfered points for easy starting and assembly
Smooth fillet radius design to increase fatigue strength and reduce stress concentration where the head and shank meet
Concentric shanks for easy, accurate as sem bly
100% traceable - each lot is lab o ra to ry tested to assure consistent quality material test reports available
Excellent elongation properties stretches a min. of 12% in a standard elongation test per J429
Smooth washer face bearing surface permits complete 360° load distribution while maintaining consistent clamping force
• Made of Super Hi-tensile Quad-Alloy Steel• Minimum 180,000 P.S.I. tensile strength• Greater hardness, strength, heat and corrosion resistance,
and overall durability than standard Grade 8 cap screws• Controlled grain flow with washer face• Double heat treated with 20% higher head• Cold rolled, Class 2A Threads - machine pointed• C38-42 Rockwell Hardness • Meets or exceeds SAE J429 and
ASTM A354 Grade 8 specifications• Zinc plated for corrosion resistance
TIFALLOY® SUPER 8 FASTENING SYSTEM
• Zinc plated for corrosion resistance• Minimum proof load stress to 180,000 P.S.I.• 20% higher for better load distribution and
greater wrenching surface• C32-38 Rockwell Hardness • Designed for use with Tifalloy® cap screws• Washer faced, countersunk, and chamfered• Precise, burr-free class 2A threads
TIFALLOY® THICK NUTS• Yellow zinc chromate finish for excellent
corrosion resistance• Exceeds ASTM F436, Rockwell Hardness C40-48• Heat treated alloy steel, up to 25% thicker than
standard washers• Features tight SAE dimension I.D. with large
pattern USS dimension O.D.
TIFALLOY® WASHERS
MADE IN
U.S.A.
6 Good through February 29, 2020
PURCHASE ONE OF THESE TIFALLOY® BIN ASSORTMENTS
AND RECEIVE A FREE POWERMAXX® QUASAR™
HIGH-POWERED FLASHLIGHT 1400 LUMENS!
$79 VALUE!Part No. 7182
Part No. Description Pieces
89003 1/4 - 3/4" 2,875
89005 1/4 - 1" 2,636
Part No. Description Pieces
89600 1/4 - 1/2" 1,995
Part No. Description Pieces
89021 1/4 - 3/4" 2,420
89041 1/4 - 1" 2,636
80 COMPARTMENT BIN ASSORTMENTS(2 X 40 COMPARTMENT BINS WITH BIN BASE)
40 COMPARTMENT BIN ASSORTMENT(BIN BASE NOT INCLUDED)
72 COMPARTMENT BIN ASSORTMENTS (WITH BIN BASE)
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
State of California Consumers:
Each Bin Assortment shown comes with Tifalloy Capscrews, Lock Washers, Flat Washers and Thick Nuts
89021
Good through February 29, 2020 7
PURCHASE ONE OF THESE TIFALLOY® TRAY ASSORTMENTS
AND RECEIVE A FREE POWERMAXX® POCKET FLASHLIGHT
PURCHASE THIS TIFALLOY® 2-TRAY RACK ASSORTMENT
AND RECEIVE A FREE POWERMAXX® SCEPTOR FLASHLIGHT
Part No. 6313
Part No. 7184
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
State of California Consumers:
Part No. Description Pieces
85376
1/4 - 3/8"Capscrews, Lock
Washers, Flat Washers and Nuts
750
851541/4 - 1/2"
Capscrews only 340
85382
1/4 - 1/2"with Nuts, Lock Nuts and Flat
Washers
450
Part No. Description Pieces
87190
1/4 - 1/2"Capscrews, Thick
Nuts, Lock Washers and Flat Washers
790
TIFALLOY® TRAY ASSORTMENTS
TIFALLOY® 2-TRAY RACK ASSORTMENT(CONTAINS 85154 AND 85382 TIFALLOY® TRAYS)
85154
ONLY 5.5" LONG
500 LUMEN
5 HOUR RUN TIME
RECHARGEABLE
87190
BF# 19305201/31/2020 v1Good through February 29, 20208
Main Office: Houston, Texas • Branch Office: Reno, Nevada Phone: 800.868.4326 • Fax: 800.535.4619 • www.tifco.com • Shop online at: tifcoonline.com
THE RIGHT PART, IN THE RIGHT PLACE, AT THE RIGHT TIME
* Fully threaded sizes
Length Part No.
1/2 65000*
3/4 65004*
1" 65008*
1 1/4 65010
1 1/2 65012
1 3/4 65014
2" 65016
2 1/4 65018
2 1/2 65020
3" 65024
3 1/2 65028
4" 65032
Tifalloy® Thick Nut 64342
Flat Washer 54771
1/4-20 UNCLength Part No.
1/2 65060*
3/4 65064*
1" 65068*
1 1/4 65070*
1 1/2 65072
2" 65076
2 1/4 65078
2 1/2 65080
3" 65084
3 1/2 65088
4" 65092
Tifalloy® Thick Nut 64344
Flat Washer 54772
5/16-18 UNCLength Part No.
3/4 65124*
1" 65128*
1 1/4 65130*
1 1/2 65132
1 3/4 65134
2" 65136
2 1/4 65138
2 1/2 65140
3" 65144
3 1/2 65148
4" 65152
4 1/2 65154
5" 65156
6" 65160
Tifalloy® Thick Nut 64346
Flat Washer 54773
3/8-16 UNCLength Part No.
1" 65188*
1 1/4 65190*
1 1/2 65192*
1 3/4 65194
2" 65196
2 1/2 65200
3" 65204
3 1/2 65208
4" 65212
5" 65216
Tifalloy® Thick Nut 64348
Flat Washer 54774
7/16-14 UNCLength Part No.
3/4 65244
1" 65248*
1 1/4 65250*
1 1/2 65252*
1 3/4 65254
2" 65256
2 1/4 65258
2 1/2 65260
3" 65264
3 1/2 65268
4" 65272
4 1/2 65274
5" 65276
5 1/2 65278
6" 65280
Tifalloy® Thick Nut 64350
Flat Washer 54775
1/2-13 UNC
Length Part No.
1 1/2 65312*
2" 65316
2 1/2 65320
3" 65324
Tifalloy® Nut 64052
Flat Washer 54776
9/16-12 UNCLength Part No.
1 1/2 65372*
1 3/4 65374*
2" 65376*
2 1/4 65378
2 1/2 65380
3" 65384
3 1/2 65388
4" 65392
4 1/2 65394
5" 65396
5 1/2 65398
6" 65400
6 1/2 65402
7" 65404
7 1/2 65406
8" 65408
Tifalloy® Thick Nut 64354
Flat Washer 54777
5/8-11 UNCLength Part No.
1 1/2 65432*
1 3/4 65434*
2" 65436*
2 1/4 65438
2 1/2 65440*
3" 65444
3 1/2 65448
4" 65452
4 1/2 65454
5" 65456
6" 65460
Tifalloy® Thick Nut 64356
Flat Washer 54778
3/4-10 UNCLength Part No.
2" 65496*
2 1/2 65500*
3" 65504
3 1/2 65508
4" 65512
4 1/2 65514
5" 65516
6" 65520
Tifalloy® Thick Nut 64058
Flat Washer 54779
7/8-9 UNCLength Part No.
2" 65556*
2 1/2 65560*
3" 65564*
3 1/2 65568
4" 65572
4 1/2 65574
5" 65576
6" 65580
Tifalloy® Thick Nut 64060
Flat Washer 54780
1"-8 UNC
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
State of California Consumers:
TIFALLOY® FASTENING SYSTEM SIZE RANGE