Page 1
Wireless Network Setup Guide for GovWiFi – PSP(English)
• Select "Settings" > "Network Settings".
• Select "Infrastructure Mode" in the "Network Settings", then press the O button to continue.
Page 2
• Select "New Connection" to set a network connection.
Page 3
-- Encrypted Connection (freegovwifi-e) Settings --
• Not Available in PSP ("Not Supported" appears after SSID scanning)
Page 4
-- Unencrypted Connection (freegovwifi) Setting --
• In the "WLAN Settings" page, select "Enter Manually" and then press the "Right" button to continue.
• In the "SSID" column, enter "freegovwifi"and then press the "Right" button to continue.
Page 5
• In the "WLAN Security Setting" page, select "None" and then press "Right" button to continue.
• In the "Address Settings" page, select "Custom" and then press "Right" button to continue.
Page 6
• In the "IP Address Setting" page, select "Automatic" and then press "Right" button to continue.
• In the "DNS Setting" page, select "Automatic"and then press "Right" button to continue.
Page 7
• In the "Proxy Server" page, select "Do Not Use" and then press "Right" button to continue.
• In the "Internet Browser" page, select "Start" and then press "Right" button to continue.
Page 8
• In the "Connection Name" column, enter "freegovwifi" and then press "Right" button to continue.
• In the "Setting List" page, all of the settings are shown. Press the "Right" button to continue if there is no problem in the settings.
Page 9
Page 10
• Press the O button to save the settings.
Page 11
-- Connect to GovWiFi --
• Encrypted o Not Applicable
• Unencrypted o In the "Select connection" page, select "freegovwifi" to connect.
o Your system will connect to the unencrypted channel "freegovwifi" automatically.
Page 12
o Your Internet browser will start automatically after the connection is finished, and then you may start using GovWiFi.
Top Related