172

Dimensions in millimeters (inch) unless otherwise stated

ACTUAL SIZE

Part Number

64-01-10

www.southco.com/64

11 (.42)

13 (.53)

43 (1.69)

28 (1.10)

0.9 (.036)

8 (.32)

1.6 (.065) Max.Door thickness

3.2.2(.125.010)

Total grip

24.5

39

9.50.8(.38.03)

R 1.5 (.06) max. +0.1 -0.3

+0.1 -0.3

(1.53.01)

(.96.01)

9 (.36)

M4 slotted hex head screw/lockwasherass'y (supplied)

Part NumberSee table

64 Push-to-Close LatchPull-to-open Paddle latch Miniature

Single hole installationConcealed mountingPlastic slide

Material and FinishStainless steel passivated and brushed finish and glass reinforced nylon, black

Performance DetailsMax. working load: 90 N (20 lbf)

Operating temperature range: -18C (0F) to 100C (210F)

Flammability rating: UL94-V0

Installation NotesMax. tightening torque on mounting screws: 0.9 Nm (8 inlbf)

173

Dimensions in millimeters (inch) unless otherwise stated

ACTUAL SIZE

Grip RangeSlide Style

AB

T (See

Notes)

Part Number Brushed Finish

Door Thickness Range

Min. Max. Min. Max. 3.7 (.144) Max.

3.9 - 7.3 (.154 - .288)

11.1 - 14.6 (.437 - .576)

18.6 - 22 (.734 - .868)

1.2 (.05) 2 (.08) 110.4 (.41)

12.7 (.50)

12.4 (.49)

1.6 (.063) 64-10-111-50 ~ ~ ~

2.8 (.11) 3.6 (.14) 2

11.9 (.47)

14.2 (.56)

14.2 (.56)

3.2 (.125) 64-10-113-50 64-10-133-50 ~ ~

6 (.23) 6.7 (.27) 3 6.4 (.250) 64-10-124-50 64-10-114-50 ~ ~

12.3 (.48) 13.1 (.52) 4 7.1 (.281) 64-10-125-50 64-10-135-50 64-10-115-50 64-10-115-50

18.6 (.73) 19.4 (.77) 5 7.1 (.281) 64-10-126-50 ~ 64-10-116-50 64-10-116-50

www.southco.com/64

56(2.20)

47(1.84)

42.5(1.67)

B

14(.56)

Cup

25(.97)

13 (.50)

Doorthicknessrange(see table)

Mounting nut

Stud, M4 Thread

BracketSlide (style 1 shown)

Griprange(see table)

1 (.04)

Cover

Paddle

47.50.2(1.88.01)

A

16 (.63) Min.

10.30.2 (.4101)

36.50.2(1.44.01)

Door

Frame

R 2 (.09) max.

Bracket

Stud

Mounting nut

Frame Door

Single hole installationConcealed mountingPlastic slide

Material and FinishStainless steel passivated and brushed or black powder coated and glass reinforced nylon, natural

Performance DetailsMax. working load:

Operating temperature range: -18C (0F) to 100C (210F)

Flammability rating: UL94-V0

Installation NotesDoor thickness must not exceed T dimension (see table) in area through which slide will operate.It may be necessary to reduce thickness of door in area indicated by grid.

Slide styles:

NotesFor an assembly with black powder coated finish change last digit from 0 to 5 - Example: 64-10-111-55

64 Push-to-Close LatchPull-to-open Paddle latch Small

Style 2

Style 3

Style 4

Style 5

Style Max. Static Load N (lbf)

1 130 (30)

2 110 (25)

3 90 (20)

4 70 (15)

5 55 (12)

174

Dimensions in millimeters (inch) unless otherwise stated

ACTUAL SIZE

Grip Range Part Number AB

Min. Max. Stainless Steel, Brushed Stainless Steel Black Powder coated Min. Max.

1.2 (.05) 2 (.08) 64-11-10 64-11-12 10.4 (.41) 12.7 (.50) 11.5 (.45)

2 (.08) 2.8 (.11) 64-11-20 64-11-22 11.2 (.44) 13.5 (.53) 11.9 (.47)

2.8 (.11) 3.6 (.14) 64-11-30 64-11-32 11.9 (.47) 14.2 (.56) 12 (.48)

www.southco.com/64

R 2 (.09) max.

47.50.2(1.88.01)

A

36.50.2(1.44.01)

FrameDoor

Bracket

Stud

Mounting nut

Door

Frame

56(2.20)

B Grip range(see table)

Stud, M4 Thread

25(.97)

13 (.50)

1 (.04)

47(1.84)

42.5(1.67) 14 (.56)

Cup

Slide

CoverBracket

Mounting nut

Paddle

Part NumberSee table

64 Push-to-Close LatchPull-to-open Paddle latch Small

Single hole installationConcealed mountingMetal slide

Material and FinishStainless steel passivated and brushed or black powder coated, steel, chrome plated

Performance Details Max. working load: 222 N (50 lbf)

175

Dimensions in millimeters (inch) unless otherwise stated

ACTUAL SIZE

64 - 2 L - 1 M

www.southco.com/64

8(.31)

84(3.31)

1.2 (.05)

M5 Thread

Gap important(See installation notes)

68.5(2.69)

19(.75)

36(1.39)

17.5(.69)

6.4 (.25) Max.

Doorthickness

7.9 (.31)

Frame

DoorLatch

Mounting bracketAdjusting nut

LockwasherMounting nut

Available with or without lock(see part number selection)

R 2.5 (.09) Max.

DoorFrame

Min. 8 (.31)Max. 11 (.44)

55.5(2.19.01)

+0.3- 0.1

71.5(2.81.01)

+0.1- 0.3

Gapimportant(see installation notes)

Edge of frame ormodified latchingsurface (notch,hole, bracket orshim)

11.1 (.44) Min

Adjusting nut

Mountingbracket

LockwasherMounting nut

SlideFrame

7.9 (.31)8. (.31) Min11 (.44) Max

14.3 (.56) Ref

Door

Part Number Selection

64 Push-to-Close LatchPull-to-open Paddle latch Medium

Single hole installationConcealed mountingMetal slide

Material and FinishStainless steel brushed, steel, zinc plated or steel, black powder coated or silver

Performance DetailsMax. working load: 570 N (125 lbf)

Installation NotesMeasure your door thickness and set adjusting nut so that GAP is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00).

AccessoriesFlat key, keyed alike H257 (2 keys per ring) Part number: 64-0-33578

M Material0 Stainless steel, brushed 1 Steel, black powder coated3 Steel, zinc plated5 Steel, powder coated silver

L Lock style1 Non-locking2 Key-locking keyed alike H257 (2 keys supplied)

176

Dimensions in millimeters (inch) unless otherwise stated

ACTUAL SIZE

64-10 - 30 L - M 0

www.southco.com/64

Gap important(See installation notes)

Frame

Door

Mounting bracket

Adjusting nutLockwasher

Mounting nut

127 (5.0)

28.5(1.13)

101.5(4)

11(.44)

Available with or without lock (see part number selection)

11.9(.47)

1.6(.06)

4.5 (.17)

1/4-20 Thread

49(1.94)

25.5(1.01)

Max. door thickness9.5 (.375)

R 3 (.13) Max.

DoorFrame

Min. 11 (.44)Max. 15.9 (.63)

82.5(3.25.01)

+0.3- 0.2

108(4.25.01)

+0.2- 0.3

Gapimportant(see installation notes)

Edge of frame ormodified latchingsurface (notch,hole, bracket orshim)

14.3 (.56) Min

Adjusting nut

Mountingbracket

LockwasherMounting nut

SlideFrame

11.9 (.47)20.6 (.81) Ref

PartNumberSelection

64 Push-to-Close LatchPull-to-open Paddle latch Large

Singleholeinstallation Concealedmounting Metalslide

MaterialandFinishStainless steel, brushed, steel, zinc plated or steel, black powder coated

PerformanceDetailsMax. working load: 1110 N (250 lbf)

InstallationNotesMeasure your door thickness and set adjusting nut so that GAP is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00)

AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01

Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05

L Lockstyle1 Non-locking2 Key-locking keyed alike H257 (2 keys supplied)

M Material4 Steel, zinc plated 5 Stainless steel brushed9 Steel, black powder coated

177

Dimensions in millimeters (inch) unless otherwise stated

ACTUAL SIZE

64 - 50 - 4 L H - M

www.southco.com/64

10.2 (.40)

108 (4.25)

139.7 (5.5)

22.6 (.89)

4 x rivet mounting latches only

23.4 (.92)

1.2(.05)

43 (1.7)

H

Available with or without lock (see part number selection)

Tapped hole 1/4-20 for inside release handle (not provided)

Frame

4 x R5 (.20)

4 x H Rivet

mounting only

Door

96.8(3.81)

86(3.38)

118 (4.65)95.2 (3.75)

20.9 (.82) 22(.87)

14 (.55)

15 (.59)

Part Number Selection

64 Push-to-Close LatchPull-to-open Paddle latch Large

Single hole installationMultiple mounting styles Inside actuation in locked

or unlocked position

Material and FinishStainless steel, polished, steel, zinc plated or steel, black powder coated

Slide bolt and lock assembly: Zinc plated or powder coated

Performance DetailsMax. working load: 560 N (125 lbf)

AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01

Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05

H Housing0 Weld1 Rivet through hole 4.9 (.19)2 Rivet through hole 5.2 (.20)

L Lock style0 Non-locking1 Key-locking keyed alike CH751 (2 keys supplied)

M Material10 Steel, zinc plated 20 Stainless steel polished50 Steel, black powder coated

178

Dimensions in millimeters (inch) unless otherwise stated

ACTUAL SIZE

64 - 40 - 4 L H - M

www.southco.com/64

108 (4.25)

139.7 (5.50)

23 (.91)

1.2 (.05)

40.9 (1.61)

12 (.45)

3 (.13)

6.3(.25)

2.3 (.09)

47 (1.85) Unlatched

70 (2.75) Latched

29 (1.14) Latched

25 (1.0) Unlatched

4 x rivet mounting latches onlyH

Available with or without lock (see part number selection)

4 x R 5 (.20)

4 x Rivet mounting only

Door

96.8 (3.81)

86 (3.38)

118 (4.65) 95.2 (3.75)

H

64 Push-to-Close ActuatorPull-to-open Paddle handle actuator Multi-point Large

Part Number Selection

For use with R4 rotary latches

Multiple mounting styles

Material and FinishStainless steel, polished, steel, zinc plated or black powder coated

AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01

Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05

NotesContact Southco for recommended cable or rods

For applicable rotary latches see page 121

H Housing0 Weld1 Rivet through hole 4.9 (.19)2 Rivet through hole 5.2 (.20)

L Lock style0 Non-locking1 Key-locking keyed alike CH751 (2 keys supplied)

M Material10 Steel, zinc plated 20 Stainless steel, polished50 Steel, black powder coated

179

Dimensions in millimeters (inch) unless otherwise stated

ACTUAL SIZE

64 - 60 - 5 L H - M

www.southco.com/64

83(3.27)

88.4(3.48)

9(.35)

5.3 (.21)

52(2.05)

110(4.33)

170 (6.7)

7 (.28)5 (.20)

100(3.94)

52(2.05)

52(2.05)

8 x rivet mounting latches onlyH

Available with or without lock (see part number selection)

Frame

37.9 (1.49)17.2 (.68)

Door thickness

147.7 (5.81)

89(3.50)

Door

4 x R5

Part Number Selection

64 Push-to-Close LatchPull-to-open Paddle latch Heavy-duty pivot

Robust design resists binding from dirt and debris

Multiple mounting styles

Material and FinishSteel, zinc plated or black powder coated

Slide bolt and lock assembly: Zinc plated or powder coated

Performance DetailsMax. working load: 2700 N (607 lbf)

AccessoriesFlat key, keyed alike 14603 (2 keys per ring) Part number: PK-10-01-14603

H Housing0 Weld1 Rivet through hole 4.9 (.19)2 Rivet through hole 5.2 (.20)

L Lock style0 Non-locking1 Key-locking keyed alike 14603 (2 keys supplied)

M Material10 Steel, zinc plated 50 Steel, black powder coated