Ansys Fluent basics

ANSYS-FLUENT Tutorial

Dr. Mohammad O. Hamdan

United Arab Emirates University

Spring, 2010

1) Drag and drop Mesh icon

2) Double click Geometry

Select any line from the

sketch and then hit Apply

Put thickness 0.01 m

ApplyApply

In_flow

out_flow

Drag and drop on mesh

0.10.1

Fluid then OK/OK/

Yes… change

Change V_in=1 m/s

Yes… change, then P=0, OKYes… change, then P=0, OK

Change to 100

X=0 and Y=1

United Arab Emirates University

Good Luck in you CFD career

Documents