Post on 10-Apr-2018
Roma, Italy
TL seriesProduct Leaflet
MICROWAVE RADIO
A hybrid (IP & TDM) high capacity microwave radio system
designed for trunk and long haul links. With up to 16 RF channels
and N+0/N+1 configurations, the TL is capable of providing
various solutions for high capacity wireless transport
infrastructures.
Suitable for multiple applications, from wireless backbone, spur
and fiber back-up, and capable of reaching critical locations
providing connectivity over water and terrain that other
transport media would fail to reach.
TL series
MEMBER OF:
TL.L.02.14 Data subject to change without notice • All rights reserved © SIAE MICROELETTRONICA S.p.A. www.siaemic.com
TL is available in all frequency bands from 4 to 13 Ghz with up to 16 STM-1 or 4 Gbits capacity, in N+1 or N+0 & M+1 or
M+0 configurations. In addition, for IP applications a L2 switch is embedded in the equipment.
MAIN FEATURES
TRMD Main signal transmission unit A high integration level to package in the TRMD; the Transmitter (TX), Receiver (RX), Mo-demodulator and base band
functions.
The one rack chassis can host up to 16 bidirectional RF carriers.
Minimization of frequency dependent spare parts has been achieved
through the use of wide-band units.
Easy operation and maintenance: no adjustment or provisional settings are required.
TL compact
TL compact available in all frequency bands from 4 to 13 Ghz (IT-R, FCC, NTIA) is the ideal solution
for a wide range of applications in access networks and backbone areas. The TL compact solution
provides up-to 4 RF carriers per cabinet (3+1 / 4+0), optimizing the costs.
With an IP55 weather hardened cabinet, it is possible to address a full outdoor installation, close to
the antenna reducing the waveguide losses and potentially removing the dehydrator that results in
a better TCO.
• N+1 or N+0 mixed configuration
ACCP/ACAP/CCDP with SD (space
diversity) & TSD (transmit space
diversity with up to 16 channels)
support in a single rack
• Full set of countermeasures
against fading in order to
maximize system performance
• 2.048 Mbit/s wayside traffic and 64
kbps digital service channels
• 1.554 Mbit/s wayside traffic
• Fixed or Adaptive Code Modulation
Technique 4/16/32/64/128/256/512
QAM
• STM-1 and Gigabit Ethernet (GE)
electrical or optical interfaces are
available with any mix of
combinations
• Easy on-site test and management
without measuring instruments:
automatic IF-IF response
adjustment
automatic SD DADE adjustment
automatic baseband DADE
adjusment
LAYER 2 SWITCH FUNCTIONALITIES
• Native IP radio
• VLAN Management
• Spanning tree
(STP/RSTP)
• Ethernet QoS (IEEE 802. /ToS/
DSCP)
• Link aggregation (L1)
• Traffic Shaping
TYPICAL APPLICATIONS
• 2G/3G/LTE Cellular Network infrastructure
• backup transmission medium to fiber
optic links
• High capacity IP Radio Rings
• Wireless backbone for all regional and
national networks
MICROWAVE RADIO
Product Data Sheet
TL series
Frequency Range Full coverage of ITU/R channels from 4 to 13 GHz
Supported configurations
N+1 or N+0 & M+1 or M+0 combined ACCP/ACAP/CCDP with/without SD/TSD
(single/dual RF band, Point-to-Point and Dual/Double Terminal)
All configurations can be provided with or w/o XPIC
Modulation schemes TDM 64 QAM for 4, 6U, 11 GHz
128 QAM for 4U, 6L, 7L, 7U, 8L, 13 GHz
IP 4, 16, 32, 64, 128, 256, 512 QAM
Supported capacities TDM Up to 16 STM1
IP Up to 4 Gbps
Transmit Power at TRMD unit output (dBm)
(standard/ / high power ) 4-8 GHz 11 GHz 13 GHz
4 QAM +33 / +30 +30 +27
16 QAM +33 / +30 +30 +27
32 QAM +33 / +30 +30 +27
64 QAM +33 / +29 +30 +27
128 QAM +32 / +29 +29 +27
256 QAM
512 QAM
+31 / +28
+30 / +27
+28
+27
+26
+25
RF Tuning range (No. of TMRD to cover a complete half band) 1 2 2
Receiver sensitivity at ber 10-6 TRMD unit imput:
Rx Power (dBm) (typ) IP TDM
4 QAM -90 -
16 QAM -84 -
32 QAM -81 -
64 QAM -78 -75.5
128 QAM -74 -72
256 QAM
512 QAM
-70
-64
-
-
Frequency stability ± 10 ppm
ATPC 20 dB range
Tributary interfaces Electrical/Optical STM-1/OC-3 (S.11, L1.1)
Electrical/Optical Gbit Ethernet
Service Channels
2x2 Mbits wayside channel STM1
1X64 Kbits G.703 per STM1
Express and Omnibus Order WIre
Additional features (optional)
XPIC for frequency reuse
STM-1 Ethernet Occasional channel
TSD Transmit Space Diversity
Dual RF
Double Terminal
Extended housekeeping input and output
Mechanical Dimensions Housed in an ETSI rack (1800x600x345 mm) (70.9x23.6x13.6 in)
Housed in an ETSI rack (2200x600x345 mm) (86.6x23.6x13.6 in)
Power supply Redundant separated power feeding
Power consumption (per terminal) 1+1 conf. 200 W
3+1 conf. 400 W
7+1 conf. 800 W
Environmental performance In accordance with EN300 019