SUPPLYING QUALITY PARTS TO THE FUNERAL...

SUPPLYING QUALITY PARTS TO THE FUNERAL INDUSTRY SINCE 1987

(800) 362-6224 / www.infparts.com 3745 Evergreen Street, Strafford MO, 65757 / Fax: (417) 863-0320

Call (800) 362-6224 or visit www.infparts.com for more!2

INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ CAS

KET R

OLLE

R PL

ATES

& S

LIDER

S CASKET ROLLER PLATES & SLIDERS

R oller frame assem-blies for hearse

rear compartments allow caskets to roll effortlessly in and out of the vehicle.

All of our Casket rollers are made with Heavy Duty Chrome Plating to withstand heavy usage. The rubber roller inserts are made to last and not peel. The material used is a mix-ture of different rubbers tested to ensure that Casket rollers hold up and do not separate.

Single Casket ROLLER FRAME ASSEMBLY (FC1000) • 11-1/4” L (corner to corner) 11-3/4” at longest point x 3-3/4” W• Installs with 4 screws

90 Degree Right Angle Casket ROLLER FRAME ASSEMBLY (FC1010) • Angled at 90 degrees to be used at the opening of rear compartment• Installs with 4 screws• 11-1/2” L x 2-1/2” W x 1-9/16” T

END VIEW COMPARISON

COMPETITOR BRAND INFINITE BRAND

3Call (800) 362-6224 or visit www.infparts.com for more!

INFINITE HEARSE PARTS & ACCESSORIES / BIER PIN PLATESBIER PIN PLATES

T hese heavy duty chrome plated plates will give you the peace of mind of making sure

that your cargo is secure and safe when used with a bier pin assembly to hold casket stationary.

Casket SKID PLATE (FC1030) Designed to help move your cargo forward without hangups and snags. The ends of the slides have rounded radius corners to make it easy for the movement of entering and exit-ing your cargo. Holds up against fric-tion caused by constant movement of the casket. Installs by snapping into place. Attractive chrome finish (11” L x 1-11/16” W x 3/4” T)

8 Hole Hex BIER PIN PLATE (FC1020)• Attractive chrome finish• 8’ x 5/8” hex shaped holes for adjustable lengths• 17” L x 2” W• 1-3/8” space between holes• Installs with 4 screws

4 Hole Hex BIER PIN PLATE (FC1025)• Attractive chrome finish• 4 x 5/8” hex shaped holes for adjustable lengths• 9-1/4” L x 2” W x 1” T• 1-3/8” space between holes• Installs with 2 screws

SOCKET STORAGE BIER PIN SINGLE (FC1050)• Stores 1 hex style bier pin while not in use• Installs on side of rear compartment or ease of access• Attractive chrome finish• 1/2” dia. hexagon socket

BIER PIN HEX STOP for Pull Out Tables (FC1055)• Secures rear compartment pull out table when not in use• Installs into hex style hole in sill plate area• Attractive chrome finish• 2-1/2” L x 1” dia. pin with 1”L x 1/2” dia. hexagon


INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ BIER

PIN

S BIER PINS

O ur hex style bier pin assemblies insert into hex style bier pin plates, gently holding a casket in place with a soft rubber pad that

will not damage or scratch the casket while in motion.

Stationary Style “Casket Stop” BIER PIN ASSEMBLY (FC1045) Our hex style bier pin assemblies insert into hex style bier pin plates, gently holding a casket in place with a soft rubber pad that will not damage or scratch the casket while in motion. Both feature Heavy duty Chrome plating stands up to heavy usage without chipping.

• Attractive chrome finish• Pad Size: 5-3/4” L x 3” W soft rubber material that won’t damage or scratch casket• Size: 4” L bier pin with 1” L x 1/2” diameter hex insert

(FC1045)

(FC1040)

Quick Release Adjustable Style BIER PIN HEX ASSEMBLY (FC1040) • New easy grip ergonomic handle allows you to adjust the pad as needed• Bier Pin has double threaded technology which means for every turn of the style knob, you are moving twice the distance to help speed up the loosening and tightening of the bier pin• Easy push button adjusts end plate quickly against the casket• Pin fits firmly into plate with added Nylon washer for a more secure fit with no rattle


INFINITE HEARSE PARTS & ACCESSORIES / BUMPER PROTECTORSBUMPER PROTECTORS

C askets can take their toll on your bumpers. Investing in a heavy duty bumper protector ensures that your bumper will be protected from

dings and scratches.

2006-2011 S & S and Superior Cadillac BUMPER PROTECTOR(Specific fit for 2006-2011 S & S and Superior Cadillac DTS Hearses)• Various colors available: Black, Blue, Neutral and Titanium (Pictured in Neutral)• Material: Heavy Duty vinyl with automotive grade carpet material• Fits under casket rollers• Size: 42” L x 21” T(A1124373)

• Various colors available: Black, Blue, Neutral and Titanium (Both Pictured in Black)• Can be altered to install any way end user prefers• Installation hardware not included

UNIVERSAL PROTECTOR with Automotive Grade-Carpet Material (Universal Fit) (FC3000) Size: 39” L x 22-1/2” T UNIVERSAL PROTECTOR with Heavy Duty Vinyl with Automotive Grade Carpet Material(Universal Fit) (A1124376) Size: 41-1/4”L x 24” T

(FC3000)

(A1124376)

Universal Bumper Protectors

See all of our products on www.infparts.com!


INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ SED

AN &

LIMO

USIN

E BUM

PER

PROT

ECTO

RS SEDAN & LIMOUSINE BUMPER PROTECTORS

P rotect your bumper from damage from repeated loading and unload-

ing of ceremony supplies and flowers. These lightweight Bumper protector bibs are easily installed and simple to use.

2000-2011 Cadillac DeVille/ DTS BUMPER BIB (CHA1505) Installs with Velcro to trunk interior

2012-Current Ford MKT BUMPER BIB(CHA1515) Installs by sliding beneath spare tire tongue

Color: Black Material: Lightweight Trunk Material

2013-Current Cadillac XTS BUMPER BIB(CHA1508) Installs with Velcro to trunk interior

1990-2011 Lincoln TOWN CAR BUMPER BIB (CHA1500/CHA1510/CHA1499)Installs with Velcro to trunk interior

Vehicle specific fit options: 1990-1997, 1998-2002 or 2003-2011 Lincoln Town Cars

We are the Service Parts Provider for S & S and Superior Coaches! See All Our Parts & Accessories on www.infparts.com!


INFINITE HEARSE PARTS & ACCESSORIES / FLAGSTAFFSFLAGSTAFFS

USA FLAG FOR FLAG STAFFS U.S. Flag

8-1/2” H x 12” W(CHA4014)

U.S. Flag6” H x 12” W

(FC1097)

O ur heavy duty stainless flagstaff is easily removable and installs in seconds. Staff is quickly removed with

a simple twist and pull action, so that you can remove or change your flag instantly. Comes with clip for securing flag.

12” Flagstaff (FC1090) 18” Flagstaff (FC1095)

Flagstaffs

Funeral Flags

Note: Mounting brackets are not included with staffs. Vehicle specific mounting kits available which include a flagstaff and US flag.

Orange/White Funeral Flag 12” W x 6” H (FC1096)

Purple/White Funeral Flag 12” W x 6” H (FC1098)

Orange/Black Funeral Flag 12” W x 6” H (FC1099)

Display the American Flag proudly on your vehicles!


INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ FLA

GSTA

FF K

ITS FLAGSTAFF KITS

2013-Current Cadillac XTS Right/Passenger (CHA4000) Left/Driver (CHA4001)

2006-2011 Cadillac DTS Side Universal (CHA4017)

2000-2005 Cadillac Deville Right/Passenger (CHA4006) Left/Driver, Front Fitting Style (CHA4007)

2011-Current Lincoln MKT Right/Passenger (CHA4002)Left/Driver (CHA4003)

2003-2011 Lincoln Town Car Right/Passenger (CHA4016R)Left/Driver (CHA4016L)

2007-2013 Cadillac Escalade/Chevy Suburban Right/Passenger (CHA4020R)Left/Driver (CHA4020L)

2010-Current Mercedes Sprinter VanRight/Passenger (CHA4030R)Left/Driver (CHA4030L)

Made from strong and durable stainless steel, this attractive flagstaff mounts simply and securely.

The mounting bracket installs with one or two bolts, and can use stock bolt locations (no drill-ing) on many vehicles. The flag and staff assembly conveniently attaches or detaches with a sim-ple press-and-turn motion. The unique staff design makes flag removal simple, and can accom-modate flags up to 8-3/4” tall. The kit comes with a 12” staff, U.S. flag, a flag securing clip and includes all the hardware and bracket needed for installation.

Staff is simple to remove with Push

and Twist Motion to unlock.

We are the Service Parts Provider for S & S and

Superior Coaches!


INFINITE HEARSE PARTS & ACCESSORIES / HEATING & COOLING SYSTEMSAUTOMOTIVE HEATING & COOLING SYSTEMS

F eaturing a compact and durable, premium ABS case that is designed for saving space, ideal for standard stretches. Moves more air with

higher BTU/CFM than the competitor’s same size of unit!

• 450 CFM @ 13 VDC, 10 amp• 20,000 BTU Cool/ 22,000 BTU Heat• A/C Connections: #12 MIO male fitting and #10 female O-ring nut into expansion valve with #6 male O-ring connection• Heat Connections: Includes x 2 x 5/8”hose connections• Includes 4 x 2-1/2” blower outlets• Size: 15-3/4” L x 13-1/2” W x 5-1/2” H• Includes wiring harness, expansion valve and mounting brackets• Manufactured in the USA

• 605 CFM @ 13.5 VDC, 14 amp• 23,600 BTU Cool/26,000 BTU Heat• A/C Connections: #12 MIO male fitting and #10 female O-ring nut into expansion valve with #6 male O-ring connection• Heat Connections: Includes x 2 x 5/8” hose connections• Includes 4 x 2-1/2” blower outlets• Size: 17-1/2” L x 15-1/2” W x 7” H• Includes wiring harness, expansion valve and mounting brackets• Manufactured in the USA

MaxAir 1 COOL/HEAT UNIT (ACUNI001)



INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ HEA

TING

& CO

OLIN

G SY

STEM

S AUTOMOTIVE HEATING & COOLING SYSTEMS

Replacement Dual-Shaft BLOWER ASSEMBLY

Operates as variable or 3-speed option.Fits Max-Air 3,Turbo and

Vortex//637 CFM (ACBLW002)

Replacement Single-Shaft BLOWER ASSEMBLY Will operate as variable

or 3-speed option. Fits Turbo, Vortex

and X-Treme/CFM 300 (AC3010)

Small Dual-Shaft BLOWER ASSEMBLY

(ACMTR015) Fits X-Press/407 CFM (ACMTR001) Fits Max-Air 1/478 CFM

Keep Your CustomersMore Comfortable!

Manufactured in the USA!

• 860 CFM @ 13 VDC, 18 amps• 32,000 BTU Cool/ 30,000 BTU Heat• A/C Connections: #12 MIO male fitting and #10 female O-ring nut into expansion value with #6 male O-ring connection• Heat Connections: Includes x 2 x 5/8” hose connections• Vent hose adapters available in 2 or 4 x 2-1/2” outlets


We Carry Fittings on Our Website,

www.infparts.com!

• Size: 16”L x 14.5”W x 6.5” T (Case height) • 9.5” T (with blower outlet height included)• Includes wiring harness, expansion valve and mounting brackets• Manufactured in the USA


HEAT AC UNIT REPLACEMENT PARTS

Chrome Round VENT CHROME BALL LOUVER

W/HOSE ADAPTER (AC8061)

with 2” Adapter (AC8061.5)

with 2-1/2” Adapter (Pictured)

Black ROUND VENT BLACK LOUVER

W/HOSE ADAPTER (AC8060)

with 2” Adapter (Pictured) (AC8060.5)

with 2-1/2” Adapter

Three Speed BLOWER MOTOR

Most universal. Produces the highest torque and

speed rating for its class. Size: 3” Dia. motor with

5/16” shaft. 2-3/4” shaft length. (AC1004)

Single Shaft Blower Motor

12 volt, single shaft motor. Permanent magnet,

single speed, reversible rotation. Size: 3” Dia. 1-1/4”

shaft length and 1/2” extended threaded studs.

(AC1060)

Rectangle VENT LOUVER(AC8085)• Rectangular shape• Color: Black• Size: 5.75” L x 2.21”T • Accommodates 2.5” duct hose• Used in Accubuilt, Eagle and Federal vehicles

Drier/Filter/Receiver Used inline for the ad-

ditional air conditioning system. Features top

sight glass. Size: 2-1/2” Dia. x 8” T #6 male insert o-ring fittings. (AC1080)

Refrigerant Solenoid VALVE

A remote 12 volt Freon solenoid valve for air conditioning system. Size: #6 male insert

o-ring fittings. (AC1008)

Return AIR VENTSize: 12-1/4” x 5-1/2” (AC1040)Size: 12-1/4” x 2-3/4” (AC1042)

We are the Service Parts Provider for S & S and Superior Coaches!


INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ HEA

T A/C

UNI

T REP

LACE

MENT

PAR

TS HEAT AC UNIT REPLACEMENT PARTS

Electric Vacuum SWITCH Remote electric vacuum switch is used to activate your heating system water

valve. Normally closed, 12 volt DC. (AC1012)

Vacuum Controlled WATER VALVE Vacuum controlled on/off water valve for heating system. Normally closed, vacuum

opens. Size: 5/8” hose connections. (AC1013)

3 Ports Right

3 PortsRight1 Port Left 2 Ports Left

Fluid DIVERTER VALVESVacuum operated, bypass water valve allows front and rear heater to oper-ate in series. Size: 5/8” hose connections.

Vacuum Controlled WATER VALVEVacuum controlled on/off water valve for heating system. Normally closed,

vacuum opens. Size: 5/8” hose connections. (ACHDW120)

Expansion VALVE Adjustable expansion valve. Internally

equalized 5 superheat setting. 1-1/2 ton capacity. Size: 8” cap tube length. #6

& #8 male o-ring fittings. (AC1007)

Flexible DUCT HOSE Size: 2” Diameter (AC1023)Size: 2-1/2” Diameter (AC1024)

(AC1019) (AC1025)

We Carry Fittings on Our Website,

www.infparts.com!


INFINITE HEARSE PARTS & ACCESSORIES / HEAT A/C UNIT REPLACEMENT PARTSHEAT AC UNIT REPLACEMENT PARTS

Pusher CONDENSER FAN9” Pusher (AC0996)

12” Pusher (AC1003) 13” Pusher* (AC100313) 14” Pusher* (AC100314)

16” Pusher (AC0980) * With 90-Degree Mounts

Puller CONDENSER FAN 11” Puller (AC0985) 13” Puller (AC0989)14” Puller (AC0970) 16” Puller (AC0982)

14” x 21-3/4” Radiator CONDENSER Specifications:• Condenser Model: Parallel Flow• Core Size: 14” H x 21-3/4” L x 1-1/4” D• Inlet Fitting: O-ring #8 (5/16”)• Outlet Fitting: O-ring #6 (13/32”)• Passes: 4• Material: Aluminum(AC0300772)

Note: Additional sizes of condensers and condensers with fans installed are avail-able. Please ask your customer service representative for details.

16” x 24” Radiator-Mount CONDENSER (AC0981)Specifications:• Condenser Model: Parallel Flow• Core Size: 16” H x 24” L x .79” D• Inlet Fitting: O-ring #8 (5/16”)• Outlet Fitting: O-ring #6 (13/32”• Passes: 4• Material: Aluminum

Cooling Fan TIE KIT

Tie kit allows you to mount the cooling fan

with ease directly onto the condenser.

(AC0997)

Fan Mounting CLIP (AC1003C)

Fan Condenser ASSEMBLY (AC09950)Specifications:• Efficient parallel flow-coil design rated at 20,000 BTUs• Dual 9” curved blade pusher fans producing 1,200 CFM• Compact Size: 11” H x 21-1/2” L x 3” D• #8 MIO inlet and #6 MIO outlet• Includes weatherproof fan connections


INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ LIG

HTIN

G LIGHTING

OPERA LAMP Housing (A1141454)Replacement chrome opera lamp housing with two lens. Used on Eureka Coach vehicles. Installs by mounting with screws to vehicle.

OPERA LAMP HousingReplacement chrome opera lamp

housing with 3 lens. Used on S&S Coach vehicles. Installs by

mounting with screws to vehicle.(A511403)

400 Series Model LED COACH LIGHT (400)Extensive research and development has made our lights the most reliable coach lights available. Features LED technology with a high quality LED that illuminates an acrylic fiber rod that evenly distributes a crisp white light and set in an attractive chrome plated bezel. No bulbs to change!

Curved to fit the radius of the upper pillar area of most modern vehicles. A popular choice for upgrading to LED lights since it often uses the same drilling holes as our previous models. Also offered with an adapter gasket to seal any gaps. Made in the USA with the highest quality components and materials.

Bulbs and Hardware Not Included.

Sold Individually.

More Models Available Online!

Back Up LIGHT (A2146558)(Back up light replacement for hearse bumperette)• Used on 2006-2011 Superior and S&S vehicles• 12V, 2-wire hookup• Clear lens• Wide beam• 55 watts

Note: The 400 series is a simple 2-wire hookup light (wires extend from the back) and power into wherever 12V power is present. Comes with the mounting hardware.


INFINITE HEARSE PARTS & ACCESSORIES / LIGHTINGLIGHTING

White 3 LED INTERIOR LIGHT (ELP2299) / (ELP2297)* *[Optional Chrome Bezel]

Featuring a special lens that is designed to reflect and create more light, giving you optimal illumination.

Size: 2-3/4” Dia. x 1/4” D

Round Chrome LED INTERIOR LIGHT (ICL5002)This stylish light, with chrome bezel, will give your interior a neon-like glow with its four (4) white LED. Size: 3” Dia. x 1” D

Black Round LED Interior Light (ICL5001)This stylish light, with chrome bezel,

will give your interior a neon-like glow with its four (4) super bright LEDs.

White 4 LED COURTESY LIGHT with Black Bezel (ELP1956)Specifications:• Surface mount courtesy light is great for accent lighting. • Contains 4 white LEDs• Size: 1-1/2” L x 13/16” W x 1/2” T

White LED ACCENT LIGHT STRIP White LED Ribbon light strips are flexible and extremely slim fitting while emitting a powerful white light. Ideal for accent lighting in a variety of areas. Size: 6” strip length(ELP475LED)


INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ FEN

DER

TRIM

& C

OT R

ESTR

AINT

S FENDER TRIM

COT RESTRAINTS

C hrome accessories can be a great way of providing a classy contrast to your vehicle. Sold as a set.

2013-2018 CADILLAC XTS (IWFT9343)

2010-2017 XTS LINCOLN MKT (6 piece) (IWFT9310)

2007-2014 CADILLAC ESCALADE Fender Trim (IWFT9401)

2007-2013 CADILLAC ESCALADE ESV/CHEVY SUBURBAN/AVALANCHE Fender Trim (IWFT9402)

2000-2011 CADILLAC DEVILLE/ DTS Fender Trim (IWFT9340)

2000-2011 CADILLAC DEVILLE/DTS FENDER TRIM (Long Style) (IWFT9341)

1998-2002 LINCOLN TOWN CAR Fender Trim (IWFT9380)

1995-1997 LINCOLN TOWN CAR Fender Trim (IWFT9360)

1990-1994 LINCOLN TOWN CAR Fender Trim (WFT9370)

COT RESTRAINTS• 2 piece cot restraint • 2” nylon webbing• Quick release push button buckle• Automotive type metal buckles

74” Length (Black) (IAL0021)90” Length (Black) (IAL0018)


INFINITE HEARSE PARTS & ACCESSORIES / STAINLESS KITSSTAINLESS KITS

2000-2011 Cadillac DTS/DeVille 6-Door Limousine 41” Stretch On-the-Door Lower Rocker Stainless Kit (#10 pieces) (WLK4100)

2000-2011 Cadillac DTS/DeVille 6-Door Limousine 47” Stretch On-the-Door Lower Rocker Stainless Kit (#10 pieces) (WLK4600)

2000-2011 2000-2011 Cadillac DTS/DeVille 48” Hearse On-the-Door Lower Rocker Stainless Kit (#8 pieces) (WLK4800)

2000-2011 Cadillac DTS/DeVille Limousine 65” Stretch Below-the- Door Lower Rocker Stainless Kit (#6 pieces) (A12416807)

A12416807

WLK4600 / WLK4800 / WLK4100


INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ ACC

ESSO

RIES ACCESSORIES

Note: Infinite carries a variety of different fitting

heavy duty Sill Plate/Scuff Pads for Hearse

casket entry area.

Call us at (800) 362-6224

for more info and product availability!

I nfinite has the ability to create custom-ized curtains based on your supplied pat-

tern. We use a high grade automotive cloth that is flame retardant and meets FMVSS requirements in a variety of colors.

Sill Plates & Scuff Pads

Hearse Custom Drapes

UPGRADE YOUR DRAPES WITH A CUSTOM MADE SET BY INFINITE!

Call us at (800) 362-6224 for more details on how to order new custom curtains!


INFINITE HEARSE PARTS & ACCESSORIES / ACCESSORIESACCESSORIES

Staff UMBRELLA (CHA0200)Keep the family members dry with the most durable, dependable umbrella in the rain. Shade the grieving family from the heat and sun in the warmest weather. Either way, make sure your staff is prepared for both extremes with our all black 60” diameter umbrella. With six-door limos, staff should be pre-pared with several umbrellas.

Features:• 60” diameter• Auto open with push button release• Push release button for easy retracting• Fiberglass shaft• Ribbed wooden handle and black nylon panels• Storage sleeve with shoulder carrying strap • 39-1/2” length when stored

Back Up SENSOR KIT (A11414905)Avoid the costly damage of backing into something with a Back-Up Sensor Kit. This 12V kit contains four sensors that alert you when backing vehicle too close to any surface.

Features:• Universal fit• 4 Sensors

Note: Kit contains module, sensors, speaker, wiring and installation hardware


INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ REP

LACE

MENT

PAR

TS REPLACEMENT PARTS

LANDAU BAR BUTTON (A1148161) Attractive chrome plated button

for securing landau bars to vehicle. Screws into end of bar, 2 buttons

per bar. (Sold Individually)

Fleur-de-Lis EMBLEM (A11412703) Replacement chrome Fleur-de-Lis emblem. Installs with double-sided tape. (Sold Individually)

Wreath EMBLEM (A850770) Replacement chrome wreath

emblem. Installs with double-sided tape. (Sold Individually)

LANDAU BAR (FC2000/FC2001) Decorative landau bar scrolls for hearse exterior. Right and left side specific.• 53” length Chrome plated• Vehicle universal

Decorative Emblems

Landau Bars

Secures to Vehicle with Landau Button. Sold Individually


INFINITE HEARSE PARTS & ACCESSORIES / REPLACEMENT PARTSREPLACEMENT PARTS

Replacement Back DOOR SPRING (A221012)Replacement rear back door hinge spring. Pop-ularly used in Accubuilt models from 2000-2011.

3-Point Retractable SEAT BELTS Meets all FMVSS requirements. Consists of a lap belt and buckle, shoulder strap and third point attachment. (IAL0030 Black / IAL0040 Blue)

LAP BELTS 62” Length (Blue) (IAL0060)74” Length (Black) (IAL0021)74” Length (Blue) (IAL0022)90” Length (Black) (IAL0018)

[With Retractor] (Black) (IAL0090)[With Retractor] (Blue) (IAL0085)

Replacement WINDOW REGULATOR 2006-2011 Cadillac DTS front door after-market regulator assembly. Right and left

specific. Popular replacement for center door in 6-door DTS limousines.

(C061870/C061871)

Emergency Brake CABLE EXTENSIONSEmergency brake cable extension

replacement for limos and hearses.

Call (800) 362-6224 for details!

Vehicle specific cables

AVAILABLE IN MULTIPLE SIZES!


INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ BOD

Y PA

RTS

XTS Hearse 1 Rear Surround Assembly2 Drip Rail Molding3 Vinyl Top Material4 Reveal Moldings5 Body Side Moldings6 Window Glass & Weatherstripping7 Belt Moldings

Construction Parts, Center Doors

& Hardware & More Available!

XTS 6-Door Limousine 1 Applique Moldings2 Reveal Moldings3 Belt Moldings4 Body Side Moldings5 Window Glass & Weatherstripping

1 32

54

4

56

2

7

1

3

Back Loading Door Parts,

Construction Parts,Door Hardware

& More Available!

BODY PARTS


INFINITE HEARSE PARTS & ACCESSORIES / HEATING & COOLING SYSTEMS

Lincoln MKT Hearse 1 Back Loading Door Parts2 Rear Surround Assembly3 Vinyl Top Material4 Reveal Moldings5 Belt Moldings6 Window Glass & Weatherstripping7 Body Side Moldings

Center Doors,Construction Parts, & More Available!

Lincoln MKT Limousine 1 Reveal Moldings2 Belt Moldings3 Body-Clad Brite Moldings4 Window Glass & Weatherstripping

Center Doors,Construction Parts, & More Available!

2

34

1

4

765

1

2

3

BODY PARTS


INFI

NITE

HEA

RSE

PART

S &

ACCE

SSOR

IES

/ BOD

Y PA

RTS BODY PARTS

2

4 53

1

DTS Hearse 1 Vinyl Top Material2 Rear Surround Assembly 3 Belt Moldings4 Window Glass & Weatherstripping5 Body Side Moldings

Construction Parts, Center Doors

& More Available!

DTS Limousine 1 Reveal Moldings2 Vinyl Top Material3 Belt Moldings4 Window Glass & Weatherstripping5 Body Side Moldings

Construction Parts, Door Hardware,

Back Loading Door Parts, Windshields

& More Available!

2

34

1

5


INFINITE HEARSE PARTS & ACCESSORIES / BODY PARTSBODY PARTS

3

5 64

1 2

2

3

4 5

1

Construction Parts, Door Hardware, Coil Springs,

Dual Alternators, Mounting Kits & More Available!

Lincoln Town Car 1 Reveal Moldings2 Vinyl Top Material 3 Body Side Moldings4 Window Glass & Weatherstripping5 Belt Moldings

Construction Parts, Door Hardware, Back Loading Door

Parts, Windshields & More Available!

Lincoln Town Car Hearse 1 Reveal Moldings 2 Vinyl Top Material3 Rear Surround Assembly4 Body Side Moldings5 Window Glass & Weatherstripping6 Belt Moldings


NOTES

SUPP

LYIN

G QU

ALITY

PAR

TS TO

THE F

UNER

AL IN

DUST

RY S

INCE

198

7

3745

Eve

rgre

en S

tree

tSt

raff

ord

MO

, 657

57(4

17)

863-

0300

(800

) 36

2-62

24F

ax: (

417)

863

-032

0

SUPPLYING QUALITY PARTS TO THE FUNERAL...

Documents

Transcript of SUPPLYING QUALITY PARTS TO THE FUNERAL...