4FT LED tube specification LEDview...LED 4ft T8 Tubes Nothing But LED's AC Series LED T8 Tubes...

1

4FT T8 LED TUBE LIGHT SPECIFICATION

Main features:DLC energy saving cer�fica�onUL and ETL safety cer�fica�on5Years warrantyEnergy star LM -80SMD as ligh�ng sourceSuper -thick patented aluminum heat sink and op�cal diffuser for excellent heat dissipa�ngStandard G13 Bi -Pin Clear and frosted PC lensTwo ends electricity is optional

AL body & PC cover

Applica�on:

4FT linear lamp replacement1*4 and 2*4 fluorescent troffer

Whole PC body

www.pla�numled-usa.com |

2

Parameters:

Model No Size Input Voltage

Power Lumen CRI Driver Material Cer�fica�on CCT

ML-T8503F 4FT AC100-277Vac

20W >110LPM; 2200LM

>80Ra Built-in AL&PC cover

UL 3500K-6500K


15W >130LPM;1950LM


UL&DLC 4000K


18W >130LM;2340LM


UL&DLC 5000K

MC-T8603F-15X

4FT AC100-277Vac

15W >105LPW;1575LM

>85Ra Built-in Whole PC ETL 3500K-6500K

Dimension:

A=1198mmB=1212mm

Specification


3

Test report: Model No.:ML-T8503F(UL only)

Specification


4

Model No.:ML-T8503F(UL and DLC)

Specification


5

Model No.:ML-T8603F-15D(ETL whole PC body)Specification


6

Whole PC body, uniform light

There is aluminum plate on the bottom of inner ,to fix the PCB and eliminate the heat

PCB board with LM-80 SMD

Built-in driver

Whole PC body LED tube structure:

Stronger 0.75mm thickness aluminum body as heat sink

19mm width PCB board with LM-80SMD

0.85mm thickness PC cover

Built-in driver is protected by the plastic protector.Meanwhile, Insulation purpose.

AL body LED tube structure:

Specification


Installation Guide：1.Cut off power supply before installa�on. Remove electronic ballast. Cut the wires that connect the ballast to the end caps of the ligh�ng fixture. Cut close to the ballast (Picture 1)2.Connect A an B of conven�onal fluorescent lamp holders together respec�vely. (N) 3.Connect C and D of conven�onal fluorescent lamp holders together respec�vely. (L)(Picture 2)4.Connect incoming nega�ve wire to the metal ground screw or fixture.(Not Shown)5.Connect fluorescent lamp holder ends to power supply. One wire from the electrical input is connected to one end of the fixture wires (L). The other wire from the electrical input is connected to one end of the fixture wires (N). 6. Do not connect both ends of the light fixture to the same electrical input wire.(Picture 3）

WARNING:RISK OF ELECTRICAL SHOCK.TURN OFF POWER BEFORE INSTALLING,REMOVING OR INSPECTING.WARNING:ALL WIRING TO BE PERFORMED IN ACCORDANCE WITH ELECTRICAL CODE AND LOCAL ELECTRICAL CODEWARNING:RISK OF FIRE.FIXTURES ARE RATED FOR USE IN 100-277Vac,50-60HZ PROTECTED CIRCUIT AND 900CRATED SUPPLY WIRE.WARNING:RISK OF CUT.THE ENCLOSED PRODUCT MAY HAVE SHARP EDGES,WEAR GLOVES TO PREVENT CUTS WHEN HANDING,REMOVING,INSTALLING AND MAINTAINING THIS PRODUCT.

Specification

7www.pla�numled-usa.com |

8

Packaging:

Model No. PCS/CTN GW/CTN Size

ML-T8503F 25PCS 10KGS 124*21*28CM

MC-T8603F-15X 25PCS 8.5KGS 124*21*28CM

Specification


AC Series

150940150918150869(18W)

4FT

LED

T8 T

UBES

Specifications

Due to continuous product improvement, information in this document is subject to change.

1939 Parker Ct, Stone Mountain, GA 30087 | Phone: (866) 786-1117 | www.beyondledtechnology.com

Others

Fixture Specifications

Indoor Lighting

Warranty & Qualification

WARRANTY UL DLC

5 Year Limited Yes Yes

CONSUMPTION 18W

INPUT VOLTAGE 100 - 277Vac, 50/60Hz

VIEWING ANGLE 150°

POWER FACTOR

LED BRAND EPISTAR / San'an

LED TYPE SMD2835

LED QTY 120 PCS

HOUSING Aluminum

COVER PC

OPERATINGTEMPRATURE

APPLICATION CONNECTORS CRI DIMMABLE

-4°F TO 1 °F Indoor G13 >80 No

AC Series

SKU # Model # Watts Lumens LengthCCT Lens Power Certifications

150940 BLT-T8-4TYB-18W-SDMF 18W 2250Lm 5000K

5000K

4’ Frosted Type B 1 End UL & DLC

150918 BLT-T8-4TYB-18W-SNCF 18W 2340Lm 4000K 4’ Clear Type B 2 End UL & DLC

150869 BLT-T8-4TYB-18W-SDCF 18W 2340Lm 4’ Clear Type B 2 End UL & DLC

CORRELATEDCOLOR TEMPERATURE

(CCT)

Indoor Lighting4F

T LE

D T8

TUB

ES BOX TYPE SIZE QTY / CARTON WEIGHT / CARTON

Single 49” x 10.2” x 8.8” 25 Pcs 17 lbs

Due to continuous product improvement, information in this document is subject to change.

1939 Parker Ct, Stone Mountain, GA 30087 | Phone: (866) 786-1117 | www.beyondledtechnology.com

49”7”

7”

AC Series

AC Series

NOTHINGBUT LEDS

2725 Mountain Industrial Blvd.Tucker, GA 30084nothingbutleds.com1-800-414-8919

3

LED 4ft T8 Tubes

Nothing But LED's AC Series LED T8 Tubes reduce operational costs, lower maintenance costs, and are an easy retrofit. The power factor is greater than .90 with a beam angle of 150°. Furthermore, our AC Series has an efficiency up to 120 lumens per watt, direct power with an internal driver, and an aluminum housing with a PC cover.

• Reduced operational costs.

• Lower maintenance costs.

• Efficiency up 120 lumens per watt.

• Direct Power with internal driver.

Description

AC Series

47.2”47.7”

Application Indoor

Lifespan > 80,000 Hours

Input Voltage 100-277 Vac

Warranty 5 Years

SKU # Model # Watts Lumens CCT Length Cover Power Certifications

786552 ZS-T8F1218T 22W 18800Lm 6500K 4’ Clear 2 End UL, cUL, & DLC



786555 ZS-T8F1222R 22W 18800Lm 5000K 4’ Frosted 1 End UL, cUL, & DLC

4FT LED tube specification LEDview...LED 4ft T8 Tubes Nothing But LED's AC Series LED T8 Tubes...

Documents

Transcript of 4FT LED tube specification LEDview...LED 4ft T8 Tubes Nothing But LED's AC Series LED T8 Tubes...