8/10/2019 Winfrasoft Appliance Network Configuration Sheet 3.1
1/6
Network Configuration SheetBefore connecting your appliance to the network, you should note the following information:
External Adapter IP Information
The External IP address is the network adapter associated with the External network. If your Internet
service provider (ISP) has a static IP address, you can use that IP address and do not need this
information. If you are using your own external IP address or your own Domain Name System (DNS)
server, you can enter this information during setup.
Primary External adapter IP address: _______._______._______._______
Primary Subnet mask: _______._______._______._______
Additional External adapter IP address: _______._______._______._______
Additional External adapter IP address: _______._______._______._______
Additional External adapter IP address: _______._______._______._______
Default Gateway: _______._______._______._______
8/10/2019 Winfrasoft Appliance Network Configuration Sheet 3.1
2/6
Page
Internal Adapter IP Information
The Internal IP address is the network adapter associated with the Internal network.
Primary Internal adapter IP Address: _______._______._______._______
Subnet mask: _______._______._______._______
Additional Internal adapter IP address: _______._______._______._______
Additional Internal adapter IP address: _______._______._______._______
Additional Internal adapter IP address: _______._______._______._______
Default Gateway:
leave empty if used on External Connection) :
_______._______._______._______
8/10/2019 Winfrasoft Appliance Network Configuration Sheet 3.1
3/6
Page3
DMZ Adapter IP Information
You may have a perimeter network and want to connect to it. The DMZ IP address is the network
adapter associated with the DMZ. Usually, you should assign a static IP address during setup. If you
have a Dynamic Host Configuration Protocol (DHCP) server and intend to automatically assign an
IP address to your DMZ interface, you do not need to provide the address during setup. The number
of DMZ interfaces supported may vary between Appliance models.
DMZ1 adapter IP address: _______._______._______._______
DMZ1 Subnet mask: _______._______._______._______
DMZ2 adapter IP address: _______._______._______._______
DMZ2 Subnet mask: _______._______._______._______
Domain Name Service (DNS) Servers
Your appliance must be assigned DNS Servers details. You can specify remote DNS servers or use a
local DNS Server service.
Use Local DNS Server (circle): YES / NO
Preferred DNS server: _______._______._______._______
Alternate DNS server: _______._______._______._______
DNS Server Location (circle): Internal / External
Computer Name
Your appliance must be assigned a computer name. The name must be 15 characters or less.
Computer name: ____________________________________
8/10/2019 Winfrasoft Appliance Network Configuration Sheet 3.1
4/6
Page 4
Workgroup or Domain Name
You can choose to join a workgroup or a domain. By default, the appliance is a member of aworkgroup called workgroup. You can use the same workgroup name already in use on your
network, or create a new name. This name must be 15 characters or less.
Note that you can join a domain after Setup completes.
Name: _______________________________
Type (circle): Workgroup / Domain
Administrator PasswordThe administrator password is the main account which would be used to log on to the appliance.
You should change the default password as soon as possible after setting up the appliance.
The default password is: Pa55w0rd
Create an administrator password that has at least 6 characters and contains a mix of uppercase and
lowercase letters, numbers, and non-alphanumeric characters (for example, !, $, #, %).
Certificates
In certain appliance deployments, SSL certificates are required. The Winfrasoft Appliance
Configuration Wizard provides the ability for administrators to generate their own self-signed
certificates to simplify the initial deployment. Certificate names MUST match the DNS name being
used for a particular application or web site.
Enter the DNS names of required certificates here:
Certificate 1: _______________________________
Certificate 2: _______________________________
Certificate 3: _______________________________
Note
For security reasons, it is recommended that any hard copy notes taken to
memorize this password will be either destroyed as soon as possible or
stored securely.
8/10/2019 Winfrasoft Appliance Network Configuration Sheet 3.1
5/6
Page5
Serial Number & Product Key
It is highly recommended that the Appliance serial number and Windows Product key is recordedhere.
Serial Number: ____________________________________
Product Key: ____________________________________
8/10/2019 Winfrasoft Appliance Network Configuration Sheet 3.1
6/6
Page 6
Routing Table
A routing table is a set of rules, often viewed in table format, that is used to determine where datapacketstravelling over anInternet Protocol (IP) network will be directed. All IP-enabled devices,
includingroutersandswitches, use routing tables.
When an appliance has more than one network interface the Default Gateway is typically placed on
the External NIC to allow for routing to the Internet. Since there can only be one default gateway the
IP ranges used on the Internal network must be assigned in the routing table.
Network Destination Net Mask Gateway
http://searchnetworking.techtarget.com/sDefinition/0,,sid7_gci212736,00.htmlhttp://searchunifiedcommunications.techtarget.com/sDefinition/0,,sid186_gci214031,00.htmlhttp://searchnetworking.techtarget.com/sDefinition/0,,sid7_gci212924,00.htmlhttp://searchtelecom.techtarget.com/sDefinition/0,,sid103_gci213079,00.htmlhttp://searchtelecom.techtarget.com/sDefinition/0,,sid103_gci213079,00.htmlhttp://searchnetworking.techtarget.com/sDefinition/0,,sid7_gci212924,00.htmlhttp://searchunifiedcommunications.techtarget.com/sDefinition/0,,sid186_gci214031,00.htmlhttp://searchnetworking.techtarget.com/sDefinition/0,,sid7_gci212736,00.htmlTop Related