CHUBB PRODUCT CATALOGUE v2 - Locks Online · PDF filewhen specifying from the Chubb range....
Transcript of CHUBB PRODUCT CATALOGUE v2 - Locks Online · PDF filewhen specifying from the Chubb range....
Int
ro
du
ct
ion
I n t r o d u c t i o n
• C y l i n d e r s
• M o r t i c e L o c k s
• R i m L o c k s
• P a d l o c k s
• S e c o n d a r y S e c u r i t y
• A c c e s s C o n t r o l
• F u r n i t u r e
• D o o r C l o s e r s
• E s c a p e H a r d w a r e
• H i n g e s
I n t r o d u c t i o n
Catalogue Index
Cyl inders
P r o d u c t C a t a l o g u e
Padlocks Furniture & F itt ings Hinges
Mort ice Locks Secondary Security Door Closers Index by Part No
Rim Locks Access Control Escape Hardware Contact ing us
The Chubb name has been synonymous withexcellence in security systems for over onehundred and seventy five years.
The consistently high standards ofengineering of its locks had already madeChubb a household name by the beginning ofthe twentieth century.
Today, we may be in a new century but Chubbis still the premier name in security nowoffering high security products for both thehome and commercial use. As part of ourongoing policy of only offering products thatmeet the highest levels of quality Chubb isaccredited with and meets the requirementsof BS EN ISO 9001: 1994.
We have made every effort to ensure that attime of going to print all information shownin this catalogue is correct. However, in ourefforts to continually improve ourproducts and offer only the highestlevels of security and quality we reservethe right to make alterations to theproduct specifications shown in thiscatalogue.
I n t r o d u c t i o n
The National House Building Council offersgeneral guidance on security for dwellings,flats and maisonettes.
Products endorsed with the UL mark havepassed strict testing procedures under thecontrol of the Underwriters LaboratoriesIncorporated.
The Association of British Insurers providesminimum security recommendations forexternal doors and windows.
The application of the CE mark is currentlyrestricted to products covered by the lowvoltage and EMC Directives.
The ANSI reference can be claimed when aproduct conforms to the relevant AmericanStandards Institute Specification.
The Loss Prevention Certification Boardprovides approval and certificationmarking on a range of security fittings.
The Master Locksmiths Association providesguidelines covering minimum securitylevels for domestic properties.
Products that meet MOBH3PS have beentested to the performance specificationsissued by the Property Services Agency.
Standards & Approvals
Chubb recognises that in addition to it’s own high quality standardsthe approval of it’s products by independent organisations is neededto meet the requirements of many regulations in today’s market.
In order to help simplify all of these standards we have provided ineach section of the catalogue a reference page showing each of thestandards. Additionally we have where applicable noted against eachproduct which standards apply to that product.
Shown below are the independent standards organisation with a briefdescription to the meaning and reference of each.
These pan-European standards classifyproducts into grades based on a seriesof exacting tests.
Products endorsed with the Kitemarkhave passed a strict testing procedureunder the control of the BritishStandards Institution.
A BS reference can be claimed when aproduct conforms to the relevantBritish Standard.
Chubb is accredited with andmeets the requirements of BS EN ISO 9001: 1994.
P r o d u c t C a t a l o g u e
Security Features
Chubb have developed a series of icons to enable theprocess of product specification to be simplified. Webelieve that these icons represent the most importantfeatures when looking to specify architectural hardwareor security products.
Throughout this whole catalogue constant referencewill be made to each of these icons. Each icon representsa feature that, irrespective of what type of product itrelates to, can be used to identify any relevant securityfeatures.
Chubb, simplifying the specification process
1
2
3
4
Drill ResistantHardened protection against drillattack.
5
6
8
9
10
11
12
Torque ResistantBuilt in strength against torqueattack.
Saw ResistantHardened protection against sawattack.
Force ResistantBuilt in strength against force attack.
Pick ResistantBuilt in protection to resist picking.
Corrosion ResistantProducts conform to appropriateanti-corrosion requirements.
Tamper ResistantBuilt in protection against tampering.
Fire ResistantProducts conform to appropriate firetest requirements.
EscapeProducts for use on an escape door.
Key ControlThe products can be included in akey control system.
GuaranteeProducts are guaranteed for a periodof time. (Unless specified otherwisethis will be one year)
Protected SectionProducts are available as an optionon a patented key section.
7
I n t r o d u c t i o nP r o d u c t C a t a l o g u e
This catalogue is divided into sections by product range.Each section has been developed so that it can be usedin isolation and will provide all the informationrequired to assist when specifying from the Chubbrange.
Each product range brochure has three areas ofinformation:
Product Range Introduction
Product Range Overview
Product Specifications
How to Use the Catalogue
I n t r o d u c t i o n
1
1
2
3
The product range introductionfirstly shows the standards andsecurity icons reference pagetogether with a page detailingfeatures and functions to be foundwithin the range
This page also providesexplanations of terminologyand shows product optionssuch as finishes and lockingmechanisms.
Chubb have developed a series oficons to enable the process ofspecification to be simplified.Throughout the whole catalogueconstant reference will be madeto these icons.
This page details how each of therelevant icons are applicable tothe product range shown withineach section.
In each product rangeintroduction we have includedinformation which helps toexplain the features, functionsand applications of the productswithin the section.
The index is included toguide you through eachsection.
Product Range Introduction
P r o d u c t C a t a l o g u e
How to Use the Catalogue
I n t r o d u c t i o n
2The second area of information to befound within each product rangebrochure is the range overview. Thedouble page spread acts both as acontents page for the brochure but alsoprovides product information via thespecification table which also provides aproduct range comparison.
The product specification pages containall the relevant information to assistwhen specifying from the Chubb range.
This page of the catalogue showsa photo gallery of the productrange, which can be cross-referenced, to the specificationtable shown on the page below.
The left hand side of thespecification table provides all theessential information relating tohow the icons apply to eachindividual product.
The right hand side of thespecification table provides allthe essential informationrelating to the features,functions and finishes availablein each individual product.
Product Range Overview
P r o d u c t C a t a l o g u e
How to Use the Catalogue
I n t r o d u c t i o n
3The greater part of eachcatalogue section is devotedto providing more detailedinformation about eachindividual product. Eachproduct is represented bothwith a photograph anddimensional drawing togetherwith some key features andspecification table.
A diagram of each product is shownproviding all essential dimensional detail.
The upper section of thespecification table providesinformation relating to the seriesof security icons.
The lower section of thespecification table providesinformation relating to productfeatures and functions togetherwith finish options.
Each product is representedby a colour photograph.
Product Specifications
P r o d u c t C a t a l o g u e
Hinged doors can open in one of four ways and this will determine whether the door isleft or right hand. Double doors with plain meeting stiles are also handed in this manner.
Likewise double rebated doors can open in one of four ways and this will determinewhether the door is left or right hand.
Handing of Doors
I n t r o d u c t i o n
Single Doors Inward Opening
UK Left Hand UK Right Hand
UK Left Hand UK Right Hand
Single Doors Outward Opening
Double Rebated Doors Inward Opening
UK Left Hand UK Right Hand
UK Left Hand UK Right Hand
Double Rebated Doors Outward Opening
Outside Outside Outside Outside
Outside Outside Outside Outside
P r o d u c t C a t a l o g u e
Key Control Systems
I n t r o d u c t i o n
There are various types of key control systems from simple key alike systems tocomplicated grand master key suites.
3 different locks all keyed alike
3 different locks each withtheir individual key
Example
Lock 2
Keyed Alike
This refers to a number of lockseach operated by the same key.This is also referred to as alikechange, locks to pass or keyed topass;
Example
Master Keyed
This is the simplest form of master keying. Each individuallock is operated by its own unique key and in addition acontrol key, (master key) operates all the locks in the suite.
Grand Master Keyed
It is most important that the keying requirements of a building are accuratelyand correctly detailed to provide security and accessibility for the keyholders ofthe building. Any recommendations must relate the security of the system to theconvenience of movement within the building.
Too much reliance on one side of the security, convenience balance will eithersacrifice the security offered or lose the convenience factor. It is thus vitallyimportant to strike the right balance.
Secure our helpChubb have trained technical staff who offer a free service to help with the planning of masterkey suites.
SECURITY CONVENIENCE
A Grand master key is a control key which operates a particular number of locks which are grouped into 2 or more setsof suites (known as sub-suites)
In this example Sub-suites A and B are in fact master-suites that are linked to a higher authority, the Grand Master Key
The individual keys which will operate the individual locks are known as change keys/servant keys or differ keys andwill only operate their particular lock.
Chubb cylinders can be master keyed to give maximum flexibility of design and ensure that the balance between security and convenience can be maintained.
Sub-Master Key A Sub-Master Key B
Lock 1 Lock 4 Lock 5 Lock 6Lock 1 Lock 2 Lock 3
Lock 1 Lock 3
Lock 3Lock 2
Master Key
Example
Grand Master Key
P r o d u c t C a t a l o g u e
i n t r o d u c t i o n
Throughout the catalogue you will see a column headed
The information shown under this heading can help you identify whichproducts can be Keyed Alike or Masterkeyed. The products that can bekeyed to work with other products are given a group code. It works inthe following way:
KA - means the product can be Keyed Alike with more of the sameproduct.
MK - means the product can be Masterkeyed with more of the sameproduct.
A GROUP LETTER (eg A) - means the product can be Keyed Alike orMasterkeyed with more of the same product AND with other productslisted in the same group.
eg, a window lock in group E could be made to work from the same keyas a security door fitting in group E.
The table shows an overview of the product keying groups;
Group Products
Key Control Systems
Key Control A Cylinders (TX mechanism)
B Window Locks (large hex key mechanism)
C Window Locks (lever key mechanism)
D Window Locks (tubular key mechanism)
E Window Locks and Security Door Fittings (spline key mechanism)
F Window Locks and Security Door Fittings (pin tumbler mechanism)
G Mortice Locks (Detainer mechanism)
H Padlocks (Ava mechanism)
Keying Groups
P r o d u c t C a t a l o g u e
C y l i n d e r s
Cy
lin
de
rs
• T X
• 6 P i n
• S e c u r i t y R o s e s
Note: We have made every effort to ensure that atthe time of going to print all information shown inthis catalogue is correct. However, in our efforts tocontinually improve our products and offer only thehighest levels of security and quality we reserve theright to make alterations to the productspecifications shown in this catalogue. Alldimensions provided within this catalogue areapproximate and for guidance only.
1
2
3
4
Drill ResistantHardened protection against drill attack.
5
6
8
9
10
11
12
Torque ResistantBuilt in strength against torque attack.
Saw ResistantHardened protection against saw attack.
Force ResistantBuilt in strength against force attack.
Pick ResistantBuilt in protection to resist picking.
Corrosion ResistantProducts conform to appropriate anti-corrosion requirements.
Tamper ResistantBuilt in protection against Tampering.
Fire ResistantProducts conform to appropriate fire testrequirements.
EscapeProducts for use on an escape door.
Key ControlThe products can be included in a keycontrol system.
GuaranteeProducts are guaranteed for a period oftime.
Protected SectionProducts are available as an option on apatented key section.
7
Security FeaturesIntroduct ion How to Specify
Keying Groups
Standards & Approvals
Cyl inders Index
• Introduction
• BSEN103 Classification
• Features and Functions
• Photo Gallery
• Range Table
• Euro Profile Cylinders
Single Cylinders
Double Cylinders
Turn & Key Cylinders
• Oval Profile Cylinders
Single Cylinders
Double Cylinders
Turn & Key Cylinders
• Rim Cylinders
• Mortice Screw in Cylinders
• Scandanavian Cylinders
Inner Cylinder
Outer Cylinder
• Security Escutcheons
C2
C3
C3
C4
C5
C6
C7
C8
C8
C9
C9
Chubb offers a very comprehensive range ofcylinders to suit most applications. They areavailable in the most common styles to enable thecustomer to utilise their existing ironmongery.The patent protection on the new TX system willhelp secure your system from illicit key duplication,and is available with the new Fast Response CentreService Support.For the most comprehensive and flexible range ofcylinders, Chubb has the solution.
Throughout the catalogue you will see a columnheaded.
The information shown under this heading canhelp you identify which products can be KeyedAlike or Masterkeyed.The products that can be keyed to work with otherproducts are given a group code.KA - means the product can be Keyed Alike withmore of the same product.MK - means the product can be Masterkeyed withmore of the same product.A Group Letter (eg A) means the product can beKeyed Alike or Masterkeyed with more of the sameproduct and with other products listed in the samegroup.For the complete range of products and theirkeying groups, see the chart in the introductionsection.
2 keys are supplied as standard, however see theprice list for any variations.
Chubb is accredited with and meets therequirements of BS EN ISO 9001: 1994.
Chubb have developed a series of icons to enablethe process of product specification to besimplified.
From today you can specifically detail yourrequirements for a product, therefore ensuring thatit includes particular security features.
Example: If you require a cylinder that is DrillResistant look for the Drill icon (2) in the rangetable.
Chubb, Simplifying the Specification Process.
Key Control
The Association of British Insurersprovides minimum securityrecommendations for external doors andwindows.
C y l i n d e r s
These pan-European standards classifyproducts into grades on a series ofexacting tests.
Keys
C2
C y l i n d e r s
Finishes:
BSEN1303 Class i f icat ion
▼
Features and Funct ions
Brass Satin Nickel
Ideal for Use with: Rim Locks, Mortice Locks, Access Control, Panic Hardware, Multipoint Locks.
Reversible key
The TX key can beinserted into thecylinder either way upand still operate.
TXNewly patented HighSecurity lockingsystem. The systemoperates on 3 rowsof pins totalling 10pins in all. The 2sensor pins in thecylinder interact withsensor pins in thekey. The key is a flatdimple type key.
6 PINConvenient systemfor generalapplications.System operates ona row of six lateralpins.
Key Systems
This standard classifies cylinders using a 7 digit coding system.Each digit refers to a particular feature of the product measured against the standard’sperformance requirements.
Digit 1 - Category of use - grade 1: Suitable for use at extremes of temperature- 20˚C to +80˚C.
Digit 2 - Durability - grade 4: 25 000 cycles completed.- grade 5: 50 000 cycles completed.- grade 6: 100 000 cycles completed.
Digit 3 - Door mass No requirement.
Digit 4 - Fire resistance - grade 0: No requirement.- grade 1: Cylinders shall be fire tested in accordance
with current fire test requirements of prEN 1634-1.
Digit 5 - Safety No requirement.
Digit 6 - Corrosion resistance - grade 0: No requirement.- grade 1: Conforms to grade 3 of BS EN 1670
as a minimum.
Digit 7 - Security Cylinders will be classified in grades 1 to 5, where 5 is the highest. The grade of security can differ from one side of a double cylinder to the other.
Grades1 2 3 4 5
Min. no. of effective differs 100 300 15 000 30 000 100 000Min. no. of movable pins 2 3 5 6 6Direct coding on key YES YES NO NO NOMax. net drill time (mins.) - - - 3 5Total drill test time (mins) - - - 5 10Chisel attack resistance (No. of blows) - - - 30 40Cylinder extraction resistance - - - 15kN 15kNCylinder torque resistance (Nm) 2.5 5 15 20 30
ExampleThe following marking denotes a cylinder meeting the required category of use, durability grade 6 (100 000 cycles) with no fire resistance requirement, grade 1 corrosion resistance and grade 4 security.
Note: To gain chisel or torque resitance it is important that either, (1) the correct length of cylinder is used to be flush with the door/handle face OR (2) a high security rose is used to cover any cylinder protrusion.
1 6 - 0 - 1 4
Security Rose
Force ResistantSecurity roses or correct lengthcylinders prevent force attacks.
Protected SectionAvailable on a patented keysection.
Torque ResistantSide lugs, security roses or correctlength cylinders prevent twisting.
Pick ResistantMushroom pins in the cylinderinhibiting picking.
Drill ResistantHardened Steel Inserts in thecylinder body and plug.
Corrosion Resistant Products have successfullycompleted an anti-corrosion test.
GuaranteeGuarantee period applicablewhen used with original Chubbkeys and maintenanceinstructions followed.
Key ControlCylinders using the same keysystems can be supplied Keyed Alike, or Masterkeyed.
*
*
*1 2
Products have beentested to EN1303and graded.
Products meet theminimum ABI securityrecommendations.
Number of Keys2 keys are supplied asstandard, however seethe price list for anyvariations.
C3
C y l i n d e r s
Euro Prof i le Cyl inders
Scandinavian Oval Cyl inders
Oval Prof i le Cyl inders
Rim Cyl inders
Rim Cyl inders
Screw In Cyl inders
TXES Page
C6
TXOS Page
C7
TXED Page
C6 TXET Page
C6 TXR Page
C8
4LC Page
C8
TXTC Page
C8
Security Roses
3C14E & 3CE Page
C9 3C13CE Page
C9
TXOD Page
C7
TXSCI Page
C9 TXSCO Page
C9
TXOT Page
C7
C4
TX 6 Pin
Key Systems
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Std. Cam ReversiblePosition Key
Features & FunctionsStandards Finish Options
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● KA 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● ● ● ● ● ● A 10
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
1 6 - 0 - 1 3
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
● 1 6 - 0 - 1 5
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
25° ●
●
●
●
●
●
●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
●
● ●
● ●
● ●
● ●
● ●
BrassSatinNickel
Oval Prof i le Cyl inders
Rim Cyl inders
Mort ice Screw-in Cyl inders
Scandinavian Oval Cyl inders
C y l i n d e r s
Euro Prof i le Cyl inders
TXES3010 Euro Profile Single CylinderTXES3510 Euro Profile Single CylinderTXES4010 Euro Profile Single CylinderTXES4510 Euro Profile Single CylinderTXED3030 Euro Profile Double CylinderTXED3535 Euro Profile Double CylinderTXED4040 Euro Profile Double CylinderTXED4545 Euro Profile Double CylinderTXET3030 Euro Profile Turn & Key CylinderTXET3535 Euro Profile Turn & Key CylinderTXET4040 Euro Profile Turn & Key CylinderTXET4545 Euro Profile Turn & Key Cylinder
TXOS3010 Oval Profile Single CylinderTXOS3510 Oval Profile Single CylinderTXOS4010 Oval Profile Single CylinderTXOS4510 Oval Profile Single CylinderTXOD3030 Oval Profile Double CylinderTXOD3535 Oval Profile Double CylinderTXOD4040 Oval Profile Double CylinderTXOD4545 Oval Profile Double CylinderTXOT3030 Oval Profile Turn & Key CylinderTXOT3535 Oval Profile Turn & Key CylinderTXOT4040 Oval Profile Turn & Key CylinderTXOT4545 Oval Profile Turn & Key Cylinder
TXR Rim Cylinder4LC Rim Cylinder
TXTC Screw In Cylinder
TXSCI25 Scandanavian Oval Cylinder InnerTXSCO25 Scandanavian Oval Cylinder OuterTXSCI30 Scandanavian Oval Cylinder InnerTXSCO30 Scandanavian Oval Cylinder Outer
Security Features
Prot
ecte
d Se
ctio
n
Prot
ecte
d
Sect
ion
Dri
ll Re
sist
ant
Forc
e Re
sist
ant
Pick
Re
sist
ant
Torq
ue
Resi
stan
t
Key
Cont
rol
Corr
osio
n
Resi
stan
t
Gua
rant
ee
C5
C y l i n d e r s
• For use with Euro profile lock cases.• Gives key access from one side of a door.
Euro Prof i le S ingle Cyl indersTXES
LIST LENGTH LENGTH LENGTHNo. A B C
TXES3010 30 10 40TXES3510 35 10 45TXES4010 40 10 50TXES4510 45 10 55
TXES TXED TXET
Security Features
Standards
●
●
●
●
●
●
A
10
●
●
●
●
●
●
A
10
●
●
●
●
●
●
A
10
Brass ● ● ●
Satin Nickel ● ● ●
Std. Cam Position 25˚ 25˚ 25˚
Reversible Key ● ● ●
Finish Options
Features & Functions
● ● ●
TX ● ● ●
6 Pin
Key Systems
• For use with Euro profile lock cases.• Gives key access from both sides of a door.
Euro Prof i le Double Cyl indersTXED
LIST LENGTH LENGTH LENGTHNo. A B C
TXED3030 30 30 60TXED3535 35 35 70TXED4040 40 40 80TXED4545 45 45 90
• For use with Euro profile lock cases.• Gives key access from one side of a door and thumbturn operation from the other.• Turn suitable for people with Impaired Mobility.
Euro Prof i le Key & Turn Cyl indersTXET
LIST LENGTH LENGTH LENGTHNo. A B C
TXET3030 30 30 60TXET3535 35 35 70TXET4040 40 40 80TXET4545 45 45 90
ForceResistant
PickResistant
TorqueResistant
CorrosionResistant
Key Control
Guarantee
ProtectedSection
DrillResistant
A 17
17
33
33
17
33
B
C
BA
C
BA
C
1 6 - 0 - 1 5 1 6 - 0 - 1 5 1 6 - 0 - 1 5
C6
C y l i n d e r s
• For use with Oval profile lock cases.• Gives key access from one side of a door.
Oval Prof i le S ingle Cyl indersTXOS
LIST LENGTH LENGTH LENGTHNo. A B C
TXOS3010 30 10 40TXOS3510 35 10 45TXOS4010 40 10 50TXOS4510 45 10 55
• For use with Oval profile lock cases.• Gives key access from both sides of a door.
Oval Prof i le Double Cyl indersTXOD
LIST LENGTH LENGTH LENGTHNo. A B C
TXOD3030 30 30 60TXOD3535 35 35 70TXOD4040 40 40 80TXOD4545 45 45 90
• For use with Oval profile lock cases.• Gives key access from one side of a door and thumbturn operation from the other.• Turn suitable for people with Impaired Mobility.
Oval Prof i le Key & Turn Cyl indersTXOT
LIST LENGTH LENGTH LENGTHNo. A B C
TXOT3030 30 30 60TXOT3535 35 35 70TXOT4040 40 40 80TXOT4545 45 45 90
B A
C
A B
C
A B
C
17.6
31.6
17.6
31.6
17.6
31.6
TXOS TXOD TXOT
Security Features
Standards
●
●
●
●
●
●
A
10
●
●
●
●
●
●
A
10
●
●
●
●
●
●
A
10
Brass ● ● ●
Satin Nickel ● ● ●
Std. Cam Position 25˚ 25˚ 25˚
Reversible Key ● ● ●
Finish Options
Features & Functions
● ● ●
TX ● ● ●
6 Pin
Key Systems
ForceResistant
PickResistant
TorqueResistant
CorrosionResistant
Key Control
Guarantee
ProtectedSection
DrillResistant
1 6 - 0 - 1 5 1 6 - 0 - 1 5 1 6 - 0 - 1 5
C7
C y l i n d e r s
• For use with surface mounted locks operating from a tailbar.• Provide key access from one side of a door.• Suitable for doors from 38mm to 57mm in thickness.
R im Cyl indersTXR
• For use with surface mounted locks operating from a tailbar.• Provide key access from one side of a door.• Suitable for doors from 38mm to 57mm in thickness.
R im Cyl inders4LC
Mortice Screw in Cyl indersTXTC
46mm Ø
32mm47.5mm
32mm
32mm Ø29mm Ø Barrel
• For use with American stile or narrow stile mortice locksoperating from a 29mm threaded cylinder.
• Provide key access from one side of a door.
32mm71mm
TXR 4LC TXTC
Security Features
Standards
●
●
●
●
●
●
A
10
●
●
●
KA
10
●
●
●
●
●
●
A
10
Brass ● ● ●
Satin Nickel ● ●
Std. Cam Position
Reversible Key ● ●
Finish Options
Features & Functions
● ● ●
TX ● ●
6 Pin ●
Key Systems
ForceResistant
PickResistant
TorqueResistant
CorrosionResistant
Key Control
Guarantee
ProtectedSection
DrillResistant
1 6 - 0 - 1 5 1 6 - 0 - 1 3 1 6 - 0 - 1 5
C8
32mm Ø
C y l i n d e r s
• For use with Scandinavian oval profile lock cases.• Provides key access from the inside of a door.• Bolt through fixings.
Scandinavian Oval Cyl indersTXSCI
LIST LENGTHNo. A
TXSCI25 25TXSCI30 30
LIST LENGTHNo. A
TXSC025 25TXSC030 30
• For use with Scandinavian oval profile lock cases.• Provides key access from the outside of the door.• Bolt through fixings.
Scandinavian Oval Cyl indersTXSCO
High Security Cyl inder Escutcheons3C14E • 3CE
3C14E 3CE
3C13CE
A
A
20
35
20
35
• For use with Euro profile cylinders.• Helps prevent against Torque and Force attacks.• Brass or Satin Finish.• Bolt through fixing.
3C14E
3CE
38mm
38mm
54mm
51mm
13mm
62.5mm
46mm
13.5mm
10mm
• For use with Euro profile cylinders.• Helps prevent against Torque and Force attacks.• Brass or Satin Finish.• Bolt through fixing.• Escutcheon covers cylinder for extra protection.
7mm
TXSCI TXSCO
Security Features
Standards
●
●
●
●
●
●
A
10
●
●
●
●
●
●
A
10
Brass ● ●
Satin Nickel ● ●
Std. Cam Position
Reversible Key ● ●
Finish Options
Features & Functions
● ●
TX ● ●
6 Pin
Key Systems
ForceResistant
PickResistant
TorqueResistant
CorrosionResistant
Key Control
Guarantee
ProtectedSection
DrillResistant
1 6 - 0 - 1 5 1 6 - 0 - 1 5
C9
C y l i n d e r s
Notes
C10
M o r t i c e L o c k s
Mo
rt
ice
Lo
ck
s
• L e v e r M o r t i c e
• C y l i n d e r M o r t i c e
• A r c h i t e c t u r a l M o r t i c e
• R e b a t e S e t s
• L a t c h e s
• K e y B l a n k s
Note: We have made every effort to ensure that atthe time of going to print all information shown inthis catalogue is correct. However, in our efforts tocontinually improve our products and offer only thehighest levels of security and quality we reserve theright to make alterations to the productspecifications shown in this catalogue. Alldimensions provided within this catalogue areapproximate and for guidance only.
1
2
3
4
Drill ResistantHardened protection against drill attack.
5
6
8
9
10
11
12
Torque ResistantBuilt in strength against torque attack.
Saw ResistantHardened protection against saw attack.
Force ResistantBuilt in strength against force attack.
Pick ResistantBuilt in protection to resist picking.
Corrosion ResistantProducts conform to appropriate anti-corrosion requirements.
Tamper ResistantBuilt in protection against Tampering.
Fire ResistantProducts conform to appropriate fire testrequirements.
EscapeProducts for use on an escape door.
Key ControlThe products can be included in a keycontrol system.
GuaranteeProducts are guaranteed for a period oftime.
Protected SectionProducts are available as an option on apatented key section.
7
Security FeaturesIntroduct ion How to Specify
Standards & Approvals
Patented Key Systems
Mortice Locks Index
• Introduction
• Features and Functions
Lever Mortice Locks High Security Range
• Photo Gallery
• Range Table
• Range Details
• Rebate Sets
Lever Mortice Locks Security Range
• Photo Gallery
• Range Table
• Range Details
• Rebate Sets
Cylinder Mortice Locks
• Photo Gallery
• Range Table
• Range Details
• Rebate Sets
Architectural Mortice Locks
• Photo Gallery
• Range Table
• Range Details
Security Roses
Notes Page
M2
M3
M4
M5
M6 - 9
M9
M10
M11
M12 - 15
M15
M16
M16
M17 - 18
M18
M19
M19
M20 - 22
M23
M23
The Chubb name has been synonymous withmortice locks for over one hundred and seventy fiveyears.
Today Chubb offer a comprehensive range for botharchitectural specification and residential use.
These include lever, detainer and cylinder locks,some kitemarked to BS3621 for use on externaldoors as well as standard variants for internal andgeneral purpose doors.
Chubb is accredited with and meets therequirements of BS EN ISO 9001: 1994
Chubb have developed a series of icons to enablethe process of product specification to besimplified.
From today you can specifically detail yourrequirements for a product, therefore ensuring thatit includes particular security features.
Example: If you require a mortice lock that hashardened protection against drill attack, look forthe Drill Resistant icon (number 2) in the rangetable.
Chubb, Simplifying the Specification Process.
The National House Building Council offersgeneral guidance on security for dwellings,flats and maisonettes.
The Association of British Insurers providesminimum security recommendations forexternal doors and windows.
Products endorsed with the Kitemark havepassed a strict testing procedure under thecontrol of the British Standards Institution.
The Master Locksmiths Association providesguidelines covering minimum security levelsfor domestic properties.
M o r t i c e L o c k s
Keying GroupsThroughout the catalogue you will see a columnheaded.
The information shown under this heading canhelp you identify which products can be KeyedAlike or Masterkeyed.The products that can be keyed to work with otherproducts are given a group code.KA - means the product can be Keyed Alike withmore of the same product.MK - means the product can be Masterkeyed withmore of the same product.A Group Letter (eg A) means the product can beKeyed Alike or Masterkeyed with more of the sameproduct and with other products listed in the samegroup.
For the complete range of products and theirkeying groups, see the chart in the introductionsection.
2 keys are supplied as standard, however see theprice list for any variations.
Key Control
Keys
Due to recent changes to UK copyright laws, the best wayto prevent illicit copying of keys is to use a patented system.
A selected number of Chubb Mortice Locks are available on a restricted key system. Additional keys are only available through authorised Chubb RKS centres.
Chubb TX: The Chubb cylinder mortice lock cases can beused with the Chubb TX patented cylinder system, (seeCylinder Catalogue).
M o r t i c e L o c k s
Finishes:
the means by which the door is held closed
What Type of Door ?• A comprehensive range of locks for both exterior
and interior glass panelled or solid timber doors.
What i s Backset?
• This is the measurement fromthe edge of the door to thecentre of the keyhole.
• Locks with different backsetsare available depending uponapplication.
Locking the bolt so that it cannot be forced back.
Automatic (every time thedoor is closed it isdeadlocked)
BS3621 Thief Resistant Locks.Recommended by thePolice and the InsuranceCompanies
Key(external operation)
Thumbturn
Key(internal operation)
Latch
▼
*All locks are supplied complete with minimum of two keys as standard.
Features and Funct ions
DeadlockingLatch
Deadbolt
Hookbolt
Brass Satin
Ideal for Use with: Cylinder Rimlocks & Access Control Systems
●L DB
HBDL/L
RollerboltR
What are Centres?
• This is the measurement fromthe centre of the ‘follower’,which operates the handles, tothe centre of the keyhole.
• In the UK this is commonly57mm, although other sizes areavailable.
Easy Reversible Latch
Deadlocking
Locking Mechanism =
The means by which the lock is operated
Lever or Detainer Cylinder
Operating Mechanism=
Edgeof door
Centres
Backset
Force ResistantBox Strike to protect thebolts.
Saw ResistantHardened steel bolt, plates orhardened rollers.
Protected SectionAvailable on a patented keysection.
Pick ResistantLocking mechanism incorporatespick resistant device(s).
Drill ResistantSelected hardened or toughmaterials to resist drill attack.
Escape A single action withdraws all thebolts simultaneously
Key ControlProducts are Masterkeyble (MK)or able to be Keyed Alike (KA).
GuaranteeGuarantee period applicablewhen used with original ChubbKeys and maintenanceinstructions followed.
T G
Door Types
T Solid Timber
G Glass PanelledHandles
Security Rose
●
▲
Bolt Through Fixing
L e v e r M o r t i c e : H i g h S e c u r i t y R a n g e
Detainer
3G135Page
M6
3G114EPage
7 3K74EPage
7
7 Lever
3G117Page
M6 3G227Page
M6 3K77Page
M7 3K277Page
M73G110Page
M6
5 Lever
3G114Page
M8 3K74Page
M8 3U114Page
M8 3U74Page
M8 3G220Page
M9
5 Lever
3G114Page
M8 3K74Page
M8 3U114Page
M8 3U74Page
M8 3G220Page
M9
M4
Prot
ecte
d Se
ctio
n
Prot
ecte
d
Sect
ion
Dri
ll Re
sist
ant
Saw
Re
sist
ant
Forc
e Re
sist
ant
Pick
Re
sist
ant
Key
Cont
rol
Esca
pe
Gua
rant
ee
DB n/a Key Key
DB n/a Key Key
DB n/a Key Key
DB n/a Key Key
R/DB Roller Key Key
L/DB Roller Key Key
DB n/a Key Key
R/DB Roller Key Key
DB n/a Key Key
L/DB ● ● Key Key
DB n/a Key Key
Case Back CentresSize Set
73mm 44mm n/a
73mm 44mm n/a
67mm 40mm n/a
67mm 40mm n/a
67mm 40mm 57mm
67mm 40mm 57mm
67/80mm 40/53mm n/a
67/80mm 40/53mm 57mm
67/80mm 44/57mm n/a
67/80mm 44/57mm n/a
54mm 36mm n/a
●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
Door SpecificationSecurity Features
Security Features
Case Finishes
● ● ● ● ● 15
● ● ● ● ● G 15
● ● ● ● KA 15
● ● ● ● KA 15
● ● ● ● KA 15
● ● ● ● KA 15
O ● ● ● ● KA 15
O ● ● ● ● KA 15
● ● ● ● KA 15
● ● ● ● KA 15
● ● ● ● KA 15
SatinBrass Other
Security Detainer
Lever Mortice Locks
3G135
3G110
3G117
3G227
3K77
3K277
3G114
3K74
3U114
3U74
3G220
Security Detainer
7 Lever
Security 5 Lever
BS3621
BS3621
BS3621
BS3621
BS3621
BS3621
BS3621
BS3621
BS3621
BS3621
Key: Protected Section - O = Optional Locking Mechanism - R = Rollerbolt, DB = Deadbolt, L = Latch Bolt Through Fixings - ● = Handles MK = Masterkeyable KA = Keyed Alike Only G = Masterkey Grouping
Locking Bolt Easily DeadlockingMechanism Through Rev. Internal External
Fixings Latch
M5
Escape
L e v e r M o r t i c e : H i g h S e c u r i t y R a n g e
• Kitemarked to BS3621. Recommended by insurance companies and the police.
• Key operation from both sides of the door. • Master keyable with other detainer locks. • Can be supplied with microswitches for alarm systems.• Available on patented Chubb RKS system.
Detainer
7 Lever3G117 Deadlock 3G227 Deadlock
73mm
122mm 178mm
29mm
178mm
25mm
14mm
14m
m
19m
m
• Key operation from both sides of the door. • 74,000 key variations. Extra keys only available
direct from Chubb.• Available on patented Chubb RKS system.
• Kitemarked to BS3621. Recommended by insurance companies and the police.
• Key operation from both sides of the door. • 7 lever mechanism generating in excess of 6000 key variations.
BS3621: 1980
�
BS3621: 1980
�
BS3621: 1980
�
• Kitemarked to BS3621. Recommended by insurance companies and the police.
• Key operation from both sides of the door. • 7 lever mechanism generating in excess of 6000 key variations.• Extra long deadbolt with 20mm throw.
44mm
73mm
122mm 178mm
29mm
178mm
25mm
14mm14
mm
19m
m
44mm
67mm
76mm178mm
29mm
25mm
14mm
14m
m
19m
m
40mm
133mm
67mm
76mm 200mm
29mm
25mm
20mm14
mm
19m
m
40mm
152mm
3G135 3G110 3G117 3G227
DB
Key
Key
73
44
n/a
●
DB
Key
Key
73
44
n/a
●
●
DB
Key
Key
67
40
n/a
●
●
DB
Key
Key
67
40
n/a
●
●
Security Features
●
●
●
●
G
15
O
●
●
●
●
G
15
●
●
●
●
KA
15
●
●
●
●
KA
15
SawResistant
ForceResistant
PickResistant
Escape
Key Control
Guarantee
ProtectedSection
DrillResistant
3G110 Deadlock3G135 Deadlock
Security Features
Locking Mechanism
Bolt Through Fixings
Deadlocking Internal
Deadlocking External
Door Specification
Case Size (mm)
Backset (mm)
Centres (mm)
Case Finishes
Brass
Satin
Other
M6
Escape
L e v e r M o r t i c e : H i g h S e c u r i t y R a n g e
7 Lever
5 Lever
• Kitemarked to BS3621. Recommended by insurance companies and the police.
• Key and handle operation from both sides of the door. • 7 lever mechanism generating in excess of 6000
key variations.
• Kitemarked to BS3621. Recommended by insurance companies and the police.
• Key and handle operation from both sides of the door.• 7 lever mechanism generating in excess of 6000 key variations.• Extra long deadbolt with 20mm throw.• Bolt through fixings. • Easily reversible latchbolt.
• Kitemarked to BS3621. Recommended by insurance companies and the police.
• Key operation from both sides of the door. • Can be supplied to pass and are available with either
single or double pole microswitch.• Available on patented Chubb RKS System.• Extra long deadbolt with 20mm throw.
• Kitemarked to BS3621. Recommended by insurance companies and the police.
• Key and handle operation from both sides of the door. • Can be supplied to pass and are available with either
single or double pole microswitch.• Available on patented Chubb RKS System.• Extra long deadbolt with 20mm throw.
RKS
3K77 Sashlock
BS3621: 1980
�
BS3621: 1980
RKS
BS3621: 1980
BS3621: 1980
�
3K277 Sashlock
3G114E Deadlock N E W 3K74E Mortice Lock N E W
67mm
25mm
14mm
12m
m
18m
m
29mm
57mm
40mm
108mm
152mm
159mm
159mm67/80mm
25mm29mm
57mm
108mm
20mm
40/53mm
153mm 159mm
3K77 3K277
R/DB
Key
Key
67
40
57
●
●
L/DB
●
Key
Key
67/80
40
57
●
●
Security Features
●
●
●
●
KA
15
●
●
●
●
KA
15
SawResistant
ForceResistant
PickResistant
Escape
Key Control
Guarantee
ProtectedSection
DrillResistant
Security Features
Locking Mechanism
Bolt Through Fixings
Deadlocking Internal
Deadlocking External
Door Specification
Case Size (mm)
Backset (mm)
Centres (mm)
Case Finishes
Brass
Satin
Other
M7
L e v e r M o r t i c e : H i g h S e c u r i t y R a n g e
5 Lever
• Kitemarked to BS3621. Recommended by insurance companies and the police.
• Key operation from both sides of the door. • Can be supplied to pass and is available with
either single or double pole microswitch.• Available on patented Chubb RKS System.
5 Lever3U74 Sashlock
• Kitemarked to BS3621. Recommended by insurance companies and the police.
• Key and handle operation from both sides of the door. • Can be supplied to pass. Available with
either single or double pole microswitch.• Available on patented Chubb RKS System.
• Kitemarked to BS3621. Recommended by Insurance companies and the police.
• Key operation from both sides of the door. • Ideal as an upgrade lock as it will replace most
other lever mortice deadlocks with the minimum of carpentry.
• Kitemarked to BS3621. Recommended by Insurance companies and the police.
• Key and handle operation from both sides of the door. • Ideal as an upgrade lock as it will replace most
other lever mortice sashlocks with the minimum of carpentry.
3G114 Deadlock
BS3621: 1980
BS3621: 1980 BS3621: 1980
BS3621: 1980
3K74 Sashlock
3U114 Deadlock
77mm
70mm 145mm
108mm
57mm
67/80mm
44/57mm
15mm
25mm
30mm
177mm 200mm
25mm
15mm
30mm
160mm
44/57mm
67/80mm
40/53mm
25mm
14mm
29mm
133mm 178mm
108mm
57mm
40/53mm
67/80mm
25mm
14mm
29mm
159mm153mm
67/80mm
3G114 3K74 3U114 3U74
DB
Key
Key
67/80
40/53
n/a
●
●
R/DB
Key
Key
67/80
40/53
57
●
●
DB
Key
Key
67/80
44/57
n/a
●
●
L/DB
●
Key
Key
67/80
44/57
57
●
●
Security Features
O
●
●
●
●
KA
15
O
●
●
●
●
KA
15
●
●
●
●
KA
15
●
●
●
●
KA
15
SawResistant
ForceResistant
PickResistant
Escape
Key Control
Guarantee
ProtectedSection
DrillResistant
Security Features
Locking Mechanism
Bolt Through Fixings
Deadlocking Internal
Deadlocking External
Door Specification
Case Size (mm)
Backset (mm)
Centres (mm)
Case Finishes
Brass
Satin
Other
L e v e r M o r t i c e : H i g h S e c u r i t y R a n g e
5 Lever
• Kitemarked to BS3621. Recommended by insurance companies and the police.
• Key operation from both sides of the door. • Narrow stile is particularly suited to doors
where the width is restricted, eg french doors.• Extra long deadbolt with 20mm throw.
28mm
Size
13mm
19mm
25mm
3G135
✔
✔
✔
Rebate Sets
• Different size rebate sets are available to suit the range of Chubb Lever Mortice Locks.• Available in either satin or brass finish.
3G110
✔
✔
✔
3G117
✔
✔
✔
3G227
✔
-
-
3K77
✔
✔
✔
3G114
✔
✔
✔
3K74
✔
✔
✔
3U114
✔
✔
✔
3U74
✔
✔
✔
3G220
✔
-
-
3G220 Deadlock
25mm
20mm
54mm
131mm 180mm 178mm
36mm
18m
m
BS3621: 1980
3G220
DB
Key
Key
54
36
n/a
●
●
Security Features
●
●
●
●
KA
15
SawResistant
ForceResistant
PickResistant
Escape
Key Control
Guarantee
ProtectedSection
DrillResistant
Security Features
Locking Mechanism
Bolt Through Fixings
Deadlocking Internal
Deadlocking External
Door Specification
Case Size (mm)
Backset (mm)
Centres (mm)
Case Finishes
Brass
Satin
Other
• Only suitable for3G135 & 3G110.
• Only suitable for3G277.
• Only suitable for3U114.
3U277
-
-
-
• Only suitable for3U74
• Only suitable for3G220
• Details of Rebate sets for 3G117, 3K77, 3G114, & 3K74 are included on page M15.
3U277
L e v e r M o r t i c e : S e c u r i t y R a n g e
Detainer
3R35Page
M12 3R35X 3J60 3K70 3M50 3M51
5 Lever For Internal Doors N E W
3G115 3K75 3U115 3U75 3U177 3U677
M10
Page
M12Page
M12Page
M12Page
M13Page
M13
Page
M15Page
M14Page
M14Page
M14Page
M14Page
M13Page
M13
Prot
ecte
d Se
ctio
n
Prot
ecte
d
Sect
ion
Dri
ll Re
sist
ant
Saw
Re
sist
ant
Forc
e Re
sist
ant
Pick
Re
sist
ant
Key
Cont
rol
Esca
pe
Gua
rant
ee
Locking Bolt Easily Deadlocking 20mmMechanism Through Rev. Internal External Throw
Fixings Latch Deadbolt
D/L L Auto Auto
D/L L Auto Auto
L, DB Key Key
L, DB Key Key
Hookbolt Key Key
Hookbolt Key Key
DB n/a Key Key
R, DB Roller Key Key
DB n/a Key Key
L, DB ● Key Key
DB n/a Key Key
L, DB ● Key Key
L ●
Case Back CentresSize Set
80mm 50mm 56mm
80mm 50mm 56mm
165mm 83mm n/a
73mm 44mm 56mm
70mm 43mm n/a
70mm 43mm 56mm
67/80mm 40/53mm n/a
67/80mm 40/53mm 57mm
67/80mm 44/57mm n/a
67/80mm 44/57mm 57mm
65/77mm 44/57mm n/a
65/77mm 44/57mm 57mm
65/77mm 44/57mm n/a
● ●
● ●
●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
Door SpecificationSecurity Features
Security Features
Case Finishes
O ● ● G 10
● ● ● G 10
O ● ● ● G 10
O ● ● ● G 10
O ● ● ● G 10
O ● ● ● G 10
● ● ● KA 10
● ● ● KA 10
● ● KA 10
● ● KA 10
● KA 10
● KA 10
10
SatinBrass Other
Detainer
Lever Mortice Locks
3R35
3R35X
3J60
3K70
3M50
3M51
3G115
3K75
3U115
3U75
3U177 NEW
3U277 NEW
3U677 NEW
Key: Protected Section - O = Optional Locking Mechanism - R = Rollerbolt, D/LL = Deadlocking Latch, DB = Deadbolt, L = Latch Bolt Through Fixings - ● = Handles KA = Keyed Alike Only G = Master Keyed Grouping Finish - Sim Brass = Simulated Brass
5 Lever
3 Lever
Sim Brass
Sim Brass
M11
L e v e r M o r t i c e : S e c u r i t y R a n g e
• 5 Detainer mortice deadlocking latch suitable for external wooden doors where slam action is required.• The door is secured by an automatic deadlocking action, whilst the snib can be used to hold back when the door needs to be left ajar.• Operating handle on the inside can be secured by key from either side. Also increases security of deadlocking.• Masterkeyable with other detainer locks. • Can be modified for use as a fire escape lock (3R35X)
by inhibiting the facility to lock the handle. • Key operation from both sides, handle from either side, • Handle fitted to one side only (inside) 3R35X.
Detainer
Detainer
• 5 Detainer mortice lock combining a key operated deadlockingaction with the facility for using handles.
• Key and handle operation from both sides of the door. • Masterkeyable with other detainer locks.
3R35/3R35X Deadlocking Latch
3K70 Sashlock
• 5 Detainer Horizontalmortice lock for mainentrance or inter-communicating doorswhere door knobs arepreferred and a keyoperated deadlockingaction is required.
• Key and handle/knoboperation from both sidesof the door.
• Masterkeyable with other detainer locks.
80mm
148mm
178mm
200mm
44mm
165mm
29mm
98mm
14mm
15
19
67mm 83mm
178mm143
10
25mm
15
19
29mm
56
38
73mm25mm
29mm
44mm
14mm
19
148mm178mm
200mm
56
3R35 3R35X 3J60 3K70
DL/L
Auto
Auto
80
50
56
●
●
DL/L
Auto
Auto
80
50
56
●
●
L/DB
Key
Key
165
83
n/a
●
L/DB
Key
Key
73
44
56
●
●
Security Features
O
●
●
G
10
●
●
●
G
10
●
●
●
G
10
O
●
●
●
G
10
SawResistant
ForceResistant
PickResistant
Escape
Key Control
Guarantee
ProtectedSection
DrillResistant
Security Features
Locking Mechanism
Bolt Through Fixings
Deadlocking Internal
Deadlocking External
Door Specification
Case Size (mm)
Backset (mm)
Centres (mm)
Case Finishes
Brass
Satin
Other
3J60 Horizontal 2-bolt Lock
Escape
L e v e r M o r t i c e : S e c u r i t y R a n g e
5 Lever
• 5 Lever mechanism suitable for use on external doors.
• Key operation from both sides of the door.
3G115 Deadlock
Detainer
• 5 Detainer mortice lock for sliding or hinged doors.• The hook bolt clutches the lock to the door frame, whilst a
‘steady’ bolt prevents the door being lifted to release the hook. • Key operation from both sides of the door.• Masterkeyable with other detainer locks.• Available on patented Chubb RKS system.
• 5 Detainer mortice lock which is suitable for sliding doors requiring an automatic closing action.
• Handles can be fitted to one or both sides and the key can be used on either side to secure both the bolt and handle(s) & release hook.
• A projecting stump on the forend engages into the locking plate to prevent the door being lifted from the frame in the closed position.
• Bolt through fixing also provided.• Masterkeyable with other detainer locks.• Available on
patented Chubb RKS system.
3M50 Hook Bolt 3M51 Clutch Bolt
3K75 Sashlock
• 5 Lever mechanism suitable for use on external doors.
• Key and handle operation from both sides of the door.
144mm
77mm 108mm 153mm
14mm
159mm
67/80mm
40/53mm
25mm 30mm
133mm 178mm
67/80mm
40/53mm
25mm
14mm
29mm
225mm
178mm
70mm
144mm 178mm
43mm
25mm29mm
15
225mm
70mm
43mm
25mm
15mm
29mm
3M50 3M51 3G115 3K75
Hookbolt
Key
Key
70
43
n/a
Sim. Brass
Hookbolt
Key
Key
70
43
57
Sim. Brass
DB
Key
Key
67/80
40/53
n/a
●
●
R, DB
Key
Key
67/80
40/53
57
●
●
Security Features
●
●
●
●
G
10
●
●
●
●
G
10
●
●
●
10
●
●
●
10
SawResistant
ForceResistant
PickResistant
Escape
Key Control
Guarantee
ProtectedSection
DrillResistant
Security Features
Locking Mechanism
Bolt Through Fixings
Deadlocking Internal
Deadlocking External
Door Specification
Case Size (mm)
Backset (mm)
Centres (mm)
Case Finishes
Brass
Satin
Other
M13
70mm 145mm
108mm
57mm
44/57mm
25mm
12.5mm
177mm 200mm
25mm
12.5mm
30mm
160mm
44/57mm
65/77mm
L e v e r M o r t i c e : S e c u r i t y R a n g e
3 Lever
• 3 Lever mechanism suitable for internal doors.• Key operation from both sides of the door.• Ideal as an upgrade lock as it will replace most other 3 lever
mortice deadlocks with the minimum of carpentry.
• 3 Lever mechanism suitable for internal doors.• Key and handle operation from both sides of the door.• Ideal as an upgrade lock as it will replace most other 3 lever
mortice Sashlocks with the minimum of carpentry.
5 Lever
• 5 Lever mechanism suitable for use on external doors.• Key operation from both sides of the door.• Ideal as an upgrade lock as it will replace most other lever
mortice deadlocks with the minimum of carpentry.
• 5 Lever mechanism suitable for use on external doors.• Key and handle operation from both sides of the door. • Ideal as an upgrade lock as it will replace most other lever
mortice sashlocks with the minimum of carpentry.
3U115 Deadlock 3U75 Sashlock
3U177 Deadlock N E W 3U277 Sashlock N E W
44/57mm
145mm 160mm70mm
25mm 30mm
67/80mm
25mm 30mm
14mm
57mm177mm 168mm
67/80mm
44/57mm
14mm
3U115 3U75 3U177 3U277
DB
Key
Key
67/80
44/57
n/a
●
●
L, DB
●
Key
Key
67/80
44/57
57
●
●
DB
Key
Key
65/77
44/57
n/a
●
●
L, DB
●
Key
Key
65/77
44/57
57
●
●
Security Features
●
●
10
●
●
10
●
10
●
10
SawResistant
ForceResistant
PickResistant
Escape
Key Control
Guarantee
ProtectedSection
DrillResistant
Security Features
Locking Mechanism
Bolt Through Fixings
Deadlocking Internal
Deadlocking External
Door Specification
Case Size (mm)
Backset (mm)
Centres (mm)
Case Finishes
Brass
Satin
Other
108mm
65/77mm
30mm
L e v e r M o r t i c e : S e c u r i t y R a n g e
A selected number of Chubb Mortice Locks are available on a restricted key system.This offers extra protection against unauthorised key duplication. Additional keysare only available through authorised Chubb RKS Centres.
Size
13mm
19mm
25mm
3R35
✔
✔
✔
Patented Key Systems
Rebate Sets
• Different size rebate sets are available to suit the range of Chubb Lever Mortice Locks.• Available in either satin or brass finish.
3R35X
✔
✔
✔
3J60
Satin only
Satin only
Satin only
3K70
✔
✔
✔
3M50
-
-
-
3M51
-
-
-
3U177
-
-
-
3U277
-
-
-
3G115
✔
✔
✔
3K75
✔
✔
✔
3U115
✔
✔
✔
3U75
✔
✔
✔
3G114
3K74
✔
✔
System Available on the following
3U677 Mortice Latch N E W
• Medium duty latch.
• Handle operation from either side of the door.
• Suitable for use with unsprung handles.
3R35 ✔
System Available on the following
3K70 ✔
System Available on the following
25.5mm
11mm
24mm16mm65/77mm
70mm57mm
120.5mm
44/57mm
• Only suitable for3R35.
• Only suitable for3J60.
• Only suitable for3K70, 3C20.
• Only suitable for3G114, 3G115, 3G117.
• Only suitable for3K74, 3K75, 3K77.
• Only suitable for3U115.
• Only suitable for3U75.
C y l i n d e r M o r t i c e L o c k s
High Security
3C14/C
Security Case Only
3C14 3C24 3C10 3C203C24/C
Prot
ecte
d Se
ctio
n
Prot
ecte
d
Sect
ion
Dri
ll Re
sist
ant
Saw
Re
sist
ant
Forc
e Re
sist
ant
Pick
Re
sist
ant
Key
Cont
rol
Esca
pe
Gua
rant
eeLocking Bolt Deadlocking
Mechanism Through Internal ExternalFixings
DB ▲ Key Key
L, DB ●▲ Key Key
DB ▲ Key/Turn Key
L, DB ●▲ Key/Turn Key
DB ▲ Key/Turn Key
L, DB ●▲ Key/Turn Key
Case Back CentresSize Set
67mm 40mm n/a
67mm 40mm 48mm
67mm 40mm n/a
67mm 40mm 48mm
73mm 44mm n/a
73mm 44mm 53mm
● ●
● ●
● ●
● ●
● ●
● ●
Door SpecificationSecurity Features
Security Features
Case Finishes
● ● ● ● 15
● ● ● ● 15
● ● ● n/a 15
● ● ● n/a 15
● ● n/a 15
● ● n/a 15
SatinBrass Other
High Security
Cylinder Mortice Locks
Security Case Only
3C14/C
3C24/C
3C14
3C24
3C10
3C20
Key: Protected Section - O = Optional Locking Mechanism - R = Rollerbolt, DB = Deadbolt, L = Latch Bolt Through Fixings - ● = Handles, ▲ = Security Rose
BS3621
BS3621
M16
Page
M17Page
M17Page
M17Page
M17Page
M18Page
M18
Escape
C y l i n d e r M o r t i c e L o c k s
Security Case Only
• Manufactured to the same high security specifications as the 3C14/C.
• This heavy duty mortice deadlock case accommodates most euro profile cylinders.
• Extra long deadbolt with 20mm throw.• Case size 67mm only.
• Manufactured to the same high security specifications as the 3C24/C.• This heavy duty mortice lock case accommodates most euro
profile cylinders.• Easily reversible latchbolt.• Extra long deadbolt with 20mm throw.• Case size 67mm only.
3C14 Deadlock
High Security
• Kitemarked to BS3621. Recommended by Insurance companies and the Police.
• Key operation from both sides of the door.• Supplied complete with security escutcheon and 6 pin euro
profile cylinder. • Extra long deadbolt with 20mm throw.• Case size 67mm only.
• Kitemarked to BS3621. Recommended by Insurance companies and the Police.
• Key and handle operation from both sides of the door.• Easily reversible latchbolt.• Supplied complete with security escutcheon and 6 pin euro
profile cylinder. • Extra long deadbolt with 20mm throw.• Case size 67mm only.
3C14/C Deadlock 3C24/C Sashlock
3C24 Sashlock
67mm
76mm 153mm 200mm
20mm
20mm
20mm
20mm
25mm
29mm
153mm 200mm
67mm
40mm
25mm
29mm
108mm
153mm
200mm
67mm
40mm
25mm
29mm
40mm
67mm
76mm 153mm 200mm
25mm
29mm
40mm
3C14/C 3C24/C 3C14 3C24
DB
●
Key
Key
67
40
n/a
●
●
L, DB
●▲
Key
Key
67
40
48
●
●
DB
●
Key/Turn
Key
67
40
n/a
●
●
L, DB
●▲
Key/Turn
Key
67
40
48
●
●
Security Features
●
●
●
●
15
●
●
●
●
15
●
●
●
n/a
15
●
●
●
n/a
15
SawResistant
ForceResistant
PickResistant
Escape
Key Control
Guarantee
ProtectedSection
DrillResistant
Security Features
Locking Mechanism
Bolt Through Fixings
Deadlocking Internal
Deadlocking External
Door Specification
Case Size (mm)
Backset (mm)
Centres (mm)
Case Finishes
Brass
Satin
Other
108mm
48mm
48mm
M17
C y l i n d e r M o r t i c e L o c k s
Security Case Only
• This heavy duty mortice deadlock case accommodates most euro profile cylinders.
• Suitable for hinged wooden doors of not less than 40mm thick.• Two independently operated levers within the case control
deadlocking of the bolt and will frustrate manipulation at the locking mechanism by attempting to by-pass the cylinder.
• Bolt through fixings.
• This heavy duty mortice deadlock case accommodates most euro profile cylinders.
• Suitable for hinged wooden doors where handle operation is required.
• 64mm (21/2”) and 76mm (3”) case sizes available.
• Bolt through fixings.
3C10 Deadlock
Size
13mm
19mm
25mm
Rebate Sets
• Different size rebate sets are available to suit the range of Chubb Lever Mortice Locks.• Available in either satin or brass finish.
3C14
✔
--
3C24
---
3C10
✔
✔
✔
3C20
✔
✔
✔
3C20 Sashlock
73mm
14mm
25mm
29mm
122mm 178mm 178mm
44mm
73mm
148mm
53mm200mm
178mm
25mm
44mm
14mm
29mm
3C10 3C20
DB
●
Key/Turn
Key
73
44
n/a
●
●
L, DB
●
Key/Turn
Key
73
44
53
●
●
Security Features
O
●
●
n/a
15
O
●
●
n/a
15
SawResistant
ForceResistant
PickResistant
Escape
Key Control
Guarantee
ProtectedSection
DrillResistant
Security Features
Locking Mechanism
Bolt Through Fixings
Deadlocking Internal
Deadlocking External
Door Specification
Case Size (mm)
Backset (mm)
Centres (mm)
Case Finishes
Brass
Satin
Other
3C14/C
✔
--
3C24/C
---
• Only suitable for3C14.
• Only suitable for3C10.
• Only suitable for3C20.
A r c h i t e c t u r a l C y l i n d e r M o r t i c e L o c k s
Architectural Case Only
C2422Page
M20 C2454 C2420 C2455 C2465 C2421 C2486 C2424
Prot
ecte
d Se
ctio
n
Prot
ecte
d
Sect
ion
Dri
ll Re
sist
ant
Saw
Re
sist
ant
Forc
e Re
sist
ant
Pick
Re
sist
ant
Key
Cont
rol
Esca
pe
Gua
rant
ee
Locking Bolt DeadlockingMechanism Through Internal External
Fixings
L, DB ●▲ Key/Turn Key
DB ▲ Key/Turn Key
L, DB ●▲ Key/Turn Key
DB ▲ Key/Turn Key
L ●
DL/L ●▲ Auto Auto
L, DB ● Turn
L, DB ●▲ Key/Turn Key
Case Back CentresSize Set
92mm 60mm 72mm
92mm 60mm
92mm 60mm 72mm
92mm 60mm
92mm 60mm 72mm
92mm 60mm 72mm
92mm 60mm
92mm 60mm 72mm
St. Steel
St. Steel
St. Steel
St. Steel
St. Steel
St. Steel
St. Steel
St. Steel
Door SpecificationSecurity Features
Security Features
Case Finishes
O ● ● 10
O ● ● 10
O 10
O 10
O 10
O 10
10
O ● ● 10
SatinBrass Other
Architectural Case
Mortice Locks
C2422 Sashlock
C2454 Deadlock
C2420 Sashlock
C2455 Deadlock
C2465 Latch
C2421 Deadlocking Latch
C2486 Bathroom Lock
C2424 Escape Lock
Key: Protected Section - O = Optional Locking Mechanism - L = Latchbolt, DL/L = Deadlocking Latch, DB = Deadbolt Bolt Through Fixings - ● = Handles, ▲ = Security Rose Finish - St. Steel = Stainless Steel
Page
M20Page
M20Page
M20Page
M21Page
M21Page
M21Page
M21
A r c h i t e c t u r a l C y l i n d e r M o r t i c e L o c k s
• European size 72mm centres mortice lock case which accommodates most euro-profile cylinders.
• Key and handle operation from both sides of the door. Latchbolt operated by key.
• Extra long deadbolt with 20mm throw.• Easily reversible latchbolt.
S tandard Case Only
Security Case Only
• European size mortice lock case which accommodates most europrofile cylinders.
• Key operation from both sides of the door. • Extra long deadbolt with 20mm throw.
• European size 72mm centres mortice lock case which accomodates most euro-profile cylinders.
• Key and handle operation from both sides of the door. Latchbolt operated by key.
• 14mm throw deadbolt.• Easily reversible latchbolt.
• European size mortice lock case which accommodates most europrofile cylinders.
• Key operation from both sides of the door. • 14mm throw deadbolt
C2422 Sashlock N E W C2454 Deadlock N E W
C2420 Sashlock N E W C2455 Deadlock N E W
C2422 C2454 C2420 C2455
L, DB
●▲
Key/Turn
Key
92
60
72
St. Steel
DB
▲
Key/Turn
Key
92
60
St. Steel
L, DB
●▲
Key/Turn
Key
92
60
72
St. Steel
DB
▲
Key/Turn
Key
92
60
St. Steel
Security Features
O
●
●
10
O
●
●
10
O
10
O
10
SawResistant
ForceResistant
PickResistant
Escape
Key Control
Guarantee
ProtectedSection
DrillResistant
Security Features
Locking Mechanism
Bolt Through Fixings
Deadlocking Internal
Deadlocking External
Door Specification
Case Size (mm)
Backset (mm)
Centres (mm)
Case Finishes
Brass
Satin
Other
165mm
72mm235mm
92mm24mm
24mm
20mm
18mm
60mm
165mm
72mm235mm
92mm24mm
24mm
14mm
18mm
60mm
92mm24mm
22mm
14mm
60mm
165mm
235mm
90mm
72mm159mm
90mm
92mm24mm
22mm
20mm
60mm
166mm
166mm
A r c h i t e c t u r a l C y l i n d e r M o r t i c e L o c k s
• European size 72mm centres mortice lock case which accomodates most euro-profile cylinders.
• Handle operation from both sides of the door. • Easily reversible latchbolt.
S tandard Case Only
Standard Case Only
• European size 72mm centres mortice lock case which accomodates most euro-profile cylinders.
• Key and handle operation from both sides of the door. Latchbolt operated by key.
• Autodeadlocking latch, everytime the door is closed it is locked.• Easily reversible latchbolt.
• European size 72mm centres mortice lock case.• Handle operation from both sides of the door.• Easily reversible latchbolt.
• European size 72mm centres mortice lock case which accommodates most euro-profile cylinders.
• Key and handle operation from both sides of the door. Latchbolt operated by key.
• Extra long deadbolt with 20mm throw.• Single action escape action. One downwards movement of the
handle withdraws both the bolts simultaneously.• Easily reversible latchbolt.
C2465 Mortice Latch N E W C2421 Deadlocking Latch N E W
C2486 Bathroom Lock N E W C2424 Escape Lock N E W
C2465 C2421 C2486 C2424
L
●
92
60
72
St. Steel
DL/L
●▲
Auto
Auto
92
60
72
St. Steel
L, DB
●
Turn
92
60
St. Steel
L, DB
●▲
Key/Turn
Key
92
60
72
St. Steel
Security Features
O
10
O
10 10
O
●
●
10
SawResistant
ForceResistant
PickResistant
Escape
Key Control
Guarantee
ProtectedSection
DrillResistant
Security Features
Locking Mechanism
Bolt Through Fixings
Deadlocking Internal
Deadlocking External
Door Specification
Case Size (mm)
Backset (mm)
Centres (mm)
Case Finishes
Brass
Satin
Other
165mm
72mm235mm
92mm24mm
24mm18mm
60mm
79mm
165mm
235mm
92mm24mm
14mm
24mm18mm
60mm
166mm
165mm
72mm235mm
92mm24mm
20mm
24mm18mm
60mm
166mm
165mm
72mm235mm
92mm24mm
24mm18mm
60mm
166mm
Security Roses3C14/E
C y l i n d e r M o r t i c e L o c k s
3CE
3C14E
3C14E
38mm
3CE
38mm
54mm
10mm
• The following chart provides details of the various mortice keyblanks available.
Keyblanks
Key Number
K521
K722
K727
RKS Blank
RKS Blank
Suitable For:
Detainer Range Mortice Locks
BS and Non BS Range Lever Mortice Locks
6 Pin Cylinder Range
3G114, 3K74
3G110, 3R35, 3K70
• Ideal for use with euro-profile cylinder mortice lock cases.
Notes
M22
54mm
10mm
R i m L o c k s
Rim
Lo
ck
s
• H i g h S e c u r i t y
• D o u b l e S e c u r i t y
• D r a w b a c k L o c k
• S e c u r i t y R a n g e
• T r a d i t i o n a l S e c u r i t y
Note: We have made every effort to ensure that atthe time of going to print all information shown inthis catalogue is correct. However, in our efforts tocontinually improve our products and offer only thehighest levels of security and quality we reserve theright to make alterations to the productspecifications shown in this catalogue. Alldimensions provided within this catalogue areapproximate and for guidance only.
1
2
3
4
Drill ResistantHardened protection against drill attack.
5
6
8
9
10
11
12
Torque ResistantBuilt in strength against torque attack.
Saw ResistantHardened protection against saw attack.
Force ResistantBuilt in strength against force attack.
Pick ResistantBuilt in protection to resist picking.
Corrosion ResistantProducts conform to appropriate anti-corrosion requirements.
Tamper ResistantBuilt in protection against Tampering.
Fire ResistantProducts conform to appropriate fire testrequirements.
EscapeProducts for use on an escape door.
Key ControlThe products can be included in a keycontrol system.
GuaranteeProducts are guaranteed for a period oftime.
Protected SectionProducts are available as an option on apatented key section.
7
Security FeaturesIntroduct ion How to Specify
Standards & Approvals
Rim Locks Index
• Introduction
• What Type of Door ?
• What is Backset ?
• Features and Functions
• Photo Gallery
• Range Table
• High Security
• Double Security
• Drawback Lock
• Security
• Traditional Security
• Replacement Cylinder
• Cylinder Pull
• Multi-Point
• Notes Page
RL2
RL3
RL3
RL3
RL4
RL5
RL6
RL6
RL7
RL7
RL8
RL8
RL8
RL9
RL10RL11
Chubb offer a comprehensive range of cylinder rimlocks which are ideal for both architecturalapplication and residential use.
The range includes a high security variant,kitemarked to BS3621, for use on external doors, aswell as standard variants for internal doors or whenused with a Chubb mortice deadlock on externaldoors.
Chubb is accredited with andmeets the requirements of BS EN ISO 9001: 1994.
Chubb have developed a series of icons to enablethe process of product specification to besimplified.
From today you can specifically detail yourrequirements for a product, therefore ensuring thatit includes particular security features.
Example: If you require a rimlock that has hardenedprotection against drill attack, look for the DrillResistant icon (number 2) in the range table.
Chubb, Simplifying the Specification Process.
The National House Building Counciloffers general guidance on security fordwellings, flats and maisonettes.
The Association of British Insurersprovides minimum securityrecommendations for external doors andwindows.
Products endorsed with the Kitemarkhave passed a strict testing procedureunder the control of the British StandardsInstitution.
The Master Locksmiths Associationprovides guidelines covering minimumsecurity levels for domestic properties.
R i m L o c k s
Keying Groups
Throughout the catalogue you will see a columnheaded.
The information shown under this heading canhelp you identify which products can be KeyedAlike or Masterkeyed.
The products that can be keyed to work with otherproducts are given a group code.
KA - means the product can be Keyed Alike withmore of the same product.
MK - means the product can be Masterkeyed withmore of the same product.
A Group Letter (eg A) means the product can beKeyed Alike or Masterkeyed with more of the sameproduct and with other products listed in the samegroup.
For the complete range of products and theirkeying groups, see the chart in the introductionsection. At least 2 keys are supplied as standard, however see
the price list for any variations.
Key Control
Keys
BS3621
RL2
R i m L o c k s
Finishes:
What Type of Door ?• A comprehensive range of locks for both exterior
and interior glass panelled or solid timber doors.
• Variants available for outward opening doors.
• Locks available to suit doors between 38mm and 57mm thick.
What i s Backset?• This is the measurement from the edge of the
door to the centre of the keyhole.
• Locks are commonly supplied with either a 40mm or 60mm backset.
• Locks with a 40mm backset are normally used where there is restricted space, such as on a glass panelled door.
Automatic (every time the door isclosed it is deadlocked)
BS3621Recommended bythe Police and theInsuranceCompanies
Key(by a reverse turn of the key in the outside cylinder)
Snib(Internal snib button)
InternalKey
Either a slide, push buttonor turn of pull back handleto hold the bolt in the case.
DeadlockingLatch
▼
*All locks are supplied complete with at least two keys as standard.
Features and Funct ions
Deadbolt
Latch
Multi-PointInternal handle(by turn of key in handle)
Key in outsidecylinder
Brasslux Grey Champagne Gold White Gold Enamelled Chrome Plated
Ideal for Use with: Mortice Deadlocks & Access Control Systems
●
▲
DL/L MP
DB
L
Backset
Edgeofdoor
Deadlocking =
Locking the bolt so that it cannot be forced back.
Lockable Handle = Prevents someone reaching in andopening the door
Bolt Hold Back
Locking Mechanism = the means by which the door is held closed
Force ResistantMeets the force requirementsof BS3621.
Protected SectionAvailable on a patented keysection.
Torque ResistantSide lugs restricting twisting ofcylinder.
Pick ResistantLocking mechanism incorporatespick resistant device(s).
Drill ResistantHardened Steel Inserts in theoutside cylinder.
Saw ResistantHardened steel bolt, plates orhardened rollers.
Tamper Resistant Concealed fixings when door isclosed.
Key ControlCan be Masterkeyed or KeyedAlike (KA).
T G
GuaranteeGuarantee period applicablewhen used with original ChubbKeys and maintenanceinstructions followed.
Door Types
T Solid Timber
G Glass Panelled
RL3
R i m L o c k s
High Security
4L67 Page
RL6
Double Security
4L73 Page
RL6 4L74 Page
RL6
Cyl inder
4LC Page
RL8
Security
4L71 Page
RL7 4L72 Page
RL7
Cyl inder Pul l
4LP Page
RL8
Tradit ional
4L75 Page
RL8
Drawback Lock
4L69 Page
RL7 4L70 Page
RL7
Drawback Lock
CTS10TX Page
RL9
Mult i -Point
CTS30TX Page
RL9 CTS50TX Page
RL9
RL4
Door Backset Type ofThickness Door
Locking Lockable Bolt Hold DeadlockingMechanism Handle/Knob Back
Door SpecificationFeatures / Functions Case Finishes
Gold Enamelled
Gold Enamelled
Gold Enamelled
4L67 Standard
4L73 Narrow
4L74 Standard
4L69 Standard
4L70 Narrow
4L71 Narrow
4L72 Standard
4L75 Standard
CTS10TX
CTS30TX
CTS50TX
● ● ● ● ● ● 10
● ● ● ● 10
● ● ● ● 10
● ● ● 10
● ● ● 10
● ● ● 10
● ● ● 10
● ● 10
● ● ● ● ● 10
● ● ● ● ● 10
● ● ● ● ● 10
DB ● ● Auto Auto
DL/L ● ● Auto Auto
DL/L ● ● Auto Auto
DB/L ● Key Key
DB/L ● Key Key
DL/L ▲ ● Auto Auto
DL/L ▲ ● Auto Auto
DL/L ▲ ● Snib Key
DB,L ● Key Key
MP ● Key Key
MP ● Key Key
38-57mm 60mm T, GP
38-57mm 40mm T, GP
38-57mm 60mm T, GP
38-57mm 60mm T, GP
38-57mm 50mm T, GP
38-57mm 40mm T, GP
38-57mm 60mm T, GP
38-57mm 60mm T, GP
up to 48mm 53mm T, GP
up to 45mm 53mm T, GP
up to 45mm 53mm T, GP
●
● ● White
● ● White
● ●
● ●
● ● White
● ● White
● ●
ExternalInternalChampagne
GoldBrasslux Other
High Security
Drawback Lock
Tradit ional
Security
Mult i -Point
Double Security
R i m L o c k s
Key: Locking Mechanism - L = Latchbolt, DL/L = Deadlocking Latch, DB = Deadbolt, MB = Multi-Bolt, MP = Multi-Point Lockable Handle - ● From Inside, ▲ From Outside only Type of Door - T = Timber, GP = Glass Panelled
NEW
NEW
NEW
BS3621
Prot
ecte
d Se
ctio
n
Prot
ecte
d
Sect
ion
Dri
ll Re
sist
ant
Saw
Re
sist
ant
Forc
e Re
sist
ant
Pick
Re
sist
ant
Torq
ue
Resi
stan
t
Tam
per
Resi
stan
t
Key
Cont
rol
Gua
rant
ee
Security Features
RL5
R i m L o c k s
• Kitemarked to BS3621. Recommended by Insurance companies and the police.
• High Security 10 disc Ava mechanism providing a high level of protection against picking and manipulation.
• Hardened steel deadbolt which automatically deadlocks on closing the door.
• Key operation from the outside. Key lockable knob operation from inside.
• Keyblank number, B-K734-M.
BS3621: 1980
• Latchbolt automatically deadlocks on closing the door.
• Key operation from outside. Key lockable lever handle operation from inside.
• Keyblank number, B-K727.
High Security
4L67
4L73 4L74
4L67
Double Security4L73 4L74
4L67 4L73 4L74
DB
●
●
Auto
Auto
38-57mm
60mm
T, GP
●
DL/L
●
●
Auto
Auto
38-57mm
40mm
T, GP
●
●
DL/L
●
●
Auto
Auto
38-57mm
60mm
T, GP
●
●
Security Features
●
●
●
●
●
●
10
●
●
●
●
10
●
●
●
●
10
Features / Functions
Locking Mechanism
Lockable Handle
Bolt Hold Back
Deadlocking Internal
Deadlocking External
Door Specification
Door Thickness
Backset
Type of Door
Case Finish
Champagne Gold
Brasslux
Other White White
57mm
29mm
20mm
22mm
29mm
30mm
88mm
13mm
88mm
16mm
B
A
A B4L73 65mm 40mm4L74 85mm 60mm
53mm
27mm
26mm
60mm
85mm
18mm
25mm
70mm
27mm
37mm
70mm
SawResistant
ForceResistant
PickResistant
TamperResistant
Key Control
Guarantee
ProtectedSection
DrillResistant
RL6
TorqueResistant
TorqueResistant
R i m L o c k s
• Double throw deadbolt giving 20mm projection.
• Key operated deadbolt from either side.
• Latchbolt key operated from outside, handle operated from inside.
• Keyblank number, B-K727.
• Latchbolt automatically deadlocks on closing the door.
• Key operation from outside. Lever handle operation from inside.
• Security lock with deadlocking by reverse turn of key in outside cylinder.
• Keyblank number, B-K727.
Drawback Lock
4L69 4L70
4L71 4L72
Security
4L69 4L70
4L71 4L72
74mm
10mm
20mm
12mm
A
B47mm
31mm
22mm
29mm
74mm
27mm
A B4L69 92mm 60mm4L70 73mm 50mm
A B4L71 60mm 40mm4L72 92mm 60mm
45mm
25mm
5mm
74mm
15mm
74mm
30mm
25mm
22mm
B
A
4L69 4L70 4L71 4L72
DB, L
●
Key
Key
38-57mm
60mm
T, GP
●
●
DB, L
●
Key
Key
38-57mm
50mm
T, GP
●
●
DL/L
▲
●
Auto
Auto
38-57mm
40mm
T, GP
●
●
DL/L
▲
●
Auto
Auto
38-57mm
60mm
T, GP
●
●
Security Features
●
●
●
10
●
●
●
10
●
●
●
10
●
●
●
10
Functions
Locking Mechanism
Lockable Handle
Bolt Hold Back
Deadlocking Internal
Deadlocking External
Door Specification
Door Thickness
Backset
Type of Door
Finishes
Champagne Gold
Brasslux
Other WhiteWhite
SawResistant
ForceResistant
PickResistant
TamperResistant
Key Control
Guarantee
ProtectedSection
DrillResistant
RL7
R i m L o c k s
Tradit ional Security
Replacement Cyl inder Cyl inder pul l
4L75
4LC 4LP
41mm
68mm
60mm
92mm
15mm
24mm
25mm
24mm
19mm
68mm
4mm
4L75 4LC
DL/L
▲
●
Snib
Key
38-57mm
60mm
T, GP
●
●
38-57mm
●
Security Features
●
●
10
Optional
●
●
10
Functions
Locking Mechanism
Lockable Handle
Bolt Hold Back
Deadlocking Internal
Deadlocking External
Door Specification
Door Thickness
Backset
Type of Door
Finishes
Champagne Gold
Brasslux
Other
• Spare or replacement pin tumbler rim cylinder.• Available as 6 pin as standard.• Keyblank number, 6 pin = B-K727.
• Also available onChubb TXpatented system.List number TXR,(see cylindercatalogue).
• Provides an easy means of closing a door from the outside.• Suitable for use with all Chubb Cylinder Rim Locks.• Available in brass.
For use with:
4L71 ✓
4L72 ✓
4L75 ✓
• Classic styling with deadlocking by snib.
• Key operation from the outside. Lever/knob handle operation from inside.
• Security lock with deadlocking by reverse turn of the key in outside cylinder.
• Keyblank number, B-K727.
4L75
47mm
70mm
46mm Ø
32mm
5mm
18mm
SawResistant
ForceResistant
PickResistant
TorqueResistant
TamperResistant
Key Control
Guarantee
ProtectedSection
DrillResistant
RL8
R i m L o c k s
• Multiple locking points from 3 to 5.
• Supplied complete with High Security Patented TXSystem and security rose.
• Key operation from outside, key and lever frominside.
• Keyblank number CTXRKB
• Supplied complete with High SecurityPatented TX System and security rose.
• Key operation from outside, key and pullhandle from inside.
• Keyblank number TXRKB
Mult i Point Drawback LockCTS30TX, CTS50TX N E W CTS10TX N E W
CTS30TX = 3 CTS50TX = 5
Door Size CTS30TX CTS50TX
Standard 2215mm 2215mm
Max. Std. 2215mm 2215mm
Max. Special 2460mm 2460mm
Minimum 1850mm 1850mm
518mm
179mm
179mm
31mm
45mm
35mm
62mm
20mm
53mm
12.5mm
100mm
362mm
179mm
424mm
100mm
35mm
35mm35mm35mm
45mm
20mm20mm
53mm53mm
12.5mm
35mm
532mm
2215
mm
980mm
179mm
1056mm
2215
mm
45mm
CTS30TX CTS50TX
CTS30TX CTS50TX
CTS10TX CTS30TX CTS50TX
DB, L
●
Key
Key
up to 48mm
53mm
T, GP
MP
●
Key
Key
up to 45mm
53mm
T,GP
MP
●
Key
Key
up to 45mm
53mm
T, GP
Security Features
●
●
●
●
●
10
●
●
●
●
●
10
●
●
●
●
●
10
Functions
Locking Mechanism
Lockable Handle
Bolt Hold Back
Deadlocking Internal
Deadlocking External
Door Specification
Door Thickness
Backset
Type of Door
Finishes
Champagne Gold
Brasslux
Other Gold Enamel led
SawResistant
ForceResistant
PickResistant
TorqueResistant
TamperResistant
Key Control
Guarantee
ProtectedSection
DrillResistant
12.5mm35mm
RL9
P1
P a d l o c k s
Pa
dlo
ck
s
• C o n q u e s t
• S t e e l
• A l u m i n i u m
• L a m i n a t e d S t e e l
• B r a s s
• H a s p s a n d S t a p l e s
P2
Note: We have made every effort to ensure that atthe time of going to print all information shown inthis catalogue is correct. However, in our efforts tocontinually improve our products and offer only thehighest levels of security and quality we reserve theright to make alterations to the productspecifications shown in this catalogue. Alldimensions provided within this catalogue areapproximate and for guidance only.
1
2
3
4
Drill ResistantHardened protection against drill attack.
5
6
8
9
10
11
12
Torque ResistantBuilt in strength against torque attack.
Saw ResistantHardened protection against saw attack.
Force ResistantBuilt in strength against force attack.
Pick ResistantBuilt in protection to resist picking.
Corrosion ResistantProducts conform to appropriate anti-corrosion requirements.
Tamper ResistantBuilt in protection against Tampering.
Fire ResistantProducts conform to appropriate fire testrequirements.
EscapeProducts for use on an escape door.
Key ControlThe products can be included in a keycontrol system.
GuaranteeProducts are guaranteed for a period oftime.
Protected SectionProducts are available as an option on apatented key section.
7
Security FeaturesIntroduct ion How to Specify
Keying Groups Test ing
Padlocks Index
P a d l o c k s
• Introduction
• Padlock Choice
• Shackle Information
• Features and Functions
• Photo Gallery
• Range Table
• Conquest Range
• Battleship
• Cruiser
• Hercules
• Ava Brass
• Steel Range
• Aluminium Range
• Laminated Steel Range
• Brass Range
• Hasps and Staples Gallery
• Hasps and Staples Range Table
• Padbars
• Hasps and Staples
• Notes Page
P2
P3
P3
P3
P4
P5
P6
P7
P7
P7
P7
P8
P9
P9
P10-11
P12
P12
P13
P14
P15
Chubb offer a comprehensive range of padlockswhich are ideal for commercial, industrial andresidential use.
The range includes open, close and extra closevariants to suit the particular application, togetherwith a choice of hardened steel or stainless steelshackle.
In addition, a range of hasps and staples is availableto complement the padlock range.
Throughout the catalogue you will see a columnheaded.
The information shown under this heading canhelp you identify which products can be KeyedAlike or Masterkeyed.
The products that can be keyed to work with otherproducts are given a group code.
KA - means the product can be Keyed Alike withmore of the same product.
MK - means the product can be Masterkeyed withmore of the same product.
A Group Letter (eg A) means the product can beKeyed Alike or Masterkeyed with more of the sameproduct and with other products listed in the samegroup.
Example:A padlock in group H could be made to work fromthe same key as other products in group H.
Chubb is accredited with andmeets the requirements of BS EN ISO 9001: 1994.
How to SpecifyChubb have developed a series of icons to enablethe process of product specification to besimplified.From today you can specifically detail yourrequirements for a product, therefore ensuring thatit includes particular security features.
Example: If you require a padlock that hashardened protection against drill attack, look forthe Drill Resistant icon (number 2) in the rangetable on page 5 and then on subsequent pageswhere further product information is supplied.
Chubb, Simplifying the Specification Process.
As part of the Chubb commitment to provideproduct to meet customer requirements, Chubbpadlocks are subjected to exacting testprogrammes. These test padlocks for operating durability,resistance to corrosion as well as strength againstdifferent forms of attack such as drilling, sawingand twisting.
Key Control
P3
P a d l o c k s
Shackle Type
Open
Close
Concealed
Body Materials
Rectangular
Long
Force ResistantRobust construction to resistdetermined attack.
Saw ResistantHardened steel shackle or staplenot less than 8mm diameter.
Protected SectionAvailable on a patented keysection.
Torque ResistantRigid construction to resisttwisting.
Pick ResistantLocking mechanism incorporatespick resistant device(s).
Drill ResistantSelected hardened or toughmaterials to resist drill attack.
▼
Features and Funct ions
Hardened Steel
Aluminium
LaminatedSteel
Brass
Shackle Materials
Hardened Steel
StainlessSteel
Operating Mechanism
Locking
Key Snap
Key Retention =
When the padlock is open the key cannot be removed.
Ideal for Use with: Hasps and Staples and Security Chains
Corrossion Resistant Successfully completed neutralsalt spray test.
Tamper ResistantConcealed fixings (Hasps only).
Key ControlProducts are Masterkeyble orable to be Keyed Alike.
GuaranteeGuarantee period applicablewhen used with original ChubbKeys and maintenanceinstructions followed.
Padlock Choice• Choice of padlock is based upon specific application
and the relative degree of risk associated with that location.
• These factors determine whether an open shackle, close shackle or rectangular padlock is required and whether a sprung or unsprung mechanism is preferred.
• Choice of hasp or staple is also dependent upon application and the relative degree of risk associatedwith that location.
Shackle Information
D
CNo Optional OYes ●
Rekeyable =Padlock key combination can be changed bylocal dealer.
NoYes ●
StainlessSteel
F
Type5 common types offering different clearancesand therefore different security features andapplication opportunities.
Diameter (D)
The shackle is the fixing point of the padlockand the diameter is critical to ensuring the rightlevel of security is offered and the padlock isideal for the application where it is going to be used.
Clearance (C) (F)
The clearance here is the vertical (C) or horizontal (F) clearance as shown.
Chubb, simplyfying the specification process
P4
Conquest
Hercules Brass Steel
Laminated
1K12 Page
P6
P a d l o c k s
1K57 Page
P7 1K42 Page
P7 1K941 Page
P8 1K950 Range Page
P8 1K952 Page
P8 1KD01 Page
P8
Aluminium
1K240 & 1K250Page
P9
1K840, 1K841& 1K850
Page
P9 1K600 Range Page
P10
Brass
1K360 & 1K375 Page
P101K642 & 1K652 Page
P101K730, 1K740& 1K750
Page
P11 1K401& 1K501Page
P11
1K13 Page
P6 1K22 Page
P6 1K23 Page
P6 1K23/GB Page
P6Page
P7Page
P7
Batt leship Cruiser
1K11 1K21
P5
Prot
ecte
d Se
ctio
n
Prot
ecte
d
Sect
ion
Dri
ll Re
sist
ant
Saw
Re
sist
ant
Forc
e Re
sist
ant
Pick
Re
sist
ant
Torq
ue
Resi
stan
t
Tam
per
Resi
stan
t
Key
Cont
rol
Corr
osio
n
Resi
stan
t
Gua
rant
ee
Shackle Shackle Locking Type Diameter Mechanism
SpecificationFeatures / Functions
Security Features
Shackle Material
● ● ● ● ● N/A ● H* 10
● ● ● ● ● N/A ● KA 10
● ● ● ● ● N/A ● H* 10
● ● ● ● ● N/A ● KA 10
● ● ● ● ● N/A ● H* 10
● ● ● ● N/A KA 10
● ● ● ● N/A KA 10
● ● ● ● ● N/A ● H* 10
● ● ● ● N/A ● H* 10
● ● N/A ● 5
● ● ● N/A ● 5
● ● ● ● ● N/A ● 5
● ● ● ● ● N/A ● 5
● ● ● ● ● N/A ● 5
● ● ● N/A ● 5
● N/A ● 5
● N/A ● 5
N/A 5
N/A 5
● ● N/A 5
N/A ● 5
N/A ● KA 5
N/A ● KA 5
N/A ● 5
N/A ● 5
● N/A ● 5
● N/A ● 5
● N/A ● 5
● ● N/A ● 5
● ● ● N/A ● 5
N/A ● 5
N/A ● KA 5
● N/A ● 5
● N/A ● 5
● N/A ● 5
● ● (not A)
● ●
● ● (not A)
● ●
● ●
● ● (not A)
●
●
●
●
●
●
●
●
●
Close 14mm 15mm Key
Close 14mm 15mm Key
Open 14mm 30mm Key
Open 12.5mm 30mm Key
Close 12.5mm 24mm Key
Close 12.5mm 17mm Key
Close 12.5mm 17mm Key
Concealed 16mm N/A Key
Open 8mm 24mm Key
Open 6mm 50mm Snap
Open 8mm 27mm Snap
Open 9.5mm 27mm Snap
Open 11mm 27mm Snap
Close 9mm 28mm Snap
Close 10mm 17mm Key
Open 6mm 25mm Snap
Open 9.5mm 25mm Snap
Open 6mm 22mm Snap
Open 6mm 62mm Snap
Open 9mm 26mm Snap
Open 4mm 14mm Snap
Open 5mm 19mm Snap
Open 6mm 23mm Snap
Open 6mm 62mm Snap
Close 7mm 19mm Snap
Open 8mm 30mm Snap
Close 9mm 21mm Snap
Open 9.5mm 35mm Snap
Close 10mm 12mm Snap
Close 11mm 13mm Snap
Open 5mm 18mm Snap
Open 6mm 22mm Snap
Open 8mm 29mm Snap
Open 7.5mm 25mm Snap
Open 9mm 30mm Snap
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Stainless
Stainless
●
●
●
●
●
●
●
●
●
●
●
●
●
Stainless
Stainless
Stainless
●
●
Hardened Steel
Other
Heavy Duty
P a d l o c k s
Steel
1K12C or A (Conquest)1K13C (Conquest)1K22C or A (Conquest)1K23C (Conquest)1K23C/GB (Conquest)1K11 (Battleship)1K21 (Cruiser)1K57C or A (Hercules)1K42 (Ava Brass)
1K9411K9451K9501K9601K9521KD01 (Discus)
1K2401K250
1K8401K8411K850
1K6251K6301K6401K6411K6421K6501K6521K6601K3601K3751K7301K7401K7501K4011K501
Aluminium
Laminated Steel
Key Re-Retention Keyable
Brass
Vertical (C)Shackle
Clearance
Key: H*= Masterkey grouping which only applies to the Ava versions. Non Ava are KA only.
P6
CONQUEST
CONQUEST
• Close shackle heavy duty padlock for use in the more demanding of applications.
• Key to lock, key to unlock. Double locking.
• Key retention when the padlock is unlocked.
• Hardened steel unsprung shackle.
• Close shackle heavy duty padlock with extra high shoulders providing additional protection against bolt cropper attack. Ideal for the most demanding of applications
• Key to lock, key to unlock. Double locking.
• Key retention when the padlock is unlocked.
• Hardened steel unsprung shackle.
• Open shackle heavy duty padlock for use on the majority of security applications.
• Key to lock, key to unlock. Double locking.
• Key retention when the padlock is unlocked.
• Hardened steel unsprung shackle.
• A heavy duty modular design enabling the padlock to be used as open shackle or close shackle with the ‘Shackle Guard’.
• Key to lock, key to unlock. Double locking.
• Key retention when the padlock is unlocked.
• Hardened steel unsprung shackle. Loose shackle option available.
Conquest
1K12C
1K22C
1K13C
1K23C
1K23CGB
Conquest
1K12C • 1K12A 1K13C
1K23C · 1K23C/GB
CONQUEST
CONQUEST92mm
68mm 34mm
15mm
14mm
18mm
CONQUEST
CONQUEST
111mm
68mm 34mm
14mm
18mm
CONQUEST
CONQUEST
15mm
64mm
30mm
14mm
30mm
68mm 34mm
62mm
29mm
12.5mm
30mm
65mm25mm
1K12 1K13C 1K22 1K23C 1K23C/GB
●
● (not A)
Close
14mm
15mm
Key
●
●
●
Close
14mm
15mm
Key
●
●
● (not A)
Open
14mm
30mm
Key
●
●
●
Open
12.5mm
30mm
Key
●
●
●
Close
12.5mm
24mm
Key
●
Security Features
●
●
●
●
●
N/A
●
H*
10
●
●
●
●
●
N/A
●
KA
10
●
●
●
●
●
N/A
●
H*
10
●
●
●
●
●
N/A
●
KA
10
●
●
●
●
●
N/A
●
H*
10
SawResistant
ForceResistant
PickResistant
TorqueResistant
TamperResistant
CorrosionResistant
Key Control
Guarantee
Features / Functions
Key Retention
Re-Keyable
Specification
Shackle Type
Shackle Diameter
Shackle Clearance
Locking Mechanism
Shackle Material
Hard Steel
Other
ProtectedSection
DrillResistant
P a d l o c k s
1K22C • 1K22A
P7
• Close shackle tough padlock for use on security applications.
• 6 lever mechanism, key to lock, key to unlock.
• Non-key retaining.
• Hardened steel unsprung shackle.
• Tough padlock for use in security applications.
• 5 lever mechanism, key to lock, key to unlock.
• Non-key retaining.
• Hardened steel unsprung shackle.
• Robust padlock, totally concealed when locked.
• Vertical sliding shackle which comes through the staple hole making direct attack impossible.
• Available with either Ava 10 disc or 6 pin locking mechanism.
• Key retention when the padlock is unlocked.
• Hardened steel unsprung shackle.
• Suitable for use with Chubb 7B018 and 7B020 padlocks.
• 10 disc Ava brass padlock providing a high level of protection against picking and manipulation.
• Key retention when the padlock is unlocked.• Hardened steel unsprung shackle.
Batt leship Cruiser
1K11
1K571K42
Hercules Ava Brass
1K11 1K21
1K42
1K21
95mm
27mm
17mm
12.5mm
65mm
86mm
27mm
12.5mm
74mm
110mm
25mm
42mm
50mm23mm
24mm
8mm
69mm 50mm
17mm 17mm
17mm
Close
12.5mm
17mm
Key
●
Close
12.5mm
17mm
Key
●
●
● (not A)
Concealed
16mm
N/A
Key
●
●
Open
8mm
24mm
Key
●
Security Features
●
●
●
●
N/A
KA
10
●
●
●
●
N/A
KA
10
●
●
●
●
●
N/A
●
H*
10
●
●
●
●
N/A
●
H*
10
SawResistant
ForceResistant
PickResistant
TorqueResistant
TamperResistant
CorrosionResistant
Key Control
Guarantee
Features / Functions
Key Retention
Re-Keyable
Specification
Shackle Type
Shackle Diameter
Shackle Clearance
Locking Mechanism
Shackle Material
Hard Steel
Other
ProtectedSection
DrillResistant
1K11 1K21 1K57 1K42
P a d l o c k s
1K57C • 1K57A
P8
• Open shackle steel padlocks for use on the majority of security applications.
• Snaplocking, key to unlock. Double locking. • Non -key retaining.
• Hardened steel sprung shackle, complete with unique shackle changing facility.
• Steel padlock for security applications requiring a close shackle option.
• Snaplocking, key to unlock. • Non - key retaining.
• Hardened steel sprung shackle, complete with unique shackle changing facility.
• Stainless steel padlock for medium security applications requiring a close shackle option.
• Key to lock, key to unlock.
• Key retention when the padlock is unlocked.
• Hardened steel unsprung shackle.
S teel
1K952
1K960
1KD01
Steel Discus Steel
1K941 · 1K945 · 1K950 · 1K960
1KD011K952
79mm
19mm50mm
28mm
20mm
9mm
70mm
70mm
20mm
17mm
26mm
10mm
A
B
C
D
F
E
(mm) 1K941 1K945 1K950 1K960A 45 46 46 52B 38 45 50 63C 50 27 27 27D 6 8 9.5 11E 19 19 19 25F 20 20 20 32
●
Open
6mm
50mm
Snap
●
●
Open
8mm
27mm
Snap
●
●
Open
9.5mm
27mm
Snap
●
●
Open
11mm
27mm
Snap
●
●
Close
9mm
28mm
Snap
●
●
Close
10mm
17mm
Key
●
Security Features
●
●
N/A
●
5
●
●
●
N/A
●
5
●
●
●
●
●
N/A
●
5
●
●
●
●
●
N/A
●
5
●
●
●
●
●
N/A
●
5
●
●
●
N/A
●
5
SawResistant
ForceResistant
PickResistant
TorqueResistant
TamperResistant
CorrosionResistant
Key Control
Guarantee
Features / Functions
Key Retention
Re-Keyable
Specification
Shackle Type
Shackle Diameter
Shackle Clearance
Locking Mechanism
Shackle Material
Hard Steel
Other
ProtectedSection
DrillResistant
1K941 1K945 1K950 1K960 1K952 1KD01
P a d l o c k s
P9
• Open shackle aluminium padlocks for use in the majority of applications. Ideal for use in harsh environments where corrosion resistance is of prime concern.
• Snaplocking, key to unlock. Double locking.
• Non -key retaining.
• Stainless steel sprung shackle, complete with unique shackle changing facility.
A luminium
1K250
Laminated Steel
1K240 · 1K250
(mm) 1K240 1K250A 46 46 B 38 50C 25 25D 6 9.5E 19 19F 20 20
1K840 · 1K841 · 1K850
A
B
C
D
F
E
B
C
D
F
E
1K850
A
(mm) 1K840 1K841 1K850A 36 36 39B 40 40 50C 22 62 26D 6 6 9E 22 22 25F 20 20 20
• Open shackle laminated steel padlocks for use in general applications.
• Snaplocking, key to unlock. Double locking.
• Non-key retaining • Hardened steel sprung shackle.
1K240 1K250 1K840 1K841 1K850
●
Open
6mm
25mm
Snap
Stainless
●
Open
9.5mm
25mm
Snap
Stainless
Open
6mm
22mm
Snap
●
Open
6mm
62mm
Snap
●
Open
9mm
26mm
Snap
●
Security Features
●
N/A
●
5
●
N/A
●
5
N/A
5
N/A
5
●
●
N/A
5
SawResistant
ForceResistant
PickResistant
TorqueResistant
TamperResistant
CorrosionResistant
Key Control
Guarantee
Features / Functions
Key Retention
Re-Keyable
Specification
Shackle Type
Shackle Diameter
Shackle Clearance
Locking Mechanism
Shackle Material
Hard Steel
Other
ProtectedSection
DrillResistant
P a d l o c k s
P10
• Open shackle brass padlocks for general applications.
• Snaplocking, key to unlock.
• Non -key retaining.
• Hardened steel sprung shackle.
• Close shackle brass padlocks for general applications.
• Snaplocking, key to unlock.
• Non -key retaining.
• Hardened steel sprung shackle.
• Close shackle brass padlocks for general applications.
• Snaplocking, key to unlock.
• Non -key retaining.
• Hardened steel sprung shackle.
Brass
1K660
1K642
1K360
Brass
1K625 · 1K630 · 1K640 · 1K650 · 1K660
(mm) 1K642 1K652A 52 63B 40 50C 19 21D 7 9E 14 17F 14 19
(mm) 1K360 1K375A 73 78B 43 48C 12 13D 10 11E 18 18F 18 24
(mm) 1K625 1K630 1K640 1K641 1K650 1K660A 25 28 33 33 40 42B 25 30 40 40 50 60C 14 19 23 62 30 35D 4 5 6 6 8 9.5E 12 12 14 14 16 18F 13 16 22 22 28 35
1K642 · 1K652
A
B
C
D
F
E
A
BC
DF
E
1K360 · 1K375
●
Close
7mm
19mm
Snap
●
Close
9mm
21mm
Snap
●
Close
10mm
12mm
Snap
●
Close
11mm
13mm
Snap
●
Security Features
N/A
●
5
●
N/A
●
5
●
●
N/A
●
5
●
●
●
N/A
●
5
SawResistant
ForceResistant
PickResistant
TorqueResistant
TamperResistant
CorrosionResistant
Key Control
Guarantee
ProtectedSection
DrillResistant
1K600 1K642 1K652 1K360 1K375Range
P a d l o c k s
Features / Functions
Key Retention
Re-Keyable
Specification
Shackle Type
Shackle Diameter
Shackle Clearance
Locking Mechanism
Shackle Material
Hard Steel
Other
Pleaserefer
to page 5
for details
A
B
C
D
F
E
P11
• Open shackle brass padlocks for general applications.
• Stainless steel sprung shackle, therefore ideal for use in harsh environments where anti-corrosion is of prime concern.
• Snaplocking, key to unlock.
• Non -key retaining.
• Open shackle 6 pin brass padlock for general applications, complete with black outer sleeve.
• Snaplocking, key to unlock.
• Non -key retaining.
• Hardened steel sprung shackle.
Brass Weatherproof
1K730
1K401
Brass1K401 · 1K501
1K730 · 1K740 · 1K750
(mm) 1K730 1K740 1K750A 28 33 40B 30 40 50C 18 22 29D 5 6 8E 12 15 16F 16 23 28
(mm) 1K401 1K501A 38 45B 46 55C 25 30D 7.5 9E 20 22F 24 28
A
B
C
D
F
E
A
B
C
D
F
E
1K740
Open
5mm
18mm
Snap
Stainless
Open
6mm
22mm
Snap
Stainless
Open
8mm
29mm
Snap
Stainless
Open
7.5mm
25mm
Snap
●
Open
9mm
30mm
Snap
●
Security Features
N/A
●
5
N/A
●
KA
5
●
N/A
●
5
●
N/A
●
5
●
N/A
●
5
SawResistant
ForceResistant
PickResistant
TorqueResistant
TamperResistant
CorrosionResistant
Key Control
Guarantee
Features / Functions
Key Retention
Re-Keyable
Specification
Shackle Type
Shackle Diameter
Shackle Clearance
Locking Mechanism
Shackle Material
Hard Steel
Other
ProtectedSection
DrillResistant
1K730 1K740 1K750 1K401 1K501
P a d l o c k s
P12
Door Shackle Hasp Staple Thickness Diameter Material Material
SpecificationFeatures / Functions Finishes
N/A ● ● ● N/A ● ● ● N/A 10
N/A ● ● N/A ● ● N/A 10
N/A ● ● N/A ● N/A 10
N/A ● ● N/A ● N/A 10
N/A ● ● N/A ● N/A 5
N/A N/A ● N/A 5
N/A N/A ● N/A 5
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
up to 100mm 16mm Hard Steel Hard Steel
38mm-70mm 16mm Steel Hard Steel
38mm-70mm 16mm Steel Hard Steel
38mm-70mm 16mm Steel Hard Steel
up to 40mm 11mm Hard Steel Hard Steel
up to 40mm 9.5mm Steel Hard Steel
up to 40mm 9.5mm Steel Hard Steel
●
●
●
●
Black
Black
Black
Grey Other
Padbars
H a s p s a n d S t a p l e s
Hasps & Staples
7B0207B01870077009
710071557195
Key Re-Retention Keyable
Conquest
7B020 Page
P13 7B018 Page
P13 7007 Page
P13
7009 Page
P13
Hasps & Staples
7100 Page
P14 7155 Page
P14 7195 Page
P14
Prot
ecte
d Se
ctio
n
Prot
ecte
d
Sect
ion
Dri
ll Re
sist
ant
Saw
Re
sist
ant
Forc
e Re
sist
ant
Pick
Re
sist
ant
Torq
ue
Resi
stan
t
Tam
per
Resi
stan
t
Key
Cont
rol
Corr
osio
n
Resi
stan
t
Gua
rant
ee
Security Features
H a s p s a n d S t a p l e s
P13
7009
• A high grade malleable iron padbar with a hardened steel staple.
• Secured with high tensile clutch head screws fixed through heavy duty steel thrust plates to resist unauthorised removal.
• Horizontal or vertical fitting.
• For use with padlocks up to 16mm diameter shackle.
7B018
7B020 7B018
70097007
Padbars
Padbars
7B020
26mm 32mm14mm
16mm
• A durable padbar with a hardened steel staple that bolts directly to the door.
• Horizontal fitting.
• For use with padlocks up to 16mm diameter shackle.
7007
CHUBB
CHUBB
87mm
52mm6mm 16mm
65mm
240mm 80mm
CHUBB
CHUBB
184mm 87mm
52mm16mm
6mm
80mm57mm
• An extra high security heavy duty padbar designed to complement the Conquest range of padlocks.
• Manufactured from an energy absorbent elastomeric polymer core and a special case hardened design which will minimise drill penetration.
• Rotating shackle design accommodates both vertical and horizontal shackle padlocks and prevents torque attack on padlock.
• For use with padlocks up to 16mm diameter shackle.
227mm16mm
101mm
• A durable padbar with a hardened steel staple that bolts directly to the door.
• Vertical fitting.
• For use with padlocks up to 16mm diameter shackle.
146mm 129mm
80mm
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Security Features
N/A
●
●
●
N/A
●
●
●
N/A
10
N/A
●
●
N/A
●
●
N/A
10
N/A
●
●
N/A
●
N/A
10
N/A
●
●
N/A
●
N/A
10
SawResistant
ForceResistant
PickResistant
TorqueResistant
TamperResistant
CorrosionResistant
Key Control
Guarantee
Features / Functions
Key Retention
Re-Keyable
Specification
Door Thickness
Shackle Diameter
Hasp Material
Staple Material
Finishes
Grey
Other
ProtectedSection
DrillResistant
7B020 7B018 7007 7009
up to 38mm- 38mm- 38mm-100mm 70mm 70mm 70mm
16mm 16mm 16mm 16mm
● ● ● ●
Steel Steel SteelHardSteel
Hard Hard Hard HardSteel Steel Steel Steel
H a s p s a n d S t a p l e s
P14
HA
RDENED
• A medium duty security hasp.
• Hardened steel straight bar construction.
• Suitable for left or right hand doors.
• For use with padlocks up to 11mm diameter shackle.
• A general purpose single hinge hasp.
• Fits around corners or angles or can be used on double doors.
• Suitable for left or right hand doors.
• For use with padlocks up to 9.5mm diameter shackle.
• A general purpose double hinge hasp.
• Fits around corners or angles or can be used on double doors.
• Suitable for left or right hand doors.
• For use with padlocks up to 9.5mm diameter shackle.
7100
7155
71957155
7100
Hasps and Staples
Hasps and Staples
HA
RDENED
7195
200mm
44mm
9mm32mm
HA
RDENED
112mm 77mm
43mm
10mm40mm
46mm
162mm
44mm
9mm32mm
N/A
N/A
N/A
N/A
N/A
N/A
Security Features
N/A
●
●
N/A
●
N/A
5
N/A
N/A
●
N/A
5
N/A
N/A
●
N/A
5
SawResistant
ForceResistant
PickResistant
TorqueResistant
TamperResistant
CorrosionResistant
Key Control
Guarantee
Features / Functions
Key Retention
Re-Keyable
Specification
Door Thickness
Shackle Diameter
Hasp Material
Staple Material
Finishes
Grey
Other
ProtectedSection
DrillResistant
up to up to up to40mm 40mm 40mm
11mm 9.5mm 9.5mm
Black Black Black
Steel SteelHardSteel
Hard Hard HardSteel Steel Steel
7100 7155 7195
H a s p s a n d S t a p l e s
S e c o n d a r y S e c u r i t y
Se
co
nd
ar
yS
ec
ur
ity
W i n d o w S e c u r i t y
• L o c k s f o r
H i n g e d W i n d o w s
• L o c k s f o r
S l i d i n g S a s h W i n d o w s
D o o r S e c u r i t y
• S e c u r i t y F i t t i n g s
f o r H i n g e d D o o r s
• S e c u r i t y F i i t t i n g s
f o r S l i d i n g D o o r s
SS2
Throughout the catalogue you will see a column headed.
The information shown under this heading can help you identify which products can be Keyed Alike orMasterkeyed.Many products in the Chubb Secondary Security Range have the same keying mechanism and so can beconveniently operated from a single key. Locks offering this option will either have a universal key operation ORa group code reference which matches it to otherproducts in the same group - eg. the 8K13 is a uniquekey in key control group F, so it could be keyed alike toany other product in group F, like the 8K114.
For the complete list of Chubb product keying groups,see the chart in the introduction section.
Note: We have made every effort to ensure that atthe time of going to print all information shown inthis catalogue is correct. However, in our efforts tocontinually improve our products and offer only thehighest levels of security and quality we reserve theright to make alterations to the productspecifications shown in this catalogue. Alldimensions provided within this catalogue areapproximate and for guidance only.
1
2
3
4
Drill ResistantHardened protection against drill attack.
5
6
8
9
10
11
12
Torque ResistantBuilt in strength against torque attack.
Saw ResistantHardened protection against saw attack.
Force ResistantBuilt in strength against force attack.
Pick ResistantBuilt in protection to resist picking.
Corrosion ResistantProducts conform to appropriate anti-corrosion requirements.
Tamper ResistantBuilt in protection against Tampering.
Fire ResistantProducts conform to appropriate fire testrequirements.
EscapeProducts for use on an escape door.
Key ControlThe products can be included in a keycontrol system.
GuaranteeProducts are guaranteed for a period oftime.
Protected SectionProducts are available as an option on apatented key section.
7
Security FeaturesIntroduct ion
Keys
How to Specify
Keying Groups
SecondarySecurity Index
S e c o n d a r y S e c u r i t y
• Introduction
Window Security
• Window Types
• Features and Functions
• Photo Gallery
• Range Table
• Locks for Hinged Windows
• Locks for Sliding Windows
Door Security
• Door Types
• Features and Functions
• Photo Gallery
• Range Table
Security for Hinged Doors
• Door Bolts
• Door Viewers
• Door Chains
• Hinge Bolts
Security for Sliding Doors
• Notes
SS2
SS3
SS3
SS4
SS5
SS6 - 9
SS10 -11
SS11
SS11
SS12
SS13
SS14
SS15
SS16
SS16
SS17 -18
SS19
Chubb have a very comprehensive range of highquality secondary security products to improve thesecurity on doors and windows.
Locks are available to suit wooden, metal andplastic windows that help to secure hinged orsliding window types.
Additional security fittings for all types of doors areavailable in the Chubb range. Bolts, viewers andchains are designed to fit standard hinged doorsand locks are available to secure aluminium andwooden sliding patio doors.
Chubb is accredited with and meetsthe requirements of BSEN9001
Chubb have developed a series of icons to enablethe process of product specification to besimplified.
From today you can specifically detail yourrequirements for a product, therefore ensuring thatit includes particular security features. These willgive confidence when specifying and ensure thatthe right products are used on the right application.
Example: If you require a door lock that is TamperResistant look for the screwdriver icon (7) in therange table.
Chubb, Simplifying the Specification Process.
Key Control
Products are available with orwithout keys.See the price list for details.
Trade and Mult i Pack Options
Various pack sizes and formats are available, see theprice list for details.
W i n d o w S e c u r i t y
▼
Features and Funct ions
Additional Security: On windows larger than 0.5 metre sq. it is recommended that 2 locks are fitted to help against a force attack
Tamper ResistantConcealed fixings.
Key ControlIt is possible to make locks inthe same keying group workfrom the same key.
GuaranteeGuarantee period applicablewhen used with original ChubbKeys and maintenanceinstructions followed.
Window Types
Finishes: Brass White Brown
Fitting Aids
Many products aresupplied with Ease ofFitting in mind and aresupplied with fitting aidsas standard.
Drill Bit
To help makesure your lockfixings aresecure thecorrect size bitis pre-packed.
Ventilation Position
Some locks allow the window tobe locked both in the closed andin a slightly open positionallowing ventilation.
Narrow Frame
Many Chubblocks have a bodyof 20mm or lessand are thereforesuitable for anarrow frame
Universal key means there is onestandard key that works the lock. Unique Key means that variations ofthe key shape provide a differentnumber of keys to the lock.
Universal or Unique Key
HingedCasementWindows
Sliding SashWindows
Materials
T Timber
M Metal
P PVCu
Wedge
For tapered frames awedge is supplied tosquare up the lock tothe window section.
SS3
W i n d o w S e c u r i t y
8001 Page
SS6
Locks for Hinged Windows
8K100 Page
SS6 8K101 Page
SS6 8K102 Page
SS7 8K109 Page
SS7 8K113 Page
SS7
8K118 Page
SS8
Locks for Hinged Windows
8K120 Page
SS8 8012 Page
SS8 8K106 Page
SS9 8K123 Page
SS9
8013 Page
SS9
Locks for S l iding Sash Windows
8K104 Page
SS9 8K108Page
SS10 8K114 WS1
SS4
Page
SS10Page
SS10
Window Suited toMaterial Narrow Frame
Universal/ Locking Method Locks Existing Ventilation Fitting AidsUnique Key Key Manual Automatic Fastener Position Supplied
Window SpecificationFeatures/Functions
Security Features
Case Finishes
8001 Window Bolt
8K100 Window Lock
8K101 Window Lock
8K102 Window Lock
8K109 Window Lock
8K113 Window Lock
8K118 Window Lock
8K120 Window Lock
8012 Window Lock
8K106 Window Lock
8K123 Window Lock
8013 Window Bolt
8K104 Window Bolt
8K108 Window Lock
8K114 Window Lock
WS1 Ventilation Lock
● E 10
● C 10
● B 10
● 10
● 10
● F 10
B 10
● 10
● C 10
● B 10
● B 10
D 10
● D 10
● 10
● F 10
10
Universal ●
Unique ● ● DB
Universal ●
Universal ● WED
Universal ● WED
Unique ● WED
Universal ●
Universal ● WED
Unique ● ●
Universal ● DB
Universal ● DB
Universal ●
Universal ● DB
Universal ●
Unique ● ●
Universal ● ●
T
TM ●
T ●
T ●
T ●
T ●
T ●
T ●
M ●
M ●
P ●
T ●
T ●
T
T
T
● ●
●
● ● ●
● ● ●
●
●
● ●
● ● ●
●
●
●
●
●
●
●
●
Brass White Brown
W i n d o w S e c u r i t y
Key: Fixings Supplied: WED = Wedge, DB = Drill Bit.
Tam
per
Resi
stan
t
Key
Cont
rol
Gua
rant
ee
Locks for Pivoted Windows
Locks for Sliding Sash Windows
SS5
SS6
W i n d o w S e c u r i t y
• Mortice bolt that fits into thewindow section and is shot intothe frame.
Locks for Hinged Windows
• Lock for surface fixing onto thewindow section. Bolt is thrown intothe fixed frame by turning thecatch, the bolt is then unlockedwith the key.
8K100 Window Lock
• Lock is surface fixed onto thewindow section and is lockedaround the frame fixed staple byuse of the key.
• A clenching action helps to pull thewindow to the frame.
8K101 Window Lock
8001 8K100 8K101
Universal
●
T
Unique
●
●
DB
TM
●
Universal
●
T
●
Security Features
●
E
10
●
C
10
●
B
10
Features/Functions
Universal/Unique Key
Key
Manual
Automatic
Locks Existing Fastener
Ventilation Position
Fitting Aids Supplied
Window Specification
Window Material
Suited to Narrow Frame
Case Finishes
Brass
White
Brown
●
● ●
●
●
●
8001 Window Bolt
TamperResistant
Key Control
Guarantee
LockingMethod
16 13 41
33 19
70
32
22 20
52
28 20
SS7
W i n d o w S e c u r i t y
• Lock for surface fixing to the fixedframe which is locked onto the lockplate on the window section bypushing the lock barrel.
• Easy to use ‘Push to lock’ system.• Released by key.
Locks for Hinged Windows8K102 Window Lock
• Lock is surface fixed onto thewindow section, locking into thefixed frame by use of the key.
8K109 Window Lock
• Surface fixed lock which locks onan oval locking plate with the turnof the key. Lock is mounted on thefixed frame.
8K113 Window Lock
8K102 8K109 8K113
Universal
●
WED
T
●
Universal
●
WED
T
●
Unique
●
WED
T
●
Security Features
●
10
●
10
●
F
10
Features/Functions
Universal/Unique Key
Key
Manual
Automatic
Locks Existing Fastener
Ventilation Position
Fitting Aids Supplied
Window Specification
Window Material
Suited to Narrow Frame
Case Finishes
Brass
White
Brown
●
●
●
● ●
TamperResistant
Key Control
Guarantee
LockingMethod
38
27 20
36
21 18
41
21 25
41
SS8
W i n d o w S e c u r i t y
• Lock is surface fixed onto thewindow section and is locked intothe striking plate on the fixedframe by use of the key.
• Simple and cost effective.
Locks for Hinged Windows8K118 Window Lock
• Lock is surface fitted to the fixedframe and is automatically lockedon closing the window. Thewindow and locking plate arereleased by use of the key.
8K120 Window Lock
• A surface fitted lock for securing awindow handle cockspur fastener.The lock slides into position torestrict the handle movement andis released by use of the key.
8012 Window Lock
8K118 8K120 8012
Universal
●
T
●
Universal
●
WED
T
●
Unique
●
●
M
●
Security Features
B
10
●
10
●
C
10
Features/Functions
Universal/Unique Key
Key
Manual
Automatic
Locks Existing Fastener
Ventilation Position
Fitting Aids Supplied
Window Specification
Window Material
Suited to Narrow Frame
Case Finishes
Brass
White
Brown
●
●
●
●
●
●
TamperResistant
Key Control
Guarantee
LockingMethod
38
27 20
119
19 14
17
42
21
43
1516
SS9
W i n d o w S e c u r i t y
• Lock is surface fixed onto thewindow section and is lockedaround the frame fixed staple byuse of the key.
• For use on metal windows only.
Locks for Hinged Windows
Locks for S l iding Sash Windows
8K106 Window Lock
• Lock for surface fixing onto thewindow section which is lockedaround the frame fixed staple byuse of the key.
• For use on PVCu windows only.
• The threaded lock barrel is fixed into the inner frame and thewindow is secured by locking the inner bolt into the barrel andframe using the key.
• Can also be used in hinged windows.• Screw in fitting barrel.
• The tap in fitting lock barrel is fixed into the inner frame and thewindow is secured by locking the inner bolt into the barrel andframe using the key.
• Can also be used in hinged windows.• Tap in fitting barrel and keep.
8K106 8K123 8013 8K104
Universal
●
DB
M
●
Universal
●
DB
P
●
Universal
●
T
●
Universal
●
DB
T
●
Security Features
●
B
10
●
B
10
D
10
●
D
10
Features/Functions
Universal/Unique Key
Key
Manual
Automatic
Locks Existing Fastener
Ventilation Position
Fitting Aids Supplied
Window Specification
Window Material
Suited to Narrow Frame
Case Finishes
Brass
White
Brown
● ●
● ●
TamperResistant
Key Control
Guarantee
LockingMethod
8013 Window Bolt 8K104 Window Bolt
8K123 Window Lock
52 42
28 32
61 53
49 37
35
19
64
5.5
1364
105.511
SS10
W i n d o w S e c u r i t y
Locks for S l iding Sash Windows8K108 Window Lock
• Lock is surface fixed accross thewindow sections and the case islocked to the lock plate using thekey.
• Lock is surface fitted and securedby a locking bar which locks bothwindow sections in place. The bar issecured and released by the key.
• Handy storage for locking barwhen not in use.
• One way security screws.
8K114 Window Lock
• A key operated bolt is morticedinto the outer window framewhich when locked out willprevent the inner window fromopening.
WS1 Ventilation Lock
8K108 8K114 WS1
Universal
●
T
Unique
●
●
T
Universal
●
●
T
Security Features
●
10
●
F
10 10
Features/Functions
Universal/Unique Key
Key
Manual
Automatic
Locks Existing Fastener
Ventilation Position
Fitting Aids Supplied
Window Specification
Window Material
Suited to Narrow Frame
Case Finishes
Brass
White
Brown
● ●
●
TamperResistant
Key Control
Guarantee
LockingMethod
42
24 24
74
109 26
23
21 25
48
29
4819
45
SS11
Fitting Aids
Many products aresupplied with Ease ofFitting in mind and aresupplied with fitting aidsas standard
Drill Bit
To help makesure your lockfixings aresecure thecorrect size bitis pre-packed
D o o r S e c u r i t y
Finishes:
What Type of Door ?
• A comprehensiverange of securitydevices forboth,exterior andinterior glasspanelled or soliddoors.
• Sliding Patio Doors
▼
Features and Funct ions
Brass Satin Chrome White Brown
Additional Security: Where mortice bolts and/or hinge bolts are used, 2 per door are recommended to help against a force attack.
Some products have amethod of showingwhether the lock is inthe locked orunlocked position.
Unlocked Indicator
Universal key means there is onestandard key that works the lock.Unique Key means that variationsof the key shape provide a differentnumber of keys to the lock.
Universal or Unique Key
Angle of Vision
All door viewers have a viewing area inwhich to see movement. This is measuredin degrees. Saw Resistant
Hardened pin in bolt for sawingprotection.
Drill ResistantMetal sleeve for drill protection.
Tamper ResistantConcealed fixings.
Key ControlIt is possible to make locks inthe same keying group, workfrom the same key.
GuaranteeGuarantee period applicablewhen used with original Chubbkeys and maintananceinstructions followed.
Door Types
T Timber
M Metal
P PVCu
T
M
T
P
Angle ofVision
SS12
D o o r S e c u r i t y
8002 Page
SS14
Security for Hinged Doors
8004 8006 8K117 8V001 WS8
WS9
Security for Hinged Doors
WS13 WS6 WS16 WS12 WS14
8K107 Page
SS17Page
SS17Page
SS17
Security for S l iding Doors
8K119 8K116 8K122 Page
SS18
Page
SS14Page
SS15Page
SS15Page
SS15Page
SS14
Page
SS15Page
SS16Page
SS16Page
SS16Page
SS16Page
SS15
Brass
Security Features
Dri
ll Re
sist
ant
Saw
Re
sist
ant
Tam
per
Resi
stan
t
Key
Cont
rol
Gua
rant
ee
8002 Security Door Bolt
8004 Economy Door Bolt
8006 High Security Door Bolt
8K117 Door Bolt Upgrade Cylinder
8V001 Door Viewer
WS8 Door Viewer
WS9 Door Viewer
WS13 Door Viewer
WS6 Door Chain
WS16 Door Chain and Bolt
WS12 Security Hinge Bolt
WS14 Security Hinge Bolt
8K107 Sliding Door Lock
8K119 Sliding Door Indicator Lock
8K116 Multi Purpose Door Bolt
8K122 Anti-Lift Device
Universal/ Approx. Angle Locking Method Extended Key Fitting Aids OtherUnique Key of Vision Key Manual Option Supplied Features
Door DoorMaterial Thickness mm
Door SpecificationFeatures / Functions Finish Options
● E 10
● E 10
● ● ● E 10
F 10
10
10
10
10
10
10
● 10
● 10
● KA 10
● F 10
● F 10
● 10
Univ ● ●
Univ ● ●
Univ ● ●
Uniq ●
170˚
130˚
170˚
130˚
●
●
Uniq ● DB
Uniq ● UI
Uniq ● DB OS
T
T
T
T
M,T,P 27 to 57
M,T,P 25 to 57
M,T,P 40 to 95
M,T,P 35 to 57
T
T
T
T
M
M
M,T
M,P
● White
● White
● White
● White
● ●
● ●
● ●
● ●
● ●
●
●
●
● White
●
White
Chrome Other
WhiteBrown
Security for S l iding Doors
D o o r S e c u r i t y
Key: Fittings Supplied: DB = Drill Bit Other Features: OS = One way Screws UI = Unlocked Indicator
Security for Hinged Doors
Silver
SS13
SS14
D o o r S e c u r i t y
• Mortice fixing with bolt throwing into the frame.• Lock is invisible from outside of door.
Secur ity for Hinged Doors 8002 8004 8006
Door Specification
●
E
10
●
E
10
●
●
●
E
10
Brass ● ● ●
Chrome
Other White White White
Door Material T T T
Door Thickness (mm)
Universal/Unique Key Univ Univ Univ
Approx. Angle of Vision
Key ● ● ●
Manual
Extended Key Option ● ● ●
Fitting Aids Supplied
Other Features
Finish Options
Features & Functions
Security Features8002 Security Door Bolt
• Mortice fixing with bolt throwing into the door frame.• Lock is invisible from the outside of door.• Cost effective plastic body.
8004 Economy Door Bolt
• As the 8002 with additional Security.• Hardened bolt giving added sawing protection.• Metal sleeve around key mechanism giving added
drilling protection.
8006 High Security Door Bolt
Key Control
Guarantee
DrillResistant
SawResistant
TamperResistant
LockingMethod
16 13 41
61 19
16 13 41
61 19
16 13 41
61 19
SS15
D o o r S e c u r i t y
• Provides a security upgrade from a universal key toa unique key mechanism for a mortice door bolt.
Secur ity for Hinged Doors8K117 Door Bolt upgrade Cylinder
• Adjustable to suit various door thicknesses.
WS8 Door Viewer8V001 Door Viewer
WS9 Door Viewer WS13 Door Viewer
• Adjustable to suit various door thicknesses.
• Adjustable to suit various door thicknesses.
• Adjustable to suit various door thicknesses.
8K117 8V001 WS8 WS9 WS13
Door Specification
F
10 10 10 10 10
Brass ● ● ● ● ●
Chrome ● ● ● ●
Other White
Door Material T M,T,P M,T,P M,T,P M,T,P
Door Thickness (mm) 27 to 57 25 to 57 40 to 95 35 to 57
Universal/Unique Key Unique
Approx. Angle of Vision 170˚ 130˚ 170˚ 130˚
●
Extended Key Option
Fitting Aids Supplied
Other Features
Finish Options
Features & Functions
Security Features
Key Control
Guarantee
DrillResistant
SawResistant
TamperResistant
LockingMethod
Key
Manual
33 31
60
27 - 57 17
12
25 - 57 15
12
40 - 95 30
27
35 - 57 15
12
SS16
D o o r S e c u r i t y
• Simple to install and easy to use.• Helps to hold the door in the slightly open
position, restraining against a force attack.• Helps you to identify a caller before the
door is fully released.
Secur ity for Hinged DoorsWS6 Door Chain
• Integral steel dead bolt for additional security.• Heavy Duty Chain helps protect against
cropping attack.• Safe caller identification.• Angled fixing screws help door restraint
against a force attack.• Handy chain holder supplied as
standard.
WS16 Combined Door Chain and Bolt
• Hinge bolts help keep the door in the frame on thehinged side aiding protection against a force attack.
• Recommended for use in outward opening doors.
• Hinge bolts help keep the door in the frame on thehinged side aiding protection against a force attack.
• Recommended for use in outward opening doors.
WS12 Hinge Bolts
WS6 WS16 WS12 WS14
Door Specification
10 10
●
10
●
10
Brass ● ●
Chrome ● ●
Other Satin
Door Material T T T T
Door Thickness (mm)
Universal/Unique Key
Approx. Angle of Vision
● ●
Extended Key Option
Fitting Aids Supplied
Other Features
Finish Options
Features & Functions
Security Features
Key Control
Guarantee
DrillResistant
SawResistant
TamperResistant
LockingMethod
Key
Manual
WhiteBrown
57
48
13
38
50
78
50
26
70
44
19
25
56
38 13
24
WS14 Hinge Bolts
60
SS17
D o o r S e c u r i t y
• Suitable for securing single or double aluminium sliding doors.• Simple push to lock action.• A key differing mechanism releases the lock (8K107 has 2000
key variations).• 8K107 features Tap-tite screws.
• Suitable for securing single or double aluminium sliding doors.• Simple push to lock action.• A key differing mechanism releases the lock.
Secur ity for S l iding Doors8K107 Sliding Door Lock
• Suitable for securing single or double aluminium sliding doors by means of the steel locking bar.
• Also suitable for hinged doors. • Simple push to lock action.• A key differing mechanism releases the bar from the frame.• Screws suitable for timber or metal doors supplied as standard.
8K119 Indicator Lock
8K116 Multi Purpose Door Bolt
8K107 8K119 8K116
Door Specification
KA
10
F
10
●
F
10
Brass
Chrome ● ●
Other White
Door Material M M M,T
Door Thickness (mm)
Universal/Unique Key Unique Unique Unique
Approx. Angle of Vision
●
● ● ●
Extended Key Option
Fitting Aids Supplied DB
Other Features UI OS
Finish Options
Features & Functions
Security Features
Key Control
Guarantee
DrillResistant
SawResistant
TamperResistant
LockingMethod
Key
Manual
WhiteBrown
28
30
22
30
36
30
52
8
10
41
30
26
144
30
82
69
25
18
23
SS18
D o o r S e c u r i t y
Security for S l iding Doors8K122 Anti-Lift Device
8K122
Door Specification
●
10
Brass
Chrome
Other
Door Material M,P
Door Thickness (mm)
Universal/Unique Key
Approx. Angle of Vision
Extended Key Option
Fitting Aids Supplied
Other Features
Finish Options
Features & Functions
Security Features
Key Control
Guarantee
DrillResistant
SawResistant
TamperResistant
LockingMethod
Key
Manual
White
• Helps to prevent sliding patio doors from being lifted out of theirframes.
• Easy to install.
• Variable thickness feature to enable fitting in most applications.
77
20
10
55
15
• For applications where extended key lengths would be useful packs of extra long keys are available, see the price list for details.
Extra Length Keys
• Many locks in the Chubb range have interchangeable keys andso can be conveniently operated from a single key. Locksoffering this option will have either a universal key operationOR a key alike reference which matches it to other products inthe same group; eg. the 8K113 is a unique key, in key alikegroup F, so it could be keyed alike to any other product in groupF, like the 8K114.
• For the complete list of Chubb product keying groups, see thechart in the introduction section.
Keying Groups
Variat ions
Ac
ce
ss
Co
nt
ro
l
A c c e s s C o n t r o l
Ac
ce
ss
Co
nt
ro
l
• M o t o r i s e d L o c k s
• S o l e n o i d L o c k s
• E l e c t r o n i c S t r i k e s
• M a g n e t i c L o c k s
• R e a d e r s
• A c c e s s o r i e s
AC2
Note: We have made every effort to ensure that atthe time of going to print all information shown inthis catalogue is correct. However, in our efforts tocontinually improve our products and offer only thehighest levels of security and quality we reserve theright to make alterations to the productspecifications shown in this catalogue. Alldimensions provided within this catalogue areapproximate and for guidance only.
1
2
3
4
Drill ResistantHardened protection against drill attack.
5
6
8
9
10
11
12
Torque ResistantBuilt in strength against torque attack.
Saw ResistantHardened protection against saw attack.
Force ResistantBuilt in strength against force attack.
Pick ResistantBuilt in protection to resist picking.
Corrosion ResistantProducts conform to appropriate anti-corrosion requirements.
Tamper ResistantBuilt in protection against Tampering.
Fire ResistantProducts conform to appropriate fire testrequirements.
EscapeProducts for use on an escape door.
Key ControlThe products can be included in a keycontrol system.
GuaranteeProducts are guaranteed for a period oftime.
Protected SectionProducts are available as an option on apatented key section.
7
Security FeaturesIntroduct ion How to Specify
Standards & Approvals
Access Control Index
• Introduction
• Motorised LocksFeatures and FunctionsPhoto GalleryRange TableMotorised LocksControl Unit
• Solenoid LocksFeatures and FunctionsPhoto Gallery & Range TableSolenoid Locks
• Electric StrikesFeatures and FunctionsPhoto Gallery & Range TableMortice StrikesRim Strikes
• Magnetic LocksFeatures and FunctionsPhoto GalleryRange TableSurface Mounted LocksFlush Mounted locksBrackets
• ReadersFeatures and FunctionsPhoto GalleryRange TableKeypadsCard ReadersProximity ReadersReader Cards
• AccessoriesDoor LoopPower SupplyRelease Button
• Notes
AC2
AC3AC4AC5AC6AC6
AC7AC8AC9
AC10AC11AC12AC12
AC13AC14AC15
AC16-17AC17AC18
AC19AC20AC21AC22AC23AC23AC24
AC25
AC26-27
Chubb offers a very comprehensive range of AccessControl products. They cover readers and locks,which together open up many options forelectronically controlling peoples access.Keypads, Cardswipes and Proximity readers offermethods of entry control which require people topunch in an access code, swipe a reader card oroffer up a proximity card or tag.The locks are available as motorised and solenoidvariants that automatically withdraw the bolt.Electronic strikes which allow the release of amortice or rim locks’ bolt from the frame. Magnetic force that use magnetic force to lock thedoor.
Chubb is accredited with and meets therequirements of BS EN ISO 9001: 1994
Chubb have developed a series of icons to enablethe process of product specification to besimplified.
From today you can specifically detail yourrequirements for a product, therefore ensuring thatit meets a particular standard or approval.
In addition you can now ask for specific securityfeatures to be included in the product you specify.
Example: If you require a keypad reader that hastamper resistance look for the screw driver icon(number 7) in the range.
Chubb, Simplifying the Specification Process.
A c c e s s C o n t r o l
The application of the CE mark is currentlyrestricted to products covered by the lowvoltage and EMC Directives.
Magnetic Locks Readers Accessories
Motorised Locks Solenoid Locks Electric Strikes
A c c e s s C o n t r o l - M o t o r i s e d L o c k s
▼
Features and Funct ions
Ideal for Use with: Keypad / Cardswipe / Proximity Readers.
Corrosion Resistant Successfully completed a 96hour salt spray test.
What Type of Door ?
• A comprehensive range of locks for both exterior and interior solid timber doors.
• Can be used with outward opening doors.
• This is the measurementfrom the edge of thedoor to the centre of thekeyhole.
Edgeof doorBackset
Finish: Chrome Plated
Control Output
The locks are permanentlycontrolled by the control unitwhich supplies the open andclose commands.
Monitored Bolt
The bolt position ismonitored to allow thecontrol unit to identifythe lock status.
Key Overide
At any time the bolt canbe withdrawn or thrownby a key when a Europrofile cylinder is fittedto the lock.
Auto Re-Lock
If the door is in the closedposition and has notbeen opened after anopen command the boltwill automatically re-lock.
Alignment Locator
To make sure the bolt isalways thrown into thestrike, a specialalignment locator isfitted to the lockfaceplate and the strike.
RTE Input
A Request To Exit switchcan be connected to thecontroller.
Anti-Side Load
This feature prevents pressureapplied to the door beingtransferred to the boltcreating excess friction.
Bolt Options
Deadbolt
Swingbolt
DB
SB
GuaranteeGuarantee period applicablewhen used with original ChubbCylinders and maintenanceinstructions followed.
Input Voltage
All chubb motorised locks operateon a 12Vdc power supply.
Any loss of electrical powerwill leave the lock in one oftwo modes:
Fail LockedDoor remains locked untilpower is applied.
Fail Unlocked Door remains unlockeduntil power is applied.
Power Failure Mode
What i s Backset?
FL
FU
ASL
AC3
Door Types
T Solid Timber
M Metal
P PVCu
Products carrying the CE markcomply to the requirements
of the CE regulations.T
A c c e s s C o n t r o l - M o t o r i s e d L o c k s
CMLS1 Page
AC6
CMLC1
CPS5
Motorised Locks
Power Supply
Control Unit
CMLD1 Page
AC6
Page
AC6
Page
AC25
AC4
Bolt Throw Input Output Lock/Strike Automatic Key Monitored Power Othermm Volatge Voltage Peak Holding Alignment Re-Locking Overide Bolt Failure Mode Features
Case Case Face Plate BacksetDepth Width Width
Door Features
Door Features
Features / Functions
Features / Functions
Standards Finish Options
●
●
●
●
● 5
● 5
5
1
40 12Vdc 4A n/a ● 1 Sec. ● ● FL
30 12Vdc 4A n/a ● 1 Sec. ● ● FL ASL
N/A 12Vdc 12Vdc 4A 80mA ● ● ACCS ● BBF ●
N/A 240Vac 12Vdc BBF 5A
32mm 29mm 30mm 20mm
82mm 25mm 30mm 50mm
55mm 125mm 85mm
80mm 330mm 330mm
●
●
●
●
White ChromeA c c e s s C o n t r o l
Motorised Locks
Security Features
CMLS1 Mortice Swing Bolt
CMLD1 Mortice Dead Bolt
CMLC1 Single Door Unit
CPS5 Power Supply
Control Units
Power Supply
Current Consumption
Bolt Throw Input Output Open Signal Open Close Fault Other RTEmm Voltage Voltage Peak Holding Input Command Command Signal Features Input
Output Output Output
Current Consumption
Features / Functions
Bolt Throw Input Output Other Currentmm Voltage Voltage Features Ouput
Corr
osio
n
Resi
stan
t
Gua
rant
ee
Key: ASL = Anti -Side Load ACCS = Automatic Continuous Close Signal BBF = Battery Backup Function FL = Fail Locked
Case Case Case Depth Width Height
AC5
A c c e s s C o n t r o l - M o t o r i s e d L o c k s
• For use on single doors where bolt release is to beelectronically controlled.
• Must be used with the controller unit.
Motorised Locks
Control Unit
CMLS1 Mortice Swing Bolt CMLD1 Mortice Dead Bolt
• Used for controlling the Motorised Locks.• Option to run off of battery back-up in case of power failure• Connection to Access Control Reader device available such as
a keypad for external operation.• Automatic Continuous Close Signal sent to the lock, and close
signal sent after 8 seconds if the open command is sent butthe door is not opened.
• Connection to request to exit button available for internaloperation.
• Emergency status output.• For connection to an external alarm device (eg a sounder).
CMLC1 Single Door Unit
• For use on single doors where bolt release is tobe electronically controlled.
• Must be used with the controller unit.
White
Chrome
CMLS1 CMLD1 CMLC1
Standards
Security Features
● ● ●
● ●
Features/Functions
Bolt Throw (mm)
Input Voltage
Output Voltage
Peak
Holding
Lock/Strike Alignment
Automatic Re-locking
Key Overide
Monitored Bolt
Power Failure Mode
Open Signal Input
Open Command Output
Close Command Output
Fault Signal Output
Other Features
RTE Output
Door Features
Case Depth (mm)
Case Width(mm)
Face Plate Width (mm)
Backset (mm)
40
12Vdc
12Vdc
4A
n/a
●
1 Sec.
●
●
FL
n/a
n/a
n/a
n/a
n/a
32
29
30
20
●
30
12Vdc
12Vdc
4A
n/a
●
1 Sec.
●
●
FL
n/a
n/a
n/a
n/a
ASL
n/a
82
25
30
50
●
n/a
12Vdc
12Vdc
4A
1
n/a
n/a
n/a
n/a
n/a
●
●
ACCS
●
BBF
●
55
125
●
Guarantee
CorrosionResistant
Current Consumption
5 5 5
Finish OptionsChrome
29mm
216mm129mm
14mm
236.5mm
151mm
111mm
129mm
440mm
66mm17mm
75mm
35mm
40mm
3mm30mm
29mm
3mm82mm
440mm
232mm
82mm
49mm3mm
30mm
140
30mm
17mm
111mm
30mm
12mm
70mm
30mm
50mm
AC6
125mm 55mm
85mm
A c c e s s C o n t r o l - S o l e n o i d L o c k s
▼
Features and Funct ions
Ideal for Use with: Keypad / Cardswipe / Proximity Readers.
Escape The fail Unlocked version of thislock is ideal for use on escapedoors if used with a microswitched panic bar.
Corrosion Resistant Successfully completed a 96hour salt spray test.
What Type of Door ?• A comprehensive range of locks for both exterior
and interior doors.
• Variants available for outward opening doors.
GP = Glass Panelled M = P = PVCu T = Timber
What i s Backset?
• This is the measurementfrom the edge of thedoor to the centre of thekeyhole.
Edgeof doorBackset
Finish: Chrome
Monitored Bolt
The bolt position is monitoredto allow the control unit toidentify the lock status.
Key Overide
At any time the bolt canbe withdrawn or thrownby a key when a Europrofile cylinder is fittedto the lock.
Auto Re-Lock
If the door is in the closedposition and has not beenopened after an opencommand the bolt willautomatically re-lock.
RTE Input
A Request To Exit switchcan be connected to thecontroller.
Door Status
Built in Magnetic contactsenses the door open / closedstatus for bolt re-locking.
Bolt Options
Deadbolt
Latchbolt
DB
LB
GuaranteeGuarantee period applicablewhen used with original ChubbCylinders and maintenanceinstructions followed.
Input Voltage
All Chubb soleniod bolts operateon a 12Vdc power supply.
Any loss of electrical powerwill leave the lock in one oftwo modes:
Fail LockedDoor remains locked untilpower is applied.
Fail UnlockedDoor remains unlockeduntil power is applied.
Power Failure Mode
Power Rating
The lock is continuously ratedallowing the lock to be held inthe constantly open position.
FL
FU
AC7
Door Types
T Solid Timber
M Metal
P PVCu
Products carrying the CE markcomply to the requirements
of the CE regulations.
T M P
Input Output Other CurrentVolatge Voltage Features Output
Case Case Case Depth Width Height
Door FeaturesFeatures / FunctionsStandards FinishOptions
White
Security Features
osio
n
Resi
stan
t
Gua
rant
ee
Solenoid Bolts
A c c e s s C o n t r o l - S o l e n o i d L o c k s
Bolt RTE Input Power Open Automatic Key Monitored Power OtherThrow Input Voltage Peak Holding Rating Signal Re-Locking Overide Bolt Failure Features(mm) Input Mode
Case Case Face Plate BacksetDepth Width Width
Door FeaturesFeatures / FunctionsStandardsFinish
Options
●
●
●
● 1
● ● 1
● 1
22 ● 12/24Vdc 3A/1.8A 250mA C ● 1 Sec. ● ● FL
22 ● 12/24Vdc 3A/1.8A 250mA C ● 1 Sec. ● ● FU
16.5 ● 12/24Vdc 3A/1.8A 250mA C ● 6 Sec. ● ● FL
35mm 22mm 25mm 25mm
35mm 22mm 25mm 25mm
35mm 22mm 25mm 25mm
●
●
●
ChromeA c c e s s C o n t r o l
Solenoid Locks
Security Features
CSDB100 Mort. Solenoid D/Bolt
CSDB100U Mort. Solenoid D/Bolt
CSLB200 Mort. Solenoid L/Bolt
CPS3 Power Supply
Current Consumption
Corr
osio
n
Resi
stan
t
Esca
pe
Gua
rant
ee
Power Supply
Page
AC25
Key: FL = Fail Locked FU = Fail Unlocked C = Constant
Key: BBF = Battery Backup Function
● 5 80mm 250mm 215mm ●
Power Supply
CPS3Page
AC9CSDB100 • CSDB100U Page
AC9CSLB200
240Vac 12Vdc BBF 3A
AC8
• For use on a single door where bolt releaseis to be electronically controlled.
• Narrow style lock case.
• Connection to an access control readerdevice , such as a keypad, for externaloperation.
• Connection to a request to exit button forinternal operation.
• CSBD100 - Fail Locked.
• CSBD100U - Fail Unlocked.
• For use on a single door where bolt releaseis to be electronically controlled.
• Narrow style lock case.
• Connection to an access control readerdevice , such as a keypad, for externaloperation.
• Connection to a request to exit button forinternal operation.
• Fail Locked.
Solenoid Locks CSDB100 CSDB100U CSLB200
Standards
Security Features
● ● ●
● ● ●
●
Features/Functions
Bolt Throw (mm)
RTE Input
Input Voltage
Peak
Holding
Power Rating
Open Signal Input
Automatic Re-Locking
Key Overide
Monitored Bolt
Power Failure Mode
Other Features
Door Features
Case Depth (mm)
Case Width(mm)
Face Plate Width (mm)
Backset (mm)
20
●
12/24Vdc
3A/1.8A
250mA
C
●
1 Sec.
●
●
FL
35
22
25
25
●
20
●
12/24Vdc
3A/1.8A
250mA
C
●
1 Sec.
●
●
FU
35
22
25
25
●
18
●
12/24Vdc
3A/1.8A
250mA
C
●
6 Sec.
●
●
FL
35
22
25
25
●
Finish Options
Chrome
CSDB100 • CSDB100U Mortice Solenoid Deadbolt
Guarantee
A c c e s s C o n t r o l - S o l e n o i d L o c k s
CorrosionResistant
Escape
Current Consumption
CSLB200 Mortice Solenoid Latch Bolt
1 1 1
160mm21mm
25mm2.5mm
52mm
45mm
320mm
230mm
45mm
25mm
35mm
25mm
35mm
25mm
22mm
22mm
94.6
44.4
160mm21mm
25mm2.5mm
52mm
45mm
320mm
230mm
45mm
25mm
18mm18mm
16.5mm
22mm
94.6
44.4
AC9
▼
Features and Funct ions
IDEAL FOR USE WITH: Mortice Locks, Rim Locks, Keypad / Cardswipe / Proximity Readers
Tamper ResistantWhen the door is locked, allfixings are hidden.
Force ResistantStrong bolt design providesresistance to side load force.
Finishes:
Input Voltage
All Chubb strikes operate on a12Vdc power supply.
Any loss of electrical power willleave the strike in one of twomodes:
Fail LockedDoor remains locked until power isapplied.
Fail UnlockedDoor remains unlocked until poweris applied.
Power Failure Mode
Release Operation
Connection of a reader, suchas a keypad, allows the striketo be released on entry.
Handing
All Chubb strikes arereversible to suit either left orright handed doors.
Power Rating
The strike is continuouslyrated allowing it to be held inthe constantly open position.
A c c e s s C o n t r o l - E l e c t r i c S t r i k e s
What Type of Door ?
Operat ion
• A comprehensive range of strikes for both exterior and interior doors.
• When the strike is released it allows the door to be pushed, forcing the bolt of the strike to open.
Escape The fail Unlocked version of thisstrike is ideal for use on escapedoors if used with a microswitched panic bar.
Corrosion Resistant Successfully completed a 96hoursalt spray test.
GuaranteeGuarantee period applicablewhen Chubb maintenanceinstructions are followed.
Dark Metallic Grey Brass
FL
FU
Holding Force
A measurement is given (kg)for the amount of sideload anelectric strike will take andhold the door locked.
AC10
Door Types
T Solid Timber
M Metal
P PVCu
Products carrying the CE markcomply to the requirements
of the CE regulations.
T M P
CMES400 • CMES400U Page
AC12
Electr ic Str ikes
A c c e s s C o n t r o l - E l e c t r i c S t r i k e s
Door Features
Features / FunctionsStandards
●
●
●
●
REV
REV
REV
REV
●
●
●
●
●
●
Brass
Finish Options
DMGA c c e s s C o n t r o l
Electr ic Str ikes
Security Features
CMES400 Mort. Electric Strike
CMES400U Mort. Electric Strike
CRES100 Rim Electric Strike
CRES100U Rim Electric Strike
Current Consumption
Corr
osio
n
Resi
stan
t
Tam
per
Resi
stan
t
Forc
e Re
sist
ant
Esca
pe
Gua
rant
ee
Key: FL = Fail Locked FU = Fail Unlocked REV = Reversible Handing C = Constant
Input Power Open Signal Holding Power OtherVoltage Peak Holding Rating Input Force Failure Mode Features
Handing
●
●
●
●
InwardOpening
● ● ● 1
● ● ● ● 1
● ● ● 1
● ● ● ● 1
CRES100 • CRES100U Page
AC12
12/24Vdc 300mA 300mA C ● 400kg FL
12/24Vdc 300mA 300mA C ● 400kg FU
12/24Vdc 300mA 300mA C ● 380kg FL
12/24Vdc 300mA 300mA C ● 380kg FU
AC11
• For use with a mortice latch.
• Continuously rated.
• For inward opening door applications.
• Metal shroud around release latch for tidyinstallation.
• CMES400 - Fail Locked.
• CMES400U - Fail Unlocked.
• For use with a rim nightlatch.
• Continuously rated.
• For inward opening door applications.
• CRES100 - Fail Locked.
• CRES100U - Fail Unlocked.
E lectr ic Mort ice Str ikes
Electr ic Rim Str ikes
CMES400 • CMES400U
CRES100 • CRES100U
A c c e s s C o n t r o l - E l e c t r i c S t r i k e s
CMES400 CMES400U CRES100 CRES100U
Standards
Security Features
● ● ● ●
● ● ● ●
1 1 1 1
Features/Functions
Input Voltage
Peak
Holding
Power Rating
Open Signal Input
Automatic Locking
Side Load ForceResistance
Power Failure Mode
Other Features
Door Features
Handing
Inward Opening
12Vdc
300mA
300mA
C
●
1 Sec
400kg
FL
REV
REV
●
12Vdc
300mA
300mA
C
●
1 Sec
400kg
FU
REV
REV
●
12Vdc
300mA
300mA
C
●
1 Sec
380kg
FL
REV
REV
●
12Vdc
300mA
300mA
C
●
1 Sec
380kg
FU
REV
REV
●
Finishes
DMG
Brass
Guarantee
ForceResistant
● ● ● ●Tamper
Resistant
● ● ● ●CorrosionResistant
● ●Escape
Current Consumption
30 mm
28 mm10 mm
150 mm69 mm
16 mm
30 mm
47 mm63 mm
31 mm28 mm
106 mm80 mm
104 mm40 mm
AC12
▼
Features and Funct ions
IDEAL FOR USE WITH: Keypad / Cardswipe / Proximity Readers
Door Types
Instal lat ion Options
Finishes: Satin Silver Anodised
Input Voltage
Single voltage units accept a12Vdc power supply.
Dual voltage units accept eithera 12Vdc or 24Vdc power supply.
Magnets are available in two states:
MonitoredA 2 wire output from a 24v, 1amp volt free changeover contact allows a signal to be sent to a relay orcontrol device to show that the magnet is in thefully locked or unlocked state (hall effect).
UnmonitoredNo signal is available to show the status of magnet.
Monitoring
Fixing Brackets
A range of brackets andaccessories are availableto suit most applications.
Holding Force
A measurement is given (in kgs)for the amount of direct force amagnetic lock will take and holdthe door locked.
Surface MountMagnet is fixed to the doortransom.
Flush MountMagnet is morticed into thedoor and frame or transom.
Fixing Types
M
U
Corrosion Resistant Successfully completed a 96hrsalt spray test.
A c c e s s C o n t r o l - M a g n e t i c L o c k s
Z & L Brackets forinward openingapplications.
Adjustable TransomBracket for applicationswith a narrow frame orno frame reveal.
Any loss of electrical powerwill leave the magnet in thefail unlocked state.
Power Failure Mode
GuaranteeGuarantee period applicablewhen Chubb maintenanceinstructions are followed.
Escape The Magnetic Locks are ideal foruse on escape doors if used witha micro switched panic bar.
Single Door
Double Door
Single Door with FullWidth Housing
Frame 100mm wide
Outward Opening Outward Opening
Outward Opening Inward Opening
Door
Frame 75mm wide
Door
Frame 50mm wide
Adjustabletransombracket
Door
Frame
DoorZ bracket
AC13
Products carrying the CE markcomply to the requirements
of the CE regulations.
CM1SSU • CM1SSM Page
AC16
Magnetic Locks - Surface Mounted
CM1DSU • CM1DSM
CM2SSU-1M • CM2SSM-1M
Magnetic Locks - Surface Mounted Shear Locks - F lush Mounted
CM3SSU • CM3SSM CM4SSM • CM4SFM
A c c e s s C o n t r o l - M a g n e t i c L o c k s
Page
AC16Page
AC17
Page
AC16
Page
AC17
Page
AC17
CM2DSU-2M • CM2DSM-2M
AC14
A c c e s s C o n t r o l - M a g n e t i c L o c k s
Holding Monitoring Type Input Voltage Current Consumption (Per Coil) PowerForce (kg) Failure Mode
Fixing Type Case Case CaseSurface Flush Length Height
Door FeaturesFeatures / FunctionsStandardsFinish
Options
●
●
●
●
●
●
●
●
●
●
●
●
● ● 5
● ● 5
● ● 5
● ● 5
● ● 5
● ● 5
● ● 5
● ● 5
● ● 5
● ● 5
● ● 5
● ● 5
Up to 310 ● 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU
Up to 310 ● 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU
Up to 310 ● 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU
Up to 310 ● 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU
Up to 310 ● 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU
Up to 310 ● 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU
Up to 310 ● 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU
Up to 310 ● 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU
Up to 630 ● 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU
Up to 630 ● 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU
Up to 1000 ● 12Vdc/24Vdc 900mA/1200mA 450mA/280mA FU
Up to 1000 ● 12Vdc/24Vdc 900mA/1200mA 450mA/280mA FU
● 280mm 33mm 44mm
● 280mm 33mm 44mm
● 540mm 33mm 44mm
● 540mm 33mm 44mm
● 1000mm 33mm 44mm
● 2000mm 33mm 44mm
● 2000mm 33mm 44mm
● 2000mm 33mm 44mm
● 267mm 73mm 40mm
● 267mm 73mm 40mm
● 180mm 30mm 25mm
● 180mm 30mm 25mm
●
●
●
●
●
●
●
●
●
●
●
●
SatinSilver
Anodised
A c c e s s C o n t r o l
Magnetic Locks
Security Features
CM1SSU1M Single Magnet
CM1SSM Single Magnet
CM1DSU2M Double Magnet
CM1DSM Double Magnet
CM2SSU-1M Single Magnet
CM2SSM-1M Single Magnet
CM2DSU-2M Double Magnet
CM2DSM-2M Double Magnet
CM3SSU Single Magnet
CM3SSM Single Magnet
CM4SSM Single Shear Magnet
CM4SSM Single Shear Magnet
Monitored Unmonitored Peak Holding
Corr
osio
n
Resi
stan
t
Esca
pe
Gua
rant
ee
Key: FU = Fail Unlocked
AC15
Magnetic Locks - Surface Mounted
CM1DSU • CM1DSM
CM2SSU-1M • CM2SSM-1M
CM1SSU • CM1SSM
• For use on single doors.
• Surface mount (super mini) design.
• Variable cable entry position.
• Suits Inward and outward openingdoors.
• Dual voltage capability.
• CM1SSU - Unmonitored.
• CM1SSM - Monitored.
• For use on double doors.
• Surface mount (super mini) design.
• Variable cable entry position.
• Suits Inward and outward opening doors.
• Dual voltage capability.
• CM1DSU - Unmonitored.
• CM1DSM - Monitored.
• For use on single doors.
• Surface mount (super slim) design.
• 1m housing length for full doorwidth fitting.
• Suits Inward and outward openingdoors.
• CM2SSU - Unmonitored.
• CM2SSM - Monitored.
A c c e s s C o n t r o l - M a g n e t i c L o c k s
CM1SSU/M CM1DSU/M CM2SSU-1M/M
Standards
Security Features
● ● ●
● ● ●
● ● ●
5 5 5
● ● ●
Features/Functions
Hoding Force (kg)
Monitored
Unmonitored
Input Voltage
Peak
Holding
Power Failure Mode
Other Features
Door Features
Surface
Flush
Case Length (mm)
Case Height (mm)
Case Depth (mm)
Up to 310
●
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
280
33
44
Up to 310
●
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
540
33
44
Up to 310
●
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
1000
33
44
Finish Options
Satin Silver Anodised
Guarantee
CorrosionResistant
Escape
MonitoringType
CurrentConsumption(Per Coil)
540
1000
272
12
1212
12
40
40 40
40
44
44
44
33
33
33
44
44
44
AC16
Magnetic Locks - Surface Mounted
Shear Locks - F lush Mounted
CM3SSU • CM3SSM
CM4SFU • CM4SFM
CM2DSU-2M • CM2DSM-2M
• For use on double doors.
• Surface mount (super slim) design.
• 2m housing length for full doorwidth fitting.
• Suits Inward and outward openingdoors.
• CM2DSU-2M - Unmonitored.
• CM2DSM-2M - Monitored.
• For use on single doors.
• Surface mount (super power) design.
• Unmonitored.
• Suits Inward and outward openingdoors.
• CM3SSU - Unmonitored.
• CM3SSM - Monitored.
• For use on single or double doors.
• Flush mount (shear force) design forimproved holding force (1000kg ofshear force).
• Suitable for Inward or outwardopening doors or bi-directional doors.
• Can be fitted in the horizontal orvertical axis.
• CM4SSM - Surface Mount.
• CM4SFM - Flush Mount.
A c c e s s C o n t r o l - M a g n e t i c L o c k s
CM2DSU-2M/M CM3SSU/M CM4SSM/FM
Standards
Security Features
● ● ●
● ● ●
● ● ●
5 5 5
● ● ●
Features/Functions
Hoding Force (kg)
Monitored
Unmonitored
Input Voltage
Peak
Holding
Power Failure Mode
Other Features
Door Features
Surface
Flush
Case Length (mm)
Case Height (mm)
Case Depth (mm)
Up to 310
●
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
2000
33
44
Up to 630
●
●
12Vdc/24Vdc
250mA/500mA
250mA/500mA
FU
●
267
73
40
Up to 1000
●
12Vdc/24Vdc
900mA/1200mA
900mA/1200mA
FU
CM4SSM
CM4SFM
163
30
25
Finish Options
Satin Silver Anodised
Guarantee
CorrosionResistant
Escape
MonitoringType
CurrentConsumption(Per Coil)
2000
44
4040
44
12 12
33
267
73 73
40
63
12
163mm
163mm
30mm
30mm
25mm
25mm
AC17
Magnetic Lock Brackets & Accessor ies
• Suitable for use on inward opening doors.
• CZB1 - For use with CM1 and CM2 magnets.
• CZB3 - For use with CM3 magnets.
• CLB1 - For use with CM1 and CM2 magnets.
• CLB3 - For use with CM3 magnets.
A c c e s s C o n t r o l - M a g n e t i c L o c k s
• Bracket allows adjustable positioning of the magnet.
• Suitable for applications witha flush door and a framewith little or no reveal.
• Adhesive for glass mounting.
(CMADHESIVE)
(CMACTIVATOR)
Adjustable Transom Bracket Accessories
Z and L Brackets
A
A
A
C
C
C
D
B
B
B
Z Bracket A B C D
CZB1 190mm 50mm 50mm 100mm
CZB3 190mm 75mm 75mm 150mm
L Bracket A B C
CLB1 250mm 50mm 38mm
CLB3 266mm 75mm 38mm
Adjustable Transom Bracket A B C
CADJTB for CM1, 2+3 266mm 50mm 38mm
AC18
▼IDEAL FOR USE WITH: Motorised Locks, Solenoid Locks, Electric Strikes, Magnetic Strikes.
Tamper ResistantSecurity screws and anti-tamperswitches help secure the units.
Corrosion ResistantSuccessfully completed testingto ISP53 weather protection.
GuaranteeGuarantee period applicablewhen used with original Chubbcards, tags and maintenanceinstructions followed.
Finishes:
Input Voltage
All chubb Readers operateon a 12Vdc power supply.
Programming the readers isachieved via the keypad or with useof the program card.
Programming Method
Non Volatile Memory
This means the programmedinformation in the reader isretained in the event ofpower loss.
Products carrying the CE markcomply to the requirements of
the CE regulations.
Number of Users
Each system has a limitof programmablecodes for users.
RTE Input
Connection of aRequest to Exit switchwill allow for instantegress operationwithout the use of acard, code or tag.
Alarm Output
The connection of awarning device (a bell)allows the output totrigger it in the event of analarm status.
Hold Open
The reader can send anoutput signal to hold thedoor in the open position fora required length of time.
Power Failure Mode Capability
Readers can support fail lockedand fail unlocked systems.
Features and Funct ions
There are two levels ofoperation:
MasterThe reader operatesstand alone.
SlaveThe reader is ‘dumb’ andrequires connection to amaster controller.
Hierarchy
Visual DisplayLED’s show the status ofthe reader.
Audible DisplayTones announce thestatus of the reader.
Status Display
Cardswipe Reader
Pre-encoded magnetic stripe cards controlaccess.
Keypad
Push button coded entry controls access.
Proximity Reader
Pre-encoded cards or tags placed near thereader control access.
Reader Systems
A c c e s s C o n t r o l - R e a d e r s
Dark Metallic Grey Dark Grey
AC19
CEK200
Keypads
CPX100
Proximity Reader
CPX10UCP • CPX10MC • CPX10T • CICP • CUCP • CCPC
Cards and Tags
CIK100 • CSK150 CMC400 • CSC450
Card readers
A c c e s s C o n t r o l - R e a d e r s
Page
AC22Page
AC22Page
AC23
Page
AC23Page
AC24
AC20
A c c e s s C o n t r o l - R e a d e r s
DoorFeatures
Standards
●
●
●
● ●
●
5
5
5
●
●
●
Numberof Users
HierachyMaster Slave
ProgrammingMethod
Keypad Card
InputVoltage
Features/Functions
4 codes
4 codes
4000
●
●
●
●
●
●
●
●
●
●
●
● ●
CurrentConsumptionPeak Hold
HoldOpen
Output
RTEInput
40mA
40mA
90mA
40mA
40mA
90mA
●
●
●
●
●
●
12Vdc
12Vdc
n/a
Lock releaseTime
Output
●
●
●
●
●
AlarmOutput
●
●
3, out
3, out
3, out
Contact
Contact
Contact
IncorrectCode
Lockout
ReaderRange
DoorContact
Monitoring
12Vdc
12Vdc
12Vdc
A c c e s s C o n t r o l
Keypad
Security Features
CEK200 External Keypad
CIK100 Internal Keypad
CSK150* Slave Keypad
Power Failure Compatability
FL FU
Finish Options
●
●
●
●
●
●
●
●
●
5
5
●
●
10
10
4000
4000
●
●
●
●
●
●
●
●
40mA
30mA
40mA
30mA
●
●
●
●
12Vdc
12Vdc
●
●
3, out
3, out
Contact
Contact
12Vdc
12Vdc
Cardswipe
CMC400 Card Reader
CSC450* Slave Card Reader
●
●
● ● 5 ● 2000 ● ● ●● 200mA200mA ● ●200mA ●● ● 6, out Up to20cm
●
●
●
RetentiveMemory
●
●
●12Vdc
Proximity
CPX100 Proximity Reader ●
DMG DG
*Note - Features & Funct ions when connected to a Master reader.For information on Cards and Tags see page AC24.
Doors Controlled
Single Multi
Status Visual Audible
AC21
A c c e s s C o n t r o l - R e a d e r s
Keypads
CIK100
CSK150
CEK200
• Ideal for External and Internal use.
• Robust design with hardwearing
stainless steel buttons.
• Weather protected to IP53 rating.
• low current option available forpowering from batteries.
• Ideal for Internal use or in areassheltered from the weather.
• Hardwearing zinc alloy casing.
• Low current option available forpowering from batteries.
• Slave keypad for use with theCMC400 to give the added secuity ofthe requirement for both a card andcode on entry.
• Hardwearing zinc alloy casing.
CEK200 CIK100 CSK150
Standards
Security Features
● ● ●
●
● ●
5 5 5
● ● ●
Door Features
Single ● ● ●
Multi
Guarantee
CorrosionResistant
TamperResistant
Features/Functions
Number of Users
Master
Slave
Keypad
Card
Input Voltage
Peak
Holding
Hold Open Output
RTE Input
Alarm Output
Lock Release Time Ouput
Visual
Audible
Fail Locked
Fail Unlocked
Retentive Memory
Incorrect Code Lockout
Door Contact Monitoring
Reader Range
Current Consumption
Hierachy
Programming Method
StatusSupply
Power FaliureCompatability
4 codes 4 codes 4000
● ●
●
● ● ●
●
12Vdc 12Vdc 12Vdc
40mA 40mA 90mA
40mA 40mA 90mA
12Vdc 12Vdc n/a
● ● ●
● ●
● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
3, out 3, out 3, out
Contact Contact Contact
Finish Options
DMG
DG
DoorsControlled
70mm
128 mm
41mm
70mm
128 mm
41mm
70mm
128 mm
41mm
AC22
A c c e s s C o n t r o l - R e a d e r s
Card Readers
CSC450
CPX100
CMC400
• Ideal for Internal use or areas shelteredfrom the weather.
• Pr-wired cable with reader for easy fit.
• Simple programming from cards, noneed for programming devices orcentrally controlled computers.
• Master card reader (built in controller).
• Ideal for Internal use or areas shelteredfrom the weather.
• Slave card reader (requires connectionto a controller, such as the CMC400).
• Ideal for Internal use or areas shelteredfrom the weather. Gives cost effectivecard swipe access from both sides of adoor when linked with the CMC400.
• Ideal for external and Internal use.
• Pre-wired cable with reader for easy fit.
• Simple programming from cards, no needfor programming devices or centrallycontrolled computers.
• Master Proximity reader (built incontroller).
• Includes ‘start up’ quantity of Master andUser Cards/tokens.
Proximity Reader
50 mm38 mm
128 mm
35 mm
125 m
128 mm
50 mm38 mm
128 mm
35 mm
125 m
128 mm
86mm60mm
86mm
15mm
CMC400 CSC450 CPX100
Standards
Security Features
● ● ●
● ●
● ●
5 5 5
● ●
●
Door Features
Single ● ● ●
Multi 10 10
Guarantee
CorrosionResistant
TamperResistant
Features/Functions
Number of Users
Master
Slave
Keypad
Card
Input Voltage
Peak
Holding
Hold Open Output
RTE Input
Alarm Output
Lock Release Time Ouput
Visual
Audible
Fail Locked
Fail Unlocked
Retentive Memory
Incorrect Code Lockout
Door Contact Monitoring
Reader Range
Current Consumption
Hierachy
Programming Method
StatusSupply
Power FaliureCompatability
4000 4000 2000
● ●
●
●
● ●
12Vdc 12Vdc 12Vdc
40mA 40mA 200mA
30mA 30mA 200mA
12Vdc 12Vdc 200mA
●
●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ●
3, out 3, out 6, out
●
Contact Contact Up to 20cm
Finish Options
DMG
DG
DoorsControlled
AC23
A c c e s s C o n t r o l - R e a d e r s
Card Reader Cards
This pack consists of two identical cards used to initialise the reader after installation. The card can be swiped through multiple readers enabling them to function as anintegral system.
Cards are availabe in packs for the CMC400 and CSC450
Initialisation Pack CICP
This pack consists of one program card and a set of user cards. Swiping the program card through a reader validates all the user cards in the pack. Cards are available inpack sizes of 20 or 50 cards. In every pack, a user card has a corresponding shadow card. As user cards are issued, the user identification is written on the shadow cardand stored in a safe place. Swiping a shadow card eliminates its corresponding user card from the reader. Useful when a user card is lost or stolen.
User Card Pack CUCP
This pack of cards extends the flexibility of the system and is needed for the following functions; Hold open, Lock open time 10 seconds, Lock open time 4 seconds, FailLocked/Fail Unlocked, Mute, Keypad code settings (for slave keypad when used with a master card reader), and Card Reader and keypad (to allow the master cardreader to operate alongside a slave keypad, only allowing entry with the correct card and access code).
Control Card Pack CCCP
The reader is supplied with 10 user cards or tokens and 2 master cards for programming.
Additional Cards or Tags are available for the CPX100 (Sold individually).
Proximity Reader Cards and Tags CPX10UCP • CPX10MC • CPX10T
Notes
AC24
Input Output Other CurrentVoltage Voltage Features Output
Case Case Case Depth Width Height
●
●
5
10
5
5
80mm 250mm 215mm
80mm 330mm 330mm
●
●
●
●
Accessor ies
240Vac LSL
12Vdc 12Vdc
240Vac 12Vdc BBF 3A
240Vac 12Vdc BBF 5A
A c c e s s C o n t r o l A c c e s s o r i e s
• Used for remote release of the motorised locks.• Red/Green light signal of lock status.
• Used to connect frame mounted units to the motorised locks.• Mortice casing for added protection with flexible stainless
steel spring for wiring.
Accessor iesRelease Button CRB Door Loop CDL
CPS3• Used to power the Solenoid locks. • 3A current output.
CPS5• Used to power the Motorised locks. • 5A current output.
• Both models have built in accommodation for backup battery tosupply temporary power in cases of mains failure.
Power Supply CPS3 • CPS5
Key: LSL = Lock Status L ights (Red/Green) BBF = Battery Backup Funct ion
Door FeaturesFeatures / FunctionsStandards Finish Options
White ChromeA c c e s s C o n t r o l
Security Features
osio
n es
ista
nt
Gua
rant
ee
CRB Release Button
CDL Door Loop
CPS3 Power Supply
CPS5 Power Supply
83mm
95mm
55mm
AC25
25mm
330mm
17mm
F u r n i t u r e & F i t t i n g s
Fu
rn
itu
re
&F
itt
ing
s
` • S t a i n l e s s S t e e l
• B r a s s
• N y l o n
• A l u m i n i u m
FF2
Note: We have made every effort to ensure that atthe time of going to print all information shown inthis catalogue is correct. However, in our efforts tocontinually improve our products and offer only thehighest levels of security and quality we reserve theright to make alterations to the productspecifications shown in this catalogue. Alldimensions provided within this catalogue areapproximate and for guidance only.
1
2
3
4
Drill ResistantHardened protection against drill attack.
5
6
8
9
10
11
12
Torque ResistantBuilt in strength against torque attack.
Saw ResistantHardened protection against saw attack.
Force ResistantBuilt in strength against force attack.
Pick ResistantBuilt in protection to resist picking.
Corrosion ResistantProducts conform to appropriate anti-corrosion requirements.
Tamper ResistantBuilt in protection against Tampering.
Fire ResistantProducts conform to appropriate fire testrequirements.
EscapeProducts for use on an escape door.
Key ControlThe products can be included in a keycontrol system.
GuaranteeProducts are guaranteed for a period oftime.
Protected SectionProducts are available as an option on apatented key section.
7
Security FeaturesIntroduction How to Specify
Standards & Approvals
Furniture & Fitt ings Index
• IntroductionStainless Steel• Features and Functions• Photo Gallery• Range TableLever Handles• Return to Door• StraightFittings
Brass• Features and Functions• Photo Gallery• Range TableLever Handles• Round Bar• Georgian Style• Victorian StyleFittings
Nylon• Features and Functions• Photo Gallery & Range TableLever Handles• Round BarFittings
Aluminium• Features and Functions• Photo Gallery • Range TableLever Handles• Round Bar• Straight• Large BackplateFittings
FF2
FF3FF4FF5
FF6FF6
FF7 - FF8
FF11FF12FF13
FF14FF14FF15
FF16 - FF19
FF20FF21
FF22FF22 - FF26
FF27FF28FF29
FF30FF30FF31
FF32 - FF35
Chubb offers a very comprehensive range ofFurniture and Fittings. Lever handles are availablein various forms to offer both contemporary andclassic styles. A large range of finishes offer theability to match other products on a door - such asdoor closers or panic hardware.The Fittings range includes pull handles, roses andescutcheons, push plates, door stops, and variousaccessories. Designed to last, the furniture and fittings rangeare available made from Stainless Steel, Brass,Nylon or Aluminium.
Chubb is accredited with and meetsthe requirements of BSEN9001
Chubb have developed a series of icons to enablethe process of product specification to besimplified.
From today you can specifically detail yourrequirements for a product, therefore ensuring thatit meets a particular standard or approval.
In addition you can now ask for specific securityfeatures to be included in the product you specify.
Chubb, Simplifying the Specification Process.
F u r n i t u r e & F i t t i n g s
Nylon
Stainless Steel
Aluminium
Brass
Products that meet PSAMOBH3PS have been tested tothe performance specifications issued by the PropertyServices Agency.
FF3
F u r n i t u r e - S t a i n l e s s S t e e l
▼
Features and Funct ions
Ideal for use with: Mortice locks & latches
Sty l ing
Finish: Satin Stainless Steel Polished Stainless Steel
Handle Fixing
Round bar levers are fixed to thespindle with a grubscrew.
GuaranteeGuarantee period applicable whenoriginal Chubb maintenanceinstructions are followed.
The furniture can be fixed to thedoor in two ways.
Bolt ThroughThe inside and outside furnitureare bolted together with a pair ofspecial bolts that pass through thelock and door.Face FixThe furniture is screw fixed to thesurface of the door.
Fixing Types
The furniture is available to suitmortice locks and latches, eitherusing roses and escutcheons orbackplates - lever key, euro profile,oval profile, bathroom and latchtypes are included.
Latch (LA)For use with tubular latches.
Lever Lock (LO)For use with mortice locksoperated by a lever key.Euro (PE)For use with cylinder mortice locksoperating with a Euro ProfilecylinderOval (PO)For use with cylinder mortice locksoperating with an Oval Profilecylinder.Bathroom (PB)For use with mortice locks thatincorporate a spindle thrown deadbolt.
Lever Furniture Variations
SprungThe lever returns to the restposition irrespective of any springaction in the lock.UnsprungThe lever returns to rest on thespring action of the lock only.
Springing
FF3
The furniture is available in two styles:
Rose StyleThe handle andcylinder escutcheonare availableseparately on a rose.
Backplate StyleThe handle andcylinder cut out areon a single backplate.
F ix ingsAll fixings, such as screws and bolts are supplied.
• This is the measurementfrom the centre of the‘follower’, which operatesthe handles, to the centreof the keyhole.
• In the UK this is commonly57mm, although othersizes are available.
Spindle
All furniture is supplied with an8mm spindle.
Concealed Fixing
Some products feature clip on coverplates which cover the fixings.
What are Centres?
Centres
Products that meet MOBH3PS havebeen tested to the performancespecifications issued by the PropertyServices Agency.
F u r n i t u r e - S t a i n l e s s S t e e l
FF4
Lever Handles - Return to Door
Page
FF6Page
FF6Page
FF6
Lever Handles - Straight
Page
FF6CS400RRS Page
FF6Page
FF6CS403RRS
CS400 Range CS402 Range CS403 Range
CS402RRS
Styling Variation Fixing Concealed SpringingBackplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung
● ● ● ●
● ● ● ● ●
● ● 57mm ● ● ●
● ● 48mm ● ● ●
● ● 48mm ● ● ●
● ● 57mm ● ● ●
Features / Functions Finish Options
● ●
● ●
● ●
● ●
● ●
● ●
5
5
5
5
5
5
SSS PSSF u r n i t u r e & F i t t i n g s
Lever Handles - Return to Door
Security Features
CS400RRS 20mm Round Bar handle
CS400LA 20mm Round Bar handle
CS400LO 20mm Round Bar handle
CS400PE 20mm Round Bar handle
CS400PO 20mm Round Bar handle
CS400PB 20mm Round Bar handle
● ● ● ●
● ● ● ● ●
● ● 57mm ● ● ●
● ● 48mm ● ● ●
● ● 48mm ● ● ●
● ● 57mm ● ● ●
● ● ● ●
● ● ● ● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
5
5
5
5
5
5
5
5
5
5
5
5
Lever Handles - Straight
CS402RRS 20mm Round Bar handle
CS402LA 20mm Round Bar handle
CS402LO 20mm Round Bar handle
CS402PE 20mm Round Bar handle
CS402PO 20mm Round Bar handle
CS402PB 20mm Round Bar handle
CS403RRS 20mm Shaped Round Bar Handle
CS403LA 20mm Shaped Round Bar Handle
CS403LO 20mm Shaped Round Bar Handle
CS403PE 20mm Shaped Round Bar Handle
CS403PO 20mm Shaped Round Bar Handle
CS403PB 20mm Shaped Round Bar Handle
FF5
CS403LA
FF6
Lever Handles - Return to Door20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle
F u r n i t u r e - S t a i n l e s s S t e e l
Model Centres
CS400LA n/a
CS400LO 57mm
CS400PE 48mm
CS400PO 48mm
CS400PB 57mm
CS400LO
CS400LA
CS400PE CS400PO CS400PB
Lever Handles - Straight20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle
Model Centres
CS402LA n/a
CS402LO 57mm
CS402PE 48mm
CS402PO 48mm
CS402PB 57mmCS402LA
20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle
Model Centres
CS403LA n/a
CS403LO 57mm
CS403PE 48mm
CS403PO 48mm
CS403PB 57mm
CS403RRS
52mm
140mm
67mm
44mm
20mm
67mm
8mm
20mm
8mm
165mm
44mm 67mm
165mm
140mm
130mm
44mm 59mm
20mm
8mm
165mm
125mm
20mm
8mm
52mm
130mm
67mm
20mm
8mm
52mm
124mm
67mm
20mm
8mm
• Ideal for heavy duty applications.
• Ideal for heavy duty applications.
• Ideal for heavy duty applications.
• Ideal for heavy duty applications.
• Ideal for heavy duty applications.
• Ideal for heavy duty applications.
CS402LO CS402PE CS402PO CS402PB
CS403LO CS403PE CS403PO CS403PB
CS400RRS
CS402RRS
FF7
F i t t i n g s - S t a i n l e s s S t e e l
• Ideal for use with the round rose handle. • Ideal for heavy duty applications.
CS448OCS448E
CS448R
CS416PE CS416PO
CS416LO
CS448B
CS416TU
Fitt ings
• Bolt Fix. • Back to Back Fix.
Model A
CS417/1BF 150mm
CS417/2BF 225mm
CS417/3BF 300mm
Model A
CS419/1BB 150mm
CS419/2BB 225mm
CS419/3BB 300mm
Cylinder Pulls
Pull Handles Pull Handles
52mm
7mm
52mm
7mm
7mm
52mm
7mm
52mm
AA
Escutcheons & Turn Indicator
78mm
43mm
43mm
78mm
43mm
78mm
43mm
78mm
60mm
60mm
19mm19mm
CS450
FF8
F i t t i n g s - S t a i n l e s s S t e e l
Fitt ings
• Pull handle mounted on Backplate, Screw Fix. • Concealed Fix.
Pull Handles Pull Handles
Model A
CS418/1CF 150mm
CS418/2CF 225mm
CS418/3CF 300mm
Model A B C
CS420/1P 165mm 150mm 155mm
CS420/2P 300mm 225mm 75mm
CS420/3P 350mm 300mm 75mm
CS320/1P
CS452
CS453
Letter Plate & Door Tidy Towel Rail
AB
C
A
600mm
52mm
52mm
19mm
332mm
100mm
300mm
75mm
FF9
F i t t i n g s - S t a i n l e s s S t e e l
Finger Plates & Kicking Plates
CS469
CS464
Bell Push
CS449
Toilet Roll Holder
CS465
Hand Rail Bracket
Fitt ings
CS462
Flush Bolt
• Dimensions of 100mm x 150mm.• Lever Action.
Signs
CS446MS CS446FS CS446DS
19mm
CS467
CS468
75mm
300mm
sized to order
sized to
order
250mm
150mm
100mm 100mm 100mm
150mm 150mm
135mm
70mm
52mm 76mm52mm
CS445 Range
CS446 CS447
Hooks
F i t t i n g s - S t a i n l e s s S t e e l
Fitt ings
FF10
Wardrobe Hook Hat & Coat Hook
CS442
CS445FC CS445FBCS445OFS
Wall Mounted Door Stops
Concealed FixSecret Fix
Concealed Fix Bumper Secret FixOval Shielded
Model A
CS444/5 50mm
CS444/7 75mm
Notes
A75mm
Floor Mounted Door Stops
50mm 50mm 30mm
62mm
28mm19mm
85mm
28mm19mm
F u r n i t u r e - B r a s s
▼
Features and Funct ions
Ideal for use with: Mortice locks & latches.
S ty l ing
Finish: Polished Brass
Handle Fixing
Round bar levers are fixed to thespindle with a grubscrew.
GuaranteeGuarantee period applicable whenoriginal Chubb maintenanceinstructions are followed.
The furniture can be fixed to thedoor in two ways.
Bolt ThroughThe inside and outside furnitureare bolted together with a pair ofspecial bolts that pass through thelock and door.Face FixThe furniture is screw fixed to thesurface of the door.
Fixing Types
The furniture is available to suitmortice locks and latches, eitherusing roses and escutcheons orbackplates - lever key, euro profile,oval profile, bathroom, privacy andlatch types are included.
Latch (LA)For use with tubular latches.
Lever Lock (LO)For use with mortice locksoperated by a lever key.Euro (PE)For use with cylinder mortice locksoperating with a Euro ProfilecylinderOval (PO)For use with cylinder mortice locksoperating with an Oval Profilecylinder.Bathroom (PB)For use with mortice locks thatincorporate a spindle thrown deadbolt.Privacy (PR) For use with tubular larches wherethe handle requires locking.
Lever Furniture Variations
SprungThe lever returns to the restposition irrespective of any springaction in the lock.UnsprungThe lever returns to rest on thespring action of the lock only.
Springing
FF11
The furniture is available in two styles:
Rose StyleThe handle andcylinder escutcheonare availableseparately on a rose.
Backplate StyleThe handle andcylinder cut out areon a single backplate.
• In addition to the contemporary round bar range,Chubb also have a range of classic Georgian andVictorian styles available.
F ix ingsAll fixings, such as screws and bolts are supplied.
• This is the measurementfrom the centre of the‘follower’, which operatesthe handles, to the centreof the keyhole.
• In the UK this is commonly57mm, although othersizes are available.
Spindle
All furniture is supplied with an8mm spindle.
Concealed Fixing
Some products feature clip on coverplates which cover the fixings.
What are Centres?
Centres
F u r n i t u r e - B r a s s
FF12
Lever Handles - Return to Door Lever Handles - Victor ian Sty leLever Handles - Georgian Sty le
Page
FF15
Page
FF14Page
FF15Page
FF15Page
FF14
CBR205 Range CBR206 Range • CBR208 RangeCBR207 Range Page
FF14CBR200 RangePage
FF14Page
FF15
CBR200RR CBR207PR CBR205PR CBR206PR
Styling Variation Fixing Concealed SpringingBackplate Rose Latch Lock Euro Oval Bathroom Privacy Centres Face Fix Bolt Through Fixing Sprung Un Sprung Other
● ● ● ●
● ● ● ● ●
● ● 57mm ● ● ●
● ● 48mm ● ● ●
● ● 48mm ● ● ●
● ● 57mm ● ● ●
Features / FunctionsFinish
Options
●
●
●
●
●
●
5
5
5
5
5
5
PolishedBrass
F u r n i t u r e & F i t t i n g s
Lever Handles - Return to Door
Security Features
CBR200RR 20mm Round Bar handle
CBR200LA 20mm Round Bar handle
CBR200LO 20mm Round Bar handle
CBR200PE 20mm Round Bar handle
CBR200PO 20mm Round Bar handle
CBR200PB 20mm Round Bar handle
● ● ● ● SB
● ● 57mm ● ●
● ● 57mm ● ●
● ● ● ● SB
● ● ● ● SB
● ● 57mm ● ●
● ● 57mm ● ●
● ● ● ● SB
● ● ● ● SB
● ● 57mm ● ●
● ● 57mm ● ●
●
●
●
●
●
●
●
●
●
●
●
5
5
5
5
5
5
5
5
5
5
5
Lever Handles - Victorian Style
CBR205LA Victorian Straight
CBR205LO Victorian Straight
CBR205PB Victorian Straight
CBR205PR Victorian Straight
CBR206LA Victorian Scroll
CBR206LO Victorian Scroll
CBR206PB Victorian Scroll
CBR206PR Victorian Scroll
CBR208LA Victorian Shaped Scroll
CBR208LO Victorian Shaped Scroll
CBR208PB Victorian Shaped Scroll
● ● ● ● SB
● ● 57mm ● ●
● ● 57mm ● ●
● ● ● ● SB
●
●
●
●
5
5
5
5
Lever Handles - Georgian Style
CBR207LA Georgian Handle
CBR207LO Georgian Handle
CBR207PB Georgian Handle
CBR207PR Georgian Handle
FF13
Key: SB = Short Backplate
FF14
• Ideal for heavy duty applications.• See fittings for matching eschutcheons.
• Bathroom version has inside turn and outside emergency release. • Ideal for heavy duty applications.
Lever Handles - Return to Door
F u r n i t u r e - B r a s s
Model Centres
CBR200LA n/a
CBR200LO 57mm
CBR200PE 48mm
CBR200PO 48mm
CBR200PB 57mm
Lever Handles - Georgian Sty leGeorgian Handle on Backplate
Model Centres
CBR207LA n/a
CBR207LO 57mm
CBR207PB 57mm
• Ideal for medium/heavy duty applications.• For use with tubular latches.• Inside turn locks handle, emergency release on outside handle.
20mm Round Bar Handle on Backplate
129mm 63mm
180mm
40mm 11mm
51mm
63mm
129mm
7mm
•••••••••••••• ••••••••••••••••• • • •
20mm Round Bar Round Rose Handle
Georgian Privacy Handle
CBR200LA
CBR200RR
CBR207PR
Outside Handle
CBR200LO CBR200PE
CBR200PO CBR200PB
96mm
110mm
50mm
55mm
9mm
•••••••••••••• ••••••••••••••••• • • •
• Bathroom version has inside turn and outside emergency release. • Ideal for heavy duty applications.
96mm
120mm
50mm
55mm
9mm
CBR207LA
CBR207LOCBR207PB
Long Backplate
CBR207LAShort Backplate
CBR207LO CBR207PB
•••••••••••••• ••••••••••••••••• • • •
96mm
110mm
50mm
55mm
9mm
Victorian Shaped Scroll
• Ideal for medium/heavy duty applications.• For use with tubular latches.• Inside turn locks handle, emergency release
on outside handle.
Lever Handles - Victor ian Sty leStraight Handle on Backplate
Scroll Handle on Backplate
F u r n i t u r e - B r a s s
Model Centres
CBR205LA n/a
CBR205LO 57mm
CBR205PB 57mm
Model Ctr.
CBR206LA CBR208LA n/a
CBR206LO CBR208LO 57mm
CBR206PB CBR208PB 57mm
CBR208 Range
• Victorian Scrollhandle on ashaped backplate (203mm x 50mm).
• Available in Latch,Lock andBathroomvariations.
• Ideal for medium/heavy duty applications.• For use with tubular latches.• Inside turn locks handle, emergency release
on outside handle.
Straight Privacy Handle
Scroll Privacy Handle
CBR205PR
CBR206PR
Outside Handle
Outside Handle
FF15
105mm
120mm
42mm
33mm
10mm
120mm
98mm
46mm
42mm
10mm
• Ideal for medium/heavy duty applications.• Bathroom version has inside turn and outside emergency release.
• Ideal for medium/heavy duty applications.• Bathroom version has inside turn and outside emergency release.
CBR205LA
CBR206LA CBR208LA
CBR205LO CBR205PB
CBR206LOCBR208LO
CBR206PBCBR208PB
120mm
42mm
98mm
120mm
42mm
46mm
10mm
105mm
105mm
120mm
42mm
33mm
10mm
33mm
10mm
CBR205LOCBR205PB
Long Backplate
CBR206LO • CBR206PBLong Backplate
150mm long
CBR206LAShort Backplate
CBR205LAShort Backplate
FF16
F i t t i n g s - B r a s s
• Ideal for use with the round rose handle.
CBR248PECBR215PE CBR215PO
CBR215LO CBR248B
CBR216TU
Fitt ings
• Bolt fix handle. • Cranked pull handle, screw fix.
Escutcheons and Turn Indicator Cylinder Pulls
Pull Handles Pull Handles
CBR248PO
Model A
CBR238/2 225mm
CBR238/3 300mm
CBR248R
52mm
7mm
52mm78mm 78mm
43mm
78mm
43mm
43mm
78mm
43mm
52mm
52mm
7mm
7mm7mm
52mm
60mm60mm 50mm
AA 19mm
Model A
CBR217/1BF 150mm
CBR217/2BF 225mm
CBR217/3BF 300mm
FF17
F i t t i n g s - B r a s s
Fitt ings
• Ideal for heavy duty applications.• Back to Back fix.
• Pull handle mounted on backplate, screw fix. • Concealed fix.
Pull Handles Finger Plates & Kicking Plate
Model A
CBR218/1CF 150mm
CBR218/2CF 225mm
CBR218/3CF 300mm
Model A
CBR219/1BB 150mm
CBR219/2BB 225mm
CBR219/3BB 300mm
AB
C
Model A B C
CBR220/1P 165mm 150mm 155mm
CBR220/2P 300mm 225mm 75mm
CBR220/3P 350mm 300mm 75mm
CBR220/IP
Pull Handles Pull Handles
A
A
CBR269
75mm
300mm
CBR267
CBR268
sized to order
sized to
order
52mm
60mm
19mm
19mm
Model A
CBR259/1 76mm
CBR259/2 102mm
CBR259/3 152mm
CBR259/4 204mm
CBR259/5 254mm
CBR259/6 305mm
FF18
F i t t i n g s - B r a s s
Indicator Bolt
CBR252 CBR255
Letter Plate & Door Tidy
Hand Rail Bracket
Wardrobe Hook Hat & Coat Hook
Hooks
Signs
CBR266MS CBR266FS CBR266DS
CBR249
CBR250
Toilet Roll Holder
Towel Rail
Fitt ings
CBR264
Bell Push
CBR265
CBR246
CBR247
A
Cabin Hooks
150mm
100mm 100mm 100mm
150mm 150mm
CBR263 57mm
41mm
63mm
135mm 52mm
70mm
55mm 80mm
300mm
75mm
600mm
52mm
50mm
62mm
28mm
227mm
50mm
Concealed Fix
Model A
CBR244/5 50mm
CBR244/7 75mm
CBR257W
CBR257H
CBR260
CBR240
Knob Furniture & Cabinet Handle
Oval Sheilded Round Shielded Bumper Secret Fix
Wall Mounted Door Stops Floor Mounted Door Stops
Bolts Casement Stay
Casement Fasteners
F i t t i n g s - B r a s s
Fitt ings
CBR245OFS CBR245FS CBR245FB
A
A
A
Model A
CBR258/2 100mm
CBR258/3 150mm
Model A
CBR262/1 150mm
CBR262/2 200mm
Barrell Bolts
Wedge Type• Supplied with 8mm spindle. Hook Type
Lever Action Flush Bolts
Model A
CBR240/10 100mm
CBR240/15 152mm
Model A
CBR256/2 254mm
CBR256/3 300mm
A75mm
Secret Fix
CBR242
FF19
50mm 41mm 30mm
90mm
37mm
A 9.5mm
105mm
110mm
FF3
F u r n i t u r e - N y l o n
Features and Funct ionsStyl ing
Finish:
Handle Fixing
Round bar levers are fixed to thespindle with a grub screw.
Fire ResistantCertain products have been includedin a successful fire test to BS 476 PT22
GuaranteeGuarantee period applicable whenoriginal Chubb maintenanceinstructions are followed.
Products that meet PSAMOBH3PShave been tested to the performancespecifications issued by the PropertyServices Agency.
The furniture can be fixed to thedoor in two ways.
Bolt ThroughThe inside and outside furnitureare bolted together with a pair ofspecial bolts that pass through thelock and door.Face FixThe furniture is screw fixed to thesurface of the door.
Fixing Types
The furniture is available to suitmortice locks and latches, eitherusing roses and escutcheons orbackplates - lever key, euro profile,oval profile, bathroom and latchtypes are included.
Latch (LA)For use with tubular latches.
Lever Lock (LO)For use with mortice locksoperated by a lever key.Euro (PE)For use with cylinder mortice locksoperating with a Euro ProfilecylinderOval (PO)For use with cylinder mortice locksoperating with an Oval Profilecylinder.Bathroom (PB)For use with mortice locks thatincorporate a spindle thrown deadbolt.
Lever Furniture Variations
SprungThe lever returns to the restposition irrespective of any springaction in the lock.UnsprungThe lever returns to rest on thespring action of the lock only.
Springing
FF20
The furniture is available in two styles:
Rose StyleThe handle andcylinder escutcheonare availableseparately on a rose.
Backplate StyleThe handle andcylinder cut out areon a single backplate.
F ix ingsAll fixings, such as screws and bolts are supplied.
• This is the measurementfrom the centre of the‘follower’, which operatesthe handles, to the centreof the keyhole.
• In the UK this is commonly57mm, although othersizes are available.
Spindle
All furniture is supplied with an8mm spindle.
Concealed Fixing
Some products feature clip on coverplates which cover the fixings.
What are Centres?
Centres
Steel Cored
Steel core of the handle helpsto increase the strength.
Black RAL 9005 White RAL 9016 Blue RAL 5002 Dark Blue RAL 5003 Red RAL 3003 Dark Red RAL 3005
Light Grey RAL 7036 Dark Grey RAL 7043 Green RAL 6016 Yellow RAL 1004 Brown RAL 8017
Page
FF22CN100 Range
F u r n i t u r e - N y l o n
FF21
Lever Handles - Return to Door
Page
FF22CN100RR
Styling Variation Fixing Concealed SpringingBackplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung
● ● ● ●
● ● ● ● ●
● ● 57mm ● ● ●
● ● 48mm ● ● ●
● ● 48mm ● ● ●
● ● 57mm ● ● ●
Features / Functions Finish Options
● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ●
● 5
5
5
5
5
5
F u r n i t u r e & F i t t i n g s
Lever Handles - Return to Door
Security Features
CN100RR Steel Core Round Bar
CN100LA Steel Core Round Bar
CN100LO Steel Core Round Bar
CN100PE Steel Core Round Bar
CN100PO Steel Core Round Bar
CN100PB Steel Core Round Bar
9005 9016 5002 5003 3003 3005 7036 7043 6016 1004 8017
FF22
CN100RR
Lever Handles - Return to Door21mm Round Bar Handle on Backplate
F u r n i t u r e & F i t t i n g s - N y l o n
Model Centres
CN100LA n/a
CN100LO 57mm
CN100PE 48mm
CN100PO 48mm
CN100PB 57mmCN100LA
52mm
135mm
64mm
46mm
21mm
73mm
225mm
135mm
21mm
CN115PE CN115PO
CN115LO
CN116TU
Fitt ingsEscutcheons and Turn & Indicator Cylinder Pulls
CN100LO CN100PE CN100PO CN100PB
21mm Round Bar Round Rose Handle
CN148RCN148B
CN148POCN148PE
43mm
78mm
43mm
78mm
9mm
52mm
9mm
52mm
9mm
52mm
9mm
52mm
43mm
78mm
43mm
78mm
FF23
F i t t i n g s - N y l o n
Fitt ings
• Bolt Fix. • Back to Back Fix.
Pull Handles Pull Handles
• Concealed Fix. • CN134 Range are Bolt Fix. • CN135 Range are Concealed Fix.
Pull Handles Pull Handles
Model A B C
CN131/1BF 165mm 64mm 23mm
CN131/2BF 220mm 85mm 34mm
CN131/3BF 300mm 85mm 34mm
Model A B C
CN132/1CF 165mm 52mm 23mm
CN132/2CF 220mm 70mm 34mm
CN132/3CF 300mm 70mm 34mm
Model A
CN134/2CBF 200mm
CN134/3CBF 300mm
CN135/2CBF 200mm
CN135/3CBF 300mm
AC A34mm
34mm
85mm
B
A C
A 34mm
120mm
Model A
CN133/2BB 220mm
CN133/3BB 300mm
70mm
B
FF24
F i t t i n g s - N y l o n
Fitt ings
• CN137/3SBF is Bolt Fix. • CN137/3SCF is Concealed Fix. • CN136/3TBF is Bolt Fix. • CN136/3TCF is Concealed Fix.
Pull Handles Pull Handles
Model A
CN137/3SBF 88mm
CN137/3SCF 98mm
Model A
CN136/3TBF 85mm
CN136/3TCF 97mm
Finger Plates & Kicking Plates
CN167 CN168CN169 CN152DT
CN152LP
Letter Plate & Door Tidy
75mm
300mm
75mm
300mm sized to order
sized to
order
380mm
90mm
90mm
380mm
235mm
AA
300mm300mm
70mm
246mm
34mm
70mm
CN150TR
FF25
F i t t i n g s - N y l o n
CN164BP
Bell Push
CN150R
Towel Ring & Towel Rail
Cabinet Handles
CN149TH
Toilet Roll Holder
Fitt ings
Barrel Bolts Flush Bolt
450mm160mm
50mm
126mm
50mm
20mm
52mm17mm CN161CK
Cupboard Knob
40mm
40mm
220mm
160mm
50mm
A
C B
Model A B C
CN141/6CH 32mm 64mm 10mm
CN141/9CH 38mm 96mm 12mm
CN162FB
Model A
CN158/1 152mm
CN158/2 200mmA
25mm
203mm
19mm
CN165DS
CNSGFA FIRE EXIT èCNSGFB FIRE EXIT çCNSGFC FIRE EXIT êCNSGFD FIRE EXIT éCNSGFE FIRE EXIT ì
CNSGEF EXIT èCNSGEG EXIT çCNSGEH EXIT êCNSGEJ EXIT éCNSGEK EXIT ì
CNSBA Fire door keep closedCNSBB Fire door keep lockedCNSBC Automatic fire doorCNSBD Close this door at nightCNSBE This door is alarmedCNSBF Alarm will sound if bar is pushedCNSBG This door must be kept closedCNSBH Gangway keep clearCNSBJ Fire escape keep clearCNSBK Fire exit keep clear
CN165FS CN165MS
100mm
CN166DS
150mm
CN166FS CN166MS
100mm
150mm
100mm
150mm
CN146W
CN142
CN145FC
CN147CF
Signs & Symbols
F i t t i n g s - N y l o n
Fitt ings
FF26
164mm62mm
35mm
Door Stops Hooks
75mm
40mm
Secret Fix Wall Mounted Concealed Fix Floor MountedWardrobe Hook
Hat & Coat Hook - Concealed Fix Hat & Coat Hook -Face Fix
145mm
63mm
CN147FF
• Rigid Plastic - Screw fixing.• All exit signs feature running person icon. • Available as Rigid Plastic - Screw fixing, or Vinyl Self Adhesive. • Rigid Plastic - Screw fixing.
Sign shown is:CNSFE FIRE EXIT ì
Sign shown is:CNSBJ Fire exit keep clear
CN165DS
52mm
80mm
35mm 35mm
▼Ideal for use with: Mortice locks & latches
FF3
Features and Funct ionsStyl ing
Finish:
Handle Fixing
Round bar levers are fixed to thespindle with a grub screw.
GuaranteeGuarantee period applicable whenoriginal Chubb maintenanceinstructions are followed.
The furniture can be fixed to thedoor in two ways.
Bolt ThroughThe inside and outside furnitureare bolted together with a pair ofspecial bolts that pass through thelock and door.Face FixThe furniture is screw fixed to thesurface of the door.
Fixing Types
SprungThe lever returns to the restposition irrespective of any springaction in the lock.UnsprungThe lever returns to rest on thespring action of the lock only.
Springing
FF27
The furniture is available in two styles:
Rose StyleThe handle andcylinder escutcheonare availableseparately on a rose.
Backplate StyleThe handle andcylinder cut out areon a single backplate.
F ix ingsAll fixings, such as screws and bolts are supplied.
• This is the measurementfrom the centre of the‘follower’, which operatesthe handles, to the centreof the keyhole.
• In the UK this is commonly57mm, although othersizes are available.
Spindle
All furniture is supplied with an8mm spindle.
Concealed Fixing
Some products feature clip on coverplates which cover the fixings.
What are Centres?
Centres
F u r n i t u r e - A l u m i n i u m
Satin Anodised Textured Silver
Satin Anodised
Textured SilverThe furniture is available to suitmortice locks and latches, eitherusing roses and escutcheons orbackplates - lever key, euro profile,oval profile, bathroom and latchtypes are included.
Latch (LA)For use with tubular latches.
Lever Lock (LO)For use with mortice locksoperated by a lever key.Euro (PE)For use with cylinder mortice locksoperating with a Euro ProfilecylinderOval (PO)For use with cylinder mortice locksoperating with an Oval Profilecylinder.Bathroom (PB)For use with mortice locks thatincorporate a spindle thrown deadbolt.
Lever Furniture Variations
F u r n i t u r e - A l u m i n i u m
FF28
Lever Handles - Return to Door Lever Handles - Straight
Page
FF30CA300RR • CA304RR
Page
FF30CA300 Range • CA304 Range
Page
FF30CA302RR
Page
FF30CA302 Range
Page
FF303CF
Page
FF303R35
Page
FF303K70
Style Variation Fixing Concealed SpringingBackplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung Other
● ● ● ● ●
● ● ● ● ● ●
● ● 57mm ● ● ● ●
● ● 48mm ● ● ● ●
● ● 48mm ● ● ● ●
● ● 57mm ● ● ● ●
● ● ● ● ● ● RCB
● ● 57mm ● ● ● ● RCB
● ● 57mm ● ● ● ● RCB
● ● ● ● ●
● ● ● ● ● ●
● ● 57mm ● ● ● ●
● ● 48mm ● ● ● ●
● ● 48mm ● ● ● ●
● ● 57mm ● ● ● ●
Features / Functions Finish Options
F u r n i t u r e & F i t t i n g s
Security Features
Key: RCB = Radius Cornered Backplate LH = Left Hand RH = Right Hand
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Lever Handles - Return to Door
CA300RR 20mm Round Bar Handle
CA300LA 20mm Round Bar Handle
CA300LO 20mm Round Bar Handle
CA300PE 20mm Round Bar Handle
CA300PO 20mm Round Bar Handle
CA300PB 20mm Round Bar Handle
CA301RLA 20mm Round Bar Handle
CA301RLO 20mm Round Bar Handle
CA301RPB 20mm Round Bar Handle
CA304RR 22mm Round Bar Handle
CA304LA 22mm Round Bar Handle
CA304LO 22mm Round Bar Handle
CA304PE 22mm Round Bar Handle
CA304PO 22mm Round Bar Handle
CA304PB 22mm Round Bar Handle
FF29
● ●
● ●
● ●
● ●
● ●
● ●
●
●
●
●
●
●
●
●
●
● ● 57mm ● ● ● ●
● ● 57mm ● ● ● ● LH
● ● 57mm ● ● ● ● RH
● ● 53mm ● ● ● ●
● ● ● ● ●
● ● ● ● ● ●
● ● 57mm ● ● ● ●
● ● 48mm ● ● ● ●
● ● 48mm ● ● ● ●
● ● 57mm ● ● ● ●
5
5
5
5
5
5
5
5
5
5
Lever Handles - Straight
3K70 Straight Handle
3R35L Straight Handle
3R35R Straight Handle
3CF Straight Handle
CA302RR 20mm Round Bar Handle
CA302LA 20mm Round Bar Handle
CA302LO 20mm Round Bar Handle
CA302PE 20mm Round Bar Handle
CA302PO 20mm Round Bar Handle
CA302PB 20mm Round Bar Handle
●
●
●
●
●
●
●
●
●
●
SatinAnodised
TexturedSilver
FF30
Lever Handles - Return to Door
F u r n i t u r e - A l u m i n i u m
Lever Handles - Straight
CA302RR
20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle
CA302LOCA302LA CA302PE CA302PO CA302PB
40mm 65mm
154mm
120mm
3K70 3CF3R35
Round Bar Handle on Backplate Round Bar Round Rose Handle
Model CentresLA n/aLO 57mmPE 48mmPO 48mmPB 57mm
CA300LACA304LA
CA300PECA304PE
CA300POCA304PO
CA300PBCA304PB
Model A
CA300RR 20mm
CA304RR 22mm
Model ACA300 Range 20mmCA301R & CA304 Ranges 22mm 52mm
126mm
63mm
40mm
A
65mm
154mm
132mm
A
52mm
120mm
62mm
20mm20mm
200mm 102mm
40mm
10mm
200mm 102mm
40mm
10mm
200mm 102mm
40mm
10mm
• 57mm Centres. • 57mm Centres.• For use with the
3R35 mortice lock.
• 53mm Centres.
• CA300 Range available in Textured Silver finish.
• Rounded Backplate(RCB).
CA301R Range
Model CentresCA302LA n/aCA302LO 57mmCA302PE 48mmCA302PO 48mmCA302PB 57mm
CA300LOCA304LO
F u r n i t u r e - A l u m i n i u m
Lever Handles - Return to Door on Large Backplates
CA311LOCA312LOCA313LOCA314LO
CA311LA • CA312LACA313LA • CA314LA
CA311PECA312PECA313PECA314PE
CA311POCA312POCA313POCA314PO
CA311PBCA312PBCA313PBCA314PB
160mm
see table below
A
Style Variation Fixing Concealed SpringingBackplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung Other
Features / Functions Finish Options
F u r n i t u r e & F i t t i n g s
Security Features
160 x 64 ● ● ●
160 x 64 ● 57mm ● ●
160 x 64 ● 48mm ● ●
160 x 64 ● 48mm ● ●
160 x 64 ● 57mm ● ● LH/RH
160 x 160 ● ● ●
160 x 160 ● 57mm ● ●
160 x 160 ● 48mm ● ●
160 x 160 ● 48mm ● ●
160 x 160 ● 57mm ● ● LH/RH
5
5
5
5
5
5
5
5
5
5
Lever Handles - On Large Backplates
●
●
●
●
●
●
●
●
●
●
SatinAnodised
Lever Handles - Return to Door
Key: * Round Bar Handle LH = Left Hand RH = Right Hand
CA311LA*(20mm) ● CA312LA* (22mm)
CA311LO*(20mm) ● CA312LO* (22mm)
CA311PE* (20mm) ● CA312PE* (22mm)
CA311PO*(20mm) ● CA312PO* (22mm)
CA311PB* (20mm) ● CA312PB* (22mm)
CA313LA*(20mm) ● CA314LA* (22mm)
CA313LO*(20mm) ● CA314LO* (22mm)
CA313PE* (20mm) ● CA314PE* (22mm)
CA313PO*(20mm) ● CA314PO* (22mm)
CA313PB* (20mm) ● CA314PB* (22mm)
(mm)
• Available in two Backplate sizes.
Model ACA311 Range 20mm
CA312 Range 22mm
CA313 Range 20mm
CA314 Range 22mm
Model Centres
LA n/a
LO 57mm
PE 48mm
PO 48mm
PB 57mm
FF31
• 160 x 64 Backplate.
• Available in Lock, Euro, Oval & Bathroom styles.
CA311 Range • CA312 Range
F32
F i t t i n g s - A l u m i n i u m
• Also available in Textured Silver finish.
CA348POCA348PE
CA348R
CA315PE CA315PO
CA315LO CA348B
CA316TU
Fitt ings
• Bolt Fix. • CA317 is also available in Textured Silver finish. • Concealed Fix.
Model A
CA324/1CF 150mm
CA324/2CF 225mm
CA324/3CF 300mm
Model A
CA318/1CF 150mm
CA318/2CF 225mm
CA318/3CF 300mm
Model A
CA323/1BF 150mm
CA323/2BF 225mm
CA323/3BF 300mm
Model A
CA317/1BF 150mm
CA317/2BF 225mm
CA317/3BF 300mm
Escutcheons & Indicator Turn Cylinder Pulls
Pull Handles Pull Handles
7mm
52mm
7mm
52mm
7mm
52mm
7mm
78mm
43mm
78mm
43mm
78mm
43mm
78mm
43mm
52mm
Model B
CA317 Range 19mm
CA323 Range 22mm
Model B
CA318 Range 19mm
CA324 Range 22mm
B AB A
FF33
F i t t i n g s - A l u m i n i u m
Fitt ingsPull Handles Pull Handles
Pull Handles Pull Handles
Model A
CA325/1BB 150mm
CA325/2BB 225mm
CA325/3BB 300mm
Model A
CA319/1BB 150mm
CA319/2BB 225mm
CA319/3BB 300mm
Model B
CA319 Range 19mm
CA325 Range 22mm
Model B
CA320 Range 19mm
CA326 Range 22mm
Model A
CA338 /2 225mm
CA338/3 300mm
Model A
CA322/2CBB 225mm
CA322/3CBB 300mm
CA320/1P
B A
60mm
A
60mm 50mm
DA
C
B
• Cranked Pull Handle, Screw Fix.
A B
• CA322 & CA328 are Back to Back Fix versions of CA321 & CA327.
• Back to Back Fix.
• Pull Handle mounted on Backplate, Screw Fix.
Model A
CA321/2CBF 225mm
CA321/3CBF 300mm
Model B
CA321 & CA322 Range 19mm
CA327 & CA328 Range 22mm
Model A B C
CA326/1P • CA320/1P 165mm 150mm 155mm
CA326/2P • CA320/2P 300mm 225mm 75mm
CA326/3P • CA320/3P 350mm 300mm 75mm107mm
FF34
F i t t i n g s - A l u m i n i u m
Finger Plates & Kicking Plates
CA369
CA355CA355
CA364
Letter Plate & Door Tidy
Bell Push
CA349
CA350
Toilet Roll Holder
CA365
Towel Rail
Hand Rail Bracket
Fitt ings
52mm
79mm
300mm
52mm10mm
76mm
300mm
75mm
CA467
CA468 sized to order
sized to
order
135mm
600mm
52mm
70mm
227mm
50mm
CA345OFS
CA342
CS445 Range
CA346
CA347
Wall Mounted Door Stops
Wardrobe Hook
Hooks
F i t t i n g s - A l u m i n i u m
Fitt ingsFlush Bolts & Barrel Bolts Signs
Floor Mounted Door Stops
CA366MS CA366FS CA366DS
FF35
Hat & Coat Hook • CA347 Available in buffered finish (CA347B)
Oval Shielded
Wall Mounted Secret Fix
65mm
60mm
92mm
75mm
Model ACA358/1 75mm
CA358/2 100mm
CA358/3 150mm
Model ACA362/1 150mm
CA362/2 200mm
Model ACA344/5 50mm
CA344/7 75mm
AA
A
50mmCA345FS
Round Shielded
50mm
75mm
100mm
150mm
100mm
150mm
100mm
150mm
Concealed Fix
D o o r C l o s e r s
Do
or
Clo
se
rs
• O v e r h e a d
D o o r C l o s e r s
• E l e c t r o - M a g
D o o r C l o s e r s
• F l o o r s p r i n g s
• A u t o m a t i c
D o o r S y s t e m s
P
Note: We have made every effort to ensure that atthe time of going to print all information shown inthis catalogue is correct. However, in our efforts tocontinually improve our products and offer only thehighest levels of security and quality we reserve theright to make alterations to the productspecifications shown in this catalogue. Alldimensions provided within this catalogue areapproximate and for guidance only.
1
2
3
4
Drill ResistantHardened protection against drill attack.
5
6
8
9
10
11
12
Torque ResistantBuilt in strength against torque attack.
Saw ResistantHardened protection against saw attack.
Force ResistantBuilt in strength against force attack.
Pick ResistantBuilt in protection to resist picking.
Corrosion ResistantProducts conform to appropriate anti-corrosion requirements.
Tamper ResistantBuilt in protection against Tampering.
Fire ResistantProducts conform to appropriate fire testrequirements.
EscapeProducts for use on an escape door.
Key ControlThe products can be included in a keycontrol system.
GuaranteeProducts are guaranteed for a period oftime.
Protected SectionProducts are available as an option on apatented key section.
7
Security FeaturesIntroduct ion How to Specify
Fitt ing Configurat ions
Standards & Approvals
Door Closers Index
• Introduction
Overhead Closers
• BS EN 1154 Classification
• Features and Functions
• Cover Designs
• Cover Finishes
• Range Table
• Power Adjustable Closers
• Transom Concealed Closer
Electro-Mag Closers
• BS EN 1155 Classification
• Features and Functions
• Photo Gallery
• Range Table
• Electro Mags
Floor Springs
• BS EN 1154 Classification
• Features and Functions
• Photo Gallery
• Range Table
• Floor Springs
Automatic Door Systems
• Automatic Door Systems
• Notes Page
D2
D3
D3
D4
D4
D5
D6 - 9
D10
D11
D11
D12
D12
D13 - 14
D15
D15
D16
D16
D17-19
D20 - 21
D22 - 23
Chubb offer a comprehensive range of Door Closersfor architectural specification.
The range includes overhead closers, electro-magnetic closers, floor springs and automatics.
There are a choice of 2 cover designs and a varietyof power engines sourced from the worlds’ leadingcloser manufacturers. A comprehensive range offinishes are available to complement the furnitureranges.
Chubb is accredited with and meets therequirements of BS EN ISO 9001: 1994.
Chubb have developed a series of icons to enablethe process of product specification to be simplified.
From today you can specifically detail yourrequirements for a product, therefore ensuring thatit includes particular security features.
Example 1: If you require an overhead closer thatmeets BS EN 1154 look for the relevant logo.
Example 2: If this closer then needs to conform toappropriate fire test requirements, look for icon 9.
Chubb, Simplifying the Specification Process.
Classifies doorclosers using a 6digit coding system.
Classifies electricallypowered hold-opendevices using a 6digit coding system.
D2
BS EN 1154 BS EN 1155
O v e r h e a d D o o r C l o s e r s
Figure 1
Figure 61
Figure 66
Slide Track
O v e r h e a d D o o r C l o s e r s
Finishes:
BS EN 1154 Class i f icat ion Features and Funct ions
Covers
Two cover designs are available tosuit all but the 1000 series closer.Both are available in a wide choice ofarchitectural finishes.
Covers
Products successfully type-tested for conformity toBS EN 1154.
Power Adjust Shoe
On certain models the power of thecloser can be increased by up to 15%by the positioning of the armset shoe.
Bracket
The provision of a bracketallows the closer to bemounted in the Parallelarm position.
Adjustable Latch
Provides adjustable speed control overthe last few degrees of closingallowing either slowing down thedoor to provide a cushioning effect orspeeding up to overcome a latch.
Arm
Either screw or slideadjustable arm asstandard.
Backcheck
Provides an adjustable cushioningeffect when the door is thrown open.
Adjustable Sweep
Allows adjustment over the closingspeed of a door during the sweepphase.
Delayed Action
Provides an adjustable time delay inthe closing cycle of the door allowingthe disabled, elderly or trolleys topass through the door unhindered.
Power Adjust
Only available on higher specificationmodels, this function provides poweradjustment of the closer when fittedwhich allows the power of the closer tobe matched exactly to the requirementsof the door.
Door Closer Action
This standard classifies door closers using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standards performancerequirements.
Digit 1 - Category of use • Grade 3: For closing doors from at least 105˚.• Grade 4: For closing doors from 180˚ open.
Digit 2 - Durability • Grade 8: 500,000 test cycles completed.
Digit 3 - Test door mass/size Seven grades are identified as shown in the table below where a closer provides a range of power sizes both the minimum and maximum sizes shall be shown.
Digit 4 - Fire behaviour • Grade 0: Not suitable for use on fire/smoke doors.• Grade 1: Suitable for use on fire/smoke doors.
This is assessed outside of BS EN 1154.
Digit 5 - Safety • Grade 1: All door closers are required to satisfy the essential requirement of safety in use.
Digit 6 - Corrosion resistance Five grades are identified according to BS EN1670.• Grade 0: No defined corrosion resistance.• Grade 1: Mild resistance.• Grade 2: Moderate resistance.• Grade 3: High resistance• Grade 4: Very high resistance.
ExampleThe following marking denotes a closer capable of opening to at least 105˚, with a power size of 3, which is suitable for use on fire/smoke doors.
Fire ResistantSuitable for use on fire / smokedoors.
3 8 3 1 1 0
Test door mass/size
Door Closer Test door Recommended doorpower size mass Kg leaf width mm.
1 20 7502 40 8503 60 9504 80 11005 100 12506 120 14007 160 1600
Normal Opening Backcheck
DelaySweep
Latch
Test door mass/size
GuaranteeGuarantee period applicablewhen maintenance instructionsfollowed.
Silver Gold Satin Stainless Steel Brown BronzePolished Stainless Steel
Textured Silver Polished Brass Satin Chrome RALPolished Chrome
D3
C o v e r D e s i g n s
• New style cover for use on Chubb range of closers.• Metal construction, fixing via backplate.
• Metal construction cover for use on Chubb range of closers.• Fixing via backplate.
New Wave Cover (NW)
Standard Cover (STD)
• Silver • Red RAL 3003
• Gold • Dark Red RAL 3005
• Satin Stainless Steel • Green RAL 6016
• Polished Stainless Steel • Yellow RAL 1004
• Brown Bronze • Light Grey RAL 7036
• Textured Silver • Dark Grey RAL 7043
• Polished Brass • Black RAL 9005
• Satin Chrome • White RAL 9016
• Polished Chrome • Blue RAL 5002
• Brown RAL 8017 • Dark Blue RAL 5003
Finishes
66mm
285mm
68mm
66mm
285mm
52mm
//////////////////
D4Note: Examples of covers are shown throughout the catalogue.
Power Adj. Adj. Backcheck Delayed Hold ArmSize Latch Sweep Action Open
New Standard Wave (STD)(NW)
Features & FunctionsCover Designs Finishes
2/3 ● ● 1, 61, 66
3 ● ● 1, 61, 66
1/2/3/4 ● ● ● O 1, 61, 66
1/2/3/4 ● ● ● ● O 1, 61, 66
1/2/3/4 ● ● ● ● ST
2/3/4 ● ● O 1, 61, 66
3/4 ● ● O O 1, 61, 66
2/3/4/5 ● ● O O O 1, 61, 66
3/4/5/6 ● ● ● 1, 61, 66
3/4/5/6 ● ● ● O ST
2/3/4 ● ● ● O –
● 10
● 10
● 10
● 10
● 10
● 10
● 10
● 10
● 10
● 10
10
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
N/A N/A
●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
●
S G SSS PSS BB PB SC PC RAL
O v e r h e a d D o o r C l o s e r s
Fixed Power
Power Adjustable
Fixed Power
C1000
C2003
C2501BCM
C2501DLM
C2511BCM
C2600
C2700
C2800
C2900
C3000
C3100
Security Features
Standards
Fire
Re
sita
ntsion
si
stan
t
Gua
rant
ee
Power Adjustable
Power Adjustable
Transom Concealed
Power Adjustable
BS EN 1154
Key: ST = Slide Track O = Optional Finishes: S = Silver G = Gold SSS = Satin Stainless Steel PSS = Polished Stainless Steel BE = Brown Bronze TS = Textured Silver PB = Polished Brass SC = Satin Chrome PC = Polished Chrome RAL = Various RAL Colours.
* When ordering Door Closers please suffix Pattern Number with Cover Design ie New Wave (NW) or Standard (STD) and Finish.
//////////////////////
TS
44 8 1 1 04 8 1 1 0
1
44 8 1 1 04 8 1 1 0
1
44 8 1 1 04 8 1 1 0
1
44 8 1 1 44 8 1 1
2
44 8 1 1 44 8 1 1
3
54 8 1 1 34 8 1 1
2
D5
3 8 4 0 1 4
3 8 3 0 1 4
3 8 2 0 1 4
O v e r h e a d D o o r C l o s e r s
• Surface mounted overhead door closer for single action doors.• Fixed power: BS EN 1154 spring size 2/3.• 180˚ angle of opening.• Screw adjustable armset.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Suitable for both left and right handed doors opening either in or out.• Independent adjustable sweep and latch valves.• Tested for durability to 100,000 cycles.
• Surface mounted overhead door closer for single action doors.• Fixed power: BS EN 1154 size 3.• 180˚ angle of opening.• Universal fitting - 1 regular, 61 transom, and 66 parallel
arm mount.• Suitable for both left and right handed doors opening either
in or out.• Independent adjustable sweep and latch valves.
F ixed Power
Fixed Power C1000 C2003
Security Features
Standards
●
10
●
10
Power 2/3 3
Latch ● ●
Sweep ● ●
Backcheck
Delay
Hold Open
Arm 1, 61, 66 1, 61, 66
New Wave ●
Standard ●
Finish Options
Features & Functions
Covers
Guarantee
Fire Resistant
C1000
C2003
BS EN 1154
219mm 49mm
44mm
38mm
40mm
210mm
Silver ● ●
Gold ●
Satin Stainless Steel ●
Polished Stainless Steel ●
Brown Bronze ●
Textured Silver ●
Polished Brass ●
Satin Chrome ●
Polished Chrome ●
RAL ●
D6
O v e r h e a d D o o r C l o s e r s
• Surface mounted overhead door closer for single action doors.• Successfully type-tested for conformity to all the requirements of BS EN 1154.• Adjustable power: BS EN 1154 size 1/2/3/4.• 180˚ angle of opening.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Suitable for both left and right handed doors opening either in or out.• Backcheck as standard.• Independent adjustable sweep and latch valves.• Adjustable hold open arm optional.• Optional slide adjustable armset.• Delayed action variant available (C2501DLM).
• Surface mounted overhead door closer for single action doors.• Successfully type-tested for conformity to all the requirements
of BS EN 1154.• Adjustable power: BS EN 1154 size 2/3/4.• 180˚ angle of opening.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Suitable for both left and right handed doors opening either in or out.• Independent adjustable sweep and latch valves.• Adjustable hold open arm optional.• Closer uses Dorma Power Unit TS72.
Power Adjustable
Power AdjustableC2600 Using Dorma Power Unit
C2501BCM • C2501DLM • C2511BCM
BS EN 1154
BS EN 1154
C2501BCM C2511BCM C2600C2501DLM
Security Features
Standards
●
10
●
10
●
10
Power 1/2/3/4 1/2/3/4 2/3/4
Latch ● ● ●
Sweep ● ● ●
Backcheck ● ●
Delay ● (DLM)
Hold Open O ● O
Arm 1, 61, 66 ST 1, 61, 66
New Wave ● ● ●
Standard ● ● ●
Silver ● ● ●
Gold ● ● ●
Satin Stainless Steel ● ● ●
Polished Stainless Steel ● ● ●
Brown Bronze ● ● ●
Textured Silver ● ● ●
Polished Brass ● ● ●
Satin Chrome ● ● ●
Polished Chrome ● ● ●
RAL ● ● ●
Finish Options
Features & Functions
Covers
Guarantee
Fire Resistant
255 - 370mm
47.5mm
69mm
223mm
219mm 49mm
44mm
BS EN 1154 44 8 1 1 04 8 1 1 0
14
4 8 1 1 04 8 1 1 01
44 8 1 1 4
2
D7
O v e r h e a d D o o r C l o s e r s
Power Adjustable
Power Adjustable
• Surface mounted overhead door closer for single action doors.• Successfully type-tested for conformity to all the requirements of BS EN 1154.• Adjustable power: BS EN 1154 size 3/4.• 180˚ angle of opening.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Suitable for both left and right handed doors opening either in or out.• Independent adjustable sweep and latch valves.• Screw adjustable armset.• Adjustable hold open arm optional.• Delayed action available (C2700DL).• Closer uses Dorma Power Unit TS73N.
• Surface mounted overhead door closer for single action doors.• Successfully type-tested for conformity to all the requirements of BS EN 1154.• Adjustable power: BS EN 1154 size 2/3/4/5.• 180˚ angle of opening.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Suitable for both left and right handed doors opening either in or out.• Independent adjustable sweep and latch valves.• Backcheck as option available.• Adjustable hold open arm optional.• Optional slide arm.• Closer uses Jebron Power Unit 9900.
C2700 Using Dorma Power Unit
C2800 Using Jebron Power Unit
BS EN 1154
BS EN 1154
C2700 C2800
Security Features
Standards
●
10
●
10
Power 3/4 2/3/4/5
Latch ● ●
Sweep ● ●
Backcheck O (C2800BC)
Delay O (C2700DL) O (C2800DL)
Hold Open O O (C2800HO)
Arm 1, 61, 66 1, 61, 66
New Wave ● ●
Standard ● ●
Silver ● ●
Gold ● ●
Satin Stainless Steel ● ●
Polished Stainless Steel ● ●
Brown Bronze ● ●
Textured Silver ● ●
Polished Brass ● ●
Satin Chrome ● ●
Polished Chrome ● ●
RAL ● ●
Finish Options
Features & Functions
Covers
Guarantee
Fire Resistant
255 - 370mm
42.5mm
60mm
208mm
55mm
92mm
60mm
260mm
269mm
BS EN 11544
4 8 1 1 44 8 1 13
54 8 1 1 34 8 1 1
2
D8
O v e r h e a d D o o r C l o s e r s
Power Adjustable
• Surface mounted overhead door closer for single action doors.
• To DIN 18263, Part 2.
• Adjustable power: BS EN 1154 size 3/4/5/6.
• 180˚ angle of opening.
• Slide track arm as standard.
• Suitable for both left and right handed doors opening either in or out.
• Independent adjustable sweep, latch and backcheck valves.
• Variant with delayed action available.
• Electro-mag variant available.
• Electro-mag and smoke detector variant available.
C3000
Security Features
Standards
●
10
●
10
Power 3/4/5/6 3/4/5/6
Latch ● ●
Sweep ● ●
Backcheck ● ●
Delay O
Hold Open
Arm 1, 61, 66 ST
New Wave ● ●
Standard ● ●
Silver ● ●
Gold ● ●
Satin Stainless Steel ● ●
Polished Stainless Steel ● ●
Brown Bronze ● ●
Textured Silver ● ●
Polished Brass ● ●
Satin Chrome ● ●
Polished Chrome ● ●
RAL ● ●
Finish Options
Features & Functions
Covers
Guarantee
Fire Resistant
285mm
510mm
39mm
52mm
102mm
66mm
32mm
Power Adjustable
• Surface mounted overhead door closer for single action doors.
• To DIN 18263, Part 2.
• Adjustable power: BS EN 1154 size 3/4/5/6.
• 180˚ angle of opening.
• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.
• Suitable for both left and right handed doors opening either in or out.
• Independent adjustable sweep and latch valves.
C2900
C2900 C3000
32mm
102mm
66mm
285mm52mm
BS EN 1154
D9
O v e r h e a d D o o r C l o s e r s
Security Features
Standards
10
Power 2 - 4
Latch ●
Sweep ●
Backcheck ●
Delay
Hold Open O
Arm
New Wave N/A
Standard N/A
Silver ●
Gold
Satin Stainless Steel
Polished Stainless Steel
Brown Bronze
Textured Silver
Polished Brass
Satin Chrome
Polished Chrome
RAL
Finish Options
Features & Functions
Covers
Guarantee
Fire Resistant
Transom Concealed
• Transom concealed door closer.• Suitable for single and double action doors.• Fully controlled closing with adjustable speed.• Adjustable final closing.• Progressive mechanical backstop.• Door opening angle max. 130° on both sides.• Hold-open points - depending on model (optional) 105° or 90°.• Closer uses Dorma RTS85 Power Unit.
C3100 Using Dorma Power Unit
C3100
Closing Force Size 2 3 4
Spring Strength (Nm) 20 30 40
BS EN 1154
70mm
84mm
73mm
56.5mm
38.5mm
94mm
250mm
328.5mm20.5mm
C3100
Notes
Accessories for double action and centre pivoted single actiondoors (70mm pivot point)
Side Load Installation (SL) End Load Installation (EL)
1 Closer arm with arm channel C3110AC-SL C3110AC-EL2 Closer arm with angle bracket C3120AB-SL C3120AB-EL3 Floor pivot set, total height 27mm C3127FP-SL C3127FP-EL
Floor pivot set, total height 57mm C3157FP-SL C3157FP-EL4 Threshhold pivot set - channel depth 25mm C3125PS-SL C3125PS-EL
Threshhold pivot set - channel depth 40mm C3140PS-SL
BS EN 1154
D10
3 8 4 0 1 4
3 8 3 0 1 4
3 8 2 0 1 4
E l e c t r o - M a g C l o s e r s
BS EN 1155 Class i f icat ion Features and Funct ions
Where do i use an Electromagnetic Closer ?
To hold open fire doors where linked to a suitable fire alarm system. Wherethe power source is cut off when the alarm is triggered the fIre door fittedwith a standard door closer is released as the de-energised magnet and thedoor shuts automatically.
This standard classifies electrically powered hold-open devices using a 6 digit codingsystem. Each digit relates to a particular feature of the product measured against thestandards performance requirements.
Digit 1 - Category of use • Grade 3: For doors for use by the public.
Digit 2 - Durability • Grade 5: 50,000 test cycles completed for electrically powered hold-open devices.
• Grade 8: 500,000 test cycles completed for electrically powered hold-open and free swing door closers and devices that contain operating arms.
Digit 3 - Test door mass/size Five grades and related hold-open power sizes are identified as shown in the table below.Where a closer provides a range of power sizes both the minimum and maximum sizes shall be shown.
Digit 4 - Fire resistance • Grade 1: Suitable for use on fire/smoke doors. This is assessed outside of BS EN 1155.
Digit 5 - Safety • Grade 1: All door closers are required to satisfy the essential requirement of safety in use.
Digit 6 - Corrosion resistance Five grades are identified according to BS EN1670.• Grade 0: No defined corrosion resistance.• Grade 1: Mild resistance.• Grade 2: Moderate resistance.• Grade 3: High resistance• Grade 4: Very high resistance.
ExampleThe following marking denotes a separatehold-open device power size 4 with highresistance to corrosion, which is suitable for use on fire/smoke doors.
3 5 4 1 1 3
Hold-open Test door Recommended doorpower size mass Kg leaf width mm.
3 60 9504 80 11005 100 12506 120 14007 160 1600
Test door mass/size
Finishes: Silver Gold Satin Stainless Steel Brown BronzePolished Stainless Steel
Textured Silver Polished Brass Satin Chrome RALPolished Chrome
For a description of door closer actionssee page D3.
Covers
Two cover designs areavailable in a wide choice ofarchitectural finishes.
D11
Fire ResistantSuitable for use on fire / smokedoors.
GuaranteeGuarantee period applicablewhen maintenance instructionsfollowed.
Door Closer Actions
Normal Opening Backcheck
DelaySweep
Latch
E l e c t r o - M a g C l o s e r s
Electro-Mag Closers
Page
D14C3400EM Page
D14C3200EM Page
D13
C3200EM
C3300EM
C3400EM
C3510G for wall and floorfixing
C3550G for wall and floorfixing
C3510U for concealed fixing
C3550U for concealed fixing
C3510A with test push button
C3550A with test push button
Power Adj. Adj. Backcheck Delayed Hold ArmSize Latch Sweep Action Open
New Standard Wave
Features & FunctionsCovers Finishes
2/3/4/5 ● ● ● O ST
3/4 ● ● O 1, 61, 66
4 ● ● ● 1, 61, 66
N/A N/A N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A N/A N/A
● 10
● 10
● 10
10
10
10
10
10
10
● ●
● ●
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ●
E l e c t r o - M a g C l o s e r s
Electro-Mag Closers
Electro-Mag Closers
Electro-Mag Closers
Security Features
Standards
Fire
Re
sita
ntsion
si
stan
t
Gua
rant
ee
BS EN 1155
C3510/50C3300EM Page
D13
S G SSS PSS BB PB SC PC RAL//////////////////////
TS
Key: O = Optional Finishes: S = Silver G = Gold SSS = Satin Stainless Steel PSS = Polished Stainless Steel BE = Brown Bronze TS = Textured Silver PB = Polished Brass SC = Satin Chrome PC = Polished Chrome RAL = Various RAL Colours.
43 8 1 1 3
3
D12
4 8 4 1 1 4
E l e c t r o - M a g C l o s e r s
Electro-Mag
Electro-Mag
• Successfully type-tested for conformity to all the requirements of BS EN 1155.• Hold-open and free swing door control.• Fixed power BS EN 3/4.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Non-handed.• Latch and closing speed control.• Hold-open from 70° to 180°.• Closer uses Jebron Power Unit 9870.
• As C3000 except for:
• C3200-EM with electro-magnetic brake stay.
• C3200EM-R with electro-magnetic brake stay and integrated smoke detector
with mains receiver.
C3300EM Using Jebron Power Unit
C3200EM
BS EN 1155
Security Features
Standards
●
10
●
10
Power 2/3/4/5 3/4
Latch ● ●
Sweep ● ●
Backcheck ●
Delay O
Hold Open O
Arm ST 1, 61, 66
New Wave ● ●
Standard ● ●
Silver ● ●
Gold ● ●
Satin Stainless Steel ● ●
Polished Stainless Steel ● ●
Brown Bronze ● ●
Textured Silver ● ●
Polished Brass ● ●
Satin Chrome ● ●
Polished Chrome ● ●
RAL ● ●
Finish Options
Features & Functions
Covers
Guarantee
Fire Resistant
55mm
92mm
60mm
260mm
269mm
285mm
510mm
52mm
39mm
66mm
32mm
C3200EM C3300EM
102mm
BS EN 11554
3 8 1 1 33
D13
E l e c t r o - M a g C l o s e r s
Electro-Mag
Magnets
• Combination of hydraulic door closer and electro-magnetic hold-open.
• Door hold-open at opening angles between 75° and 180°.
• Suitable for standard doors up to 1250 mm.
• Complies with DIN 18263 for fire doors up to 1125 mm.
• Optional free-swing arm assembly.
• Closer uses Dorma Power
Unit TS73EMF.
• C3510G, C3550G for wall and floor fixing.• C3510U, C3550U for concealed fixing.• C3510A, C3550A with test push button.• Complete with polarity reversal protection.• For floor fixing use floor bracket (supplied as accessory).• Protector category: IP40, C3510A. C355OA in conjunction
with floor bracket: IP43.• Power input: 1.5 W.• Holding Force:
• The hold-open can also be released by simply giving thedoor a sharp tug in the closing direction (100Nm only).
• Magnetic armature plates:- CMAG ball jointed, self adjusting to the door opening angle.- CMAT telescopic, for relatively large distances between wall
and door. Length of travel approx. 20mm.- CMAW, for extreme angles. Adjustment range ±60°.
C3400EM Using Dorma Power Unit
C3500 Range from Dorma for Fire Prevention
Security Features
Standards
●
10
Power 4
Latch ●
Sweep ●
Backcheck
Delay
Hold Open ●
Arm 1, 61, 66
Standard N/A
New Wave N/A
Silver ●
Gold ●
Satin Stainless Steel
Polished Stainless Steel
Brown Bronze
Textured Silver
Polished Brass
Satin Chrome
Polished Chrome
RAL
Finish Options
Features & Functions
Covers
Guarantee
Fire Resistant
500 Nm C3550G, C3550U, C3550A100 Nm C3510G, C3510U, C3510A
BS EN 1155
60mm
45.5mm
293mm
C3400EM
C3510GC3550G
C3510UC3550U
C3510AC3550A
CMAG CMAT CMAW
BS EN 1155
D14
4 8 4 1 1 4
F l o o r s p r i n g s
BS EN 1154 Class i f icat ion Features and Funct ions
Single / Double Swing Floor Springs
• Floor mounted door control for single /double swing applications.
• Successfully type-tested for conformity to all the requirements of BS EN 1154.
Cement Box
Adjustable.
Interchangeable Spindles
Site interchangeable forease of installation.
Adjustable Delayed Action (3)
Selective between180° and 70° (C3700FS)105° and 75° (C3600FS).
Hydraulic Closing
2 speed action fromapproximately 180°.
Backcheck (2)
Mechanical backcheckat approx 85° and 165°.
Closing Speeds (1)
15 or 28 Nm (C3700FS)15, 32 or 53 Nm (C3600FS).
Optional Hold Open (3)
90° standard hold open(C3700FS) between 75° and175° (C3600FS).
Universal Fitting
Suitable for left or right hand singleaction and centre pivoted double actiondoors.
This standard classifies door closers using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standards performancerequirements.
Digit 1 - Category of use • Grade 3: For closing doors from at least 105˚.• Grade 4: For closing doors from 180˚ open.
Digit 2 - Durability • Grade 8: 500,000 test cycles completed.
Digit 3 - Test door mass/size Seven grades are identified as shown in the table below where a closer provides a range of power sizes both the minimum and maximum sizes shall be shown.
Digit 4 - Fire behaviour • Grade 0: Not suitable for use on fire/smoke doors.• Grade 1: Suitable for use on fire/smoke doors.
This is assessed outside of BS EN 1154.
Digit 5 - Safety • Grade 1: All door closers are required to satisfy the essential requirement of safety in use.
Digit 6 - Corrosion resistance Five grades are identified according to BS EN1670.• Grade 0: No defined corrosion resistance.• Grade 1: Mild resistance.• Grade 2: Moderate resistance.• Grade 3: High resistance• Grade 4: Very high resistance.
ExampleThe following marking denotes a closer capable of opening to at least 105˚, with a power size of 3, which is suitable for use on fire/smoke doors.
Fire ResistantSuitable for use on fire / smokedoors.
3 8 3 1 1 0
Test door mass/size
Door Closer Test door Recommended doorpower size mass Kg leaf width mm.
1 20 7502 40 8503 60 9504 80 11005 100 12506 120 14007 160 1600
Test door mass/size
GuaranteeGuarantee period applicablewhen maintenance instructionsfollowed.
Electromagnetic Action
Variants available.
Single Swing Components Double Swing Components
Finishes: Polished Brass Satin Stainless Steel Polished Stainless Steel
Electromagnetic Action (4)
Variants available.
Universal Cover Plate
Adjustable for right or left handsingle hand applications.
Floorspring Actions
D15
Floorspr ings
C3600FS Page
D17 C3600EM-FS Page
D17 C3700FS Page
D18 C3800FS • C3900FS Page
D18
F l o o r s p r i n g s
C3600FS
C3600EM-FS
C3700FS
C3700FS (Hold Open)
C3800FS
C3900FS
Power Adj. Adj. Backcheck Delayed Hold ArmSize Latch Sweep Action Open
New StandardWave
Features & FunctionsCovers Finishes
4 ● ● ● ● ● n/a
4 ● ● ● ● n/a
1 - 4 ● ● ● n/a
5 - 7 ● ● ● ● n/a
1 - 4 ● ● ● O n/a
4 ● ● ● O n/a
10
● 10
● 10
10
● 10
● 10
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
F l o o r s p r i n g s
Floorspr ings
Floorspr ings
SecurityFeatures
Standards
Fire
Re
sita
nt
osio
n
Resi
stan
t
Gua
rant
ee
BS EN 1154
S G SSS PSS BB PB SC PC RAL//////////////////////
TS
43 8 1 1 4
1
73 8 0 1 4
5
43 8 1 1 3
1
3 8 4 1 1 3
3 8 4 0 1 4
4 8 4 1 1 4
D16
(BS EN 1155)
F l o o r s p r i n g s
Floorspr ings
Electro-Mag Floorspr ing
• Universal Floorspring for all types of standard doors.• Fixed power: BS EN 4.• Non-handed model.• Adjustable closing speed, (15, 32 or 53Nm).• Mechanical backcheck.• Adjustable latching action.• Floorspring uses Dorma Power Unit BTS80.
• Complete with electro-hydraulic hold-open.• Enables fire and smoke check doors to be held open at
opening angles between approx. 75° and 175° with onlyvery slight fall-back.
• In the event of an alarm or power failure, the hold-openis released and the door closer closes the door.
• The hold-open can also be released by simply giving thedoor a sharp tug in the closing direction.
• Floorspring uses Dorma Power Unit BTS80EMB.
C3600FS Using Dorma Power Unit
C3600EM-FS Using Dorma Power Unit
Security Features
Standards
10
10
●
10
10
Power 4 4
Latch ● ●
Sweep ● ●
Backcheck ● ●
Delay ●
Hold Open ● ●
Arm n/a n/a
New wave n/a n/a
Standard n/a n/a
Finish Options
Features & Functions
Covers
Guarantee
Fire Resistant
BS EN 1154
60mm
78mm
341mm
60mm
78mm
341mm
C3600FS C3600EM-FS
Silver
Gold
Satin Stainless Steel ● ●
Polished Stainless Steel ● ●
Brown Bronze
Textured Silver
Polished Brass ● ●
Satin Chrome
Polished Chrome
RAL
D17
3 8 4 0 1 4 4 8 4 1 1 4(BS EN 1155)
F l o o r s p r i n g s
Floorspr ings
Accessor ies
• Ideal for all single and double action doors with widths of up to 1100mm.• Adjustable screw for easy setting of the closing force.• Variable power: BS EN 1 - 4.• Non-handed model.• Adjustable closing speed, (15 or 28Nm).• Mechanical backcheck.• Optional variant with 90° or 105° hold-open available.• Floorspring uses Dorma Power Unit BTS75V.
Double Action Accessories for Steel, Aluminium and Timber Doors
• Double action top centre. No. C3610DTC
• Cover plate. No. C3620CP
• Double action bottom strap, for door weights up to 300kg. No. C3630DAS
C3700FS Using Dorma Power Unit
Accessories for C3600, C3700 Ranges
50mm
82mm
275mm
Security Features
Standards
●
10
10 10
Power 1 - 4
Latch ●
Sweep ●
Backcheck ●
Delay
Hold Open
Arm n/a
New wave n/a
Standard n/a
Finish Options
Features & Functions
Covers
Guarantee
Fire Resistant
BS EN 1155
C3700FS
Accessories for Single Action Timber Doors, for Flush Closing Doors
• Single action top centre, non-handed. No. C3640STC
• Single action door straps. No. C3650SDS
• Standard spindles up to + 50mmavailable on request. Silver
Gold
Satin Stainless Steel ●
Polished Stainless Steel ●
Brown Bronze
Textured Silver
Polished Brass ●
Satin Chrome
Polished Chrome
RAL
43 8 1 1 4
1
D18
105mm
50mm
105mm
307mm
F l o o r s p r i n g s
Floorspr ing
Electro-Mag Floorspr ing
• Manually operated universal floorspring for double swingand single swing applications.
• Variable power: BS EN 1 - 4.• Non-handed model 180° opening.• Adjustable closing speed.• Backcheck at 90°.• Floorspring uses Jebron
Power Unit 2950.
• Electro-magnetic floorspring.
As C3800FS but with the following additions:
- Alarm activated electro-magnetic hold-open, with size 4 power.
- Supplied with 1m conduit and 3m flexible cable complete
with connections.
- Operating voltage: 24.V.dc power consumption 2.0w.
- Not suitable for external or wet area applications.
Accessories: Suitable for both C3800FS and C3800EM-FS• Double action top centre, SS or PB finishes - C3810DTC
• Cover plates, SS or PB finishes - C3820CP.
• Double action strap, zinc plated - C3830DAS.
• Single action top centre, SS or PB finishes - C3840STC.
• Single action strap and cover, SS or PB finishes - C3850SAC.
C3800FS Using Jebron Power Unit
C3800EM-FS
Security Features
Standards
●
10
10
●
10
10
Power 1 - 4 4
Latch ● ●
Sweep ● ●
Backcheck ● ●
Delay O O
Hold Open
Arm n/a n/a
New wave n/a n/a
Standard n/a n/a
Finish Options
Features & Functions
Covers
Guarantee
Fire Resistant
EN1155
C3800FS C3800EM-FS
105mm
50mm
105mm
307mm
Universal Cover Plate
Single Swing
Double Swing
Series Unit
Spindles 5 - 50mmS5 S10 S20 S30 S40 S50
CementBox
FP/SL
Silver
Gold
Satin Stainless Steel ● ●
Polished Stainless Steel ● ●
Brown Bronze
Textured Silver
Polished Brass ● ●
Satin Chrome
Polished Chrome
RAL
43 8 1 1 3
13 8 4 1 1 3
D19
A u t o m a t i c D o o r S y s t e m s
Typical Appl icat ions
What Type of Door?
Straight Curved Automatic Low Energy Folding Swivelling
D20
Sliding Doors Swing Doors Space Saving DoorsIn association with Dorma, Chubb are pleasedto offer the supply and installation of:
• Automatic door operators and complete door packages
• Revolving doors
• Glass partition and door systems
Why specify automatic doors?
• Aesthetically pleasing and inviting modern entrance.
• Improved access for all door users.
• Easy access for those with young children, pushing prams, pushchairs etc.
• Unhindered access and increased independence for people with walking difficulties, elderly people and disabled people.
• Option of controlled access via remote operation.
• Option of secure access via cardswipe, numeric keypad etc.
What about safety?
All DORMA automatic doors come withcomprehensive safety systems as standard toensure that the doors open and close safely atall times. All DORMA installations are CEcertified and are carried out by our qualifiedengineers to comply with BS 7036.
What about quality?
All DORMA automatic door operators areindividually and rigorously tested beforeleaving the manufacturing plant in Ennepetal,Germany (ISO9002/BS 5750 Pt.2.) All DORMAautomatic door operators are offered with a 12month guarantee. DORMA offers acomprehensive range of maintenanceprogrammes covering automatic, manual andindustrial doors.
Straight - ES range• Available in single sliding, bi-parting or telescopic
configurations. Optional breakout safety system.Curved - BST• Individually designed from gentle curves to semi-
curves.
Automatic - ED 200 range• ED200 offers a closer with a range of arm types.• ED200i offers a concealed closer with no arm.Low Energy - ED800• Offers assisted opening of swing doors.• Ideal for use by elderly or disabled people.
Folding - FFT• Ideal for a restricted opening or awkward layout.Swivelling - RST• Unique swivelling action.• Combines excellent space-saving with elegant
design.
from
from
D o o r S e r v i c e a n d M a i n t e n a n c e
Brit i sh Standards
“Self closing devices should be examined at six monthly intervals to ensurethat the door is closing properly and any necessary adjustments made to theclosing and latching speeds”.
British Standard BSB214“Building Components (Ironmongery)
“To ensure safe operation, long term reliability and working efficiency, a powered doorinstallation (including safety devices and safety systems) should be:
1. Regularly maintained to the manufacturer’s specification by the powered door system authorised technician.
2. Annually inspected in accordance with the recommendations of this standard by completion of the authorised technician checklist...”
British Standard BS7036 April 1996“Safety at powered doors for pedestrian use”
from
from
Notes
Dorma offer:
• Wide selection of systems to suit your particular application.
• Maintenance for all door products.
• Nationwide coverage throughout the UK.
• Customer service telephone back-up.
• Guaranteed product.
Why is maintenance important?
Every door needs to be maintained if it is tooperate correctly and safely.
It reduces breakdowns and inconvenience.
If a preventable accident occurs you could beheld accountable.
It makes economic sense reducing the long termcost of operating the door.
Notes
D o o r C l o s e r s
D22
Notes
D o o r C l o s e r s
D23
Es
ca
pe
Ha
rd
wa
re
• S i n g l e P a n i c B o l t
• D o u b l e R e b a t e d
P a n i c S e t
• P a n i c L a t c h
• P u s h P a d L a t c h
• O u t s i d e A c c e s s D e v i c e
E s c a p e H a r d w a r e
E s c a p e H a r d w a r e
Note: We have made every effort to ensure that atthe time of going to print all information shown inthis catalogue is correct. However, in our efforts tocontinually improve our products and offer only thehighest levels of security and quality we reserve theright to make alterations to the productspecifications shown in this catalogue. Alldimensions provided within this catalogue areapproximate and for guidance only.
1
2
3
4
Drill ResistantHardened protection against drill attack.
5
6
8
9
10
11
12
Torque ResistantBuilt in strength against torque attack.
Saw ResistantHardened protection against saw attack.
Force ResistantBuilt in strength against force attack.
Pick ResistantBuilt in protection to resist picking.
Corrosion ResistantProducts conform to appropriate anti-corrosion requirements.
Tamper ResistantBuilt in protection against Tampering.
Fire ResistantProducts conform to appropriate fire testrequirements.
EscapeProducts for use on an escape door.
Key ControlThe products can be included in a keycontrol system.
GuaranteeProducts are guaranteed for a period oftime.
Protected SectionProducts are available as an option on apatented key section.
7
Security FeaturesIntroduct ion How to Specify
Keying Groups Standards & Approvals
Escape HardwareIndex• Introduction
• BS EN 1125 Classification
• BS EN 179 Classification
• Features and Functions
• Photo Gallery
• Range Table
• Single Panic Bolt
• Double Rebated Panic Set
• Panic Latch
• Panic Pad Latch
• Outside Access Devices
• Notes Page
E2
E3
E3
E3
E4
E4
E5
E5
E6
E6
E6
E7
Chubb offer a comprehensive range of EscapeHardware which are ideal for commercial andindustrial use.The range includes variants for single doors anddouble rebated doors as well as outside accessdevices.A comprehensive choice of finishes are available tomeet customer requirements.
Throughout the catalogue you will see a columnheaded.
The information shown under this heading canhelp you identify which products can be KeyedAlike or Masterkeyed.
The products that can be keyed to work with otherproducts are given a group code.
KA - means the product can be Keyed Alike withmore of the same product.
MK - means the product can be Masterkeyed withmore of the same product.
A Group Letter (eg A) means the product can beKeyed Alike or Masterkeyed with more of the sameproduct and with other products listed in the samegroup.
For the complete range of products and theirkeying groups, see the chart in the introductionsection. 2 keys are supplied as standard, however see the
price list for any variations.
Chubb is accredited with andmeets the requirements of BS EN ISO 9001: 1994.
Chubb have developed a series of icons to enablethe process of product specification to be simplified.
From today you can specifically detail yourrequirements for a product, therefore ensuring thatit includes particular security features.
Example 1: If you require a panic bolt for a doublerebated door that has a 10 year Guarantee, look forthe Guarantee icon (number 12) in the range tableon page 4 and then on subsequent pages wherefurther information is supplied.
Example 2: If this panic bolt then needs to provideparticular resistance to Corrosion, look for icon 8.
Chubb, Simplifying the Specification Process.
Key ControlPan-European standard which classifiespanic exit devices.
Pan-European standard which classifiesemergency exit devices.
Keys
E2
BS EN 1125
BS EN 179
E s c a p e H a r d w a r e
Finishes:
Features and Funct ions
Double Rebated Panic SetFor double rebated doors.
Single Panic BoltTwo point locking for singledoors.
Oval Knob Handle
Escape HardwareProducts that meet BS EN 179 (i.e. emergency exit device) should only be used where building occupants are familiar with theemergency exit and its hardware and where panic situations are not foreseen. If there is any doubt about conditions relatingto the building occupancy, then devices covered by BS EN 1125 (i.e. Panic devices) should be used.
Once the pushbar has beendepressed the bolts areheld in the open positionuntil the door is closed.
Product is suitable for left or righthand doors, (outward opening only).
Panic Pad LatchSingle point locking forsingle doors.
Push Pad LatchEmergency escape devicefor single doors.
Tamper ProtectionConcealed fixings (outside accessdevices only).
Protected SectionProduct can be used on a patented keysystem, (outside access device only).
Corrosion ResistantProducts meet Grade 3 according toEN1670.
Fire ResistantSuitable for use on fire / smoke doorassemblies.
EscapeProducts for use on escape door.
Key ControlProducts can be masterkeyed or keyedalike (outside access devices).
GuaranteeGuarantee period applicable whenused with original Chubb keys (outsideaccess devices) and maintenanceinstructions followed.
BSEN1125 Class i f icat ionThis standard classifies panic exit devices by using a 9 digit coding system. Each digit relates to aparticular feature of the product measured against the standards performance requirements.
Digit 1 - Category of use• Grade 3: High frequency use by public and others with little incentive to exercise care.
Digit 2 - Durability• Grade 6: 100,000 test cycles completed. • Grade 7: 200,000 test cycles completed.
Digit 3 - Test door mass/size• Grade 5: Up to 100kg. • Grade 6: Up to 200kg.
Digit 4 - Fire behaviour• Grade 0: Not approved for use on fire/smoke door assemblies.• Grade 1: Suitable for use on fire/smoke door assemblies. This is assessed outside of EN1125.
Digit 5 - Safety• Grade 1: All exit devices are required to satisfy the essential requirement of safety in use.
Digit 6 - Corrosion resistanceTwo grades are identified according to EN1670.
• Grade 3: High resistance. • Grade 4: Very high resistance.
Digit 7 - Security• Grade 2 Panic devices are primarily for the operation of a door from the inside. Safety
considerations will always be given priority over security.
Digit 8 - Projection of device• Grade 1: Projection up to 150mm (standard). • Grade 2: Projection up to 100mm (low projection).
Digit 9 - Type of device• Type A: Panic device with push bar operation. • Type B: Panic device with touch bar operation.
ExampleThe following marking denotes a panic exit device tested to 200,000 operations for a door mass up to 200kg. Suitable for fire door use with high corrosion resistance and low push bar projection.
BSEN179 Class i f icat ion
Digit 4 - Fire behaviour• Grade 1: Suitable for use on fire/smoke door assemblies. This is assessed outside of EN179.
Digit 7 - SecurityDevices to provide resistance to: • Grade 2: 1,000N. • Grade 3: 2,000N. • Grade 4: 3,000N.
Digit 9 - Type of device• Type A: Emergency device with lever handle operation.• Type B: Emergency device with push pad operation.
ExampleThe following marking denotes an emergency exit device tested to 200,000 operations for a door mass up to 200kg. Suitable for fire door use with high corrosion resistance and low push bar projection.
3 7 6 1 1 4 2 2 B
3 7 6 1 1 3 2 2 BSilver Gold Satin Chrome Polished Chrome RALPolished Brass
Square Knob Handle
Types of Escape Hardware
Outside Access Devices
Dogging
Universal Handing
Classification for BS EN 179 as BS EN 1125 above with the exception of points below.
E3
//////////////////Textured Silver
E s c a p e H a r d w a r e
C801 Page
E5Page
E6Page
E6C802 Page
E5 C803 Page
E6 C805 • C806C804
Escape Hardware
Universal ‘Dogging’ Rebated Handed Doors
Features & Functions Finishes
n/a n/a ● ● ● n/a 10
n/a n/a ● ● n/a 10
n/a n/a ● ● ● n/a 10
n/a n/a ● ● ● n/a 10
O ● ● ● A 10
O ● ● ● A 10
Silver GoldPolished
BrassSatin
ChromePolishedChrome
RAL
E s c a p e H a r d w a r e
Single Panic Bolt
Panic Latch
C801
C802
C803
C804
C805C806
Security Features
Standards
Esca
pe
Gua
rant
ee
Fire
Re
sita
nt
Prot
ecte
d S
ecti
onTa
mpe
r Re
sist
ant
Key
Cont
rol
Corr
osio
n
resi
stan
t
Push Pad Latch
Outs ide Access Devices
●
●
●
●
●
●
●
● ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
BS EN1125 BS EN179
3 7 6 1 1 3 2 2 A
3 7 6 0 1 3 2 2 A
3 7 6 1 1 3 2 2 A
3 7 6 1 1 3 4 2 B
Double Rebated Panic Set
Key: A = Masterkey GroupingE4
/////////////////////////////TeturedSilver
Corrosionresistant
E s c a p e H a r d w a r e
• Suitable for outward opening doors.• Suitable for timber and metal doors.• Non-handed for maximum flexibility.• Can be operated from outside with outside
access device.• Self adjusting trip action device.• 20mm top and bottom bolt throw.
• Suitable for use on double rebated outward opening doors.• Suitable for timber and metal doors.• Non-handed for maximum flexibility.• Can be operated from outside with outside access device.• Self adjusting trip action device.
S ingle Panic BoltC801
Double Rebated Panic SetC802
//////////////////////////////////
C801 C802
Security Features
Standards
Universal Handed ● ●
‘Dogging’ ● ●
Rebated Doors ●
Finishes
Features & Functions
KeyControl
Escape
Fire Resistant
Guarantee
TamperResistant
ProtectedSection
Silver ● ●
Gold ● ●
Textured Silver ● ●
Polished Brass ● ●
Satin Chrome ● ●
Polished Chrome ● ●
RAL ● ●
BS EN 1125
BS EN 179
n/a
n/a
●
●
●
n/a
10
n/a
n/a
●
●
n/a
10
2440mm
55mm
155mm
840mm
98mm
2440
mm
55mm55mm
155mm
98mm
55mm
840mm 840mm
E5
3 7 6 1 1 3 2 2 A 3 7 6 0 1 3 2 2 A
E s c a p e H a r d w a r e
• Suitable for outward opening doors.• Suitable for timber and metal doors.• Non-handed for maximum flexibility.• Can be operated from outside with outside access device.
• Suitable for outward opening doors.• Suitable for timber and metal doors.• Non-handed for maximum flexibility.• Can be operated from outside with outside access
device.
• Non-handed for maximum flexibility.• Oval knob handle for easy operation.• Suitable for use with C801, C802, C803, and C804.• Concealed fixing.
• Non-handed for maximum flexibility.• Square style knob handle for easy operation.• Suitable for use with C801, C802, C803, and C804.• Concealed fixing.
Panic Latch Panic Pad LatchC803
Outside Access DeviceC805 C806
55mm
155mm
55mm
840mm 98mm
55mm
155mm
60mm 29mm
136mm
78mm
60mm
136mm
74mm
32mm
C804
E6
Security Features
Standards
Finish Options
Corrosionresistant
//////////////////////////////////
C803 C804 C805 C806
Security Features
Standards
Universal Handed ● ● ● ●
‘Dogging’
Rebated Doors
Finishes
Features & Functions
KeyControl
Escape
Fire Resistant
Guarantee
TamperResistant
ProtectedSection
Silver ● ● ● ●
Gold ● ● ● ●
Textured Silver ● ● ● ●
Polished Brass ● ● ● ●
Satin Chrome ● ● ● ●
Polished Chrome ● ● ● ●
RAL ● ● ● ●
BS EN 1125
BS EN 179
n/a
n/a
●
●
●
n/a
10
n/a
n/a
●
●
●
n/a
10
●
●
●
●
A
10
●
●
●
●
A
10
3 7 6 1 1 3 2 2 A
3 7 6 1 1 3 4 2 B
H i n g e s
Hin
ge
s• B r a s s
• S t a i n l e s s S t e e l
• Z i n c P l a t e d
• E l e c t r o B r a s s e d
• C o l o u r C o a t e d
H2
Note: We have made every effort to ensure that atthe time of going to print all information shown inthis catalogue is correct. However, in our efforts tocontinually improve our products and offer only thehighest levels of security and quality we reserve theright to make alterations to the productspecifications shown in this catalogue. Alldimensions provided within this catalogue areapproximate and for guidance only.
Introduct ion How to SpecifyHinges Index
• Introduction
• BS7352: 1990
• Features & Functions
• Photo Gallery
• Range Table
• Product Details
• Notes
H2
H3
H3
H4
H5
H6-9
H10-11
Chubb offer a comprehensive range of hingesfor both architectural specification andresidential use.
These include Steel, Stainless Steel, Brass andheavy duty variants to suit various weights ofdoors.
Chubb is accredited with and meets therequirements of BS EN ISO 9001: 1994
Chubb have developed a series of icons to enable theprocess of product specification to be simplified.
From today you can specifically detail yourrequirements for a product, therefore ensuring that itincludes particular security features.
Example:
1) If you require a hinge that conforms to BS7352,simply check the standards column to see whichgrades are available.
2) If this hinge then needs to provide particularresistance to fire, look for icon number 9.
Chubb, Simplifying the Specification Process.
H i n g e s
Security Features
1
2
3
4
Drill ResistantHardened protection against drill attack.
5
6
8
9
10
11
12
Torque ResistantBuilt in strength against torque attack.
Saw ResistantHardened protection against saw attack.
Force ResistantBuilt in strength against force attack.
Pick ResistantBuilt in protection to resist picking.
Corrosion ResistantProducts conform to appropriate anti-corrosion requirements.
Tamper ResistantBuilt in protection against Tampering.
Fire ResistantProducts conform to appropriate fire test requirements.
EscapeProducts for use on an escape door.
Key ControlThe products can be included in a keycontrol system.
GuaranteeProducts are guaranteed for a period oftime.
Protected SectionProducts are available as an option on apatented key section.
7
Standards & ApprovalsProducts endorsed with the Kitemark havepassed a strict testing procedure under thecontrol of the British Standards Institution.
BS7352: 1990
H3
H i n g e s
Finishes
Features and Funct ionsBS7352:1990
• BS7352 Classification applies when 3 hinges arefitted.
• When non backcheck closers are fitted 20%must be added to the effective door weight andthe weight should be doubled when a‘backcheck’ closer is fitted.
Key
D.S.W. = Double Steel Washered
D.S.S.W. = Double Stainless Steel Washered
D.P.B.W. = Double Phosphor Bronze Washered
H.D. = Heavy Duty
Aluminium
Chrome
Dark Red RAL 3005
Black RAL 9005
Self Colour
Zinc Plate
Green RAL 6016
White RAL 9016
Polished Brass
Electro Brass
Yellow RAL 1004
Blue RAL 5002
Stainless Steel
Brown RAL 8017
Light Grey RAL 7038
Dark Blue RAL 5003
Polished Stainless Steel
Red RAL 3003
Dark Grey RAL 7043
Classification of Hinges
ClassMax. Weight Max. Annual
of Door Operations
1 10KG 5,000
2 20KG 5,000
3 20KG 25,000
4 40KG 25,000
5 40KG 200,000
6 40KG 500,000
7 60KG 500,000
8 80KG 200,000
9 120KG 200,000
Washer Type
Pin MaterialFire Resistant Products successfully completeda fire test.
GuaranteeGuarantee period applicablewhen maintenance andinstructions followed.
The choice of material for the hinge,pin is dependant on the environmentin which the hinges are to be fitted.
Washered hinges are of ahigh grade andrecommended formedium to heavy dutyapplications.
Ball Bearing
Ball bearing hinges are ofa very high grade and arerecommended for usewith door closers andheavy duty applications
H4
H i n g e s
Self Colour Sol idDrawn Brass Butt
CH500Page
H6
CH500/1 = 1” x 3/4”CH500/2 = 11/2” x 7/8”CH500/3 = 2” x 11/8”CH500/4 = 21/2” x 13/8”CH500/5 = 3” x 15/8”CH500/6 = 4” x 23/8”CH500/7 = 4” x 25/8”CH500/8 = 4” x 3”CH500/9 = 5” x 3”CH500/10 = 6” x 3”
CH504 = 21/2”
CH512/1 =4” x 3” x 3mm
CH512/2 =4” x 4” x 3mm
CH516/1 =3” x 2” x 3mm
CH516/2 =4” x 25/8” x 3mm
Self Colour H.D.Sol id Drawn Brass Butt
CH501Page
H6
Sol id Drawn Pol i shed BrassButts c /w Screws
CH502Page
H6
Sol id Drawn P.B.Counter F lap Hinge
CH503Page
H6
Self Colour Sol id DrawnBrass Stormproof Butt
P CH504Page
H6
Sol id Drawn Pol i shed BrassPar l iament Hinge
CH505Page
H6
Self Colour D.S .W.Brass Butts
P CH506Page
H7
Pol ished Brass D.S .W. Butts
CH507Page
H7
D.P.B.W. Pol i shedBrass Butts
CH508Page
H7
D.S.S .W. AluminiumButts c /w Screws
CH509Page
H7
D.S.S .W. Pol i shedBrass Butts
CH510Page
H7
D.P.B.W. Pol i shedBrass Butts
P CH511Page
H7
4 Bal l Bear ing BrassButts c /w Screws
CH512Page
H8
Stainless Steel P la in Buttsc /w Screws
CH513Page
H8
S. Steel WasheredButts c /w Screws
P CH514Page
H8
S. Steel 2 Bal l Bear ingButt c /w Screws
CH515Page
H8
Chrome Plated D.P.B.W.Butts c /w Screws
P CH516Page
H8
Light Butts Z .P. - E .B.or Colour Coated
CH517Page
H8
Strong Butts Z .P. - E .B.or Colour Coated
CH518Page
H9
Ris ing Butt HingeZ.P. and E.B.
P CH519Page
H9
CH501/1 = 3” x 15/8”CH501/2 = 4” x 25/8”
CH502/1 = 1” x 3/4”CH502/2 = 11/2” x 7/8”CH502/3 = 2” x 11/8”CH502/4 = 21/2” x 13/8”CH502/5 = 3” x 15/8”CH502/6 = 3” x 2”CH502/7 = 4” x 25/8”
CH503 = 11/4” x 4”
CH509/1 =3” x 2” x 3mm
CH509/2 =4” x 25/8” x 3mm
CH508/1 = 3” x 2”CH508/2 = 4” x 25/8”CH508/3 = 4” x 3”CH508/4 = 4” x 4”CH508/5 = 6” x 4”
CH507/1 = 3” x 2”CH507/2 = 4” x 25/8”CH507/3 = 4” x 3”CH507/4 = 5” x 3”
CH510/1 =3” x 2” x 3mm
CH510/2 =4” x 25/8” x 3mm
CH510/3 =4” x 3” x 4mm
CH511/1 =3” x 2” x 3mm
CH511/2 =4” x 25/8” x 3.5mm
CH511/3 =4” x 3” x 4mm
CH513/1 =3” x 2” x 1.5mm
CH513/2 =4” x 3” x 2mm
CH505/1 = 4” x 2” x 4mmCH505/2 = 4” x 3” x 5mmCH505/3 = 4” x 4” x 6mm
CH515/1 =4” x 3” x 2.5mm
CH515/2 =4” x 3” x 3mm
CH506/1 = 3” x 2”CH506/2 = 4” x 25/8”CH506/3 = 4” x 3”CH506/4 = 5” x 3”
CH517/1 = 3” x 2”CH517/2 = 4” x 25/8”
CH518/1 = 3” x 2”CH518/2 = 4” x 25/8”
CH519/1 = 3” x 23/4”CH519/2 = 4” x 23/4”
CH514 =4” x 3” x 2mm
*Details of metric sizes are supplied on page H9.
CH500 Self colour solid drawn brass
CH501 Self colour heavy duty solid drawn brass
CH502 Solid drawn polished brass butts
CH503 Solid drawn polished brass counter flap hinge
CH504 Self colour solid drawn brass stormproof butt
CH505 Solid drawn polished brass parliament hinge
CH506 Self colour D.S.W. brass butts
CH507 Polished brass D.S.W. butts
CH508 Polished brass D.P.B.W. butts
CH509 D.S.S.W. Aluminium butts
CH510 D.S.S.W. Polished brass butts
CH511 D.P.B.W. Polished brass butts
CH512 4 Ball bearing pol. brass butts
CH513 Stainless Steel; plain butts
CH514 Stainless Steel washered butts
CH515 Stainless Steel 2 ball bearing butts
CH516 Chrome plated D.P.B.W. butts screws
CH517 Light butts
CH518 Strong butts
CH519 Rising butt hinge
Fire
Re
sita
nt
Gua
rant
ee
BrassPins
FinishesFeatures/ FunctionsStandards
Security Features
8
8
8
❒
❒
❒
❒
●
❒
1
1
1
1
1
1
1
1
1
1
2
2
3
2
3
3
2
1
1
1
●
●
●
●
●
●
●
●
●
●
StainlessPins
●
●
●
●
●
SteelPins
●
●
●
●
●
Handed
●
C.W.Screws
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Hinges
H i n g e s
BS7352
H5
Key: Fire Resistant - ❒ = Depending on specific variant.
D.S.W. = Double Steel Washered
D.S.S.W. = Double Stainless Steel Washered
D.P.B.W. = Double Phosphor Bronze Washered
H.D. = Heavy Duty
RALColours
SelfColour
PolishedBrass
ZincPlate
ElectroBrass
StainlessSteel
PolishedStainless
Steel
ChromePlated
Aluminium
H6
H i n g e s
Hinges CH500 CH501 CH502 CH503 CH504 CH505
Security Features
1 year
●
● ●
● ●
●
●
● ●
●
● ● ●
1 year 1 year 1 year 1 year 1 yearGuarantee
FireResitant
Features
Brass Pins
Steel Pins
Stainless pins
c/w Screws
Handed
Finishes
RAL Coloured
Self Colour
Polished Brass
Zinc Plate
Electro Brass
Stainless Steel
Polished Stainless Steel
Chrome
Aluminium
Classification
StandardsCH500 - Self Colour Solid Drawn Brass Butt CH503 - Solid Drawn P.B. Counter Flap Hinge
Line No. A BCH500/1 1” 3/4”CH500/2 13/4” 7/8”CH500/3 2” 11/8”CH500/4 21/2” 13/8”CH500/5 3” 15/8”CH500/6 4” 23/8”CH500/7 4” 25/8”CH500/8 4” 3”CH500/9 5” 3”
CH500/10 6” 3”
Line No. A BCH503 11/4” 4”
Line No. ACH504 21/2”
Line No. A BCH501/1 3” 15/8”CH501/2 4” 25/8”.
Line No. A BCH502/1 1” 3/4”CH502/2 11/2” 7/8”CH502/3 2” 11/8”CH502/4 21/2” 13/8”CH502/5 3” 15/8”CH502/6 3” 2”CH502/7 4” 25/8”
Line No. A B CCH505/1 4” 2” 3mmCH505/2 4” 3” 5mmCH505/3 4” 4” 6mm
CH501 - Self Colour H.D. Solid Drawn Brass Butts CH504 - S.C. Solid Drawn Brass Stormproof Butt
CH502 - Solid Drawn Pol. Brass Butts c/w Screws CH505 - Solid Drawn Pol. Brass Parliament Hinge
B
A
B
A
B
AA
B
A
B
C
A
H7
H i n g e s
Hinges CH506 CH507 CH508 CH509 CH510 CH511
Security Features
1 year 1 year 1 year 1 year
❒
2 years
❒
2 years
●
●
● ●
●
● ●
●
●
●
●
●
●
8
Fire Resistant
Guarantee
Features
Brass Pins
Steel Pins
Stainless pins
c/w Screws
Handed
Finishes
RAL Coloured
Self Colour
Polished Brass
Zinc Plate
Electro Brass
Stainless Steel
Polished Stainless Steel
Chrome
Aluminium
Classification
StandardsCH506 - Self Colour D.S.W. Brass Butts CH509 - D.S.S.W. Aluminium Butts c/w Screws
Line No. A BCH506/1 3” 2”CH506/2 4” 25/8”CH506/3 4” 3”CH506/4 5” 3”
Line No. A BCH507/1 3” 2”CH507/2 4” 25/8”CH507/3 4” 3”CH507/4 5” 3”
Line No. A BCH508/1 3” 2”CH508/2 4” 25/8”CH508/3 4” 3”CH508/4 4” 4”CH508/5 6” 4”
Line No. A B CCH511/1 3” 2” 3mmCH511/2 4” 25/8” 3.5mmCH511/3 4” 3” 4mm
Line No. A B CCH509/1 3” 2” 3mmCH509/2 4” 25/8” 3mm
Line No. A B CCH510/1 3” 2” 3mmCH510/2 4” 25/8” 3mmCH510/3 4” 3” 4mm
CH507 - Polished Brass D.S.W. Butts
B
A
B
C
C
C
A
B
A
B
A
B
A
B
A
CH510/3: Fire Tested
CH511/3: Fire Tested
CH510 - D.S.S.W. Polished Brass Butts
CH508 - D.P.B.W. Polished Brass Butts CH511 - D.P.B.W. Polished Brass Butts
H8
H i n g e s
Hinges CH512 CH513 CH514 CH515 CH516 CH517
Security Features
❒
3 years
●
●
●
● ● ●
●
●
●
●
●
●
●
●
●
●
●
●
●
❒
2 years
●
3 years
❒
3 years 2 years 1 year
8 8
Fire Resistant
Guarantee
Features
Brass Pins
Steel Pins
Stainless pins
c/w Screws
Handed
Finishes
RAL Coloured
Self Colour
Polished Brass
Zinc Plate
Electro Brass
Stainless Steel
Polished Stainless Steel
Chrome
Aluminium
Classification
StandardsCH512 - 4 Ball Bearing Brass Butts c/w Screws CH515 - S. Steel 2 Ball Bearing Butt c/w Screws
CH513 - S. Steel Plain Butts c/w Screws CH516 - Chrome Plated D.P.B.W. Butts c/w Screws
CH514 - S. Steel Washered Butts c/w Screws CH517 - Light Butts Z.P. - E.B. or Colour Coated
Line No. A B CCH512/1 4” 3” 3mmCH512/2 4” 4” 3mm
Line No. A B CCH515/1 4” 3” 2.5mmCH515/2 4” 3” 3mm
Line No. A B CCH516/1 3” 2” 3mmCH516/2 4” 25/8” 3mm
Line No. A B CCH513/1 3” 2” 1.5mmCH513/2 4” 3” 2mm
Line No. A B CCH514 4” 3” 2mm
Line No. A BCH517/1 3” 2”CH517/2 4” 25/8”.
B
C
C C
C
A
B
A
B
A
B
C
A
B
A
B
A
CH512/1: Fire Tested CH515/1: Fire Tested
CH513/2: Fire Tested
CH514: Fire Tested
H9
H i n g e s
Hinges CH518 CH519
Security Features
1 year
●
●
●
●
●
●
●
●
1 year
FireResistant
Guarantee
Features
Brass Pins
Steel Pins
Stainless pins
c/w Screws
Handed
Finishes
RAL Coloured
Self Colour
Polished Brass
Zinc Plate
Electro Brass
Stainless Steel
Polished Stainless Steel
Chrome
Aluminium
Classification
StandardsCH518 - Strong Butts Z.P. E.B. or Colour Coating CH519 - Rising Butt Hinge Z.P. and E.B.
Line No. A BCH518/1 3” 2”CH518/2 4” 25/8”.
Line No. A BCH519/1 3” 23/4”CH519/2 4” 23/4”.
B
A
B
A
CH500
CH501
CH502
CH503
CH504
CH505
CH500/1CH500/2CH500/3CH500/4CH500/5CH500/6CH500/7CH500/8CH500/9CH500/10
CH501/1CH501/2
CH502/1CH502/2CH502/3CH502/4CH502/5CH502/6CH502/7
CH503
CH504
CH505/1CH505/2CH505/3
25.4 x 19.0538.1 x 22.2250.8 x 28.5763.5 x 34.9276.2 x 41.27101.6 x 60.32101.6 x 66.67101.6 x 76.2127 x 76.2152.4 x 76.2
76.2 x 41.27101.6 x 66.67
25.4 x 19.0538.1 x 22.2250.8 x 28.5763.5 x 34.9276.2 x 41.2776.2 x 50.8101.6 x 66.67
31.75 x 101.6
63.5
101.6 x 50.8 x 4101.6 x 76.2 x 5101.6 101.6 x 6
MM
CH506
CH507
CH508
CH509
CH510
CH511
CH512
CH513
CH514
CH515
CH516
CH517
CH518
CH519
CH506/1CH506/2CH506/3CH506/4
CH507/1CH507/2CH507/3CH507/4
CH508/1CH508/2CH508/3CH508/4CH508/5
CH509/1CH509/2
CH510/1CH510/2CH510/3
CH511/1CH511/2CH511/3
CH512/1CH512/2
CH513/1CH513/2
CH514
CH515/1CH515/2
CH516/1CH516/2
CH517/1CH517/2
CH518/1CH518/2
CH519/1CH519/2
76.2 x 50.8101.6 x 66.67101.6 x 76.2127 x 76.2
76.2 x 50.8101.6 x 66.67101.6 x 76.2127 x 76.2
76.2 x 50.8101.6 x 66.67101.6 x 76.2101.6 x 101.6152.4 x 101.6
76.2 x50.8 x 3101.6 x 66.67 x 3
76.2 x 50.8 x 3101.6 x 66.67 x 3101.6 x 76.2 x 4
76.2 x 50.8 x 3101.6 x 66.67 x 3.5101.6 x 76.2 x 4
101.6 x 76.2 x 3101.6 x 101.6 x 3
76.2 x 50.8 x 1.5101.6 x 76.2 x 2
101.6 x 76.2 x 2
101.6 x 76.2 x 2.5101.6 x 76.2 x 3
76.2 x 50.8 x 3101.6 x 66.67 x 3
76.2 x 50.8101.6 x 66.67
76.2 x 50.8101.6 x 66.67
76.2 x 69.85101.6 x 69.85
MM MM
Details of metric sizes
Welcome to the Chubb CD catalogue - We hope you will find it useful.If you have not already done so, please take a minute to fill in, print and send this reply-paid form which will ensurethat you are kept up to date with future issues.
We look forward to hearing from you
Yours faithfully
Iain MacKenzieMarketing Manager
Yale Security Products UK Limited, Wood Street, Willenhall, West Midlands, England, WV13 1LATel: +44 (0) 1902 366 911 Fax: +44 (0) 1902 368 535, www.chubblocks.co.uk email: [email protected]
fold first ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If you do not return the reply form you will not receive updates or replacements in the future.
Click on a dotted lined field below, type in the information and when complete press the Print button. Select'Current Page' in the Print dialogue box before pressing 'OK'. Fold on the lines shown, staple the bottom and post.
Your details:
Title ................ Initial ............ Surname ............................................................
Company ............................................................................................................
Position ................................................................................................................
Address ................................................................................................................
.............................................................. Town ....................................................
County ................................................ Post Code ............................................
Tel: ...................................................... Fax: ........................................................
Email: ..................................................................................................................
Chubb ® is a registered Trademark. © 2000 Yale Security Products UK Ltd. All rights reserved.
fold second ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Marketing DepartmentYale Security Products UK LimitedPO BOX 196WILLENHALLWest MidlandsWV13 1BRBUSINESS REPLY SERVICELicence No. WV 500
BUSINESS REPLY SERVICELicence No. WV 500
Staple here -------
Wood Street, Willenhall, West Midlands, United Kingdom, WV13 1LATel: +44 (0) 1902 366 911 Fax: +44 (0) 1902 368 535www.chubblocks.co.uk
C/H/00/01-1