52C11829
Fire Pump SystemsFor the protection of life and property, A-C Fire Pump offers package systems that meet every fire protection need.
2
A-C Fire Pump Systems andProfessional Fire Protection...
A Shared Tradition of ExcellenceOne of the first fire trucks built in the late
1800’s was equipped with an A-C Fire Pump.
For over 80 years, A-C Fire Pump Systems
has been on the forefront in developing,
designing and custom-building a wide range
of fire pump systems including prefabricated
packages and house units that meet every fire
protection need. A-C Fire Pump is not only
rich in history, but on the cutting edge of
new technology as demonstrated with our
contribution to the fire protection systems
for launch pads 39A and 39B for NASA at the
Kennedy Space Center. A-C Fire Pump
Systems furnished a package of four 12x8x22
9100 series horizontal splitcase pumps driven
by huge 1065 horsepower diesel engines
including state-of-the-art control systems.
Each pump is rated at 3,500 gallons per
minute at 250 psi pressure. We will continue
to be the leader in the fire protection industry
providing both excellent service and superior
products for years to come. You can always
count on A-C Fire Pump Systems to solve
your pumping problems.
One of the first built firetrucks in the late 1800’s wasequipped with an A-C Fire pump.
To protect the spaceshuttle launch facilities,NASA installed a fail-safefire suppression systemutilizing A-C Fire pumps.
In-Line Pumpsn Top pullout design allows for fastand easy servicing. The rotatingelement is easily removedwithout disturbing suction anddischarge piping.
n Self-venting design eliminates theneed for an automatic air releasevalve.
n Bronze impeller is dynamically balanced and keyed direct to themotor shaft.
Capacity to 1500 GPM (5,678 L/min)Pressures to 165 PSI (116 m)Working Pressures to 150 PSI
n Space saving designn No foundation or pads required.n Suction and discharge flanges areon a common centerline, 180°apart for inline mounting in piping.
Vertical Turbine Pumpsproblem free operation.
n Open lineshaft design provides forproduct lubrication of the bearings.
n Available in electric motor or dieselengine driven configuration.
n Provided with a bronze suctionstrainer as standard.
n Provided with an oversized airrelease valve as standard.
n Available in special materials of construction for salt water applications.
Capacity to 5000 GPM (18,925 L/min)Pressures to 350 PSI (247 m)Working Pressures• up to 200 PSI with125 lb. A.S.A. flanges
• up to 550 PSI with 250 lb. A.S.A. flanges
n Required by NFPA whenoperating under a static suction liftcondition.
n Dynamically balanced impellerssecured to the shaft with steellocking collets to assure proper
End Suction PumpsCapacity to 500 GPM (1,892 L/min)Pressures to 150 PSI (106 m)Working Pressures to 250 PSI
n Top centerline discharge withfoot supported casing.• Ease of installation.• Simplifies piping layout.• Reduces problems associatedwith piping strain.
n Self-venting design eliminates theneed for automatic air release valve.
n Rear pullout design supplied as standard with spacer coupling.• Ease of maintenance,eliminates disturbing driver or piping whenremoving rotating element.
n Hydraulically balanced impellerextends bearing life and assuressmoother operation.
n Available in electric motor or diesel engine driven configuration.
8100 Seriesn Space saving design.n Available in horizontal or verticalconfiguration.
n Suction and discharge flanges areon a common centerline.
n Bearing span is kept to a minimum.n Available in electric motor driven orengine driven configuration.
n Available in clockwise orcounter-clockwise rotation tosimplify pump room layout.
Capacity to 3000 GPM (11,355 L/min)Pressures to 255 PSI (179 m)Working Pressures• up to 250 PSI (176 m) with125 lb. A.S.A. flanges
• up to 375 PSI (264 m) with 250 lb. A.S.A. flanges
9100 Seriesn Space saving design.n Suction and discharge flanges areon a common centerline.
n Dual volute casing balances radialforces on the shaft and bearings.
n Available in electric motor driven orengine driven configuration.
n Available in clockwise orcounter-clockwise rotation tosimplify pump room layout.
Capacity to 5000 GPM (18,925 L/min)Pressures to 208 PSI (146 m)Working Pressures• up to 175 PSI (123 m) with125 lb. A.S.A. flanges
• up to 255 PSI (180 m) with 250 lb. A.S.A. flanges
8200 Seriesn Bearing span is kept to a minimum.n Compact pump design.n Dual volute casing balances radialforces on the shaft and bearings.
n Available in electric motor driven orengine driven configuration.
n Two stage pump with two impellersthreaded together.
n Dynamic balanced impellers.n Available in clockwise orcounter-clockwise rotation tosimplify pump room layout.
Capacity to 1000 GPM (3,785 L/min)Pressures to 640 PSI (450 m)Working Pressures• up to 500 PSI (352 m) with250 lb. A.S.A. flanges
• up to 800 PSI (563 m) with 800 lb. A.S.A. flanges
n Space saving design.n Suction and discharge flanges areon a common centerline.
5
1
2
3
4
5
6
7
With A-C Fire Pump Systems you can restassured of start-up andfuture product supportbeing available locally,worldwide.
n Components of A-C Fire PumpSystems are labeled by one ormore of the following testing laboratories: UnderwritersLaboratories (UL), UnderwritersLaboratories Canada (ULC), Factory Mutual (FM)
n The equipment is completely manufactured at our ISO 9001facility.
n Packaged systems areperformance and hydrostaticallytested at our manufacturing facilityprior to shipment.
n Certified welding is available perASME section IX.
n Our fire pump packages have beenseismic qualification tested.
n Computer and CAD Design capabilities assist you in the design of a system custom built to your specification. Completedrawings are furnished for yourapproval prior to manufacture.
n International distribution and start up capabilities.
8
9
10
11
12
13
14
Select A-C Fire Pumps with confidence...
12
9
8
7
5
2Skid Packages
Pressure sensing lines installedper code requirements
UL Listed/FM Approved dieselengine
Flowmeter loop
Listed OS and Y valve
Listed butterfly valve
Listed main relief valve
Single point electrical connection(all electrical componentspre-wired at the factory)
Pre-piped fuel system
UL Listed FM approved fire pumpcontroller
Closed waste cone
Listed check valve
Stuffing box and engine raw water drain
UL Listed fuel tank sized per NFPA #20
UL Listed FM approved fire pump
4
1
11
5
14
10
6
13
3
1
2
3
4
5
6
House Packages
6
5
“Big House”The largest pre-packaged complete house unit ever built.
This system includes three electric motor driven fire pumps,16' x 53' and weighs 57,000 lbs.
1
4
3
6
Rigid I-beam base with optional lifting provisions.
UL Listed motor for fire protection.
Pre-fabricated house designed forspecific geographic location.
Custom engineered piping systemdesigned for project requirements.
Listed control equipment pre-wiredto job driver and power distributionpanel...one electrical connection.
Listed control valves.
2
7
We realize that each customerhas different fire protectionneeds, specific to each fire hazard. We can design a system around your needs,just like the Saturn automotiveplant...special buildings, pumpmaterials and custom floorarrangements. You need it –we’ll provide it.
Versatility –a key word at A-C Fire Pump Systems.
NFPA #20 requires the use of a vertical turbine on systems operatingunder a static suction lift conditionrequirement. A-C Fire Pump Systemsoffers the complete pre-packaged system, pump, driver, controller, low measuring device, controlvalves, check valves, sensing lines andpower distribution panel. This systemrequires one electrical connection and a water supply. It’s ready to provideimmediate, reliable fire protection.
Complete House Units pre-wired and pre-piped —instant fire suppression
n Engine combustion air intake ventn Battery operated emergency lightsn A115V thermostat control ventilating fan
n Single point power connectionn Exterior photocell sodium vapor light
n Pre-piped sprinkler systems for pump house interior
n GFCI utility electrical outlets provided
n Base is provided with optional lifting provisions
n Building heater
All A-C Fire Pumps areperformance and hydrostaticallytested in accordance with therequirements of NFPA #20 andare supplied as standard with apacked stuff box, greaselubricated bearings and castiron/bronze fitted materials ofconstruction.
For more information visit our website at www.completewatersystems.com/brands/a-c-fire-pump
Vertical TurbinePackage
Xylem Applied Water Systemsa division of Xylem Canada Company55 Royal Road, Guelph, OntarioN1H 1T1, CanadaPhone: (519) 821-1900Fax: (519) 821-5316
Package Systems
Xylem Inc.8200 N. Austin AvenueMorton Grove, Illinois 60053Phone: (847) 966-3700Fax: (847) 965-8379www.completewatersystems.com/brands/a-c-fire-pump
A-C Fire Pump is a trademark of Xylem Inc. or one of its subsidiaries.© 2012 Xylem, Inc. 52C11829 August 2004
Top Related