1620LM Filter Clean-up
3
WACS 1620LM FILTER Clean-Up 1. Introduction The aim of this document is to describe the procedure to follow to clean-up the filter. 2. Filter Clean-up 1. Unscrew and remove the filter located under the FAN unit as per the picture below : Unscrew to remote the filter 2. Remove the filter as per the picture below :
-
Upload
peter-rampete -
Category
Documents
-
view
7 -
download
1
description
Filter clean up
Transcript of 1620LM Filter Clean-up
1)
WACS1620LM FILTER Clean-Up
1. IntroductionThe aim of this document is to describe the procedure to follow to clean-up the filter.
2. Filter Clean-up
1. Unscrew and remove the filter located under the FAN unit as per the picture below :
Unscrew to remote the filter
2. Remove the filter as per the picture below :
Remove the filter3. Clean-up of the filter in a dedicated area (Example : Outside) using two methods :3.1 Using a dry dedusting (air duster) as per the picture below :
3.2 Using a brush as per the picture below :
4. When the filter is cleaned, re-insert the filter and screw it under the FAN unit.