Post on 02-Jun-2018
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
1/102
www.huawei.com
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
BSC6000Operation and
Maintenance
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
2/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page2
Foreword
This course introduces basic concepts about operation and
maintenance of the BSC6000 system, and describes in
details about the operation steps and methods of using
LMT to perform the operation and maintenance of the BSCand the BTS
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
3/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page3
About This Course
BSC6000 LMT User Guide
BSC6000 System Description
Online Help
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
4/102Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page4
Objectives
Upon completion of this course, you will be able to:
Get a grasp of the task for daily operation and
maintenance
Get a good grasp of the BSC operation and maintenance
Get a good grasp of the BTS operation and maintenance
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
5/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page5
Contents
1. Introduction to O&M
2. System Management
3. BSC Maintenance
4. Site Maintenance
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
6/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page6
Log In the LMT
Function Description
Log in the LMT
Procedure
Step 1: Choose Start > All
Programs > Huawei Local
Maintenance Terminal >
BSC6000 Local
Maintenance Terminal
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
7/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page7
Log In the LMT
Procedure
Step 2: Type the BSC name, BSC IP address, and remarks
Step 3: Click Add, and then click Close to return to the Login
dialog box
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
8/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page8
BSC6000 LMT Window
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
9/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page9
Navigation Bar
Management Tree
Displaying all the sites, cells, and
TRXs in the BSC
Providing query, management, andbrowse of the objects
Trace & Monitor
Tracing messages on the interfaces
Monitoring the CPU/DSP usage
and port bit error rates
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
10/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page10
Overview of the FunctionsFunction Description Reference
System
management
Online management
BSC management
Parameter configuration management
2 System Management
BSC
maintenance
Query and maintenance of the BSC equipment, links,
channel resources, and logs
3 BSC Maintenance
Site
maintenance
Monitoring, query, and maintenance of sites, cells, TRXs,
and boards
4 Site Maintenance
Software
management
Download, load, activation, and rollback of BSC
software, patches, license, and BIOS
Query of the board software
5 Software
Management
System
configuration
Import and export of network parameters
Cell data configuration in batches
Data backup and restoration
Data consistency check
6 System Configuration
Alarm
management
Browse and query of alarms
Maintenance and configuration of the alarm box
7 Alarm Management
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
11/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page11
Contents
1. Introduction to O&M
2. System Management
3. BSC Maintenance
4. Site Maintenance
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
12/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page12
Lock the LMT
Function Description
To manually lock the BSC6000
Local Maintenance Terminal
This operation can preventunsafe operations of
unauthorized users
Procedure
Choose System > Lock
System or Press F6
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
13/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page13
Change the Password
Function Description
To change the password of the
existing user
All the users except the guests can
change their passwords. Thechanged password takes effect when
you log in to the GBAM next time
Procedure
Choose System > ChangePassword
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
14/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page14
Manage User Information
Function Description
To add an external user
account and set the related
information
To delete an external user
account
To modify an external user
account
Procedure
Choose System > User
Management
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
15/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page15
Manage BSC Information
Function Description
To add/delete a BSC
To modify BSC
information
Procedure
Choose System > BSC
Management
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
16/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page16
Manage the System Configuration
Function Description
To set the default information
about system auto action
Such information includes
system auto lock time,
command timeout, maximum
lines in progress window, and
cell LAC and CI display mode
Procedure
Choose System > System
Configuration
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
17/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page17
Contents
1. Introduction to O&M
2. System Management
3. BSC Maintenance
4. Site Maintenance
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
18/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page18
Query Board Information
Function Description
To query the following information:
Board status: The board status consists of the subrack number,
slot number, management status, operation status, active/standby
status, availability status, and alarm status
Board information: Board delivery information
Board property: Board temperature
Procedure
Choose BSC Maintenance > Maintain Device > Query BSC
Board Information
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
19/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page19
Query Board Information
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
20/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page20
Switchover BSC Board
Function Description
To transfer the services carried in the active board to the
standby board when the active board fails
Be cautious when switching over a board. If the board
switchover fails, the related links will be disrupted and the
service data will be lost
Procedure
Choose BSC Maintenance > Maintain Device > Switch Over
BSC Board
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
21/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page21
Switchover BSC Board
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
22/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page22
Reset BSC Board
Function Description
To reset a BSC board , to reset the CPU or to reset the DSP
Be cautious when resetting a board. If the standby board of the
board to be reset is not installed or fails, the services carried on
this board will be disrupted when the board is reset
Procedure
Choose BSC Maintenance > Maintain Device > Reset BSC
Board
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
23/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page23
Reset BSC Board
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
24/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page24
Query the CPU/DSP Usage
Function Description
To query the real-time usage of the CPU and the DSP
Procedure
Choose BSC Maintenance > Maintain Device > QueryCPU/DSP Usage
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
25/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page25
Query CPU/DSP Status
Function Description
To query the status of the CPU in the GXPUM and the GXPUC
or the status of the DSP in the GDSUC
The status includes availability status, management status,
standby status, operation status, and alarm status
Procedure
Choose BSC Maintenance > Maintain Device > Query
CPU/DSP State
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
26/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page26
Query CPU/DSP Status
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
27/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page27
Reset the GBAM Process
Function Description
To reset the GBAM process
when the GBAM is faulty
Procedure Choose System > Reset
GBAM Process
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
28/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page28
Maintain the Fan Box
Function Description
To query the attributes of the fan box and reset the fan box
The fan box is used to maintain the working temperature of the
BSC boards. To maintain the normal running of the fan box, you
need to monitor and maintain the fan box in real time
Procedure
Choose BSC Maintenance > Maintain Device > Maintain Fan
Box
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
29/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page29
Maintain the Fan Box
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
30/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page30
Reset the Power Distribution Box
Function Description
To reset the power distribution box
The power distribution box provides power supply to the cabinet.
When the power distribution box fails, reset it to recover its
functions such as power detection and over voltage protection
Procedure
Choose BSC Maintenance > Maintain Device > Reset Power
Box
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
31/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page31
Reset the Power Distribution Box
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
32/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page32
Reset Subrack
Function Description To reset all the boards in a subrack
When the control subrack of the fan box or power distribution
box is reset, the fan box or power distribution box is also reset
The reset of a BSC6000 subrack disrupts the existing services
of the system. Be cautious when resetting a subrack
Procedure
Choose BSC Maintenance > Maintain Device > ResetSubrack
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
33/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page33
Reset Subrack
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
34/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page34
Query Board Clock Status
Function Description To query the status of
the input clock of a board
The clock types for
different boards is
different
Procedure
Choose BSCMaintenance > Maintain
Device > Query Board
Clock Status
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
35/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page35
Query BSC Clock Reference Status
Function Description
To query the work status
of the existing system
clock
Procedure
Choose BSC
Maintenance > Maintain
Device > Query BSC
Clock Reference Status
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
36/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page36
Maintain LAPD Links
Function Description To query the LAPD link status.
On the basis of the LAPD link
status, you can block, unblock,
perform loopback tests, and
reset the LAPD link
Procedure
Choose BSC Maintenance >Maintain Transmission and
Signaling > Maintain LAPD
Link
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
37/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page37
Query the Status of the Ater OML
Function Description
To query the status of the
HDLC link
Procedure
Choose BSC Maintenance
> Maintain Transmission
and Signaling > Query Ater
OML State
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
38/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page38
Maintain the SCCP
Function Description
To query the maintenance
information about the Signaling
Connection Control Part (SCCP)
The SCCP maintenance information
includes Destination Signaling Point
(DSP) status, SCCP status, and
congestion status of the SCCP
Procedure
Choose BSC Maintenance >
Maintain Transmission and
Signaling > Maintain SCCP
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
39/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page39
Maintain MTP3 Links
Function Description To query the link status, route status, DSP status of MTP3 links
To activate, deactivate, inhibit, or enable MTP3 links on the
basis of the query result
Procedure
Choose BSC Maintenance > Maintain Transmission and
Signaling > Maintain MTP3 Link
M i i MTP3 Li k
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
40/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page40
Maintain MTP3 Links
M i t i i MTP2 Li k
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
41/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page41
Maintaining MTP2 Links
Function Description To query the physical link status of the MTP2
Procedure
Choose BSC Maintenance > Maintain Transmission and Signaling
> Query MTP2 Link State
Q th I t f B d P t St t
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
42/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page42
Query the Interface Board Port State
Function Description To query the configuration status, work mode, and availability of
E1/T1 ports
Procedure
Choose BSC Maintenance > Maintain Transmission and
Signaling > Query Interface Board Port State
Q th I t f B d P t St t
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
43/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page43
Query the Interface Board Port State
Maintain the Interface Board Port
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
44/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page44
Loopback
Function Description
To query the port number,
loopback status, and loopback
remaining time
To start or stop the loopback onthe basis of the query result
Procedure
Choose BSC Maintenance >
Maintain Transmission and
Signaling > Interface Board
Port Loopback
M i t i th P t Ti l t L b k
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
45/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page45
Maintain the Port Timeslot Loopback
Function Description
To query the timeslot number,
loopback mode, and loopback
status
To start or stop the loopback on
the basis of the query result
Procedure
Choose BSC Maintenance >
Maintain Transmission and
Signaling > Interface Board Port
Timeslot Loopback
Query Abis Interface Status
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
46/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page46
Query Abis Interface Status
Function Description To query the timeslot information, such as timeslot number,
timeslot type, and timeslot status, of the Abis interface circuits
Procedure
Choose BSC Maintenance > Maintain User Resource >
Query Abis Interface Timeslot State
Query Abis Interface Status
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
47/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page47
Query Abis Interface Status
Query Ater Interface Status
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
48/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page48
Query Ater Interface Status
Function Description
To query the timeslots of the Ater interface
circuits
The Ater interface is the interface between
the local end and the remote end of theBSC6000. It is an internal interface
Procedure
Choose BSC Maintenance > Maintain
User Resource > Query Ater Interface
Timeslot State
Maintain the A Interface
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
49/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page49
Maintain the A Interface
Function Description To query the circuit status on
the A interface
To block, unblock, and reset
the A interface circuits based
on the query results
Procedure
Choose BSC Maintenance >
Maintain User Resource >
Maintain A Interface Circuit
Maintain the Pb Interface
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
50/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page50
Maintain the Pb Interface
Function Description To query the circuit status on the Pb interface
To block, unblock, and reset the Pb interface circuits based on
the query results
The Pb interface is the interface between the Packet Control
Unit (PCU) and the BSC. It is a Huawei internal interface
Procedure
Choose BSC Maintenance > Maintain User Resource >
Maintain Pb Interface Circuit
Maintain the Pb Interface
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
51/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page51
Maintain the Pb Interface
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
52/102
Query TC Resources
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
53/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page53
Query TC Resources
Query Call Resources
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
54/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page54
Query Call Resources
Function Description To query the call resource
information, such as service
type, cell number, and TRX
number, of a user
Procedure
Choose BSC Maintenance
> Maintain User Resource> Query Call Resources
Remote Speech Loopback
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
55/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page55
Remote Speech Loopback
Function Description
To start or stop the remote speech
loopback
To query the status of all the existing
remote speech loopback
The remote speech loopback is used
to locate external speech problems
Procedure
Choose BSC Maintenance >
Maintain User Resource > Remote
Speech Channel Loopback
Test the Inner Speech Channel
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
56/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page56
Test the Inner Speech Channel
Function Description To test the inner speech
channel
The inner speech channel test is
used to locate the inner speech
problems
Procedure
Choose BSC Maintenance >
Maintain User Resource >
Test Internal Speech Channel
Set the DSP Preferential
A i t
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
57/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page57
Assignment Function Description
To set the DSP preferential
assignment
To query the status of the speech
channels
The DSP preferential assignment can
avoid large-scale tests
Procedure
Choose BSC Maintenance >
Maintain User Resource > Set DSP
Preferential Assignment
Set DSP Speech Channel
L b k
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
58/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page58
Loopback Function Description
To start the DSP speech
channel loopback
Procedure
Choose BSC Maintenance
> Maintain User Resource
> DSP Speech Channel
Loopback
Contents
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
59/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page59
Contents
1. Introduction to O&M
2. System Management
3. BSC Maintenance
4. Site Maintenance
Download the BTS Software
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
60/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page60
o oad e S So a e
Function Description
To download the BTS software from the LMT to the GBAM
through the FTP Server
Procedure
Choose BTS Maintenance > Download BTS Software
Configure the BTS Software
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
61/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page61
g
Function Description
To set the file type, file name, version number, BTS type for the
downloaded software before BTS software loading
Procedure
Choose BTS Maintenance > Configure BTS Software
Load the BTS Software
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
62/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page62
Function Description
To write the configured file into the flash of the BTS
To check whether the file is consistent with the version number
configured
Procedure
Choose BTS Maintenance > Load BTS Software
Load the BTS Software
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
63/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.Page63
Activate the BTS Software
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
64/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.Page64
Function Description
To obtain the required data or software information from the
flash to boards
The BTS software must be activated before running
Procedure
Choose BTS Maintenance > Activate BTS Software
Activate the BTS Software
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
65/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page65
Query BTS Running Status
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
66/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page66
Function Description
To query the running status of the BTSs controlled by a BSC
Procedure
Choose BTS Maintenance > Query BTS Running Status
Query the Board Running Software
Version
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
67/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page67
Version
Function Description
To query the board running software version of the BTS
Procedure
Choose BTS Maintenance > Query Board Running Software
Version
Query the Board Match
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
68/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page68
Function Description
To query whether the actual board type matches the configured
board type
Procedure
Choose BTS Maintenance > Query Board Match
Query the Board Bar Code
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
69/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page69
Function Description
To query the bar codes of BTS boards
The bar code of a board indicates the manufacturing information
of the board. When errors occur in several boards, query the bar
codes to check whether the boards produced in a batch are
faulty
Procedure
Choose BTS Maintenance > Query Board Bar Code
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
70/102
Query BTS Attributes
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
71/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page71
Function Description
To query BTS attributes, such as Manufacturer ID, Software
Configuration, and Hardware Configuration
Procedure
Choose BTS Maintenance > Query BTS Attributes
Reset the BTS in Levels
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
72/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page72
Function Description
To reset a or a cell or site at level 3 or level 4
Be cautious about BTS reset. The reset of a BTS leads to site
initialization, data reloading, and service disruption
Procedure
Choose BTS Maintenance > Reset BTS in Levels
Browse BTS Initialization Process
Messages
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
73/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page73
Messages
Function Description
To browse the initialization process of all the sites controlled by
a BSC
The initialization process message shows the site reset. If the
initialization fails, this message shows the failure cause
Procedure
Choose BTS Maintenance > Browse BTS Initialization
Process Message
Browse Initialization Process
Messages
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
74/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page74
essages
Modify Management Status
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
75/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page75
Function Description
To lock, unlock, or shut down a
cell, TRX, or channel
The status of an object can be
modified only when its upper-level objects are unlocked
Procedure
Choose BTS Maintenance >
Modify Management Status
Perform Force Handover
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
76/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page76
Function Description
To hand over a call from
one cell to another cell
to ensure that no call
drops occur during sitemaintenance
Procedure
Choose BTSMaintenance > Force
Handover
Monitor Channel Status
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
77/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page77
Function Description
To monitor the status of channels and sub channels
Procedure
Choose BTS Maintenance > Monitor Channel Status
Monitor the Channel Interference Band
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
78/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page78
Function Description
To monitor the interference band of idle channels
The interference band is the uplink interference level reported by the
BTS to the BSC through an RF RESOURCE INDICATION message.
The interference band is divided into five grades, as listed in Table 4-2
If the interference band of an idle channel is in grades 4 or 5, the
channel interference exists
Procedure
Choose BTS Maintenance > Monitor Channel Interference Band
Monitor the Channel Interference Band
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
79/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page79
Query BTS Running Software Version
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
80/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page80
Function Description
To query the software version of a BTS
Procedure
Choose BTS Maintenance> Maintain Site> Query BTS
Running Software Version
Test Site
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
81/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page81
Function Description
To check the BTS status by testing the running status of all the
boards in a site
Procedure
Choose BTS Maintenance > Maintain Site > Test BTS
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
82/102
Monitor BTS Resources
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
83/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page83
Monitor Environment
F ti D i ti
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
84/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page84
Function Description
To monitor the environment, for example, to reset or clear an alarm
and query the temperature and humidity
Procedure
Choose BTS Maintenance > Maintain Site > Monitor
Environment
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
85/102
Query Frequency Scan
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
86/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page86
Function Description
To query frequency scan
Procedure
Choose BTS Maintenance > Maintain Cell > Query
Frequency Scan
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
87/102
Configure Frequency Scan
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
88/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page88
Test TRX Performance
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
89/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page89
Function Description
To test the performance of all the TRXs or selected TRXs in a site
The test items include interference level and power level
Procedure
Choose BTS Maintenance > Maintain TRX > Test TRX
Performance
Query the Power Mode
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
90/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page90
Function Description
To query the power mode of TRXs
Procedure
Choose BTS Maintenance >
Maintain TRX > Query Power
Mode.
Set Location. Select the TRXs in
the Candidate TRXs box and addthem to the Selected TRXs box,
and then click Query
Query the Automatic Power Correction
TypeF i D i i
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
91/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page91
Function Description
To query the automatic power
correction type
Procedure
Choose BTS Maintenance >Maintain TRX > Query
Automatic Power Correction
Type.
Test TRX Loopback
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
92/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page92
Function Description
To test TRX loopback
The TRX loopback test
consists of BIU Loop Test
and TRX Self Test
Procedure
Choose BTS Maintenance
> Maintain TRX > TestTRX Loopback
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
93/102
Test Idle Timeslots
F ti D i ti
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
94/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page94
Function Description
To test idle timeslots
In the network optimization process, the network has to be
manually set to maximum interference mode to obtain the
maximum interference of the entire network. All the idle
timeslots in a specific area are set to send idle frames to
achieve this maximum interference mode
Procedure
Choose BTS Maintenance > Maintain TRX > Test Idle
Timeslot
Test Idle Timeslots
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
95/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page95
Test the CODEC Mode
Function Description
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
96/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page96
Function Description
To test the CODEC mode
Procedure
Choose BTS Maintenance > Maintain TRX > Test CODEC
Mode
Reset TRX
Function Description
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
97/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page97
Function Description
To reset a TRX
Procedure
Choose BTS Maintenance > Maintain TRX > Reset TRX
Query Board Information
Function Description
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
98/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page98
Function Description
To query board information,
such as the software version
and hardware version
Procedure
Choose BTS Maintenance
> Maintain Board > Query
Board Information
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
99/102
Reset a Board
Function Description
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
100/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page100
To reset a board, such as the CDU, TRX, TMU, PBU, TEU, TES,
or EAC
Procedure
Choose BTS Maintenance > Maintain Board > Reset Board
Summary
In this course we have learned
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
101/102
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page101
In this course we have learned
The daily operation and maintenance of BSC6000
The BSC operation and maintenance of BSC6000
The BTS operation and maintenance of BSC6000
8/10/2019 4..OMD6.00201 HUAWEI BSC6000 Operation and Maintenance ISSUE1.0.ppt
102/102