Post on 21-Jul-2020
1
4FT T8 LED TUBE LIGHT SPECIFICATION
Main features:DLC energy saving cer�fica�onUL and ETL safety cer�fica�on5Years warrantyEnergy star LM -80SMD as ligh�ng sourceSuper -thick patented aluminum heat sink and op�cal diffuser for excellent heat dissipa�ngStandard G13 Bi -Pin Clear and frosted PC lensTwo ends electricity is optional
AL body & PC cover
Applica�on:
4FT linear lamp replacement1*4 and 2*4 fluorescent troffer
Whole PC body
www.pla�numled-usa.com |
2
Parameters:
Model No Size Input Voltage
Power Lumen CRI Driver Material Cer�fica�on CCT
ML-T8503F 4FT AC100-277Vac
20W >110LPM; 2200LM
>80Ra Built-in AL&PC cover
UL 3500K-6500K
ML-T8503F 4FT AC100-277Vac
15W >130LPM;1950LM
>80Ra Built-in AL&PC cover
UL&DLC 4000K
ML-T8503F 4FT AC100-277Vac
18W >130LM;2340LM
>85Ra Built-in AL&PC cover
UL&DLC 5000K
MC-T8603F-15X
4FT AC100-277Vac
15W >105LPW;1575LM
>85Ra Built-in Whole PC ETL 3500K-6500K
Dimension:
A=1198mmB=1212mm
Specification
www.pla�numled-usa.com |
3
Test report: Model No.:ML-T8503F(UL only)
Specification
www.pla�numled-usa.com |
4
Model No.:ML-T8503F(UL and DLC)
Specification
www.pla�numled-usa.com |
5
Model No.:ML-T8603F-15D(ETL whole PC body)Specification
www.pla�numled-usa.com |
6
Whole PC body, uniform light
There is aluminum plate on the bottom of inner ,to fix the PCB and eliminate the heat
PCB board with LM-80 SMD
Built-in driver
Whole PC body LED tube structure:
Stronger 0.75mm thickness aluminum body as heat sink
19mm width PCB board with LM-80SMD
0.85mm thickness PC cover
Built-in driver is protected by the plastic protector.Meanwhile, Insulation purpose.
AL body LED tube structure:
Specification
www.pla�numled-usa.com |
Installation Guide:1.Cut off power supply before installa�on. Remove electronic ballast. Cut the wires that connect the ballast to the end caps of the ligh�ng fixture. Cut close to the ballast (Picture 1)2.Connect A an B of conven�onal fluorescent lamp holders together respec�vely. (N) 3.Connect C and D of conven�onal fluorescent lamp holders together respec�vely. (L)(Picture 2)4.Connect incoming nega�ve wire to the metal ground screw or fixture.(Not Shown)5.Connect fluorescent lamp holder ends to power supply. One wire from the electrical input is connected to one end of the fixture wires (L). The other wire from the electrical input is connected to one end of the fixture wires (N). 6. Do not connect both ends of the light fixture to the same electrical input wire.(Picture 3)
WARNING:RISK OF ELECTRICAL SHOCK.TURN OFF POWER BEFORE INSTALLING,REMOVING OR INSPECTING.WARNING:ALL WIRING TO BE PERFORMED IN ACCORDANCE WITH ELECTRICAL CODE AND LOCAL ELECTRICAL CODEWARNING:RISK OF FIRE.FIXTURES ARE RATED FOR USE IN 100-277Vac,50-60HZ PROTECTED CIRCUIT AND 900CRATED SUPPLY WIRE.WARNING:RISK OF CUT.THE ENCLOSED PRODUCT MAY HAVE SHARP EDGES,WEAR GLOVES TO PREVENT CUTS WHEN HANDING,REMOVING,INSTALLING AND MAINTAINING THIS PRODUCT.
Specification
7www.pla�numled-usa.com |
8
Packaging:
Model No. PCS/CTN GW/CTN Size
ML-T8503F 25PCS 10KGS 124*21*28CM
MC-T8603F-15X 25PCS 8.5KGS 124*21*28CM
Specification
www.pla�numled-usa.com |
AC Series
150940150918150869(18W)
4FT
LED
T8 T
UBES
Specifications
Due to continuous product improvement, information in this document is subject to change.
1939 Parker Ct, Stone Mountain, GA 30087 | Phone: (866) 786-1117 | www.beyondledtechnology.com
Others
Fixture Specifications
Indoor Lighting
Warranty & Qualification
WARRANTY UL DLC
5 Year Limited Yes Yes
CONSUMPTION 18W
INPUT VOLTAGE 100 - 277Vac, 50/60Hz
VIEWING ANGLE 150°
POWER FACTOR
LED BRAND EPISTAR / San'an
LED TYPE SMD2835
LED QTY 120 PCS
HOUSING Aluminum
COVER PC
OPERATINGTEMPRATURE
APPLICATION CONNECTORS CRI DIMMABLE
-4°F TO 1 °F Indoor G13 >80 No
AC Series
SKU # Model # Watts Lumens LengthCCT Lens Power Certifications
150940 BLT-T8-4TYB-18W-SDMF 18W 2250Lm 5000K
5000K
4’ Frosted Type B 1 End UL & DLC
150918 BLT-T8-4TYB-18W-SNCF 18W 2340Lm 4000K 4’ Clear Type B 2 End UL & DLC
150869 BLT-T8-4TYB-18W-SDCF 18W 2340Lm 4’ Clear Type B 2 End UL & DLC
CORRELATEDCOLOR TEMPERATURE
(CCT)
Indoor Lighting4F
T LE
D T8
TUB
ES BOX TYPE SIZE QTY / CARTON WEIGHT / CARTON
Single 49” x 10.2” x 8.8” 25 Pcs 17 lbs
Due to continuous product improvement, information in this document is subject to change.
1939 Parker Ct, Stone Mountain, GA 30087 | Phone: (866) 786-1117 | www.beyondledtechnology.com
49”7”
7”
AC Series
AC Series
NOTHINGBUT LEDS
2725 Mountain Industrial Blvd.Tucker, GA 30084nothingbutleds.com1-800-414-8919
3
LED 4ft T8 Tubes
Nothing But LED's AC Series LED T8 Tubes reduce operational costs, lower maintenance costs, and are an easy retrofit. The power factor is greater than .90 with a beam angle of 150°. Furthermore, our AC Series has an efficiency up to 120 lumens per watt, direct power with an internal driver, and an aluminum housing with a PC cover.
• Reduced operational costs.
• Lower maintenance costs.
• Efficiency up 120 lumens per watt.
• Direct Power with internal driver.
Description
AC Series
47.2”47.7”
Application Indoor
Lifespan > 80,000 Hours
Input Voltage 100-277 Vac
Warranty 5 Years
SKU # Model # Watts Lumens CCT Length Cover Power Certifications
786552 ZS-T8F1218T 22W 18800Lm 6500K 4’ Clear 2 End UL, cUL, & DLC
786553 ZS-T8F1218T 18W 25000Lm 5000K 4’ Clear 1 End UL, cUL, & DLC
786554 ZS-T8F1222T 22W 37500Lm 5000K 4’ Clear 1 End UL, cUL, & DLC
786555 ZS-T8F1222R 22W 18800Lm 5000K 4’ Frosted 1 End UL, cUL, & DLC