— WHITE PAPER
Predictive maintenance goes mainstream
2 PR EDIC TI V E M A INTEN A NCE GOE S M A INS TR E A M
Optimum interface
Safety and protection
Space saving
Affordable range
Easy to install
Continuous operation
Optimum interface
Safety and protection
Space saving
Affordable range
Easy to install
Continuous operation
By now, the promise of condition monitoring on critical power distribution assets is well known: reduced capex; longer asset life; avoided unplanned shutdowns; improved safety and a substantial reduction in maintenance spending. All of which adds up to reduced costs and greater reliability over time because of better asset management and predictive maintenance. Capturing operational and condition data also provides the means to identify potential problems before a failure can occur.
Why invest in condition monitoring?Lowering costs with an optimized maintenance schedule is the obvious answer but the benefits extend beyond predictive maintenance to include:
• Improving overall plant health• Spare parts management: know exactly
what you need, avoid wasting time• Reduced downtime • Increased reliability and productivity• Improved safety
Although the benefits of condition monitoring are well known, it traditionally has only been viable for larger facilities. Some smaller facilities only monitor a portion of their assets, if any, in part because the cost of a fully engineered solution is too great to justify. While large plants and institutions might invest in such tools, small to mid-sized facilities need a cost-effective solution that can be implemented easily.
Falling costs, rising adoptionNow, as sensors, communications and analytics continue to advance and their costs continue to fall, more users are moving up the condition monitoring adoption curve. Driving the trend are low-cost, cloud-connected sensors that capture real-time measurements for voltage, current, power, operational status and number of trips directly from electrical distribution equipment.
As component costs have fallen, it has become feasible to monitor, not only more assets, but also more types of assets, including those further down the control hierarchy that previously were not economical to monitor. Monitoring older equipment is also made easier or simpler by a range of available retrofit and replacement options.
— Predictive maintenance goes mainstream
Low-cost sensors, cloud-based analytics put condition monitoring and better opex spend within reach of small-medium sized facilities
—Figure 01ABB’s approach to automation and asset management
Optimum interface
Safety and protection
Space saving
Affordable range
Easy to install
Continuous operation
Optimum interface
Safety and protection
Space saving
Affordable range
Easy to install
Continuous operation
3 PR EDIC TI V E M A INTEN A NCE GOE S M A INS TR E A M
—Figure 02Predictive maintenance cycle, based on condition monitoring
—Figure 03Schematic from the EDCS system monitoring ABB’s manufacturing facility in Bergamo, Italy
How is all of this accomplished?ABB’s Emax 2 breaker is equipped with onboard sensors from the factory that feed data to ABB’s Electrical Distribution Control System (EDCS), which combines real-time operational data with circuit breaker age, utilization conditions, and real-time measurement of environmental conditions (e.g., humidity, vibration, temperature). This allows the system to create a reliability curve for each device that gives users a fine-grained picture of
each asset’s condition and likelihood of failure. This is actionable information that can be used to drive maintenance plans.
Real-time monitoring can also yield benefits for mechanical systems; for example, often a problem such as a failing bearing will cause changes in the upstream power supply. Those fluctuations can be detected by systems like EDCS and flagged for further investigation.
Optimize the service Software suggests maintenance activity including type of maintenance to perform; expert personnel and tools; and related maintenance program suggestions
Forecast the next maintenanceAlgorithms combine field data with ABB’s own data sets to predict a potential failure event
Sensors & digitalizationCollection of signals– specific sensors can improve the quality of collected data
Understand the conditionsSoftware analyzes re-al-time environmental conditions and equip-ment data to under-stand the condition of devices in the field
From signals to infoCollected data is immediately available and converted into information accessible for analytics
Process optimization & decision support
Predictive abilityData collection Monitoring & diagnosisProcessing & analysis
From connectivity to value
Note: Those highlighted in red are present on the platform in the presence of voltage from the utility the E-BusBar (priority) is connected to the D-BusBar via QF51.
When the Utility is missing, the E-BusBar will be powered by the Emer-gency Generator via QF50.
Traditional asset:All transformer switches are closed and the TRAFQs are energized.TBQF32 is open so TR3 and . The TBQF18 is closed, keeping TR1 and TR2 connected, which supply the C+D+E BusBar.
G
Main Power Center
Busbar A Busbar B Busbar C Busbar D
System Test Lab
Roof SUD
Roof NORD
3rd floor SUD2nd floor SUD1st floor SUDAuditoriumGround floor NORDCanteen
3rd floor NORD 2nd floor NORD1st floor NORDMechanical WorkshopGround floor parkingDriveway heating (Q13)
Solar Roof
From MV PW TestLab switchboard
Emergency
CED AntifireUPSsAuxilliary PWReception
External InternalEV Chargers
A/C CED
QG4 QG3 QG3 QG1
QF32
Emergency Busbar
4 PR EDIC TI V E M A INTEN A NCE GOE S M A INS TR E A M
400
350
300
250
150
100
50
0
x......
60
50
40
30
20
10
0
-10
x......
1009080706050403020100
x......—Figure 04Sample screens from ABB’s EDCS
What can we do with this data?Once the data is being captured, a host of opportunities opens up. The system can be integrated with the plant’s process control system or a building management system so that
operators can run multiple systems from a “single pane of glass.” Even without such integration, modern monitoring solutions leverage analytic and reporting functions based in the cloud to deliver decision support tools.
—Figure 05Reliability curves can be reviewed at any time
Real Time Currents Real Time Power Real Time Voltage
L1 L2 L3 P Q S
IL1(A) IL2(A) IL3(A)
84 94 69
QG1-Trafo 1 QG1-Trafo 1
QG1-Trafo 1P(KW) Q(kVAR) S(kVA)
55,0 -7,0 55,4
P(KW) S(kVA)
55,0 -7,0 55,4U23(V)U12(V) U31(V)
397 396 395
Voltage typePhase Phase
Status
Position
Operative Mode
Any Alarm
Any Trip Alarm
Frequency
Closed
Connected
Local
No Alarm
No Trip
50,0Hz
State General Parameters Maintenance Electronics Hub
E128-1250
QG1-Trafo13D102501744X010 ABB Main Active
Information
Maintenance
Documentation
Information Maintenance Settings
QG1
Ekip Touch
ASSET CONDITIONS
RELIABILITY CURVE
2015 2017 2019 2021 2023 2025 2027 2029 2031 2033 2035 2037 2039 2041 2043
19Number of operations
6,96%Average load current
8,46%Electrical life
5 PR EDIC TI V E M A INTEN A NCE GOE S M A INS TR E A M
Condition monitoring for all breakersWhile some modern circuit breakers, such as ABB’s Emax 2, are already capable of data capture, com-munications, and predictive maintenance, some are not. Luckily, retrofitting outdated equipment is fairly straightforward with a range of options. In fact, upgrading an existing circuit breaker has never been simpler or more cost effective than with the plug-and-play Ekip UP solution.
For most facilities, the cost of one avoided outage will pay for a monitoring scheme several times over, a fraction of what a fully engineered system would require. This shift in cost has allowed condition monitoring and predictive maintenance to be ap-plied to a much larger number of assets in a facility.
Partnerships are keyEventually, capabilities such as monitoring, data capture and communications will be commodified. The real value of condition monitoring systems lies in the analytics tof data from function feeds. Analyzing data streams in real time and delivering actionable intelligence to the user ultimately depends on the domain expertise and experience of the supplier. As such, it’s essential that facility managers looking to implement or expand a condition monitoring scheme on their power systems partner with suppliers that have deep roots in power engineering and automation.
With the right partner and a minimal investment, any facility—commercial, industrial, institutional—can get started with condition monitoring and begin realizing the many benefits it brings.
Interested and want to know more?
Talk with an ABB expert to learn more about this and more of these types of solutions.
http://powertalk.campaigns.abb.com/IS-ABB-Ability-Contact-Us-Form.html
abb.com
—ABB 860 Ridge Lake BlvdMemphis, TN 38120
1SX
U20
00
03W
020
1
—We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB Inc. does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.
We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents—in whole or in parts— is forbidden without prior written consent of ABB Inc. Copyright© 2020 ABB.All rights reserved.
Top Related