Post on 28-Sep-2015
description
172
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
Part Number
64-01-10
www.southco.com/64
11 (.42)
13 (.53)
43 (1.69)
28 (1.10)
0.9 (.036)
8 (.32)
1.6 (.065) Max.Door thickness
3.2.2(.125.010)
Total grip
24.5
39
9.50.8(.38.03)
R 1.5 (.06) max. +0.1 -0.3
+0.1 -0.3
(1.53.01)
(.96.01)
9 (.36)
M4 slotted hex head screw/lockwasherass'y (supplied)
Part NumberSee table
64 Push-to-Close LatchPull-to-open Paddle latch Miniature
Single hole installationConcealed mountingPlastic slide
Material and FinishStainless steel passivated and brushed finish and glass reinforced nylon, black
Performance DetailsMax. working load: 90 N (20 lbf)
Operating temperature range: -18C (0F) to 100C (210F)
Flammability rating: UL94-V0
Installation NotesMax. tightening torque on mounting screws: 0.9 Nm (8 inlbf)
173
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
Grip RangeSlide Style
AB
T (See
Notes)
Part Number Brushed Finish
Door Thickness Range
Min. Max. Min. Max. 3.7 (.144) Max.
3.9 - 7.3 (.154 - .288)
11.1 - 14.6 (.437 - .576)
18.6 - 22 (.734 - .868)
1.2 (.05) 2 (.08) 110.4 (.41)
12.7 (.50)
12.4 (.49)
1.6 (.063) 64-10-111-50 ~ ~ ~
2.8 (.11) 3.6 (.14) 2
11.9 (.47)
14.2 (.56)
14.2 (.56)
3.2 (.125) 64-10-113-50 64-10-133-50 ~ ~
6 (.23) 6.7 (.27) 3 6.4 (.250) 64-10-124-50 64-10-114-50 ~ ~
12.3 (.48) 13.1 (.52) 4 7.1 (.281) 64-10-125-50 64-10-135-50 64-10-115-50 64-10-115-50
18.6 (.73) 19.4 (.77) 5 7.1 (.281) 64-10-126-50 ~ 64-10-116-50 64-10-116-50
www.southco.com/64
56(2.20)
47(1.84)
42.5(1.67)
B
14(.56)
Cup
25(.97)
13 (.50)
Doorthicknessrange(see table)
Mounting nut
Stud, M4 Thread
BracketSlide (style 1 shown)
Griprange(see table)
1 (.04)
Cover
Paddle
47.50.2(1.88.01)
A
16 (.63) Min.
10.30.2 (.4101)
36.50.2(1.44.01)
Door
Frame
R 2 (.09) max.
Bracket
Stud
Mounting nut
Frame Door
Single hole installationConcealed mountingPlastic slide
Material and FinishStainless steel passivated and brushed or black powder coated and glass reinforced nylon, natural
Performance DetailsMax. working load:
Operating temperature range: -18C (0F) to 100C (210F)
Flammability rating: UL94-V0
Installation NotesDoor thickness must not exceed T dimension (see table) in area through which slide will operate.It may be necessary to reduce thickness of door in area indicated by grid.
Slide styles:
NotesFor an assembly with black powder coated finish change last digit from 0 to 5 - Example: 64-10-111-55
64 Push-to-Close LatchPull-to-open Paddle latch Small
Style 2
Style 3
Style 4
Style 5
Style Max. Static Load N (lbf)
1 130 (30)
2 110 (25)
3 90 (20)
4 70 (15)
5 55 (12)
174
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
Grip Range Part Number AB
Min. Max. Stainless Steel, Brushed Stainless Steel Black Powder coated Min. Max.
1.2 (.05) 2 (.08) 64-11-10 64-11-12 10.4 (.41) 12.7 (.50) 11.5 (.45)
2 (.08) 2.8 (.11) 64-11-20 64-11-22 11.2 (.44) 13.5 (.53) 11.9 (.47)
2.8 (.11) 3.6 (.14) 64-11-30 64-11-32 11.9 (.47) 14.2 (.56) 12 (.48)
www.southco.com/64
R 2 (.09) max.
47.50.2(1.88.01)
A
36.50.2(1.44.01)
FrameDoor
Bracket
Stud
Mounting nut
Door
Frame
56(2.20)
B Grip range(see table)
Stud, M4 Thread
25(.97)
13 (.50)
1 (.04)
47(1.84)
42.5(1.67) 14 (.56)
Cup
Slide
CoverBracket
Mounting nut
Paddle
Part NumberSee table
64 Push-to-Close LatchPull-to-open Paddle latch Small
Single hole installationConcealed mountingMetal slide
Material and FinishStainless steel passivated and brushed or black powder coated, steel, chrome plated
Performance Details Max. working load: 222 N (50 lbf)
175
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
64 - 2 L - 1 M
www.southco.com/64
8(.31)
84(3.31)
1.2 (.05)
M5 Thread
Gap important(See installation notes)
68.5(2.69)
19(.75)
36(1.39)
17.5(.69)
6.4 (.25) Max.
Doorthickness
7.9 (.31)
Frame
DoorLatch
Mounting bracketAdjusting nut
LockwasherMounting nut
Available with or without lock(see part number selection)
R 2.5 (.09) Max.
DoorFrame
Min. 8 (.31)Max. 11 (.44)
55.5(2.19.01)
+0.3- 0.1
71.5(2.81.01)
+0.1- 0.3
Gapimportant(see installation notes)
Edge of frame ormodified latchingsurface (notch,hole, bracket orshim)
11.1 (.44) Min
Adjusting nut
Mountingbracket
LockwasherMounting nut
SlideFrame
7.9 (.31)8. (.31) Min11 (.44) Max
14.3 (.56) Ref
Door
Part Number Selection
64 Push-to-Close LatchPull-to-open Paddle latch Medium
Single hole installationConcealed mountingMetal slide
Material and FinishStainless steel brushed, steel, zinc plated or steel, black powder coated or silver
Performance DetailsMax. working load: 570 N (125 lbf)
Installation NotesMeasure your door thickness and set adjusting nut so that GAP is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00).
AccessoriesFlat key, keyed alike H257 (2 keys per ring) Part number: 64-0-33578
M Material0 Stainless steel, brushed 1 Steel, black powder coated3 Steel, zinc plated5 Steel, powder coated silver
L Lock style1 Non-locking2 Key-locking keyed alike H257 (2 keys supplied)
176
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
64-10 - 30 L - M 0
www.southco.com/64
Gap important(See installation notes)
Frame
Door
Mounting bracket
Adjusting nutLockwasher
Mounting nut
127 (5.0)
28.5(1.13)
101.5(4)
11(.44)
Available with or without lock (see part number selection)
11.9(.47)
1.6(.06)
4.5 (.17)
1/4-20 Thread
49(1.94)
25.5(1.01)
Max. door thickness9.5 (.375)
R 3 (.13) Max.
DoorFrame
Min. 11 (.44)Max. 15.9 (.63)
82.5(3.25.01)
+0.3- 0.2
108(4.25.01)
+0.2- 0.3
Gapimportant(see installation notes)
Edge of frame ormodified latchingsurface (notch,hole, bracket orshim)
14.3 (.56) Min
Adjusting nut
Mountingbracket
LockwasherMounting nut
SlideFrame
11.9 (.47)20.6 (.81) Ref
PartNumberSelection
64 Push-to-Close LatchPull-to-open Paddle latch Large
Singleholeinstallation Concealedmounting Metalslide
MaterialandFinishStainless steel, brushed, steel, zinc plated or steel, black powder coated
PerformanceDetailsMax. working load: 1110 N (250 lbf)
InstallationNotesMeasure your door thickness and set adjusting nut so that GAP is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00)
AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01
Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05
L Lockstyle1 Non-locking2 Key-locking keyed alike H257 (2 keys supplied)
M Material4 Steel, zinc plated 5 Stainless steel brushed9 Steel, black powder coated
177
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
64 - 50 - 4 L H - M
www.southco.com/64
10.2 (.40)
108 (4.25)
139.7 (5.5)
22.6 (.89)
4 x rivet mounting latches only
23.4 (.92)
1.2(.05)
43 (1.7)
H
Available with or without lock (see part number selection)
Tapped hole 1/4-20 for inside release handle (not provided)
Frame
4 x R5 (.20)
4 x H Rivet
mounting only
Door
96.8(3.81)
86(3.38)
118 (4.65)95.2 (3.75)
20.9 (.82) 22(.87)
14 (.55)
15 (.59)
Part Number Selection
64 Push-to-Close LatchPull-to-open Paddle latch Large
Single hole installationMultiple mounting styles Inside actuation in locked
or unlocked position
Material and FinishStainless steel, polished, steel, zinc plated or steel, black powder coated
Slide bolt and lock assembly: Zinc plated or powder coated
Performance DetailsMax. working load: 560 N (125 lbf)
AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01
Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05
H Housing0 Weld1 Rivet through hole 4.9 (.19)2 Rivet through hole 5.2 (.20)
L Lock style0 Non-locking1 Key-locking keyed alike CH751 (2 keys supplied)
M Material10 Steel, zinc plated 20 Stainless steel polished50 Steel, black powder coated
178
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
64 - 40 - 4 L H - M
www.southco.com/64
108 (4.25)
139.7 (5.50)
23 (.91)
1.2 (.05)
40.9 (1.61)
12 (.45)
3 (.13)
6.3(.25)
2.3 (.09)
47 (1.85) Unlatched
70 (2.75) Latched
29 (1.14) Latched
25 (1.0) Unlatched
4 x rivet mounting latches onlyH
Available with or without lock (see part number selection)
4 x R 5 (.20)
4 x Rivet mounting only
Door
96.8 (3.81)
86 (3.38)
118 (4.65) 95.2 (3.75)
H
64 Push-to-Close ActuatorPull-to-open Paddle handle actuator Multi-point Large
Part Number Selection
For use with R4 rotary latches
Multiple mounting styles
Material and FinishStainless steel, polished, steel, zinc plated or black powder coated
AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01
Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05
NotesContact Southco for recommended cable or rods
For applicable rotary latches see page 121
H Housing0 Weld1 Rivet through hole 4.9 (.19)2 Rivet through hole 5.2 (.20)
L Lock style0 Non-locking1 Key-locking keyed alike CH751 (2 keys supplied)
M Material10 Steel, zinc plated 20 Stainless steel, polished50 Steel, black powder coated
179
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
64 - 60 - 5 L H - M
www.southco.com/64
83(3.27)
88.4(3.48)
9(.35)
5.3 (.21)
52(2.05)
110(4.33)
170 (6.7)
7 (.28)5 (.20)
100(3.94)
52(2.05)
52(2.05)
8 x rivet mounting latches onlyH
Available with or without lock (see part number selection)
Frame
37.9 (1.49)17.2 (.68)
Door thickness
147.7 (5.81)
89(3.50)
Door
4 x R5
Part Number Selection
64 Push-to-Close LatchPull-to-open Paddle latch Heavy-duty pivot
Robust design resists binding from dirt and debris
Multiple mounting styles
Material and FinishSteel, zinc plated or black powder coated
Slide bolt and lock assembly: Zinc plated or powder coated
Performance DetailsMax. working load: 2700 N (607 lbf)
AccessoriesFlat key, keyed alike 14603 (2 keys per ring) Part number: PK-10-01-14603
H Housing0 Weld1 Rivet through hole 4.9 (.19)2 Rivet through hole 5.2 (.20)
L Lock style0 Non-locking1 Key-locking keyed alike 14603 (2 keys supplied)
M Material10 Steel, zinc plated 50 Steel, black powder coated