TRUST ONE NAME AMERICAN FITTINGS

Our Bene�ts to You

SPEC-grade Industrial Electrical Fittings

AMERICAN FITTINGSCorporation

MIL-Spec SEISMIC APPROVED Fitttings

™

Made in the USA Since 1946

Sold Exclusively Through Authorized Electrical Distributors

Besides UL Listings, AMFICO's solid steel EMT and Rigid conduit �ttings are tested and certi�ed to MIL-STD-810 Sinusoid Vibration Requirements. Our electrical �ttings are the superior choice for areas throughout the country where seismic, storm (tornado & hurricane), and critical exposure to the elements are a concern.Fact: All electrical construction in these harsh areas has unique requirements. Do you know the most critical areas of all conduit runs are the �ttings? Fittings receive and absorb the major stress from forces and movements in conduit runs and equipment. Fact: Porosity & creepage are genetic to ALL zinc die cast �ttings. Under normal daily stresses, die cast porosity creeps to form inherent elongation - �ssures that may crack under movement or load. Certainly, a major concern in any harsh environment.Fact: Today’s longer conduit runs are exposed to an even greater risk & subsequent failure when using any zinc die-cast or undocumented o�shore products that are “brand camou�aged”.

Learn more about the hidden dangers in die-cast products; visit amftgs.com and see the di�erences in US vs. “Them”

Fully Machined Solid Steel Construction Manufactured in the USA The Perfect Connection for

The “HARSH” Facts

Quality has one name, AMERICAN amftgs.comTMLC11.14 © 2014 American Fittings Corp.

FULL-LINE Manufacturer, Enabling One Source Specs & PurchaseSAVE On Installation Time & CostsRELIABILITY Since 1946 Consistency, Durability, & Strength VALUE Eliminate Scrapping Cracked & Stripped FittingsSUPERIOR On Time Delivery & Personalized ServicesALWAYS Meet Job Speci�cations, with Our Fittings - GuaranteedNEVER Camou�aged O�-Shore Parts Sold in ‘Brand Name’ Boxes

NO SURPRISES, You Will Always Get What You Ordered. . .When You Open Our Box You Will ALWAYS Find an AMERICAN MadeFitting. Full Traceability, & Material Certs are Always Available. All Products Carry a100% Product Performance Guarantee

AgricultureAlternative Energy

Federal & State ProjectsFood Processing & Production

Industrial ApplicationsMilitary Bases

OEM EquipmentOil & Gas Projects

Paper & PulpTransportation

Waste Water Treatment

EMT & Rigid Conduit FittingsLiquid Tight FittingsCord & Cable ConnectorsFMC ConnectorsGreen�eld ConnectorsGround BushingsAMFICO HubsReducing BushingsChase NipplesMTO SpecialsAluminum & Stainless Steel

®

AMERICAN FITTINGS Corporation17-10 Willow Street Fair Lawn, NJ 07410 t: 800.221.5268 | f: 201.664.1175

Online: amftgs.com e: info@amftgs.comProduct Cut Sheets Are Available Online

EMT & Rigid Conduit Fittings

Solid Steel Construction, with Full Zinc Plating & Fully Machined Threads, Strong Enough to Hold Long Conduit Runs In Place During Installation

Available 1/2” - 4“ Trade SizesSet Screw or Compression, Rain Tight & Concrete Tight

Couplings, Connectors, Reducing Bushings, Ground Bushings & Myers HubsAdapters: Convert LT to Rigid Conduit & Transition EMT to Rigid

Seismic Rated & Tested

SPECTRUMCord GRIP Connectors

Available 1/2” - 2” Trade Sizes with Each Color Coded by Cable RangeZinc Plated Steel or Aluminum

Straight, 90˚, 45˚, & Wire Mesh Strain Reliefs 3 Con�gurations Available

SPECTRUM, Standard Industrial & AMFICO Direct Appleton Size Cross

Why Aren’t Your Cables Wearing the Best?

Available 1/2” - 5” Trade Sizes Zinc Plated Steel or AluminumStraight, 90˚, 45˚, & Wire Mesh

Solid Steel ConstructionStandard Industrial & Heavy Duty Industrial Grades

Uniquely Designed Ferrule & Sealing Ring

Liquid-TIGHT FittingsDesigned to Fit Tight & Right

Installs on Green�eld in Seconds WITHOUT a ToolTM

No Screws to Pinch or Pierce ConduitMaintains Full Integrity of the Conduit OD & ID

Exceeds UL Pullout Requirements by 300%Fully-Machined Solid Steel or Aircraft Grade Aluminum

Provides a Safe Burr-less Wire Pull

NO Screw or Crimp Required to Install Simply, Turn It On Your FMC

The NEXT GENERATION of FMC Connectors

Patent Pending

Our Superior Value Will Outperform & Outclass ALL Other Fittings !

Featuring our Unique Solid SteelEZ-TORQUE Compression Nuts

Save Time & CostsOn Every Installation

All Fittings Sold with a 100% Product Guarantee

NEVER Crack or Deform Another Fitting During Installation

TM

®

AMERICAN

FITTINGS

SPEC-�ex connectors

Product Design & Material Integrity Provide the Ideal Connection forAll Industrial Electrical Runs, As Well As Earthquake, Hurricane & Tornado Zones.

electrical �ttings

Straight, 90º, or 45º Connector Connects Green�eld to Enclosures, Boxes, orTransition Green�eld Runs to Rigid Pipe, Cord, EMT or LT with Our Adapters

Available 1/2” - 2” Trade Sizes

An Industrial Specification Grade Connector System for Greenfield