CHUBB PRODUCT CATALOGUE v2 - Amazon S3€¦ · Chubb have trained technical staff who offer a free...

Int

ro

du

ct

ion

I n t r o d u c t i o n

• C y l i n d e r s

• M o r t i c e L o c k s

• R i m L o c k s

• P a d l o c k s

• S e c o n d a r y S e c u r i t y

• A c c e s s C o n t r o l

• F u r n i t u r e

• D o o r C l o s e r s

• E s c a p e H a r d w a r e

• H i n g e s


Catalogue Index

Cyl inders

P r o d u c t C a t a l o g u e

Padlocks Furniture & F itt ings Hinges

Mort ice Locks Secondary Security Door Closers Index by Part No

Rim Locks Access Control Escape Hardware Contact ing us

The Chubb name has been synonymous withexcellence in security systems for over onehundred and seventy five years.

The consistently high standards ofengineering of its locks had already madeChubb a household name by the beginning ofthe twentieth century.

Today, we may be in a new century but Chubbis still the premier name in security nowoffering high security products for both thehome and commercial use. As part of ourongoing policy of only offering products thatmeet the highest levels of quality Chubb isaccredited with and meets the requirementsof BS EN ISO 9001: 1994.

We have made every effort to ensure that attime of going to print all information shownin this catalogue is correct. However, in ourefforts to continually improve ourproducts and offer only the highestlevels of security and quality we reservethe right to make alterations to theproduct specifications shown in thiscatalogue.


The National House Building Council offersgeneral guidance on security for dwellings,flats and maisonettes.

Products endorsed with the UL mark havepassed strict testing procedures under thecontrol of the Underwriters LaboratoriesIncorporated.

The Association of British Insurers providesminimum security recommendations forexternal doors and windows.

The application of the CE mark is currentlyrestricted to products covered by the lowvoltage and EMC Directives.

The ANSI reference can be claimed when aproduct conforms to the relevant AmericanStandards Institute Specification.

The Loss Prevention Certification Boardprovides approval and certificationmarking on a range of security fittings.

The Master Locksmiths Association providesguidelines covering minimum securitylevels for domestic properties.

Products that meet MOBH3PS have beentested to the performance specificationsissued by the Property Services Agency.

Standards & Approvals

Chubb recognises that in addition to it’s own high quality standardsthe approval of it’s products by independent organisations is neededto meet the requirements of many regulations in today’s market.

In order to help simplify all of these standards we have provided ineach section of the catalogue a reference page showing each of thestandards. Additionally we have where applicable noted against eachproduct which standards apply to that product.

Shown below are the independent standards organisation with a briefdescription to the meaning and reference of each.

These pan-European standards classifyproducts into grades based on a seriesof exacting tests.

Products endorsed with the Kitemarkhave passed a strict testing procedureunder the control of the BritishStandards Institution.

A BS reference can be claimed when aproduct conforms to the relevantBritish Standard.

Chubb is accredited with andmeets the requirements of BS EN ISO 9001: 1994.


Security Features

Chubb have developed a series of icons to enable theprocess of product specification to be simplified. Webelieve that these icons represent the most importantfeatures when looking to specify architectural hardwareor security products.

Throughout this whole catalogue constant referencewill be made to each of these icons. Each icon representsa feature that, irrespective of what type of product itrelates to, can be used to identify any relevant securityfeatures.

Chubb, simplifying the specification process

1

2

3

4

Drill ResistantHardened protection against drillattack.

5

6

8

9

10

11

12

Torque ResistantBuilt in strength against torqueattack.

Saw ResistantHardened protection against sawattack.

Force ResistantBuilt in strength against force attack.

Pick ResistantBuilt in protection to resist picking.

Corrosion ResistantProducts conform to appropriateanti-corrosion requirements.

Tamper ResistantBuilt in protection against tampering.

Fire ResistantProducts conform to appropriate firetest requirements.

EscapeProducts for use on an escape door.

Key ControlThe products can be included in akey control system.

GuaranteeProducts are guaranteed for a periodof time. (Unless specified otherwisethis will be one year)

Protected SectionProducts are available as an optionon a patented key section.

7

I n t r o d u c t i o nP r o d u c t C a t a l o g u e

This catalogue is divided into sections by product range.Each section has been developed so that it can be usedin isolation and will provide all the informationrequired to assist when specifying from the Chubbrange.

Each product range brochure has three areas ofinformation:

Product Range Introduction

Product Range Overview

Product Specifications

How to Use the Catalogue


1

1

2

3

The product range introductionfirstly shows the standards andsecurity icons reference pagetogether with a page detailingfeatures and functions to be foundwithin the range

This page also providesexplanations of terminologyand shows product optionssuch as finishes and lockingmechanisms.

Chubb have developed a series oficons to enable the process ofspecification to be simplified.Throughout the whole catalogueconstant reference will be madeto these icons.

This page details how each of therelevant icons are applicable tothe product range shown withineach section.

In each product rangeintroduction we have includedinformation which helps toexplain the features, functionsand applications of the productswithin the section.

The index is included toguide you through eachsection.

Product Range Introduction




2The second area of information to befound within each product rangebrochure is the range overview. Thedouble page spread acts both as acontents page for the brochure but alsoprovides product information via thespecification table which also provides aproduct range comparison.

The product specification pages containall the relevant information to assistwhen specifying from the Chubb range.

This page of the catalogue showsa photo gallery of the productrange, which can be cross-referenced, to the specificationtable shown on the page below.

The left hand side of thespecification table provides all theessential information relating tohow the icons apply to eachindividual product.

The right hand side of thespecification table provides allthe essential informationrelating to the features,functions and finishes availablein each individual product.

Product Range Overview




3The greater part of eachcatalogue section is devotedto providing more detailedinformation about eachindividual product. Eachproduct is represented bothwith a photograph anddimensional drawing togetherwith some key features andspecification table.

A diagram of each product is shownproviding all essential dimensional detail.

The upper section of thespecification table providesinformation relating to the seriesof security icons.

The lower section of thespecification table providesinformation relating to productfeatures and functions togetherwith finish options.

Each product is representedby a colour photograph.

Product Specifications


Hinged doors can open in one of four ways and this will determine whether the door isleft or right hand. Double doors with plain meeting stiles are also handed in this manner.

Likewise double rebated doors can open in one of four ways and this will determinewhether the door is left or right hand.

Handing of Doors


Single Doors Inward Opening

UK Left Hand UK Right Hand


Single Doors Outward Opening

Double Rebated Doors Inward Opening



Double Rebated Doors Outward Opening

Outside Outside Outside Outside

Outside Outside Outside Outside


Key Control Systems


There are various types of key control systems from simple key alike systems tocomplicated grand master key suites.

3 different locks all keyed alike

3 different locks each withtheir individual key

Example

Lock 2

Keyed Alike

This refers to a number of lockseach operated by the same key.This is also referred to as alikechange, locks to pass or keyed topass;

Example

Master Keyed

This is the simplest form of master keying. Each individuallock is operated by its own unique key and in addition acontrol key, (master key) operates all the locks in the suite.

Grand Master Keyed

It is most important that the keying requirements of a building are accuratelyand correctly detailed to provide security and accessibility for the keyholders ofthe building. Any recommendations must relate the security of the system to theconvenience of movement within the building.

Too much reliance on one side of the security, convenience balance will eithersacrifice the security offered or lose the convenience factor. It is thus vitallyimportant to strike the right balance.

Secure our helpChubb have trained technical staff who offer a free service to help with the planning of masterkey suites.

SECURITY CONVENIENCE

A Grand master key is a control key which operates a particular number of locks which are grouped into 2 or more setsof suites (known as sub-suites)

In this example Sub-suites A and B are in fact master-suites that are linked to a higher authority, the Grand Master Key

The individual keys which will operate the individual locks are known as change keys/servant keys or differ keys andwill only operate their particular lock.

Chubb cylinders can be master keyed to give maximum flexibility of design and ensure that the balance between security and convenience can be maintained.

Sub-Master Key A Sub-Master Key B

Lock 1 Lock 4 Lock 5 Lock 6Lock 1 Lock 2 Lock 3

Lock 1 Lock 3

Lock 3Lock 2

Master Key

Example

Grand Master Key


i n t r o d u c t i o n

Throughout the catalogue you will see a column headed

The information shown under this heading can help you identify whichproducts can be Keyed Alike or Masterkeyed. The products that can bekeyed to work with other products are given a group code. It works inthe following way:

KA - means the product can be Keyed Alike with more of the sameproduct.

MK - means the product can be Masterkeyed with more of the sameproduct.

A GROUP LETTER (eg A) - means the product can be Keyed Alike orMasterkeyed with more of the same product AND with other productslisted in the same group.

eg, a window lock in group E could be made to work from the same keyas a security door fitting in group E.

The table shows an overview of the product keying groups;

Group Products

Key Control Systems

Key Control A Cylinders (TX mechanism)

B Window Locks (large hex key mechanism)

C Window Locks (lever key mechanism)

D Window Locks (tubular key mechanism)

E Window Locks and Security Door Fittings (spline key mechanism)

F Window Locks and Security Door Fittings (pin tumbler mechanism)

G Mortice Locks (Detainer mechanism)

H Padlocks (Ava mechanism)

Keying Groups


C y l i n d e r s

Cy

lin

de

rs

• T X

• 6 P i n

• S e c u r i t y R o s e s

Note: We have made every effort to ensure that atthe time of going to print all information shown inthis catalogue is correct. However, in our efforts tocontinually improve our products and offer only thehighest levels of security and quality we reserve theright to make alterations to the productspecifications shown in this catalogue. Alldimensions provided within this catalogue areapproximate and for guidance only.

1

2

3

4

Drill ResistantHardened protection against drill attack.

5

6

8

9

10

11

12

Torque ResistantBuilt in strength against torque attack.

Saw ResistantHardened protection against saw attack.



Corrosion ResistantProducts conform to appropriate anti-corrosion requirements.

Tamper ResistantBuilt in protection against Tampering.

Fire ResistantProducts conform to appropriate fire testrequirements.


Key ControlThe products can be included in a keycontrol system.

GuaranteeProducts are guaranteed for a period oftime.

Protected SectionProducts are available as an option on apatented key section.

7

Security FeaturesIntroduct ion How to Specify

Keying Groups


Cyl inders Index

• Introduction

• BSEN103 Classification

• Features and Functions

• Photo Gallery

• Range Table

• Euro Profile Cylinders

Single Cylinders

Double Cylinders

Turn & Key Cylinders

• Oval Profile Cylinders

Single Cylinders

Double Cylinders

Turn & Key Cylinders

• Rim Cylinders

• Mortice Screw in Cylinders

• Scandanavian Cylinders

Inner Cylinder

Outer Cylinder

• Security Escutcheons

C2

C3

C3

C4

C5

C6

C7

C8

C8

C9

C9

Chubb offers a very comprehensive range ofcylinders to suit most applications. They areavailable in the most common styles to enable thecustomer to utilise their existing ironmongery.The patent protection on the new TX system willhelp secure your system from illicit key duplication,and is available with the new Fast Response CentreService Support.For the most comprehensive and flexible range ofcylinders, Chubb has the solution.

Throughout the catalogue you will see a columnheaded.

The information shown under this heading canhelp you identify which products can be KeyedAlike or Masterkeyed.The products that can be keyed to work with otherproducts are given a group code.KA - means the product can be Keyed Alike withmore of the same product.MK - means the product can be Masterkeyed withmore of the same product.A Group Letter (eg A) means the product can beKeyed Alike or Masterkeyed with more of the sameproduct and with other products listed in the samegroup.For the complete range of products and theirkeying groups, see the chart in the introductionsection.

2 keys are supplied as standard, however see theprice list for any variations.

Chubb is accredited with and meets therequirements of BS EN ISO 9001: 1994.

Chubb have developed a series of icons to enablethe process of product specification to besimplified.

From today you can specifically detail yourrequirements for a product, therefore ensuring thatit includes particular security features.

Example: If you require a cylinder that is DrillResistant look for the Drill icon (2) in the rangetable.

Chubb, Simplifying the Specification Process.

Key Control

The Association of British Insurersprovides minimum securityrecommendations for external doors andwindows.

C y l i n d e r s

These pan-European standards classifyproducts into grades on a series ofexacting tests.

Keys

C2

C y l i n d e r s

Finishes:

BSEN1303 Class i f icat ion

▼

Features and Funct ions

Brass Satin Nickel

Ideal for Use with: Rim Locks, Mortice Locks, Access Control, Panic Hardware, Multipoint Locks.

Reversible key

The TX key can beinserted into thecylinder either way upand still operate.

TXNewly patented HighSecurity lockingsystem. The systemoperates on 3 rowsof pins totalling 10pins in all. The 2sensor pins in thecylinder interact withsensor pins in thekey. The key is a flatdimple type key.

6 PINConvenient systemfor generalapplications.System operates ona row of six lateralpins.

Key Systems

This standard classifies cylinders using a 7 digit coding system.Each digit refers to a particular feature of the product measured against the standard’sperformance requirements.

Digit 1 - Category of use - grade 1: Suitable for use at extremes of temperature- 20˚C to +80˚C.

Digit 2 - Durability - grade 4: 25 000 cycles completed.- grade 5: 50 000 cycles completed.- grade 6: 100 000 cycles completed.

Digit 3 - Door mass No requirement.

Digit 4 - Fire resistance - grade 0: No requirement.- grade 1: Cylinders shall be fire tested in accordance

with current fire test requirements of prEN 1634-1.

Digit 5 - Safety No requirement.

Digit 6 - Corrosion resistance - grade 0: No requirement.- grade 1: Conforms to grade 3 of BS EN 1670

as a minimum.

Digit 7 - Security Cylinders will be classified in grades 1 to 5, where 5 is the highest. The grade of security can differ from one side of a double cylinder to the other.

Grades1 2 3 4 5

Min. no. of effective differs 100 300 15 000 30 000 100 000Min. no. of movable pins 2 3 5 6 6Direct coding on key YES YES NO NO NOMax. net drill time (mins.) - - - 3 5Total drill test time (mins) - - - 5 10Chisel attack resistance (No. of blows) - - - 30 40Cylinder extraction resistance - - - 15kN 15kNCylinder torque resistance (Nm) 2.5 5 15 20 30

ExampleThe following marking denotes a cylinder meeting the required category of use, durability grade 6 (100 000 cycles) with no fire resistance requirement, grade 1 corrosion resistance and grade 4 security.

Note: To gain chisel or torque resitance it is important that either, (1) the correct length of cylinder is used to be flush with the door/handle face OR (2) a high security rose is used to cover any cylinder protrusion.

1 6 - 0 - 1 4

Security Rose

Force ResistantSecurity roses or correct lengthcylinders prevent force attacks.

Protected SectionAvailable on a patented keysection.

Torque ResistantSide lugs, security roses or correctlength cylinders prevent twisting.

Pick ResistantMushroom pins in the cylinderinhibiting picking.

Drill ResistantHardened Steel Inserts in thecylinder body and plug.

Corrosion Resistant Products have successfullycompleted an anti-corrosion test.

GuaranteeGuarantee period applicablewhen used with original Chubbkeys and maintenanceinstructions followed.

Key ControlCylinders using the same keysystems can be supplied Keyed Alike, or Masterkeyed.

*

*

*1 2

Products have beentested to EN1303and graded.

Products meet theminimum ABI securityrecommendations.

Number of Keys2 keys are supplied asstandard, however seethe price list for anyvariations.

C3

C y l i n d e r s

Euro Prof i le Cyl inders

Scandinavian Oval Cyl inders

Oval Prof i le Cyl inders

Rim Cyl inders

Rim Cyl inders

Screw In Cyl inders

TXES Page

C6

TXOS Page

C7

TXED Page

C6 TXET Page

C6 TXR Page

C8

4LC Page

C8

TXTC Page

C8

Security Roses

3C14E & 3CE Page

C9 3C13CE Page

C9

TXOD Page

C7

TXSCI Page

C9 TXSCO Page

C9

TXOT Page

C7

C4

TX 6 Pin

Key Systems

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Std. Cam ReversiblePosition Key

Features & FunctionsStandards Finish Options

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● KA 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● ● ● ● ● ● A 10

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

1 6 - 0 - 1 3

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

● 1 6 - 0 - 1 5

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

25° ●

●

●

●

●

●

●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

●

● ●

● ●

● ●

● ●

● ●

BrassSatinNickel

Oval Prof i le Cyl inders

Rim Cyl inders

Mort ice Screw-in Cyl inders

Scandinavian Oval Cyl inders

C y l i n d e r s

Euro Prof i le Cyl inders

TXES3010 Euro Profile Single CylinderTXES3510 Euro Profile Single CylinderTXES4010 Euro Profile Single CylinderTXES4510 Euro Profile Single CylinderTXED3030 Euro Profile Double CylinderTXED3535 Euro Profile Double CylinderTXED4040 Euro Profile Double CylinderTXED4545 Euro Profile Double CylinderTXET3030 Euro Profile Turn & Key CylinderTXET3535 Euro Profile Turn & Key CylinderTXET4040 Euro Profile Turn & Key CylinderTXET4545 Euro Profile Turn & Key Cylinder

TXOS3010 Oval Profile Single CylinderTXOS3510 Oval Profile Single CylinderTXOS4010 Oval Profile Single CylinderTXOS4510 Oval Profile Single CylinderTXOD3030 Oval Profile Double CylinderTXOD3535 Oval Profile Double CylinderTXOD4040 Oval Profile Double CylinderTXOD4545 Oval Profile Double CylinderTXOT3030 Oval Profile Turn & Key CylinderTXOT3535 Oval Profile Turn & Key CylinderTXOT4040 Oval Profile Turn & Key CylinderTXOT4545 Oval Profile Turn & Key Cylinder

TXR Rim Cylinder4LC Rim Cylinder

TXTC Screw In Cylinder

TXSCI25 Scandanavian Oval Cylinder InnerTXSCO25 Scandanavian Oval Cylinder OuterTXSCI30 Scandanavian Oval Cylinder InnerTXSCO30 Scandanavian Oval Cylinder Outer

Security Features

Prot

ecte

d Se

ctio

n

Prot

ecte

d

Sect

ion

Dri

ll Re

sist

ant

Forc

e Re

sist

ant

Pick

Re

sist

ant

Torq

ue

Resi

stan

t

Key

Cont

rol

Corr

osio

n

Resi

stan

t

Gua

rant

ee

C5

C y l i n d e r s

• For use with Euro profile lock cases.• Gives key access from one side of a door.

Euro Prof i le S ingle Cyl indersTXES

LIST LENGTH LENGTH LENGTHNo. A B C

TXES3010 30 10 40TXES3510 35 10 45TXES4010 40 10 50TXES4510 45 10 55

TXES TXED TXET

Security Features

Standards

●

●

●

●

●

●

A

10

●

●

●

●

●

●

A

10

●

●

●

●

●

●

A

10

Brass ● ● ●

Satin Nickel ● ● ●

Std. Cam Position 25˚ 25˚ 25˚

Reversible Key ● ● ●

Finish Options

Features & Functions

● ● ●

TX ● ● ●

6 Pin

Key Systems

• For use with Euro profile lock cases.• Gives key access from both sides of a door.

Euro Prof i le Double Cyl indersTXED


TXED3030 30 30 60TXED3535 35 35 70TXED4040 40 40 80TXED4545 45 45 90

• For use with Euro profile lock cases.• Gives key access from one side of a door and thumbturn operation from the other.• Turn suitable for people with Impaired Mobility.

Euro Prof i le Key & Turn Cyl indersTXET


TXET3030 30 30 60TXET3535 35 35 70TXET4040 40 40 80TXET4545 45 45 90

ForceResistant

PickResistant

TorqueResistant

CorrosionResistant

Key Control

Guarantee

ProtectedSection

DrillResistant

A 17

17

33

33

17

33

B

C

BA

C

BA

C

1 6 - 0 - 1 5 1 6 - 0 - 1 5 1 6 - 0 - 1 5

C6

Chris Grant

C y l i n d e r s

• For use with Oval profile lock cases.• Gives key access from one side of a door.

Oval Prof i le S ingle Cyl indersTXOS


TXOS3010 30 10 40TXOS3510 35 10 45TXOS4010 40 10 50TXOS4510 45 10 55

• For use with Oval profile lock cases.• Gives key access from both sides of a door.

Oval Prof i le Double Cyl indersTXOD


TXOD3030 30 30 60TXOD3535 35 35 70TXOD4040 40 40 80TXOD4545 45 45 90

• For use with Oval profile lock cases.• Gives key access from one side of a door and thumbturn operation from the other.• Turn suitable for people with Impaired Mobility.

Oval Prof i le Key & Turn Cyl indersTXOT


TXOT3030 30 30 60TXOT3535 35 35 70TXOT4040 40 40 80TXOT4545 45 45 90

B A

C

A B

C

A B

C

17.6

31.6

17.6

31.6

17.6

31.6

TXOS TXOD TXOT

Security Features

Standards

●

●

●

●

●

●

A

10

●

●

●

●

●

●

A

10

●

●

●

●

●

●

A

10

Brass ● ● ●

Satin Nickel ● ● ●

Std. Cam Position 25˚ 25˚ 25˚

Reversible Key ● ● ●

Finish Options


● ● ●

TX ● ● ●

6 Pin

Key Systems

ForceResistant

PickResistant

TorqueResistant

CorrosionResistant

Key Control

Guarantee

ProtectedSection

DrillResistant

1 6 - 0 - 1 5 1 6 - 0 - 1 5 1 6 - 0 - 1 5

C7

C y l i n d e r s

• For use with surface mounted locks operating from a tailbar.• Provide key access from one side of a door.• Suitable for doors from 38mm to 57mm in thickness.

R im Cyl indersTXR

• For use with surface mounted locks operating from a tailbar.• Provide key access from one side of a door.• Suitable for doors from 38mm to 57mm in thickness.

R im Cyl inders4LC

Mortice Screw in Cyl indersTXTC

46mm Ø

32mm47.5mm

32mm

32mm Ø29mm Ø Barrel

• For use with American stile or narrow stile mortice locksoperating from a 29mm threaded cylinder.

• Provide key access from one side of a door.

32mm71mm

TXR 4LC TXTC

Security Features

Standards

●

●

●

●

●

●

A

10

●

●

●

KA

10

●

●

●

●

●

●

A

10

Brass ● ● ●

Satin Nickel ● ●

Std. Cam Position

Reversible Key ● ●

Finish Options


● ● ●

TX ● ●

6 Pin ●

Key Systems

ForceResistant

PickResistant

TorqueResistant

CorrosionResistant

Key Control

Guarantee

ProtectedSection

DrillResistant

1 6 - 0 - 1 5 1 6 - 0 - 1 3 1 6 - 0 - 1 5

C8

32mm Ø

C y l i n d e r s

• For use with Scandinavian oval profile lock cases.• Provides key access from the inside of a door.• Bolt through fixings.

Scandinavian Oval Cyl indersTXSCI

LIST LENGTHNo. A

TXSCI25 25TXSCI30 30

LIST LENGTHNo. A

TXSC025 25TXSC030 30

• For use with Scandinavian oval profile lock cases.• Provides key access from the outside of the door.• Bolt through fixings.

Scandinavian Oval Cyl indersTXSCO

High Security Cyl inder Escutcheons3C14E • 3CE

3C14E 3CE

3C13CE

A

A

20

35

20

35

• For use with Euro profile cylinders.• Helps prevent against Torque and Force attacks.• Brass or Satin Finish.• Bolt through fixing.

3C14E

3CE

38mm

38mm

54mm

51mm

13mm

62.5mm

46mm

13.5mm

10mm

• For use with Euro profile cylinders.• Helps prevent against Torque and Force attacks.• Brass or Satin Finish.• Bolt through fixing.• Escutcheon covers cylinder for extra protection.

7mm

TXSCI TXSCO

Security Features

Standards

●

●

●

●

●

●

A

10

●

●

●

●

●

●

A

10

Brass ● ●

Satin Nickel ● ●

Std. Cam Position

Reversible Key ● ●

Finish Options


● ●

TX ● ●

6 Pin

Key Systems

ForceResistant

PickResistant

TorqueResistant

CorrosionResistant

Key Control

Guarantee

ProtectedSection

DrillResistant

1 6 - 0 - 1 5 1 6 - 0 - 1 5

C9

C y l i n d e r s

Notes

C10

M o r t i c e L o c k s

Mo

rt

ice

Lo

ck

s

• L e v e r M o r t i c e

• C y l i n d e r M o r t i c e

• A r c h i t e c t u r a l M o r t i c e

• R e b a t e S e t s

• L a t c h e s

• K e y B l a n k s


1

2

3

4


5

6

8

9

10

11

12












7



Patented Key Systems

Mortice Locks Index

• Introduction


Lever Mortice Locks High Security Range

• Photo Gallery

• Range Table

• Range Details

• Rebate Sets

Lever Mortice Locks Security Range

• Photo Gallery

• Range Table

• Range Details

• Rebate Sets

Cylinder Mortice Locks

• Photo Gallery

• Range Table

• Range Details

• Rebate Sets

Architectural Mortice Locks

• Photo Gallery

• Range Table

• Range Details

Security Roses

Notes Page

M2

M3

M4

M5

M6 - 9

M9

M10

M11

M12 - 15

M15

M16

M16

M17 - 18

M18

M19

M19

M20 - 22

M23

M23

The Chubb name has been synonymous withmortice locks for over one hundred and seventy fiveyears.

Today Chubb offer a comprehensive range for botharchitectural specification and residential use.

These include lever, detainer and cylinder locks,some kitemarked to BS3621 for use on externaldoors as well as standard variants for internal andgeneral purpose doors.

Chubb is accredited with and meets therequirements of BS EN ISO 9001: 1994



Example: If you require a mortice lock that hashardened protection against drill attack, look forthe Drill Resistant icon (number 2) in the rangetable.


The National House Building Council offersgeneral guidance on security for dwellings,flats and maisonettes.

The Association of British Insurers providesminimum security recommendations forexternal doors and windows.

Products endorsed with the Kitemark havepassed a strict testing procedure under thecontrol of the British Standards Institution.

The Master Locksmiths Association providesguidelines covering minimum security levelsfor domestic properties.


Keying GroupsThroughout the catalogue you will see a columnheaded.

The information shown under this heading canhelp you identify which products can be KeyedAlike or Masterkeyed.The products that can be keyed to work with otherproducts are given a group code.KA - means the product can be Keyed Alike withmore of the same product.MK - means the product can be Masterkeyed withmore of the same product.A Group Letter (eg A) means the product can beKeyed Alike or Masterkeyed with more of the sameproduct and with other products listed in the samegroup.

For the complete range of products and theirkeying groups, see the chart in the introductionsection.

2 keys are supplied as standard, however see theprice list for any variations.

Key Control

Keys

Due to recent changes to UK copyright laws, the best wayto prevent illicit copying of keys is to use a patented system.

A selected number of Chubb Mortice Locks are available on a restricted key system. Additional keys are only available through authorised Chubb RKS centres.

Chubb TX: The Chubb cylinder mortice lock cases can beused with the Chubb TX patented cylinder system, (seeCylinder Catalogue).


Finishes:

the means by which the door is held closed

What Type of Door ?• A comprehensive range of locks for both exterior

and interior glass panelled or solid timber doors.

What i s Backset?

• This is the measurement fromthe edge of the door to thecentre of the keyhole.

• Locks with different backsetsare available depending uponapplication.

Locking the bolt so that it cannot be forced back.

Automatic (every time thedoor is closed it isdeadlocked)

BS3621 Thief Resistant Locks.Recommended by thePolice and the InsuranceCompanies

Key(external operation)

Thumbturn

Key(internal operation)

Latch

▼

*All locks are supplied complete with minimum of two keys as standard.


DeadlockingLatch

Deadbolt

Hookbolt

Brass Satin

Ideal for Use with: Cylinder Rimlocks & Access Control Systems

●L DB

HBDL/L

RollerboltR

What are Centres?

• This is the measurement fromthe centre of the ‘follower’,which operates the handles, tothe centre of the keyhole.

• In the UK this is commonly57mm, although other sizes areavailable.

Easy Reversible Latch

Deadlocking

Locking Mechanism =

The means by which the lock is operated

Lever or Detainer Cylinder

Operating Mechanism=

Edgeof door

Centres

Backset

Force ResistantBox Strike to protect thebolts.

Saw ResistantHardened steel bolt, plates orhardened rollers.


Pick ResistantLocking mechanism incorporatespick resistant device(s).

Drill ResistantSelected hardened or toughmaterials to resist drill attack.

Escape A single action withdraws all thebolts simultaneously

Key ControlProducts are Masterkeyble (MK)or able to be Keyed Alike (KA).

GuaranteeGuarantee period applicablewhen used with original ChubbKeys and maintenanceinstructions followed.

T G

Door Types

T Solid Timber

G Glass PanelledHandles

Security Rose

●

▲

Bolt Through Fixing

L e v e r M o r t i c e : H i g h S e c u r i t y R a n g e

Detainer

3G135Page

M6

3G114EPage

7 3K74EPage

7

7 Lever

3G117Page

M6 3G227Page

M6 3K77Page

M7 3K277Page

M73G110Page

M6

5 Lever

3G114Page

M8 3K74Page

M8 3U114Page

M8 3U74Page

M8 3G220Page

M9

5 Lever

3G114Page

M8 3K74Page

M8 3U114Page

M8 3U74Page

M8 3G220Page

M9

M4

Prot

ecte

d Se

ctio

n

Prot

ecte

d

Sect

ion

Dri

ll Re

sist

ant

Saw

Re

sist

ant

Forc

e Re

sist

ant

Pick

Re

sist

ant

Key

Cont

rol

Esca

pe

Gua

rant

ee

DB n/a Key Key

DB n/a Key Key

DB n/a Key Key

DB n/a Key Key

R/DB Roller Key Key

L/DB Roller Key Key

DB n/a Key Key

R/DB Roller Key Key

DB n/a Key Key

L/DB ● ● Key Key

DB n/a Key Key

Case Back CentresSize Set

73mm 44mm n/a

73mm 44mm n/a

67mm 40mm n/a

67mm 40mm n/a

67mm 40mm 57mm

67mm 40mm 57mm

67/80mm 40/53mm n/a

67/80mm 40/53mm 57mm

67/80mm 44/57mm n/a

67/80mm 44/57mm n/a

54mm 36mm n/a

●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

Door SpecificationSecurity Features

Security Features

Case Finishes

● ● ● ● ● 15

● ● ● ● ● G 15

● ● ● ● KA 15

● ● ● ● KA 15

● ● ● ● KA 15

● ● ● ● KA 15

O ● ● ● ● KA 15

O ● ● ● ● KA 15

● ● ● ● KA 15

● ● ● ● KA 15

● ● ● ● KA 15

SatinBrass Other

Security Detainer

Lever Mortice Locks

3G135

3G110

3G117

3G227

3K77

3K277

3G114

3K74

3U114

3U74

3G220

Security Detainer

7 Lever

Security 5 Lever

BS3621

BS3621

BS3621

BS3621

BS3621

BS3621

BS3621

BS3621

BS3621

BS3621

Key: Protected Section - O = Optional Locking Mechanism - R = Rollerbolt, DB = Deadbolt, L = Latch Bolt Through Fixings - ● = Handles MK = Masterkeyable KA = Keyed Alike Only G = Masterkey Grouping

Locking Bolt Easily DeadlockingMechanism Through Rev. Internal External

Fixings Latch

M5

Escape


• Kitemarked to BS3621. Recommended by insurance companies and the police.

• Key operation from both sides of the door. • Master keyable with other detainer locks. • Can be supplied with microswitches for alarm systems.• Available on patented Chubb RKS system.

Detainer

7 Lever3G117 Deadlock 3G227 Deadlock

73mm

122mm 178mm

29mm

178mm

25mm

14mm

14m

m

19m

m

• Key operation from both sides of the door. • 74,000 key variations. Extra keys only available

direct from Chubb.• Available on patented Chubb RKS system.


• Key operation from both sides of the door. • 7 lever mechanism generating in excess of 6000 key variations.

BS3621: 1980

�

BS3621: 1980

�

BS3621: 1980

�


• Key operation from both sides of the door. • 7 lever mechanism generating in excess of 6000 key variations.• Extra long deadbolt with 20mm throw.

44mm

73mm

122mm 178mm

29mm

178mm

25mm

14mm14

mm

19m

m

44mm

67mm

76mm178mm

29mm

25mm

14mm

14m

m

19m

m

40mm

133mm

67mm

76mm 200mm

29mm

25mm

20mm14

mm

19m

m

40mm

152mm

3G135 3G110 3G117 3G227

DB

Key

Key

73

44

n/a

●

DB

Key

Key

73

44

n/a

●

●

DB

Key

Key

67

40

n/a

●

●

DB

Key

Key

67

40

n/a

●

●

Security Features

●

●

●

●

G

15

O

●

●

●

●

G

15

●

●

●

●

KA

15

●

●

●

●

KA

15

SawResistant

ForceResistant

PickResistant

Escape

Key Control

Guarantee

ProtectedSection

DrillResistant

3G110 Deadlock3G135 Deadlock

Security Features

Locking Mechanism

Bolt Through Fixings

Deadlocking Internal

Deadlocking External

Door Specification

Case Size (mm)

Backset (mm)

Centres (mm)

Case Finishes

Brass

Satin

Other

M6

Escape


7 Lever

5 Lever


• Key and handle operation from both sides of the door. • 7 lever mechanism generating in excess of 6000

key variations.


• Key and handle operation from both sides of the door.• 7 lever mechanism generating in excess of 6000 key variations.• Extra long deadbolt with 20mm throw.• Bolt through fixings. • Easily reversible latchbolt.


• Key operation from both sides of the door. • Can be supplied to pass and are available with either

single or double pole microswitch.• Available on patented Chubb RKS System.• Extra long deadbolt with 20mm throw.


• Key and handle operation from both sides of the door. • Can be supplied to pass and are available with either

single or double pole microswitch.• Available on patented Chubb RKS System.• Extra long deadbolt with 20mm throw.

RKS

3K77 Sashlock

BS3621: 1980

�

BS3621: 1980

RKS

BS3621: 1980

BS3621: 1980

�

3K277 Sashlock

3G114E Deadlock N E W 3K74E Mortice Lock N E W

67mm

25mm

14mm

12m

m

18m

m

29mm

57mm

40mm

108mm

152mm

159mm

159mm67/80mm

25mm29mm

57mm

108mm

20mm

40/53mm

153mm 159mm

3K77 3K277

R/DB

Key

Key

67

40

57

●

●

L/DB

●

Key

Key

67/80

40

57

●

●

Security Features

●

●

●

●

KA

15

●

●

●

●

KA

15

SawResistant

ForceResistant

PickResistant

Escape

Key Control

Guarantee

ProtectedSection

DrillResistant

Security Features

Locking Mechanism




Door Specification

Case Size (mm)

Backset (mm)

Centres (mm)

Case Finishes

Brass

Satin

Other

M7


5 Lever


• Key operation from both sides of the door. • Can be supplied to pass and is available with

either single or double pole microswitch.• Available on patented Chubb RKS System.

5 Lever3U74 Sashlock


• Key and handle operation from both sides of the door. • Can be supplied to pass. Available with

either single or double pole microswitch.• Available on patented Chubb RKS System.

• Kitemarked to BS3621. Recommended by Insurance companies and the police.

• Key operation from both sides of the door. • Ideal as an upgrade lock as it will replace most

other lever mortice deadlocks with the minimum of carpentry.


• Key and handle operation from both sides of the door. • Ideal as an upgrade lock as it will replace most

other lever mortice sashlocks with the minimum of carpentry.

3G114 Deadlock

BS3621: 1980

BS3621: 1980 BS3621: 1980

BS3621: 1980

3K74 Sashlock

3U114 Deadlock

77mm

70mm 145mm

108mm

57mm

67/80mm

44/57mm

15mm

25mm

30mm

177mm 200mm

25mm

15mm

30mm

160mm

44/57mm

67/80mm

40/53mm

25mm

14mm

29mm

133mm 178mm

108mm

57mm

40/53mm

67/80mm

25mm

14mm

29mm

159mm153mm

67/80mm

3G114 3K74 3U114 3U74

DB

Key

Key

67/80

40/53

n/a

●

●

R/DB

Key

Key

67/80

40/53

57

●

●

DB

Key

Key

67/80

44/57

n/a

●

●

L/DB

●

Key

Key

67/80

44/57

57

●

●

Security Features

O

●

●

●

●

KA

15

O

●

●

●

●

KA

15

●

●

●

●

KA

15

●

●

●

●

KA

15

SawResistant

ForceResistant

PickResistant

Escape

Key Control

Guarantee

ProtectedSection

DrillResistant

Security Features

Locking Mechanism




Door Specification

Case Size (mm)

Backset (mm)

Centres (mm)

Case Finishes

Brass

Satin

Other


5 Lever


• Key operation from both sides of the door. • Narrow stile is particularly suited to doors

where the width is restricted, eg french doors.• Extra long deadbolt with 20mm throw.

28mm

Size

13mm

19mm

25mm

3G135

✔

✔

✔

Rebate Sets

• Different size rebate sets are available to suit the range of Chubb Lever Mortice Locks.• Available in either satin or brass finish.

3G110

✔

✔

✔

3G117

✔

✔

✔

3G227

✔

-

-

3K77

✔

✔

✔

3G114

✔

✔

✔

3K74

✔

✔

✔

3U114

✔

✔

✔

3U74

✔

✔

✔

3G220

✔

-

-

3G220 Deadlock

25mm

20mm

54mm

131mm 180mm 178mm

36mm

18m

m

BS3621: 1980

3G220

DB

Key

Key

54

36

n/a

●

●

Security Features

●

●

●

●

KA

15

SawResistant

ForceResistant

PickResistant

Escape

Key Control

Guarantee

ProtectedSection

DrillResistant

Security Features

Locking Mechanism




Door Specification

Case Size (mm)

Backset (mm)

Centres (mm)

Case Finishes

Brass

Satin

Other

• Only suitable for3G135 & 3G110.

• Only suitable for3G277.

• Only suitable for3U114.

3U277

-

-

-

• Only suitable for3U74

• Only suitable for3G220

• Details of Rebate sets for 3G117, 3K77, 3G114, & 3K74 are included on page M15.

3U277

L e v e r M o r t i c e : S e c u r i t y R a n g e

Detainer

3R35Page

M12 3R35X 3J60 3K70 3M50 3M51

5 Lever For Internal Doors N E W

3G115 3K75 3U115 3U75 3U177 3U677

M10

Page

M12Page

M12Page

M12Page

M13Page

M13

Page

M15Page

M14Page

M14Page

M14Page

M14Page

M13Page

M13

Prot

ecte

d Se

ctio

n

Prot

ecte

d

Sect

ion

Dri

ll Re

sist

ant

Saw

Re

sist

ant

Forc

e Re

sist

ant

Pick

Re

sist

ant

Key

Cont

rol

Esca

pe

Gua

rant

ee

Locking Bolt Easily Deadlocking 20mmMechanism Through Rev. Internal External Throw

Fixings Latch Deadbolt

D/L L Auto Auto

D/L L Auto Auto

L, DB Key Key

L, DB Key Key

Hookbolt Key Key

Hookbolt Key Key

DB n/a Key Key

R, DB Roller Key Key

DB n/a Key Key

L, DB ● Key Key

DB n/a Key Key

L, DB ● Key Key

L ●


80mm 50mm 56mm

80mm 50mm 56mm

165mm 83mm n/a

73mm 44mm 56mm

70mm 43mm n/a

70mm 43mm 56mm

67/80mm 40/53mm n/a

67/80mm 40/53mm 57mm

67/80mm 44/57mm n/a

67/80mm 44/57mm 57mm

65/77mm 44/57mm n/a

65/77mm 44/57mm 57mm

65/77mm 44/57mm n/a

● ●

● ●

●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●


Security Features

Case Finishes

O ● ● G 10

● ● ● G 10

O ● ● ● G 10

O ● ● ● G 10

O ● ● ● G 10

O ● ● ● G 10

● ● ● KA 10

● ● ● KA 10

● ● KA 10

● ● KA 10

● KA 10

● KA 10

10

SatinBrass Other

Detainer

Lever Mortice Locks

3R35

3R35X

3J60

3K70

3M50

3M51

3G115

3K75

3U115

3U75

3U177 NEW

3U277 NEW

3U677 NEW

Key: Protected Section - O = Optional Locking Mechanism - R = Rollerbolt, D/LL = Deadlocking Latch, DB = Deadbolt, L = Latch Bolt Through Fixings - ● = Handles KA = Keyed Alike Only G = Master Keyed Grouping Finish - Sim Brass = Simulated Brass

5 Lever

3 Lever

Sim Brass

Sim Brass

M11


• 5 Detainer mortice deadlocking latch suitable for external wooden doors where slam action is required.• The door is secured by an automatic deadlocking action, whilst the snib can be used to hold back when the door needs to be left ajar.• Operating handle on the inside can be secured by key from either side. Also increases security of deadlocking.• Masterkeyable with other detainer locks. • Can be modified for use as a fire escape lock (3R35X)

by inhibiting the facility to lock the handle. • Key operation from both sides, handle from either side, • Handle fitted to one side only (inside) 3R35X.

Detainer

Detainer

• 5 Detainer mortice lock combining a key operated deadlockingaction with the facility for using handles.

• Key and handle operation from both sides of the door. • Masterkeyable with other detainer locks.

3R35/3R35X Deadlocking Latch

3K70 Sashlock

• 5 Detainer Horizontalmortice lock for mainentrance or inter-communicating doorswhere door knobs arepreferred and a keyoperated deadlockingaction is required.

• Key and handle/knoboperation from both sidesof the door.

• Masterkeyable with other detainer locks.

80mm

148mm

178mm

200mm

44mm

165mm

29mm

98mm

14mm

15

19

67mm 83mm

178mm143

10

25mm

15

19

29mm

56

38

73mm25mm

29mm

44mm

14mm

19

148mm178mm

200mm

56

3R35 3R35X 3J60 3K70

DL/L

Auto

Auto

80

50

56

●

●

DL/L

Auto

Auto

80

50

56

●

●

L/DB

Key

Key

165

83

n/a

●

L/DB

Key

Key

73

44

56

●

●

Security Features

O

●

●

G

10

●

●

●

G

10

●

●

●

G

10

O

●

●

●

G

10

SawResistant

ForceResistant

PickResistant

Escape

Key Control

Guarantee

ProtectedSection

DrillResistant

Security Features

Locking Mechanism




Door Specification

Case Size (mm)

Backset (mm)

Centres (mm)

Case Finishes

Brass

Satin

Other

3J60 Horizontal 2-bolt Lock

Escape


5 Lever

• 5 Lever mechanism suitable for use on external doors.

• Key operation from both sides of the door.

3G115 Deadlock

Detainer

• 5 Detainer mortice lock for sliding or hinged doors.• The hook bolt clutches the lock to the door frame, whilst a

‘steady’ bolt prevents the door being lifted to release the hook. • Key operation from both sides of the door.• Masterkeyable with other detainer locks.• Available on patented Chubb RKS system.

• 5 Detainer mortice lock which is suitable for sliding doors requiring an automatic closing action.

• Handles can be fitted to one or both sides and the key can be used on either side to secure both the bolt and handle(s) & release hook.

• A projecting stump on the forend engages into the locking plate to prevent the door being lifted from the frame in the closed position.

• Bolt through fixing also provided.• Masterkeyable with other detainer locks.• Available on

patented Chubb RKS system.

3M50 Hook Bolt 3M51 Clutch Bolt

3K75 Sashlock

• 5 Lever mechanism suitable for use on external doors.

• Key and handle operation from both sides of the door.

144mm

77mm 108mm 153mm

14mm

159mm

67/80mm

40/53mm

25mm 30mm

133mm 178mm

67/80mm

40/53mm

25mm

14mm

29mm

225mm

178mm

70mm

144mm 178mm

43mm

25mm29mm

15

225mm

70mm

43mm

25mm

15mm

29mm

3M50 3M51 3G115 3K75

Hookbolt

Key

Key

70

43

n/a

Sim. Brass

Hookbolt

Key

Key

70

43

57

Sim. Brass

DB

Key

Key

67/80

40/53

n/a

●

●

R, DB

Key

Key

67/80

40/53

57

●

●

Security Features

●

●

●

●

G

10

●

●

●

●

G

10

●

●

●

10

●

●

●

10

SawResistant

ForceResistant

PickResistant

Escape

Key Control

Guarantee

ProtectedSection

DrillResistant

Security Features

Locking Mechanism




Door Specification

Case Size (mm)

Backset (mm)

Centres (mm)

Case Finishes

Brass

Satin

Other

M13

70mm 145mm

108mm

57mm

44/57mm

25mm

12.5mm

177mm 200mm

25mm

12.5mm

30mm

160mm

44/57mm

65/77mm


3 Lever

• 3 Lever mechanism suitable for internal doors.• Key operation from both sides of the door.• Ideal as an upgrade lock as it will replace most other 3 lever

mortice deadlocks with the minimum of carpentry.

• 3 Lever mechanism suitable for internal doors.• Key and handle operation from both sides of the door.• Ideal as an upgrade lock as it will replace most other 3 lever

mortice Sashlocks with the minimum of carpentry.

5 Lever

• 5 Lever mechanism suitable for use on external doors.• Key operation from both sides of the door.• Ideal as an upgrade lock as it will replace most other lever

mortice deadlocks with the minimum of carpentry.

• 5 Lever mechanism suitable for use on external doors.• Key and handle operation from both sides of the door. • Ideal as an upgrade lock as it will replace most other lever

mortice sashlocks with the minimum of carpentry.

3U115 Deadlock 3U75 Sashlock

3U177 Deadlock N E W 3U277 Sashlock N E W

44/57mm

145mm 160mm70mm

25mm 30mm

67/80mm

25mm 30mm

14mm

57mm177mm 168mm

67/80mm

44/57mm

14mm

3U115 3U75 3U177 3U277

DB

Key

Key

67/80

44/57

n/a

●

●

L, DB

●

Key

Key

67/80

44/57

57

●

●

DB

Key

Key

65/77

44/57

n/a

●

●

L, DB

●

Key

Key

65/77

44/57

57

●

●

Security Features

●

●

10

●

●

10

●

10

●

10

SawResistant

ForceResistant

PickResistant

Escape

Key Control

Guarantee

ProtectedSection

DrillResistant

Security Features

Locking Mechanism




Door Specification

Case Size (mm)

Backset (mm)

Centres (mm)

Case Finishes

Brass

Satin

Other

108mm

65/77mm

30mm


A selected number of Chubb Mortice Locks are available on a restricted key system.This offers extra protection against unauthorised key duplication. Additional keysare only available through authorised Chubb RKS Centres.

Size

13mm

19mm

25mm

3R35

✔

✔

✔

Patented Key Systems

Rebate Sets


3R35X

✔

✔

✔

3J60

Satin only

Satin only

Satin only

3K70

✔

✔

✔

3M50

-

-

-

3M51

-

-

-

3U177

-

-

-

3U277

-

-

-

3G115

✔

✔

✔

3K75

✔

✔

✔

3U115

✔

✔

✔

3U75

✔

✔

✔

3G114

3K74

✔

✔

System Available on the following

3U677 Mortice Latch N E W

• Medium duty latch.

• Handle operation from either side of the door.

• Suitable for use with unsprung handles.

3R35 ✔


3K70 ✔


25.5mm

11mm

24mm16mm65/77mm

70mm57mm

120.5mm

44/57mm

• Only suitable for3R35.

• Only suitable for3J60.

• Only suitable for3K70, 3C20.

• Only suitable for3G114, 3G115, 3G117.

• Only suitable for3K74, 3K75, 3K77.



C y l i n d e r M o r t i c e L o c k s

High Security

3C14/C

Security Case Only

3C14 3C24 3C10 3C203C24/C

Prot

ecte

d Se

ctio

n

Prot

ecte

d

Sect

ion

Dri

ll Re

sist

ant

Saw

Re

sist

ant

Forc

e Re

sist

ant

Pick

Re

sist

ant

Key

Cont

rol

Esca

pe

Gua

rant

eeLocking Bolt Deadlocking

Mechanism Through Internal ExternalFixings

DB ▲ Key Key

L, DB ●▲ Key Key

DB ▲ Key/Turn Key

L, DB ●▲ Key/Turn Key

DB ▲ Key/Turn Key



67mm 40mm n/a

67mm 40mm 48mm

67mm 40mm n/a

67mm 40mm 48mm

73mm 44mm n/a

73mm 44mm 53mm

● ●

● ●

● ●

● ●

● ●

● ●


Security Features

Case Finishes

● ● ● ● 15

● ● ● ● 15

● ● ● n/a 15

● ● ● n/a 15

● ● n/a 15

● ● n/a 15

SatinBrass Other

High Security

Cylinder Mortice Locks

Security Case Only

3C14/C

3C24/C

3C14

3C24

3C10

3C20

Key: Protected Section - O = Optional Locking Mechanism - R = Rollerbolt, DB = Deadbolt, L = Latch Bolt Through Fixings - ● = Handles, ▲ = Security Rose

BS3621

BS3621

M16

Page

M17Page

M17Page

M17Page

M17Page

M18Page

M18

Escape


Security Case Only

• Manufactured to the same high security specifications as the 3C14/C.

• This heavy duty mortice deadlock case accommodates most euro profile cylinders.

• Extra long deadbolt with 20mm throw.• Case size 67mm only.

• Manufactured to the same high security specifications as the 3C24/C.• This heavy duty mortice lock case accommodates most euro

profile cylinders.• Easily reversible latchbolt.• Extra long deadbolt with 20mm throw.• Case size 67mm only.

3C14 Deadlock

High Security

• Kitemarked to BS3621. Recommended by Insurance companies and the Police.

• Key operation from both sides of the door.• Supplied complete with security escutcheon and 6 pin euro

profile cylinder. • Extra long deadbolt with 20mm throw.• Case size 67mm only.

• Kitemarked to BS3621. Recommended by Insurance companies and the Police.

• Key and handle operation from both sides of the door.• Easily reversible latchbolt.• Supplied complete with security escutcheon and 6 pin euro

profile cylinder. • Extra long deadbolt with 20mm throw.• Case size 67mm only.

3C14/C Deadlock 3C24/C Sashlock

3C24 Sashlock

67mm

76mm 153mm 200mm

20mm

20mm

20mm

20mm

25mm

29mm

153mm 200mm

67mm

40mm

25mm

29mm

108mm

153mm

200mm

67mm

40mm

25mm

29mm

40mm

67mm

76mm 153mm 200mm

25mm

29mm

40mm

3C14/C 3C24/C 3C14 3C24

DB

●

Key

Key

67

40

n/a

●

●

L, DB

●▲

Key

Key

67

40

48

●

●

DB

●

Key/Turn

Key

67

40

n/a

●

●

L, DB

●▲

Key/Turn

Key

67

40

48

●

●

Security Features

●

●

●

●

15

●

●

●

●

15

●

●

●

n/a

15

●

●

●

n/a

15

SawResistant

ForceResistant

PickResistant

Escape

Key Control

Guarantee

ProtectedSection

DrillResistant

Security Features

Locking Mechanism




Door Specification

Case Size (mm)

Backset (mm)

Centres (mm)

Case Finishes

Brass

Satin

Other

108mm

48mm

48mm

M17


Security Case Only


• Suitable for hinged wooden doors of not less than 40mm thick.• Two independently operated levers within the case control

deadlocking of the bolt and will frustrate manipulation at the locking mechanism by attempting to by-pass the cylinder.

• Bolt through fixings.


• Suitable for hinged wooden doors where handle operation is required.

• 64mm (21/2”) and 76mm (3”) case sizes available.

• Bolt through fixings.

3C10 Deadlock

Size

13mm

19mm

25mm

Rebate Sets


3C14

✔

--

3C24

---

3C10

✔

✔

✔

3C20

✔

✔

✔

3C20 Sashlock

73mm

14mm

25mm

29mm

122mm 178mm 178mm

44mm

73mm

148mm

53mm200mm

178mm

25mm

44mm

14mm

29mm

3C10 3C20

DB

●

Key/Turn

Key

73

44

n/a

●

●

L, DB

●

Key/Turn

Key

73

44

53

●

●

Security Features

O

●

●

n/a

15

O

●

●

n/a

15

SawResistant

ForceResistant

PickResistant

Escape

Key Control

Guarantee

ProtectedSection

DrillResistant

Security Features

Locking Mechanism




Door Specification

Case Size (mm)

Backset (mm)

Centres (mm)

Case Finishes

Brass

Satin

Other

3C14/C

✔

--

3C24/C

---

• Only suitable for3C14.



A r c h i t e c t u r a l C y l i n d e r M o r t i c e L o c k s

Architectural Case Only

C2422Page

M20 C2454 C2420 C2455 C2465 C2421 C2486 C2424

Prot

ecte

d Se

ctio

n

Prot

ecte

d

Sect

ion

Dri

ll Re

sist

ant

Saw

Re

sist

ant

Forc

e Re

sist

ant

Pick

Re

sist

ant

Key

Cont

rol

Esca

pe

Gua

rant

ee

Locking Bolt DeadlockingMechanism Through Internal External

Fixings


DB ▲ Key/Turn Key


DB ▲ Key/Turn Key

L ●

DL/L ●▲ Auto Auto

L, DB ● Turn



92mm 60mm 72mm

92mm 60mm

92mm 60mm 72mm

92mm 60mm

92mm 60mm 72mm

92mm 60mm 72mm

92mm 60mm

92mm 60mm 72mm

St. Steel

St. Steel

St. Steel

St. Steel

St. Steel

St. Steel

St. Steel

St. Steel


Security Features

Case Finishes

O ● ● 10

O ● ● 10

O 10

O 10

O 10

O 10

10

O ● ● 10

SatinBrass Other

Architectural Case

Mortice Locks

C2422 Sashlock

C2454 Deadlock

C2420 Sashlock

C2455 Deadlock

C2465 Latch

C2421 Deadlocking Latch

C2486 Bathroom Lock

C2424 Escape Lock

Key: Protected Section - O = Optional Locking Mechanism - L = Latchbolt, DL/L = Deadlocking Latch, DB = Deadbolt Bolt Through Fixings - ● = Handles, ▲ = Security Rose Finish - St. Steel = Stainless Steel

Page

M20Page

M20Page

M20Page

M21Page

M21Page

M21Page

M21


• European size 72mm centres mortice lock case which accommodates most euro-profile cylinders.

• Key and handle operation from both sides of the door. Latchbolt operated by key.

• Extra long deadbolt with 20mm throw.• Easily reversible latchbolt.

S tandard Case Only

Security Case Only

• European size mortice lock case which accommodates most europrofile cylinders.

• Key operation from both sides of the door. • Extra long deadbolt with 20mm throw.

• European size 72mm centres mortice lock case which accomodates most euro-profile cylinders.


• 14mm throw deadbolt.• Easily reversible latchbolt.

• European size mortice lock case which accommodates most europrofile cylinders.

• Key operation from both sides of the door. • 14mm throw deadbolt

C2422 Sashlock N E W C2454 Deadlock N E W

C2420 Sashlock N E W C2455 Deadlock N E W

C2422 C2454 C2420 C2455

L, DB

●▲

Key/Turn

Key

92

60

72

St. Steel

DB

▲

Key/Turn

Key

92

60

St. Steel

L, DB

●▲

Key/Turn

Key

92

60

72

St. Steel

DB

▲

Key/Turn

Key

92

60

St. Steel

Security Features

O

●

●

10

O

●

●

10

O

10

O

10

SawResistant

ForceResistant

PickResistant

Escape

Key Control

Guarantee

ProtectedSection

DrillResistant

Security Features

Locking Mechanism




Door Specification

Case Size (mm)

Backset (mm)

Centres (mm)

Case Finishes

Brass

Satin

Other

165mm

72mm235mm

92mm24mm

24mm

20mm

18mm

60mm

165mm

72mm235mm

92mm24mm

24mm

14mm

18mm

60mm

92mm24mm

22mm

14mm

60mm

165mm

235mm

90mm

72mm159mm

90mm

92mm24mm

22mm

20mm

60mm

166mm

166mm



• Handle operation from both sides of the door. • Easily reversible latchbolt.

S tandard Case Only

Standard Case Only



• Autodeadlocking latch, everytime the door is closed it is locked.• Easily reversible latchbolt.

• European size 72mm centres mortice lock case.• Handle operation from both sides of the door.• Easily reversible latchbolt.

• European size 72mm centres mortice lock case which accommodates most euro-profile cylinders.


• Extra long deadbolt with 20mm throw.• Single action escape action. One downwards movement of the

handle withdraws both the bolts simultaneously.• Easily reversible latchbolt.

C2465 Mortice Latch N E W C2421 Deadlocking Latch N E W

C2486 Bathroom Lock N E W C2424 Escape Lock N E W

C2465 C2421 C2486 C2424

L

●

92

60

72

St. Steel

DL/L

●▲

Auto

Auto

92

60

72

St. Steel

L, DB

●

Turn

92

60

St. Steel

L, DB

●▲

Key/Turn

Key

92

60

72

St. Steel

Security Features

O

10

O

10 10

O

●

●

10

SawResistant

ForceResistant

PickResistant

Escape

Key Control

Guarantee

ProtectedSection

DrillResistant

Security Features

Locking Mechanism




Door Specification

Case Size (mm)

Backset (mm)

Centres (mm)

Case Finishes

Brass

Satin

Other

165mm

72mm235mm

92mm24mm

24mm18mm

60mm

79mm

165mm

235mm

92mm24mm

14mm

24mm18mm

60mm

166mm

165mm

72mm235mm

92mm24mm

20mm

24mm18mm

60mm

166mm

165mm

72mm235mm

92mm24mm

24mm18mm

60mm

166mm

Security Roses3C14/E


3CE

3C14E

3C14E

38mm

3CE

38mm

54mm

10mm

• The following chart provides details of the various mortice keyblanks available.

Keyblanks

Key Number

K521

K722

K727

RKS Blank

RKS Blank

Suitable For:

Detainer Range Mortice Locks

BS and Non BS Range Lever Mortice Locks

6 Pin Cylinder Range

3G114, 3K74

3G110, 3R35, 3K70

• Ideal for use with euro-profile cylinder mortice lock cases.

Notes

M22

54mm

10mm

R i m L o c k s

Rim

Lo

ck

s

• H i g h S e c u r i t y

• D o u b l e S e c u r i t y

• D r a w b a c k L o c k

• S e c u r i t y R a n g e

• T r a d i t i o n a l S e c u r i t y


1

2

3

4


5

6

8

9

10

11

12












7



Rim Locks Index

• Introduction

• What Type of Door ?

• What is Backset ?


• Photo Gallery

• Range Table

• High Security

• Double Security

• Drawback Lock

• Security

• Traditional Security

• Replacement Cylinder

• Cylinder Pull

• Multi-Point

• Notes Page

RL2

RL3

RL3

RL3

RL4

RL5

RL6

RL6

RL7

RL7

RL8

RL8

RL8

RL9

RL10RL11

Chubb offer a comprehensive range of cylinder rimlocks which are ideal for both architecturalapplication and residential use.

The range includes a high security variant,kitemarked to BS3621, for use on external doors, aswell as standard variants for internal doors or whenused with a Chubb mortice deadlock on externaldoors.




Example: If you require a rimlock that has hardenedprotection against drill attack, look for the DrillResistant icon (number 2) in the range table.


The National House Building Counciloffers general guidance on security fordwellings, flats and maisonettes.

The Association of British Insurersprovides minimum securityrecommendations for external doors andwindows.

Products endorsed with the Kitemarkhave passed a strict testing procedureunder the control of the British StandardsInstitution.

The Master Locksmiths Associationprovides guidelines covering minimumsecurity levels for domestic properties.

R i m L o c k s

Keying Groups


The information shown under this heading canhelp you identify which products can be KeyedAlike or Masterkeyed.

The products that can be keyed to work with otherproducts are given a group code.

KA - means the product can be Keyed Alike withmore of the same product.

MK - means the product can be Masterkeyed withmore of the same product.

A Group Letter (eg A) means the product can beKeyed Alike or Masterkeyed with more of the sameproduct and with other products listed in the samegroup.

For the complete range of products and theirkeying groups, see the chart in the introductionsection. At least 2 keys are supplied as standard, however see

the price list for any variations.

Key Control

Keys

BS3621

RL2

R i m L o c k s

Finishes:


and interior glass panelled or solid timber doors.

• Variants available for outward opening doors.

• Locks available to suit doors between 38mm and 57mm thick.

What i s Backset?• This is the measurement from the edge of the

door to the centre of the keyhole.

• Locks are commonly supplied with either a 40mm or 60mm backset.

• Locks with a 40mm backset are normally used where there is restricted space, such as on a glass panelled door.

Automatic (every time the door isclosed it is deadlocked)

BS3621Recommended bythe Police and theInsuranceCompanies

Key(by a reverse turn of the key in the outside cylinder)

Snib(Internal snib button)

InternalKey

Either a slide, push buttonor turn of pull back handleto hold the bolt in the case.

DeadlockingLatch

▼

*All locks are supplied complete with at least two keys as standard.


Deadbolt

Latch

Multi-PointInternal handle(by turn of key in handle)

Key in outsidecylinder

Brasslux Grey Champagne Gold White Gold Enamelled Chrome Plated

Ideal for Use with: Mortice Deadlocks & Access Control Systems

●

▲

DL/L MP

DB

L

Backset

Edgeofdoor

Deadlocking =

Locking the bolt so that it cannot be forced back.

Lockable Handle = Prevents someone reaching in andopening the door

Bolt Hold Back

Locking Mechanism = the means by which the door is held closed

Force ResistantMeets the force requirementsof BS3621.


Torque ResistantSide lugs restricting twisting ofcylinder.


Drill ResistantHardened Steel Inserts in theoutside cylinder.

Saw ResistantHardened steel bolt, plates orhardened rollers.

Tamper Resistant Concealed fixings when door isclosed.

Key ControlCan be Masterkeyed or KeyedAlike (KA).

T G


Door Types

T Solid Timber

G Glass Panelled

RL3

R i m L o c k s

High Security

4L67 Page

RL6

Double Security

4L73 Page

RL6 4L74 Page

RL6

Cyl inder

4LC Page

RL8

Security

4L71 Page

RL7 4L72 Page

RL7

Cyl inder Pul l

4LP Page

RL8

Tradit ional

4L75 Page

RL8

Drawback Lock

4L69 Page

RL7 4L70 Page

RL7

Drawback Lock

CTS10TX Page

RL9

Mult i -Point

CTS30TX Page

RL9 CTS50TX Page

RL9

RL4

Door Backset Type ofThickness Door

Locking Lockable Bolt Hold DeadlockingMechanism Handle/Knob Back

Door SpecificationFeatures / Functions Case Finishes

Gold Enamelled

Gold Enamelled

Gold Enamelled

4L67 Standard

4L73 Narrow

4L74 Standard

4L69 Standard

4L70 Narrow

4L71 Narrow

4L72 Standard

4L75 Standard

CTS10TX

CTS30TX

CTS50TX

● ● ● ● ● ● 10

● ● ● ● 10

● ● ● ● 10

● ● ● 10

● ● ● 10

● ● ● 10

● ● ● 10

● ● 10

● ● ● ● ● 10

● ● ● ● ● 10

● ● ● ● ● 10

DB ● ● Auto Auto

DL/L ● ● Auto Auto

DL/L ● ● Auto Auto

DB/L ● Key Key

DB/L ● Key Key

DL/L ▲ ● Auto Auto

DL/L ▲ ● Auto Auto

DL/L ▲ ● Snib Key

DB,L ● Key Key

MP ● Key Key

MP ● Key Key

38-57mm 60mm T, GP

38-57mm 40mm T, GP

38-57mm 60mm T, GP

38-57mm 60mm T, GP

38-57mm 50mm T, GP

38-57mm 40mm T, GP

38-57mm 60mm T, GP

38-57mm 60mm T, GP

up to 48mm 53mm T, GP



●

● ● White

● ● White

● ●

● ●

● ● White

● ● White

● ●

ExternalInternalChampagne

GoldBrasslux Other

High Security

Drawback Lock

Tradit ional

Security

Mult i -Point

Double Security

R i m L o c k s

Key: Locking Mechanism - L = Latchbolt, DL/L = Deadlocking Latch, DB = Deadbolt, MB = Multi-Bolt, MP = Multi-Point Lockable Handle - ● From Inside, ▲ From Outside only Type of Door - T = Timber, GP = Glass Panelled

NEW

NEW

NEW

BS3621

Prot

ecte

d Se

ctio

n

Prot

ecte

d

Sect

ion

Dri

ll Re

sist

ant

Saw

Re

sist

ant

Forc

e Re

sist

ant

Pick

Re

sist

ant

Torq

ue

Resi

stan

t

Tam

per

Resi

stan

t

Key

Cont

rol

Gua

rant

ee

Security Features

RL5

R i m L o c k s


• High Security 10 disc Ava mechanism providing a high level of protection against picking and manipulation.

• Hardened steel deadbolt which automatically deadlocks on closing the door.

• Key operation from the outside. Key lockable knob operation from inside.

• Keyblank number, B-K734-M.

BS3621: 1980

• Latchbolt automatically deadlocks on closing the door.

• Key operation from outside. Key lockable lever handle operation from inside.

• Keyblank number, B-K727.

High Security

4L67

4L73 4L74

4L67

Double Security4L73 4L74

4L67 4L73 4L74

DB

●

●

Auto

Auto

38-57mm

60mm

T, GP

●

DL/L

●

●

Auto

Auto

38-57mm

40mm

T, GP

●

●

DL/L

●

●

Auto

Auto

38-57mm

60mm

T, GP

●

●

Security Features

●

●

●

●

●

●

10

●

●

●

●

10

●

●

●

●

10

Features / Functions

Locking Mechanism

Lockable Handle

Bolt Hold Back



Door Specification

Door Thickness

Backset

Type of Door

Case Finish

Champagne Gold

Brasslux

Other White White

57mm

29mm

20mm

22mm

29mm

30mm

88mm

13mm

88mm

16mm

B

A

A B4L73 65mm 40mm4L74 85mm 60mm

53mm

27mm

26mm

60mm

85mm

18mm

25mm

70mm

27mm

37mm

70mm

SawResistant

ForceResistant

PickResistant

TamperResistant

Key Control

Guarantee

ProtectedSection

DrillResistant

RL6

TorqueResistant

TorqueResistant

R i m L o c k s

• Double throw deadbolt giving 20mm projection.

• Key operated deadbolt from either side.

• Latchbolt key operated from outside, handle operated from inside.


• Latchbolt automatically deadlocks on closing the door.

• Key operation from outside. Lever handle operation from inside.

• Security lock with deadlocking by reverse turn of key in outside cylinder.


Drawback Lock

4L69 4L70

4L71 4L72

Security

4L69 4L70

4L71 4L72

74mm

10mm

20mm

12mm

A

B47mm

31mm

22mm

29mm

74mm

27mm

A B4L69 92mm 60mm4L70 73mm 50mm

A B4L71 60mm 40mm4L72 92mm 60mm

45mm

25mm

5mm

74mm

15mm

74mm

30mm

25mm

22mm

B

A

4L69 4L70 4L71 4L72

DB, L

●

Key

Key

38-57mm

60mm

T, GP

●

●

DB, L

●

Key

Key

38-57mm

50mm

T, GP

●

●

DL/L

▲

●

Auto

Auto

38-57mm

40mm

T, GP

●

●

DL/L

▲

●

Auto

Auto

38-57mm

60mm

T, GP

●

●

Security Features

●

●

●

10

●

●

●

10

●

●

●

10

●

●

●

10

Functions

Locking Mechanism

Lockable Handle

Bolt Hold Back



Door Specification

Door Thickness

Backset

Type of Door

Finishes

Champagne Gold

Brasslux

Other WhiteWhite

SawResistant

ForceResistant

PickResistant

TamperResistant

Key Control

Guarantee

ProtectedSection

DrillResistant

RL7

R i m L o c k s

Tradit ional Security

Replacement Cyl inder Cyl inder pul l

4L75

4LC 4LP

41mm

68mm

60mm

92mm

15mm

24mm

25mm

24mm

19mm

68mm

4mm

4L75 4LC

DL/L

▲

●

Snib

Key

38-57mm

60mm

T, GP

●

●

38-57mm

●

Security Features

●

●

10

Optional

●

●

10

Functions

Locking Mechanism

Lockable Handle

Bolt Hold Back



Door Specification

Door Thickness

Backset

Type of Door

Finishes

Champagne Gold

Brasslux

Other

• Spare or replacement pin tumbler rim cylinder.• Available as 6 pin as standard.• Keyblank number, 6 pin = B-K727.

• Also available onChubb TXpatented system.List number TXR,(see cylindercatalogue).

• Provides an easy means of closing a door from the outside.• Suitable for use with all Chubb Cylinder Rim Locks.• Available in brass.

For use with:

4L71 ✓

4L72 ✓

4L75 ✓

• Classic styling with deadlocking by snib.

• Key operation from the outside. Lever/knob handle operation from inside.

• Security lock with deadlocking by reverse turn of the key in outside cylinder.


4L75

47mm

70mm

46mm Ø

32mm

5mm

18mm

SawResistant

ForceResistant

PickResistant

TorqueResistant

TamperResistant

Key Control

Guarantee

ProtectedSection

DrillResistant

RL8

R i m L o c k s

• Multiple locking points from 3 to 5.

• Supplied complete with High Security Patented TXSystem and security rose.

• Key operation from outside, key and lever frominside.

• Keyblank number CTXRKB

• Supplied complete with High SecurityPatented TX System and security rose.

• Key operation from outside, key and pullhandle from inside.

• Keyblank number TXRKB

Mult i Point Drawback LockCTS30TX, CTS50TX N E W CTS10TX N E W

CTS30TX = 3 CTS50TX = 5

Door Size CTS30TX CTS50TX

Standard 2215mm 2215mm

Max. Std. 2215mm 2215mm

Max. Special 2460mm 2460mm

Minimum 1850mm 1850mm

518mm

179mm

179mm

31mm

45mm

35mm

62mm

20mm

53mm

12.5mm

100mm

362mm

179mm

424mm

100mm

35mm

35mm35mm35mm

45mm

20mm20mm

53mm53mm

12.5mm

35mm

532mm

2215

mm

980mm

179mm

1056mm

2215

mm

45mm

CTS30TX CTS50TX

CTS30TX CTS50TX

CTS10TX CTS30TX CTS50TX

DB, L

●

Key

Key

up to 48mm

53mm

T, GP

MP

●

Key

Key

up to 45mm

53mm

T,GP

MP

●

Key

Key

up to 45mm

53mm

T, GP

Security Features

●

●

●

●

●

10

●

●

●

●

●

10

●

●

●

●

●

10

Functions

Locking Mechanism

Lockable Handle

Bolt Hold Back



Door Specification

Door Thickness

Backset

Type of Door

Finishes

Champagne Gold

Brasslux

Other Gold Enamel led

SawResistant

ForceResistant

PickResistant

TorqueResistant

TamperResistant

Key Control

Guarantee

ProtectedSection

DrillResistant

12.5mm35mm

RL9

P1

P a d l o c k s

Pa

dlo

ck

s

• C o n q u e s t

• S t e e l

• A l u m i n i u m

• L a m i n a t e d S t e e l

• B r a s s

• H a s p s a n d S t a p l e s

P2


1

2

3

4


5

6

8

9

10

11

12












7


Keying Groups Test ing

Padlocks Index

P a d l o c k s

• Introduction

• Padlock Choice

• Shackle Information


• Photo Gallery

• Range Table

• Conquest Range

• Battleship

• Cruiser

• Hercules

• Ava Brass

• Steel Range

• Aluminium Range

• Laminated Steel Range

• Brass Range

• Hasps and Staples Gallery

• Hasps and Staples Range Table

• Padbars

• Hasps and Staples

• Notes Page

P2

P3

P3

P3

P4

P5

P6

P7

P7

P7

P7

P8

P9

P9

P10-11

P12

P12

P13

P14

P15

Chubb offer a comprehensive range of padlockswhich are ideal for commercial, industrial andresidential use.

The range includes open, close and extra closevariants to suit the particular application, togetherwith a choice of hardened steel or stainless steelshackle.

In addition, a range of hasps and staples is availableto complement the padlock range.







Example:A padlock in group H could be made to work fromthe same key as other products in group H.


How to SpecifyChubb have developed a series of icons to enablethe process of product specification to besimplified.From today you can specifically detail yourrequirements for a product, therefore ensuring thatit includes particular security features.

Example: If you require a padlock that hashardened protection against drill attack, look forthe Drill Resistant icon (number 2) in the rangetable on page 5 and then on subsequent pageswhere further product information is supplied.


As part of the Chubb commitment to provideproduct to meet customer requirements, Chubbpadlocks are subjected to exacting testprogrammes. These test padlocks for operating durability,resistance to corrosion as well as strength againstdifferent forms of attack such as drilling, sawingand twisting.

Key Control

P3

P a d l o c k s

Shackle Type

Open

Close

Concealed

Body Materials

Rectangular

Long

Force ResistantRobust construction to resistdetermined attack.

Saw ResistantHardened steel shackle or staplenot less than 8mm diameter.


Torque ResistantRigid construction to resisttwisting.


Drill ResistantSelected hardened or toughmaterials to resist drill attack.

▼


Hardened Steel

Aluminium

LaminatedSteel

Brass

Shackle Materials

Hardened Steel

StainlessSteel

Operating Mechanism

Locking

Key Snap

Key Retention =

When the padlock is open the key cannot be removed.

Ideal for Use with: Hasps and Staples and Security Chains

Corrossion Resistant Successfully completed neutralsalt spray test.

Tamper ResistantConcealed fixings (Hasps only).

Key ControlProducts are Masterkeyble orable to be Keyed Alike.


Padlock Choice• Choice of padlock is based upon specific application

and the relative degree of risk associated with that location.

• These factors determine whether an open shackle, close shackle or rectangular padlock is required and whether a sprung or unsprung mechanism is preferred.

• Choice of hasp or staple is also dependent upon application and the relative degree of risk associatedwith that location.

Shackle Information

D

CNo Optional OYes ●

Rekeyable =Padlock key combination can be changed bylocal dealer.

NoYes ●

StainlessSteel

F

Type5 common types offering different clearancesand therefore different security features andapplication opportunities.

Diameter (D)

The shackle is the fixing point of the padlockand the diameter is critical to ensuring the rightlevel of security is offered and the padlock isideal for the application where it is going to be used.

Clearance (C) (F)

The clearance here is the vertical (C) or horizontal (F) clearance as shown.

Chubb, simplyfying the specification process

P4

Conquest

Hercules Brass Steel

Laminated

1K12 Page

P6

P a d l o c k s

1K57 Page

P7 1K42 Page

P7 1K941 Page

P8 1K950 Range Page

P8 1K952 Page

P8 1KD01 Page

P8

Aluminium

1K240 & 1K250Page

P9

1K840, 1K841& 1K850

Page

P9 1K600 Range Page

P10

Brass

1K360 & 1K375 Page

P101K642 & 1K652 Page

P101K730, 1K740& 1K750

Page

P11 1K401& 1K501Page

P11

1K13 Page

P6 1K22 Page

P6 1K23 Page

P6 1K23/GB Page

P6Page

P7Page

P7

Batt leship Cruiser

1K11 1K21

P5

Prot

ecte

d Se

ctio

n

Prot

ecte

d

Sect

ion

Dri

ll Re

sist

ant

Saw

Re

sist

ant

Forc

e Re

sist

ant

Pick

Re

sist

ant

Torq

ue

Resi

stan

t

Tam

per

Resi

stan

t

Key

Cont

rol

Corr

osio

n

Resi

stan

t

Gua

rant

ee

Shackle Shackle Locking Type Diameter Mechanism

SpecificationFeatures / Functions

Security Features

Shackle Material

● ● ● ● ● N/A ● H* 10

● ● ● ● ● N/A ● KA 10

● ● ● ● ● N/A ● H* 10

● ● ● ● ● N/A ● KA 10

● ● ● ● ● N/A ● H* 10

● ● ● ● N/A KA 10

● ● ● ● N/A KA 10

● ● ● ● ● N/A ● H* 10

● ● ● ● N/A ● H* 10

● ● N/A ● 5

● ● ● N/A ● 5

● ● ● ● ● N/A ● 5

● ● ● ● ● N/A ● 5

● ● ● ● ● N/A ● 5

● ● ● N/A ● 5

● N/A ● 5

● N/A ● 5

N/A 5

N/A 5

● ● N/A 5

N/A ● 5

N/A ● KA 5

N/A ● KA 5

N/A ● 5

N/A ● 5

● N/A ● 5

● N/A ● 5

● N/A ● 5

● ● N/A ● 5

● ● ● N/A ● 5

N/A ● 5

N/A ● KA 5

● N/A ● 5

● N/A ● 5

● N/A ● 5

● ● (not A)

● ●

● ● (not A)

● ●

● ●

● ● (not A)

●

●

●

●

●

●

●

●

●

Close 14mm 15mm Key

Close 14mm 15mm Key

Open 14mm 30mm Key

Open 12.5mm 30mm Key

Close 12.5mm 24mm Key



Concealed 16mm N/A Key

Open 8mm 24mm Key

Open 6mm 50mm Snap

Open 8mm 27mm Snap

Open 9.5mm 27mm Snap

Open 11mm 27mm Snap

Close 9mm 28mm Snap

Close 10mm 17mm Key

Open 6mm 25mm Snap


Open 6mm 22mm Snap

Open 6mm 62mm Snap

Open 9mm 26mm Snap

Open 4mm 14mm Snap

Open 5mm 19mm Snap

Open 6mm 23mm Snap

Open 6mm 62mm Snap

Close 7mm 19mm Snap

Open 8mm 30mm Snap

Close 9mm 21mm Snap


Close 10mm 12mm Snap

Close 11mm 13mm Snap

Open 5mm 18mm Snap

Open 6mm 22mm Snap

Open 8mm 29mm Snap


Open 9mm 30mm Snap

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Stainless

Stainless

●

●

●

●

●

●

●

●

●

●

●

●

●

Stainless

Stainless

Stainless

●

●

Hardened Steel

Other

Heavy Duty

P a d l o c k s

Steel

1K12C or A (Conquest)1K13C (Conquest)1K22C or A (Conquest)1K23C (Conquest)1K23C/GB (Conquest)1K11 (Battleship)1K21 (Cruiser)1K57C or A (Hercules)1K42 (Ava Brass)

1K9411K9451K9501K9601K9521KD01 (Discus)

1K2401K250

1K8401K8411K850

1K6251K6301K6401K6411K6421K6501K6521K6601K3601K3751K7301K7401K7501K4011K501

Aluminium

Laminated Steel

Key Re-Retention Keyable

Brass

Vertical (C)Shackle

Clearance

Key: H*= Masterkey grouping which only applies to the Ava versions. Non Ava are KA only.

P6

CONQUEST

CONQUEST

• Close shackle heavy duty padlock for use in the more demanding of applications.

• Key to lock, key to unlock. Double locking.

• Key retention when the padlock is unlocked.

• Hardened steel unsprung shackle.

• Close shackle heavy duty padlock with extra high shoulders providing additional protection against bolt cropper attack. Ideal for the most demanding of applications




• Open shackle heavy duty padlock for use on the majority of security applications.




• A heavy duty modular design enabling the padlock to be used as open shackle or close shackle with the ‘Shackle Guard’.



• Hardened steel unsprung shackle. Loose shackle option available.

Conquest

1K12C

1K22C

1K13C

1K23C

1K23CGB

Conquest

1K12C • 1K12A 1K13C

1K23C · 1K23C/GB

CONQUEST

CONQUEST92mm

68mm 34mm

15mm

14mm

18mm

CONQUEST

CONQUEST

111mm

68mm 34mm

14mm

18mm

CONQUEST

CONQUEST

15mm

64mm

30mm

14mm

30mm

68mm 34mm

62mm

29mm

12.5mm

30mm

65mm25mm

1K12 1K13C 1K22 1K23C 1K23C/GB

●

● (not A)

Close

14mm

15mm

Key

●

●

●

Close

14mm

15mm

Key

●

●

● (not A)

Open

14mm

30mm

Key

●

●

●

Open

12.5mm

30mm

Key

●

●

●

Close

12.5mm

24mm

Key

●

Security Features

●

●

●

●

●

N/A

●

H*

10

●

●

●

●

●

N/A

●

KA

10

●

●

●

●

●

N/A

●

H*

10

●

●

●

●

●

N/A

●

KA

10

●

●

●

●

●

N/A

●

H*

10

SawResistant

ForceResistant

PickResistant

TorqueResistant

TamperResistant

CorrosionResistant

Key Control

Guarantee


Key Retention

Re-Keyable

Specification

Shackle Type

Shackle Diameter

Shackle Clearance

Locking Mechanism

Shackle Material

Hard Steel

Other

ProtectedSection

DrillResistant

P a d l o c k s

1K22C • 1K22A

P7

• Close shackle tough padlock for use on security applications.

• 6 lever mechanism, key to lock, key to unlock.

• Non-key retaining.


• Tough padlock for use in security applications.

• 5 lever mechanism, key to lock, key to unlock.

• Non-key retaining.


• Robust padlock, totally concealed when locked.

• Vertical sliding shackle which comes through the staple hole making direct attack impossible.

• Available with either Ava 10 disc or 6 pin locking mechanism.



• Suitable for use with Chubb 7B018 and 7B020 padlocks.

• 10 disc Ava brass padlock providing a high level of protection against picking and manipulation.

• Key retention when the padlock is unlocked.• Hardened steel unsprung shackle.

Batt leship Cruiser

1K11

1K571K42

Hercules Ava Brass

1K11 1K21

1K42

1K21

95mm

27mm

17mm

12.5mm

65mm

86mm

27mm

12.5mm

74mm

110mm

25mm

42mm

50mm23mm

24mm

8mm

69mm 50mm

17mm 17mm

17mm

Close

12.5mm

17mm

Key

●

Close

12.5mm

17mm

Key

●

●

● (not A)

Concealed

16mm

N/A

Key

●

●

Open

8mm

24mm

Key

●

Security Features

●

●

●

●

N/A

KA

10

●

●

●

●

N/A

KA

10

●

●

●

●

●

N/A

●

H*

10

●

●

●

●

N/A

●

H*

10

SawResistant

ForceResistant

PickResistant

TorqueResistant

TamperResistant

CorrosionResistant

Key Control

Guarantee


Key Retention

Re-Keyable

Specification

Shackle Type

Shackle Diameter

Shackle Clearance

Locking Mechanism

Shackle Material

Hard Steel

Other

ProtectedSection

DrillResistant

1K11 1K21 1K57 1K42

P a d l o c k s

1K57C • 1K57A

P8

• Open shackle steel padlocks for use on the majority of security applications.

• Snaplocking, key to unlock. Double locking. • Non -key retaining.

• Hardened steel sprung shackle, complete with unique shackle changing facility.

• Steel padlock for security applications requiring a close shackle option.

• Snaplocking, key to unlock. • Non - key retaining.

• Hardened steel sprung shackle, complete with unique shackle changing facility.

• Stainless steel padlock for medium security applications requiring a close shackle option.

• Key to lock, key to unlock.



S teel

1K952

1K960

1KD01

Steel Discus Steel

1K941 · 1K945 · 1K950 · 1K960

1KD011K952

79mm

19mm50mm

28mm

20mm

9mm

70mm

70mm

20mm

17mm

26mm

10mm

A

B

C

D

F

E

(mm) 1K941 1K945 1K950 1K960A 45 46 46 52B 38 45 50 63C 50 27 27 27D 6 8 9.5 11E 19 19 19 25F 20 20 20 32

●

Open

6mm

50mm

Snap

●

●

Open

8mm

27mm

Snap

●

●

Open

9.5mm

27mm

Snap

●

●

Open

11mm

27mm

Snap

●

●

Close

9mm

28mm

Snap

●

●

Close

10mm

17mm

Key

●

Security Features

●

●

N/A

●

5

●

●

●

N/A

●

5

●

●

●

●

●

N/A

●

5

●

●

●

●

●

N/A

●

5

●

●

●

●

●

N/A

●

5

●

●

●

N/A

●

5

SawResistant

ForceResistant

PickResistant

TorqueResistant

TamperResistant

CorrosionResistant

Key Control

Guarantee


Key Retention

Re-Keyable

Specification

Shackle Type

Shackle Diameter

Shackle Clearance

Locking Mechanism

Shackle Material

Hard Steel

Other

ProtectedSection

DrillResistant

1K941 1K945 1K950 1K960 1K952 1KD01

P a d l o c k s

P9

• Open shackle aluminium padlocks for use in the majority of applications. Ideal for use in harsh environments where corrosion resistance is of prime concern.

• Snaplocking, key to unlock. Double locking.

• Non -key retaining.

• Stainless steel sprung shackle, complete with unique shackle changing facility.

A luminium

1K250

Laminated Steel

1K240 · 1K250

(mm) 1K240 1K250A 46 46 B 38 50C 25 25D 6 9.5E 19 19F 20 20

1K840 · 1K841 · 1K850

A

B

C

D

F

E

B

C

D

F

E

1K850

A

(mm) 1K840 1K841 1K850A 36 36 39B 40 40 50C 22 62 26D 6 6 9E 22 22 25F 20 20 20

• Open shackle laminated steel padlocks for use in general applications.

• Snaplocking, key to unlock. Double locking.

• Non-key retaining • Hardened steel sprung shackle.

1K240 1K250 1K840 1K841 1K850

●

Open

6mm

25mm

Snap

Stainless

●

Open

9.5mm

25mm

Snap

Stainless

Open

6mm

22mm

Snap

●

Open

6mm

62mm

Snap

●

Open

9mm

26mm

Snap

●

Security Features

●

N/A

●

5

●

N/A

●

5

N/A

5

N/A

5

●

●

N/A

5

SawResistant

ForceResistant

PickResistant

TorqueResistant

TamperResistant

CorrosionResistant

Key Control

Guarantee


Key Retention

Re-Keyable

Specification

Shackle Type

Shackle Diameter

Shackle Clearance

Locking Mechanism

Shackle Material

Hard Steel

Other

ProtectedSection

DrillResistant

P a d l o c k s

P10

• Open shackle brass padlocks for general applications.

• Snaplocking, key to unlock.


• Hardened steel sprung shackle.

• Close shackle brass padlocks for general applications.




• Close shackle brass padlocks for general applications.




Brass

1K660

1K642

1K360

Brass

1K625 · 1K630 · 1K640 · 1K650 · 1K660

(mm) 1K642 1K652A 52 63B 40 50C 19 21D 7 9E 14 17F 14 19

(mm) 1K360 1K375A 73 78B 43 48C 12 13D 10 11E 18 18F 18 24

(mm) 1K625 1K630 1K640 1K641 1K650 1K660A 25 28 33 33 40 42B 25 30 40 40 50 60C 14 19 23 62 30 35D 4 5 6 6 8 9.5E 12 12 14 14 16 18F 13 16 22 22 28 35

1K642 · 1K652

A

B

C

D

F

E

A

BC

DF

E

1K360 · 1K375

●

Close

7mm

19mm

Snap

●

Close

9mm

21mm

Snap

●

Close

10mm

12mm

Snap

●

Close

11mm

13mm

Snap

●

Security Features

N/A

●

5

●

N/A

●

5

●

●

N/A

●

5

●

●

●

N/A

●

5

SawResistant

ForceResistant

PickResistant

TorqueResistant

TamperResistant

CorrosionResistant

Key Control

Guarantee

ProtectedSection

DrillResistant

1K600 1K642 1K652 1K360 1K375Range

P a d l o c k s


Key Retention

Re-Keyable

Specification

Shackle Type

Shackle Diameter

Shackle Clearance

Locking Mechanism

Shackle Material

Hard Steel

Other

Pleaserefer

to page 5

for details

A

B

C

D

F

E

P11

• Open shackle brass padlocks for general applications.

• Stainless steel sprung shackle, therefore ideal for use in harsh environments where anti-corrosion is of prime concern.



• Open shackle 6 pin brass padlock for general applications, complete with black outer sleeve.




Brass Weatherproof

1K730

1K401

Brass1K401 · 1K501

1K730 · 1K740 · 1K750

(mm) 1K730 1K740 1K750A 28 33 40B 30 40 50C 18 22 29D 5 6 8E 12 15 16F 16 23 28

(mm) 1K401 1K501A 38 45B 46 55C 25 30D 7.5 9E 20 22F 24 28

A

B

C

D

F

E

A

B

C

D

F

E

1K740

Open

5mm

18mm

Snap

Stainless

Open

6mm

22mm

Snap

Stainless

Open

8mm

29mm

Snap

Stainless

Open

7.5mm

25mm

Snap

●

Open

9mm

30mm

Snap

●

Security Features

N/A

●

5

N/A

●

KA

5

●

N/A

●

5

●

N/A

●

5

●

N/A

●

5

SawResistant

ForceResistant

PickResistant

TorqueResistant

TamperResistant

CorrosionResistant

Key Control

Guarantee


Key Retention

Re-Keyable

Specification

Shackle Type

Shackle Diameter

Shackle Clearance

Locking Mechanism

Shackle Material

Hard Steel

Other

ProtectedSection

DrillResistant

1K730 1K740 1K750 1K401 1K501

P a d l o c k s

P12

Door Shackle Hasp Staple Thickness Diameter Material Material

SpecificationFeatures / Functions Finishes

N/A ● ● ● N/A ● ● ● N/A 10

N/A ● ● N/A ● ● N/A 10

N/A ● ● N/A ● N/A 10

N/A ● ● N/A ● N/A 10

N/A ● ● N/A ● N/A 5

N/A N/A ● N/A 5

N/A N/A ● N/A 5

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

up to 100mm 16mm Hard Steel Hard Steel

38mm-70mm 16mm Steel Hard Steel



up to 40mm 11mm Hard Steel Hard Steel

up to 40mm 9.5mm Steel Hard Steel

up to 40mm 9.5mm Steel Hard Steel

●

●

●

●

Black

Black

Black

Grey Other

Padbars

H a s p s a n d S t a p l e s

Hasps & Staples

7B0207B01870077009

710071557195

Key Re-Retention Keyable

Conquest

7B020 Page

P13 7B018 Page

P13 7007 Page

P13

7009 Page

P13

Hasps & Staples

7100 Page

P14 7155 Page

P14 7195 Page

P14

Prot

ecte

d Se

ctio

n

Prot

ecte

d

Sect

ion

Dri

ll Re

sist

ant

Saw

Re

sist

ant

Forc

e Re

sist

ant

Pick

Re

sist

ant

Torq

ue

Resi

stan

t

Tam

per

Resi

stan

t

Key

Cont

rol

Corr

osio

n

Resi

stan

t

Gua

rant

ee

Security Features


P13

7009

• A high grade malleable iron padbar with a hardened steel staple.

• Secured with high tensile clutch head screws fixed through heavy duty steel thrust plates to resist unauthorised removal.

• Horizontal or vertical fitting.

• For use with padlocks up to 16mm diameter shackle.

7B018

7B020 7B018

70097007

Padbars

Padbars

7B020

26mm 32mm14mm

16mm

• A durable padbar with a hardened steel staple that bolts directly to the door.

• Horizontal fitting.


7007

CHUBB

CHUBB

87mm

52mm6mm 16mm

65mm

240mm 80mm

CHUBB

CHUBB

184mm 87mm

52mm16mm

6mm

80mm57mm

• An extra high security heavy duty padbar designed to complement the Conquest range of padlocks.

• Manufactured from an energy absorbent elastomeric polymer core and a special case hardened design which will minimise drill penetration.

• Rotating shackle design accommodates both vertical and horizontal shackle padlocks and prevents torque attack on padlock.


227mm16mm

101mm

• A durable padbar with a hardened steel staple that bolts directly to the door.

• Vertical fitting.


146mm 129mm

80mm

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Security Features

N/A

●

●

●

N/A

●

●

●

N/A

10

N/A

●

●

N/A

●

●

N/A

10

N/A

●

●

N/A

●

N/A

10

N/A

●

●

N/A

●

N/A

10

SawResistant

ForceResistant

PickResistant

TorqueResistant

TamperResistant

CorrosionResistant

Key Control

Guarantee


Key Retention

Re-Keyable

Specification

Door Thickness

Shackle Diameter

Hasp Material

Staple Material

Finishes

Grey

Other

ProtectedSection

DrillResistant

7B020 7B018 7007 7009

up to 38mm- 38mm- 38mm-100mm 70mm 70mm 70mm

16mm 16mm 16mm 16mm

● ● ● ●

Steel Steel SteelHardSteel

Hard Hard Hard HardSteel Steel Steel Steel


P14

HA

RDENED

• A medium duty security hasp.

• Hardened steel straight bar construction.

• Suitable for left or right hand doors.


• A general purpose single hinge hasp.

• Fits around corners or angles or can be used on double doors.


• For use with padlocks up to 9.5mm diameter shackle.

• A general purpose double hinge hasp.

• Fits around corners or angles or can be used on double doors.


• For use with padlocks up to 9.5mm diameter shackle.

7100

7155

71957155

7100

Hasps and Staples

Hasps and Staples

HA

RDENED

7195

200mm

44mm

9mm32mm

HA

RDENED

112mm 77mm

43mm

10mm40mm

46mm

162mm

44mm

9mm32mm

N/A

N/A

N/A

N/A

N/A

N/A

Security Features

N/A

●

●

N/A

●

N/A

5

N/A

N/A

●

N/A

5

N/A

N/A

●

N/A

5

SawResistant

ForceResistant

PickResistant

TorqueResistant

TamperResistant

CorrosionResistant

Key Control

Guarantee


Key Retention

Re-Keyable

Specification

Door Thickness

Shackle Diameter

Hasp Material

Staple Material

Finishes

Grey

Other

ProtectedSection

DrillResistant

up to up to up to40mm 40mm 40mm

11mm 9.5mm 9.5mm

Black Black Black

Steel SteelHardSteel

Hard Hard HardSteel Steel Steel

7100 7155 7195


S e c o n d a r y S e c u r i t y

Se

co

nd

ar

yS

ec

ur

ity

W i n d o w S e c u r i t y

• L o c k s f o r

H i n g e d W i n d o w s

• L o c k s f o r

S l i d i n g S a s h W i n d o w s

D o o r S e c u r i t y

• S e c u r i t y F i t t i n g s

f o r H i n g e d D o o r s

• S e c u r i t y F i i t t i n g s

f o r S l i d i n g D o o r s

SS2

Throughout the catalogue you will see a column headed.

The information shown under this heading can help you identify which products can be Keyed Alike orMasterkeyed.Many products in the Chubb Secondary Security Range have the same keying mechanism and so can beconveniently operated from a single key. Locks offering this option will either have a universal key operation ORa group code reference which matches it to otherproducts in the same group - eg. the 8K13 is a uniquekey in key control group F, so it could be keyed alike toany other product in group F, like the 8K114.

For the complete list of Chubb product keying groups,see the chart in the introduction section.


1

2

3

4


5

6

8

9

10

11

12












7

Security FeaturesIntroduct ion

Keys

How to Specify

Keying Groups

SecondarySecurity Index

S e c o n d a r y S e c u r i t y

• Introduction

Window Security

• Window Types


• Photo Gallery

• Range Table

• Locks for Hinged Windows

• Locks for Sliding Windows

Door Security

• Door Types


• Photo Gallery

• Range Table

Security for Hinged Doors

• Door Bolts

• Door Viewers

• Door Chains

• Hinge Bolts

Security for Sliding Doors

• Notes

SS2

SS3

SS3

SS4

SS5

SS6 - 9

SS10 -11

SS11

SS11

SS12

SS13

SS14

SS15

SS16

SS16

SS17 -18

SS19

Chubb have a very comprehensive range of highquality secondary security products to improve thesecurity on doors and windows.

Locks are available to suit wooden, metal andplastic windows that help to secure hinged orsliding window types.

Additional security fittings for all types of doors areavailable in the Chubb range. Bolts, viewers andchains are designed to fit standard hinged doorsand locks are available to secure aluminium andwooden sliding patio doors.

Chubb is accredited with and meetsthe requirements of BSEN9001


From today you can specifically detail yourrequirements for a product, therefore ensuring thatit includes particular security features. These willgive confidence when specifying and ensure thatthe right products are used on the right application.

Example: If you require a door lock that is TamperResistant look for the screwdriver icon (7) in therange table.


Key Control

Products are available with orwithout keys.See the price list for details.

Trade and Mult i Pack Options

Various pack sizes and formats are available, see theprice list for details.


▼


Additional Security: On windows larger than 0.5 metre sq. it is recommended that 2 locks are fitted to help against a force attack

Tamper ResistantConcealed fixings.

Key ControlIt is possible to make locks inthe same keying group workfrom the same key.


Window Types

Finishes: Brass White Brown

Fitting Aids

Many products aresupplied with Ease ofFitting in mind and aresupplied with fitting aidsas standard.

Drill Bit

To help makesure your lockfixings aresecure thecorrect size bitis pre-packed.

Ventilation Position

Some locks allow the window tobe locked both in the closed andin a slightly open positionallowing ventilation.

Narrow Frame

Many Chubblocks have a bodyof 20mm or lessand are thereforesuitable for anarrow frame

Universal key means there is onestandard key that works the lock. Unique Key means that variations ofthe key shape provide a differentnumber of keys to the lock.

Universal or Unique Key

HingedCasementWindows

Sliding SashWindows

Materials

T Timber

M Metal

P PVCu

Wedge

For tapered frames awedge is supplied tosquare up the lock tothe window section.

SS3


8001 Page

SS6

Locks for Hinged Windows

8K100 Page

SS6 8K101 Page

SS6 8K102 Page

SS7 8K109 Page

SS7 8K113 Page

SS7

8K118 Page

SS8


8K120 Page

SS8 8012 Page

SS8 8K106 Page

SS9 8K123 Page

SS9

8013 Page

SS9

Locks for S l iding Sash Windows

8K104 Page

SS9 8K108Page

SS10 8K114 WS1

SS4

Page

SS10Page

SS10

Window Suited toMaterial Narrow Frame

Universal/ Locking Method Locks Existing Ventilation Fitting AidsUnique Key Key Manual Automatic Fastener Position Supplied

Window SpecificationFeatures/Functions

Security Features

Case Finishes

8001 Window Bolt

8K100 Window Lock

8K101 Window Lock

8K102 Window Lock

8K109 Window Lock

8K113 Window Lock

8K118 Window Lock

8K120 Window Lock

8012 Window Lock

8K106 Window Lock

8K123 Window Lock

8013 Window Bolt

8K104 Window Bolt

8K108 Window Lock

8K114 Window Lock

WS1 Ventilation Lock

● E 10

● C 10

● B 10

● 10

● 10

● F 10

B 10

● 10

● C 10

● B 10

● B 10

D 10

● D 10

● 10

● F 10

10

Universal ●

Unique ● ● DB

Universal ●

Universal ● WED

Universal ● WED

Unique ● WED

Universal ●

Universal ● WED

Unique ● ●

Universal ● DB

Universal ● DB

Universal ●

Universal ● DB

Universal ●

Unique ● ●

Universal ● ●

T

TM ●

T ●

T ●

T ●

T ●

T ●

T ●

M ●

M ●

P ●

T ●

T ●

T

T

T

● ●

●

● ● ●

● ● ●

●

●

● ●

● ● ●

●

●

●

●

●

●

●

●

Brass White Brown


Key: Fixings Supplied: WED = Wedge, DB = Drill Bit.

Tam

per

Resi

stan

t

Key

Cont

rol

Gua

rant

ee

Locks for Pivoted Windows

Locks for Sliding Sash Windows

SS5

SS6


• Mortice bolt that fits into thewindow section and is shot intothe frame.


• Lock for surface fixing onto thewindow section. Bolt is thrown intothe fixed frame by turning thecatch, the bolt is then unlockedwith the key.

8K100 Window Lock

• Lock is surface fixed onto thewindow section and is lockedaround the frame fixed staple byuse of the key.

• A clenching action helps to pull thewindow to the frame.

8K101 Window Lock

8001 8K100 8K101

Universal

●

T

Unique

●

●

DB

TM

●

Universal

●

T

●

Security Features

●

E

10

●

C

10

●

B

10

Features/Functions

Universal/Unique Key

Key

Manual

Automatic

Locks Existing Fastener


Fitting Aids Supplied

Window Specification

Window Material

Suited to Narrow Frame

Case Finishes

Brass

White

Brown

●

● ●

●

●

●

8001 Window Bolt

TamperResistant

Key Control

Guarantee

LockingMethod

16 13 41

33 19

70

32

22 20

52

28 20

SS7


• Lock for surface fixing to the fixedframe which is locked onto the lockplate on the window section bypushing the lock barrel.

• Easy to use ‘Push to lock’ system.• Released by key.

Locks for Hinged Windows8K102 Window Lock

• Lock is surface fixed onto thewindow section, locking into thefixed frame by use of the key.

8K109 Window Lock

• Surface fixed lock which locks onan oval locking plate with the turnof the key. Lock is mounted on thefixed frame.

8K113 Window Lock

8K102 8K109 8K113

Universal

●

WED

T

●

Universal

●

WED

T

●

Unique

●

WED

T

●

Security Features

●

10

●

10

●

F

10

Features/Functions


Key

Manual

Automatic





Window Material


Case Finishes

Brass

White

Brown

●

●

●

● ●

TamperResistant

Key Control

Guarantee

LockingMethod

38

27 20

36

21 18

41

21 25

41

SS8


• Lock is surface fixed onto thewindow section and is locked intothe striking plate on the fixedframe by use of the key.

• Simple and cost effective.

Locks for Hinged Windows8K118 Window Lock

• Lock is surface fitted to the fixedframe and is automatically lockedon closing the window. Thewindow and locking plate arereleased by use of the key.

8K120 Window Lock

• A surface fitted lock for securing awindow handle cockspur fastener.The lock slides into position torestrict the handle movement andis released by use of the key.

8012 Window Lock

8K118 8K120 8012

Universal

●

T

●

Universal

●

WED

T

●

Unique

●

●

M

●

Security Features

B

10

●

10

●

C

10

Features/Functions


Key

Manual

Automatic





Window Material


Case Finishes

Brass

White

Brown

●

●

●

●

●

●

TamperResistant

Key Control

Guarantee

LockingMethod

38

27 20

119

19 14

17

42

21

43

1516

SS9


• Lock is surface fixed onto thewindow section and is lockedaround the frame fixed staple byuse of the key.

• For use on metal windows only.


Locks for S l iding Sash Windows

8K106 Window Lock

• Lock for surface fixing onto thewindow section which is lockedaround the frame fixed staple byuse of the key.

• For use on PVCu windows only.

• The threaded lock barrel is fixed into the inner frame and thewindow is secured by locking the inner bolt into the barrel andframe using the key.

• Can also be used in hinged windows.• Screw in fitting barrel.

• The tap in fitting lock barrel is fixed into the inner frame and thewindow is secured by locking the inner bolt into the barrel andframe using the key.

• Can also be used in hinged windows.• Tap in fitting barrel and keep.

8K106 8K123 8013 8K104

Universal

●

DB

M

●

Universal

●

DB

P

●

Universal

●

T

●

Universal

●

DB

T

●

Security Features

●

B

10

●

B

10

D

10

●

D

10

Features/Functions


Key

Manual

Automatic





Window Material


Case Finishes

Brass

White

Brown

● ●

● ●

TamperResistant

Key Control

Guarantee

LockingMethod

8013 Window Bolt 8K104 Window Bolt

8K123 Window Lock

52 42

28 32

61 53

49 37

35

19

64

5.5

1364

105.511

SS10


Locks for S l iding Sash Windows8K108 Window Lock

• Lock is surface fixed accross thewindow sections and the case islocked to the lock plate using thekey.

• Lock is surface fitted and securedby a locking bar which locks bothwindow sections in place. The bar issecured and released by the key.

• Handy storage for locking barwhen not in use.

• One way security screws.

8K114 Window Lock

• A key operated bolt is morticedinto the outer window framewhich when locked out willprevent the inner window fromopening.

WS1 Ventilation Lock

8K108 8K114 WS1

Universal

●

T

Unique

●

●

T

Universal

●

●

T

Security Features

●

10

●

F

10 10

Features/Functions


Key

Manual

Automatic





Window Material


Case Finishes

Brass

White

Brown

● ●

●

TamperResistant

Key Control

Guarantee

LockingMethod

42

24 24

74

109 26

23

21 25

48

29

4819

45

SS11

Fitting Aids

Many products aresupplied with Ease ofFitting in mind and aresupplied with fitting aidsas standard

Drill Bit

To help makesure your lockfixings aresecure thecorrect size bitis pre-packed


Finishes:

What Type of Door ?

• A comprehensiverange of securitydevices forboth,exterior andinterior glasspanelled or soliddoors.

• Sliding Patio Doors

▼


Brass Satin Chrome White Brown

Additional Security: Where mortice bolts and/or hinge bolts are used, 2 per door are recommended to help against a force attack.

Some products have amethod of showingwhether the lock is inthe locked orunlocked position.

Unlocked Indicator

Universal key means there is onestandard key that works the lock.Unique Key means that variationsof the key shape provide a differentnumber of keys to the lock.

Universal or Unique Key

Angle of Vision

All door viewers have a viewing area inwhich to see movement. This is measuredin degrees. Saw Resistant

Hardened pin in bolt for sawingprotection.

Drill ResistantMetal sleeve for drill protection.

Tamper ResistantConcealed fixings.

Key ControlIt is possible to make locks inthe same keying group, workfrom the same key.

GuaranteeGuarantee period applicablewhen used with original Chubbkeys and maintananceinstructions followed.

Door Types

T Timber

M Metal

P PVCu

T

M

T

P

Angle ofVision

SS12


8002 Page

SS14


8004 8006 8K117 8V001 WS8

WS9


WS13 WS6 WS16 WS12 WS14

8K107 Page

SS17Page

SS17Page

SS17

Security for S l iding Doors

8K119 8K116 8K122 Page

SS18

Page

SS14Page

SS15Page

SS15Page

SS15Page

SS14

Page

SS15Page

SS16Page

SS16Page

SS16Page

SS16Page

SS15

Brass

Security Features

Dri

ll Re

sist

ant

Saw

Re

sist

ant

Tam

per

Resi

stan

t

Key

Cont

rol

Gua

rant

ee

8002 Security Door Bolt

8004 Economy Door Bolt

8006 High Security Door Bolt

8K117 Door Bolt Upgrade Cylinder

8V001 Door Viewer

WS8 Door Viewer

WS9 Door Viewer

WS13 Door Viewer

WS6 Door Chain

WS16 Door Chain and Bolt

WS12 Security Hinge Bolt

WS14 Security Hinge Bolt

8K107 Sliding Door Lock

8K119 Sliding Door Indicator Lock

8K116 Multi Purpose Door Bolt

8K122 Anti-Lift Device

Universal/ Approx. Angle Locking Method Extended Key Fitting Aids OtherUnique Key of Vision Key Manual Option Supplied Features

Door DoorMaterial Thickness mm

Door SpecificationFeatures / Functions Finish Options

● E 10

● E 10

● ● ● E 10

F 10

10

10

10

10

10

10

● 10

● 10

● KA 10

● F 10

● F 10

● 10

Univ ● ●

Univ ● ●

Univ ● ●

Uniq ●

170˚

130˚

170˚

130˚

●

●

Uniq ● DB

Uniq ● UI

Uniq ● DB OS

T

T

T

T

M,T,P 27 to 57

M,T,P 25 to 57

M,T,P 40 to 95

M,T,P 35 to 57

T

T

T

T

M

M

M,T

M,P

● White

● White

● White

● White

● ●

● ●

● ●

● ●

● ●

●

●

●

● White

●

White

Chrome Other

WhiteBrown

Security for S l iding Doors


Key: Fittings Supplied: DB = Drill Bit Other Features: OS = One way Screws UI = Unlocked Indicator


Silver

SS13

SS14


• Mortice fixing with bolt throwing into the frame.• Lock is invisible from outside of door.

Secur ity for Hinged Doors 8002 8004 8006

Door Specification

●

E

10

●

E

10

●

●

●

E

10

Brass ● ● ●

Chrome

Other White White White

Door Material T T T

Door Thickness (mm)

Universal/Unique Key Univ Univ Univ

Approx. Angle of Vision

Key ● ● ●

Manual

Extended Key Option ● ● ●


Other Features

Finish Options


Security Features8002 Security Door Bolt

• Mortice fixing with bolt throwing into the door frame.• Lock is invisible from the outside of door.• Cost effective plastic body.

8004 Economy Door Bolt

• As the 8002 with additional Security.• Hardened bolt giving added sawing protection.• Metal sleeve around key mechanism giving added

drilling protection.

8006 High Security Door Bolt

Key Control

Guarantee

DrillResistant

SawResistant

TamperResistant

LockingMethod

16 13 41

61 19

16 13 41

61 19

16 13 41

61 19

SS15


• Provides a security upgrade from a universal key toa unique key mechanism for a mortice door bolt.

Secur ity for Hinged Doors8K117 Door Bolt upgrade Cylinder

• Adjustable to suit various door thicknesses.

WS8 Door Viewer8V001 Door Viewer

WS9 Door Viewer WS13 Door Viewer




8K117 8V001 WS8 WS9 WS13

Door Specification

F

10 10 10 10 10

Brass ● ● ● ● ●

Chrome ● ● ● ●

Other White

Door Material T M,T,P M,T,P M,T,P M,T,P

Door Thickness (mm) 27 to 57 25 to 57 40 to 95 35 to 57

Universal/Unique Key Unique

Approx. Angle of Vision 170˚ 130˚ 170˚ 130˚

●

Extended Key Option


Other Features

Finish Options


Security Features

Key Control

Guarantee

DrillResistant

SawResistant

TamperResistant

LockingMethod

Key

Manual

33 31

60

27 - 57 17

12

25 - 57 15

12

40 - 95 30

27

35 - 57 15

12

SS16


• Simple to install and easy to use.• Helps to hold the door in the slightly open

position, restraining against a force attack.• Helps you to identify a caller before the

door is fully released.

Secur ity for Hinged DoorsWS6 Door Chain

• Integral steel dead bolt for additional security.• Heavy Duty Chain helps protect against

cropping attack.• Safe caller identification.• Angled fixing screws help door restraint

against a force attack.• Handy chain holder supplied as

standard.

WS16 Combined Door Chain and Bolt

• Hinge bolts help keep the door in the frame on thehinged side aiding protection against a force attack.

• Recommended for use in outward opening doors.

• Hinge bolts help keep the door in the frame on thehinged side aiding protection against a force attack.

• Recommended for use in outward opening doors.

WS12 Hinge Bolts

WS6 WS16 WS12 WS14

Door Specification

10 10

●

10

●

10

Brass ● ●

Chrome ● ●

Other Satin

Door Material T T T T

Door Thickness (mm)



● ●

Extended Key Option


Other Features

Finish Options


Security Features

Key Control

Guarantee

DrillResistant

SawResistant

TamperResistant

LockingMethod

Key

Manual

WhiteBrown

57

48

13

38

50

78

50

26

70

44

19

25

56

38 13

24

WS14 Hinge Bolts

60

SS17


• Suitable for securing single or double aluminium sliding doors.• Simple push to lock action.• A key differing mechanism releases the lock (8K107 has 2000

key variations).• 8K107 features Tap-tite screws.

• Suitable for securing single or double aluminium sliding doors.• Simple push to lock action.• A key differing mechanism releases the lock.

Secur ity for S l iding Doors8K107 Sliding Door Lock

• Suitable for securing single or double aluminium sliding doors by means of the steel locking bar.

• Also suitable for hinged doors. • Simple push to lock action.• A key differing mechanism releases the bar from the frame.• Screws suitable for timber or metal doors supplied as standard.

8K119 Indicator Lock

8K116 Multi Purpose Door Bolt

8K107 8K119 8K116

Door Specification

KA

10

F

10

●

F

10

Brass

Chrome ● ●

Other White

Door Material M M M,T

Door Thickness (mm)

Universal/Unique Key Unique Unique Unique


●

● ● ●

Extended Key Option

Fitting Aids Supplied DB

Other Features UI OS

Finish Options


Security Features

Key Control

Guarantee

DrillResistant

SawResistant

TamperResistant

LockingMethod

Key

Manual

WhiteBrown

28

30

22

30

36

30

52

8

10

41

30

26

144

30

82

69

25

18

23

SS18


Security for S l iding Doors8K122 Anti-Lift Device

8K122

Door Specification

●

10

Brass

Chrome

Other

Door Material M,P

Door Thickness (mm)



Extended Key Option


Other Features

Finish Options


Security Features

Key Control

Guarantee

DrillResistant

SawResistant

TamperResistant

LockingMethod

Key

Manual

White

• Helps to prevent sliding patio doors from being lifted out of theirframes.

• Easy to install.

• Variable thickness feature to enable fitting in most applications.

77

20

10

55

15

• For applications where extended key lengths would be useful packs of extra long keys are available, see the price list for details.

Extra Length Keys

• Many locks in the Chubb range have interchangeable keys andso can be conveniently operated from a single key. Locksoffering this option will have either a universal key operationOR a key alike reference which matches it to other products inthe same group; eg. the 8K113 is a unique key, in key alikegroup F, so it could be keyed alike to any other product in groupF, like the 8K114.

• For the complete list of Chubb product keying groups, see thechart in the introduction section.

Keying Groups

Variat ions

Ac

ce

ss

Co

nt

ro

l

A c c e s s C o n t r o l

Ac

ce

ss

Co

nt

ro

l

• M o t o r i s e d L o c k s

• S o l e n o i d L o c k s

• E l e c t r o n i c S t r i k e s

• M a g n e t i c L o c k s

• R e a d e r s

• A c c e s s o r i e s

AC2


1

2

3

4


5

6

8

9

10

11

12












7



Access Control Index

• Introduction

• Motorised LocksFeatures and FunctionsPhoto GalleryRange TableMotorised LocksControl Unit

• Solenoid LocksFeatures and FunctionsPhoto Gallery & Range TableSolenoid Locks

• Electric StrikesFeatures and FunctionsPhoto Gallery & Range TableMortice StrikesRim Strikes

• Magnetic LocksFeatures and FunctionsPhoto GalleryRange TableSurface Mounted LocksFlush Mounted locksBrackets

• ReadersFeatures and FunctionsPhoto GalleryRange TableKeypadsCard ReadersProximity ReadersReader Cards

• AccessoriesDoor LoopPower SupplyRelease Button

• Notes

AC2

AC3AC4AC5AC6AC6

AC7AC8AC9

AC10AC11AC12AC12

AC13AC14AC15

AC16-17AC17AC18

AC19AC20AC21AC22AC23AC23AC24

AC25

AC26-27

Chubb offers a very comprehensive range of AccessControl products. They cover readers and locks,which together open up many options forelectronically controlling peoples access.Keypads, Cardswipes and Proximity readers offermethods of entry control which require people topunch in an access code, swipe a reader card oroffer up a proximity card or tag.The locks are available as motorised and solenoidvariants that automatically withdraw the bolt.Electronic strikes which allow the release of amortice or rim locks’ bolt from the frame. Magnetic force that use magnetic force to lock thedoor.



From today you can specifically detail yourrequirements for a product, therefore ensuring thatit meets a particular standard or approval.

In addition you can now ask for specific securityfeatures to be included in the product you specify.

Example: If you require a keypad reader that hastamper resistance look for the screw driver icon(number 7) in the range.



The application of the CE mark is currentlyrestricted to products covered by the lowvoltage and EMC Directives.

Magnetic Locks Readers Accessories

Motorised Locks Solenoid Locks Electric Strikes

A c c e s s C o n t r o l - M o t o r i s e d L o c k s

▼


Ideal for Use with: Keypad / Cardswipe / Proximity Readers.

Corrosion Resistant Successfully completed a 96hour salt spray test.

What Type of Door ?

• A comprehensive range of locks for both exterior and interior solid timber doors.

• Can be used with outward opening doors.

• This is the measurementfrom the edge of thedoor to the centre of thekeyhole.

Edgeof doorBackset

Finish: Chrome Plated

Control Output

The locks are permanentlycontrolled by the control unitwhich supplies the open andclose commands.

Monitored Bolt

The bolt position ismonitored to allow thecontrol unit to identifythe lock status.

Key Overide

At any time the bolt canbe withdrawn or thrownby a key when a Europrofile cylinder is fittedto the lock.

Auto Re-Lock

If the door is in the closedposition and has notbeen opened after anopen command the boltwill automatically re-lock.

Alignment Locator

To make sure the bolt isalways thrown into thestrike, a specialalignment locator isfitted to the lockfaceplate and the strike.

RTE Input

A Request To Exit switchcan be connected to thecontroller.

Anti-Side Load

This feature prevents pressureapplied to the door beingtransferred to the boltcreating excess friction.

Bolt Options

Deadbolt

Swingbolt

DB

SB

GuaranteeGuarantee period applicablewhen used with original ChubbCylinders and maintenanceinstructions followed.

Input Voltage

All chubb motorised locks operateon a 12Vdc power supply.

Any loss of electrical powerwill leave the lock in one oftwo modes:

Fail LockedDoor remains locked untilpower is applied.

Fail Unlocked Door remains unlockeduntil power is applied.

Power Failure Mode

What i s Backset?

FL

FU

ASL

AC3

Door Types

T Solid Timber

M Metal

P PVCu

Products carrying the CE markcomply to the requirements

of the CE regulations.T


CMLS1 Page

AC6

CMLC1

CPS5

Motorised Locks

Power Supply

Control Unit

CMLD1 Page

AC6

Page

AC6

Page

AC25

AC4

Bolt Throw Input Output Lock/Strike Automatic Key Monitored Power Othermm Volatge Voltage Peak Holding Alignment Re-Locking Overide Bolt Failure Mode Features

Case Case Face Plate BacksetDepth Width Width

Door Features

Door Features



Standards Finish Options

●

●

●

●

● 5

● 5

5

1

40 12Vdc 4A n/a ● 1 Sec. ● ● FL

30 12Vdc 4A n/a ● 1 Sec. ● ● FL ASL

N/A 12Vdc 12Vdc 4A 80mA ● ● ACCS ● BBF ●

N/A 240Vac 12Vdc BBF 5A

32mm 29mm 30mm 20mm

82mm 25mm 30mm 50mm

55mm 125mm 85mm

80mm 330mm 330mm

●

●

●

●

White ChromeA c c e s s C o n t r o l

Motorised Locks

Security Features

CMLS1 Mortice Swing Bolt

CMLD1 Mortice Dead Bolt

CMLC1 Single Door Unit

CPS5 Power Supply

Control Units

Power Supply

Current Consumption

Bolt Throw Input Output Open Signal Open Close Fault Other RTEmm Voltage Voltage Peak Holding Input Command Command Signal Features Input

Output Output Output

Current Consumption


Bolt Throw Input Output Other Currentmm Voltage Voltage Features Ouput

Corr

osio

n

Resi

stan

t

Gua

rant

ee

Key: ASL = Anti -Side Load ACCS = Automatic Continuous Close Signal BBF = Battery Backup Function FL = Fail Locked

Case Case Case Depth Width Height

AC5


• For use on single doors where bolt release is to beelectronically controlled.

• Must be used with the controller unit.

Motorised Locks

Control Unit

CMLS1 Mortice Swing Bolt CMLD1 Mortice Dead Bolt

• Used for controlling the Motorised Locks.• Option to run off of battery back-up in case of power failure• Connection to Access Control Reader device available such as

a keypad for external operation.• Automatic Continuous Close Signal sent to the lock, and close

signal sent after 8 seconds if the open command is sent butthe door is not opened.

• Connection to request to exit button available for internaloperation.

• Emergency status output.• For connection to an external alarm device (eg a sounder).

CMLC1 Single Door Unit

• For use on single doors where bolt release is tobe electronically controlled.

• Must be used with the controller unit.

White

Chrome

CMLS1 CMLD1 CMLC1

Standards

Security Features

● ● ●

● ●

Features/Functions

Bolt Throw (mm)

Input Voltage

Output Voltage

Peak

Holding

Lock/Strike Alignment

Automatic Re-locking

Key Overide

Monitored Bolt

Power Failure Mode

Open Signal Input

Open Command Output

Close Command Output

Fault Signal Output

Other Features

RTE Output

Door Features

Case Depth (mm)

Case Width(mm)

Face Plate Width (mm)

Backset (mm)

40

12Vdc

12Vdc

4A

n/a

●

1 Sec.

●

●

FL

n/a

n/a

n/a

n/a

n/a

32

29

30

20

●

30

12Vdc

12Vdc

4A

n/a

●

1 Sec.

●

●

FL

n/a

n/a

n/a

n/a

ASL

n/a

82

25

30

50

●

n/a

12Vdc

12Vdc

4A

1

n/a

n/a

n/a

n/a

n/a

●

●

ACCS

●

BBF

●

55

125

●

Guarantee

CorrosionResistant

Current Consumption

5 5 5

Finish OptionsChrome

29mm

216mm129mm

14mm

236.5mm

151mm

111mm

129mm

440mm

66mm17mm

75mm

35mm

40mm

3mm30mm

29mm

3mm82mm

440mm

232mm

82mm

49mm3mm

30mm

140

30mm

17mm

111mm

30mm

12mm

70mm

30mm

50mm

AC6

125mm 55mm

85mm

A c c e s s C o n t r o l - S o l e n o i d L o c k s

▼


Ideal for Use with: Keypad / Cardswipe / Proximity Readers.

Escape The fail Unlocked version of thislock is ideal for use on escapedoors if used with a microswitched panic bar.

Corrosion Resistant Successfully completed a 96hour salt spray test.


and interior doors.

• Variants available for outward opening doors.

GP = Glass Panelled M = P = PVCu T = Timber

What i s Backset?

• This is the measurementfrom the edge of thedoor to the centre of thekeyhole.

Edgeof doorBackset

Finish: Chrome

Monitored Bolt

The bolt position is monitoredto allow the control unit toidentify the lock status.

Key Overide

At any time the bolt canbe withdrawn or thrownby a key when a Europrofile cylinder is fittedto the lock.

Auto Re-Lock

If the door is in the closedposition and has not beenopened after an opencommand the bolt willautomatically re-lock.

RTE Input

A Request To Exit switchcan be connected to thecontroller.

Door Status

Built in Magnetic contactsenses the door open / closedstatus for bolt re-locking.

Bolt Options

Deadbolt

Latchbolt

DB

LB

GuaranteeGuarantee period applicablewhen used with original ChubbCylinders and maintenanceinstructions followed.

Input Voltage

All Chubb soleniod bolts operateon a 12Vdc power supply.

Any loss of electrical powerwill leave the lock in one oftwo modes:

Fail LockedDoor remains locked untilpower is applied.

Fail UnlockedDoor remains unlockeduntil power is applied.

Power Failure Mode

Power Rating

The lock is continuously ratedallowing the lock to be held inthe constantly open position.

FL

FU

AC7

Door Types

T Solid Timber

M Metal

P PVCu


of the CE regulations.

T M P

Input Output Other CurrentVolatge Voltage Features Output


Door FeaturesFeatures / FunctionsStandards FinishOptions

White

Security Features

osio

n

Resi

stan

t

Gua

rant

ee

Solenoid Bolts


Bolt RTE Input Power Open Automatic Key Monitored Power OtherThrow Input Voltage Peak Holding Rating Signal Re-Locking Overide Bolt Failure Features(mm) Input Mode

Case Case Face Plate BacksetDepth Width Width

Door FeaturesFeatures / FunctionsStandardsFinish

Options

●

●

●

● 1

● ● 1

● 1

22 ● 12/24Vdc 3A/1.8A 250mA C ● 1 Sec. ● ● FL

22 ● 12/24Vdc 3A/1.8A 250mA C ● 1 Sec. ● ● FU

16.5 ● 12/24Vdc 3A/1.8A 250mA C ● 6 Sec. ● ● FL

35mm 22mm 25mm 25mm

35mm 22mm 25mm 25mm

35mm 22mm 25mm 25mm

●

●

●

ChromeA c c e s s C o n t r o l

Solenoid Locks

Security Features

CSDB100 Mort. Solenoid D/Bolt

CSDB100U Mort. Solenoid D/Bolt

CSLB200 Mort. Solenoid L/Bolt

CPS3 Power Supply

Current Consumption

Corr

osio

n

Resi

stan

t

Esca

pe

Gua

rant

ee

Power Supply

Page

AC25

Key: FL = Fail Locked FU = Fail Unlocked C = Constant

Key: BBF = Battery Backup Function

● 5 80mm 250mm 215mm ●

Power Supply

CPS3Page

AC9CSDB100 • CSDB100U Page

AC9CSLB200

240Vac 12Vdc BBF 3A

AC8

• For use on a single door where bolt releaseis to be electronically controlled.

• Narrow style lock case.

• Connection to an access control readerdevice , such as a keypad, for externaloperation.

• Connection to a request to exit button forinternal operation.

• CSBD100 - Fail Locked.

• CSBD100U - Fail Unlocked.

• For use on a single door where bolt releaseis to be electronically controlled.

• Narrow style lock case.

• Connection to an access control readerdevice , such as a keypad, for externaloperation.

• Connection to a request to exit button forinternal operation.

• Fail Locked.

Solenoid Locks CSDB100 CSDB100U CSLB200

Standards

Security Features

● ● ●

● ● ●

●

Features/Functions

Bolt Throw (mm)

RTE Input

Input Voltage

Peak

Holding

Power Rating

Open Signal Input

Automatic Re-Locking

Key Overide

Monitored Bolt

Power Failure Mode

Other Features

Door Features

Case Depth (mm)

Case Width(mm)

Face Plate Width (mm)

Backset (mm)

20

●

12/24Vdc

3A/1.8A

250mA

C

●

1 Sec.

●

●

FL

35

22

25

25

●

20

●

12/24Vdc

3A/1.8A

250mA

C

●

1 Sec.

●

●

FU

35

22

25

25

●

18

●

12/24Vdc

3A/1.8A

250mA

C

●

6 Sec.

●

●

FL

35

22

25

25

●

Finish Options

Chrome

CSDB100 • CSDB100U Mortice Solenoid Deadbolt

Guarantee


CorrosionResistant

Escape

Current Consumption

CSLB200 Mortice Solenoid Latch Bolt

1 1 1

160mm21mm

25mm2.5mm

52mm

45mm

320mm

230mm

45mm

25mm

35mm

25mm

35mm

25mm

22mm

22mm

94.6

44.4

160mm21mm

25mm2.5mm

52mm

45mm

320mm

230mm

45mm

25mm

18mm18mm

16.5mm

22mm

94.6

44.4

AC9

▼


IDEAL FOR USE WITH: Mortice Locks, Rim Locks, Keypad / Cardswipe / Proximity Readers

Tamper ResistantWhen the door is locked, allfixings are hidden.

Force ResistantStrong bolt design providesresistance to side load force.

Finishes:

Input Voltage

All Chubb strikes operate on a12Vdc power supply.

Any loss of electrical power willleave the strike in one of twomodes:

Fail LockedDoor remains locked until power isapplied.

Fail UnlockedDoor remains unlocked until poweris applied.

Power Failure Mode

Release Operation

Connection of a reader, suchas a keypad, allows the striketo be released on entry.

Handing

All Chubb strikes arereversible to suit either left orright handed doors.

Power Rating

The strike is continuouslyrated allowing it to be held inthe constantly open position.

A c c e s s C o n t r o l - E l e c t r i c S t r i k e s

What Type of Door ?

Operat ion

• A comprehensive range of strikes for both exterior and interior doors.

• When the strike is released it allows the door to be pushed, forcing the bolt of the strike to open.

Escape The fail Unlocked version of thisstrike is ideal for use on escapedoors if used with a microswitched panic bar.

Corrosion Resistant Successfully completed a 96hoursalt spray test.

GuaranteeGuarantee period applicablewhen Chubb maintenanceinstructions are followed.

Dark Metallic Grey Brass

FL

FU

Holding Force

A measurement is given (kg)for the amount of sideload anelectric strike will take andhold the door locked.

AC10

Door Types

T Solid Timber

M Metal

P PVCu



T M P

CMES400 • CMES400U Page

AC12

Electr ic Str ikes


Door Features

Features / FunctionsStandards

●

●

●

●

REV

REV

REV

REV

●

●

●

●

●

●

Brass

Finish Options

DMGA c c e s s C o n t r o l

Electr ic Str ikes

Security Features

CMES400 Mort. Electric Strike

CMES400U Mort. Electric Strike

CRES100 Rim Electric Strike

CRES100U Rim Electric Strike

Current Consumption

Corr

osio

n

Resi

stan

t

Tam

per

Resi

stan

t

Forc

e Re

sist

ant

Esca

pe

Gua

rant

ee

Key: FL = Fail Locked FU = Fail Unlocked REV = Reversible Handing C = Constant

Input Power Open Signal Holding Power OtherVoltage Peak Holding Rating Input Force Failure Mode Features

Handing

●

●

●

●

InwardOpening

● ● ● 1

● ● ● ● 1

● ● ● 1

● ● ● ● 1

CRES100 • CRES100U Page

AC12

12/24Vdc 300mA 300mA C ● 400kg FL

12/24Vdc 300mA 300mA C ● 400kg FU

12/24Vdc 300mA 300mA C ● 380kg FL

12/24Vdc 300mA 300mA C ● 380kg FU

AC11

• For use with a mortice latch.

• Continuously rated.

• For inward opening door applications.

• Metal shroud around release latch for tidyinstallation.

• CMES400 - Fail Locked.

• CMES400U - Fail Unlocked.

• For use with a rim nightlatch.

• Continuously rated.

• For inward opening door applications.

• CRES100 - Fail Locked.

• CRES100U - Fail Unlocked.

E lectr ic Mort ice Str ikes

Electr ic Rim Str ikes

CMES400 • CMES400U

CRES100 • CRES100U


CMES400 CMES400U CRES100 CRES100U

Standards

Security Features

● ● ● ●

● ● ● ●

1 1 1 1

Features/Functions

Input Voltage

Peak

Holding

Power Rating

Open Signal Input

Automatic Locking

Side Load ForceResistance

Power Failure Mode

Other Features

Door Features

Handing

Inward Opening

12Vdc

300mA

300mA

C

●

1 Sec

400kg

FL

REV

REV

●

12Vdc

300mA

300mA

C

●

1 Sec

400kg

FU

REV

REV

●

12Vdc

300mA

300mA

C

●

1 Sec

380kg

FL

REV

REV

●

12Vdc

300mA

300mA

C

●

1 Sec

380kg

FU

REV

REV

●

Finishes

DMG

Brass

Guarantee

ForceResistant

● ● ● ●Tamper

Resistant

● ● ● ●CorrosionResistant

● ●Escape

Current Consumption

30 mm

28 mm10 mm

150 mm69 mm

16 mm

30 mm

47 mm63 mm

31 mm28 mm

106 mm80 mm

104 mm40 mm

AC12

▼


IDEAL FOR USE WITH: Keypad / Cardswipe / Proximity Readers

Door Types

Instal lat ion Options

Finishes: Satin Silver Anodised

Input Voltage

Single voltage units accept a12Vdc power supply.

Dual voltage units accept eithera 12Vdc or 24Vdc power supply.

Magnets are available in two states:

MonitoredA 2 wire output from a 24v, 1amp volt free changeover contact allows a signal to be sent to a relay orcontrol device to show that the magnet is in thefully locked or unlocked state (hall effect).

UnmonitoredNo signal is available to show the status of magnet.

Monitoring

Fixing Brackets

A range of brackets andaccessories are availableto suit most applications.

Holding Force

A measurement is given (in kgs)for the amount of direct force amagnetic lock will take and holdthe door locked.

Surface MountMagnet is fixed to the doortransom.

Flush MountMagnet is morticed into thedoor and frame or transom.

Fixing Types

M

U

Corrosion Resistant Successfully completed a 96hrsalt spray test.

A c c e s s C o n t r o l - M a g n e t i c L o c k s

Z & L Brackets forinward openingapplications.

Adjustable TransomBracket for applicationswith a narrow frame orno frame reveal.

Any loss of electrical powerwill leave the magnet in thefail unlocked state.

Power Failure Mode

GuaranteeGuarantee period applicablewhen Chubb maintenanceinstructions are followed.

Escape The Magnetic Locks are ideal foruse on escape doors if used witha micro switched panic bar.

Single Door

Double Door

Single Door with FullWidth Housing

Frame 100mm wide

Outward Opening Outward Opening

Outward Opening Inward Opening

Door

Frame 75mm wide

Door

Frame 50mm wide

Adjustabletransombracket

Door

Frame

DoorZ bracket

AC13



CM1SSU • CM1SSM Page

AC16

Magnetic Locks - Surface Mounted

CM1DSU • CM1DSM

CM2SSU-1M • CM2SSM-1M

Magnetic Locks - Surface Mounted Shear Locks - F lush Mounted

CM3SSU • CM3SSM CM4SSM • CM4SFM


Page

AC16Page

AC17

Page

AC16

Page

AC17

Page

AC17

CM2DSU-2M • CM2DSM-2M

AC14


Holding Monitoring Type Input Voltage Current Consumption (Per Coil) PowerForce (kg) Failure Mode

Fixing Type Case Case CaseSurface Flush Length Height

Door FeaturesFeatures / FunctionsStandardsFinish

Options

●

●

●

●

●

●

●

●

●

●

●

●

● ● 5

● ● 5

● ● 5

● ● 5

● ● 5

● ● 5

● ● 5

● ● 5

● ● 5

● ● 5

● ● 5

● ● 5

Up to 310 ● 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU












● 280mm 33mm 44mm

● 280mm 33mm 44mm

● 540mm 33mm 44mm

● 540mm 33mm 44mm

● 1000mm 33mm 44mm

● 2000mm 33mm 44mm

● 2000mm 33mm 44mm

● 2000mm 33mm 44mm

● 267mm 73mm 40mm

● 267mm 73mm 40mm

● 180mm 30mm 25mm

● 180mm 30mm 25mm

●

●

●

●

●

●

●

●

●

●

●

●

SatinSilver

Anodised


Magnetic Locks

Security Features

CM1SSU1M Single Magnet

CM1SSM Single Magnet

CM1DSU2M Double Magnet

CM1DSM Double Magnet

CM2SSU-1M Single Magnet

CM2SSM-1M Single Magnet

CM2DSU-2M Double Magnet

CM2DSM-2M Double Magnet

CM3SSU Single Magnet

CM3SSM Single Magnet

CM4SSM Single Shear Magnet

CM4SSM Single Shear Magnet

Monitored Unmonitored Peak Holding

Corr

osio

n

Resi

stan

t

Esca

pe

Gua

rant

ee

Key: FU = Fail Unlocked

AC15


CM1DSU • CM1DSM

CM2SSU-1M • CM2SSM-1M

CM1SSU • CM1SSM

• For use on single doors.

• Surface mount (super mini) design.

• Variable cable entry position.

• Suits Inward and outward openingdoors.

• Dual voltage capability.

• CM1SSU - Unmonitored.

• CM1SSM - Monitored.

• For use on double doors.

• Surface mount (super mini) design.

• Variable cable entry position.

• Suits Inward and outward opening doors.

• Dual voltage capability.

• CM1DSU - Unmonitored.

• CM1DSM - Monitored.


• Surface mount (super slim) design.

• 1m housing length for full doorwidth fitting.





CM1SSU/M CM1DSU/M CM2SSU-1M/M

Standards

Security Features

● ● ●

● ● ●

● ● ●

5 5 5

● ● ●

Features/Functions

Hoding Force (kg)

Monitored

Unmonitored

Input Voltage

Peak

Holding

Power Failure Mode

Other Features

Door Features

Surface

Flush

Case Length (mm)

Case Height (mm)

Case Depth (mm)

Up to 310

●

●

12Vdc/24Vdc

250mA/500mA

250mA/500mA

FU

●

280

33

44

Up to 310

●

●

12Vdc/24Vdc

250mA/500mA

250mA/500mA

FU

●

540

33

44

Up to 310

●

●

12Vdc/24Vdc

250mA/500mA

250mA/500mA

FU

●

1000

33

44

Finish Options

Satin Silver Anodised

Guarantee

CorrosionResistant

Escape

MonitoringType

CurrentConsumption(Per Coil)

540

1000

272

12

1212

12

40

40 40

40

44

44

44

33

33

33

44

44

44

AC16


Shear Locks - F lush Mounted

CM3SSU • CM3SSM

CM4SFU • CM4SFM

CM2DSU-2M • CM2DSM-2M

• For use on double doors.

• Surface mount (super slim) design.

• 2m housing length for full doorwidth fitting.


• CM2DSU-2M - Unmonitored.

• CM2DSM-2M - Monitored.


• Surface mount (super power) design.

• Unmonitored.




• For use on single or double doors.

• Flush mount (shear force) design forimproved holding force (1000kg ofshear force).

• Suitable for Inward or outwardopening doors or bi-directional doors.

• Can be fitted in the horizontal orvertical axis.

• CM4SSM - Surface Mount.

• CM4SFM - Flush Mount.


CM2DSU-2M/M CM3SSU/M CM4SSM/FM

Standards

Security Features

● ● ●

● ● ●

● ● ●

5 5 5

● ● ●

Features/Functions

Hoding Force (kg)

Monitored

Unmonitored

Input Voltage

Peak

Holding

Power Failure Mode

Other Features

Door Features

Surface

Flush

Case Length (mm)

Case Height (mm)

Case Depth (mm)

Up to 310

●

●

12Vdc/24Vdc

250mA/500mA

250mA/500mA

FU

●

2000

33

44

Up to 630

●

●

12Vdc/24Vdc

250mA/500mA

250mA/500mA

FU

●

267

73

40

Up to 1000

●

12Vdc/24Vdc

900mA/1200mA

900mA/1200mA

FU

CM4SSM

CM4SFM

163

30

25

Finish Options

Satin Silver Anodised

Guarantee

CorrosionResistant

Escape

MonitoringType

CurrentConsumption(Per Coil)

2000

44

4040

44

12 12

33

267

73 73

40

63

12

163mm

163mm

30mm

30mm

25mm

25mm

AC17

Magnetic Lock Brackets & Accessor ies

• Suitable for use on inward opening doors.

• CZB1 - For use with CM1 and CM2 magnets.

• CZB3 - For use with CM3 magnets.

• CLB1 - For use with CM1 and CM2 magnets.

• CLB3 - For use with CM3 magnets.


• Bracket allows adjustable positioning of the magnet.

• Suitable for applications witha flush door and a framewith little or no reveal.

• Adhesive for glass mounting.

(CMADHESIVE)

(CMACTIVATOR)

Adjustable Transom Bracket Accessories

Z and L Brackets

A

A

A

C

C

C

D

B

B

B

Z Bracket A B C D

CZB1 190mm 50mm 50mm 100mm

CZB3 190mm 75mm 75mm 150mm

L Bracket A B C

CLB1 250mm 50mm 38mm

CLB3 266mm 75mm 38mm

Adjustable Transom Bracket A B C

CADJTB for CM1, 2+3 266mm 50mm 38mm

AC18

▼IDEAL FOR USE WITH: Motorised Locks, Solenoid Locks, Electric Strikes, Magnetic Strikes.

Tamper ResistantSecurity screws and anti-tamperswitches help secure the units.

Corrosion ResistantSuccessfully completed testingto ISP53 weather protection.

GuaranteeGuarantee period applicablewhen used with original Chubbcards, tags and maintenanceinstructions followed.

Finishes:

Input Voltage

All chubb Readers operateon a 12Vdc power supply.

Programming the readers isachieved via the keypad or with useof the program card.

Programming Method

Non Volatile Memory

This means the programmedinformation in the reader isretained in the event ofpower loss.

Products carrying the CE markcomply to the requirements of

the CE regulations.

Number of Users

Each system has a limitof programmablecodes for users.

RTE Input

Connection of aRequest to Exit switchwill allow for instantegress operationwithout the use of acard, code or tag.

Alarm Output

The connection of awarning device (a bell)allows the output totrigger it in the event of analarm status.

Hold Open

The reader can send anoutput signal to hold thedoor in the open position fora required length of time.

Power Failure Mode Capability

Readers can support fail lockedand fail unlocked systems.


There are two levels ofoperation:

MasterThe reader operatesstand alone.

SlaveThe reader is ‘dumb’ andrequires connection to amaster controller.

Hierarchy

Visual DisplayLED’s show the status ofthe reader.

Audible DisplayTones announce thestatus of the reader.

Status Display

Cardswipe Reader

Pre-encoded magnetic stripe cards controlaccess.

Keypad

Push button coded entry controls access.

Proximity Reader

Pre-encoded cards or tags placed near thereader control access.

Reader Systems

A c c e s s C o n t r o l - R e a d e r s

Dark Metallic Grey Dark Grey

AC19

CEK200

Keypads

CPX100

Proximity Reader

CPX10UCP • CPX10MC • CPX10T • CICP • CUCP • CCPC

Cards and Tags

CIK100 • CSK150 CMC400 • CSC450

Card readers


Page

AC22Page

AC22Page

AC23

Page

AC23Page

AC24

AC20


DoorFeatures

Standards

●

●

●

● ●

●

5

5

5

●

●

●

Numberof Users

HierachyMaster Slave

ProgrammingMethod

Keypad Card

InputVoltage

Features/Functions

4 codes

4 codes

4000

●

●

●

●

●

●

●

●

●

●

●

● ●

CurrentConsumptionPeak Hold

HoldOpen

Output

RTEInput

40mA

40mA

90mA

40mA

40mA

90mA

●

●

●

●

●

●

12Vdc

12Vdc

n/a

Lock releaseTime

Output

●

●

●

●

●

AlarmOutput

●

●

3, out

3, out

3, out

Contact

Contact

Contact

IncorrectCode

Lockout

ReaderRange

DoorContact

Monitoring

12Vdc

12Vdc

12Vdc


Keypad

Security Features

CEK200 External Keypad

CIK100 Internal Keypad

CSK150* Slave Keypad

Power Failure Compatability

FL FU

Finish Options

●

●

●

●

●

●

●

●

●

5

5

●

●

10

10

4000

4000

●

●

●

●

●

●

●

●

40mA

30mA

40mA

30mA

●

●

●

●

12Vdc

12Vdc

●

●

3, out

3, out

Contact

Contact

12Vdc

12Vdc

Cardswipe

CMC400 Card Reader

CSC450* Slave Card Reader

●

●

● ● 5 ● 2000 ● ● ●● 200mA200mA ● ●200mA ●● ● 6, out Up to20cm

●

●

●

RetentiveMemory

●

●

●12Vdc

Proximity

CPX100 Proximity Reader ●

DMG DG

*Note - Features & Funct ions when connected to a Master reader.For information on Cards and Tags see page AC24.

Doors Controlled

Single Multi

Status Visual Audible

AC21


Keypads

CIK100

CSK150

CEK200

• Ideal for External and Internal use.

• Robust design with hardwearing

stainless steel buttons.

• Weather protected to IP53 rating.

• low current option available forpowering from batteries.

• Ideal for Internal use or in areassheltered from the weather.

• Hardwearing zinc alloy casing.

• Low current option available forpowering from batteries.

• Slave keypad for use with theCMC400 to give the added secuity ofthe requirement for both a card andcode on entry.

• Hardwearing zinc alloy casing.

CEK200 CIK100 CSK150

Standards

Security Features

● ● ●

●

● ●

5 5 5

● ● ●

Door Features

Single ● ● ●

Multi

Guarantee

CorrosionResistant

TamperResistant

Features/Functions

Number of Users

Master

Slave

Keypad

Card

Input Voltage

Peak

Holding

Hold Open Output

RTE Input

Alarm Output

Lock Release Time Ouput

Visual

Audible

Fail Locked

Fail Unlocked

Retentive Memory

Incorrect Code Lockout

Door Contact Monitoring

Reader Range

Current Consumption

Hierachy

Programming Method

StatusSupply

Power FaliureCompatability

4 codes 4 codes 4000

● ●

●

● ● ●

●

12Vdc 12Vdc 12Vdc

40mA 40mA 90mA

40mA 40mA 90mA

12Vdc 12Vdc n/a

● ● ●

● ●

● ●

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

3, out 3, out 3, out

Contact Contact Contact

Finish Options

DMG

DG

DoorsControlled

70mm

128 mm

41mm

70mm

128 mm

41mm

70mm

128 mm

41mm

AC22


Card Readers

CSC450

CPX100

CMC400

• Ideal for Internal use or areas shelteredfrom the weather.

• Pr-wired cable with reader for easy fit.

• Simple programming from cards, noneed for programming devices orcentrally controlled computers.

• Master card reader (built in controller).

• Ideal for Internal use or areas shelteredfrom the weather.

• Slave card reader (requires connectionto a controller, such as the CMC400).

• Ideal for Internal use or areas shelteredfrom the weather. Gives cost effectivecard swipe access from both sides of adoor when linked with the CMC400.

• Ideal for external and Internal use.

• Pre-wired cable with reader for easy fit.

• Simple programming from cards, no needfor programming devices or centrallycontrolled computers.

• Master Proximity reader (built incontroller).

• Includes ‘start up’ quantity of Master andUser Cards/tokens.

Proximity Reader

50 mm38 mm

128 mm

35 mm

125 m

128 mm

50 mm38 mm

128 mm

35 mm

125 m

128 mm

86mm60mm

86mm

15mm

CMC400 CSC450 CPX100

Standards

Security Features

● ● ●

● ●

● ●

5 5 5

● ●

●

Door Features

Single ● ● ●

Multi 10 10

Guarantee

CorrosionResistant

TamperResistant

Features/Functions

Number of Users

Master

Slave

Keypad

Card

Input Voltage

Peak

Holding

Hold Open Output

RTE Input

Alarm Output

Lock Release Time Ouput

Visual

Audible

Fail Locked

Fail Unlocked

Retentive Memory

Incorrect Code Lockout

Door Contact Monitoring

Reader Range

Current Consumption

Hierachy

Programming Method

StatusSupply

Power FaliureCompatability

4000 4000 2000

● ●

●

●

● ●

12Vdc 12Vdc 12Vdc

40mA 40mA 200mA

30mA 30mA 200mA

12Vdc 12Vdc 200mA

●

●

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

● ●

3, out 3, out 6, out

●

Contact Contact Up to 20cm

Finish Options

DMG

DG

DoorsControlled

AC23


Card Reader Cards

This pack consists of two identical cards used to initialise the reader after installation. The card can be swiped through multiple readers enabling them to function as anintegral system.

Cards are availabe in packs for the CMC400 and CSC450

Initialisation Pack CICP

This pack consists of one program card and a set of user cards. Swiping the program card through a reader validates all the user cards in the pack. Cards are available inpack sizes of 20 or 50 cards. In every pack, a user card has a corresponding shadow card. As user cards are issued, the user identification is written on the shadow cardand stored in a safe place. Swiping a shadow card eliminates its corresponding user card from the reader. Useful when a user card is lost or stolen.

User Card Pack CUCP

This pack of cards extends the flexibility of the system and is needed for the following functions; Hold open, Lock open time 10 seconds, Lock open time 4 seconds, FailLocked/Fail Unlocked, Mute, Keypad code settings (for slave keypad when used with a master card reader), and Card Reader and keypad (to allow the master cardreader to operate alongside a slave keypad, only allowing entry with the correct card and access code).

Control Card Pack CCCP

The reader is supplied with 10 user cards or tokens and 2 master cards for programming.

Additional Cards or Tags are available for the CPX100 (Sold individually).

Proximity Reader Cards and Tags CPX10UCP • CPX10MC • CPX10T

Notes

AC24

Input Output Other CurrentVoltage Voltage Features Output


●

●

5

10

5

5

80mm 250mm 215mm

80mm 330mm 330mm

●

●

●

●

Accessor ies

240Vac LSL

12Vdc 12Vdc

240Vac 12Vdc BBF 3A

240Vac 12Vdc BBF 5A

A c c e s s C o n t r o l A c c e s s o r i e s

• Used for remote release of the motorised locks.• Red/Green light signal of lock status.

• Used to connect frame mounted units to the motorised locks.• Mortice casing for added protection with flexible stainless

steel spring for wiring.

Accessor iesRelease Button CRB Door Loop CDL

CPS3• Used to power the Solenoid locks. • 3A current output.

CPS5• Used to power the Motorised locks. • 5A current output.

• Both models have built in accommodation for backup battery tosupply temporary power in cases of mains failure.

Power Supply CPS3 • CPS5

Key: LSL = Lock Status L ights (Red/Green) BBF = Battery Backup Funct ion

Door FeaturesFeatures / FunctionsStandards Finish Options

White ChromeA c c e s s C o n t r o l

Security Features

osio

n es

ista

nt

Gua

rant

ee

CRB Release Button

CDL Door Loop

CPS3 Power Supply

CPS5 Power Supply

83mm

95mm

55mm

AC25

25mm

330mm

17mm

F u r n i t u r e & F i t t i n g s

Fu

rn

itu

re

&F

itt

ing

s

` • S t a i n l e s s S t e e l

• B r a s s

• N y l o n

• A l u m i n i u m

FF2


1

2

3

4


5

6

8

9

10

11

12












7

Security FeaturesIntroduction How to Specify


Furniture & Fitt ings Index

• IntroductionStainless Steel• Features and Functions• Photo Gallery• Range TableLever Handles• Return to Door• StraightFittings

Brass• Features and Functions• Photo Gallery• Range TableLever Handles• Round Bar• Georgian Style• Victorian StyleFittings

Nylon• Features and Functions• Photo Gallery & Range TableLever Handles• Round BarFittings

Aluminium• Features and Functions• Photo Gallery • Range TableLever Handles• Round Bar• Straight• Large BackplateFittings

FF2

FF3FF4FF5

FF6FF6

FF7 - FF8

FF11FF12FF13

FF14FF14FF15

FF16 - FF19

FF20FF21

FF22FF22 - FF26

FF27FF28FF29

FF30FF30FF31

FF32 - FF35

Chubb offers a very comprehensive range ofFurniture and Fittings. Lever handles are availablein various forms to offer both contemporary andclassic styles. A large range of finishes offer theability to match other products on a door - such asdoor closers or panic hardware.The Fittings range includes pull handles, roses andescutcheons, push plates, door stops, and variousaccessories. Designed to last, the furniture and fittings rangeare available made from Stainless Steel, Brass,Nylon or Aluminium.

Chubb is accredited with and meetsthe requirements of BSEN9001


From today you can specifically detail yourrequirements for a product, therefore ensuring thatit meets a particular standard or approval.

In addition you can now ask for specific securityfeatures to be included in the product you specify.



Nylon

Stainless Steel

Aluminium

Brass

Products that meet PSAMOBH3PS have been tested tothe performance specifications issued by the PropertyServices Agency.

FF3

F u r n i t u r e - S t a i n l e s s S t e e l

▼


Ideal for use with: Mortice locks & latches

Sty l ing

Finish: Satin Stainless Steel Polished Stainless Steel

Handle Fixing

Round bar levers are fixed to thespindle with a grubscrew.

GuaranteeGuarantee period applicable whenoriginal Chubb maintenanceinstructions are followed.

The furniture can be fixed to thedoor in two ways.

Bolt ThroughThe inside and outside furnitureare bolted together with a pair ofspecial bolts that pass through thelock and door.Face FixThe furniture is screw fixed to thesurface of the door.

Fixing Types

The furniture is available to suitmortice locks and latches, eitherusing roses and escutcheons orbackplates - lever key, euro profile,oval profile, bathroom and latchtypes are included.

Latch (LA)For use with tubular latches.

Lever Lock (LO)For use with mortice locksoperated by a lever key.Euro (PE)For use with cylinder mortice locksoperating with a Euro ProfilecylinderOval (PO)For use with cylinder mortice locksoperating with an Oval Profilecylinder.Bathroom (PB)For use with mortice locks thatincorporate a spindle thrown deadbolt.

Lever Furniture Variations

SprungThe lever returns to the restposition irrespective of any springaction in the lock.UnsprungThe lever returns to rest on thespring action of the lock only.

Springing

FF3

The furniture is available in two styles:

Rose StyleThe handle andcylinder escutcheonare availableseparately on a rose.

Backplate StyleThe handle andcylinder cut out areon a single backplate.

F ix ingsAll fixings, such as screws and bolts are supplied.

• This is the measurementfrom the centre of the‘follower’, which operatesthe handles, to the centreof the keyhole.

• In the UK this is commonly57mm, although othersizes are available.

Spindle

All furniture is supplied with an8mm spindle.

Concealed Fixing

Some products feature clip on coverplates which cover the fixings.

What are Centres?

Centres

Products that meet MOBH3PS havebeen tested to the performancespecifications issued by the PropertyServices Agency.


FF4

Lever Handles - Return to Door

Page

FF6Page

FF6Page

FF6

Lever Handles - Straight

Page

FF6CS400RRS Page

FF6Page

FF6CS403RRS

CS400 Range CS402 Range CS403 Range

CS402RRS

Styling Variation Fixing Concealed SpringingBackplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung

● ● ● ●

● ● ● ● ●

● ● 57mm ● ● ●

● ● 48mm ● ● ●

● ● 48mm ● ● ●

● ● 57mm ● ● ●

Features / Functions Finish Options

● ●

● ●

● ●

● ●

● ●

● ●

5

5

5

5

5

5

SSS PSSF u r n i t u r e & F i t t i n g s


Security Features

CS400RRS 20mm Round Bar handle

CS400LA 20mm Round Bar handle

CS400LO 20mm Round Bar handle

CS400PE 20mm Round Bar handle

CS400PO 20mm Round Bar handle

CS400PB 20mm Round Bar handle

● ● ● ●

● ● ● ● ●

● ● 57mm ● ● ●

● ● 48mm ● ● ●

● ● 48mm ● ● ●

● ● 57mm ● ● ●

● ● ● ●

● ● ● ● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

5

5

5

5

5

5

5

5

5

5

5

5


CS402RRS 20mm Round Bar handle

CS402LA 20mm Round Bar handle

CS402LO 20mm Round Bar handle

CS402PE 20mm Round Bar handle

CS402PO 20mm Round Bar handle

CS402PB 20mm Round Bar handle

CS403RRS 20mm Shaped Round Bar Handle

CS403LA 20mm Shaped Round Bar Handle

CS403LO 20mm Shaped Round Bar Handle

CS403PE 20mm Shaped Round Bar Handle

CS403PO 20mm Shaped Round Bar Handle

CS403PB 20mm Shaped Round Bar Handle

FF5

CS403LA

FF6

Lever Handles - Return to Door20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle


Model Centres

CS400LA n/a

CS400LO 57mm

CS400PE 48mm

CS400PO 48mm

CS400PB 57mm

CS400LO

CS400LA

CS400PE CS400PO CS400PB

Lever Handles - Straight20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle

Model Centres

CS402LA n/a

CS402LO 57mm

CS402PE 48mm

CS402PO 48mm

CS402PB 57mmCS402LA

20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle

Model Centres

CS403LA n/a

CS403LO 57mm

CS403PE 48mm

CS403PO 48mm

CS403PB 57mm

CS403RRS

52mm

140mm

67mm

44mm

20mm

67mm

8mm

20mm

8mm

165mm

44mm 67mm

165mm

140mm

130mm

44mm 59mm

20mm

8mm

165mm

125mm

20mm

8mm

52mm

130mm

67mm

20mm

8mm

52mm

124mm

67mm

20mm

8mm

• Ideal for heavy duty applications.






CS402LO CS402PE CS402PO CS402PB

CS403LO CS403PE CS403PO CS403PB

CS400RRS

CS402RRS

FF7

F i t t i n g s - S t a i n l e s s S t e e l

• Ideal for use with the round rose handle. • Ideal for heavy duty applications.

CS448OCS448E

CS448R

CS416PE CS416PO

CS416LO

CS448B

CS416TU

Fitt ings

• Bolt Fix. • Back to Back Fix.

Model A

CS417/1BF 150mm

CS417/2BF 225mm

CS417/3BF 300mm

Model A

CS419/1BB 150mm

CS419/2BB 225mm

CS419/3BB 300mm

Cylinder Pulls

Pull Handles Pull Handles

52mm

7mm

52mm

7mm

7mm

52mm

7mm

52mm

AA

Escutcheons & Turn Indicator

78mm

43mm

43mm

78mm

43mm

78mm

43mm

78mm

60mm

60mm

19mm19mm

CS450

FF8


Fitt ings

• Pull handle mounted on Backplate, Screw Fix. • Concealed Fix.


Model A

CS418/1CF 150mm

CS418/2CF 225mm

CS418/3CF 300mm

Model A B C

CS420/1P 165mm 150mm 155mm

CS420/2P 300mm 225mm 75mm

CS420/3P 350mm 300mm 75mm

CS320/1P

CS452

CS453

Letter Plate & Door Tidy Towel Rail

AB

C

A

600mm

52mm

52mm

19mm

332mm

100mm

300mm

75mm

FF9


Finger Plates & Kicking Plates

CS469

CS464

Bell Push

CS449

Toilet Roll Holder

CS465

Hand Rail Bracket

Fitt ings

CS462

Flush Bolt

• Dimensions of 100mm x 150mm.• Lever Action.

Signs

CS446MS CS446FS CS446DS

19mm

CS467

CS468

75mm

300mm

sized to order

sized to

order

250mm

150mm

100mm 100mm 100mm

150mm 150mm

135mm

70mm

52mm 76mm52mm

CS445 Range

CS446 CS447

Hooks


Fitt ings

FF10

Wardrobe Hook Hat & Coat Hook

CS442

CS445FC CS445FBCS445OFS

Wall Mounted Door Stops

Concealed FixSecret Fix

Concealed Fix Bumper Secret FixOval Shielded

Model A

CS444/5 50mm

CS444/7 75mm

Notes

A75mm

Floor Mounted Door Stops

50mm 50mm 30mm

62mm

28mm19mm

85mm

28mm19mm

F u r n i t u r e - B r a s s

▼


Ideal for use with: Mortice locks & latches.

S ty l ing

Finish: Polished Brass

Handle Fixing

Round bar levers are fixed to thespindle with a grubscrew.




Fixing Types

The furniture is available to suitmortice locks and latches, eitherusing roses and escutcheons orbackplates - lever key, euro profile,oval profile, bathroom, privacy andlatch types are included.


Lever Lock (LO)For use with mortice locksoperated by a lever key.Euro (PE)For use with cylinder mortice locksoperating with a Euro ProfilecylinderOval (PO)For use with cylinder mortice locksoperating with an Oval Profilecylinder.Bathroom (PB)For use with mortice locks thatincorporate a spindle thrown deadbolt.Privacy (PR) For use with tubular larches wherethe handle requires locking.



Springing

FF11




• In addition to the contemporary round bar range,Chubb also have a range of classic Georgian andVictorian styles available.




Spindle


Concealed Fixing


What are Centres?

Centres


FF12

Lever Handles - Return to Door Lever Handles - Victor ian Sty leLever Handles - Georgian Sty le

Page

FF15

Page

FF14Page

FF15Page

FF15Page

FF14

CBR205 Range CBR206 Range • CBR208 RangeCBR207 Range Page

FF14CBR200 RangePage

FF14Page

FF15

CBR200RR CBR207PR CBR205PR CBR206PR

Styling Variation Fixing Concealed SpringingBackplate Rose Latch Lock Euro Oval Bathroom Privacy Centres Face Fix Bolt Through Fixing Sprung Un Sprung Other

● ● ● ●

● ● ● ● ●

● ● 57mm ● ● ●

● ● 48mm ● ● ●

● ● 48mm ● ● ●

● ● 57mm ● ● ●

Features / FunctionsFinish

Options

●

●

●

●

●

●

5

5

5

5

5

5

PolishedBrass



Security Features

CBR200RR 20mm Round Bar handle

CBR200LA 20mm Round Bar handle

CBR200LO 20mm Round Bar handle

CBR200PE 20mm Round Bar handle

CBR200PO 20mm Round Bar handle

CBR200PB 20mm Round Bar handle

● ● ● ● SB

● ● 57mm ● ●

● ● 57mm ● ●

● ● ● ● SB

● ● ● ● SB

● ● 57mm ● ●

● ● 57mm ● ●

● ● ● ● SB

● ● ● ● SB

● ● 57mm ● ●

● ● 57mm ● ●

●

●

●

●

●

●

●

●

●

●

●

5

5

5

5

5

5

5

5

5

5

5

Lever Handles - Victorian Style

CBR205LA Victorian Straight

CBR205LO Victorian Straight

CBR205PB Victorian Straight

CBR205PR Victorian Straight

CBR206LA Victorian Scroll

CBR206LO Victorian Scroll

CBR206PB Victorian Scroll

CBR206PR Victorian Scroll

CBR208LA Victorian Shaped Scroll

CBR208LO Victorian Shaped Scroll

CBR208PB Victorian Shaped Scroll

● ● ● ● SB

● ● 57mm ● ●

● ● 57mm ● ●

● ● ● ● SB

●

●

●

●

5

5

5

5

Lever Handles - Georgian Style

CBR207LA Georgian Handle

CBR207LO Georgian Handle

CBR207PB Georgian Handle

CBR207PR Georgian Handle

FF13

Key: SB = Short Backplate

FF14

• Ideal for heavy duty applications.• See fittings for matching eschutcheons.

• Bathroom version has inside turn and outside emergency release. • Ideal for heavy duty applications.



Model Centres

CBR200LA n/a

CBR200LO 57mm

CBR200PE 48mm

CBR200PO 48mm

CBR200PB 57mm

Lever Handles - Georgian Sty leGeorgian Handle on Backplate

Model Centres

CBR207LA n/a

CBR207LO 57mm

CBR207PB 57mm

• Ideal for medium/heavy duty applications.• For use with tubular latches.• Inside turn locks handle, emergency release on outside handle.

20mm Round Bar Handle on Backplate

129mm 63mm

180mm

40mm 11mm

51mm

63mm

129mm

7mm

•••••••••••••• ••••••••••••••••• • • •

20mm Round Bar Round Rose Handle

Georgian Privacy Handle

CBR200LA

CBR200RR

CBR207PR

Outside Handle

CBR200LO CBR200PE

CBR200PO CBR200PB

96mm

110mm

50mm

55mm

9mm

•••••••••••••• ••••••••••••••••• • • •

• Bathroom version has inside turn and outside emergency release. • Ideal for heavy duty applications.

96mm

120mm

50mm

55mm

9mm

CBR207LA

CBR207LOCBR207PB

Long Backplate

CBR207LAShort Backplate

CBR207LO CBR207PB

•••••••••••••• ••••••••••••••••• • • •

96mm

110mm

50mm

55mm

9mm

Victorian Shaped Scroll

• Ideal for medium/heavy duty applications.• For use with tubular latches.• Inside turn locks handle, emergency release

on outside handle.

Lever Handles - Victor ian Sty leStraight Handle on Backplate

Scroll Handle on Backplate


Model Centres

CBR205LA n/a

CBR205LO 57mm

CBR205PB 57mm

Model Ctr.

CBR206LA CBR208LA n/a

CBR206LO CBR208LO 57mm

CBR206PB CBR208PB 57mm

CBR208 Range

• Victorian Scrollhandle on ashaped backplate (203mm x 50mm).

• Available in Latch,Lock andBathroomvariations.

• Ideal for medium/heavy duty applications.• For use with tubular latches.• Inside turn locks handle, emergency release

on outside handle.

Straight Privacy Handle

Scroll Privacy Handle

CBR205PR

CBR206PR

Outside Handle

Outside Handle

FF15

105mm

120mm

42mm

33mm

10mm

120mm

98mm

46mm

42mm

10mm

• Ideal for medium/heavy duty applications.• Bathroom version has inside turn and outside emergency release.

• Ideal for medium/heavy duty applications.• Bathroom version has inside turn and outside emergency release.

CBR205LA

CBR206LA CBR208LA

CBR205LO CBR205PB

CBR206LOCBR208LO

CBR206PBCBR208PB

120mm

42mm

98mm

120mm

42mm

46mm

10mm

105mm

105mm

120mm

42mm

33mm

10mm

33mm

10mm

CBR205LOCBR205PB

Long Backplate

CBR206LO • CBR206PBLong Backplate

150mm long



FF16

F i t t i n g s - B r a s s

• Ideal for use with the round rose handle.

CBR248PECBR215PE CBR215PO

CBR215LO CBR248B

CBR216TU

Fitt ings

• Bolt fix handle. • Cranked pull handle, screw fix.

Escutcheons and Turn Indicator Cylinder Pulls


CBR248PO

Model A

CBR238/2 225mm

CBR238/3 300mm

CBR248R

52mm

7mm

52mm78mm 78mm

43mm

78mm

43mm

43mm

78mm

43mm

52mm

52mm

7mm

7mm7mm

52mm

60mm60mm 50mm

AA 19mm

Model A

CBR217/1BF 150mm

CBR217/2BF 225mm

CBR217/3BF 300mm

FF17


Fitt ings

• Ideal for heavy duty applications.• Back to Back fix.

• Pull handle mounted on backplate, screw fix. • Concealed fix.

Pull Handles Finger Plates & Kicking Plate

Model A

CBR218/1CF 150mm

CBR218/2CF 225mm

CBR218/3CF 300mm

Model A

CBR219/1BB 150mm

CBR219/2BB 225mm

CBR219/3BB 300mm

AB

C

Model A B C

CBR220/1P 165mm 150mm 155mm

CBR220/2P 300mm 225mm 75mm

CBR220/3P 350mm 300mm 75mm

CBR220/IP


A

A

CBR269

75mm

300mm

CBR267

CBR268

sized to order

sized to

order

52mm

60mm

19mm

19mm

Model A

CBR259/1 76mm

CBR259/2 102mm

CBR259/3 152mm

CBR259/4 204mm

CBR259/5 254mm

CBR259/6 305mm

FF18


Indicator Bolt

CBR252 CBR255

Letter Plate & Door Tidy

Hand Rail Bracket

Wardrobe Hook Hat & Coat Hook

Hooks

Signs

CBR266MS CBR266FS CBR266DS

CBR249

CBR250

Toilet Roll Holder

Towel Rail

Fitt ings

CBR264

Bell Push

CBR265

CBR246

CBR247

A

Cabin Hooks

150mm

100mm 100mm 100mm

150mm 150mm

CBR263 57mm

41mm

63mm

135mm 52mm

70mm

55mm 80mm

300mm

75mm

600mm

52mm

50mm

62mm

28mm

227mm

50mm

Concealed Fix

Model A

CBR244/5 50mm

CBR244/7 75mm

CBR257W

CBR257H

CBR260

CBR240

Knob Furniture & Cabinet Handle

Oval Sheilded Round Shielded Bumper Secret Fix

Wall Mounted Door Stops Floor Mounted Door Stops

Bolts Casement Stay

Casement Fasteners


Fitt ings

CBR245OFS CBR245FS CBR245FB

A

A

A

Model A

CBR258/2 100mm

CBR258/3 150mm

Model A

CBR262/1 150mm

CBR262/2 200mm

Barrell Bolts

Wedge Type• Supplied with 8mm spindle. Hook Type

Lever Action Flush Bolts

Model A

CBR240/10 100mm

CBR240/15 152mm

Model A

CBR256/2 254mm

CBR256/3 300mm

A75mm

Secret Fix

CBR242

FF19

50mm 41mm 30mm

90mm

37mm

A 9.5mm

105mm

110mm

FF3

F u r n i t u r e - N y l o n

Features and Funct ionsStyl ing

Finish:

Handle Fixing

Round bar levers are fixed to thespindle with a grub screw.

Fire ResistantCertain products have been includedin a successful fire test to BS 476 PT22


Products that meet PSAMOBH3PShave been tested to the performancespecifications issued by the PropertyServices Agency.



Fixing Types

The furniture is available to suitmortice locks and latches, eitherusing roses and escutcheons orbackplates - lever key, euro profile,oval profile, bathroom and latchtypes are included.





Springing

FF20







Spindle


Concealed Fixing


What are Centres?

Centres

Steel Cored

Steel core of the handle helpsto increase the strength.

Black RAL 9005 White RAL 9016 Blue RAL 5002 Dark Blue RAL 5003 Red RAL 3003 Dark Red RAL 3005

Light Grey RAL 7036 Dark Grey RAL 7043 Green RAL 6016 Yellow RAL 1004 Brown RAL 8017

Page

FF22CN100 Range

F u r n i t u r e - N y l o n

FF21


Page

FF22CN100RR

Styling Variation Fixing Concealed SpringingBackplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung

● ● ● ●

● ● ● ● ●

● ● 57mm ● ● ●

● ● 48mm ● ● ●

● ● 48mm ● ● ●

● ● 57mm ● ● ●


● ● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ● ●

● 5

5

5

5

5

5



Security Features

CN100RR Steel Core Round Bar

CN100LA Steel Core Round Bar

CN100LO Steel Core Round Bar

CN100PE Steel Core Round Bar

CN100PO Steel Core Round Bar

CN100PB Steel Core Round Bar

9005 9016 5002 5003 3003 3005 7036 7043 6016 1004 8017

FF22

CN100RR

Lever Handles - Return to Door21mm Round Bar Handle on Backplate

F u r n i t u r e & F i t t i n g s - N y l o n

Model Centres

CN100LA n/a

CN100LO 57mm

CN100PE 48mm

CN100PO 48mm

CN100PB 57mmCN100LA

52mm

135mm

64mm

46mm

21mm

73mm

225mm

135mm

21mm

CN115PE CN115PO

CN115LO

CN116TU

Fitt ingsEscutcheons and Turn & Indicator Cylinder Pulls

CN100LO CN100PE CN100PO CN100PB

21mm Round Bar Round Rose Handle

CN148RCN148B

CN148POCN148PE

43mm

78mm

43mm

78mm

9mm

52mm

9mm

52mm

9mm

52mm

9mm

52mm

43mm

78mm

43mm

78mm

FF23

F i t t i n g s - N y l o n

Fitt ings

• Bolt Fix. • Back to Back Fix.


• Concealed Fix. • CN134 Range are Bolt Fix. • CN135 Range are Concealed Fix.


Model A B C

CN131/1BF 165mm 64mm 23mm



Model A B C

CN132/1CF 165mm 52mm 23mm



Model A

CN134/2CBF 200mm

CN134/3CBF 300mm

CN135/2CBF 200mm

CN135/3CBF 300mm

AC A34mm

34mm

85mm

B

A C

A 34mm

120mm

Model A

CN133/2BB 220mm

CN133/3BB 300mm

70mm

B

FF24


Fitt ings

• CN137/3SBF is Bolt Fix. • CN137/3SCF is Concealed Fix. • CN136/3TBF is Bolt Fix. • CN136/3TCF is Concealed Fix.


Model A

CN137/3SBF 88mm

CN137/3SCF 98mm

Model A

CN136/3TBF 85mm

CN136/3TCF 97mm


CN167 CN168CN169 CN152DT

CN152LP


75mm

300mm

75mm

300mm sized to order

sized to

order

380mm

90mm

90mm

380mm

235mm

AA

300mm300mm

70mm

246mm

34mm

70mm

CN150TR

FF25


CN164BP

Bell Push

CN150R

Towel Ring & Towel Rail

Cabinet Handles

CN149TH

Toilet Roll Holder

Fitt ings

Barrel Bolts Flush Bolt

450mm160mm

50mm

126mm

50mm

20mm

52mm17mm CN161CK

Cupboard Knob

40mm

40mm

220mm

160mm

50mm

A

C B

Model A B C

CN141/6CH 32mm 64mm 10mm

CN141/9CH 38mm 96mm 12mm

CN162FB

Model A

CN158/1 152mm

CN158/2 200mmA

25mm

203mm

19mm

CN165DS

CNSGFA FIRE EXIT èCNSGFB FIRE EXIT çCNSGFC FIRE EXIT êCNSGFD FIRE EXIT éCNSGFE FIRE EXIT ì

CNSGEF EXIT èCNSGEG EXIT çCNSGEH EXIT êCNSGEJ EXIT éCNSGEK EXIT ì

CNSBA Fire door keep closedCNSBB Fire door keep lockedCNSBC Automatic fire doorCNSBD Close this door at nightCNSBE This door is alarmedCNSBF Alarm will sound if bar is pushedCNSBG This door must be kept closedCNSBH Gangway keep clearCNSBJ Fire escape keep clearCNSBK Fire exit keep clear

CN165FS CN165MS

100mm

CN166DS

150mm

CN166FS CN166MS

100mm

150mm

100mm

150mm

CN146W

CN142

CN145FC

CN147CF

Signs & Symbols


Fitt ings

FF26

164mm62mm

35mm

Door Stops Hooks

75mm

40mm

Secret Fix Wall Mounted Concealed Fix Floor MountedWardrobe Hook

Hat & Coat Hook - Concealed Fix Hat & Coat Hook -Face Fix

145mm

63mm

CN147FF

• Rigid Plastic - Screw fixing.• All exit signs feature running person icon. • Available as Rigid Plastic - Screw fixing, or Vinyl Self Adhesive. • Rigid Plastic - Screw fixing.

Sign shown is:CNSFE FIRE EXIT ì

Sign shown is:CNSBJ Fire exit keep clear

CN165DS

52mm

80mm

35mm 35mm

▼Ideal for use with: Mortice locks & latches

FF3

Features and Funct ionsStyl ing

Finish:

Handle Fixing

Round bar levers are fixed to thespindle with a grub screw.




Fixing Types


Springing

FF27







Spindle


Concealed Fixing


What are Centres?

Centres

F u r n i t u r e - A l u m i n i u m

Satin Anodised Textured Silver

Satin Anodised

Textured SilverThe furniture is available to suitmortice locks and latches, eitherusing roses and escutcheons orbackplates - lever key, euro profile,oval profile, bathroom and latchtypes are included.





FF28

Lever Handles - Return to Door Lever Handles - Straight

Page

FF30CA300RR • CA304RR

Page

FF30CA300 Range • CA304 Range

Page

FF30CA302RR

Page

FF30CA302 Range

Page

FF303CF

Page

FF303R35

Page

FF303K70

Style Variation Fixing Concealed SpringingBackplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung Other

● ● ● ● ●

● ● ● ● ● ●

● ● 57mm ● ● ● ●

● ● 48mm ● ● ● ●

● ● 48mm ● ● ● ●

● ● 57mm ● ● ● ●

● ● ● ● ● ● RCB

● ● 57mm ● ● ● ● RCB

● ● 57mm ● ● ● ● RCB

● ● ● ● ●

● ● ● ● ● ●

● ● 57mm ● ● ● ●

● ● 48mm ● ● ● ●

● ● 48mm ● ● ● ●

● ● 57mm ● ● ● ●



Security Features

Key: RCB = Radius Cornered Backplate LH = Left Hand RH = Right Hand

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5


CA300RR 20mm Round Bar Handle

CA300LA 20mm Round Bar Handle

CA300LO 20mm Round Bar Handle

CA300PE 20mm Round Bar Handle

CA300PO 20mm Round Bar Handle

CA300PB 20mm Round Bar Handle

CA301RLA 20mm Round Bar Handle

CA301RLO 20mm Round Bar Handle

CA301RPB 20mm Round Bar Handle







FF29

● ●

● ●

● ●

● ●

● ●

● ●

●

●

●

●

●

●

●

●

●

● ● 57mm ● ● ● ●

● ● 57mm ● ● ● ● LH

● ● 57mm ● ● ● ● RH

● ● 53mm ● ● ● ●

● ● ● ● ●

● ● ● ● ● ●

● ● 57mm ● ● ● ●

● ● 48mm ● ● ● ●

● ● 48mm ● ● ● ●

● ● 57mm ● ● ● ●

5

5

5

5

5

5

5

5

5

5


3K70 Straight Handle

3R35L Straight Handle

3R35R Straight Handle

3CF Straight Handle







●

●

●

●

●

●

●

●

●

●

SatinAnodised

TexturedSilver

FF30




CA302RR

20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle

CA302LOCA302LA CA302PE CA302PO CA302PB

40mm 65mm

154mm

120mm

3K70 3CF3R35

Round Bar Handle on Backplate Round Bar Round Rose Handle

Model CentresLA n/aLO 57mmPE 48mmPO 48mmPB 57mm

CA300LACA304LA

CA300PECA304PE

CA300POCA304PO

CA300PBCA304PB

Model A

CA300RR 20mm

CA304RR 22mm

Model ACA300 Range 20mmCA301R & CA304 Ranges 22mm 52mm

126mm

63mm

40mm

A

65mm

154mm

132mm

A

52mm

120mm

62mm

20mm20mm

200mm 102mm

40mm

10mm

200mm 102mm

40mm

10mm

200mm 102mm

40mm

10mm

• 57mm Centres. • 57mm Centres.• For use with the

3R35 mortice lock.

• 53mm Centres.

• CA300 Range available in Textured Silver finish.

• Rounded Backplate(RCB).

CA301R Range

Model CentresCA302LA n/aCA302LO 57mmCA302PE 48mmCA302PO 48mmCA302PB 57mm

CA300LOCA304LO


Lever Handles - Return to Door on Large Backplates

CA311LOCA312LOCA313LOCA314LO

CA311LA • CA312LACA313LA • CA314LA

CA311PECA312PECA313PECA314PE

CA311POCA312POCA313POCA314PO

CA311PBCA312PBCA313PBCA314PB

160mm

see table below

A

Style Variation Fixing Concealed SpringingBackplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung Other



Security Features

160 x 64 ● ● ●

160 x 64 ● 57mm ● ●

160 x 64 ● 48mm ● ●

160 x 64 ● 48mm ● ●

160 x 64 ● 57mm ● ● LH/RH

160 x 160 ● ● ●

160 x 160 ● 57mm ● ●

160 x 160 ● 48mm ● ●

160 x 160 ● 48mm ● ●

160 x 160 ● 57mm ● ● LH/RH

5

5

5

5

5

5

5

5

5

5

Lever Handles - On Large Backplates

●

●

●

●

●

●

●

●

●

●

SatinAnodised


Key: * Round Bar Handle LH = Left Hand RH = Right Hand

CA311LA*(20mm) ● CA312LA* (22mm)

CA311LO*(20mm) ● CA312LO* (22mm)

CA311PE* (20mm) ● CA312PE* (22mm)

CA311PO*(20mm) ● CA312PO* (22mm)

CA311PB* (20mm) ● CA312PB* (22mm)

CA313LA*(20mm) ● CA314LA* (22mm)

CA313LO*(20mm) ● CA314LO* (22mm)

CA313PE* (20mm) ● CA314PE* (22mm)

CA313PO*(20mm) ● CA314PO* (22mm)

CA313PB* (20mm) ● CA314PB* (22mm)

(mm)

• Available in two Backplate sizes.

Model ACA311 Range 20mm

CA312 Range 22mm

CA313 Range 20mm

CA314 Range 22mm

Model Centres

LA n/a

LO 57mm

PE 48mm

PO 48mm

PB 57mm

FF31

• 160 x 64 Backplate.

• Available in Lock, Euro, Oval & Bathroom styles.

CA311 Range • CA312 Range

F32

F i t t i n g s - A l u m i n i u m

• Also available in Textured Silver finish.

CA348POCA348PE

CA348R

CA315PE CA315PO

CA315LO CA348B

CA316TU

Fitt ings

• Bolt Fix. • CA317 is also available in Textured Silver finish. • Concealed Fix.

Model A

CA324/1CF 150mm

CA324/2CF 225mm

CA324/3CF 300mm

Model A

CA318/1CF 150mm

CA318/2CF 225mm

CA318/3CF 300mm

Model A

CA323/1BF 150mm

CA323/2BF 225mm

CA323/3BF 300mm

Model A

CA317/1BF 150mm

CA317/2BF 225mm

CA317/3BF 300mm

Escutcheons & Indicator Turn Cylinder Pulls


7mm

52mm

7mm

52mm

7mm

52mm

7mm

78mm

43mm

78mm

43mm

78mm

43mm

78mm

43mm

52mm

Model B

CA317 Range 19mm

CA323 Range 22mm

Model B

CA318 Range 19mm

CA324 Range 22mm

B AB A

FF33


Fitt ingsPull Handles Pull Handles


Model A

CA325/1BB 150mm

CA325/2BB 225mm

CA325/3BB 300mm

Model A

CA319/1BB 150mm

CA319/2BB 225mm

CA319/3BB 300mm

Model B

CA319 Range 19mm

CA325 Range 22mm

Model B

CA320 Range 19mm

CA326 Range 22mm

Model A

CA338 /2 225mm

CA338/3 300mm

Model A

CA322/2CBB 225mm

CA322/3CBB 300mm

CA320/1P

B A

60mm

A

60mm 50mm

DA

C

B

• Cranked Pull Handle, Screw Fix.

A B

• CA322 & CA328 are Back to Back Fix versions of CA321 & CA327.

• Back to Back Fix.

• Pull Handle mounted on Backplate, Screw Fix.

Model A

CA321/2CBF 225mm

CA321/3CBF 300mm

Model B

CA321 & CA322 Range 19mm

CA327 & CA328 Range 22mm

Model A B C

CA326/1P • CA320/1P 165mm 150mm 155mm

CA326/2P • CA320/2P 300mm 225mm 75mm

CA326/3P • CA320/3P 350mm 300mm 75mm107mm

FF34



CA369

CA355CA355

CA364


Bell Push

CA349

CA350

Toilet Roll Holder

CA365

Towel Rail

Hand Rail Bracket

Fitt ings

52mm

79mm

300mm

52mm10mm

76mm

300mm

75mm

CA467

CA468 sized to order

sized to

order

135mm

600mm

52mm

70mm

227mm

50mm

CA345OFS

CA342

CS445 Range

CA346

CA347

Wall Mounted Door Stops

Wardrobe Hook

Hooks


Fitt ingsFlush Bolts & Barrel Bolts Signs

Floor Mounted Door Stops

CA366MS CA366FS CA366DS

FF35

Hat & Coat Hook • CA347 Available in buffered finish (CA347B)

Oval Shielded

Wall Mounted Secret Fix

65mm

60mm

92mm

75mm

Model ACA358/1 75mm

CA358/2 100mm

CA358/3 150mm

Model ACA362/1 150mm

CA362/2 200mm

Model ACA344/5 50mm

CA344/7 75mm

AA

A

50mmCA345FS

Round Shielded

50mm

75mm

100mm

150mm

100mm

150mm

100mm

150mm

Concealed Fix

D o o r C l o s e r s

Do

or

Clo

se

rs

• O v e r h e a d


• E l e c t r o - M a g


• F l o o r s p r i n g s

• A u t o m a t i c

D o o r S y s t e m s

P


1

2

3

4


5

6

8

9

10

11

12












7


Fitt ing Configurat ions


Door Closers Index

• Introduction

Overhead Closers

• BS EN 1154 Classification


• Cover Designs

• Cover Finishes

• Range Table

• Power Adjustable Closers

• Transom Concealed Closer

Electro-Mag Closers



• Photo Gallery

• Range Table

• Electro Mags

Floor Springs



• Photo Gallery

• Range Table

• Floor Springs

Automatic Door Systems

• Automatic Door Systems

• Notes Page

D2

D3

D3

D4

D4

D5

D6 - 9

D10

D11

D11

D12

D12

D13 - 14

D15

D15

D16

D16

D17-19

D20 - 21

D22 - 23

Chubb offer a comprehensive range of Door Closersfor architectural specification.

The range includes overhead closers, electro-magnetic closers, floor springs and automatics.

There are a choice of 2 cover designs and a varietyof power engines sourced from the worlds’ leadingcloser manufacturers. A comprehensive range offinishes are available to complement the furnitureranges.

Chubb is accredited with and meets therequirements of BS EN ISO 9001: 1994.

Chubb have developed a series of icons to enablethe process of product specification to be simplified.


Example 1: If you require an overhead closer thatmeets BS EN 1154 look for the relevant logo.

Example 2: If this closer then needs to conform toappropriate fire test requirements, look for icon 9.


Classifies doorclosers using a 6digit coding system.

Classifies electricallypowered hold-opendevices using a 6digit coding system.

D2

BS EN 1154 BS EN 1155

O v e r h e a d D o o r C l o s e r s

Figure 1

Figure 61

Figure 66

Slide Track


Finishes:

BS EN 1154 Class i f icat ion Features and Funct ions

Covers

Two cover designs are available tosuit all but the 1000 series closer.Both are available in a wide choice ofarchitectural finishes.

Covers

Products successfully type-tested for conformity toBS EN 1154.

Power Adjust Shoe

On certain models the power of thecloser can be increased by up to 15%by the positioning of the armset shoe.

Bracket

The provision of a bracketallows the closer to bemounted in the Parallelarm position.

Adjustable Latch

Provides adjustable speed control overthe last few degrees of closingallowing either slowing down thedoor to provide a cushioning effect orspeeding up to overcome a latch.

Arm

Either screw or slideadjustable arm asstandard.

Backcheck

Provides an adjustable cushioningeffect when the door is thrown open.

Adjustable Sweep

Allows adjustment over the closingspeed of a door during the sweepphase.

Delayed Action

Provides an adjustable time delay inthe closing cycle of the door allowingthe disabled, elderly or trolleys topass through the door unhindered.

Power Adjust

Only available on higher specificationmodels, this function provides poweradjustment of the closer when fittedwhich allows the power of the closer tobe matched exactly to the requirementsof the door.

Door Closer Action

This standard classifies door closers using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standards performancerequirements.

Digit 1 - Category of use • Grade 3: For closing doors from at least 105˚.• Grade 4: For closing doors from 180˚ open.

Digit 2 - Durability • Grade 8: 500,000 test cycles completed.

Digit 3 - Test door mass/size Seven grades are identified as shown in the table below where a closer provides a range of power sizes both the minimum and maximum sizes shall be shown.

Digit 4 - Fire behaviour • Grade 0: Not suitable for use on fire/smoke doors.• Grade 1: Suitable for use on fire/smoke doors.

This is assessed outside of BS EN 1154.

Digit 5 - Safety • Grade 1: All door closers are required to satisfy the essential requirement of safety in use.

Digit 6 - Corrosion resistance Five grades are identified according to BS EN1670.• Grade 0: No defined corrosion resistance.• Grade 1: Mild resistance.• Grade 2: Moderate resistance.• Grade 3: High resistance• Grade 4: Very high resistance.

ExampleThe following marking denotes a closer capable of opening to at least 105˚, with a power size of 3, which is suitable for use on fire/smoke doors.

Fire ResistantSuitable for use on fire / smokedoors.

3 8 3 1 1 0

Test door mass/size

Door Closer Test door Recommended doorpower size mass Kg leaf width mm.

1 20 7502 40 8503 60 9504 80 11005 100 12506 120 14007 160 1600

Normal Opening Backcheck

DelaySweep

Latch

Test door mass/size

GuaranteeGuarantee period applicablewhen maintenance instructionsfollowed.

Silver Gold Satin Stainless Steel Brown BronzePolished Stainless Steel

Textured Silver Polished Brass Satin Chrome RALPolished Chrome

D3

C o v e r D e s i g n s

• New style cover for use on Chubb range of closers.• Metal construction, fixing via backplate.

• Metal construction cover for use on Chubb range of closers.• Fixing via backplate.

New Wave Cover (NW)

Standard Cover (STD)

• Silver • Red RAL 3003

• Gold • Dark Red RAL 3005

• Satin Stainless Steel • Green RAL 6016

• Polished Stainless Steel • Yellow RAL 1004

• Brown Bronze • Light Grey RAL 7036

• Textured Silver • Dark Grey RAL 7043

• Polished Brass • Black RAL 9005

• Satin Chrome • White RAL 9016

• Polished Chrome • Blue RAL 5002

• Brown RAL 8017 • Dark Blue RAL 5003

Finishes

66mm

285mm

68mm

66mm

285mm

52mm

//////////////////

D4Note: Examples of covers are shown throughout the catalogue.

Power Adj. Adj. Backcheck Delayed Hold ArmSize Latch Sweep Action Open

New Standard Wave (STD)(NW)

Features & FunctionsCover Designs Finishes

2/3 ● ● 1, 61, 66

3 ● ● 1, 61, 66

1/2/3/4 ● ● ● O 1, 61, 66

1/2/3/4 ● ● ● ● O 1, 61, 66

1/2/3/4 ● ● ● ● ST

2/3/4 ● ● O 1, 61, 66

3/4 ● ● O O 1, 61, 66

2/3/4/5 ● ● O O O 1, 61, 66

3/4/5/6 ● ● ● 1, 61, 66

3/4/5/6 ● ● ● O ST

2/3/4 ● ● ● O –

● 10

● 10

● 10

● 10

● 10

● 10

● 10

● 10

● 10

● 10

10

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

N/A N/A

●

● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ●

●

S G SSS PSS BB PB SC PC RAL


Fixed Power

Power Adjustable

Fixed Power

C1000

C2003

C2501BCM

C2501DLM

C2511BCM

C2600

C2700

C2800

C2900

C3000

C3100

Security Features

Standards

Fire

Re

sita

ntsion

si

stan

t

Gua

rant

ee

Power Adjustable

Power Adjustable

Transom Concealed

Power Adjustable

BS EN 1154

Key: ST = Slide Track O = Optional Finishes: S = Silver G = Gold SSS = Satin Stainless Steel PSS = Polished Stainless Steel BE = Brown Bronze TS = Textured Silver PB = Polished Brass SC = Satin Chrome PC = Polished Chrome RAL = Various RAL Colours.

* When ordering Door Closers please suffix Pattern Number with Cover Design ie New Wave (NW) or Standard (STD) and Finish.

//////////////////////

TS

44 8 1 1 04 8 1 1 0

1

44 8 1 1 04 8 1 1 0

1

44 8 1 1 04 8 1 1 0

1

44 8 1 1 44 8 1 1

2

44 8 1 1 44 8 1 1

3

54 8 1 1 34 8 1 1

2

D5

3 8 4 0 1 4

3 8 3 0 1 4

3 8 2 0 1 4


• Surface mounted overhead door closer for single action doors.• Fixed power: BS EN 1154 spring size 2/3.• 180˚ angle of opening.• Screw adjustable armset.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Suitable for both left and right handed doors opening either in or out.• Independent adjustable sweep and latch valves.• Tested for durability to 100,000 cycles.

• Surface mounted overhead door closer for single action doors.• Fixed power: BS EN 1154 size 3.• 180˚ angle of opening.• Universal fitting - 1 regular, 61 transom, and 66 parallel

arm mount.• Suitable for both left and right handed doors opening either

in or out.• Independent adjustable sweep and latch valves.

F ixed Power

Fixed Power C1000 C2003

Security Features

Standards

●

10

●

10

Power 2/3 3

Latch ● ●

Sweep ● ●

Backcheck

Delay

Hold Open

Arm 1, 61, 66 1, 61, 66

New Wave ●

Standard ●

Finish Options


Covers

Guarantee

Fire Resistant

C1000

C2003

BS EN 1154

219mm 49mm

44mm

38mm

40mm

210mm

Silver ● ●

Gold ●

Satin Stainless Steel ●

Polished Stainless Steel ●

Brown Bronze ●

Textured Silver ●

Polished Brass ●

Satin Chrome ●

Polished Chrome ●

RAL ●

D6


• Surface mounted overhead door closer for single action doors.• Successfully type-tested for conformity to all the requirements of BS EN 1154.• Adjustable power: BS EN 1154 size 1/2/3/4.• 180˚ angle of opening.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Suitable for both left and right handed doors opening either in or out.• Backcheck as standard.• Independent adjustable sweep and latch valves.• Adjustable hold open arm optional.• Optional slide adjustable armset.• Delayed action variant available (C2501DLM).

• Surface mounted overhead door closer for single action doors.• Successfully type-tested for conformity to all the requirements

of BS EN 1154.• Adjustable power: BS EN 1154 size 2/3/4.• 180˚ angle of opening.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Suitable for both left and right handed doors opening either in or out.• Independent adjustable sweep and latch valves.• Adjustable hold open arm optional.• Closer uses Dorma Power Unit TS72.

Power Adjustable

Power AdjustableC2600 Using Dorma Power Unit

C2501BCM • C2501DLM • C2511BCM

BS EN 1154

BS EN 1154

C2501BCM C2511BCM C2600C2501DLM

Security Features

Standards

●

10

●

10

●

10

Power 1/2/3/4 1/2/3/4 2/3/4

Latch ● ● ●

Sweep ● ● ●

Backcheck ● ●

Delay ● (DLM)

Hold Open O ● O

Arm 1, 61, 66 ST 1, 61, 66

New Wave ● ● ●

Standard ● ● ●

Silver ● ● ●

Gold ● ● ●

Satin Stainless Steel ● ● ●

Polished Stainless Steel ● ● ●

Brown Bronze ● ● ●

Textured Silver ● ● ●

Polished Brass ● ● ●

Satin Chrome ● ● ●

Polished Chrome ● ● ●

RAL ● ● ●

Finish Options


Covers

Guarantee

Fire Resistant

255 - 370mm

47.5mm

69mm

223mm

219mm 49mm

44mm

BS EN 1154 44 8 1 1 04 8 1 1 0

14

4 8 1 1 04 8 1 1 01

44 8 1 1 4

2

D7


Power Adjustable

Power Adjustable

• Surface mounted overhead door closer for single action doors.• Successfully type-tested for conformity to all the requirements of BS EN 1154.• Adjustable power: BS EN 1154 size 3/4.• 180˚ angle of opening.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Suitable for both left and right handed doors opening either in or out.• Independent adjustable sweep and latch valves.• Screw adjustable armset.• Adjustable hold open arm optional.• Delayed action available (C2700DL).• Closer uses Dorma Power Unit TS73N.

• Surface mounted overhead door closer for single action doors.• Successfully type-tested for conformity to all the requirements of BS EN 1154.• Adjustable power: BS EN 1154 size 2/3/4/5.• 180˚ angle of opening.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Suitable for both left and right handed doors opening either in or out.• Independent adjustable sweep and latch valves.• Backcheck as option available.• Adjustable hold open arm optional.• Optional slide arm.• Closer uses Jebron Power Unit 9900.

C2700 Using Dorma Power Unit

C2800 Using Jebron Power Unit

BS EN 1154

BS EN 1154

C2700 C2800

Security Features

Standards

●

10

●

10

Power 3/4 2/3/4/5

Latch ● ●

Sweep ● ●

Backcheck O (C2800BC)

Delay O (C2700DL) O (C2800DL)

Hold Open O O (C2800HO)

Arm 1, 61, 66 1, 61, 66

New Wave ● ●

Standard ● ●

Silver ● ●

Gold ● ●

Satin Stainless Steel ● ●

Polished Stainless Steel ● ●

Brown Bronze ● ●

Textured Silver ● ●

Polished Brass ● ●

Satin Chrome ● ●

Polished Chrome ● ●

RAL ● ●

Finish Options


Covers

Guarantee

Fire Resistant

255 - 370mm

42.5mm

60mm

208mm

55mm

92mm

60mm

260mm

269mm

BS EN 11544

4 8 1 1 44 8 1 13

54 8 1 1 34 8 1 1

2

D8


Power Adjustable

• Surface mounted overhead door closer for single action doors.

• To DIN 18263, Part 2.

• Adjustable power: BS EN 1154 size 3/4/5/6.

• 180˚ angle of opening.

• Slide track arm as standard.

• Suitable for both left and right handed doors opening either in or out.

• Independent adjustable sweep, latch and backcheck valves.

• Variant with delayed action available.

• Electro-mag variant available.

• Electro-mag and smoke detector variant available.

C3000

Security Features

Standards

●

10

●

10

Power 3/4/5/6 3/4/5/6

Latch ● ●

Sweep ● ●

Backcheck ● ●

Delay O

Hold Open

Arm 1, 61, 66 ST

New Wave ● ●

Standard ● ●

Silver ● ●

Gold ● ●








RAL ● ●

Finish Options


Covers

Guarantee

Fire Resistant

285mm

510mm

39mm

52mm

102mm

66mm

32mm

Power Adjustable

• Surface mounted overhead door closer for single action doors.

• To DIN 18263, Part 2.

• Adjustable power: BS EN 1154 size 3/4/5/6.

• 180˚ angle of opening.

• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.

• Suitable for both left and right handed doors opening either in or out.

• Independent adjustable sweep and latch valves.

C2900

C2900 C3000

32mm

102mm

66mm

285mm52mm

BS EN 1154

D9


Security Features

Standards

10

Power 2 - 4

Latch ●

Sweep ●

Backcheck ●

Delay

Hold Open O

Arm

New Wave N/A

Standard N/A

Silver ●

Gold

Satin Stainless Steel

Polished Stainless Steel

Brown Bronze

Textured Silver

Polished Brass

Satin Chrome

Polished Chrome

RAL

Finish Options


Covers

Guarantee

Fire Resistant

Transom Concealed

• Transom concealed door closer.• Suitable for single and double action doors.• Fully controlled closing with adjustable speed.• Adjustable final closing.• Progressive mechanical backstop.• Door opening angle max. 130° on both sides.• Hold-open points - depending on model (optional) 105° or 90°.• Closer uses Dorma RTS85 Power Unit.

C3100 Using Dorma Power Unit

C3100

Closing Force Size 2 3 4

Spring Strength (Nm) 20 30 40

BS EN 1154

70mm

84mm

73mm

56.5mm

38.5mm

94mm

250mm

328.5mm20.5mm

C3100

Notes

Accessories for double action and centre pivoted single actiondoors (70mm pivot point)

Side Load Installation (SL) End Load Installation (EL)

1 Closer arm with arm channel C3110AC-SL C3110AC-EL2 Closer arm with angle bracket C3120AB-SL C3120AB-EL3 Floor pivot set, total height 27mm C3127FP-SL C3127FP-EL

Floor pivot set, total height 57mm C3157FP-SL C3157FP-EL4 Threshhold pivot set - channel depth 25mm C3125PS-SL C3125PS-EL

Threshhold pivot set - channel depth 40mm C3140PS-SL

BS EN 1154

D10

3 8 4 0 1 4

3 8 3 0 1 4

3 8 2 0 1 4

E l e c t r o - M a g C l o s e r s


Where do i use an Electromagnetic Closer ?

To hold open fire doors where linked to a suitable fire alarm system. Wherethe power source is cut off when the alarm is triggered the fIre door fittedwith a standard door closer is released as the de-energised magnet and thedoor shuts automatically.

This standard classifies electrically powered hold-open devices using a 6 digit codingsystem. Each digit relates to a particular feature of the product measured against thestandards performance requirements.

Digit 1 - Category of use • Grade 3: For doors for use by the public.

Digit 2 - Durability • Grade 5: 50,000 test cycles completed for electrically powered hold-open devices.

• Grade 8: 500,000 test cycles completed for electrically powered hold-open and free swing door closers and devices that contain operating arms.

Digit 3 - Test door mass/size Five grades and related hold-open power sizes are identified as shown in the table below.Where a closer provides a range of power sizes both the minimum and maximum sizes shall be shown.

Digit 4 - Fire resistance • Grade 1: Suitable for use on fire/smoke doors. This is assessed outside of BS EN 1155.



ExampleThe following marking denotes a separatehold-open device power size 4 with highresistance to corrosion, which is suitable for use on fire/smoke doors.

3 5 4 1 1 3

Hold-open Test door Recommended doorpower size mass Kg leaf width mm.

3 60 9504 80 11005 100 12506 120 14007 160 1600

Test door mass/size

Finishes: Silver Gold Satin Stainless Steel Brown BronzePolished Stainless Steel

Textured Silver Polished Brass Satin Chrome RALPolished Chrome

For a description of door closer actionssee page D3.

Covers

Two cover designs areavailable in a wide choice ofarchitectural finishes.

D11



Door Closer Actions

Normal Opening Backcheck

DelaySweep

Latch


Electro-Mag Closers

Page

D14C3400EM Page

D14C3200EM Page

D13

C3200EM

C3300EM

C3400EM

C3510G for wall and floorfixing

C3550G for wall and floorfixing

C3510U for concealed fixing

C3550U for concealed fixing

C3510A with test push button

C3550A with test push button


New Standard Wave

Features & FunctionsCovers Finishes

2/3/4/5 ● ● ● O ST

3/4 ● ● O 1, 61, 66

4 ● ● ● 1, 61, 66

N/A N/A N/A N/A N/A N/A N/A






● 10

● 10

● 10

10

10

10

10

10

10

● ●

● ●

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ●

● ●


Electro-Mag Closers

Electro-Mag Closers

Electro-Mag Closers

Security Features

Standards

Fire

Re

sita

ntsion

si

stan

t

Gua

rant

ee

BS EN 1155

C3510/50C3300EM Page

D13

S G SSS PSS BB PB SC PC RAL//////////////////////

TS

Key: O = Optional Finishes: S = Silver G = Gold SSS = Satin Stainless Steel PSS = Polished Stainless Steel BE = Brown Bronze TS = Textured Silver PB = Polished Brass SC = Satin Chrome PC = Polished Chrome RAL = Various RAL Colours.

43 8 1 1 3

3

D12

4 8 4 1 1 4


Electro-Mag

Electro-Mag

• Successfully type-tested for conformity to all the requirements of BS EN 1155.• Hold-open and free swing door control.• Fixed power BS EN 3/4.• Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount.• Non-handed.• Latch and closing speed control.• Hold-open from 70° to 180°.• Closer uses Jebron Power Unit 9870.

• As C3000 except for:

• C3200-EM with electro-magnetic brake stay.

• C3200EM-R with electro-magnetic brake stay and integrated smoke detector

with mains receiver.

C3300EM Using Jebron Power Unit

C3200EM

BS EN 1155

Security Features

Standards

●

10

●

10

Power 2/3/4/5 3/4

Latch ● ●

Sweep ● ●

Backcheck ●

Delay O

Hold Open O

Arm ST 1, 61, 66

New Wave ● ●

Standard ● ●

Silver ● ●

Gold ● ●








RAL ● ●

Finish Options


Covers

Guarantee

Fire Resistant

55mm

92mm

60mm

260mm

269mm

285mm

510mm

52mm

39mm

66mm

32mm

C3200EM C3300EM

102mm

BS EN 11554

3 8 1 1 33

D13


Electro-Mag

Magnets

• Combination of hydraulic door closer and electro-magnetic hold-open.

• Door hold-open at opening angles between 75° and 180°.

• Suitable for standard doors up to 1250 mm.

• Complies with DIN 18263 for fire doors up to 1125 mm.

• Optional free-swing arm assembly.

• Closer uses Dorma Power

Unit TS73EMF.

• C3510G, C3550G for wall and floor fixing.• C3510U, C3550U for concealed fixing.• C3510A, C3550A with test push button.• Complete with polarity reversal protection.• For floor fixing use floor bracket (supplied as accessory).• Protector category: IP40, C3510A. C355OA in conjunction

with floor bracket: IP43.• Power input: 1.5 W.• Holding Force:

• The hold-open can also be released by simply giving thedoor a sharp tug in the closing direction (100Nm only).

• Magnetic armature plates:- CMAG ball jointed, self adjusting to the door opening angle.- CMAT telescopic, for relatively large distances between wall

and door. Length of travel approx. 20mm.- CMAW, for extreme angles. Adjustment range ±60°.

C3400EM Using Dorma Power Unit

C3500 Range from Dorma for Fire Prevention

Security Features

Standards

●

10

Power 4

Latch ●

Sweep ●

Backcheck

Delay

Hold Open ●

Arm 1, 61, 66

Standard N/A

New Wave N/A

Silver ●

Gold ●

Satin Stainless Steel


Brown Bronze

Textured Silver

Polished Brass

Satin Chrome

Polished Chrome

RAL

Finish Options


Covers

Guarantee

Fire Resistant

500 Nm C3550G, C3550U, C3550A100 Nm C3510G, C3510U, C3510A

BS EN 1155

60mm

45.5mm

293mm

C3400EM

C3510GC3550G

C3510UC3550U

C3510AC3550A

CMAG CMAT CMAW

BS EN 1155

D14

4 8 4 1 1 4

F l o o r s p r i n g s


Single / Double Swing Floor Springs

• Floor mounted door control for single /double swing applications.

• Successfully type-tested for conformity to all the requirements of BS EN 1154.

Cement Box

Adjustable.

Interchangeable Spindles

Site interchangeable forease of installation.

Adjustable Delayed Action (3)

Selective between180° and 70° (C3700FS)105° and 75° (C3600FS).

Hydraulic Closing

2 speed action fromapproximately 180°.

Backcheck (2)

Mechanical backcheckat approx 85° and 165°.

Closing Speeds (1)

15 or 28 Nm (C3700FS)15, 32 or 53 Nm (C3600FS).

Optional Hold Open (3)

90° standard hold open(C3700FS) between 75° and175° (C3600FS).

Universal Fitting

Suitable for left or right hand singleaction and centre pivoted double actiondoors.

This standard classifies door closers using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standards performancerequirements.

Digit 1 - Category of use • Grade 3: For closing doors from at least 105˚.• Grade 4: For closing doors from 180˚ open.

Digit 2 - Durability • Grade 8: 500,000 test cycles completed.

Digit 3 - Test door mass/size Seven grades are identified as shown in the table below where a closer provides a range of power sizes both the minimum and maximum sizes shall be shown.

Digit 4 - Fire behaviour • Grade 0: Not suitable for use on fire/smoke doors.• Grade 1: Suitable for use on fire/smoke doors.

This is assessed outside of BS EN 1154.



ExampleThe following marking denotes a closer capable of opening to at least 105˚, with a power size of 3, which is suitable for use on fire/smoke doors.


3 8 3 1 1 0

Test door mass/size

Door Closer Test door Recommended doorpower size mass Kg leaf width mm.

1 20 7502 40 8503 60 9504 80 11005 100 12506 120 14007 160 1600

Test door mass/size


Electromagnetic Action

Variants available.

Single Swing Components Double Swing Components

Finishes: Polished Brass Satin Stainless Steel Polished Stainless Steel

Electromagnetic Action (4)

Variants available.

Universal Cover Plate

Adjustable for right or left handsingle hand applications.

Floorspring Actions

D15

Floorspr ings

C3600FS Page

D17 C3600EM-FS Page

D17 C3700FS Page

D18 C3800FS • C3900FS Page

D18


C3600FS

C3600EM-FS

C3700FS

C3700FS (Hold Open)

C3800FS

C3900FS


New StandardWave

Features & FunctionsCovers Finishes

4 ● ● ● ● ● n/a

4 ● ● ● ● n/a

1 - 4 ● ● ● n/a

5 - 7 ● ● ● ● n/a

1 - 4 ● ● ● O n/a

4 ● ● ● O n/a

10

● 10

● 10

10

● 10

● 10

n/a n/a

n/a n/a

n/a n/a

n/a n/a

n/a n/a

n/a n/a

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●


Floorspr ings

Floorspr ings

SecurityFeatures

Standards

Fire

Re

sita

nt

osio

n

Resi

stan

t

Gua

rant

ee

BS EN 1154

S G SSS PSS BB PB SC PC RAL//////////////////////

TS

43 8 1 1 4

1

73 8 0 1 4

5

43 8 1 1 3

1

3 8 4 1 1 3

3 8 4 0 1 4

4 8 4 1 1 4

D16

(BS EN 1155)


Floorspr ings

Electro-Mag Floorspr ing

• Universal Floorspring for all types of standard doors.• Fixed power: BS EN 4.• Non-handed model.• Adjustable closing speed, (15, 32 or 53Nm).• Mechanical backcheck.• Adjustable latching action.• Floorspring uses Dorma Power Unit BTS80.

• Complete with electro-hydraulic hold-open.• Enables fire and smoke check doors to be held open at

opening angles between approx. 75° and 175° with onlyvery slight fall-back.

• In the event of an alarm or power failure, the hold-openis released and the door closer closes the door.

• The hold-open can also be released by simply giving thedoor a sharp tug in the closing direction.

• Floorspring uses Dorma Power Unit BTS80EMB.

C3600FS Using Dorma Power Unit

C3600EM-FS Using Dorma Power Unit

Security Features

Standards

10

10

●

10

10

Power 4 4

Latch ● ●

Sweep ● ●

Backcheck ● ●

Delay ●

Hold Open ● ●

Arm n/a n/a

New wave n/a n/a

Standard n/a n/a

Finish Options


Covers

Guarantee

Fire Resistant

BS EN 1154

60mm

78mm

341mm

60mm

78mm

341mm

C3600FS C3600EM-FS

Silver

Gold



Brown Bronze

Textured Silver


Satin Chrome

Polished Chrome

RAL

D17

3 8 4 0 1 4 4 8 4 1 1 4(BS EN 1155)


Floorspr ings

Accessor ies

• Ideal for all single and double action doors with widths of up to 1100mm.• Adjustable screw for easy setting of the closing force.• Variable power: BS EN 1 - 4.• Non-handed model.• Adjustable closing speed, (15 or 28Nm).• Mechanical backcheck.• Optional variant with 90° or 105° hold-open available.• Floorspring uses Dorma Power Unit BTS75V.

Double Action Accessories for Steel, Aluminium and Timber Doors

• Double action top centre. No. C3610DTC

• Cover plate. No. C3620CP

• Double action bottom strap, for door weights up to 300kg. No. C3630DAS

C3700FS Using Dorma Power Unit

Accessories for C3600, C3700 Ranges

50mm

82mm

275mm

Security Features

Standards

●

10

10 10

Power 1 - 4

Latch ●

Sweep ●

Backcheck ●

Delay

Hold Open

Arm n/a

New wave n/a

Standard n/a

Finish Options


Covers

Guarantee

Fire Resistant

BS EN 1155

C3700FS

Accessories for Single Action Timber Doors, for Flush Closing Doors

• Single action top centre, non-handed. No. C3640STC

• Single action door straps. No. C3650SDS

• Standard spindles up to + 50mmavailable on request. Silver

Gold

Satin Stainless Steel ●

Polished Stainless Steel ●

Brown Bronze

Textured Silver

Polished Brass ●

Satin Chrome

Polished Chrome

RAL

43 8 1 1 4

1

D18

105mm

50mm

105mm

307mm


Floorspr ing

Electro-Mag Floorspr ing

• Manually operated universal floorspring for double swingand single swing applications.

• Variable power: BS EN 1 - 4.• Non-handed model 180° opening.• Adjustable closing speed.• Backcheck at 90°.• Floorspring uses Jebron

Power Unit 2950.

• Electro-magnetic floorspring.

As C3800FS but with the following additions:

- Alarm activated electro-magnetic hold-open, with size 4 power.

- Supplied with 1m conduit and 3m flexible cable complete

with connections.

- Operating voltage: 24.V.dc power consumption 2.0w.

- Not suitable for external or wet area applications.

Accessories: Suitable for both C3800FS and C3800EM-FS• Double action top centre, SS or PB finishes - C3810DTC

• Cover plates, SS or PB finishes - C3820CP.

• Double action strap, zinc plated - C3830DAS.

• Single action top centre, SS or PB finishes - C3840STC.

• Single action strap and cover, SS or PB finishes - C3850SAC.

C3800FS Using Jebron Power Unit

C3800EM-FS

Security Features

Standards

●

10

10

●

10

10

Power 1 - 4 4

Latch ● ●

Sweep ● ●

Backcheck ● ●

Delay O O

Hold Open

Arm n/a n/a

New wave n/a n/a

Standard n/a n/a

Finish Options


Covers

Guarantee

Fire Resistant

EN1155

C3800FS C3800EM-FS

105mm

50mm

105mm

307mm

Universal Cover Plate

Single Swing

Double Swing

Series Unit

Spindles 5 - 50mmS5 S10 S20 S30 S40 S50

CementBox

FP/SL

Silver

Gold



Brown Bronze

Textured Silver


Satin Chrome

Polished Chrome

RAL

43 8 1 1 3

13 8 4 1 1 3

D19

A u t o m a t i c D o o r S y s t e m s

Typical Appl icat ions

What Type of Door?

Straight Curved Automatic Low Energy Folding Swivelling

D20

Sliding Doors Swing Doors Space Saving DoorsIn association with Dorma, Chubb are pleasedto offer the supply and installation of:

• Automatic door operators and complete door packages

• Revolving doors

• Glass partition and door systems

Why specify automatic doors?

• Aesthetically pleasing and inviting modern entrance.

• Improved access for all door users.

• Easy access for those with young children, pushing prams, pushchairs etc.

• Unhindered access and increased independence for people with walking difficulties, elderly people and disabled people.

• Option of controlled access via remote operation.

• Option of secure access via cardswipe, numeric keypad etc.

What about safety?

All DORMA automatic doors come withcomprehensive safety systems as standard toensure that the doors open and close safely atall times. All DORMA installations are CEcertified and are carried out by our qualifiedengineers to comply with BS 7036.

What about quality?

All DORMA automatic door operators areindividually and rigorously tested beforeleaving the manufacturing plant in Ennepetal,Germany (ISO9002/BS 5750 Pt.2.) All DORMAautomatic door operators are offered with a 12month guarantee. DORMA offers acomprehensive range of maintenanceprogrammes covering automatic, manual andindustrial doors.

Straight - ES range• Available in single sliding, bi-parting or telescopic

configurations. Optional breakout safety system.Curved - BST• Individually designed from gentle curves to semi-

curves.

Automatic - ED 200 range• ED200 offers a closer with a range of arm types.• ED200i offers a concealed closer with no arm.Low Energy - ED800• Offers assisted opening of swing doors.• Ideal for use by elderly or disabled people.

Folding - FFT• Ideal for a restricted opening or awkward layout.Swivelling - RST• Unique swivelling action.• Combines excellent space-saving with elegant

design.

from

from

D o o r S e r v i c e a n d M a i n t e n a n c e

Brit i sh Standards

“Self closing devices should be examined at six monthly intervals to ensurethat the door is closing properly and any necessary adjustments made to theclosing and latching speeds”.

British Standard BSB214“Building Components (Ironmongery)

“To ensure safe operation, long term reliability and working efficiency, a powered doorinstallation (including safety devices and safety systems) should be:

1. Regularly maintained to the manufacturer’s specification by the powered door system authorised technician.

2. Annually inspected in accordance with the recommendations of this standard by completion of the authorised technician checklist...”

British Standard BS7036 April 1996“Safety at powered doors for pedestrian use”

from

from

Notes

Dorma offer:

• Wide selection of systems to suit your particular application.

• Maintenance for all door products.

• Nationwide coverage throughout the UK.

• Customer service telephone back-up.

• Guaranteed product.

Why is maintenance important?

Every door needs to be maintained if it is tooperate correctly and safely.

It reduces breakdowns and inconvenience.

If a preventable accident occurs you could beheld accountable.

It makes economic sense reducing the long termcost of operating the door.

Notes


D22

Notes


D23

Es

ca

pe

Ha

rd

wa

re

• S i n g l e P a n i c B o l t

• D o u b l e R e b a t e d

P a n i c S e t

• P a n i c L a t c h

• P u s h P a d L a t c h

• O u t s i d e A c c e s s D e v i c e

E s c a p e H a r d w a r e



1

2

3

4


5

6

8

9

10

11

12












7


Keying Groups Standards & Approvals

Escape HardwareIndex• Introduction




• Photo Gallery

• Range Table

• Single Panic Bolt

• Double Rebated Panic Set

• Panic Latch

• Panic Pad Latch

• Outside Access Devices

• Notes Page

E2

E3

E3

E3

E4

E4

E5

E5

E6

E6

E6

E7

Chubb offer a comprehensive range of EscapeHardware which are ideal for commercial andindustrial use.The range includes variants for single doors anddouble rebated doors as well as outside accessdevices.A comprehensive choice of finishes are available tomeet customer requirements.







For the complete range of products and theirkeying groups, see the chart in the introductionsection. 2 keys are supplied as standard, however see the

price list for any variations.


Chubb have developed a series of icons to enablethe process of product specification to be simplified.


Example 1: If you require a panic bolt for a doublerebated door that has a 10 year Guarantee, look forthe Guarantee icon (number 12) in the range tableon page 4 and then on subsequent pages wherefurther information is supplied.

Example 2: If this panic bolt then needs to provideparticular resistance to Corrosion, look for icon 8.


Key ControlPan-European standard which classifiespanic exit devices.

Pan-European standard which classifiesemergency exit devices.

Keys

E2

BS EN 1125

BS EN 179


Finishes:


Double Rebated Panic SetFor double rebated doors.

Single Panic BoltTwo point locking for singledoors.

Oval Knob Handle

Escape HardwareProducts that meet BS EN 179 (i.e. emergency exit device) should only be used where building occupants are familiar with theemergency exit and its hardware and where panic situations are not foreseen. If there is any doubt about conditions relatingto the building occupancy, then devices covered by BS EN 1125 (i.e. Panic devices) should be used.

Once the pushbar has beendepressed the bolts areheld in the open positionuntil the door is closed.

Product is suitable for left or righthand doors, (outward opening only).

Panic Pad LatchSingle point locking forsingle doors.

Push Pad LatchEmergency escape devicefor single doors.

Tamper ProtectionConcealed fixings (outside accessdevices only).

Protected SectionProduct can be used on a patented keysystem, (outside access device only).

Corrosion ResistantProducts meet Grade 3 according toEN1670.

Fire ResistantSuitable for use on fire / smoke doorassemblies.

EscapeProducts for use on escape door.

Key ControlProducts can be masterkeyed or keyedalike (outside access devices).

GuaranteeGuarantee period applicable whenused with original Chubb keys (outsideaccess devices) and maintenanceinstructions followed.

BSEN1125 Class i f icat ionThis standard classifies panic exit devices by using a 9 digit coding system. Each digit relates to aparticular feature of the product measured against the standards performance requirements.

Digit 1 - Category of use• Grade 3: High frequency use by public and others with little incentive to exercise care.

Digit 2 - Durability• Grade 6: 100,000 test cycles completed. • Grade 7: 200,000 test cycles completed.

Digit 3 - Test door mass/size• Grade 5: Up to 100kg. • Grade 6: Up to 200kg.

Digit 4 - Fire behaviour• Grade 0: Not approved for use on fire/smoke door assemblies.• Grade 1: Suitable for use on fire/smoke door assemblies. This is assessed outside of EN1125.

Digit 5 - Safety• Grade 1: All exit devices are required to satisfy the essential requirement of safety in use.

Digit 6 - Corrosion resistanceTwo grades are identified according to EN1670.

• Grade 3: High resistance. • Grade 4: Very high resistance.

Digit 7 - Security• Grade 2 Panic devices are primarily for the operation of a door from the inside. Safety

considerations will always be given priority over security.

Digit 8 - Projection of device• Grade 1: Projection up to 150mm (standard). • Grade 2: Projection up to 100mm (low projection).

Digit 9 - Type of device• Type A: Panic device with push bar operation. • Type B: Panic device with touch bar operation.

ExampleThe following marking denotes a panic exit device tested to 200,000 operations for a door mass up to 200kg. Suitable for fire door use with high corrosion resistance and low push bar projection.

BSEN179 Class i f icat ion

Digit 4 - Fire behaviour• Grade 1: Suitable for use on fire/smoke door assemblies. This is assessed outside of EN179.

Digit 7 - SecurityDevices to provide resistance to: • Grade 2: 1,000N. • Grade 3: 2,000N. • Grade 4: 3,000N.

Digit 9 - Type of device• Type A: Emergency device with lever handle operation.• Type B: Emergency device with push pad operation.

ExampleThe following marking denotes an emergency exit device tested to 200,000 operations for a door mass up to 200kg. Suitable for fire door use with high corrosion resistance and low push bar projection.

3 7 6 1 1 4 2 2 B

3 7 6 1 1 3 2 2 BSilver Gold Satin Chrome Polished Chrome RALPolished Brass

Square Knob Handle

Types of Escape Hardware

Outside Access Devices

Dogging

Universal Handing

Classification for BS EN 179 as BS EN 1125 above with the exception of points below.

E3

//////////////////Textured Silver


C801 Page

E5Page

E6Page

E6C802 Page

E5 C803 Page

E6 C805 • C806C804

Escape Hardware

Universal ‘Dogging’ Rebated Handed Doors

Features & Functions Finishes

n/a n/a ● ● ● n/a 10

n/a n/a ● ● n/a 10

n/a n/a ● ● ● n/a 10

n/a n/a ● ● ● n/a 10

O ● ● ● A 10

O ● ● ● A 10

Silver GoldPolished

BrassSatin

ChromePolishedChrome

RAL


Single Panic Bolt

Panic Latch

C801

C802

C803

C804

C805C806

Security Features

Standards

Esca

pe

Gua

rant

ee

Fire

Re

sita

nt

Prot

ecte

d S

ecti

onTa

mpe

r Re

sist

ant

Key

Cont

rol

Corr

osio

n

resi

stan

t

Push Pad Latch

Outs ide Access Devices

●

●

●

●

●

●

●

● ●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

BS EN1125 BS EN179

3 7 6 1 1 3 2 2 A

3 7 6 0 1 3 2 2 A

3 7 6 1 1 3 2 2 A

3 7 6 1 1 3 4 2 B

Double Rebated Panic Set

Key: A = Masterkey GroupingE4

/////////////////////////////TeturedSilver

Corrosionresistant


• Suitable for outward opening doors.• Suitable for timber and metal doors.• Non-handed for maximum flexibility.• Can be operated from outside with outside

access device.• Self adjusting trip action device.• 20mm top and bottom bolt throw.

• Suitable for use on double rebated outward opening doors.• Suitable for timber and metal doors.• Non-handed for maximum flexibility.• Can be operated from outside with outside access device.• Self adjusting trip action device.

S ingle Panic BoltC801

Double Rebated Panic SetC802

//////////////////////////////////

C801 C802

Security Features

Standards

Universal Handed ● ●

‘Dogging’ ● ●

Rebated Doors ●

Finishes


KeyControl

Escape

Fire Resistant

Guarantee

TamperResistant

ProtectedSection

Silver ● ●

Gold ● ●





RAL ● ●

BS EN 1125

BS EN 179

n/a

n/a

●

●

●

n/a

10

n/a

n/a

●

●

n/a

10

2440mm

55mm

155mm

840mm

98mm

2440

mm

55mm55mm

155mm

98mm

55mm

840mm 840mm

E5

3 7 6 1 1 3 2 2 A 3 7 6 0 1 3 2 2 A


• Suitable for outward opening doors.• Suitable for timber and metal doors.• Non-handed for maximum flexibility.• Can be operated from outside with outside access device.

• Suitable for outward opening doors.• Suitable for timber and metal doors.• Non-handed for maximum flexibility.• Can be operated from outside with outside access

device.

• Non-handed for maximum flexibility.• Oval knob handle for easy operation.• Suitable for use with C801, C802, C803, and C804.• Concealed fixing.

• Non-handed for maximum flexibility.• Square style knob handle for easy operation.• Suitable for use with C801, C802, C803, and C804.• Concealed fixing.

Panic Latch Panic Pad LatchC803

Outside Access DeviceC805 C806

55mm

155mm

55mm

840mm 98mm

55mm

155mm

60mm 29mm

136mm

78mm

60mm

136mm

74mm

32mm

C804

E6

Security Features

Standards

Finish Options

Corrosionresistant

//////////////////////////////////

C803 C804 C805 C806

Security Features

Standards

Universal Handed ● ● ● ●

‘Dogging’

Rebated Doors

Finishes


KeyControl

Escape

Fire Resistant

Guarantee

TamperResistant

ProtectedSection

Silver ● ● ● ●

Gold ● ● ● ●

Textured Silver ● ● ● ●

Polished Brass ● ● ● ●

Satin Chrome ● ● ● ●

Polished Chrome ● ● ● ●

RAL ● ● ● ●

BS EN 1125

BS EN 179

n/a

n/a

●

●

●

n/a

10

n/a

n/a

●

●

●

n/a

10

●

●

●

●

A

10

●

●

●

●

A

10

3 7 6 1 1 3 2 2 A

3 7 6 1 1 3 4 2 B

H i n g e s

Hin

ge

s• B r a s s

• S t a i n l e s s S t e e l

• Z i n c P l a t e d

• E l e c t r o B r a s s e d

• C o l o u r C o a t e d

H2


Introduct ion How to SpecifyHinges Index

• Introduction

• BS7352: 1990

• Features & Functions

• Photo Gallery

• Range Table

• Product Details

• Notes

H2

H3

H3

H4

H5

H6-9

H10-11

Chubb offer a comprehensive range of hingesfor both architectural specification andresidential use.

These include Steel, Stainless Steel, Brass andheavy duty variants to suit various weights ofdoors.


Chubb have developed a series of icons to enable theprocess of product specification to be simplified.

From today you can specifically detail yourrequirements for a product, therefore ensuring that itincludes particular security features.

Example:

1) If you require a hinge that conforms to BS7352,simply check the standards column to see whichgrades are available.

2) If this hinge then needs to provide particularresistance to fire, look for icon number 9.


H i n g e s

Security Features

1

2

3

4


5

6

8

9

10

11

12







Fire ResistantProducts conform to appropriate fire test requirements.





7

Standards & ApprovalsProducts endorsed with the Kitemark havepassed a strict testing procedure under thecontrol of the British Standards Institution.

BS7352: 1990

H3

H i n g e s

Finishes

Features and Funct ionsBS7352:1990

• BS7352 Classification applies when 3 hinges arefitted.

• When non backcheck closers are fitted 20%must be added to the effective door weight andthe weight should be doubled when a‘backcheck’ closer is fitted.

Key

D.S.W. = Double Steel Washered

D.S.S.W. = Double Stainless Steel Washered

D.P.B.W. = Double Phosphor Bronze Washered

H.D. = Heavy Duty

Aluminium

Chrome

Dark Red RAL 3005

Black RAL 9005

Self Colour

Zinc Plate

Green RAL 6016

White RAL 9016

Polished Brass

Electro Brass

Yellow RAL 1004

Blue RAL 5002

Stainless Steel

Brown RAL 8017

Light Grey RAL 7038

Dark Blue RAL 5003


Red RAL 3003

Dark Grey RAL 7043

Classification of Hinges

ClassMax. Weight Max. Annual

of Door Operations

1 10KG 5,000

2 20KG 5,000

3 20KG 25,000

4 40KG 25,000

5 40KG 200,000

6 40KG 500,000

7 60KG 500,000

8 80KG 200,000

9 120KG 200,000

Washer Type

Pin MaterialFire Resistant Products successfully completeda fire test.

GuaranteeGuarantee period applicablewhen maintenance andinstructions followed.

The choice of material for the hinge,pin is dependant on the environmentin which the hinges are to be fitted.

Washered hinges are of ahigh grade andrecommended formedium to heavy dutyapplications.

Ball Bearing

Ball bearing hinges are ofa very high grade and arerecommended for usewith door closers andheavy duty applications

H4

H i n g e s

Self Colour Sol idDrawn Brass Butt

CH500Page

H6

CH500/1 = 1” x 3/4”CH500/2 = 11/2” x 7/8”CH500/3 = 2” x 11/8”CH500/4 = 21/2” x 13/8”CH500/5 = 3” x 15/8”CH500/6 = 4” x 23/8”CH500/7 = 4” x 25/8”CH500/8 = 4” x 3”CH500/9 = 5” x 3”CH500/10 = 6” x 3”

CH504 = 21/2”

CH512/1 =4” x 3” x 3mm

CH512/2 =4” x 4” x 3mm

CH516/1 =3” x 2” x 3mm

CH516/2 =4” x 25/8” x 3mm

Self Colour H.D.Sol id Drawn Brass Butt

CH501Page

H6

Sol id Drawn Pol i shed BrassButts c /w Screws

CH502Page

H6

Sol id Drawn P.B.Counter F lap Hinge

CH503Page

H6

Self Colour Sol id DrawnBrass Stormproof Butt

P CH504Page

H6

Sol id Drawn Pol i shed BrassPar l iament Hinge

CH505Page

H6

Self Colour D.S .W.Brass Butts

P CH506Page

H7

Pol ished Brass D.S .W. Butts

CH507Page

H7

D.P.B.W. Pol i shedBrass Butts

CH508Page

H7

D.S.S .W. AluminiumButts c /w Screws

CH509Page

H7

D.S.S .W. Pol i shedBrass Butts

CH510Page

H7

D.P.B.W. Pol i shedBrass Butts

P CH511Page

H7

4 Bal l Bear ing BrassButts c /w Screws

CH512Page

H8

Stainless Steel P la in Buttsc /w Screws

CH513Page

H8

S. Steel WasheredButts c /w Screws

P CH514Page

H8

S. Steel 2 Bal l Bear ingButt c /w Screws

CH515Page

H8

Chrome Plated D.P.B.W.Butts c /w Screws

P CH516Page

H8

Light Butts Z .P. - E .B.or Colour Coated

CH517Page

H8

Strong Butts Z .P. - E .B.or Colour Coated

CH518Page

H9

Ris ing Butt HingeZ.P. and E.B.

P CH519Page

H9

CH501/1 = 3” x 15/8”CH501/2 = 4” x 25/8”

CH502/1 = 1” x 3/4”CH502/2 = 11/2” x 7/8”CH502/3 = 2” x 11/8”CH502/4 = 21/2” x 13/8”CH502/5 = 3” x 15/8”CH502/6 = 3” x 2”CH502/7 = 4” x 25/8”

CH503 = 11/4” x 4”

CH509/1 =3” x 2” x 3mm

CH509/2 =4” x 25/8” x 3mm

CH508/1 = 3” x 2”CH508/2 = 4” x 25/8”CH508/3 = 4” x 3”CH508/4 = 4” x 4”CH508/5 = 6” x 4”

CH507/1 = 3” x 2”CH507/2 = 4” x 25/8”CH507/3 = 4” x 3”CH507/4 = 5” x 3”

CH510/1 =3” x 2” x 3mm

CH510/2 =4” x 25/8” x 3mm

CH510/3 =4” x 3” x 4mm

CH511/1 =3” x 2” x 3mm

CH511/2 =4” x 25/8” x 3.5mm

CH511/3 =4” x 3” x 4mm

CH513/1 =3” x 2” x 1.5mm

CH513/2 =4” x 3” x 2mm

CH505/1 = 4” x 2” x 4mmCH505/2 = 4” x 3” x 5mmCH505/3 = 4” x 4” x 6mm

CH515/1 =4” x 3” x 2.5mm

CH515/2 =4” x 3” x 3mm

CH506/1 = 3” x 2”CH506/2 = 4” x 25/8”CH506/3 = 4” x 3”CH506/4 = 5” x 3”

CH517/1 = 3” x 2”CH517/2 = 4” x 25/8”

CH518/1 = 3” x 2”CH518/2 = 4” x 25/8”

CH519/1 = 3” x 23/4”CH519/2 = 4” x 23/4”

CH514 =4” x 3” x 2mm

*Details of metric sizes are supplied on page H9.

CH500 Self colour solid drawn brass

CH501 Self colour heavy duty solid drawn brass

CH502 Solid drawn polished brass butts

CH503 Solid drawn polished brass counter flap hinge

CH504 Self colour solid drawn brass stormproof butt

CH505 Solid drawn polished brass parliament hinge

CH506 Self colour D.S.W. brass butts

CH507 Polished brass D.S.W. butts

CH508 Polished brass D.P.B.W. butts

CH509 D.S.S.W. Aluminium butts

CH510 D.S.S.W. Polished brass butts

CH511 D.P.B.W. Polished brass butts

CH512 4 Ball bearing pol. brass butts

CH513 Stainless Steel; plain butts

CH514 Stainless Steel washered butts

CH515 Stainless Steel 2 ball bearing butts

CH516 Chrome plated D.P.B.W. butts screws

CH517 Light butts

CH518 Strong butts

CH519 Rising butt hinge

Fire

Re

sita

nt

Gua

rant

ee

BrassPins

FinishesFeatures/ FunctionsStandards

Security Features

8

8

8

❒

❒

❒

❒

●

❒

1

1

1

1

1

1

1

1

1

1

2

2

3

2

3

3

2

1

1

1

●

●

●

●

●

●

●

●

●

●

StainlessPins

●

●

●

●

●

SteelPins

●

●

●

●

●

Handed

●

C.W.Screws

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Hinges

H i n g e s

BS7352

H5

Key: Fire Resistant - ❒ = Depending on specific variant.

D.S.W. = Double Steel Washered

D.S.S.W. = Double Stainless Steel Washered

D.P.B.W. = Double Phosphor Bronze Washered

H.D. = Heavy Duty

RALColours

SelfColour

PolishedBrass

ZincPlate

ElectroBrass

StainlessSteel

PolishedStainless

Steel

ChromePlated

Aluminium

H6

H i n g e s

Hinges CH500 CH501 CH502 CH503 CH504 CH505

Security Features

1 year

●

● ●

● ●

●

●

● ●

●

● ● ●

1 year 1 year 1 year 1 year 1 yearGuarantee

FireResitant

Features

Brass Pins

Steel Pins

Stainless pins

c/w Screws

Handed

Finishes

RAL Coloured

Self Colour

Polished Brass

Zinc Plate

Electro Brass

Stainless Steel


Chrome

Aluminium

Classification

StandardsCH500 - Self Colour Solid Drawn Brass Butt CH503 - Solid Drawn P.B. Counter Flap Hinge

Line No. A BCH500/1 1” 3/4”CH500/2 13/4” 7/8”CH500/3 2” 11/8”CH500/4 21/2” 13/8”CH500/5 3” 15/8”CH500/6 4” 23/8”CH500/7 4” 25/8”CH500/8 4” 3”CH500/9 5” 3”

CH500/10 6” 3”

Line No. A BCH503 11/4” 4”

Line No. ACH504 21/2”

Line No. A BCH501/1 3” 15/8”CH501/2 4” 25/8”.

Line No. A BCH502/1 1” 3/4”CH502/2 11/2” 7/8”CH502/3 2” 11/8”CH502/4 21/2” 13/8”CH502/5 3” 15/8”CH502/6 3” 2”CH502/7 4” 25/8”

Line No. A B CCH505/1 4” 2” 3mmCH505/2 4” 3” 5mmCH505/3 4” 4” 6mm

CH501 - Self Colour H.D. Solid Drawn Brass Butts CH504 - S.C. Solid Drawn Brass Stormproof Butt

CH502 - Solid Drawn Pol. Brass Butts c/w Screws CH505 - Solid Drawn Pol. Brass Parliament Hinge

B

A

B

A

B

AA

B

A

B

C

A

H7

H i n g e s


Security Features

1 year 1 year 1 year 1 year

❒

2 years

❒

2 years

●

●

● ●

●

● ●

●

●

●

●

●

●

8

Fire Resistant

Guarantee

Features

Brass Pins

Steel Pins

Stainless pins

c/w Screws

Handed

Finishes

RAL Coloured

Self Colour

Polished Brass

Zinc Plate

Electro Brass

Stainless Steel


Chrome

Aluminium

Classification

StandardsCH506 - Self Colour D.S.W. Brass Butts CH509 - D.S.S.W. Aluminium Butts c/w Screws

Line No. A BCH506/1 3” 2”CH506/2 4” 25/8”CH506/3 4” 3”CH506/4 5” 3”

Line No. A BCH507/1 3” 2”CH507/2 4” 25/8”CH507/3 4” 3”CH507/4 5” 3”

Line No. A BCH508/1 3” 2”CH508/2 4” 25/8”CH508/3 4” 3”CH508/4 4” 4”CH508/5 6” 4”

Line No. A B CCH511/1 3” 2” 3mmCH511/2 4” 25/8” 3.5mmCH511/3 4” 3” 4mm

Line No. A B CCH509/1 3” 2” 3mmCH509/2 4” 25/8” 3mm

Line No. A B CCH510/1 3” 2” 3mmCH510/2 4” 25/8” 3mmCH510/3 4” 3” 4mm

CH507 - Polished Brass D.S.W. Butts

B

A

B

C

C

C

A

B

A

B

A

B

A

B

A

CH510/3: Fire Tested


CH510 - D.S.S.W. Polished Brass Butts

CH508 - D.P.B.W. Polished Brass Butts CH511 - D.P.B.W. Polished Brass Butts

H8

H i n g e s


Security Features

❒

3 years

●

●

●

● ● ●

●

●

●

●

●

●

●

●

●

●

●

●

●

❒

2 years

●

3 years

❒

3 years 2 years 1 year

8 8

Fire Resistant

Guarantee

Features

Brass Pins

Steel Pins

Stainless pins

c/w Screws

Handed

Finishes

RAL Coloured

Self Colour

Polished Brass

Zinc Plate

Electro Brass

Stainless Steel


Chrome

Aluminium

Classification

StandardsCH512 - 4 Ball Bearing Brass Butts c/w Screws CH515 - S. Steel 2 Ball Bearing Butt c/w Screws

CH513 - S. Steel Plain Butts c/w Screws CH516 - Chrome Plated D.P.B.W. Butts c/w Screws

CH514 - S. Steel Washered Butts c/w Screws CH517 - Light Butts Z.P. - E.B. or Colour Coated

Line No. A B CCH512/1 4” 3” 3mmCH512/2 4” 4” 3mm

Line No. A B CCH515/1 4” 3” 2.5mmCH515/2 4” 3” 3mm

Line No. A B CCH516/1 3” 2” 3mmCH516/2 4” 25/8” 3mm

Line No. A B CCH513/1 3” 2” 1.5mmCH513/2 4” 3” 2mm

Line No. A B CCH514 4” 3” 2mm

Line No. A BCH517/1 3” 2”CH517/2 4” 25/8”.

B

C

C C

C

A

B

A

B

A

B

C

A

B

A

B

A

CH512/1: Fire Tested CH515/1: Fire Tested


CH514: Fire Tested

H9

H i n g e s

Hinges CH518 CH519

Security Features

1 year

●

●

●

●

●

●

●

●

1 year

FireResistant

Guarantee

Features

Brass Pins

Steel Pins

Stainless pins

c/w Screws

Handed

Finishes

RAL Coloured

Self Colour

Polished Brass

Zinc Plate

Electro Brass

Stainless Steel


Chrome

Aluminium

Classification

StandardsCH518 - Strong Butts Z.P. E.B. or Colour Coating CH519 - Rising Butt Hinge Z.P. and E.B.

Line No. A BCH518/1 3” 2”CH518/2 4” 25/8”.

Line No. A BCH519/1 3” 23/4”CH519/2 4” 23/4”.

B

A

B

A

CH500

CH501

CH502

CH503

CH504

CH505

CH500/1CH500/2CH500/3CH500/4CH500/5CH500/6CH500/7CH500/8CH500/9CH500/10

CH501/1CH501/2

CH502/1CH502/2CH502/3CH502/4CH502/5CH502/6CH502/7

CH503

CH504

CH505/1CH505/2CH505/3

25.4 x 19.0538.1 x 22.2250.8 x 28.5763.5 x 34.9276.2 x 41.27101.6 x 60.32101.6 x 66.67101.6 x 76.2127 x 76.2152.4 x 76.2

76.2 x 41.27101.6 x 66.67

25.4 x 19.0538.1 x 22.2250.8 x 28.5763.5 x 34.9276.2 x 41.2776.2 x 50.8101.6 x 66.67

31.75 x 101.6

63.5

101.6 x 50.8 x 4101.6 x 76.2 x 5101.6 101.6 x 6

MM

CH506

CH507

CH508

CH509

CH510

CH511

CH512

CH513

CH514

CH515

CH516

CH517

CH518

CH519

CH506/1CH506/2CH506/3CH506/4

CH507/1CH507/2CH507/3CH507/4

CH508/1CH508/2CH508/3CH508/4CH508/5

CH509/1CH509/2

CH510/1CH510/2CH510/3

CH511/1CH511/2CH511/3

CH512/1CH512/2

CH513/1CH513/2

CH514

CH515/1CH515/2

CH516/1CH516/2

CH517/1CH517/2

CH518/1CH518/2

CH519/1CH519/2

76.2 x 50.8101.6 x 66.67101.6 x 76.2127 x 76.2

76.2 x 50.8101.6 x 66.67101.6 x 76.2127 x 76.2

76.2 x 50.8101.6 x 66.67101.6 x 76.2101.6 x 101.6152.4 x 101.6

76.2 x50.8 x 3101.6 x 66.67 x 3

76.2 x 50.8 x 3101.6 x 66.67 x 3101.6 x 76.2 x 4

76.2 x 50.8 x 3101.6 x 66.67 x 3.5101.6 x 76.2 x 4

101.6 x 76.2 x 3101.6 x 101.6 x 3

76.2 x 50.8 x 1.5101.6 x 76.2 x 2

101.6 x 76.2 x 2

101.6 x 76.2 x 2.5101.6 x 76.2 x 3

76.2 x 50.8 x 3101.6 x 66.67 x 3

76.2 x 50.8101.6 x 66.67

76.2 x 50.8101.6 x 66.67

76.2 x 69.85101.6 x 69.85

MM MM

Details of metric sizes

Welcome to the Chubb CD catalogue - We hope you will find it useful.If you have not already done so, please take a minute to fill in, print and send this reply-paid form which will ensurethat you are kept up to date with future issues.

We look forward to hearing from you

Yours faithfully

Iain MacKenzieMarketing Manager

Yale Security Products UK Limited, Wood Street, Willenhall, West Midlands, England, WV13 1LATel: +44 (0) 1902 366 911 Fax: +44 (0) 1902 368 535, www.chubblocks.co.uk email: [email protected]

fold first ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

If you do not return the reply form you will not receive updates or replacements in the future.

Click on a dotted lined field below, type in the information and when complete press the Print button. Select'Current Page' in the Print dialogue box before pressing 'OK'. Fold on the lines shown, staple the bottom and post.

Your details:

Title ................ Initial ............ Surname ............................................................

Company ............................................................................................................

Position ................................................................................................................

Address ................................................................................................................

.............................................................. Town ....................................................

County ................................................ Post Code ............................................

Tel: ...................................................... Fax: ........................................................

Email: ..................................................................................................................

Chubb ® is a registered Trademark. © 2000 Yale Security Products UK Ltd. All rights reserved.

fold second ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Marketing DepartmentYale Security Products UK LimitedPO BOX 196WILLENHALLWest MidlandsWV13 1BRBUSINESS REPLY SERVICELicence No. WV 500

BUSINESS REPLY SERVICELicence No. WV 500

Staple here -------

http://www.chubblocks.co.uk

mailto:[email protected]

http://www.chubblocks.co.uk

Wood Street, Willenhall, West Midlands, United Kingdom, WV13 1LATel: +44 (0) 1902 366 911 Fax: +44 (0) 1902 368 535www.chubblocks.co.uk

C/H/00/01-1

CHUBB PRODUCT CATALOGUE v2 - Amazon S3€¦ · Chubb have trained technical staff who offer a free...

Documents

Transcript of CHUBB PRODUCT CATALOGUE v2 - Amazon S3€¦ · Chubb have trained technical staff who offer a free...