Languages
Pages
Legal
REVISION: 201205 DOC: 841701 ENGLISH
USER MANUAL MICROPROP DC2 USER MANUAL IN ORIGINAL
ENGLISH 2
CONTENT 1. Safety regulations 7
1.1. General 7
1.2. Check list safety 7
2. Manouvering 9
2.1. Symbols 9
2.2. Joystick Danfoss 10
2.3. Joystick Danfoss 11
2.4. Joystick L8 12
2.5. Joystick L8 13
2.6. Quick hitch 14
2.7. Track control 15
2.8. Wheel control 16
2.9. Activation Shear 17
3. Cabin module menu 18
3.1. Login to menu 18
3.2. Menu 19
3.2.1. Main 19
3.2.1. User 19
3.2.1.1. Standard 19
3.2.1.2. Multiple users 20
3.2.2. Joystick 20
3.2.2.1. Midpoint 21
3.2.2.2. Endpoints and confirmation 22
3.2.3. System 23
3.2.3.1. Backup 23
4. Calibration 24
ENGLISH 3
GENERAL This user manual is a complement to the user manuals for tiltrotators with control system Microprop DC2. The purpose of this user manual is to inform how to use Microprop DC2 in a safe way. The safety information is independent of the machine and directly derived to Microprop DC2. Aside from this user manual you shall read and understand other safety information regarding the machine and other equipment.
WARNING! Do no attempt to assemble, use or maintain the Microprop DC2 before you have read and understood all information regarding the tiltrotator, optional equipment and the machine. Be very attentive to the safety information.
Note that more safety information is found in the assembly instruction for the tiltrotator.
ENGLISH 4
SYSTEM OVERVIEW – MICROPROP DC2
TILTROTATOR
ENGLISH 5
SYSTEM OVERVIEW – MICROPROP DC2
TRACK CONTROL
ENGLISH 6
SYSTEM OVERVIEW – MICROPROP DC2
WHEEL CONTROL
SAFETY REGULATIONS
ENGLISH 7
1. SAFETY REGULATIONS
1.1. GENERAL
It is of outmost importance that you have read and understood all warnings before assembling and using the Microprop DC2 and supplied equipment. The warnings focus on potential risks and how these are avoided. If uncertain – contact your employer or supplier. Remember – with a good judgment and great knowledge of the machine many risks are sufficiently reduced. The user should therefore make time to learn how to use the tiltrotator and the other equipment in a safe way before the machine is put into service.
1.2. CHECK LIST SAFETY
WARNING! Broken or damaged equipment can cause injury or damage on persons, environment or property. Ensure that service and maintenance is made according to recommendation.
WARNING! Never attempt to increase the equipment’s maximum capacity by modifications not approved by the supplier.
WARNING! Exchange damaged and/or unreadable labels and warning signs before the machine is put into use.
WARNING! Maintenance and reparation of the electrical system may only be made by educated personnel.
SAFETY REGULATIONS
ENGLISH 8
WARNING! Risk of crushing at moving parts.
WARNING! If uncertain of knowledge, equipment or working on safety details – contact your supplier.
WARNING! Make sure that the labels are consistent to the machine function before putting the machine in use.
WARNING! Assembling and calibration may only be made by an authorized work shop. Changes in the assembly may not be made without the manufacturer’s consent.
MANOUVERING
ENGLISH 9
2. MANOUVERING
2.1. SYMBOLS
Symbol Function Symbol Function
Rotation
Tilt
Rotation clockwise
Rotation counter-clockwise
Tilt left
Tilt right
Shift between rotation and grab
Shift between tilt and extra 2
Shift between tilt and grab
Shift between rotation and extra 2
Quick hitch
Menu login
Rotation/turn right
Rotation/turn left
Forward
Reverse
Wheel control
Track control
MANOUVERING
ENGLISH 10
2.2. JOYSTICK DANFOSS
MANOUVERING
ENGLISH 11
2.3. JOYSTICK DANFOSS
MANOUVERING
ENGLISH 12
2.4. JOYSTICK L8
MANOUVERING
ENGLISH 13
2.5. JOYSTICK L8
MANOUVERING
ENGLISH 14
2.6. QUICK HITCH
Pos
1 Activate the implement lock
2 Hold switch for shift of tool lock on thumbwheel
3 Move thumbwheel to open tool lock
Pos
1 Move thumbwheel to close tool lock
2 Inactivate the implement lock
MANOUVERING
ENGLISH 15
2.7. TRACK CONTROL
Symbol Function Symbol Function
Track control active
Track control inactive
MANOUVERING
ENGLISH 16
2.8. WHEEL CONTROL
Symbol Funktion Symbol Funktion
Hjulstyrning aktivt
Hjulstyrning inaktivt
MANOUVERING
ENGLISH 17
2.9. ACTIVATION SHEAR
Pos Activate shear
1 Unlease connector at boom stick.
2 Hold switch for quick hitch
3 Buzzer active
4 Shear
Pos Inactivate shear
1 Connect connector at boom stick
2 Buzzer active
3 Tiltrotator
CABIN MODULE MENU
ENGLISH 18
3. CABIN MODULE MENU
3.1. LOGIN TO MENU
Pos
1 and or EXTRA A/B for 5 seconds
2 Thumbwheel in right joystick
3 Thumbwheel in left joystick
4 Any switch connected to the system
CABIN MODULE MENU
ENGLISH 19
3.2. MENU
3.2.1. Main
3.2.1. User
3.2.1.1. Standard
CABIN MODULE MENU
ENGLISH 20
3.2.1.2. Multiple users
Pos
USER 1-3 Selectable users. These are only available if it has been activated at assembly.
SHEAR Double feeder. It is only available if it has been activated at assembly.
3.2.2. Joystick
Pos
CAL RA1-LA1 Calibrate analog pair RA1 och LA1
CAL RA2-LA2 Calibrate analog pair RA2 och LA2
CAL RA3-LA3 Calibrate analog pair RA3 och LA3
CABIN MODULE MENU
ENGLISH 21
3.2.2.1. Midpoint
CABIN MODULE MENU
ENGLISH 22
3.2.2.2. Endpoints and confirmation
CABIN MODULE MENU
ENGLISH 23
3.2.3. System
3.2.3.1. Backup
Pos
TM to CM Copy parameters from tiltrotator module to cabin module
TM to CM Copy parameters from cabin module to tiltrotator module
Valves Copy only calibrated currents from the tiltrotator module to the cabin module
CALIBRATION
ENGLISH 24
4. CALIBRATION
WARNING! Assembling and calibration may only be made by an authorized work shop. Changes in the assembly may not be made without the manufacturer’s consent.
Microprop DC2 is calibrated with PC and MicroConf DC2. An Android smart phone may be connected to the control system. Download Android application “Microprop DC2” from Android market.
Top Related