American Fittings Product Line Card...
Transcript of American Fittings Product Line Card...
-
TRUST ONE NAME AMERICAN FITTINGS
Our Bene�ts to You
SPEC-grade Industrial Electrical Fittings
AMERICAN FITTINGSCorporation
MIL-Spec SEISMIC APPROVED Fitttings
™
Made in the USA Since 1946
Sold Exclusively Through Authorized Electrical Distributors
Besides UL Listings, AMFICO's solid steel EMT and Rigid conduit �ttings are tested and certi�ed to MIL-STD-810 Sinusoid Vibration Requirements. Our electrical �ttings are the superior choice for areas throughout the country where seismic, storm (tornado & hurricane), and critical exposure to the elements are a concern.Fact: All electrical construction in these harsh areas has unique requirements. Do you know the most critical areas of all conduit runs are the �ttings? Fittings receive and absorb the major stress from forces and movements in conduit runs and equipment. Fact: Porosity & creepage are genetic to ALL zinc die cast �ttings. Under normal daily stresses, die cast porosity creeps to form inherent elongation - �ssures that may crack under movement or load. Certainly, a major concern in any harsh environment.Fact: Today’s longer conduit runs are exposed to an even greater risk & subsequent failure when using any zinc die-cast or undocumented o�shore products that are “brand camou�aged”.
Learn more about the hidden dangers in die-cast products; visit amftgs.com and see the di�erences in US vs. “Them”
Fully Machined Solid Steel Construction Manufactured in the USA The Perfect Connection for
The “HARSH” Facts
Quality has one name, AMERICAN amftgs.comTMLC11.14 © 2014 American Fittings Corp.
FULL-LINE Manufacturer, Enabling One Source Specs & PurchaseSAVE On Installation Time & CostsRELIABILITY Since 1946 Consistency, Durability, & Strength VALUE Eliminate Scrapping Cracked & Stripped FittingsSUPERIOR On Time Delivery & Personalized ServicesALWAYS Meet Job Speci�cations, with Our Fittings - GuaranteedNEVER Camou�aged O�-Shore Parts Sold in ‘Brand Name’ Boxes
NO SURPRISES, You Will Always Get What You Ordered. . .When You Open Our Box You Will ALWAYS Find an AMERICAN MadeFitting. Full Traceability, & Material Certs are Always Available. All Products Carry a100% Product Performance Guarantee
AgricultureAlternative Energy
Federal & State ProjectsFood Processing & Production
Industrial ApplicationsMilitary Bases
OEM EquipmentOil & Gas Projects
Paper & PulpTransportation
Waste Water Treatment
EMT & Rigid Conduit FittingsLiquid Tight FittingsCord & Cable ConnectorsFMC ConnectorsGreen�eld ConnectorsGround BushingsAMFICO HubsReducing BushingsChase NipplesMTO SpecialsAluminum & Stainless Steel
®
AMERICAN FITTINGS Corporation17-10 Willow Street Fair Lawn, NJ 07410 t: 800.221.5268 | f: 201.664.1175
Online: amftgs.com e: [email protected] Cut Sheets Are Available Online
-
EMT & Rigid Conduit Fittings
Solid Steel Construction, with Full Zinc Plating & Fully Machined Threads, Strong Enough to Hold Long Conduit Runs In Place During Installation
Available 1/2” - 4“ Trade SizesSet Screw or Compression, Rain Tight & Concrete Tight
Couplings, Connectors, Reducing Bushings, Ground Bushings & Myers HubsAdapters: Convert LT to Rigid Conduit & Transition EMT to Rigid
Seismic Rated & Tested
SPECTRUMCord GRIP Connectors
Available 1/2” - 2” Trade Sizes with Each Color Coded by Cable RangeZinc Plated Steel or Aluminum
Straight, 90˚, 45˚, & Wire Mesh Strain Reliefs 3 Con�gurations Available
SPECTRUM, Standard Industrial & AMFICO Direct Appleton Size Cross
Why Aren’t Your Cables Wearing the Best?
Available 1/2” - 5” Trade Sizes Zinc Plated Steel or AluminumStraight, 90˚, 45˚, & Wire Mesh
Solid Steel ConstructionStandard Industrial & Heavy Duty Industrial Grades
Uniquely Designed Ferrule & Sealing Ring
Liquid-TIGHT FittingsDesigned to Fit Tight & Right
Installs on Green�eld in Seconds WITHOUT a ToolTM
No Screws to Pinch or Pierce ConduitMaintains Full Integrity of the Conduit OD & ID
Exceeds UL Pullout Requirements by 300%Fully-Machined Solid Steel or Aircraft Grade Aluminum
Provides a Safe Burr-less Wire Pull
NO Screw or Crimp Required to Install Simply, Turn It On Your FMC
The NEXT GENERATION of FMC Connectors
Patent Pending
Our Superior Value Will Outperform & Outclass ALL Other Fittings !
Featuring our Unique Solid SteelEZ-TORQUE Compression Nuts
Save Time & CostsOn Every Installation
All Fittings Sold with a 100% Product Guarantee
NEVER Crack or Deform Another Fitting During Installation
TM
®
AMERICAN
FITTINGS
SPEC-�ex connectors
Product Design & Material Integrity Provide the Ideal Connection forAll Industrial Electrical Runs, As Well As Earthquake, Hurricane & Tornado Zones.
electrical �ttings
Straight, 90º, or 45º Connector Connects Green�eld to Enclosures, Boxes, orTransition Green�eld Runs to Rigid Pipe, Cord, EMT or LT with Our Adapters
Available 1/2” - 2” Trade Sizes
An Industrial Specification Grade Connector System for Greenfield