1)

WACS1620LM FILTER Clean-Up

1. IntroductionThe aim of this document is to describe the procedure to follow to clean-up the filter.

2. Filter Clean-up

1. Unscrew and remove the filter located under the FAN unit as per the picture below :

Unscrew to remote the filter

2. Remove the filter as per the picture below :

Remove the filter3. Clean-up of the filter in a dedicated area (Example : Outside) using two methods :3.1 Using a dry dedusting (air duster) as per the picture below :

3.2 Using a brush as per the picture below :

4. When the filter is cleaned, re-insert the filter and screw it under the FAN unit.