MRO MACHINERYC A T A L O G 2 0 1 7

Air Filtration

Bandsaws

Belt Grinders

Bevelers

Cold Saws

Cut-Off Saws

Drill Presses

Ironworkers

Heavy Duty Industry Solutions

Call Purity Cylinder Gases for more information 1-888-532-2375

Prices subject to change. Good thru 12/31/2017 or while supplies last!

Locally Owned and Operated Since 1938

2

BA

ND

SA

WS

Wellsaw Scissor Type Band SawWLS 1318, $7,400

• Cut round 13”, rectangular 13” x 18”• Variable speed 70-375 SFPM• Carbide guides • Wet cutting system• Variable hydraulic feed rate control• Quick acting vice• Auto shut-off at end of cut

Wellsaw Semi-auto Band SawWLS 1318SA, $12,970

• PLC controlled full cycle semi-auto• Cut 13” round, 13”x18” rectangular• Variable hydraulic feed control• Carbide roller guides• Variable speed 70-375 SFPM• Wet cutting system• Quick acting vise• Auto shut-off at end of cut• Swivel vise to 45 deg.

Horizontal BandsawsDKE 983100 DKE 983101

SE712, $1,750 SE912, $2,750 7x12 Cut Capacity 9x12 Cut Capacity• Medium duty • Hydraulic control• Accurate cutting • Chip brush blade cleaner• Rugged Gear box • Wet or dry cutting

Horizontal Twin-Post Band SawWLS W-9-1, $10,950

• PLC controlled full cycle semi-auto• Cut 9” round, 9”x18” rectangular• Variable hydraulic feed control• Carbide roller guides• Variable speed 70-380 SFPM• Wet cutting system• Manual vise• Auto shut-off at end of cut• Swivel vise to 45 deg.

Purity Cylinder Gases can help you with all of your MRO Machinery needs! Call us today! 1-888-532-2375

Locally Owned and Operated Since 1938

3Prices subject to change. Good thru 12/31/2017 or while supplies last!

MEA

SU

REM

EN

T SYSTE

MS

For Band Saws, Cold Saws, Iron Workers, and More!

Saw Gear - Programable Stop System

Advanced Measuring Systems - AMS

Tiger Stop - Measurement/Feed SystemIf you need to increase your production, decrease set-up time, reduce operator error and eliminate scrap...Scotchman Advanced Feed System is the answer for you!

• Fast Simply move the stop to the correct setting and let go. The gauge aligns itself to the dimension you selected. It’s as easy as picking up & pressing down the Multi-Loc or sliding the Quick-Loc to the setting. • Accurate Once set, the teeth guarantee the stop will never slip/move, eliminating measuring errors and waste. • Repeatable The same dimensions can be repeated again and again by different operators on different operations, even on different days.• Cost Effective The investment will be quickly returned in lower labor costs, reduced makeovers and less waste.

• Can be mounted to feed left or right

• Program multiple lengths or minimize remnant length

• Set in feet, inches, fractions, decimals, or metric

• Optional downloading from your PC

• Can be used as a feeder or a stop

• Miter capability on saw head

• Electronic zero-point calibration

• Multi-lingual

• Adjustable drive speed of 1” to 25” per second.

• Working lengths: 4’, 6’, 8’, 10’, 12’, 16’, 20’, 24’, & 30’

Call for exact specs and pricing.

Priced right, yet very rugged and simple to use. All you do is enter the length required and press go. It can be mounted to move left to right or right to left and is available in 8’,12’ and 16’ lengths only.

• Eliminates time and mistakes from pulling a tape measure, locking a stop, or marking parts. Lengths can be entered in fractions, decimal or metric.

• Program and store cut list, up to 10 lists with up to 10 moves per job.

Call for exact specs and pricing.

Working lengths:5’, 10’, 15’, 20’, 25’

Call Purity Cylinder Gases for more information 1-888-532-2375

Prices subject to change. Good thru 12/31/2017 or while supplies last!

Locally Owned and Operated Since 1938

4

CO

LD S

AW

SCPO 350ScotchmanCold Saw$6,195

• Manual Saw• Manual clamp for material vise• Operator controlled trigger switch

CPO 350 PKPD Scotchman Cold Saw, $9,395• Semi-automatic Saw• Air-operated clamp for material vise• Pneumatic power down feed with electric controls• Emergency stop button

Dimensions & SpecificationsMultiple cutting speedsMax. diameter blade, 14”Abor Bore 1-9/16”Pin Spacing 4/12/64

Dimensions & SpecificationsMultiple cutting speedsMax. diameter blade, 14”Abor Bore 1-9/16”Pin Spacing 4/12/64

CPO 350 NF PKPD Scotchman Cold Saw for Non-Ferrous Aluminum, Plastic, Copper, etc., $9,995

DKE 74029-2

Super Technics350CE Cold Saw (230/3)$6,425

SPECIFICATIONS

Maximum Blade Size 14 inches with 32 mm arbor (2/8/45mm drive pin

Minimum Blade Size 12 inches with 32 mm arbor (2/8/45mm drive pin

Spindle Speeds Variable

Min/Max Spin. RPM 20 RPM / 100 RPM

Head Feed Manual

Vise Manual, cam activated

Max. Vise Opening 6-5/8 inches

Miter Cutting Cap. Up to 45˚ left/up to 45˚ right/ 90˚ right for slot cutting

Controls CE Certified 24-volt - Handle mounted trigger switch

Horsepower 3.5 HP

Weight 650 pounds

Work /Overall Height 40 inches / 79 inches

Base Width/Depth 27 inches / 39 inches

Lubricant Flood type unit built into the machine (Mechanical)

230-volt three phase Voltage • Available 460-volt three phase (external transformer)

AMP 20-amp service for 230-volts machines • 16-amp service for 460-volt machines

Compressed Air 90 PSI with optional pneumatic vise.

Manual cold saw that will rotate to 90º for slot cutting and offers 3 different speeds. A mechanical coolant pump with flow control is included.

Dimensions & SpecificationsCutting Speeds, 3,000 rpm • Motor Rate, 5 hpMultiple wiring options • Max. diameter blade, 14”Abor Bore 1-9/16” • Pin Spacing 4/12/64 • Weight: 675 lb. • Dimensions: 21-7/8” x 43-1/2” x 56-1/4” (not incl. feed handle), 37-7/16” (from floor to vise)

Purity Cylinder Gases can help you with all of your MRO Machinery needs! Call us today! 1-888-532-2375

Locally Owned and Operated Since 1938

5Prices subject to change. Good thru 12/31/2017 or while supplies last!

IRO

N W

OR

KER

SPortafab 45 Portable Iron WorkerSingle Operator, 4-Stations 45-ton punch station (1- 1/8” in 1/2”) 4-1/2” throat depth 2” die holder Adjustable electric stroke control w/scale 3-in-1 combination tool (angle shear, bar shear, rod shear) Stand w/tooling storage 110 volt, 1-phase Three year parts warranty Made in USA

$6,390

50514-CM 50-Ton Iron WorkerSingle Operator, 5-Stations 50-ton punch station (1-1/4” in 1/2”) 6” throat depth 2” die holder Adjustable stroke control Angle shear, 4x4x3/8” at 90° 14” Flat bar shear Rectangular notcher, 2-1/2x2-3/4x3/8” 230/460 volt, 3-phase Three year parts warranty Made in USA $9,550

5014-TM 50-Ton with 3-station revolving turret Single Operator, 7-Stations 50-ton punch station (1-1/4” in 1/2”) 4” throat depth Three 2” die holders Adjustable stroke control Angle shear, 4x4x3/8” at 90° 14” Flat bar shear Rectangular notcher, 2-1/2x2-3/4x3/8” 230/460 volt, 3-phase Three year parts warranty Made in USA $12,190

D095/140-24M95 Ton Iron Worker Dual Operator, 5-Stations 95-ton punch station (1-3/16” in 1”) 9” throat depth Adjustable swing away stripper Punch jog control Angle shear, 6x6x1/2” at 90° 24” Flat bar shear Rectangular notcher, 3x4x1/2”230/460 volt, 3-phase Three year parts warranty Made in USA $26,390

Call Purity Cylinder Gases for more information 1-888-532-2375

Prices subject to change. Good thru 12/31/2017 or while supplies last!

Locally Owned and Operated Since 1938

6

DR

ILL

PR

ESSES

BENCH TOP & FLOOR MODELS:Locking handle hub

CE Safety Electrical PackageLarge Diameter Sturdy Spindle

Massive Cast head

TB-16 5/8” 1/2 Hp Bench TopDrill Press, DKE 77100, $1,050 (Shown)

• Max work dia. 14-1/8” • Max drill cap. 5/8”• Spindle travel 3-1/8” • Spindle taper MT2• Spindle speeds: 9 via 3 pulley system• Tilting, rotating swivel table with T-slot• Safety guard and interlocks

TB-16-V 5/8” Variable Speed1/2 Hp Bench Top Drill Press,

DKE 77102, $1,450(Not shown)

SB-16 5/8” Floor Stand Drill Press,DKE 77200, $1,395

• Max work dia. 14-1/8” • Max drill cap. 5/8”• Spindle travel 3-1/8” • Spindle taper MT2• Spindle speeds: 9 via 3 pulley system• Tilting, rotating swivel table with T-slot• Safety guard and interlocks

SB-25 1”, 2 Hp Floor StandDrill Press, DKE 77300, $1,995

• Max work dia. 18” • Max drill cap. 1”• Spindle travel 5” • Spindle taper MT3• Spindle speeds: 9 via 3 pulley system, 270 - 2000 rpms• Tilting, rotating swivel table with T-slot• Safety guard and interlocks

SB-25-V 1”, 2 Hp Variable Speed Floor Stand Drill PressDKE 77600-1V, $2,450

SB-32 1-1/4”, 2 Hp Floor Stand Drill PressDKE 77400, $2,550• Max work dia. 18” • Max drill cap. 1-1/4”• Spindle travel 5-1/4” • Spindle taper MT4• Spindle speeds: 9 via 3 pulley system, 270 - 2290 rpms• Tilting, rotating swivel table with T-slot• Safety guard and interlocks

Purity Cylinder Gases can help you with all of your MRO Machinery needs! Call us today! 1-888-532-2375

Locally Owned and Operated Since 1938

7Prices subject to change. Good thru 12/31/2017 or while supplies last!

BELT G

RIN

DER

S, G

RIN

DER

S &

BEN

DER

S

Model KZI S612-1Belt/Disc Sander

$2,295

• 6” Belt, 12” Disc • 3HP• 2,800 FPM

Model SCI AL100U-02Scotchman Tube & Pipe Grinder/Notcher

$6,995

• 1/3 HP, 1800SFPM • Two axis crossfeed table• 90 - 30 degree in • 4HP pipe 3/4” - 3” • 230/460-3 Phase

MODEL KZI 1SM1”X42” Belt Sander

1/3 HP, 1800 SFPM • Tilt Table

$289

MODEL 760 / BRK 701001-1/2”X60” Belt Sander

Single speed 8000 SFPM1.5 HP, 1 Phase, 120 Volt

$2,346

MODEL 760 / BRK 721101-1/2”X60” Belt SanderVariable speed 800-8000 SFPM

1.5 HP, 1 Phase, 120 Volt

$3,168

MODEL KZI 2FSM2”X48” Belt Sander

1/2 HP, 4500 SFPM • Tilt TableRemovable Platen

$449

MODEL x400 / BRK 248202”X48” Belt Sander

1 HP, 8000 SFPM Pivoting Belt Head

$1,563

Prices subject to change. Good thru 12/31/2017 or while supplies last! Not all items stocked at every location.

Family Owned & Locally OperatedSince 1938

Grand Rapids(616) 532-23751-888-532-2375 www.puritygas.com

Angola, IN(260) 665-7241Battle Creek, MI(269) 660-1907Cadillac, MI(231) 779-2468Elkhart, IN(574) 389-8760

Fort Wayne, IN(260) 497-7565Holland, MI (616) 848-7650Kalamazoo, MI(269) 344-0518Lansing, MI(517) 321-9555

Mt. Pleasant, MI(989) 775-0898Muskegon, MI(231) 773-2510Saginaw, MI(989) 755-4344Traverse City, MI(231) 922-0851

Warsaw, IN(574) 267-6066

MicroAir TM1000 Air SystemTaskmaster Base Unit with 8x7 Arm Starting at $5,995

TYPICAL APPLICATIONS• Welding Smoke• Grinding Dust• Dry Particulate

FEATURES:• Dual Self-Cleaning Cartridges• High Capacity Cleaning• Compact Design• Wide Range of Filter Options• Low Power Requirements 120V Single Phase

• Broad Choice of Attachments to adapt to any application or process• Improved Source Capture Arm—designed for ease of movement, less restriction, and powerful collection at the source.

OPTIONS:• 2 hp 208/230 volt, 3 phase • 2 hp 460 volt, 3 phase motor

• Light Kit with hood mounted switch• Auto-Pulse Cartridge Cleaning• 99.97% Hepa Afterfilter• Refillable Module-Charcoal or Purasorb• Big Wheel Kit (Required with 8” x 9’ Arm Option)

Downdraft TablesALSO AVAILABLE FROM PURITY AND MICROAIR:

Filters Ambient Units