Enviro Engineering

28
Telecom., Control Systems & Environmental engineering

description

enviro

Transcript of Enviro Engineering

Page 1: Enviro Engineering

Telecom ., Control Systems & Environmental engineering

Page 2: Enviro Engineering

2

Kenya: HPPs automation and remote systems

CORE Palermo

CORE Glasgow

USA: CORE Portland

Tunisia: Distribution delegate dispatch

Spain: META projects

SpainMETA ProjectSTAR ProjectCORE ToledoPRODITEL

SCADA Kenia

Smart Grids Qatar

CORE Spain, USA, UK, Italy - Renewables

Iberdrola WF Telecommunications: Spain,

Europe, Mexico, USA, UK

STAR project (IBD Spain) & Smart Grids Qatar

Algeria: BCC Constantine

BCC Constantin

SCADA Distribution -Arequipa

SCADA Distribution –SEAL- Peru

Iberdrola: Fiber Optics and Telecom Solutions

Telecommunications, Control Systems & Environmental engineering

Environmental engineering:Spain, UK, Peru and more

Page 3: Enviro Engineering

3

Control & Regulation

TelecontrolTelecommunications and Smart grid

Telecommunication solutions for operation of

electrical installations Definition &

implementation of pilot projects

Feasibility studies: technical analysis

and CBA (cost-benefit analysis)

Renewable energy control center

Control & protection systems of

hydropower plants

Dam emergency plans

Telecommunications network deployment

Generation delegate dispatch

SCADA Systems

Hardware/Software Development

Solutions

Types of projects:Engineering studies, EPC, EPCM

High technical knowledge and capabilities required to fully develop the projects. Continuous training and innovation.

Telecom. & Control Systems: Capacities

Telecom Solutions for other industries: Transportation, etc.

Electrical market access systems

Speed and voltage regulators

Ability to work with major manufacturers of PLCs, regulators, relays system, etc.

Definition & implementation of roll-out projects

I+D+I projects

Page 4: Enviro Engineering

4

Telecom. & Control Systems: References

Project Country Customer Description Scope Start-up

Qatar Smart Grid Qatar Kahramaa Smart grids Feasibility study & CBA 2015

Control & Telecom. Centre

Algeria SonelgazUpgrading of the electrical grid in

the region of Constantine EPC 2013

CORE UK UKScottish Power

RenewablesRenewable energy control center EPCM 2011

High Speed Train Vigo-La Coruña

Spain ADIFEnergy remote control and

telecommunicationEPC Since 2010

CORE USA USAIberdrola

RenewablesRenewable Energy Control Centre EPCM 2010

SCADA systemHPPs

Kenya KengenUpgrading of the control system of

the main HPs EPC 2010

STAR Project SpainIberdrola

DistributionSmart grids EPCM Since 2010

Metro lines: L1, L5 y L11

Spain MINTRA Madrid Metro telecommunications EPC 2007

Delegate Dispatch Spain Ibereólica Wind farm delegate dispatch EPC 2008

AVR Aguayo HPP Spain EON Voltage regulators replacement EPC 2009

National Distribution Centre

Tunisia STEGUpgrading of the National

Distribution Grid EPC 2005

Voltage & speed regulators

SpainIberdrola

GenerationReplacing voltage and speed

regulators EPC Since 2003

CORE Toledo - SCADA system

SpainIberdrola

RenewablesRenewable Energy Control Centre EPCM 2003

Meta Project SpainIberdrola

GenerationAutomation and Control of

58 HPsEPCM 2002

Telecommunications Spain Iberdrola Development of Iberdrola Spain's communications network

EPC/EPCM Since 1995

EPC = Engineering Procurement and ConstructionEPCM = Engineering Procurement and Construction ManagementSCADA = Supervisory Control And Data Acquisition

HPs = Hydroelectric plantsCMDS = Monitoring, diagnosis and simulation centreCBA = cost-benefit analysis

Page 5: Enviro Engineering

5

CORE – Control centre for renewable energies

The largest SCADA application in the World (of rene wable energies)

BASIC DATA

Location: Toledo (Spain)

Client: Iberdrola

Start Date: 2002

Commercial Operation 2003

MAIN TECHNICAL CHARACTERISTICS

On-line system designed to gather, monitor and archive all w ind-farm information and hasspecific features for operation, analysis and maintenance of Wind Farms.

Functions:• Centralized operation and control in real time• Control applications for energy management• Centralized communication• Remote control services for third parties

It was developed by Iberdrola Engineering and Const ruction in 2003 and is now installed in more than 150 wind farms with real-time supervision of m ore than 1,200,000 data

5

Page 6: Enviro Engineering

6

NCC – National Control Center Iberdrola

The largest integrated SCADA application in USA (of renewable energies)

BASIC DATA

Location:Portland y Phoenix (USA)

Client: Iberdrola Renewables

Start Date: 2009

Commercial Operation 2010

MAIN TECHNICAL CHARACTERISTICS

On-line system designed to gather, monitor and archive all w ind-farm information and hasspecific features for operation, analysis and maintenance of wind farms, photovoltaic plantsand substations associated to Iberdrola Renewables in USA

Functions:• Centralized operation and control in real time• Control applications for energy management• Centralized communication• Remote control services for third parties

It was developed by Iberdrola Engineering and Const ruction in 2010 and is now installed in more than 50 wind farms and photovoltaic plants with rea l-time supervision of more than 5,000,000 data,

controlling more than 5.5 GW6

Page 7: Enviro Engineering

7

CORE UK– Scottish Power Control Center

BASIC DATA

Location: Whitelee, y Cathcart (Scotland)

Client: Scottish PowerRenewables

Start Date: 2010

Commercial Operation 2011

MAIN TECHNICAL CHARACTERISTICS

On-line system designed to gather, monitor and archive all w ind-farm information and hasspecific features for operation, analysis and maintenance of wind farms, and substations

Functions:• Centralized operation and control in real time• Control applications for energy management• Centralized communication

It was developed by Iberdrola Engineering and Const ruction in 2010 and is now installed in more than 20 wind farms with real-time supervision of more th an 250,000 data, controlling 0.8 GW

The largest SCADA application in UK (of renewable e nergies)

7

Page 8: Enviro Engineering

8

CORE Italy – SER Control Center

BASIC DATA

Location: Palermo (Italy)

Client: SER (Societa Energie Rinnovabili)

Start Date: 2011

Commercial Operation 2013

MAIN TECHNICAL CHARACTERISTICS

On-line system designed to gather, monitor and archive all w ind-farm information and hasspecific features for operation, analysis and maintenance of wind farms, and substations

Functions:• Centralized operation and control in real time• Control applications for energy management• Centralized communication• Remote control services for third parties

It was developed by Iberdrola Engineering and Const ruction in 2011 and is now installed in more than 20 wind farms with real-time supervision of more th an 70,000 data, controlling 0.4 GW

The largest SCADA application in Italy (of renewabl e energies)

8

Page 9: Enviro Engineering

9

SCADA System – Kenya

BASIC DATA

Location: Kenya

Client: KenGen

Start Date: 2007

Commercial operation: 2009

MAIN TECHNICAL CHARACTERISTICS

Modernization of Control Systems of 6 Hydro Plants in Kenya, c ommunication links and full functionalityControl Center.

Features:• Modernization of instrumentation and local controls.• Complete telecommunication system (VSAT links, radio and fiber-optics)• Supply of 6 local SCADA systems• Supply of a full-functionality Control Center, complete with historical systems, video-wall, etc.• Supply of software tools for water reserve management integrated in the Control Centre.

Complex project in remote location. Iberdrola Engin eering applied its wide experience in diverse field s (hydro plants upgrade, communications and control).

9

Page 10: Enviro Engineering

10

Modernization of distribution network - Peru

BASIC DATA

Location: Arequipa (Peru)

Client: Southern Western Electricity (SEAL)

Start Date: 2004

Commercial Operation: 2005

MAIN TECHNICAL CHARACTERISTICS

Modernization of the electric distribution network of SEAL i n the region of Arequipa, Peru, includingautomation of the network and telecommunications.Features:• Adaptation of 11 Substations, with instalation of local RTUs.• Communications of the 11 STs with the control center through radio UHF links.• Telecontrol SCADA system and complete Control Center

A project with actions in many sites accomplished i n consortium with locals companies.

10

Page 11: Enviro Engineering

11

Automatic Generation Control Applications

AGC (Automatic Generation Control) and Economic Off ice

BASIC DATA

Location:Cartagena (Spain),Bizkaia (Spain)

Client:CC GDF CartagenaCC Bizkaia Energia

Start Date: 2005, 2009

Commercial operation 2005, 2009

MAIN TECHNICAL CHARACTERISTICS

Automatic Generation Control System for CCGT plants.Features:• AGC, IS (Interchange Scheduling)• Direct Communication with the Spanish System Operator (REE)

Highly dependable systems for Automatic Generation Control.

11

Page 12: Enviro Engineering

12

Wind Control Center Acciona - CESA

BASIC DATA

Location:Santiago de Compostela (Spain)

Client: CESA-Acciona

Start Date: 2005

Commercial operation: 2007

MAIN TECHNICAL CHARACTERISTICS

Control Center supervising 19 Wind Farms with their substat ions,

Features:• Adaptation of substations to remote control• Deployment of satellite communications network between Control Center and plants• Deployment of local communications gateways (UCCs)• Full Control Center with SCADA systems, video wall and historical systems (ORACLE, PI)

Complete turn-key project including adaptation of s ubstations to remote control, communication equipment and all HW and SW of the Control Center

12

Page 13: Enviro Engineering

13

Delegated Dispatch Centres (Spain)

BASIC DATA

Location: Spain

Client:Ibereólica, Avanzalia, etc.

Start Date: 2008

Commercial operation: 2011

MAIN TECHNICAL CHARACTERISTICSCentralized Systems for management of renewable generation according to Spanish legislation.

Features:• Homologated by the Spanish TSO (Transmission System Operator) REE• Control applications for energy dispatch in generation nodes.• Support of multiple technologies (photovoltaic inverters, wind turbines, etc.)

Standardized, limited-functionality Control Centres according to legal requirements of REE for renewable energy. Expandable to a complete Control Center

13

Page 14: Enviro Engineering

14

Wan Development

BASIC DATA

Location: Spain

Client: Iberdrola & others

Start Date: 1998

Commercial operation:

Currently running

MAIN TECHNICAL CHARACTERISTICS

Design, engineering, procurement, installation and commissioning of more than 15,000 km. Fibre Optic Cable(dark fibre) and several hundreds of links with the associated transmission systems (Lighted fibre).

• Current annual figures: 200 projects, 250 Km aerial fibre optic cable, 120 Km of underground fibre-opticcable, 1.500 Km of fibre alignment links, 100 links Lighted Fibre (PDH, SDH, DWDM, GbEth, etc.)including civil works.

• Different types of customers: Cable network operators, mobile operators, end users, etc.• Engineering: Identification and study of alternative routes, depending on the owner and the type of

infrastructure (airlines, pipeline, inside buildings, galleries, collectors, water channels, etc.). Preparationproject dark fibre optic link or transmission.

• Running installation jobs: Civil works, cable installation, auxiliary to the fibre optic elements (patchpanels, huts, junction boxes, etc.) and installation and commissioning of telecommunication equipment.

• Turnkey Projects: Including permits management.

14

Page 15: Enviro Engineering

15

Telecommunications solutions for renewables

BASIC DATA

Location:Spain & 11 other countries

Client: Iberdrola & others

Start Date: 1999

Commercialoperation:

Currently running

MAIN TECHNICAL CHARACTERISTICS

Design, engineering, procurement, installation and commissioning of Telecom Solutions for RenewableGeneration Plants, including telecommunication system for:

• Real-Time systems: SCADA and Regulation Systems.• Protection and Measurement Systems.• Monitoring Systems for Distribution and Transportation, accordingly with Country network code.• Telecommunication network for for Control Centres.Using all media and technologies: Fibre, Radiocommunications, Satellites LEO y GEO, PLC.• Historical figures: Over 200 Wind Farms and 120 Substations linked with control centres and offices in

Spain, Portugal, France, Poland, Hungary, Italy, Greece, Romania, USA, Mexico and Brazil.• Different types of customers: Normally Iberdrola Renewable but others.• Special Projects: Telecommunications for 8 control centres of Renewable, including design, supply, and

commissioning of network access systems, security and redundancy systems.

15

Page 16: Enviro Engineering

16

Engineering support for Star Project (smart grid Iberdrola)

BASIC DATA

Location: Spain

Client: Iberdrola

Start Date: 2010

Commercial operation: Currently running

MAIN TECHNICAL CHARACTERISTICS

Engineering support for the deployment, operation and maintenance of Project STAR (System for

Telemetering, management and Automation of the Grid), Smart Grid Project of Iberdrola Distribution,

engineering functions are developed in the following areas :

Planning and Project Management, Secondary Cells, Automation Cells, Certification and standardization,

Field Telecommunications Support and in Level 3, PRIME Telecommunications Network Access

Telecommunications Network Acceptances, Protections, Telecommunications Network Design and

Planning, associated fibre Optics works, training of operation and maintenance.

16

Page 17: Enviro Engineering

17

Smart grid feasibility study and pilot project (Qatar smartgrid project)

BASIC DATA

Location: Qatar

Client:Kahramaa(Iberdrola)

Start Date: 2013

Commercial operation: Currently running

MAIN TECHNICAL CHARACTERISTICS

Iberdrola Engineering is working on meticulously surveying the Qatari grid in order to analyze the feasibility

of deploying a Smart Grid in Qatar. Results of this survey have been the following:

• Technical feasibility study for Smart Grid deployment.

• Pilot project design that includes: Smart Metering (Electricity and Water), Distributed Energy

Resources (DER) Integration, Distribution Automation and MV monitoring.

• Cost-benefit analysis: using EPRI’s (Electric Power Research Institute) methodology Iberdrola

Engineering has been able to calculate benefits of the Smart Grid deployment in Kahramaa’s

network. This quantification includes economic, reliability, environment and security benefits.

17

Page 18: Enviro Engineering

18

Participation in projects of I+D+i about smart grids

BASIC DATA

Location: Spain

Client: IBERDROLA

Start Date: 2010

Commercial operation: Currently running

MAIN TECHNICAL CHARACTERISTICS

Participation as engineering support in the development of the following projects:

• PRICE (Project of Smart Grids in the Corredor del Henares). It is a project that aims to respond tothe technological challenges presented worldwide electrical systems

• Grid4EU. It is an innovative project proposed by several Smart Grid energy distributors (DSO) mainlythe Czech Republic, France, Germany, Italy, Spain and Sweden in collaboration with suppliers ofelectrical services, equipment and developers

• iGREENGrid. It focuses on increasing the capacity for new distributed renewable energy sources (DER)in electricity distribution networks without compromising reliability and quality of supply

• DISCERN. Its main objective is to determine the optimal degree of intelligence to provide new electricitynetworks of Smart Grid benefits

• ADVANCED. It aims to develop a framework to allow residential, commercial and industrial consumersparticipate in initiatives of "Active Demand" at European level

18

Page 19: Enviro Engineering

19

Ave Vigo – Coruña: Power control & telecomms

BASIC DATA

Location: Spain

Client:Ministerio Fomento / ADIF

Start Date/ Commissioning Fase1 (section Santiago –Coruña):

April 2010/ September 2012

Start Date/ Commissioning Fase2 (section Vigo –Coruña):

March 2013 / Currently developing

MAIN TECHNICAL CHARACTERISTICS

Remote Control and monitoring of Energy Systems and fixed telecommunications associated to substations,power centres and stations Atlantic Axis Vigo – Coruña of High Speed

• Physical Layer Network: Civil works and fiber optic development.• Transport Network: SDH Transmission System Red Line and IP Multiservice Centres and Power

Stations• Remote Control System Between Vigo – A Coruña: New Control and Operations Centre

19

Page 20: Enviro Engineering

20

Bureau Central de Conduite - Tunisia

BASIC DATA

Location: Tunisia

Client: STEG

Start Date: April 2004

Commercial operation: June 2008

MAIN TECHNICAL CHARACTERISTICS

Project Management (SCADA and Telecommunications) and responsible for telecommunications package

including design, engineering, supply of equipment, training of operation, assembly and commissioning of the

telecommunications system associated with Distribution Dispatch Tunisia.

• UHF data Network: Access network of low capacity digital radio (80 repeaters and 1500 remote

stations).

• UHF voice Network : For mobile communications between the office and the area agents.

• Construction of 6 buildings: Distribution National Centre, in the Tunisian capital, and five

headquarters in the cities of Sousse, Grombalia, Jendouba, Gabès and Gafsa.

20

Page 21: Enviro Engineering

21

Bureau central de conduite Constantine - Algeria

BASIC DATA

Location: Algeria

Client: ABB / Sonelgaz

Start Date: June 2005

Commercial operation: January 2013

MAIN TECHNICAL CHARACTERISTICSDesign, engineering, procurement, training of operating personnel, supervision of erection and commissioningof different telecommunication networks associated to the Distribution Dispatch of Constantine region. Verycomplex since it is widely dispersed facilities in a very large territory 60.000 km2.

• Microwave Network: For interconnection between the CCP (Main Control Centre) y CCS (SecondaryControl Centre). In total 11 pitches between terminal stations and repeaters.

• WLL Network: Radio access network of high capacity (29 repeaters and 70 remote stations).• UHF data: Access network of low capacity digital radio (29 repeaters and 1029 remote stations).• UHF voice: For mobile communications between the office and the agents area (23 repeaters, 82 fixed

terminals, 219 mobile terminals and 236 portable terminals).• Telephony System: 4 Switchboards for CCP and CCS network configured and with linked to the mobile

network.• Telecommunications integrator: Allows direct calls between the two networks voice , UHF and

Telephony, in addition to the joint operation of these from the 4 operator stations.• Sistema de telemetering for MV customers: 200 modems GSM and 200 modems by conventional

telephone line.

21

Page 22: Enviro Engineering

22

META Project - Spain

BASIC DATA

Location: Spain

Client: Iberdrola

Starting Date: 1996

Commercial operation: 1996-2001

Scope: EPC

MAIN TECHNICAL CHARACTERISTICS

� Automation of hydroelectric plants over 10MW (and some minor with special features). The number of

plants involved in the project were 58, in 4 basins. It included 141 groups, with a rated capacity of 7,956

MW , representing 97% of the hydroelectric power Iberdrola. The aim of the project was the operation and

supervision of the central from a remote operation center, which made necessary the replacement of

control systems, voltage regulators and turbine governors, protection, auxiliary services, etc.

Automation Hydro Power Plants

22

Page 23: Enviro Engineering

23

REMIN Project - Spain

BASIC DATA

Location: Spain

Client: Iberdrola

Starting Date: 2002

Commercial operation: 2007

Scope: EPC

MAIN TECHNICAL CHARACTERISTICS

� Automation of Iberdrola small hydro power plants. Iberdrola Engineering developed an integrated control

and protection equipment (WAD) which was installed in over 30 such power plants. The project included

the supply and commissioning of the system.

Small Hydro Automation

23

Page 24: Enviro Engineering

24

Excitation system and turbine governor - Spain

BASIC DATA

Location: Spain

Client: Iberdrola

Starting Date: 2003

Commercial operation: 2013

Scope: EPC

MAIN TECHNICAL CHARACTERISTICS

� Renewal of excitation systems and turbine governor in Iberdrola Hydro Power Plants.

� During the last 10 years we have undertaken the replacement of equipment in more than 15 plants

(Azután, Cedillo, Conso, Villarino, Aldeadavila, La Muela, Sobradelo, etc.) with a power range for group of

2-234MW.

24

Page 25: Enviro Engineering

25

Aguayo HPP – Spain

BASIC DATA

Location: Spain

Client: EON Generación

Starting Date: 2005

Commercial operation: 2005-2009

Scope: EPC

MAIN TECHNICAL CHARACTERISTICS

� Aguayo Pumped-storage power plant, with four reversible groups 85MW each, dating from 1981. Due to

being existing for years , and because of problems in design and maintenance, the renovation plan of the

four groups was carried out consecutively along several years. The project included engineering, supply,

installation and Commissioning of the voltage regulators in the four groups.

Renewal Voltage Regulators

25

Page 26: Enviro Engineering

26

Soft Starter Gabriel y Galán HPP - Spain

BASIC DATA

Location: Spain

Client: Iberdrola

Starting Date: 2012

Commercial operation: 2014

Scope: EPC

MAIN TECHNICAL CHARACTERISTICS

� Installation of a new Soft Starter for the unique group of Gabriel y Galan Pumped-storage power plant.

The project included:� Supply new turbine governor, excitation system and protection relays.� Performing engineering adaptation of new equipment supplied to the installation.� Removal of the old systems and installation of all the new equipment supplied.� Performing the commissioning of the new equipment, and assist to the commissioning of the

starter.

26

Page 27: Enviro Engineering

2727

Projects technical assistance

Environmental management and

sustainability

Environmental characterization and modeling

Environmental assessment

Preliminary and feasibility

environmental studies

Environmental Impact Studies

Environmental permissions

Field studies. Data Processing

Specific and in-depth studies

Weather measurement and

forecast

Environmental control & modelling system in real-time

Photochemical modeling

Advanced modelling & monitoring of air

water & noise quality

EMS design & audit

Environmental Risk Analysis

Surveillance plans and environmental

control

Biodiversity management plans

Sustainability management plans

Waste production and management reports

Environmental Engineering: Capabilities

Over 20 years’ of experience in the execution of en vironmental studies and projects, both within the Iberdrola Group and for t he customers.

Analysis of environmental requirements

Noise verification and guarantees

Implementation of environmental

monitoring systems

Inventories and management systems &

emissions reporting

CEMS installation and certification

Page 28: Enviro Engineering

2828

Environmental Engineering : References

Project Country Client Description Scope Start-up

MeteoFlow 13 countriesIberdrola

Renovables Wind production forecast System Since 2004

ARIES, PRESA SpainIberdrola, Repsol, GDF, Gas Natural

Atmospheric Environment Monitoring

System2003-09

Start-up 2009

SUMO UKEuropean Space

AgencyHelp and support system in marine

operationsSystem. Innovation and

evidence project2014-2016(*)

EsIA WF Mark Hill UKScottishPower Renewables

Environmental Impact Study Impact studies and processing

2013-14

Damhead Creek 2 CCGT

UKScottishPower

GenerationEnvironmental studies prior to the

construction of the plantField studies and

processing2012-14

Projects C-10, ADI-1000 y CARPU

Spain Repsol/PetronorImpact studies on the expansion of Cartagena, Muskiz and Puertollano

refineries.

Impact studies and processing

2007-2012

Environmental Impact Studies

Spain Iberdrola-Several

In more than:- 100 Wind farms- 200 Lines and Substations- 40 in Industry and Generation

Impact studies and processing

2000-2014

SGAIGlobal management

modelSeveral Iberdrola

Comprehensive Environmental Management System and Global

Model for Iberdrola

Study, design and implementation

assistance2005-2009

Meteorology & diffusion factors

SpainNuclear Plant

Almaraz. EnresaInstrumentation monitoring and

annual diffusion studiesStudies and technical

assistanceSince 1987

Noise modeling Peru Repsol Noise modeling on the expansion of 'La Pampilla‘ refinery

Studies and technical assistance

2012

(*) in negotiations