Languages
Pages
Legal
Explore all categories to find your favorite topic
MicrostructureMechanical Property Relationships of Submerged Arc Welds in HSLA 80 Steel Submerged arc welds made at various energy inputs are evaluated in terms of microstructure…
Prediction of Austenitic Weld Metal Microstructure and Properties With advent of new stainless steels, a wider range of alloys must be considered in predicting ferrite BY…
280-s AUGUST 1999 R E S E A R C H D E V E L O P M E N T R E S E A R C H D E V E L O P M E N T R E S E A R C H D E V E L O P M E N T R E S E A R C H D E V E L O P M E N T…
Introduction With the development of a weld composition that demonstrates abili- ties to mitigate ductility dip cracking (DDC) and hot cracking in high-nickel alloys while…
Solidification Behavior and Cracking Susceptibility of Pulsed-Laser Welds in Austenitic Stainless Steels A shift in solidification behavior under rapid solidification conditions…
Intergranular Attack in Welded Stress-Corrosion Resistant Stainless Steels Satisfactory stress corrosion resistance is obtained using arc welding and, depending on the base…
How Yield Strength and Fracture Toughness Considerations Can Influence Fatigue Design Procedures for Structural Steels The Kc cfys ratio provides significant information…
Introduction Over the years, 13% Cr steel has been widely accepted in the oil country tubular goods (OCTG) segment because of its good corrosion resistance. The use of 13%…
The Solidification and Welding Metallurgy of Galling-Resistant Stainless Steels The autogenous welding response of common galling-resistant stainless steels are evaluated…
Tensile Properties of HY80 Steel Welds Containing Defects Correlated With Ultrasonic And Radiographic Evaluation Defects intentionally induced in submarine were evaluated…
Ferrite Determination in Stainless Steel Welds Advances since 1 974 Developments over the last 20 years have extended Ferrite Number determinations to duplex ferritic-austenitic…
Prediction and Measurement of Residual Elastic Strain Distributions in Gas Tungsten Arc Welds Numerical modeling holds promise for stress prediction, but further studies…
WELDING RESEARCH NOVEMBER 2006-s252 ABSTRACT. An explosive welding proce- dure for joining 9.5-mm-thick niobium plate to 203-mm-thick 6061-T651 Al plate has been developed…
Weldability of High-Strength, Low-Expansion Superalloys Weld solidification and HAZ liquation cracking in 900-series superalloys are related to Nb and Si levels BY S. C.…
Fusion Welding of Titanium-Tungsten and Titanium-Graphite Composites Reaction products at the reinforcing filament-metal matrix interface are directly related to welding…
Introduction In Canada alone, wear is estimated to cost $2.5 billion a year Ref. 1. To cut down on the cost of wear, hardfacing is employed. Fe-Cr-C hardfacing is a sur-…
Significant Features of High-Strength Steel Weld Metal Microstructures Optimal combinations of microstructure and mechanical properties are identified for high-strength steel…
APRIL 2014 VOL 93124-s W E L D IN G R E S E A R C H Introduction For the high-quality stainless steel pipe welds required for power plants petro- chemical facilities pharmaceutical…
Dye Penetrant Indications Caused by Superficial Surface Defects in 2014 Aluminum Alloy Welds Many dye penetrant indications are superficial less than 0007 in deep and can…
Introduction Offshore development has acceler- ated in recent years owing to the fact that more than 50% of undeveloped petroleum deposits are located under the ocean In…