© MIS Corporation. All rights reserved. * Additional information may be added to the product descriptions without prior notice.
Established in 1995,
MIS Implants Technologies Ltd. is a global
leader in the development and production of advanced
products and innovative solutions aimed to simplify dental
implantology. Through our state-of-the-art production facilities, MIS
offers a comprehensive range of high quality dental implants,
superstructures, tools and kits, as well as extensive
solutions for oral restoration and health.
1.
PROSTHETICS
90 - 91 Analog and Impression Coping92 - 92 Temporary Restoration93 - 101 Cemented Restoration102 - 106 Screw Retained Restoration107 - 117 Overdenture
IMPLANTS
6 - 37 Implant Systems38 - 58 Tools59 - 86 Kits
TABLE OF CONTENTS
3.
ADDITIONAL INFORMATION
i2 - i55
MCENTER (DIGITAL DENTISTRY)
132 - 143 MGUIDE144 - 147 MLAB
REGENERATIVE SOLUTIONS
120 - 123 Bone Grafting Materials124 - 126 Barrier Membranes127 - 128 Collagen Wound Dressings
INDEX
Toll Free 1-866-797-1333
MIS proudly offers a wide range of implant systems, providing simple solutions for a wide variety of clinical scenarios, from basic to complex. Each and every implant design is based on a long history of advanced R&D. MIS implants are made of biocompatible, medical grade Titanium Alloy, with a surface of the highest quality; treated by both sand blasting and acid-etching, to promote long-lasting osseointegration. MIS adheres to the most stringent international quality standards, complying with ISO 2003 :13485 Quality Management System for Medical Devices. Products that appear in this catalog are CE approved and FDA cleared for marketing.
IMPLANT SYSTEMS.
All products shown in this catalog are sold subject to individual regulatory certification only.
SEVEN Internal Hex. Ø3.30
Ø 2.40
Ø 3.30
L
Ø 2.10
SEVEN Internal Hex. Ø3.30
Implant Systems
6.
SEVEN Internal Hex. Ø3.30
Cat. No. Dimension Description Material Item includes Additional info.
MF7-10330 Ø3.30mmL=10mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-11330 Ø3.30mmL=11.5mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-13330 Ø3.30mmL=13mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-16330 Ø3.30mmL=16mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
Final drill For bone type 1&2
Final drill
Final drillFor bone type 1&2
1200-1500
Ø2.40 Ø3.30Ø1.90
900-1200
15-25
Ø2.20 Ø3.20
200-400
Ø2.40
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
MH-N2330MH-N3330MH-N4330MH-N6330MH-N8330
MC1-00330
MH-52330MH-53330MH-54330MH-55330MH-56330
Implant cover screw & healing caps
Ø4
Ø4.3
$20
$20
7.
SEVEN Internal Hex. Ø3.75
Ø 3.10
Ø 3.75
L
Ø 2.45
SEVEN Internal Hex. Ø3.75
Implant Systems
8.
SEVEN Internal Hex. Ø3.75
Cat. No. Dimension Description Material Item includes Additional info.
MF7-08375 Ø3.75mmL=8mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-10375 Ø3.75mmL=10mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-11375 Ø3.75mmL=11.5mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-13375 Ø3.75mmL=13mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-16375 Ø3.75mmL=16mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
Final drill
OR
For bone type 3&4
CountersinkMT-GDN33
For bone type 1&2
MT-GDN33
Final drillFor bone type 1&2
For bone type 3&4
CountersinkMT GDN33
1200-1500
900-1200
Ø1.90 Ø2.80 Ø3.75Ø2.40 Ø2.40
500-700 15-25
Ø2.80 Ø3.60
Ø3.75
200-400
200-500
Ø2.80
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
MC1-00375
Implant cover screw & healing caps
MH-03375MH-04375MH-05375MH-06375
Ø4
MH-53375MH-54375MH-55375MH-56375
Ø5.5
Ø 4.8
MH-A3375MH-A4375MH-A5375MH-A6375$20
$20
$20
9.
SEVEN Internal Hex. Ø4.20
Ø 3.70
Ø 4.20
Ø 3.75
L
Ø 2.45
0.4mm
SEVEN Internal Hex. Ø4.20
Implant Systems
10.
SEVEN Internal Hex. Ø4.20
Cat. No. Dimension Description Material Item includes Additional info.
MF7-06420 Ø4.20mmL=6mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-08420 Ø4.20mmL=8mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-10420 Ø4.20mmL=10mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-11420 Ø4.20mmL=11.5mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-13420 Ø4.20mmL=13mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-16420 Ø4.20mmL=16mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
For bone type 3&4
For bone type 1&2
Final drill CountersinkMT-GDN33
1200-1500
900-1200
Ø2.40 Ø2.80Ø1.90 Ø2.40
500-700
Ø3.20 Ø3.20
400-700
Ø3.30Ø4.10 Ø4.20
200-400
200-500
Ø4.20
15-25
OR
For bonetype 1&2
Final drill
For bone type 3&4
CountersinkMT-GDN33
MC1-00375
Implant cover screw & healing caps
MH-03375MH-04375MH-05375MH-06375
Ø4
MH-53375MH-54375MH-55375MH-56375
Ø5.5
Ø 4.8
MH-A3375MH-A4375MH-A5375MH-A6375
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
$20
$20
$20
11.
SEVEN Internal Hex. Ø5
Ø 4.50
Ø 5
Ø 4.5
0.4mm
L
Ø 2.45
SEVEN Internal Hex. Ø5
Implant Systems
12.
SEVEN Internal Hex. Ø5
Cat. No. Dimension Description Material Item includes Additional info.
MF7-06500 Ø5mmL=6mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-08500 Ø5mmL=8mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-10500 Ø5mmL=10mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-11500 Ø5mmL=11.5mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-13500 Ø5mmL=13mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-16500 Ø5mmL=16mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Ø4.10 Ø 4.90
Ø5
200-400
200-500
Ø5
15-25
Ø4
300-500
1200-1500
900-1200
Ø2.40 Ø2.80 Ø3.20Ø2.40Ø1.90
500-700
400-700
Ø4
OR
For bone type 3&4
For bone type 1&2
Final drill CountersinkMT-GDN50
MH-W3500MH-W4500MH-W5500
MC1-00470
MH-W3630MH-W4630MH-W5630
Implant cover screw & healing caps
Ø5
Ø6.5
$20
$20
13.
SEVEN Internal Hex. Ø6
Ø 5.50
Ø 6
Ø 4.5
0.4mm
L
Ø 2.45
SEVEN Internal Hex. Ø6
Implant Systems
14.
SEVEN Internal Hex. Ø6
Cat. No. Dimension Description Material Item includes Additional info.
MF7-06600 Ø6mmL=6mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-08600 Ø6mmL=8mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-10600 Ø6mmL=10mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-11600 Ø6mmL=11.5mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
MF7-13600 Ø6mmL=13mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill
See p. no. i2-5
$180
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Ø5.10 Ø 5.90
Ø6
200-400
200-500
Ø6
15-25
Ø4 Ø4.5
300-500
300-500
300-500
1200-1500
900-1200
Ø2.40 Ø2.80 Ø3.20Ø2.40Ø1.90
500-700
400-700
Ø5 Ø5
Ø2.40
Ø4.5
300-500
300-500
Ø5
For bone type 3&4
For bone type 1&2
Final drill CountersinkMT-GDN50
OR
Ø5
15.
MIS MULTIFIX Cover
MIS MULTIFIXFixed Restoration for Atrophic Ridges
16.
MIS MULTIFIX 18 and 20mm Implants
Cat. No. Dimension Description Material Item includes Additional info.
MF7-18375 Ø3.75mmL=18mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill See p. no. i6
$180
MF7-20375 Ø3.75mmL=20mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill See p. no. i6
$180
MF7-18420 Ø4.20mmL=18mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill See p. no. i6
$180
MF7-20420 Ø4.20mmL=20mm SEVEN internal hex. implant Titanium Alloy
Ti 6Al 4V ELICover ScrewFinal Drill See p. no. i6
$180
MIS MULTIFIX 18 and 20mm Implants
Implant Systems
17.
MIS MULTIFIX Drilling Set for 18 and 20mm
Cat. No. Dimension Description Material Item includes Additional info.
MT-ETD24 Ø2.4mmL=39mm Extra-long twist drill Stainless steel - See p. no. i7
MT-ETD28 Ø2.8mmL=39mm Extra-long twist drill Stainless steel - See p. no. i7
MT-ETD32 Ø3.2mmL=39mm Extra-long twist drill Stainless steel - See p. no. i7
MT-ETD38 Ø3.8mmL=39mm Extra-long twist drill Stainless steel - See p. no. i7
MT-LBT24 Ø2.4mmL=34mm Long body try-in Stainless steel - See p. no. i7
MIS MULTIFIX Drilling Set for 18 and 20mm
Implant Systems
MK-0058
Call For Price: 1-866-797-1333
18.
MIS MULTIFIX Drilling Set for 18 and 20mm
MT-LBT28 Ø2.8mmL=34mm Long body try-in Stainless steel - See p. no. i7
MT-LBT32 Ø3.2mmL=34mm Long body try-in Stainless steel - See p. no. i7
MT-LBT38 Ø3.8mmL=34mm Long body try-in Stainless steel - See p. no. i7
For bone type 3&4
For bone type 1&2
Final drill CountersinkMT-GDN33
1200-1500
900-1200
Ø2.40 Ø2.80Ø1.90 Ø2.40
500-700
Ø3.20Ø3.50
Ø3.20
400-700
Ø3.20Ø4.20
200-400
200-500
Ø4.20
15-25
OR
For bone type 3&4
For boneFinal drill
CountersinkMT-GDN33
type 3&4
For bone type 1&2
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence isdemonstrated with a 18mm, Ø4.20mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Call For Price: 1-866-797-1333
19.
MIS MULTIFIX Bone Profiler Kit
Cat. No. Dimension Description Material Item includes Additional info.
MT-BP320 Ø3.2mm Bone profiler, internal hex., NP Stainless steel - See p. no. i8-9
MT-BP370 Ø3.7mm Bone profiler, internal hex., SP Stainless steel - See p. no. i8-9
MT-BP460 Ø4.6mm Bone profiler, internal hex., WP Stainless steel - See p. no. i8-9
MT-BGP32 Ø3.2mm Bone Profiler guide pin, internal hex., NP Stainless steel - See p. no.
i8-9
MT-BGP37 Ø3.7mm Bone Profiler guide pin, internal hex., SP Stainless steel - See p. no.
i8-9
MT-BGP46 Ø4.6mm Bone Profiler guide pin, internal hex., WP Stainless steel - See p. no.
i8-9
MIS MULTIFIX Bone Profiler Kit
Implant Systems
MK-0059
Call For Price: 1-866-797-1333
20.
MIS MULTIFIX Cover End
MIS MULTIFIX 18 AND 20MM IMPLANTSMIS MULTIFIX
MIS MULTIFIX BONE PROFILER KITMIS MULTIFIX DRILLING SET FOR 18 AND 20MM
21.
M4 Internal Hex. Ø3.30
Ø 2.65
Ø 3.30
L
Ø 2.10
M4 Internal Hex. Ø3.30
Implant Systems
22.
M4 Internal Hex. Ø3.30
Cat. No. Dimension Description Material Item includes Additional info.
MF4-10330 Ø3.30mmL=10mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-11330 Ø3.30mmL=11.5mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-13330 Ø3.30mmL=13mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-16330 Ø3.30mmL=16mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
1200-1500
900-1200
Ø1.90 Ø2.4Ø2.80
500-700
200-500
Ø3.30
15-25Ø3.00Ø3.30
For bone type 3&4
CountersinkMT-CSN33For bone
type 1&2
OR
type 3&4
type 1&2
MH-N2330MH-N3330MH-N4330MH-N6330MH-N8330
MC1-00330
MH-52330MH-53330MH-54330MH-55330MH-56330
Implant cover screw & healing caps
Ø4
Ø4.3
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
$20
$20
23.
M4 Internal Hex. Ø3.75
Ø 3
Ø 3.75
L
Ø 2.45
M4 Internal Hex. Ø3.75
Implant Systems
24.
M4 Internal Hex. Ø3.75
Cat. No. Dimension Description Material Item includes Additional info.
MF4-08375 Ø3.75mmL=8mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-10375 Ø3.75mmL=10mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-11375 Ø3.75mmL=11.5mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-13375 Ø3.75mmL=13mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-16375 Ø3.75mmL=16mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
1200-1500
900-1200
Ø1.90 Ø2.80Ø2.40
500-700
400-700
15-25Ø3.20
Ø3.75
200-500
Ø3.75
For bone type 3&4
CountersinkMT-GDN33For bone
type 1&2
OR
yp
MC1-00375
MH-53375MH-54375MH-55375MH-56375
Implant cover screw & healing caps
MH-03375MH-04375MH-05375MH-06375
Ø4
Ø5.5
Ø 4.8
MH-A3375MH-A4375MH-A5375MH-A6375
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
$20
$20
$20
25.
M4 Internal Hex. Ø4.20
Ø 3.65
Ø 4.20
Ø 3.75
L
Ø 2.45
0.4mm
M4 Internal Hex. Ø4.20
Implant Systems
26.
M4 Internal Hex. Ø4.20
Cat. No. Dimension Description Material Item includes Additional info.
MF4-06420 Ø4.20mmL=6mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-08420 Ø4.20mmL=8mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-10420 Ø4.20mmL=10mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-11420 Ø4.20mmL=11.5mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-13420 Ø4.20mmL=13mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-16420 Ø4.20mmL=16mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
MH-03375MH-04375MH-05375MH-06375
MC1-00375
MH-53375MH-54375MH-55375MH-56375
Implant cover screw & healing caps
Ø4
Ø5.5
Ø 4.8
MH-A3375MH-A4375MH-A5375MH-A6375
1200-1500
900-1200
Ø1.90 Ø2.80Ø2.4
500-700
400-700
400-600
15-25
Ø3.20Ø3.80
Ø4.20
200-500
Ø4.20
For bone type 3&4
CountersinkMT-GDN33For bone
type 1&2For bonetype 3&4
CountersinkMT-GDN33
OR
$20
$20
$20
27.
M4 Internal Hex. Ø5
Ø 4.35
Ø 4.5
Ø 5
L
0.4mm
Ø 2.45
M4 Internal Hex. Ø5
Implant Systems
28.
M4 Internal Hex. Ø5
Cat. No. Dimension Description Material Item includes Additional info.
MF4-06500 Ø5mmL=6mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-08500 Ø5mmL=8mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-10500 Ø5mmL=10mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-11500 Ø5mmL=11.5mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-13500 Ø5mmL=13mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-16500 Ø5mmL=16mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
1200-1500
900-1200
Ø1.90 Ø2.80Ø2.40
500-700
400-700
400-600
400-600
15-25
Ø3.20 Ø3.80Ø4.50
Ø5
200-500
Ø5
For bone type 3&4
CountersinkMT-GDN50For bone
type 1&2For bonetype 3&4
CountersinkMT-GDN50
OR
MH-W3500MH-W4500MH-W5500
MC1-00470
MH-W3630MH-W4630MH-W5630
Implant cover screw & healing caps
Ø5
Ø6.5
$20
$20
29.
M4 Internal Hex. Ø6
Ø 5.35
Ø 4.5
Ø 6
0.4mm
L
Ø 2.45
M4 Internal Hex. Ø6
Implant Systems
30.
M4 Internal Hex. Ø6
Cat. No. Dimension Description Material Item includes Additional info.
MF4-06600 Ø6mmL=6mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-08600 Ø6mmL=8mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-10600 Ø6mmL=10mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-11600 Ø6mmL=11.5mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
MF4-13600 Ø6mmL=13mm M4 internal hex. implant Titanium Alloy
Ti 6Al 4V ELI Cover Screw See p. no. i2-5
$150
1200-1500
900-1200
Ø1.90 Ø2.80Ø2.4
500-700
400-700
400-600
400-600
Ø3.20 Ø3.80 Ø4.50
15-25
Ø6
300-500300-
500
200-500
Ø5.50Ø5
Ø6.00
For bone type 3&4
CountersinkMT-GDN50For bone
type 1&2For bonetype 3&4
CountersinkMT-GDN50
OR
type 1&2
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Drilling Speed (RPM)
Diameter
MH-W3500MH-W4500MH-W5500
MC1-00470
MH-W3630MH-W4630MH-W5630
Implant cover screw & healing caps
Ø5
Ø6.5
$20
$20
31.
UNO One-Piece Implant Ø3
Ø 3
L
2.7mm
6.3mm
UNO One-Piece Implant Ø3
Implant Systems
32.
UNO One-Piece Implant Ø3
Cat. No. Dimension Description Material Item includes Additional info.
MO1-10300 Ø3mmL=10mm UNO One-Piece implant Titanium Alloy
Ti 6Al 4V ELI - See p. no. i2-5
MO1-11300 Ø3mmL=11.5mm UNO One-Piece implant Titanium Alloy
Ti 6Al 4V ELI - See p. no. i2-5
MO1-13300 Ø3mmL=13mm UNO One-Piece implant Titanium Alloy
Ti 6Al 4V ELI - See p. no. i2-5
MO1-16300 Ø3mmL=16mm UNO One-Piece implant Titanium Alloy
Ti 6Al 4V ELI - See p. no. i2-5
Ø2.40
700-900
Ø2.40Ø2
15-25
Ø3
900-1200
Ø2
1200-1500
Ø1.90
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Not available in USA
33.
UNO One-Piece Implant Ø3.50
Ø 3.50
L
2.7mm
6.3mm
UNO One-Piece Implant Ø3.50
Implant Systems
34.
UNO One-Piece Implant Ø3.50
Cat. No. Dimension Description Material Item includes Additional info.
MO1-10350 Ø3.50mmL=10mm UNO One-Piece implant Titanium Alloy
Ti 6Al 4V ELI - See p. no. i2-5
MO1-11350 Ø3.50mmL=11.5mm UNO One-Piece implant Titanium Alloy
Ti 6Al 4V ELI - See p. no. i2-5
MO1-13350 Ø3.50mmL=13mm UNO One-Piece implant Titanium Alloy
Ti 6Al 4V ELI - See p. no. i2-5
MO1-16350 Ø3.50mmL=16mm UNO One-Piece implant Titanium Alloy
Ti 6Al 4V ELI - See p. no. i2-5
Ø3
900-1200
Ø2 Ø2
700-900
Ø2.40
500-700
Ø3
15-25
Ø3.50
1200-1500
Ø1.90
Drilling Speed (RPM)
Diameter
Do not use the final drillfor bone types 3&4.
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Not available in USA
35.
LINK - Orthodontic Anchor Screw
L
Ø 2.75
2.5
2.5mm
1mm
LINK - Orthodontic Anchor Screw
Implant Systems
36.
LINK - Orthodontic Anchor Screw
Cat. No. Dimension Description Material Item includes Additional info.
MG2-06160 Ø1.6mmL=6mm
LINK - Orthodontic anchor screw
Titanium Alloy Ti 6Al 4V ELI - -
MG2-08160 Ø1.6mmL=8mm
LINK - Orthodontic anchor screw
Titanium Alloy Ti 6Al 4V ELI - -
MG2-10160 Ø1.6mmL=10mm
LINK - Orthodontic anchor screw
Titanium Alloy Ti 6Al 4V ELI - -
MG2-12160 Ø1.6mmL=12mm
LINK - Orthodontic anchor screw
Titanium Alloy Ti 6Al 4V ELI - -
MT-TDO01 Ø1mmL=28mm
LINK - Orthodontic anchor pilot drill Stainless steel - -
$85
MT-SCD20 L=28mm Short cross driver for orthodontic screws Stainless steel - -
MT-LCD20 L=54mm Long cross driver for orthodontic screws Stainless steel - -
MT-MSD20 L=140mm Surgical adapter driver Stainless steel + Aluminum - -
$120
Not available in USA
37.
Pilot Drills - External Irrigation
Cat. No. Dimension Description Material Placement Additional info.
MT-TDN20 Ø2mmL=37.3mm Pilot drill, external irrigation Stainless steel See p. no. i10 STAND
ALONE
$85
MT-P2406 Ø2.40mmL=31.8mm
Pilot drill with built-in stopper, height 6mm Stainless steel See p. no. i10 STAND
ALONEINSIDE
KIT
$85
MT-P2408 Ø2.40mmL=31.8mm
Pilot drill with built-in stopper, height 8mm Stainless steel See p. no. i10 STAND
ALONEINSIDE
KIT
$85
MT-P2410 Ø2.40mmL=31.8mm
Pilot drill with built-in stopper, height 10mm Stainless steel See p. no. i10 STAND
ALONEINSIDE
KIT
$85
Pilot Drills - External Irrigation
Tools
38.
Cat. No. Dimension Description Material Placement Additional info.
Pilot Drills - External Irrigation
Cat. No. Dimension Description Material Placement Additional info.
MT-P2411 Ø2.40mmL=31.8mm
Pilot drill with built-in stopper, height 11.50mm Stainless steel See p. no. i10 STAND
ALONEINSIDE
KIT
$85
MT-P2413 Ø2.40mmL=31.8mm
Pilot drill with built-in stopper, height 13mm Stainless steel See p. no. i10 STAND
ALONEINSIDE
KIT
$85
MT-P2416 Ø2.40mmL=37.5mm
Pilot drill with built-in stopper, height 16mm Stainless steel See p. no. i10 STAND
ALONEINSIDE
KIT
$85
6 DepthMarks
6mm8mm
10mm11.50mm
13mm
16mm
0mm
16mm
39.
SEVEN - Twist Drills External Irrigation
Cat. No. Dimension Description Material Placement Additional info.
MT-TDT28 Ø2.80mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no. i11 STAND
ALONEINSIDE
KIT
$85
MT-TDT32 Ø3.20mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no. i11 STAND
ALONEINSIDE
KIT
$85
MT-TDT40 Ø4mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no. i11 STAND
ALONEINSIDE
KIT
$85
MT-TDT45 Ø4.50mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no. i11 STAND
ALONEINSIDE
KIT
$85
MT-TDT50 Ø5mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no. i11 STAND
ALONEINSIDE
KIT
$85
SEVEN - Twist Drills External Irrigation
Tools
40.
Cat. No. Dimension Description Material Placement Additional info.
M4 - Twist Drills External Irrigation
Cat. No. Dimension Description Material Placement Additional info.
MT-TDN28 Ø2.80mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no. i12 STAND
ALONEINSIDE
KIT
$85
MT-TDN32 Ø3.20mmL=37.6mm Twist drill, external irrigation Stainless steel See p. no. i12 STAND
ALONEINSIDE
KIT
$85
MT-TDN38 Ø3.80mmL=37.8mm Twist drill, external irrigation Stainless steel See p. no. i12 STAND
ALONEINSIDE
KIT
$85
MT-TDN45 Ø4.50mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no. i12 STAND
ALONEINSIDE
KIT
$85
MT-TDN50 Ø5mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no. i12 STAND
ALONEINSIDE
KIT
$85
MT-TDN55 Ø5.50mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no. i12 STAND
ALONEINSIDE
KIT
$85
M4 - Twist Drills External Irrigation
Tools
41.
SEVEN and M4 - Short Twist Drills
External Irrigation
Cat. No. Dimension Description Material Placement Additional info.
MT-TDI28 Ø2.80mmL=30mm Short twist drill Stainless steel See p. no. i13 STAND
ALONE
$85
MT-TDI32 Ø3.20mmL=30mm Short twist drill Stainless steel See p. no. i13 STAND
ALONE
$85
MT-TDI38 Ø3.80mmL=30mm Short twist drill Stainless steel See p. no. i13 STAND
ALONE
$85
MT-TDI40 Ø4.0mmL=30mm Short twist drill Stainless steel See p. no. i13 STAND
ALONE
$85
SEVEN and M4 - Short Twist Drills
External Irrigation
Tools
42.
Cat. No. Dimension Description Material Placement Additional info.
SEVEN and M4 - Short Twist Drills
External Irrigation
Cat. No. Dimension Description Material Placement Additional info.
MT-TDI45 Ø4.50mmL=30mm Short twist drill Stainless steel See p. no. i13 STAND
ALONE
$85
MT-TDI50 Ø5.0mmL=30mm Short twist drill Stainless steel See p. no. i13 STAND
ALONE
$85
MT-TDI55 Ø5.50mmL=30mm Short twist drill Stainless steel See p. no. i13 STAND
ALONE
$85
7Drilling Diameter Options
Ø 2
.80
Ø 3
.20
Ø 3
.80
Ø 4
Ø 4
.50
Ø 5
Ø 5
.50
43.
SEVEN and M4 - Twist Drills Internal
Irrigation
Cat. No. Dimension Description Material Placement Additional info.
MT-TD280 Ø2.80mmL=37.5mm Twist drill, internal irrigation Stainless steel See p. no. i14 STAND
ALONE
$85
MT-TD320 Ø3.20mmL=37.6mm Twist drill, internal irrigation Stainless steel See p. no. i14 STAND
ALONE
$85
MT-TD380 Ø3.80mmL=37.8mm Twist drill, internal irrigation Stainless steel See p. no. i14 STAND
ALONE
$85
MT-TD400 Ø4mmL=37.8mm Twist drill, internal irrigation Stainless steel See p. no. i14 STAND
ALONE
$85
SEVEN and M4 - Twist Drills Internal Irrigation
Tools
44.
Cat. No. Dimension Description Material Placement Additional info.
SEVEN and M4 - Twist Drills
Internal Irrigation
Cat. No. Dimension Description Material Placement Additional info.
MT-TD450 Ø4.50mmL=38.2mm Twist drill, internal irrigation Stainless steel See p. no. i14 STAND
ALONE
$85
MT-TD500 Ø5mmL=38.2mm Twist drill, internal irrigation Stainless steel See p. no. i14 STAND
ALONE
$85
MT-TD550 Ø5.50mmL=38.2mm Twist drill, internal irrigation Stainless steel See p. no. i14 STAND
ALONE
$85
7Internal Irrigation Drills
45.
Marking Drills and Countersinks
Cat. No. Dimension Description Material Placement Additional info.
MT-TDN19 Ø1.90mmL=34mm Marking drill, external irrigation Stainless steel - STAND
ALONEINSIDE
KIT
$37
MT-TD110 Ø1.90mmL=34mm Marking drill, internal irrigation Stainless steel - STAND
ALONE
$37
MT-SMD10 L=30mm Spade marking drill Stainless steel - STANDALONE
INSIDEKIT
$85
MT-PD440 Ø4mmL=32.7mm Position drill Stainless steel - STAND
ALONE
$85
Marking Drills and Countersinks
Tools
46.
Cat. No. Dimension Description Material Placement Additional info.
Marking Drills and Countersinks
Cat. No. Dimension Description Material Placement Additional info.
MT-CSN33 Ø3.30mmL=31mm Countersink, NP Stainless steel - STAND
ALONEINSIDE
KIT
$85
MT-GDN33 Ø3.75/4.20mmL=26mm Countersink, SP Stainless steel - STAND
ALONEINSIDE
KIT
$85
MT-GDN50 Ø5/6mmL=26.8mm Countersink, WP Stainless steel - STAND
ALONEINSIDE
KIT
$85
5 CountersinksDepth Marksaaaaaaa
Narrow Platform
Ø3.30
Ø3.75
Ø4.20
Standard Platform
Ø5
Ø6
Wide Platform
47.
Ceramic Drills
Cat. No. Dimension Description Material Placement Additional info.
MT-CRD21 Ø2.10mmL=28.5mm Ceramic marking drill Ceramic - STAND
ALONE
$115
MT-CRD20 Ø2mmL=33.5mm Ceramic pilot drill Ceramic - STAND
ALONE
$125
MT-CRD28 Ø2.80mmL=35mm Ceramic twist drill Ceramic - STAND
ALONE
$125
Ceramic Drills
Tools
48.
Cat. No. Dimension Description Material Placement Additional info.
Trephine Burrs
Cat. No. Dimension Description Material Placement Additional info.
MT-00400 Ø4/5mmL=37mm Trephine burr Stainless steel - STAND
ALONE
$89
MT-00500 Ø5/6mmL=37mm Trephine burr Stainless steel - STAND
ALONE
$89
MT-00600 Ø6/7mmL=37mm Trephine burr Stainless steel - STAND
ALONE
$89
Trephine Burrs
Tools
49.
Ratchets
Cat. No. Dimension Description Material Placement Additional info.
MT-RI030 L=84mm Monoblock ratchet - See p. no. i15 STANDALONE
INSIDEKIT
$150
MT-RI040 L=95mm Torque ratchet for prosthetic screws - See p. no. i15 STAND
ALONEINSIDE
KIT
$235
MT-RT070 L=95mm Surgical torque ratchet - See p. no. i15 STANDALONE
INSIDEKIT
$235
Ratchets
Tools
50.
Cat. No. Dimension Description Material Placement Additional info.
Surgical Tools
Cat. No. Dimension Description Material Placement Additional info.
MT-HSI10 L=24.4mm Short insertion tool, internal hex. Stainless steel - STANDALONE
INSIDEKIT
$47
MT-HLI10 L=28.2mm Long insertion tool, internal hex. Stainless steel - STANDALONE
INSIDEKIT
$47
MT-SRH20 L=22.3mm Short insertion tool, internal hex. Stainless steel - STANDALONE
INSIDEKIT
$47
MT-LRH20 L=32.3mm Long insertion tool, internal hex. Stainless steel - STANDALONE
INSIDEKIT
$47
MT-MRH10 L=19mm Hex. ratchet short adapter, internal hex. Stainless steel - STAND
ALONE
$47
MT-MRH20 L=25mm Hex. ratchet long adapter, internal hex. Stainless steel - STAND
ALONE
$47
Surgical Tools
Tools
51.
Surgical Tools
Cat. No. Dimension Description Material Placement Additional info.
MT-NRH10 L=25mm Long ratchet adapter, internal hex., NP Stainless steel - STAND
ALONEINSIDE
KIT
$45
MT-NRH20 L=25mm Hex. ratchet long adapter, internal hex., NP Stainless steel - STAND
ALONE
$47
MT-RDS30 L=18.5mm Short driver for 0.05 inch hex. Stainless steel - STANDALONE
INSIDEKIT
$45
MT-RDL30 L=23.5mm Long driver for 0.05 inch hex. Stainless steel - STANDALONE
INSIDEKIT
$45
MT-RB225 L=22mm Ball attachment anchor key Stainless steel - STANDALONE
INSIDEKIT
$50
MT-MUR02 L=18.7mm Angulated Multi-Unit short key Stainless steel - STANDALONE
INSIDEKIT
$49
MT-SM005 L=24mm Short motor adapter for 0.05 inch hex. Stainless steel - STAND
ALONE
$45
MT-LM005 L=30mm Long motor adapter for 0.05 inch hex. Stainless steel - STAND
ALONEINSIDE
KIT
$45
MT-HDS30 L=16mm Short driver for 0.05 inch hex. Stainless steel - STANDALONE
$45
MT-HDL30 L=22mm Long driver for 0.05 inch hex. Stainless steel - STANDALONE
$45
MT-RMR05 L=27.5mm Short direct hand and ratchet key Stainless steel - STAND
ALONE
$47
52.
Cat. No. Dimension Description Material Placement Additional info.
Surgical Tools
Cat. No. Dimension Description Material Placement Additional info.
MT-RMR10 L=38.5mm Long direct hand andratchet key Stainless steel - STAND
ALONEINSIDE
KIT
$47
MT-HMR05 L=20.5mm Short direct hand and ratchet hex. key Stainless steel - STAND
ALONE
$47
MT-HMR10 L=25mm Long direct hand and ratchet hex.key Stainless steel - STAND
ALONE
$47
MT-SRA10 L=15.50mm Square connection to ratchet adapter Stainless steel - STAND
ALONEINSIDE
KIT
$47
MT-PP001 Ø2.0/3.20mmL=24mm Parallel pin Stainless steel - STAND
ALONEINSIDE
KIT
$19
MT-DE001 L=24mm Drill extender Stainless steel - STANDALONE
INSIDEKIT
$59
MT-HW001 L=13mm Hand wrench Stainless steel - STANDALONE
INSIDEKIT
$40
MT-TP500 Ø4.5mmL=28mm Tissue punch Stainless steel - STAND
ALONE
$58
MT-DI001 L=17mm Implant direction indicator Stainless steel - STANDALONE
INSIDEKIT
$34
MT-RKS15 L=13.5mm UNO One-Piece short key Stainless steel - STANDALONE
INSIDEKIT
MT-RKL21 L=18mm UNO One-Piece long key Stainless steel - STANDALONE
INSIDEKIT
Not available in USA
53.
Surgical Tools
Cat. No. Dimension Description Material Placement Additional info.
MT-HKS15 L=12mm UNO One-Piece implant short key Stainless steel - STAND
ALONE
$45
MT-HKL21 L=17mm UNO One-Piece implant long key Stainless steel - STAND
ALONEINSIDE
KIT
$45
MT-HKO21 L=18.8mm UNO One-Piece implant insertion tool Stainless steel - STAND
ALONEINSIDE
KIT
$57
MT-UMS21 L=22mm UNO One-Piece implant short motor adapter Stainless steel - STAND
ALONE
$45
MT-UML21 L=30mm UNO One-Piece long motor adapter Stainless steel - STAND
ALONEINSIDE
KIT
$45
MT-RT070 L=95mm Surgical torque ratchet - - STANDALONE
INSIDEKIT
$235
MT-RA480 - Ratchet to hex. adapter Stainless steel - STANDALONE
$45
7 Connection Types
54.
Cat. No. Dimension Description Material Placement Additional info.
Prosthetic Instruments
Cat. No. Dimension Description Material Placement Additional info.
MT-AL005 L=72mm Allen key for 0.05 inch hex. Stainless steel - STANDALONE
$10
MT-TSD10 L=50mm Screw driver for titanium ball cap Stainless steel - STAND
ALONE
$45
MT-IT100 L=16.5mm Closed tray impression coping key Stainless steel - STAND
ALONE
$40
MT-SM005 L=24mm Short motor adapter for 0.05 inch hex. Stainless steel - STAND
ALONE
$45
MT-LM005 L=30mm Long motor adapter for 0.05 inch hex. Stainless steel - STAND
ALONEINSIDE
KIT
$45
MT-NB225 L=22mm Ball attachment anchor key Stainless steel - STANDALONE
$50
Prosthetic Instruments
Tools
55.
Prosthetic Instruments
Cat. No. Dimension Description Material Placement Additional info.
MT-HHR07 L=22mm Short screwdriver for 0.05 inch hex. Stainless steel - STAND
ALONE
$60
MT-HHR13 L=28mm Hand driver for 0.05 inch hex. Stainless steel - STANDALONE
INSIDEKIT
$60
MT-HDS30 L=16mm Short driver for 0.05 inch hex. Stainless steel - STANDALONE
$45
MT-HDL30 L=22mm Long driver for 0.05 inch hex. Stainless steel - STANDALONE
$45
MT-IE172 L=27mm Int. connection abutment extractor Titanium - STAND
ALONEINSIDE
KIT
$50
MT-IE160 L=27mm Int. connection abutment extractor, NP Titanium - STAND
ALONEINSIDE
KIT
$50
MT-MSD20 L=140mm Surgical adapter driver Stainless steel + Aluminum - STAND
ALONEINSIDE
KIT
$120
MT-URA10 L=27mm Universal hand driver ratchet head adapter Stainless steel - STAND
ALONEINSIDE
KIT
$48
MT-UN002 L=24mm Implant analog for universal hand driver, Internal hex., NP Stainless steel - STAND
ALONEINSIDE
KIT
$48
MT-US002 L=24mm Implant analog for universal hand driver, internal hex., SP Stainless steel - STAND
ALONEINSIDE
KIT
$48
MT-UW002 L=24mm Implant analog for universal hand driver, internal hex., WP Stainless steel - STAND
ALONEINSIDE
KIT
$48
56.
Cat. No. Dimension Description Material Placement Additional info.
Prosthetic Instruments
Cat. No. Dimension Description Material Placement Additional info.
MT-CS450 - Shoulders reamer Stainless steel - STANDALONE
$115
MT-HTS10 L=142.5mm Technical hex. screwdriver Stainless steel+ plastic - STAND
ALONEINSIDE
KIT
$32
MT-GDM01 Ø2/4/6/8mm Gingival depth measuring instrument Stainless steel - STAND
ALONE
$58
MM-LCT10 L=83mm Locator core tool Steel / Titanium Nitride coated Ti - STAND
ALONEINSIDE
KIT
$82
MM-RSD15 L=19mm Locator short torque wrench driver Stainless steel - STAND
ALONEINSIDE
KIT
$47
MM-RSD20 L=24mm Locator long torque wrench driver Stainless steel - STAND
ALONEINSIDE
KIT
$47
MT-RB225 L=22mm Ball attachment anchor key Stainless steel - STANDALONE
INSIDEKIT
$50
MT-RDM30 L=11.50mm Extra-short driver for 0.05 inch hex. Stainless steel - STAND
ALONE
$45
MT-RDS30 L=18.5mm Short driver for 0.05 inch hex. Stainless steel - STANDALONE
INSIDEKIT
$45
MT-RDL30 L=23.5mm Long driver for 0.05 inch hex. Stainless steel - STANDALONE
INSIDEKIT
$45
MT-RDE30 L=32mm Extra-long driver for 0.05 inch hex. Stainless steel - STAND
ALONE
$45
57.
Prosthetic Instruments
Cat. No. Dimension Description Material Placement Additional info.
MT-RE172 L=28.5mm Int. connection abutment extractor Titanium - STAND
ALONEINSIDE
KIT
$50
MT-RE160 L=28.5mm Int. connection abutment extractor, NP Titanium - STAND
ALONEINSIDE
KIT
$50
MT-MURL2 L=21mm Straight Multi-Unit long ratchet key Stainless steel - STAND
ALONEINSIDE
KIT
$49
MT-MUR02 L=18.7mm Angulated Multi-Unit short key Stainless steel - STANDALONE
INSIDEKIT
$49
MT-RI040 L=95mm Torque ratchet for prosthetic screws - - STAND
ALONEINSIDE
KIT
$235
ET-IT001 - OT-Equator handling tools - - STANDALONE
INSIDEKIT
$119
Ratchet / Hand Connection
Motor Connection
2 Key Types
58.
Cat. No. Dimension Description Material Placement Additional info.
SEVEN Advanced Surgical Kit
Cat. No. Dimension Description Material Placement Additional info.
MT-TDN19 Ø1.90mmL=34mm Marking drill, external irrigation Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$37
MT-SMD10 L=30mm Spade marking drill Stainless steel See p. no. i16-17
STANDALONE
INSIDEKIT
$85
MT-P2406 Ø2.40mmL=31.8mm
Pilot drill with built-in stopper, height 6mm Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-P2408 Ø2.40mmL=31.8mm
Pilot drill with built-in stopper, height 8mm Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-P2410 Ø2.40mmL=31.8mm
Pilot drill with built-in stopper, height 10mm Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-P2411 Ø2.40mmL=31.8mm
Pilot drill with built-in stopper, height 11.50mm Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
SEVEN Advanced Surgical Kit
Kits
MK-EI48 $1850
59.
SEVEN Advanced Surgical Kit
Cat. No. Dimension Description Material Placement Additional info.
MT-P2413 Ø2.40mmL=31.8mm
Pilot drill with built-in stopper, height 13mm Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-P2416 Ø2.40mmL=37.5mm
Pilot drill with built-in stopper, height 16mm Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-TDT28 Ø2.80mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-TDT32 Ø3.20mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-TDT40 Ø4mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-TDT45 Ø4.50mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-TDT50 Ø5mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-BTT24 Ø2.40mmL=28.5mm Body try-in Titanium See p. no.
i16-17 STANDALONE
INSIDEKIT
$34
MT-BTT28 Ø2.80mmL=28.5mm Body try-in Titanium See p. no.
i16-17 STANDALONE
INSIDEKIT
$34
MT-BTT32 Ø3.20mmL=28.5mm Body try-in Titanium See p. no.
i16-17 STANDALONE
INSIDEKIT
$34
MT-BTT40 Ø4mmL=28.5mm Body try-in Titanium See p. no.
i16-17 STANDALONE
INSIDEKIT
$34
60.
Cat. No. Dimension Description Material Placement Additional info.
SEVEN Advanced Surgical Kit
Cat. No. Dimension Description Material Placement Additional info.
MT-BTT45 Ø4.50mmL=28.5mm Body try-in Titanium See p. no.
i16-17 STANDALONE
INSIDEKIT
$34
MT-BTT50 Ø5mmL=28.5mm Body try-in Titanium See p. no.
i16-17 STANDALONE
INSIDEKIT
$34
MT-GDN33 Ø3.75/4.20mmL=26mm Countersink, SP Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-GDN50 Ø5/6mmL=26.8mm Countersink, WP Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$85
MT-PP240 Ø2.40mmL=24mm Parallel pin Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$19
MT-HLI10 L=28.2mm Long insertion tool, internal hex. Stainless steel See p. no. i16-17
STANDALONE
INSIDEKIT
$47
MT-HSI10 L=24.4mm Short insertion tool, internal hex. Stainless steel See p. no. i16-17
STANDALONE
INSIDEKIT
$47
MT-DE001 L=24mm Drill extender Stainless steel See p. no. i16-17
STANDALONE
INSIDEKIT
$59
MT-LM005 L=30mm Long motor adapter for 0.05 inch hex. Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$45
MT-RT070 L=95mm Surgical torque ratchet - See p. no. i16-17
STANDALONE
INSIDEKIT
$235
MT-LRH20 L=32.3mm Long insertion tool, internal hex. Stainless steel See p. no. i16-17
STANDALONE
INSIDEKIT
$47
61.
SEVEN Advanced Surgical Kit
Cat. No. Dimension Description Material Placement Additional info.
MT-SRH20 L=22.3mm Short insertion tool, internal hex. Stainless steel See p. no. i16-17
STANDALONE
INSIDEKIT
$47
MT-RMR10 L=38.5mm Long direct hand andratchet key Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$47
MT-RDL30 L=23.5mm Long driver for 0.05 inch hex. Stainless steel See p. no. i16-17
STANDALONE
INSIDEKIT
$45
MT-NRH10 L=25mm Long ratchet adapter, internal hex., NP Stainless steel See p. no.
i16-17 STANDALONE
INSIDEKIT
$45
MN-PF330MD-PF375
H=11mmH=11mm Direct press fit for closed tray Titanium See p. no.
i16-17 STANDALONE
INSIDEKIT
NPSP
$38
Procedures5
Ø3.30mm
Ø2.80 Ø3.20 Ø4 Ø4.50 Ø5
Ø3.75mm Ø4.20mm Ø5mm Ø6mm
62.
Cat. No. Dimension Description Material Placement Additional info.
M4 Advanced Surgical Kit
Cat. No. Dimension Description Material Placement Additional info.
MT-SMD10 L=30mm Spade marking drill Stainless steel See p. no. i18-19
STANDALONE
INSIDEKIT
$85
MT-TDN19 Ø1.90mmL=34mm Marking drill, external irrigation Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$37
MT-P2416 Ø2.40mmL=37.5mm
Pilot drill with built-in stopper, height 16mm Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$85
MT-TDN28 Ø2.80mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$85
MT-TDN32 Ø3.20mmL=37.6mm Twist drill, external irrigation Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$85
MT-TDN38 Ø3.80mmL=37.8mm Twist drill, external irrigation Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$85
M4 Advanced Surgical Kit
Kits
MK-0016 $999
63.
M4 Advanced Surgical Kit
Cat. No. Dimension Description Material Placement Additional info.
MT-TDN45 Ø4.50mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$85
MT-TDN50 Ø5mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$85
MT-TDN55 Ø5.50mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$85
MT-DE001 L=24mm Drill extender Stainless steel See p. no. i18-19
STANDALONE
INSIDEKIT
$59
MT-LM005 L=30mm Long motor adapter for 0.05 inch hex. Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$45
MT-HSI10 L=24.4mm Short insertion tool, internal hex. Stainless steel See p. no. i18-19
STANDALONE
INSIDEKIT
$47
MT-HLI10 L=28.2mm Long insertion tool, internal hex. Stainless steel See p. no. i18-19
STANDALONE
INSIDEKIT
$47
MT-CSN33 Ø3.30mmL=31mm Countersink, NP Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$85
MT-GDN33 Ø3.75/4.20mmL=26mm Countersink, SP Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$85
MT-GDN50 Ø5/6mmL=26.8mm Countersink, WP Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$85
MT-PP240 Ø2.40mmL=24mm Parallel pin Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$19
64.
Cat. No. Dimension Description Material Placement Additional info.
M4 Advanced Surgical Kit
Cat. No. Dimension Description Material Placement Additional info.
MT-RI030 L=84mm Monoblock ratchet - See p. no. i18-19
STANDALONE
INSIDEKIT
$150
MT-LRH20 L=32.3mm Long insertion tool, internal hex. Stainless steel See p. no. i18-19
STANDALONE
INSIDEKIT
$47
MT-SRH20 L=22.3mm Short insertion tool, internal hex. Stainless steel See p. no. i18-19
STANDALONE
INSIDEKIT
$47
MT-RMR10 L=38.5mm Long direct hand andratchet key Stainless steel See p. no.
i18-19 STANDALONE
INSIDEKIT
$47
MT-RDL30 L=23.5mm Long driver for 0.05 inch hex. Stainless steel See p. no. i18-19
STANDALONE
INSIDEKIT
$45
5Procedures
Ø3.30
Ø3.75 Ø4.20
Ø5
Ø6
65.
M4 Drilling Set
Cat. No. Dimension Description Material Placement Additional info.
MT-TDN28 Ø2.80mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no. i20 STAND
ALONEINSIDE
KIT
$85
MT-TDN32 Ø3.20mmL=37.6mm Twist drill, external irrigation Stainless steel See p. no. i20 STAND
ALONEINSIDE
KIT
$85
MT-TDN38 Ø3.80mmL=37.8mm Twist drill, external irrigation Stainless steel See p. no. i20 STAND
ALONEINSIDE
KIT
$85
MT-TDN45 Ø4.50mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no. i20 STAND
ALONEINSIDE
KIT
$85
MT-TDN50 Ø5mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no. i20 STAND
ALONEINSIDE
KIT
$85
MT-TDN55 Ø5.50mmL=38.2mm Twist drill, external irrigation Stainless steel See p. no. i20 STAND
ALONEINSIDE
KIT
$85
M4 Drilling Set
Kits
MK-0014 $769
66.
Cat. No. Dimension Description Material Placement Additional info.
M4 Drilling Set
Cat. No. Dimension Description Material Placement Additional info.
MT-CSN33 Ø3.30mmL=31mm Countersink, NP Stainless steel See p. no. i20 STAND
ALONEINSIDE
KIT
$85
MT-GDN33 Ø3.75/4.20mmL=26mm Countersink, SP Stainless steel See p. no. i20 STAND
ALONEINSIDE
KIT
$85
MT-GDN50 Ø5/6mmL=26.8mm Countersink, WP Stainless steel See p. no. i20 STAND
ALONEINSIDE
KIT
$85
6Depth Options
6mm
8mm
10m
m
11.5
mm
13m
m
16m
m
67.
UNO Implant Surgical Kit
Cat. No. Dimension Description Material Placement Additional info.
MT-SMD10 L=30mm Spade marking drill Stainless steel See p. no. i24-25
STANDALONE
INSIDEKIT
$85
MT-P2416 Ø2.40mmL=37.5mm
Pilot drill with built-in stopper, height 16mm Stainless steel See p. no.
i24-25 STANDALONE
INSIDEKIT
$85
MT-TDN20 Ø2mmL=37.3mm Pilot drill, external irrigation Stainless steel See p. no.
i24-25 STANDALONE
$85
MT-TDT30 Ø3mmL=37.5mm Twist drill, external irrigation Stainless steel See p. no.
i24-25 STANDALONE
INSIDEKIT
MT-BTT20 Ø2mmL=28.5mm Body try-in Titanium See p. no.
i24-25 STANDALONE
INSIDEKIT
MT-UML21 L=30mm UNO One-Piece long motor adapter Stainless steel See p. no.
i24-25 STANDALONE
INSIDEKIT
$45
UNO Implant Surgical Kit
Kits
MK-0036
Not available in USA
68.
Cat. No. Dimension Description Material Placement Additional info.
UNO Implant Surgical Kit
Cat. No. Dimension Description Material Placement Additional info.
MT-PP001 Ø2.0/3.20mmL=24mm Parallel pin Stainless steel See p. no.
i24-25 STANDALONE
INSIDEKIT
$19
MT-RI030 L=84mm Monoblock ratchet - See p. no. i24-25
STANDALONE
INSIDEKIT
$150
MT-RKL21 L=18mm UNO One-Piece long key Stainless steel See p. no. i24-25
STANDALONE
INSIDEKIT
MT-RKS15 L=13.5mm UNO One-Piece short key Stainless steel See p. no. i24-25
STANDALONE
INSIDEKIT
KeyHeights2 13.5mm
18mm
Not available in USA
69.
SEVEN Standard Platform Drill Stoppers
Kit
Cat. No. Dimension Description Material Placement Additional info.
Following the use of MIS length-based pilot drills, the SEVEN Standard Platform Drill Stoppers Kit ensures drilling to the exact depth desired. The kit includes the most commonly used lengths: 8, 10, 11.5 and 13mm.
For more info see p. no. i28
SEVEN Standard Platform Drill Stoppers Kit
Kits
MK-BS001 $275
70.
Cat. No. Dimension Description Material Placement Additional info.
SEVEN Drill Stopper Kits - Depth Based
Cat. No. Dimension Description Material Placement Additional info.
MK-SDS06 L=6mm Drill stoppers kit for 6mm SEVEN implants Stainless steel See p. no. i29
$275
MK-SDS08 L=8mm Drill stoppers kit for 8mm SEVEN implants Stainless steel See p. no. i29
$275
MK-SDS10 L=10mm Drill stoppers kit for 10mm SEVEN implants Stainless steel See p. no. i29
$275
MK-SDS11 L=11.5mm Drill stoppers kit for 11.5mm SEVEN implants Stainless steel See p. no. i29
$275
MK-SDS13 L=13mm Drill stoppers kit for 13mm SEVEN implants Stainless steel See p. no. i29
$275
SEVEN Drill Stopper Kits - Depth Based
Kits
MK-SDS## $275
71.
Bone Compression Kit
Cat. No. Dimension Description Material Placement Additional info.
MO-CO160 Ø1.80-2.90mmL=25mm Convex compress screw Stainless steel See p. no.
i22-23INSIDE
KIT
MO-CO200 Ø2.30-3.30mmL=25mm Convex compress screw Stainless steel See p. no.
i22-23INSIDE
KIT
MO-CO240 Ø2.70-3.70mmL=25mm Convex compress screw Stainless steel See p. no.
i22-23INSIDE
KIT
MO-CO280 Ø3.1-4.50mmL=25mm Convex compress screw Stainless steel See p. no.
i22-23INSIDE
KIT
MO-SO300 Ø3mmL=25mm Concave sinus screw Stainless steel See p. no.
i22-23INSIDE
KIT
MO-SO350 Ø3.50mmL=25mm Concave sinus screw Stainless steel See p. no.
i22-23INSIDE
KIT
Bone Compression Kit
Kits
MK-0020 $769
Sold in Kit Only
72.
Cat. No. Dimension Description Material Placement Additional info.
Bone Compression Kit
Cat. No. Dimension Description Material Placement Additional info.
MO-SO400 Ø4mmL=25mm Concave sinus screw Stainless steel See p. no.
i22-23INSIDE
KIT
MT-SMD10 L=30mm Spade marking drill Stainless steel See p. no. i22-23
STANDALONE
INSIDEKIT
$37
MT-HSI10 L=24.4mm Short insertion tool, internal hex. Stainless steel See p. no. i22-23
STANDALONE
INSIDEKIT
$47
MT-HLI10 L=28.2mm Long insertion tool, internal hex. Stainless steel See p. no. i22-23
STANDALONE
INSIDEKIT
$47
MT-LRH20 L=32.3mm Long insertion tool, internal hex. Stainless steel See p. no. i22-23
STANDALONE
INSIDEKIT
$47
MT-SRH20 L=22.3mm Short insertion tool, internal hex. Stainless steel See p. no. i22-23
STANDALONE
INSIDEKIT
$47
MT-RI030 L=84mm Monoblock ratchet - See p. no. i22-23
STANDALONE
INSIDEKIT
$150
SurgicalProcedures2
Sinus LiftingBone Compression
Sold in Kit Only
73.
Sinus Lift Osteotomes Set
Cat. No. Dimension Description Material Placement Additional info.
The MIS Sinus Lift Osteotomes Set is used for closed sinus augmentation procedures. The set includes four straight and four bayonet concave tools. All tools are laser marked for depths of: 6, 11 and 15mm, and are equipped with stoppers for convenience and safety.
Sinus Lift Osteotomes Set
Kits
MK-0023 $620
74.
Cat. No. Dimension Description Material Placement Additional info.
Convex Osteotome Set
Cat. No. Dimension Description Material Placement Additional info.
The MIS Convex Osteotomes Set is used for closed sinus augmentation procedures. The set includes four straight and four bayonet convex tools. All tools are laser marked for depths of: 6, 11 and 15mm, and are equipped with stoppers for convenience and safety.
Convex Osteotome Set
Kits
MK-0024 $620
75.
Abrahami Drill Guide Kit
Cat. No. Dimension Description Material Placement Additional info.
The Abrahami Drill Guide Kit was designed to enable the dental surgeon to accurately locate and drill the osteotomies of two or more consecutive implants with optimal spacing, angulation and parallelism. In standard cases, the Abrahami Kit may be used as a simple alternative to a surgical guide. Although designed as a surgical tool, the Abrahami Drill Guide Kit can also be used as a planning tool.
For more info see p. no. i30
Abrahami Drill Guide Kit
Kits
MK-0011 $450
76.
Cat. No. Dimension Description Material Placement Additional info.
Yeung Bone Harvest Kit
Cat. No. Dimension Description Material Placement Additional info.
MT-BC280 Ø2.80mm Bone harvest drill Stainless steel See p. no. i21 STANDALONE
INSIDEKIT
MT-BC320 Ø3.20mm Bone harvest drill Stainless steel See p. no. i21 STANDALONE
INSIDEKIT
MT-BC380 Ø3.80mm Bone harvest drill Stainless steel See p. no. i21 STANDALONE
INSIDEKIT
MT-BC450 Ø4.50mm Bone harvest drill Stainless steel See p. no. i21 STANDALONE
INSIDEKIT
Yeung Bone Harvest Kit
Kits
MK-BH26 $435
Sold in Kit Only
77.
Prosthetic Tools Kit
Cat. No. Dimension Description Material Placement Additional info.
MM-LCT10 L=83mm Locator core tool Steel / Titanium Nitride coated Ti
See p. no. i26-27
STANDALONE
INSIDEKIT
$82
MT-MUR02 L=18.7mm Angulated Multi-Unit short key Stainless steel See p. no. i26-27
STANDALONE
INSIDEKIT
$49
MT-MURL2 L=21mm Straight Multi-Unit long ratchet key Stainless steel See p. no.
i26-27 STANDALONE
INSIDEKIT
$49
MT-RB225 L=22mm Ball attachment anchor key Stainless steel See p. no. i26-27
STANDALONE
INSIDEKIT
$50
MT-RDL30 L=23.5mm Long driver for 0.05 inch hex. Stainless steel See p. no. i26-27
STANDALONE
INSIDEKIT
$45
MT-RDS30 L=18.5mm Short driver for 0.05 inch hex. Stainless steel See p. no. i26-27
STANDALONE
INSIDEKIT
$45
Prosthetic Tools Kit
Kits
MK-0039 $1250
78.
Cat. No. Dimension Description Material Placement Additional info.
Prosthetic Tools Kit
Cat. No. Dimension Description Material Placement Additional info.
MT-RE160 L=28.5mm Int. connection abutment extractor, NP Titanium See p. no.
i26-27 STANDALONE
INSIDEKIT
$50
MT-RE172 L=28.5mm Int. connection abutment extractor Titanium See p. no.
i26-27 STANDALONE
INSIDEKIT
$50
MM-RSD15 L=19mm Locator short torque wrench driver Stainless steel See p. no.
i26-27 STANDALONE
INSIDEKIT
$47
MM-RSD20 L=24mm Locator long torque wrench driver Stainless steel See p. no.
i26-27 STANDALONE
INSIDEKIT
$47
MT-SM005 L=24mm Short motor adapter for 0.05 inch hex. Stainless steel See p. no.
i26-27 STANDALONE
$45
MT-LM005 L=30mm Long motor adapter for 0.05 inch hex. Stainless steel See p. no.
i26-27 STANDALONE
INSIDEKIT
$45
MT-UN002 L=24mm Implant analog for universal hand driver, Internal hex., NP Stainless steel See p. no.
i26-27 STANDALONE
INSIDEKIT
$48
MT-US002 L=24mm Implant analog for universal hand driver, internal hex., SP Stainless steel See p. no.
i26-27 STANDALONE
INSIDEKIT
$48
MT-UW002 L=24mm Implant analog for universal hand driver, internal hex., WP Stainless steel See p. no.
i26-27 STANDALONE
INSIDEKIT
$48
MT-MSD20 L=140mm Surgical adapter driver Stainless steel + Aluminum
See p. no. i26-27
STANDALONE
INSIDEKIT
$120
MT-URA10 L=27mm Universal hand driver ratchet head adapter Stainless steel See p. no.
i26-27 STANDALONE
INSIDEKIT
$48
79.
Prosthetic Tools Kit
Cat. No. Dimension Description Material Placement Additional info.
ET-IT001 - OT-Equator handling tools - See p. no. i26-27
STANDALONE
INSIDEKIT
$119
CT-UN001 L=24mm Implant analog for universal hand driver, conical conn., NP Stainless steel See p. no.
i26-27 STANDALONE
INSIDEKIT
$48
CT-US001 L=24mm Implant analog for universal hand driver, conical conn., SP Stainless steel See p. no.
i26-27 STANDALONE
INSIDEKIT
$48
CT-UW001 L=24mm Implant analog for universal hand driver, conical conn., WP Stainless steel See p. no.
i26-27 STANDALONE
INSIDEKIT
$48
MT-RI040 L=95mm Torque ratchet for prosthetic screws - See p. no.
i26-27 STANDALONE
INSIDEKIT
$235
Hex.Connection
ConicalConnection
Prosthetic Options 2 Implant
Connections4
80.
Cat. No. Dimension Description Material Placement Additional info.
Prosthetic Planning Kit
Cat. No. Dimension Description Material Placement Additional info.
The MIS Prosthetic Planning Kit consists of replicas of the most commonly used MIS cement retained abutments. The kit allows doctors and technicians to evaluate different abutments and to select the best fitting size, diameter and shape on a case-by-case basis. The replicas can be used either directly in the patient's mouth or on implant-level master models. The titanium superstructures are color-coded in accordance with MIS platforms: purple for Standard and green for Wide.
For more info see p. no. i32-33
Prosthetic Planning Kit
Kits
MK-0040 $375
81.
Abutment Holding System Kit
Cat. No. Dimension Description Material Placement Additional info.
The Abutment Holding System enables the convenient grip of prosthetic components to allow simple and easy preparation of ceramic and titanium ae kit includes inserts for all MIS implants connections and platforms.
Abutment Holding System Kit
Kits
MK-0001 $149
82.
Cat. No. Dimension Description Material Placement Additional info.
Crown Set
Cat. No. Dimension Description Material Placement Additional info.
The MIS Crown Set is a delivery system comprised of an auto-mix, easy-to-use dispensing syringe and disposable dispensing tips. The resin-based cement combines high retention properties along with the ability to remove a restoration if needed. The cement sets within 90 seconds and allows easy removal of excess material. Note: Abutments should be sand-blasted prior to cementation to achieve maximum retention.
Crown Set
Kits
MK-0022
Not available in USA
83.
Zircon Diamond Burr Set
Cat. No. Dimension Description Material Placement Additional info.
MT-A4022 - Diamond burr, 2.20mm - See p. no. i31INSIDEKIT
MT-B4018 - Diamond burr, 1.80mm - See p. no. i31INSIDEKIT
MT-F2121 - Diamond burr, 2.10mm - See p. no. i31INSIDEKIT
MT-K2023 - Diamond burr, 2.30mm - See p. no. i31INSIDEKIT
MT-C3125 - Diamond burr, 2.50mm - See p. no. i31INSIDEKIT
Zircon Diamond Burr Set
Kits
MK-DB01 $119
Sold in Kit Only
84.
Cat. No. Dimension Description Material Placement Additional info.
Prosthetic Introduction Case
Cat. No. Dimension Description Material Placement Additional info.
MIS Prosthetic Introduction Case offers a wide variety of MIS prosthetic options. The kit includes stone models representative of common clinical cases, the MIS Prosthetic Planning Kit, with a wide variety of cement retained prosthetic options for use on the models, and the MIS Abutment Holding System Kit.
For more info see p. no. i36-37
Prosthetic Introduction Case
Kits
MK-PIC01
Call For Price: 1-866-797-1333
85.
Control Unit
Cat. No. Dimension Description Material Placement Additional info.
MWH-M0131 - Control unit, 70Ncm(230v) - See p. no.
i34-35
MWH-M0132 - Control unit, 70Ncm(115v) - See p. no.
i34-35
$3790
MWH-2STUB - Irrigation system 1/2 way - See p. no. i34-35
MWH-MMOTR - Micro motor and cord kit - See p. no. i34-35
MWH-M7559 - Surgical contra-angle 20:1 - See p. no. i34-35
MWH-CAL59 - Surgical contra-angle LED 20:1 - See p. no. i34-35
Control Unit
Kits
MWH-M0131 / 132 $3790
Not available in USA Call For Price: 1-866-797-1333
86.
LINK
IMPLANT SYSTEMS
KITS
UNO ONE-PIECE
MIS MULTIFIXSEVEN
TOOLS
M4
Toll Free 1-866-797-1333
MIS superstructures are designed to meet all prosthetic needs and fit all accepted working methods. Abutments are available in a wide range of heights, gingival collar heights, angles and margin types. MIS offers solutions for both screw retained and cement retained restorations.
MIS temporary plastic abutments are made of PEEK (polyetheretherketone), a synthetic biocompatible polymer, characterized by high mechanical strength and inert chemical properties. PEEK abutments allow for sustainable temporary restorations that last up to 6 months.
MIS also offers Titanium Base abutments, compatible with most CAD/CAM systems' software. These abutments meet the specific requirements of all MIS Internal hex. implant systems. Allowing for a large variety of prosthetic options, the Titanium Base abutments are available for all platform sizes, ensuring superior strength, reliability and esthetic implant supported restorations.
PROSTHETIC OPTIONS.
Analog and Impression Coping
Cat. No. Dimension Description Material Platform Additional info.
MN-IT100MD-IT100MW-IT100
H=9mmH=9mmH=9mm
Direct impression coping for closed tray, internal hex. Stainless steel -WPSPNP
NPSPWP
$38
MN-GP100MD-GP100MD-GP100
L=16.5mmL=16.5mmL=16.5mm
Direct impression coping guide pin, internal hex. Titanium -WPSPNP
NPSPWP
$21
MN-I0330MD-I0375MW-I0470
H=11mmH=11mmH=11mm
Direct impression coping for open tray, internal hex. Stainless steel -WPSPNP
NPSPWP
$38
MN-G0160MD-G0213MD-G0213
L=21mmL=21.3mmL=21.3mm
Direct impression coping guide pin for open tray Titanium -WPSPNP
NPSPWP
$21
MN-IT300MD-IT300MW-IT300
H=7.8mmH=8mmH=8mm
Direct impression coping for closed tray, internal hex. Titanium -WPSPNP
NPSPWP
$38
Analog and Impression Coping
Analog and Impression
Coping
90.
Cat. No. Dimension Description Material Platform Additional info.
Analog and Impression Coping
Cat. No. Dimension Description Material Platform Additional info.
MN-PF330MD-PF375
H=11mmH=11mm Direct press fit for closed tray Titanium -SPNP
NPSP
$38
MW-PF550 H=11mm Direct press fit for closed tray, WP Titanium -WP
WP
$38
MN-RSM10MD-RSM10MW-RSM10
L=12mmL=12mmL=12mm
Implant analog, internal hex. Stainless steel -WPSPNP
NPSPWP
$20
Standard
Wide
Narrow
3Platforms
WP
SP
NP
91.
Temporary Restoration Options
Cat. No. Dimension Description Material Platform Additional info.
MN-TPA10MD-TPA10MW-TPA10
Ø4mm, H=11mmØ4.75mm, H=11mmØ5.5mm, H=11mm
Temporary plastic abutment, Internal hex. PEEK -WPSPNP
NPSPWP
$42
MN-TPA12MD-TPA12MW-TPA12
Ø3.5, H=11mmØ3.75, H=11mmØ4.5, H=11mm
Narrow profile temporary plastic abutment, internal hex. PEEK -WPSPNP
NPSPWP
$42
MD-TPH50MW-TPH50
Ø5mm, H=12mmØ5.50mm, H=12mm
Direct temporary plastic cylinder, internal hex. PEEK -WPSP
SPWP
$42
MN-TC013MD-TC013MW-TC013
Ø4mm, H=11mmØ4.8mm, H=11mmØ5.5mm, H=11mm
Direct temporary free rotation cylinder, internal hex. Titanium -WPSPNP
NPSPWP
$46
MN-TCH13MD-TCH13MW-TCH13
Ø4mm, H=11mmØ4.8mm, H=11mmØ5.5mm, H=11mm
Direct temporary anti-rotation cylinder, internal hex. Titanium -WPSPNP
NPSPWP
$46
Temporary Restoration Options
Temporary Restoration
92.
Cat. No. Dimension Description Material Platform Additional info.
Esthetic Cemented Restoration Options
Cat. No. Dimension Description Material Platform Additional info.
MD-A0010MW-P0010
H=9mmH=9mm
Esthetic 1mm abutment, internal hex. Titanium See p. no. i38WPSP
SPWP
$76
MD-P0030 H=11mm Esthetic 3mm abutment, internal hex. Titanium See p. no. i38SP
SP
$76
MD-A1510MW-P1510
H=9mmH=9mm
Esthetic 15° 1mm angulated abutment, internal hex. Titanium See p. no. i38WPSP
SPWP
$79
MN-AN020 H=8mm 20° Angulated abutment, internal hex. Titanium See p. no. i38NP
NP
$79
MD-AN151MW-AN151
H=9mmH=9mm
15° 1mm Angulated abutment, internal hex. Titanium See p. no. i38WPSP
SPWP
$79
MD-P1530 H=11mm Esthetic 15° 3mm angulated abutment, internal hex. Titanium See p. no. i38SP
SP
$79
Esthetic Cemented Restoration Options
Cemented Restoration
93.
Esthetic Cemented Restoration Options
Cat. No. Dimension Description Material Platform Additional info.
MD-A2510 H=9mm Esthetic 25° 1mm angulated abutment, internal hex. Titanium See p. no. i38SP
SP
$79
MD-AN251 H=8.5mm 25° 1mm Angulated abutment, internal hex. Titanium See p. no. i38SP
SP
$79
MD-P2530 H=11mm Esthetic 25° 3mm angulated abutment, internal hex. Titanium See p. no. i38SP
SP
$79
MD-S0200 L=6.9mm Mini prosthetic screw, 30 Ncm Titanium See p. no. i38WPSP
SPWP
$20
MN-S0160MD-S0220MD-S0220
L=7.6mmL=7.6mmL=7.6mm
Direct prosthetic screw, 30 Ncm Titanium See p. no. i38WPSPNP
NPSPWP
$20
MD-G0220 L=7.70mm Direct gold prosthetic screw, 20 Ncm Gold-s See p. no. i38WPSP
SPWP
$60
MD-S0222 L=12mm Medium prosthetic screw, 30 Ncm Titanium See p. no. i38WPSP
SPWP
$20
MD-S0224 L=14mm Long prosthetic screw, 30 Ncm Titanium See p. no. i38WPSP
SPWP
$20
94.
Cat. No. Dimension Description Material Platform Additional info.
Standard Cemented Restoration Options
Cat. No. Dimension Description Material Platform Additional info.
MN-MAC10MD-MAC10MW-MAC10
Ø4mm, H=11mmØ4.75mm, H=11mmØ5.5mm, H=11mm
Cementing post Titanium -WPSPNP
NPSPWP
$67
MD-WMAC1MW-WMAC1
Ø5.5mm, H=11mmØ6.5mm, H=11mm Wide profile cementing post Titanium -WPSP
SPWP
$67
MD-MACF1 Ø4.75mmH=11mm
Friction fit cementing post with platform switching Titanium -SP
SP
$89
MD-CTP10MW-CTP10
Ø3.75mm, H=8.5mmØ5.5mm, H=8.5mm Narrow profile cementing post Titanium -WPSP
SPWP
$67
MD-S0200 L=6.9mm Mini prosthetic screw, 30 Ncm Titanium -WPSP
SPWP
$20
MN-S0160MD-S0220MD-S0220
L=7.6mmL=7.6mmL=7.6mm
Direct prosthetic screw, 30 Ncm Titanium -WPSPNP
NPSPWP
$20
Standard Cemented Restoration Options
Cemented Restoration
95.
Standard Cemented Restoration Options
Cat. No. Dimension Description Material Platform Additional info.
MD-S0222 L=12mm Medium prosthetic screw, 30 Ncm Titanium -WPSP
SPWP
$20
MD-S0224 L=14mm Long prosthetic screw, 30 Ncm Titanium -WPSP
SPWP
$20
MD-G0220 L=7.70mm Direct gold prosthetic screw, 20 Ncm Gold-s -WPSP
SPWP
$60
4Screw Height Options
6.9mm 7.6mm
12mm
14mm
96.
Cat. No. Dimension Description Material Platform Additional info.
CPK - Complete Prosthetic Kit
Cat. No. Dimension Description Material Platform Additional info.
MK-NPK41MK-CPK41MK-WPK41
H=1mm, C=4mmH=1mm, C=4mmH=1mm, C=4mm
Complete prosthetic kit Titanium See p. no. i39WPSPNP
NPSPWP
$99
MK-NPK42MK-CPK42MK-WPK42
H=2mm, C=4mmH=2mm, C=4mmH=2mm, C=4mm
Complete prosthetic kit Titanium See p. no. i39WPSPNP
NPSPWP
$99
MK-NPK43MK-CPK43MK-WPK43
H=3mm, C=4mmH=3mm, C=4mmH=3mm, C=4mm
Complete prosthetic kit Titanium See p. no. i39WPSPNP
NPSPWP
$99
MK-NPK44MK-CPK44MK-WPK44
H=4mm, C=4mmH=4mm, C=4mmH=4mm, C=4mm
Complete prosthetic kit Titanium See p. no. i39WPSPNP
NPSPWP
$99
MK-NPK61MK-CPK61MK-WPK61
H=1mm, C=6mmH=1mm, C=6mmH=1mm, C=6mm
Complete prosthetic kit Titanium See p. no. i39WPSPNP
NPSPWP
$99
MK-NPK62MK-CPK62MK-WPK62
H=2mm, C=6mmH=2mm, C=6mmH=2mm, C=6mm
Complete prosthetic kit Titanium See p. no. i39WPSPNP
NPSPWP
$99
CPK - Complete Prosthetic Kit
Cemented Restoration
C=4,6,8mm
H=1,2,3,4mm
97.
CPK - Complete Prosthetic Kit
Cat. No. Dimension Description Material Platform Additional info.
MK-NPK63MK-CPK63MK-WPK63
H=3mm, C=6mmH=3mm, C=6mmH=3mm, C=6mm
Complete prosthetic kit Titanium See p. no. i39WPSPNP
NPSPWP
$99
MK-NPK64MK-CPK64MK-WPK64
H=4mm, C=6mmH=4mm, C=6mmH=4mm, C=6mm
Complete prosthetic kit Titanium See p. no. i39WPSPNP
NPSPWP
$99
MK-CPK81MK-WPK81
H=1mm, C=8mmH=1mm, C=8mm Complete prosthetic kit Titanium See p. no. i39WPSP
SPWP
$99
MK-CPK82MK-WPK82
H=2mm, C=8mmH=2mm, C=8mm Complete prosthetic kit Titanium See p. no. i39WPSP
SPWP
$99
MK-CPK83MK-WPK83
H=3mm, C=8mmH=3mm, C=8mm Complete prosthetic kit Titanium See p. no. i39WPSP
SPWP
$99
MK-CPK84MK-WPK84
H=4mm, C=8mmH=4mm, C=8mm Complete prosthetic kit Titanium See p. no. i39WPSP
SPWP
$99
MN-CPK41MD-CPK41MW-CPK41
H=1mm, C=4mmH=1mm, C=4mmH=1mm, C=4mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSPNP
NPSPWP
MN-CPK42MD-CPK42MW-CPK42
H=2mm, C=4mmH=2mm, C=4mmH=2mm, C=4mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSPNP
NPSPWP
MN-CPK43MD-CPK43MW-CPK43
H=3mm, C=4mmH=3mm, C=4mmH=3mm, C=4mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSPNP
NPSPWP
MN-CPK44MD-CPK44MW-CPK44
H=4mm, C=4mmH=4mm, C=4mmH=4mm, C=4mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSPNP
NPSPWP
MN-CPK61MD-CPK61MW-CPK61
H=1mm, C=6mmH=1mm, C=6mmH=1mm, C=6mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSPNP
NPSPWP
Call For Price: 1-866-797-1333
98.
Cat. No. Dimension Description Material Platform Additional info.
CPK - Complete Prosthetic Kit
Cat. No. Dimension Description Material Platform Additional info.
MN-CPK62MD-CPK62MW-CPK62
H=2mm, C=6mmH=2mm, C=6mmH=2mm, C=6mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSPNP
NPSPWP
MN-CPK63MD-CPK63MW-CPK63
H=3mm, C=6mmH=3mm, C=6mmH=3mm, C=6mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSPNP
NPSPWP
MN-CPK64MD-CPK64MW-CPK64
H=4mm, C=6mmH=4mm, C=6mmH=4mm, C=6mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSPNP
NPSPWP
MD-CPK81MW-CPK81
H=1mm, C=8mmH=1mm, C=8mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSP
SPWP
MD-CPK82MW-CPK82
H=2mm, C=8mmH=2mm, C=8mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSP
SPWP
MD-CPK83MW-CPK83
H=3mm, C=8mmH=3mm, C=8mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSP
SPWP
MD-CPK84MW-CPK84
H=4mm, C=8mmH=4mm, C=8mm
Transgingival abutment, internal hex. Titanium See p. no. i39WPSP
SPWP
Gingival Heights 2 3Crown
HeightsCrown Heights4
H C
12
34
46
8
Standard & Wide PlatformNarrow Platform
Call For Price: 1-866-797-1333
99.
Zirconia Incisor Abutment Set
Cat. No. Dimension Description Material Platform Additional info.
MK-NIC6MK-SIC6
H=8.5mmH=8.5mm
Zirconia pre-cemented incisor 15º abutment set, internal hex. Titanium/Zirconia -SPNP
NPSP
$145
MK-NIZ6MK-SIZ6
H=8.5mmH=8.5mm
Zirconia non-cemented incisor 15º abutment set, internal hex. Titanium/Zirconia -SPNP
NPSP
$145
Zirconia Incisor Abutment Set
Cemented Restoration
8.5mm
2mmH1mm
100.
Cat. No. Dimension Description Material Platform Additional info.
Zirconia Premolar Abutment Set
Cat. No. Dimension Description Material Platform Additional info.
MK-SPC4MK-WPC4
H=8.4mmH=8.4mm
Zirconia pre-cemented premolar abutment set, internal hex. Titanium/Zirconia -WPSP
SPWP
$145
MK-SPZ4MK-WPZ4
H=8.4mmH=8.4mm
Zirconia non-cemented premolar abutment set, internal hex., SP
Titanium/Zirconia -WPSP
SPWP
$145
Zirconia Premolar Abutment Set
Cemented Restoration
8.4mm
2.7mm1.8mm
H
101.
Screw Retained Restoration Options
Cat. No. Dimension Description Material Platform Additional info.
MN-CPH13MD-CPH13MW-CPH13
Ø3.50mm, H=11mmØ3.75mm, H=11mmØ4.50mm, H=11mm
Direct plastic cylinder with hex., internal hex. Burnout Plastic -WPSPNP
NPSPWP
$42
MN-CP013MD-CP013MW-CP013
Ø3.50mm, H=11mmØ 3.75mm, H=11mmØ4.50mm, H=11mm
Direct plastic cylinder without hex., internal hex. Burnout Plastic -WPSPNP
NPSPWP
$42
MD-CPH50MW-CPH60
Ø5mm, H=11mmØ6.50mm, H=11mm
Wide profile direct plastic cylinder with hex., Internal hex. Burnout Plastic -WPSP
SPWP
$42
MD-CP050MW-CP060
Ø5mm, H=11mmØ6.50mm, H=11mm
Wide profile direct plastic cylinder without hex. Burnout Plastic -WPSP
SPWP
$42
MN-GPC10MD-GPC10MW-GPC10
Ø4.50mm, H=15.5mmØ5mm, H=15mmØ5.50mm, H=15mm
Direct gold plastic cylinder with hex.
Burnout Plastic + gold-a -WPSPNP
NPSPWP
$120
MN-GP010MD-GP010MW-GP010
Ø4.50mm, H=15.5mmØ5mm, H=15mmØ5.50mm, H=15mm
Direct gold plastic cylinder without hex.
Burnout Plastic + gold -a -WPSPNP
NPSPWP
$120
Screw Retained Restoration Options
Screw Retained
Restoration
102.
Cat. No. Dimension Description Material Platform Additional info.
Screw Retained Restoration Options
Cat. No. Dimension Description Material Platform Additional info.
MN-CCI10MD-CCI10MW-CCI10
Ø4.5mm, H=15.5mmØ5mm, H=15mmØ5.5mm, H=15mm
Direct anti-rotation CoCr plastic cylinder, Internal hex. Cobalt-Chrome -WPSPNP
NPSPWP
MN-CC010MD-CC010MW-CC010
Ø4.5mm, H=15.5mmØ5mm, H=15mmØ5.5mm, H=15mm
Direct free rotation CoCr plastic cylinder Cobalt-Chrome -WPSPNP
NPSPWP
MD-G0220 L=7.70mm Direct gold prosthetic screw, 20 Ncm Gold-s -WPSP
SPWP
$60
MD-S0200 L=6.9mm Mini prosthetic screw, 30 Ncm Titanium -WPSP
SPWP
$20
MN-S0160MD-S0220MD-S0220
L=7.6mmL=7.6mmL=7.6mm
Direct prosthetic screw, 30 Ncm Titanium -WPSPNP
NPSPWP
$20
MD-S0222 L=12mm Medium prosthetic screw, 30 Ncm Titanium -WPSP
SPWP
$20
MD-S0224 L=14mm Long prosthetic screw, 30 Ncm Titanium -WPSP
SPWP
$20
2 Types of Connections
Free Rotational Connection Anti-Rotational Connection
Call For Price: 1-866-797-1333
103.
Multi-Unit System
Cat. No. Dimension Description Material Platform Additional info.
MA-N1480MA-S1480MA-W1480
H=1mmH=1mmH=1mm
Multi-Unit abutment, internal hex., 30Ncm Titanium See p. no. i42WPSPNP
NPSPWP
$69
MA-N2480MA-S2480
H=2mmH=2mm
Multi-Unit abutment, internal hex., 30Ncm Titanium See p. no. i42SPNP
NPSP
$69
MA-N3480MA-S3480MA-W3480
H=3mmH=3mmH=3mm
Multi-Unit abutment, internal hex., 30Ncm Titanium See p. no. i42WPSPNP
NPSPWP
$69
MA-N4480MA-S4480
H=4mmH=4mm
Multi-Unit abutment, internal hex., 30Ncm Titanium See p. no. i42SPNP
NPSP
$69
MA-N5480MA-S5480MA-W5480
H=5mmH=5mmH=5mm
Multi-Unit abutment, internal hex., 30Ncm Titanium See p. no. i42WPSPNP
NPSPWP
$69
MA-SA171MA-WA171
H=1mmH=1mm
Multi-Unit 17° angulated abutment, Internal hex., 20Ncm Titanium See p. no. i42WPSP
SPWP
$169
Multi-Unit System
Screw Retained
Restoration
21°
17°
2.1mm
21°
30°
3.3mm2.75mm
1mm1mm
2.1mm
HH
104.
Cat. No. Dimension Description Material Platform Additional info.
Multi-Unit System
Cat. No. Dimension Description Material Platform Additional info.
MA-SA301MA-WA301
H=1mmH=1mm
Multi-Unit 30° angulated abutment, internal hex., 20Ncm Titanium See p. no. i42WPSP
SPWP
$169
MU-RSM48 L=12mm Analog for Multi-Unit Titanium See p. no. i42
$20
MU-H4480 L=3.3mm Healing cap for Multi-Unit Titanium See p. no. i42
$48
MU-I0480 L=22mm Impression coping, open tray, for Multi-Unit Titanium See p. no. i42
$40
MU-IT480 L=8mm Impression coping, closed tray, for Multi-Unit Titanium See p. no. i42
$40
MU-T0480 L=10mm Titanium temporary cylinder for Multi-Unit Titanium See p. no. i42
$58
MU-S0220 L=3.8mm Prosthetic screw for Multi-Unit, 25Ncm Titanium See p. no. i42
$23
MU-SP102 H=10mm Scan post for Multi-Unit abutments Titanium See p. no. i42
$79
MU-CP048 L=10mm Plastic cylinder for Multi-Unit Burnout plastic See p. no. i42
$58
MU-MG480 L=14.5mm Direct gold for Multi-Unit Burnout plastic+gold-a See p. no. i42
$120
MU-BGC48 L=3.3mm Gold bar coping abutment for Multi-Unit Gold-e See p. no. i42
$97
105.
Multi-Unit System
Cat. No. Dimension Description Material Platform Additional info.
MU-CC480 L=3.3mm CAD/CAM cementing cap for Multi-Unit Titanium See p. no. i42
$48
MU-G0220 L=3.8mm Prosthetic gold screw for Multi-Unit, 20Ncm Gold S See p. no. i42
$60
MT-NMK02 L=22mm Multi-Unit key Stainless steel See p. no. i42
$49
MT-MUR02 L=18.7mm Angulated Multi-Unit short key Stainless steel See p. no. i42
$49
MT-MURL2 L=21mm Straight Multi-Unit long ratchet key Stainless steel See p. no. i42
$49
MT-MURS2 L=16mm Straight Multi-Unit short ratchet key Stainless steel See p. no. i42
$49
MT-MUML2 L=31mm Straight Multi-Unit long motor key Stainless steel See p. no. i42
$49
MT-MUMS2 L=24mm Straight Multi-Unit short motor key Stainless steel See p. no. i42
$49
106.
Cat. No. Dimension Description Material Platform Additional info.
OT-Equator Kits
Cat. No. Dimension Description Material Platform Additional info.
Cat. No. Dimension Description Material Platform Additional info.
1.7mm
1-5mmH
OT-Equator Kits
Overdenture
107.
OT-Equator Kits
Cat. No. Dimension Description Material Platform Additional info.
MK-NOE1MK-SOE1MK-WOE1
H=1mmH=1mmH=1mm
OT-Equator kit, internal hex. - See p. no. i40-41
WPSPNP
NPSPWP
$125
MK-NOE2MK-SOE2
H=2mmH=2mm OT-Equator kit, internal hex. - See p. no.
i40-41SPNP
NPSP
$125
MK-NOE3MK-SOE3MK-WOE3
H=3mmH=3mmH=3mm
OT-Equator kit, internal hex. - See p. no. i40-41
WPSPNP
NPSPWP
$125
MK-NOE4MK-SOE4
H=4mmH=4mm OT-Equator kit, internal hex. - See p. no.
i40-41SPNP
NPSP
$125
MK-NOE5MK-SOE5MK-WOE5
H=5mmH=5mmH=5mm
OT-Equator kit, internal hex. - See p. no. i40-41
WPSPNP
NPSPWP
$125
ET-IT001 - OT-Equator handling tools - See p. no. i40-41
$119
OE-IC002 - OT-Equator impression coping cap - See p. no.
i40-41
$35
OE-IC001 - OT-Equator impression transfer cap - See p. no.
i40-41
$35
MT-RDL30 L=23.5mm Long driver for 0.05 inch hex. Stainless steel See p. no. i40-41
$45
MT-RDS30 L=18.5mm Short driver for 0.05 inch hex. Stainless steel See p. no. i40-41
$45
OE-RCP01 - OT-Equator soft retentive cap (pink) - See p. no.
i40-41
$40
108.
Cat. No. Dimension Description Material Platform Additional info.
OT-Equator Kits
Cat. No. Dimension Description Material Platform Additional info.
OE-RCW01 - OT-Equator standard retentive cap (white) - See p. no.
i40-41
$40
OE-RCV01 - OT-Equator rigid retentive cap (violet) - See p. no.
i40-41
$40
OE-RCY01 - OT-Equator extra soft retentive cap (yellow) - See p. no.
i40-41
$40
OE-RCB01 - OT-Equator laboratory retentive cap (black) - See p. no.
i40-41
$40
OE-MH001 - OT-Equator metal housing - See p. no. i40-41
$65
4 Retention Cap Options
Extra Soft
Soft
Standard
High
109.
Ball Attachment System
Cat. No. Dimension Description Material Platform Additional info.
MB-N1375MW-B1500
H=1mmH=1mm
Ball attachment anchor, internal hex.
Titanium Nitridecoated Ti See p. no. i43WPSP
SPWP
$46
MB-N2330MB-N2375
H=2mmH=2mm
Ball attachment anchor, internal hex. See p. no. i43SPNP
NPSP
$46
MB-N3330MB-N3375MW-B3500
H=3mmH=3mmH=3mm
Ball attachment anchor, internal hex.
Titanium Nitridecoated Ti See p. no. i43WPSPNP
NPSPWP
$46
MB-N4330MB-N4375
H=4mmH=4mm
Ball attachment anchor, internal hex.
Titanium Nitridecoated Ti See p. no. i43SPNP
NPSP
$46
MB-N5375MW-B5500
H=5mmH=5mm
Ball attachment anchor, internal hex.
Titanium Nitridecoated Ti See p. no. i43WPSP
SPWP
$46
MB-AN152 H=2mm Ball anchor 15° angulated abutment, internal hex. Titanium See p. no. i43SP
SP
$120
Ball Attachment System
Overdenture
Gingival height 1,2,3,4,5mm
0.55mm
2.6mm
Ø2.25mm
H
110.
Cat. No. Dimension Description Material Platform Additional info.
Ball Attachment System
Cat. No. Dimension Description Material Platform Additional info.
MB-AN252 H=2mm Ball anchor 25° angulated abutment, internal hex. Titanium See p. no. i43SP
SP
$120
MB-RS375 L=15.1mm Ball attachment analog Stainless steel See p. no. i43
$20
MB-SF200 L=3.5mm Plastic ball cap Plastic See p. no. i43
$20
MB-GPS10 L=2.4mm Gold ball cap Gold-e See p. no. i43
$45
MB-TTP10 L=3.1mm Titanium ball cap Titanium See p. no. i43
$70
MB-PR010 Ø3.8mmL=2mm Plastic mounting sleeve Plastic See p. no. i43
$12
MB-TBS10 Ø2.50mm Titanium ball cap spring, standard Steel See p. no. i43
$60
MB-TBS20 Ø2.60mm Titanium ball cap spring, soft Steel See p. no. i43
$60
MB-DMH10 - Double metal housing - See p. no. i43
$42
MB-PPC10 L=2.6mm Standard plastic cap for metal housing Plastic See p. no. i43
$8
MB-PPR10 L=2.6mm Soft plastic cap for metal housing retention 800-950g Plastic See p. no. i43
$8
111.
Ball Attachment System
Cat. No. Dimension Description Material Platform Additional info.
MB-DB235 Ø15mmL=2.6mm Plastic disc for ball attachment Plastic See p. no. i43
$8
MT-NB225 L=22mm Ball attachment anchor key Stainless steel See p. no. i43
$50
MT-RB225 L=22mm Ball attachment anchor key Stainless steel See p. no. i43
$50
2
Soft Retention
Standard Retention
Plastic Caps Retention Options
112.
Cat. No. Dimension Description Material Platform Additional info.
Locator Attachment System
Cat. No. Dimension Description Material Platform Additional info.
MB-NZL00MB-SZL00MB-WZL00
H=0mmH=0mmH=0mm
Locator abutment Titanium Nitride coated Ti -WPSPNP
NPSPWP
$120
MB-NZL01MB-SZL01MB-WZL01
H=1mmH=1mmH=1mm
Locator abutment Titanium Nitride coated Ti -WPSPNP
NPSPWP
$120
MB-NZL02MB-SZL02MB-WZL02
H=2mmH=2mmH=2mm
Locator abutment Titanium Nitride coated Ti -WPSPNP
NPSPWP
$120
MB-NZL03MB-SZL03MB-WZL03
H=3mmH=3mmH=3mm
Locator abutment Titanium Nitride coated Ti -WPSPNP
NPSPWP
$120
MB-NZL04MB-SZL04MB-WZL04
H=4mmH=4mmH=4mm
Locator abutment Titanium Nitride coated Ti -WPSPNP
NPSPWP
$120
MB-NZL05MB-SZL05MB-WZL05
H=5mmH=5mmH=5mm
Locator abutment Titanium Nitride coated Ti -WPSPNP
NPSPWP
$120
Locator Attachment System
Overdenture
1.78mm
Gingival height 0-6mm
*Note: Locator selection should be based on gingival height
H
113.
Locator Attachment System
Cat. No. Dimension Description Material Platform Additional info.
MB-NZL06MB-SZL06MB-WZL06
H=6mmH=6mmH=6mm
Locator abutment Titanium Nitride coated Ti -WPSPNP
NPSPWP
$120
MM-LCT10 L=83mm Locator core tool Steel / Titanium Nitride coated Ti -
$82
MM-LMP02 L=1.80mm Locator male processing package (2 pack) Steel / Nylon -
$64
MM-LIC10 Ø4.70mmL=4.50mm
Locator impression coping(4 pack)
Aluminum polyethylene -
$69
MM-LFA40MM-LFA50
Ø4mm, L=10.40mmØ5mm, L=10.40mm Locator female analog (4 pack) Aluminum
polyethylene -WPSPNP
NPSPWP
$69
MM-LRM10 Ø4.70mmL=1.80mm
Locator replacement male clear(4 pack) Nylon -
$23
MM-LLR10 Ø4.70mmL=1.80mm
Locator light extended(4 pack) Nylon pink -
$23
MM-LEL10 Ø4.70mmL=1.80mm
Locator extra light retention(4 pack) Nylon blue -
$23
MM-LER10 Ø4.70mmL=1.80mm
Locator extended range(4 pack) Nylon green -
$23
MM-LELE1 Ø4.70mmL=1.80mm
Locator extra light extended(4 pack) Nylon red -
$23
MM-LPP10 Ø4.60mmL=15mm
Locator parallel post(4 pack)
Polyethylene black -
$20
114.
Cat. No. Dimension Description Material Platform Additional info.
Locator Attachment System
Cat. No. Dimension Description Material Platform Additional info.
MM-LBP10 Ø4.60mmL=1.80mm
Locator black processing(4 pack)
Polyethylene black -
$23
MM-RSD15 L=19mm Locator short torque wrench driver Stainless steel -
$47
MM-RSD20 L=24mm Locator long torque wrench driver Stainless steel -
$47
MM-LSD15 L=15mm Locator square drive torque wrench driver Stainless steel -
$47
MM-LSD21 L=21mm Locator square drive torque wrench driver Stainless steel -
$47
1.36-1.82 kg
2.27 kg
1.36 kg
0.68 kg
0.68 kg
5RetentionOptions
Ø4.70mm Ø4.70mm Ø4.70mm Ø4.70mm Ø4.70mm
115.
Bars
Cat. No. Dimension Description Material Platform Additional info.
MM-TRU10 L=50mmH=2.6mm Titanium rider Titanium -
$95
MM-GRU10 L=50mmH=2.75mm Gold rider Gold-e -
$95
MM-PBU10 L=80mmH=2.3mm Plastic bar Plastic -
$32
MM-GBU10 L=50mmH=2.3mm Gold bar Gold-e -
$105
Bars
Overdenture
116.
Cat. No. Dimension Description Material Platform Additional info.
Bars
Cat. No. Dimension Description Material Platform Additional info.
MM-TC100 L=3.5mmH=2.5mm Gold rider Gold-e -
$58
MM-PC100 Ø1.9mmL=85mm Plastic round bar Burnout plastic -
$15
MM-GB100 Ø1.9mmL=50mm Gold bar Gold-e -
$105
3MaterialOptions
TiTitanium PlasticGold
Au POM
117.
Toll Free 1-866-797-1333
Flexibility is a key feature of the MIS expanded 4BONETM product range. The name 4BONE represents an entire family of quality regenerative biomaterial solutions consisting of bovine, porcine and synthetic based products that offer solutions for a wide range of bone regeneration procedures.
REGENERATIVE SOLUTIONS
120.
Cat. No. Dimension Description Material Platform Additional info.
For more info see p. no. i44-45
4BONE™ BCH - Synthetic
Bone Substitute
Bone Grafting Materials
BS-4BS01 4BONE BCH syringe 0.5cc, granule size: 0.5-1mm
BS-4BS1S 4BONE BCH tube 1cc, granule size: 0.5-1mm
BS-4BS25 4BONE BCH tube 2.5cc, granule size: 1-2mm
4BONE BCH is a fully synthetic bone graft material made of HA (60%) and ß-TCP (40%). Its osteoconductive structure, featuring 70% interconnected macro-porosity and micro-porosity, promotes colonization of osteogenic cells and allows the diffusion of biological fluids. Combined with its optimized morphology. The 4BONE BCH resorption properties enable predictable treatment outcomes.
Call For Price: 1-866-797-1333
Cat. No. Dimension Description Material Platform Additional info.
121.
Cat. No. Dimension Description Material Platform Additional info.
For more info see p. no. i44-45
4BONE™ XBM - Anorganic Bovine
Bone Matrix
Bone Grafting Materials
4B-X2505 4BONE XBM vial 0.5cc, granule size: 0.25-1mm
4B-X2510 4BONE XBM vial 1.0cc, granule size: 0.25-1mm
4B-X2525 4BONE XBM vial 2.5cc, granule size: 0.25-1mm
4B-X2540 4BONE XBM vial 4.0cc, granule size: 0.25-1mm
4B-X1010 4BONE XBM vial 1.0cc, granule size: 1-2mm
4B-X1025 4BONE XBM vial 2.5cc, granule size: 1-2mm
4BONE XBM is an anorganic bovine bone mineral matrix for use in guided bone regeneration procedures and is recommended for use as a bone void filler or augmentation material in periodontal defects and dental implant procedures. 4BONE XBM is produced by the removal of all organic components from bovine bone, leaving the natural mineral component for use as an osteoconductive material to support bone regeneration.
Call For Price: 1-866-797-1333
122.
Cat. No. Dimension Description Material Platform Additional info.
For more info see p. no. i44-45
BONDBONE® - Bonding Graft Material
Bone Grafting Materials
BS-BB005 BONDBONE 0.5cc, 3 drivers
BS-BB010 BONDBONE 1cc, 3 drivers
BONDBONE is a novel synthetic bone graft material that can be used as an excellent binder or as a stand-alone graft. BONDBONE is composed of biphasic calcium sulfate, well-established and widely documented for its biocompatibility, osteoconductivity and bioresorbability. It is fast setting, with physical properties not affected by the presence of blood and saliva.
Call For Price: 1-866-797-1333
Cat. No. Dimension Description Material Platform Additional info.
123.
Cat. No. Dimension Description Material Platform Additional info.
4MATRIX - Bone Graft Cement
Bone Grafting Materials
BS-4MX10 4MATRIX Bone Graft Cement, 1cc
4MATRIX Bone Graft Cement is an innovative synthetic bone grafting product developed to simplify dental bone grafting procedures. Composed of pure biphasic calcium sulfate and hydroxyapatite and characterized by a predetermined setting time, strength, and resorption rate, 4MATRIX is the preferred augmentation product for a wide variety of dental bone grafting procedures.
Call For Price: 1-866-797-1333
124.
Cat. No. Dimension Description Material Platform Additional info.
For more info see p. no. i44-45
4BONE™ RCM - Resorbable
Collagen Membrane
Barrier Membranes
BR-C1525 4BONE RCM membrane 15x25mm
BR-C2030 4BONE RCM Membrane 20x30mm
BR-C3040 4BONE RCM Membrane 30x40mm
4BONE RCM is engineered from porcine collagen. Due to its biocompatibility and low immunogenicity, porcine collagen has been successfully used in medical and dental procedures. 4BONE RCM is easy to trim, shape and adapt to the osseous defect and provides prolonged protection to enable sufficient quantity of bone to regenerate.
Call For Price: 1-866-797-1333
Cat. No. Dimension Description Material Platform Additional info.
125.
Cat. No. Dimension Description Material Platform Additional info.
For more info see p. no. i44-45
4BONE™ RSB - Resorbable Collagen
Barrier Membrane
Barrier Membranes
4B-S1520 4BONE RSB membrane 15X20mm
4B-S2030 4BONE RSB membrane 20X30mm
4B-S3040 4BONE RSB membrane 30X40mm
4BONE RSB Resorbable Collagen Barrier Membrane, is a bioresorbable, cell occlusive membrane engineered from highly purified Type I bovine collagen. Due to its optimal initial rigidity and defined stability, 4BONE RSB prevents soft tissue ingrowth during healing in defects that lack bony wall support.
Call For Price: 1-866-797-1333
126.
Cat. No. Dimension Description Material Platform Additional info.
For more info see p. no. i44-45
4BONE™ RCB - Resorbable Conforming
Barrier Membrane
Barrier Membranes
4B-C1520 4BONE RCB membrane 15X20mm
4B-C2030 4BONE RCB membrane 20X30mm
4B-C3040 4BONE RCB membrane 30X40mm
4BONE RCB Conforming Barrier Membrane is engineered from highly purified Type I bovine collagen. It is a versatile resorbable barrier membrane. Upon hydration, the barrier membrane easily adapts and conforms to all surgical sites.
Call For Price: 1-866-797-1333
Cat. No. Dimension Description Material Platform Additional info.
127.
Cat. No. Dimension Description Material Platform Additional info.
For more info see p. no. i44-45
4BONE™ TAPE
Collagen Wound
Dressings
4B-T0010 4BONE TAPE Resorbable Collagen Tape
4BONE TAPE 10/box. Size: 2.5cm x 7.5cm, 1mm thick
4BONE TAPE is used following oral surgical procedures to aid in wound healing. The Tape is engineered from highly purified cross-linked Type I bovine collagen with an optimal structure and thickness to allow the absorption of both fluid and blood at the defect site.
Call For Price: 1-866-797-1333
128.
Cat. No. Dimension Description Material Platform Additional info.
For more info see p. no. i44-45
4BONE™ PLUG
Collagen Wound
Dressings
4B-P0010 4BONE PLUG Resorbable Collagen Plug
4BONE PLUG 10/box. Size: 1cm x 2cm
4BONE PLUG is used following oral surgical procedures to aid in wound healing. The plug is engineered from highly purified cross-linked Type I bovine collagen with an optimal structure and thickness to allow the absorption of both fluid and blood at the defect site.
Call For Price: 1-866-797-1333
BONE GRAFTING MATERIALS
COLLAGEN WOUND DRESSINGSBARRIER MEMBRANES
Toll Free 1-866-797-1333
MIS MCENTER facilities offer a wide range of quality digital dentistry services, assisting doctors worldwide to increase both efficiency and quality of treatments they can offer their patients.
The MSOFT program creates a highly accurate preliminary implant placement plan, taking into consideration all aspects of the patient anatomy. Flexible prosthetic-driven planning can be done either by the clinician, or through our worldwide network of MCENTERs.
The MGUIDE surgical template open wire-frame design allows an open field of view during surgery, where anesthesia and irrigation are accessible from all angles without removing the template. MGUIDE surgical kits simplify the implantology process by eliminating the need for traditional guidance keys. Specially designed sleeves and drills stop at the precisely planned position and depth, freeing-up hands and saving valuable time.
MLAB CAD/CAM technology provides customized abutments, crowns, bridges and bars, in a range of materials such as Zirconia, Temp, Chrome Cobalt and Titanium.
MCENTER DIGITAL DENTISTRY.
132.
MGUIDE Custom Surgical Template
Cat. No. Dimension Description Material Platform Additional info.
MGUIDE Custom Surgical Template
MGUIDE
MG-TMP20 MGUIDE individual surgical template for edentulous
MG-TMP10 MGUIDE individual surgical template
The guided surgical procedure is done using a highly accurate 3D printed template. The unique open wire-frame template design allows anesthesia and irrigation from all angles. In addition, raised flap surgery can more easily be performed.
Call For Price: 1-866-797-1333
132.
133.
Cat. No. Dimension Description Material Platform Additional info.
MGUIDE Set for SEVEN Implant
Procedure
Cat. No. Dimension Description Material Platform Additional info.
For more info see p. no. i46-49
MGUIDE Set for SEVEN Implant Procedure
MGUIDE
MG-K001
MG-K001 MGUIDE set for SEVEN implant
The MGUIDE Set for SEVEN implants is designed for use with the MGUIDE surgical templates. The vides enhanced accuracy and safety for a smoother implant placement procedure. Drills are designed with built-in stoppers to allow correct preparation to the planned depth and position and no drill guidance keys are required. The ergonomic drill layout provides an easy to follow preparatory guideline for either hard or soft bone conditions.
$2499
133.
134.
MGUIDE SEVEN Set
Cat. No. Dimension Description Material Placement Additional info.
MG-TP047 Ø4.7mmL=26mm MGUIDE tissue punch Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-TP055 Ø5.5mmL=26mm MGUIDE tissue punch Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-BM047 Ø4.7mmL=24.5mm MGUIDE bone mill Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-BM055 Ø5.5mmL=24.5mm MGUIDE bone mill Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D0624 Ø2.4mmL=6mm MGUIDE pilot drill Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D0824 Ø2.4mmL=8mm MGUIDE pilot drill Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MGUIDE SEVEN Set
MGUIDE
MG-K001
134.
135.
Cat. No. Dimension Description Material Placement Additional info.
MGUIDE SEVEN Set
Cat. No. Dimension Description Material Placement Additional info.
MG-D1024 Ø2.4mmL=10mm MGUIDE pilot drill Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1124 Ø2.4mmL=11.5mm MGUIDE pilot drill Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1324 Ø2.4mmL=13mm MGUIDE pilot drill Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D0633 Ø2.2-3.2mmL=6mm
MGUIDE conical drill for Ø3.30 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D0833 Ø2.2-3.2mmL=8mm
MGUIDE conical drill for Ø3.30 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1033 Ø2.2-3.2mmL=10mm
MGUIDE conical drill for Ø3.30 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1133 Ø2.2-3.2mmL=11.5mm
MGUIDE conical drill for Ø3.30 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1333 Ø2.2-3.2mmL=13mm
MGUIDE conical drill for Ø3.30 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D0637 Ø2.8-3.6mmL=6mm
MGUIDE conical drill for Ø3.75 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D0837 Ø2.8-3.6mmL=8mm
MGUIDE conical drill for Ø3.75 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1037 Ø2.8-3.6mmL=10mm
MGUIDE conical drill for Ø3.75 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
135.
136.
MGUIDE SEVEN Set
Cat. No. Dimension Description Material Placement Additional info.
MG-D1137 Ø2.8-3.6mmL=11.5mm
MGUIDE conical drill for Ø3.75 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1337 Ø2.8-3.6mmL=13mm
MGUIDE conical drill for Ø3.75 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D0642 Ø3.3-4.1mmL=6mm
MGUIDE conical drill for Ø4.20 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D0842 Ø3.3-4.1mmL=8mm
MGUIDE conical drill for Ø4.20 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1042 Ø3.3-4.1mmL=10mm
MGUIDE conical drill for Ø4.20 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1142 Ø3.3-4.1mmL=11.5mm
MGUIDE conical drill for Ø4.20 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1342 Ø3.3-4.1mmL=13mm
MGUIDE conical drill for Ø4.20 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D0650 Ø4.1-4.9mmL=6mm
MGUIDE conical drill for Ø5 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D0850 Ø4.1-4.9mmL=8mm
MGUIDE conical drill for Ø5 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1050 Ø4.1-4.9mmL=10mm
MGUIDE conical drill for Ø5 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-D1150 Ø4.1-4.9mmL=11.5mm
MGUIDE conical drill for Ø5 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
136.
137.
Cat. No. Dimension Description Material Placement Additional info.
MGUIDE SEVEN Set
Cat. No. Dimension Description Material Placement Additional info.
MG-D1350 Ø4.1-4.9mmL=13mm
MGUIDE conical drill for Ø5 implant Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-DLG55 Ø9.9mmL=55mm MGUIDE drill length gauge Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
MG-GRI01 Ø7mmL=29.7mm
MGUIDE direct ratchet insertion tool, internal hex. Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$60
MG-GRN01 Ø7mmL=29.7mm
MGUIDE direct ratchet insertion tool, internal hex., NP Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$60
MG-GMI10 L=28.9mm MGUIDE motor insertion tool, internal hex. Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MG-GRI10 Ø7mmL=24.5mm
MGUIDE ratchet insertion tool, internal hex. Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
MT-HHR13 L=28mm Hand driver for 0.05 inch hex. Stainless steel See p. no. i46-49
STANDALONE
INSIDEKIT
$60
MG-IE172 L=32.7mm MGUIDE insertion tool extractor, internal hex. Titanium See p. no.
i46-49 STANDALONE
INSIDEKIT
$50
MG-IE160 L=32.7mm MGUIDE insertion tool extractor, internal hex., NP Titanium See p. no.
i46-49 STANDALONE
INSIDEKIT
$50
MG-DFP20 Ø2mmL=35.3mm MGUIDE drill for fixation pin Stainless steel See p. no.
i46-49 STANDALONE
INSIDEKIT
$85
Call For Price: 1-866-797-1333
137.
138.
MGUIDE SEVEN Set
Cat. No. Dimension Description Material Placement Additional info.
MG-FP020 Ø2mmL=29mm MGUIDE fixation pin Titanium See p. no.
i46-49 STANDALONE
INSIDEKIT
$18
MG-TAS55 Ø5.5mmL=24mm
MGUIDE template anchoring screw Titanium See p. no.
i46-49 STANDALONE
INSIDEKIT
$18
MT-RI030 L=84mm Monoblock ratchet - See p. no. i46-49
STANDALONE
INSIDEKIT
$150
4Diameters
3.303.754.20
5
138.
139.
Cat. No. Dimension Description Material Placement Additional info.
MGUIDE Kit for SEVEN Implant Narrow Sleeve
Cat. No. Dimension Description Material Placement Additional info.
MG-N0624 Ø2.4mmL=6mm MGUIDE narrow pilot drill Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N0633 Ø2.2-3.2mmL=6mm
MGUIDE narrow conical drill for Ø3.30 implant Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N0637 Ø2.8-3.6mmL=6mm
MGUIDE narrow conical drill for Ø3.75 implant Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N0824 Ø2.4mmL=8mm MGUIDE narrow pilot drill Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N0833 Ø2.2-3.2mmL=8mm
MGUIDE narrow conical drill for Ø3.30 implant Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N0837 Ø2.8-3.6mmL=8mm
MGUIDE narrow conical drill for Ø3.75 implant Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MGUIDE Kit for SEVEN Implant Narrow Sleeve
MGUIDE
MG-K002
Pending regulatory approvals
*
Call For Price: 1-866-797-1333
139.
140.
MGUIDE Kit for SEVEN Implant Narrow Sleeve
Cat. No. Dimension Description Material Placement Additional info.
MG-N1024 Ø2.4mmL=10mm MGUIDE narrow pilot drill Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N1033 Ø2.2-3.2mmL=10mm
MGUIDE narrow conical drill for Ø3.30 implant Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N1037 Ø2.8-3.6mmL=10mm
MGUIDE narrow conical drill for Ø3.75 implant Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N1124 Ø2.4mmL=11.5mm MGUIDE narrow pilot drill Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N1133 Ø2.2-3.2mmL=11.5mm
MGUIDE narrow conical drill for Ø3.30 implant Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N1137 Ø2.8-3.6mmL=11.5mm
MGUIDE narrow conical drill for Ø3.75 implant Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N1324 Ø2.4mmL=13mm MGUIDE narrow pilot drill Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N1333 Ø2.2-3.2mmL=13mm
MGUIDE narrow conical drill for Ø3.30 implant Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-N1337 Ø2.8-3.6mmL=13mm
MGUIDE narrow conical drill for Ø3.75 implant Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-NBM40 Ø4mm MGUIDE narrow bone mill Stainless steel See p. no. i50-51
STANDALONE
INSIDEKIT
MG-NTP40 Ø4mmL=26mm MGUIDE narrow tissue punch Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
Call For Price: 1-866-797-1333
140.
141.
Cat. No. Dimension Description Material Placement Additional info.
MGUIDE Kit for SEVEN Implant Narrow Sleeve
Cat. No. Dimension Description Material Placement Additional info.
MG-NLG40 Ø4mm MGUIDE narrow drill length gauge Titanium See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-NMN10 Ø5mmL=30.4mm
MGUIDE narrow motor insertion tool, internal hex., NP Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-NMS10 Ø5mmL=28.9mm
MGUIDE narrow motor insertion tool, internal hex., SP Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-NRN01 Ø5.3mmL=29.5mm
MGUIDE narrow direct ratchet insertion tool, internal hex., NP Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-NRS01 Ø5.3mmL=24.7mm
MGUIDE narrow direct insertion tool, internal hex., SP Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-NRN10 Ø5.3mmL=25mm
MGUIDE narrow ratchet insertion tool, internal hex., NP Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-NRS10 Ø5.3mmL=24.5mm
MGUIDE narrow ratchet insertion tool, internal hex., SP Stainless steel See p. no.
i50-51 STANDALONE
INSIDEKIT
MG-NTAS0 Ø5.3mmL=24mm
MGUIDE narrow template anchoring screw Titanium See p. no.
i50-51 STANDALONE
INSIDEKIT
Call For Price: 1-866-797-1333
141.
142.
MGUIDE Kit for Universal Pilot Drills
Cat. No. Dimension Description Material Placement Additional info.
MG-PBM24 Ø2.40mmL=24.5mm
MGUIDE universal pilot bone mill Stainless Steel See p. no.
i52-53 STANDALONE
INSIDEKIT
MG-P0624 Ø2.40mmL=6mm MGUIDE universal pilot drill Stainless Steel See p. no.
i52-53 STANDALONE
INSIDEKIT
MG-P0824 Ø2.40mmL=8mm MGUIDE universal pilot drill Stainless Steel See p. no.
i52-53 STANDALONE
INSIDEKIT
MG-P1024 Ø2.40mmL=10mm MGUIDE universal pilot drill Stainless Steel See p. no.
i52-53 STANDALONE
INSIDEKIT
MG-P1124 Ø2.40mmL=11.5mm MGUIDE universal pilot drill Stainless Steel See p. no.
i52-53 STANDALONE
INSIDEKIT
MG-P1324 Ø2.40mmL=13mm MGUIDE universal pilot drill Stainless Steel See p. no.
i52-53 STANDALONE
INSIDEKIT
MGUIDE Kit for Universal Pilot Drills
MGUIDE
MG-K003
Not available in USA
142.
143.
Cat. No. Dimension Description Material Placement Additional info.
MGUIDE Kit for Universal Pilot Drills
Cat. No. Dimension Description Material Placement Additional info.
MG-FP020 Ø2mmL=29mm MGUIDE fixation pin Titanium See p. no.
i52-53 STANDALONE
INSIDEKIT
$18
MG-DFP20 Ø2mmL=35.3mm MGUIDE drill for fixation pin Stainless steel See p. no.
i52-53 STANDALONE
INSIDEKIT
MG-PTAS0 Ø5.30mmL=25mm
MGUIDE universal template anchoring screw, Ø2.40mm Titanium See p. no.
i52-53 STANDALONE
INSIDEKIT
MT-RI030 L=84mm Monoblock ratchet - See p. no. i52-53
STANDALONE
INSIDEKIT
$150
MT-RA480 - Ratchet to hex. adapter Stainless steel See p. no. i52-53
STANDALONE
$45
0mm
13mm
Pilot Drills
13mm11.5mm
10mm8mm
6mm
5
Not available in USA
143.
144.
CAD-CAM Ti-Base Single Tooth
Restoration
Cat. No. Dimension Description Material Platform Additional info.
MN-TB001MD-TB001MW-TB001
H=4mmH=4mmH=4mm
Ti-Base, anti-rotation, internal hex. Titanium -WPSPNP
NPSPWP
$79
MN-IN060MD-IN060
L=8.4mmL=8.6mm
Incisor esthetic Ti-Base, internal hex. Titanium -SPNP
NPSP
$79
MN-SP102MD-SP102MW-SP102
H=10mmH=10mmH=10mm
Scan post, internal hex. Titanium -WPSPNP
NPSPWP
$79
MU-SP102 H=10mm Scan post for Multi-Unit abutments Titanium -
$79
MN-S0160MD-S0220MD-S0220
L=7.6mmL=7.6mmL=7.6mm
Direct prosthetic screw, 30 Ncm Titanium -WPSPNP
NPSPWP
$20
GI-SCH11GI-SCH11GI-WCH11
- Burnout anti-rotation plastic cap for Ti-Base - -WPSPNP
NPSPWP
CAD-CAM Ti-Base Single
Tooth Restoration
MLAB
Call For Price: 1-866-797-1333
144.
145.
Cat. No. Dimension Description Material Platform Additional info.
CAD-CAM Ti-Base Multiple Unit
Restoration
Cat. No. Dimension Description Material Platform Additional info.
MN-TB002MD-TB002MW-TB002
H=4mmH=4mmH=4mm
Ti-Base, free rotation, internal hex. Titanium -WPSPNP
NPSPWP
$79
MN-SP102MD-SP102MW-SP102
H=10mmH=10mmH=10mm
Scan post, internal hex. Titanium -WPSPNP
NPSPWP
$79
MU-SP102 H=10mm Scan post for Multi-Unit abutments Titanium -
$79
MN-S0160MD-S0220MD-S0220
L=7.6mmL=7.6mmL=7.6mm
Direct prosthetic screw, 30 Ncm Titanium -WPSPNP
NPSPWP
$20
CAD-CAM Ti-Base Multiple Unit Restoration
MLAB
145.
146.
Scan Post Internal Hex. Kit
Cat. No. Dimension Description Material Platform Additional info.
MK-0056 - Scan post kit, internal hex. - See p. no. i54
$799
MN-SP102MD-SP102MW-SP102
H=10mmH=10mmH=10mm
Scan post, internal hex. Titanium See p. no. i54WPSPNP
NPSPWP
$79
MU-SP102 H=10mm Scan post for Multi-Unit abutments Titanium See p. no. i54
$79
Scan Post Internal Hex. Kit
MLAB
MK-0056
146.
147.
Cat. No. Dimension Description Material Platform Additional info.
Titanium Blanks
Cat. No. Dimension Description Material Platform Additional info.
MN-IB091MD-IB091MW-IB091
Ø9mmØ9mmØ9mm
Titanium Blank, anti-rotation, internal hex. Titanium See p. no. i55WPSPNP
NPSPWP
$57
MN-IB121MD-IB121MW-IB121
Ø12mmØ12mmØ12mm
Titanium Blank, anti-rotation, internal hex. Titanium See p. no. i55WPSPNP
NPSPWP
$57
Titanium Blanks
MLAB
147.
Toll Free 1-866-797-1333
For your convenience, the following section provides an added resource about products and processes that may require expanded explanations in the form of visuals, schematics, technical information or documentation.
ADDITIONAL INFORMATION.
For your convenience, the following section provides an addedresource about products and processes that may require expandedexplanations in the form of visuals, schematics, technical information or documentation.
ADDITIONAL INFORMATION.
MT-HLI10
MT-RKL21 MT-RKS15
MT-HSI10
MT-SRH20MT-LRH20
MT-NRH10
MT-RMR10
MC1-00330 MH-52330MH-53330MH-54330MH-55330MH-56330
2/3/4/5/6
Ø 4.3mm MH-N2330MH-N3330MH-N4330MH-N6330MH-N8330
2/3/4/6/8mm
Ø 4mm
3/4/5mm
Ø 6.5mm
MH-W3500MH-W4500MH-W5500
3/4/5mm
Ø 5mm
MC1-00470
MH-03375MH-04375MH-05375MH-06375
3/4/5/6mm
Ø 4mm MH-53375MH-54375MH-55375MH-56375
3/4/5/6mm
Ø 5.5mm MC1-00375
3/4/5/6mm
Ø 4.8mm MH-A3375MH-A4375MH-A5375MH-A6375
MH-W3630MH-W4630MH-W5630
All Platforms
Surgical tools
Narrow Platform
Standard Platform
Wide Platform
Implant cover screws and healing caps
Long insertion tool, internal hex.
UNO One-Piece implant long key
UNO One-Piece implant short key
Short insertion tool, internal hex.
Short insertion tool,internal hex.
Long insertion tool, internal hex.
Long ratchet adapter, internal hex., NP
Long direct hand and ratchet key
*Anodized for SEVEN (The note is relevant for all screws)
*Anodized for SEVEN (The note is relevant for all screws)
*Anodized for SEVEN (The note is relevant for all screws)
i2
Refer to p: 6-37
1
2
3
1 3
2
1
2
3
Insertion tool and hand key adapter
Insertion tool for motor
Insertion tool in ratchet adapter
i3
Refer to p: 6-37
The innovative MIS packaging system is designed for simple and easy use. All of our implant boxes feature distinctive colors, large typeface, clear data labels and a pull tab for quick opening. Boxes are a uniform shape and height, specifically designed to fit in clinic cabinets for easy accessibility and compact space-saving storage.
Packaging
Quick identification markings signify: implant diameter (top), implant length (middle) and implant platform (bottom).
Implant identification markings
Boxes are a uniform shape and height, specifically designed to fit in clinic cabinets for easy accessibility and compact space-saving storage.
Pull tab
Convenient pull tab facilitates easy, quick opening of the box during surgery.
i4
Refer to p: 6-37
Implant Label Colors:
Light Gray
Gray
Yellow
Red
Blue
Green
White
UNO One-Piece Ø3
UNO One-Piece Ø3.50
(Narrow) SEVEN, M4 Ø3.30
(Standard) SEVEN, M4 Ø3.75
(Standard) SEVEN, M4 Ø4.20
(Wide) SEVEN, M4 Ø5
(Wide) SEVEN, M4 Ø6
i5
Refer to p: 6-37
MIS MULTIFIX 18 and 20mm Implants
MIS MULTIFIXFixed Restoration for Atrophic Ridges
The system provides a comprehensive treatment plan of full-arch screw retained immediate restoration for edentulous patients.
Clinical SummaryMIS MULTIFIX procedure is performed by anterior straight placement of two implants and posterior tilted placement of two (long) implants. All four implants gain high stability from the denser bone at the anterior part of the jaw. The implants are immediately restored by Multi-Unit abutments, straight and 17o angulated, for optimal distribution of force and compensation of up to 30o angulation of the posterior implants, thanks to the unique insertion tool.
i6
Refer to p: 6-37
MK-0058
MIS MULTIFIX Drilling Set
for 18 and 20mm
MIS MULTIFIX Long Implants Drilling Set enables a full drilling procedure followed by placement of 18mm or 20mm Standard platform implants. Long implant placement is recommended for the posterior tilted implants when performing Fixed Restoration for Atrophic Ridges.
Kit Contents:MT-LBT24Long body try-in Ø2.40mm
MT-LBT28
MT-LBT32
MT-LBT38
Long body try-in Ø2.80mm
Long body try-in Ø3.20mm
Long body try-in Ø3.80mm
MT-ETD24Extra-long twist drill Ø2.4mm
MT-ETD32Extra-long twist drill Ø3.2mm
MT-ETD38Extra-long twist drill Ø3.8mm
MT-ETD28Extra-long twist drill Ø2.8mm
i7
Refer to p: 6-37
MK-0059
Kit Contents:MT-BP320Bone profiler Ø3.2mm, internal hex., NP
MT-BGP32Bone profiler guide pin Ø3.2mm, internal hex., NP
MT-BP460Bone profiler Ø4.6mm, internal hex., WP
MT-BGP46MT BGP46Bone profiler guide pin Ø4.6mm, internal hex., WP
MT-BP370Bone profiler Ø3.7mm, internal hex., SP
MT-BGP37Bone profiler guide pin Ø3.7mm, internal hex., SP
MIS MULTIFIX Bone Profiler Kit
Surgery may be followed by bone milling around the posterior tilted implants, for a uniform surface of the hard tissue, allowing an easy, an easy path of insertion and acuurate connection of the angulated Multi-Units. MIS Bone Profiler Kit provides a solution for all platforms.
i8
Refer to p: 6-37
D. E. F.
C.A. B.
MIS MULTIFIX Step-by-Step(Preparation of tilted implant site)
Connect the bone profiler to the hand-piece and place over the guided pin.
Prepare the osteotomy according to MIS drilling sequence. The posterior tilted long implants require the use of the long drilling set or the long final drill (for hard bone only), that supplied with each one of MIS implants.
Following the tilted implant placement, connect the bone profiler guided pin manually into the implant. A maximum torque of 10Ncm is recommended.
Perform milling of the bone surface sur-rounding the tilted implant. A maximum cutting speed of 200RPM is recommended.
Achieve an ultimate path of insertion for the angulated Multi-Unit abutment.
Connect the 17o Multi-Unit abutment to the tilted implant for immediate restoration.
i9
Refer to p: 6-37
MT-P2406
MT-P2416
MT-P2413
MT-P2411
MT-P2410
MT-P2408
Pilot Drills External Irrigation
6mm Depth
8mm Depth
10mm Depth
11.5mm Depth
13mm Depth
16mm Depth
i10
Refer to p: 38-58
MT-TDT32
MT-TDT40
MT-TDT45
MT-TDT50
MT-TDT28
6mm Depth
8mm Depth
10mm Depth
11.5mm Depth
13mm Depth
16mm Depth
SEVEN Twist Drills,External Irrigation
i11
Refer to p: 38-58
MT-TDN32
MT-TDN38
MT-TDN45
MT-TDN50
MT-TDN55
MT-TDN28
6mm Depth
8mm Depth
10mm Depth
11.5mm Depth
13mm Depth
16mm Depth
M4 Twist Drills,External Irrigation
i12
Refer to p: 38-58
MT-TDI32
MT-TDI38
MT-TDI40
MT-TDI28
MT-TDI45
MT-TDI50
MT-TDI55
SEVEN and M4 Short Twist Drills, External Irrigation
6mm Depth
8mm Depth
10mm Depth
11.5mm Depth
i13
Refer to p: 38-58
6mm
8mm
10mm
11.5mm
13mm
16mm
MT-TD320
MT-TD380
MT-TD400
MT-TD450
MT-TD500
MT-TD550
MT-TD280
SEVEN and M4 Twist Drills,
Internal Irrigation
Depth
Depth
Depth
Depth
Depth
Depth
i14
Refer to p: 38-58
Ratchets
MIS offers a line of uniquely designed ratchets, to simplify both prosthetic screw tightening and implant insertion, allowing an accurate and safe performance.MIS ratchets are high durability instruments with a unique mechanism that simplifies use and cleaning.
Controlled tightening torque of implant placement (30-75 Ncm). The recommended torque for implant placement is 35-60 Ncm.
The monoblock ratchet can be used for implant placement and tightening or loosening screws.
Controlled tightening torque of prosthetic screws (10-30Ncm).
MT-RI040
MT-RT070
MT-RI030
Torque Ratchet for prosthetic screws
Torque Ratchet for implant placement
Monoblock Ratchet
i15
Refer to p: 38-58
MK-EI48
3
4
5
6
7
8
20 21
22 27
26 28
29 31
30
34
9 10
14 15 16 17 18 19
11 12 13
1
2
{
23
{
24
25
32
33
SEVEN Advanced Surgical Kit
The innovative SEVEN Surgical Kit contains all the required tools for SEVEN implant placement procedures. The kit is designed to enhance simplicity and safety; featuring a novel ergonomic design that follows the surgical drilling sequence for a more efficient procedure. A set of length-based pilot drills include color-coded visual indicators for both implant diameters and restorative platforms.
i16
Refer to p: 59-86
MT-BTT24
14
MT-BTT28
15
MT-BTT32
16
MT-BTT40
17
MT-BTT45
18
MT-GDN33
20
21
MT-GDN50
22
MT-NRH10
23
MT-PP240
MT-TDT45
12
MT-TDT50
13
MT-BTT50
19
MT-SMD10
1
MT-TDN19
2
MT-TDT28
9
MT-TDT32
10
MT-TDT40
11
MT-P2406
3
MT-P2408
4
MT-P2410
5
MT-P2411
6
MT-P2413
7
MT-P2416
8
24
MD-PF375
25
MN-PF330
MT-HLI10
26
MT-HSI10
27
MT-RDL30
33
30
MT-DE001
MT-LM005
32
28
MT-LRH20
MT-SRH20
29
31
MT-RMR10
34
MT-RT070MT-RT070
SEVEN Surgical Kit (MK-EI48)
Contents:
Torque Ratchet for implant placement
Long hex. drive for 0.05”
Long motor adapter for 0.05” hex.
Long direct hand and ratchet key
Drill extender
Short insertion tool, internal hex.
Long insertion tool, internal hex.
Short insertion tool, internal hex.
Direct press fit for closed tray Narrow platform
Long insertion tool, internal hex.
Direct press fit for closed trayTwist drill Ø4.50mm external irrigation
Twist drill Ø5mm external irrigation
Body try-in Ø2.40mm
Body try-in Ø2.80mm
Body try-in Ø3.20mm
Body try-in Ø4mm
Body try-in Ø4.50mm
Body try-in Ø5mm
Countersink, Standard platform
Countersink, Wide platformTwist drill Ø2.80mm external irrigation
Pilot drill Ø2.40 height 16mm
Pilot drill with built-in stopper Ø2.40 height 11.5mm
Pilot drill with built-in stopper Ø2.40 height 13mm
Pilot drill with built-in stopper Ø2.40 height 8mm
Pilot drill with built-in stopper Ø2.40 height 10mm
Spade marking drill
Marking drill Ø1.90mm external irrigation
Pilot drill with built-in stopper Ø2.40 height 6mm
Long ratchet adapter, internal hex., Narrow platform
Parallel pin Ø2.40/Ø3mm
Twist drill Ø3.20mm external irrigation
Twist drill Ø4mm external irrigation
i17
Refer to p: 59-86
MK-0016
1
2
3
4
56
7
8
9
21 22
14 16
1311 15 17
1210
{18
19
20
M4 Advanced Surgical Kit
The M4 Surgical Kit contains the complete range of drills and tools required for a full implant placement procedure. The kit features a convenient tool layout and protective cover with an easy-opening mechanism for quicker access.
i18
Refer to p: 59-86
MT-SMD10
1
MT-TDN19
2
12
MT-LRH20
MT-SRH20
13
MT-RDL30
17
MT-LM005
16
MT-HSI10
11
MT-HLI10
10
MT-CSN33
19
MT-GDN33
20
MT-PP240
18
MT-DE001
14
MT-GDN50
21
22
MT-RI030
MT-P2416
3
MT-TDN32
5
MT-TDN28
4
MT-TDN38
6
MT-TDN45
7
MT-TDN50
8
MT-TDN55
9
15
MT-RMR10
M4 Surgical Kit (MK-0016)
Contents: Spade marking drill
Marking drill Ø1.90mm external irrigation
Pilot drill Ø2.40 height 16mm
Twist drill Ø3.2mm external irrigation
Twist drill Ø2.8mm external irrigation
Short insertion tool, internal hex.
Long insertion tool, internal hex.
Twist drill Ø3.8mm external irrigation
Twist drill Ø4.5mm external irrigation
Twist drill Ø5mm external irrigation
Twist drill Ø5.5mm external irrigation
Long insertion tool, internal hex.
Short insertion tool, internal hex.
Drill extender
Long hex. drive for 0.05” hex.
Long motor adapter for 0.05" hex.
Long direct hand and ratchet key
Countersink, Narrow platform
Parallel pin Ø2.40/3mm
Countersink, Standard platform
Countersink, Wide platform
Monoblock Ratchet
i19
Refer to p: 59-86
MK-0014
MT-CSN33
MT-GDN50
MT-TDN28
MT-TDN38
MT-TDN32
MT-TDN45
MT-TDN50
MT-TDN55
MT-GDN33
M4 Drilling Set
In order to Make It Simple, the innovative M4 implants Drilling Set was designed as an add-on to the SEVEN Surgical Kit. When the two sets are combined, the doctor has a full range of drills and tools necessary to complete both M4 and SEVEN implant placement procedures.
Kit Contents:
Countersink, Narrow platform
Countersink, Standard platform
Countersink, Wide platform
Twist drill Ø4.5mm external irrigation
Twist drill Ø5mm external irrigation
Twist drill Ø5.5mm external irrigation
Twist drill Ø2.8mm external irrigation
Twist drill Ø3.8mm external irrigation
Twist drill Ø3.2mm external irrigation
i20
Refer to p: 59-86
MK-BH26
MT-BC280
MT-BC320
MT-BC380
MT-BC450
Ø2.80mm
Ø3.20mm
Ø3.80mm
Ø4.50mm
Yeung Bone Harvest Kit
The Bone Harvest Kit enables simple and easy bone harvesting during surgery. The kit provides a revolutionary dual-action bone harvesting system while drilling; the harvested bone can be used elsewhere as needed. Drills can also be used as final drills.
Drill with a slight continuous pressure. While removing the drill, continue rotation to keep the bone inside the drill slots. Drills should not be used more than 30 times.
Recommended speed is between20-50 RPM without irrigation.
DrillColor-coded drill matches sleeve color.
Bone accumulates inside the drill slots during drilling.
Bone Harvest drills can be used as final drills while harvesting bone.
The Bone Harvest Kit can be used with MIS drill stoppers, to ensure a safe drilling procedure.
Kit Contents:Bone Harvest Kit includes:
Simple.
Easy.
Safe.
i21
Refer to p: 59-86
1
2
3
4
5
6
7
8
9
13
10
12
MK-0020
13mm 8mm10mm
13mm11
Bone Compression Kit
The Bone Compression Kit enhances primary stability in type 3 and type 4 bone. The gradual condensation process applied on the osteotomy walls prior to implant placement, results in increased bone density around the implant and thus, greater primary stability. In addition, the unique design of the compression screws allows for closed sinus augmentation procedures. The screws engage bone, applying an upwards vertical force to elevate the sinus floor, facilitating delivery of augmentation materials to the site.
i22
Refer to p: 59-86
13mm 8mm10mm
13mm
MT-HSI10
9
MT-HLI10
10
1
MO-CO160
2
MO-CO200
3
MO-CO240
4
MO-CO280
5
MO-CO300
6
MO-CO350
7
MO-CO400
MT-SRH20
12
11
MT-LRH20
MT-SMD10
8
13
MT-RI030
Bone Compression Kit (MK-0020)Contents:
Convex compression screw Ø1.8/2.9mm
Convex compression screw Ø2.3/3.3mm
Convex compression screw Ø2.7/3.7mm
Convex compression screw Ø3.1/4.5mm
Concave sinus screw Ø3mm
Concave sinus screw Ø3.5mm
Concave sinus screw Ø4mm
Spade marking drill
Short insertion tool, internal hex.
Long insertion tool, internal hex.
Long insertion tool, internal hex.
Short insertion tool, internal hex.
Monoblock Ratchet
Step-by-Step(Preparation of the implant site)
Marking with Spade Marking Drill Initial compression with Convex Compress Screw Ø1.8/2.9mm.
Gradual compression with Convex Compress Screw Ø2.3/3.3mm.
Insertion of the SEVEN implant MF7-13375. During insertion, the implant finalizes compression, providing higher initial stability.
i23
Refer to p: 59-86
MK-0036
1
89
2
65
3
6
4
10
7
UNO Implant Surgical Kit
UNO One-Piece implants are placed using specially designed tools thatfit the implant prosthetic part. The kit includes surgical drills, placement keys and a ratchet wrench.
i24
Refer to p: 59-86
MT-BTT20
5
6
MT-PP001
MT-SMD10
1
MT-TDN20
2
MT-UML21
7
MT-TDT30
4
MT-P2416
3
10
MT-RI030
MT-RKL21
9
MT-RKS15
8
A. B. C. D.
UNO One Piece Surgical Kit (MK-0036)
Contents:
Twist drill Ø3mm external irrigation
Spade marking drill
Pilot Drill external irrigation
Pilot drill Ø2.40 height 16mm
Body try-in Ø2mm
Parallel Pin Ø2.0/3.20mm L24mm
UNO One-Piece implant long motor adapter
UNO One-Piece implant long key
UNO One-Piece implant short key
Monoblock Ratchet
Step-by-Step(Implant taken out of vial)
i25
Refer to p: 59-86
MK-0039
22
1 2
43
5
8
7 9
10
12
13
14
16
15
1718
20
19
6
11
21
19
Prosthetic Tools Kit
Designed for simplicity, MIS Prosthetic Tools Kits contains instruments for restorative procedures using MIS prosthetic components, for a wide range of prosthetic methods: implant level, abutment level, single or multiple units, cemented or screw restorations retained and overdentures. Kits feature logical, easy-to-follow protocol flow, color-coding and special markings to assist in economizing time and effort for restorative procedures.
i26
Refer to p: 59-86
MM-RSD15 MT-UW002
MT-US002MM-RSD20
MT-RDL30
MT-RDS30
CT-UW001
MT-UN002
MT-MURL2 CT-US001
1 12
2 13
3 14
4 15
516
6
MT-MUR02
17
CT-UN001
MT-RE172
7 18
MM-LCT10
MT-RE160
8
ET-IT001
MT-LM005
9 20
MT-UHD10
21
MT-URA10
22
MT-RI040
10
MT-SM005
MT-RB225
11
Prosthetic ToolsKit (MK-0039)
Contents:
Long locator torque wrench driver
Short locator torque wrench driver
Long hex. drive 0.05”
Short hex. drive 0.05”
Angulated Multi-Unit key
Straight Multi-Unit long ratchet key
Short motor adapter for 0.05” hex.
Implant analog for universal hand driver, internal hex., WP
Long motor adapter for 0.05” hex.
Int. connection abutment extractor, NP
Int. connection abutment extractor
Ball attachment anchor key
Implant analog for universal hand driver, conical conn., WP
Implant analog for universal hand driver, conical conn., WP
Implant analog for universal hand driver, conical conn., NP
Implant analog for universal hand driver, internal hex., NP
Implant analog for universal hand driver, internal hex., SP
Universal hand driver
19
OT Equator insertion tools
Locator core tool
Ratchet for prosthetic screws
Universal hand driver ratchet head adapter
i27
Refer to p: 59-86
MK-BS001
SEVEN Standard Platform Drill Stoppers Kit
Following the use of MIS length-based pilot drills, the SEVEN Standard Platform Drill Stoppers Kit ensures drilling to the exact desired depth. The kit includes the most commonly used lengths: 8, 10, 11.5 and 13mm.
StoppersFour sleeves for each diameter in 8, 10, 11.5, and 13mm lengths, color-coded according to drills
BoxTray can be removed from the box for ease of use
Scale
Teflon OUT Insert
Teflon IN Insert
Kit Contents:
ØØ2.80 stoppers(for Ø3.75mm implants)
ØØ3.20 stoppers(for Ø4.20mm implants)
Easy.Color-coding for quick identification of the sleeve diameter.
Safe. Safe drilling to desired depth.
Clear. Clearly arranged depth sleeves for 13-8mm for two diameters: Ø2.8 and Ø3.2mm.
Quick, easy assembly.Simple.
i28
Refer to p: 59-86
MK-SDS06
MK-SDS08
MK-SDS10
MK-SDS11
MK-SDS13
8mm10mm
11.5mm
13mm
MK-SDS##
SEVEN Depth-Based
Drill Stopper Kits
Following the use of the MIS length-based pilot drills, the SEVEN Length-Based Drill Stoppers Kit enables safe and easy drilling to the exact desired depth. Five different Stopper Kits are available in lengths: 6, 8, 10, 11.5 and 13mm.
Box
Stoppers
Tray can be removed from the box for ease of use
Five sleeves 2.8, 3.2, 4, 4.5, and 5mm diameters, color-coded according to drills
Teflon IN Insert
Teflon OUT Insert
Scale
Desireddrilling depth
Easy.Color-coding for quick identification of sleeve diameter.
Safe. Safe drilling to desired depth.
Clear. Clearly arranged depth sleeves for Ø2.8mm - Ø5mm diameter drills.
Quick, easy assembly.Simple. For 6mm implants
For 8mm implants
For 10mm implants
For 11.5mm implants
For 13mm implants
i29
Refer to p: 59-86
MK-0011
Abrahami Drill Guide Kit
The Abrahami Drill Guide Kit has been designed to enable the dental surgeon to accurately locate and drill the osteotomies of two or more consecutive implants with optimal spacing, angulation and parallelism. In standard cases, the Abrahami Kit may be used as a simple alternative to a surgical guide. Although designed as a surgical tool, the Abrahami Drill Guide Kit can also be used as a planning tool.
Simple and logical
Stabilization
Ideal distance measurement from adjacent teeth
Variable distance options
Optimal parallelism
Screw
Spring
Ball
Location Pin
Before cleaning, the Location Pins must be separated as follows: screws, springs, balls and pins. Cleaning and drying the parts is essential in order to avoid erosion of the parts and to maintain efficient functioning of the system.
Location Pins Ø2mm
Short 10mm
Long 16mm
Location Pins Ø2.80mm
Short 10mm
Long 16mm
Extension Arms
6, 7, 8mm
9, 10, 11mm
12, 13, 14mm
Paralleling Pin 20mm
i30
Refer to p: 59-86
MK-DB01
MT-A4022
MT-B4018
MT-C3125MT-F2121
MT-K2023
Zircon Diamond Burr Set
The Zircon Diamond Burr Set consists of commonly used smooth diamond burrs, required for proper preparation of zircon abutments.
Kit Contents:
Diamond burr 2.20mm Diamond burr 2.50mmDiamond burr 2.10mm
Diamond burr 1.80mm Diamond burr 2.30mm
i31
Refer to p: 59-86
MK-0040
22
3
11
21
2
10
16
20
1
9
15
14
13
7
6
5
8
12
19
417
1823
Prosthetic Planning Kit
The MIS Prosthetic Planning Kit consists of replicas of the most commonly used MIS cement retained abutments. The kit allows doctors and technicians to evaluate different abutments and to select the best fitting size, diameter and shape on a case-by-case basis. The replicas can be used either directly in the patient’s mouth or on implant-level master models. The titanium superstructures are color-coded, in accordance with MIS platform colors: purple for Standard and green for Wide.
i32
Refer to p: 59-86
1
2
3
4
5
6
7
15
16
17
19
18
20
21
9
8
10
11
12
13
14
22
23
1. 2. 3.
MD-CPK81-1
MD-CPK82-2
MD-CPK83-3
MD-CPK84-4
MD-CTP10-5
MD-MAC10-6
MD-P0030-7
MD-AN151-9
MD-A0010-8
MD-AN251-10
MD-A1510-11
MD-A2510-12
MD-P1530-13
MD-P2530-14
MW-CPK81-15
MW-CPK82-16
MW-CPK83-17
MW-CTP10-19
MW-CPK84-18
MW-MAC10-20
MW-AN151-21
MW-P1510-22
MD-GT190
Prosthetic Planning Kit (MK-0040)Contents:
Colored 1mm transgingival abutment, h. 8mm, SP
Colored 2mm transgingival abutment, h. 8mm, SP
Colored 3mm transgingival abutment, h. 8mm, SP
Colored 4mm transgingival abutment, h. 8mm, SP
Colored Narrow profile cementing post
Colored Standard cementing post
Colored esthetic 3mm abutment, internal hex.
Colored 15o angulated abutment
Colored esthetic 1mm abutment, internal hex.
Colored 25o angulated abutment
Colored esthetic 15o 1mm angulated abutment internal, hex.
Colored esthetic 25o angulated 1mm abutment, internal hex.
Colored esthetic 15o angulated 3mm abutment, internal hex.
Colored esthetic 25o angulated 3mm abutment, internal hex.
Colored 1mm transgingival abutment, h. 8mm, WP
Colored 2mm transgingival abutment, h. 8mm ,WP
Colored 3mm transgingival abutment, h. 8mm, WP
Colored direct conical titanium post, WP
Colored 4mm transgingival abutment, h. 8mm, WP
Colored cementing post, WP
Colored 15o angulated abutment, WP
Colored Wide esthetic 15o 1mm angulated abutment, internal hex.
Guide pin for technician set
Abutment selection and restoration planning
i33
Refer to p: 59-86
MWH-M7559
MWH-CAL59
MWH2-STUB
MWH-M0131(230V)
MWH-M0132(115V)
MCU Control Unit
The MCU Control Unit is an intelligent drive unit for dental surgical applications, facilitating clean and simple operation. Exclusively designed and made by the W&H Group, the control unit is a highly practical, user-friendly and easily portable device. It offers a maintenance-free surgical micro-motor, advanced programming features, wide speed range, accurate torque control, user-friendly foot control, clearly visible display, integrated coolant pump and more. CE approved and FDA cleared for marketing, the MCU Control Unit is manufactured according to ISO: 9001 requirements and complies with the most stringent safety requirements for medical equipment.
MCU Accessories
Surgical contra-angle 20:1
Surgical contra-angle LED 20:1
Irrigation system 1/2 way
GreenPump ON / OFF
OrangeChange program
YellowChange motor direction
GrayStart motor
i34
Refer to p: 59-86
- Control Unit - Foot Pedal- Irrigation Support Rod- Rubber Motor Support- 3 Sterile Irrigation Tubes- Power Cord (2m)- MCU-MIS Control Unit User Manual- Micromotor and Cord Kit
The MIS MCU core kit comes with:
The motor features torque limitation for dental implantation (5-50 Ncm); wide speed range of 300-40,000 rpm; integrated coolant pump; maintenance-free.
The surgical micromotor features advanced functions such as: programing, working steps and low speed with high torque.
Exclusive design, highly practical and easily portable.
70 Ncm
Peformance is in line with modern clinical developments.
Outstanding simplicity. Clearly visible display panel and function buttons.
Complies with the most stringent safety requirements for medical equipment. The MIS-MCU is approved by CE, FDA and manufactured under ISO 9001:2008 regulations.
i35
Refer to p: 59-86
MK-PIC01
MK-PIC01
Prosthetic Introduction Case
Prosthetic Inroduction Case
i36
Refer to p: 59-86
Pcs: Pcs: Pcs: Pcs:
MD-CPK421
4 MA-SA171
1 MA-S1480
5 MA-S2480
1 MA-S3480
1 MA-S4480
2 MB-AN152
2 MB-N2375
4 MA-SA301 1 MD-A0010
1 MD-A1510
2 MD-CP013
1 MD-CPH13
1 MW-AN151-21
1 MD-MAC10
1
1
ME-G001A
ME-G002A
ME-G003A1
ME-G004A1
ME-G005A1
MK-00011
MK-00401
ME-G006A1
ME-G007A6
MU-CP04812
MK-CPK421
MM-PBU1012
MM-TRU101
MT-NB22510
Plastic cylinder for Multi-Unit
Complete prosthetic kit, H2, C4, internal hex., SP
Plastic bar-ovoid
Titanium rider-ovoid
Ball attachment key
Maxilla - ball attachment - angulated and straight abutments
Mandible - Dolderbar over Multi-Unit abutments
Mandible - angulated and straight Multi-Unit abutments, full arch
Abutment holding system kit
Prosthetic planning kit
Full maxilla
Full mandible
Esthetic 1mm abutment, internal hex., SP
Esthetic 15°, 1mm angulated abutment, internal hex., SP
Direct plastic cylinder without hex., SP
Direct plastic cylinder with hex., SP
Colored 15° angulated abutment, internal hex., WP
Standard cementing post, SP
Maxilla - bridge and crown screw retained and angulated abutments
Transgingival 2mm abutment h.4mm, internal hex., SP
Multi-Unit 17° angulated abutment, Internal hex., SP
Multi-Unit 1mm abutment, internal hex., SP
Multi-Unit 2mm abutment, internal hex., SP
Multi-Unit 1mm abutment, internal hex., SP
Multi-Unit 4mm abutment, internal hex., SP
Ball anchor 15° angulated 2mm abutment, internal hex., SP
Ball anchor 2mm abutment, internal hex., SP
Multi-Unit 30° angulated abutment, internal hex., SP
Kit Contents:
Mandible - CPK, MAC10 and Esthetic abutments
i37
Refer to p: 59-86
MD-A1510
7mm
1mm
8mm
Ø5.20mm
3.50
2.40
8mm
1mm
MD-A2510
7mm
Ø5.60mm
8mm7mm
MD-P2530
3mm
Ø5.60mm
3.50
2.40
3.30
3.30
MD-CTP10
8.5mm8.5
Ø3.75mm
MD-MAC10
11mm11
Ø4.75mm
MD-WMAC1
11mm
Ø5.50mm
MD-MACF1
11mm
Ø4.80mm
8mm
3mm
7mm
MD-P1530
Ø5.20mm
Ø5.60mm
8mm
1mm
7mm
Ø3.40mm
MD-A0010
8mm
3mm
7mm
MD-P0030
Ø5.60mm
Ø3.40mm
MD-AN151
1.5mm
7.5mm
Ø5.20mm
6.6mm
Ø2.80mm
Ø5.90mm
MD-AN251
1.6mm
6.9mm 6.1mm6
Ø3.30mm
2.40
2.80
Cemented Restoration Options
Esthetic abutments 0º
Angulated abutments 15ºEsthetic angulated abutments 15º
Angulated abutments 25ºEsthetic angulated abutments 25º
Standard abutments
i38
Refer to p: 93-101
MD-CPK61
1
1
3
52 4 6
MD-RSM60
2
MM-CHC60
3
MD-IC800
4
MD-IC040
5
MD-ICH40
6
MD-CPK81*MD-CPK82*MD-CPK83*MD-CPK84*
MD-CPK61*MD-CPK62*MD-CPK63*MD-CPK64*
MD-CPK41*MD-CPK42*MD-CPK43*MD-CPK44*
CPK - Complete Prosthetic Kit
The Complete Prosthetic Kit (CPK) is a comprehensive set designed for the full restoration of parallel inserted implants and restoration of a single implant case. The CPK includes all required components for the fabrication of cement retained restorations: an abutment, impression cap, comfort cap, casting sleeves and an analog.
Transgingival 1mm abutment, h.6mm, SP
Abutment analog, h.6mm, SP
Plastic healing cap, h.6mm, SP
Direct impression coping, h. 8mm, SP
Burnout plastic cap, SP
Burnout anti-rotation plastic cap, SP
Contents:
All CPK abutments can be purchased separately. They are provided with a burnout anti-rotation plastic cap (MD-ICH40).
Anatomic transgingival abutments, SP
C=8mm H=1,2,3,4mm
C=6mm H=1,2,3,4mm
C=4mm H=1,2,3,4mm
i39
Refer to p: 93-101
OE-RSM60
OE-IC001
OE-IC002
ET-IT001
MT-SRA10
MT-LM005
MT-SM005
OE-RCY01
OE-RCP01
OE-RCW01
OE-RCV01
OE-RCB01
OT-Equator
OT-Equator laboratory cap (black)
Metal housing
Laboratory Use:
OT-Equator cap (2.7kg)High retention (violet)
OT-Equator cap (1.8kg)Standard retention (white)
OT-Equator cap (1.2kg)Soft retention (pink)
Extra soft retention (yellow)
Metal housing
Clinical Use:
OT-Equator cap (0.6kg)
OT-Equator Tools
Long motor adapter for 0.05" hex.
Short motor adapter for 0.05" hex.
Square connection to ratchet adapter
OT-Equator analog
OT-Equator impression transfer cap
OT-Equator impression coping cap
OT-Equator handling tools
i40
Refer to p: 107-117
1.7mm2.6mm
Ø2.5mm
2mm
1.7mm
Ø2.5mm
4mm
1.7mm
Ø2.5mm
1mm
1.7mm
Ø2.5mm
3mm
1.7mm
Ø2.5mm
5mm
1.7mm
Ø2.5mm
5mm
1.7mm
3mm
Ø2.5mm
1.7mm
1mm
1.7mm
Ø2.5mm
Ø2.5mm
1mm
1.7mm 4mm
Ø2.5mm
1.7mm
5mm
Ø2.5mm
1.7mm
2mm
Ø2.5mm
1.7mm
3mm
Ø2.5mm
1.7mm
Narrow Platform
OT-Equator Abutments
Standard Platform
Wide Platform
Low Profile
Ball AttachmentOT-Equator
i41
Refer to p: 107-117
1-5mm
4.8mm
2mm
21°
17°
2.10mm
2.75mm 1mmH
^
^
^
^
75°
^
^
^
^
100°
^
^
^
^
40°
Multi-Unit System
Insertion Path:
17º Multi-Unit abutments can be used with implants with divergence of up to 75º.
30º Multi-Unit abutments can be used with implants with divergence of up to 100º.
Insertion Path:
Straight Multi-Unit abutments can be used with implants with divergence of up to 40º.
Solutions for extreme situations
Clinical Summary
Straight Multi-Unit Abutments. Simple and easy to use, straight Multi-Unit abutments provide screw-retained restorative solutions for every clinical scenario in which implants with a divergence of up to 40º are used. Designed to fit all MIS implant connection types for optimal fit between abutment seat and implant connection.
Angulated Multi-Unit Abutments.The perfect solution in cases where angulation correction is required, angulated Multi-Unit abutments are simple and easy to use.
Internal Hex. Connection
Internal Hex. Connection
i42
Refer to p: 102-106
MB-AN152
3mm
1.7mm
Ø4.6
MB AN152
m15°
1.7mm
Ø4.6
3.5mm25°
MB-AN252^
^
30°
15°^^ ^̂15°
^ ^
50°
25° 25°^^ ^̂
Angulated Ball Attachments
Solutions for extreme situations
Clinical Summary
Place the ball anchor angulated abutment (15°/25°) on the implant using the gripping bar. To screw the abutment to the implant, position the hand hex. driver (MT-HHR13 / MT-RDL30) through the gripping bar opening. Recommended tightening moment is 30 Ncm.
15º ball attachments canbe used with implants withdivergence of up to 30º.
25º ball attachments canbe used with implants withdivergence of up to 50º.
Ball Ø2.25 Ball Ø2.25
i43
Refer to p: 107-117
4BONETM RANGE PACKAGING
Optimal volumes and quality of hard and soft tissue are required to satisfy the goals of oral rehabilitation and implant dentistry. MIS offers a range of regenerative materials for dental use aimed at providing solutions for a wide variety of clinical needs. MIS regenerative products are available in varying volumes and sizes for simple and easy delivery directly to the surgical site. The selection of regenerative solutions offered by MIS allows clinicians to choose the precise products necessary to obtain the optimal surgical outcome.
i44
Refer to p: 120-123
i45
Refer to p: 120-123
1 3
2 4
6
7
8
9
10
15
20
25
21
22
23
24
16
17
18
19
11
12
13
14
5
26
27
28
29
30
MG-K001
MGUIDE Set for SEVEN Implant
Procedure
i46
Refer to p: 132-143
MG-D1033
12
MG-D1133
13
MG-D0833
11
MG-D1333
14
MG-D0624
5
MG-TP047
1
MG-BM047
33
MG-BM055
4
MG-TP055
2
MG-D0633
10
MG-D0824
6
MG-D1024
7
MG-D1124
8
MG-D1324
9
MG-D1337
19
MG-D0642
20
MG-D0637
15
MG-D0837
16
MG-D1037
17
MG-D1137
18
MG-D0842
21
MG-D1042
22
MG-D1142
23
MG-D1342
24
MG-D0650
25
MG-D0850
26
MG-D1050
27
MG-D1150
28
MG-D1350
29
30
MG-DLG55
Kit Contents:MGUIDE Drill Kit for SEVEN implant procedure
MGUIDE pilot drill Ø2.40 L6mm
MGUIDE tissue punch Ø4.7mm
MGUIDE bone mill Ø4.7mm
MGUIDE bone mill Ø5.5mm
MGUIDE tissue punch Ø5.5mm
MGUIDE pilot drill Ø2.40 L8mm
MGUIDE pilot drill Ø2.40 L10mm
MGUIDE pilot drill Ø2.40 L11.5mm
MGUIDE pilot drill Ø2.40 L13mm
MGUIDE conical drill for Ø3.30 implant L10mm
MGUIDE conical drill for Ø3.30 implant L11.5mm
MGUIDE conical drill for Ø3.30 implant L8mm
MGUIDE conical drill for Ø3.30 implant L13mm
MGUIDE conical drill for Ø3.30 implant L6mm
MGUIDE conical drill for Ø3.75 implant L13mm
MGUIDE conical drill for Ø4.20 implant L6mm
MGUIDE conical drill for Ø3.75 implant L6mm
MGUIDE conical drill for Ø3.75 implant L8mm
MGUIDE conical drill for Ø3.75 implant L10mm
MGUIDE conical drill for Ø3.75 implant L11.5mm
MGUIDE conical drill for Ø4.20 implant L8mm
MGUIDE conical drill for Ø4.20 implant L10mm
MGUIDE conical drill for Ø4.20 implant L11.5mm
MGUIDE conical drill for Ø4.20 implant L13mm
MGUIDE conical drill for Ø5 implant L6mm
MGUIDE conical drill for Ø5 implant L8mm
MGUIDE conical drill for Ø5 implant L10mm
MGUIDE conical drill for Ø5 implant L11.5mm
MGUIDE conical drill for Ø5 implant L13mm
MGUIDE drill length gauge Ø5.5mm
i47
Refer to p: 132-143
NP
NP
SPARE
MO
TOR INSERT. T
OO
L
DIR
ECT INSERT. T
OO
LS
EXTRACTORS
RATCHET INSERT. T
OO
L
HA
N
D SCREW DRIVE
R
34
FIXATION DRILL ø2
FIXATION & ANCHORING TOOLS
FIXATION PINS TEMPLATE ANCHORING SCREWS
INTERNAL HEXAGONTOOLS
9
1
5
6
4
{{
{10 11
2
3
87
MGUIDE Tool Kit for Internal Hex.
i48
Refer to p: 132-143
MG-FP020
10
MG-DFP20
9
MG-TAS55
11
MT-HHR13
5
MG-GRI10
4
MG-GRN01
2
MG-GRI01
1
MG-GMI10
3
MT-RI030
8
MG-IE172
6
MG-IE160
7
MG-TAS56
Kit Contents:MGUIDE tool kit for int. hex.
Long hand screwdriver for 0.05" hex.
MGUIDE direct ratchet insertion tool, internal hex.
MGUIDE direct ratchet insertion tool, internal hex., NP
MGUIDE motor insertion tool, internal hex.
MGUIDE ratchet insertion tool, internal hex.
Additional Tool:
MGUIDE flat template anchoring screw, Ø5.5mm
MGUIDE drill for fixation pin, Ø2 mm
Monoblock Ratchet MGUIDE fixation pin, Ø2mm
MGUIDE template anchoring screw, Ø5.5mm
MGUIDE insertion tool extractor, internal hex., NP
MGUIDE insertion tool extractor, internal hex.
i49
Refer to p: 132-143
MG-K002
{ { {24
1
2
3
4
8
9
10
11
12
13
14
15
16
17
18
20 21
22
25
23
19
5
6
7
MGUIDE Kit for SEVEN Implant, Narrow Sleeve
The MGUIDE Kit for SEVEN Implant, Narrow Sleeve, is designed to offer an ideal solution for clinical situations that require the use of Narrow implants, such as narrow spaces between anterior teeth or cases of smaller jaws. The kit contains all drills and tools required to place Ø3.30 and Ø3.75mm implants only.
i50
Refer to p: 132-143
MG-NRN10
20
MG-NRS10
21
MG-NMN10
22
MG-NMS10
23
MG-NTAS0
24
MG-NLG40
25
MG-N1333
12
MG-NTAS1
MG-NRS01
19
MG-N0637
13
MG-N1133
11
MG-N0837
14
MG-N1037
15
MG-N1137
16
MG-N1337G 33
17
MG-NRN01
18
MG-N1024
5
MG-NTP40
1
MG-N0624
3
MG-N0824
4
MG-NBM40
2
MG-N1033
10
MG-N1124
6
MG-N1324
7
MG-N0633
8
MG-N0833
9
Kit Contents:MGUIDE SEVEN for Narrow Sleeve
Additional Tool:
MGUIDE narrow flat template anchoring screw Ø4mm
MGUIDE Narrow conical drill for Ø3.30 implant L13mm
MGUIDE Narrow conical drill for Ø3.30 implant L11.50mm
MGUIDE Narrow conical drill for Ø3.30 implant L10mm
MGUIDE Narrow pilot drill Ø2.40 L13mm
MGUIDE Narrow conical drill for Ø3.30 implant L6mm
MGUIDE Narrow conical drill for Ø3.30 implant L8mm
MGUIDE Narrow pilot drill Ø2.40 L10mm
MGUIDE Narrow tissue punch Ø4mm
MGUIDE Narrow pilot drill Ø2.40 L6mm
MGUIDE Narrow pilot drill Ø2.40 L8mm
MGUIDE Narrow bone mill Ø4mm
MGUIDE Narrow pilot drill Ø2.40 L11.50mm
MGUIDE Narrow conical drill for Ø3.75 implant L6mm
MGUIDE Narrow conical drill for Ø3.75 implant L8mm
MGUIDE Narrow conical drill for Ø3.75 implant L10mm
MGUIDE Narrow conical drill for Ø3.75 implant L11.50mm
MGUIDE Narrow conical drill for Ø3.75 implant L13mm
MGUIDE Narrow direct ratchet insertion tool, internal hex., NP
MGUIDE Narrow direct ratchet insertion tool, internal hex., SP
MGUIDE Narrow ratchet insertion tool, internal hex., NP
MGUIDE Narrow ratchet insertion tool, internal hex., SP
MGUIDE Narrow motor insertion tool, internal hex., NP
MGUIDE Narrow motor insertion tool, internal hex., SP
MGUIDE Narrow template anchoring screw Ø4mm
MGUIDE Narrow drill length gauge Ø4mm
i51
Refer to p: 132-143
160.
91
2 6
7 { {3 4 5
8
10
MG-K003
MGUIDE Kit for Universal Pilot Drills
The Universal Surgical Kit for guided implant procedures is suitable for all MIS implant models. The kit is used for first-stage implantation procedures: Ø2.4mm pilot drills in a range of lengths and both horizontal and vertical fixation pins.
i52
Refer to p: 132-143
MG-P1124
5
MG-P1024
4
MG-P0824
MG-P0624
MG-PBM24
1
2
3
6
MG-P1324
9
MG-FP020
MG-PTAS0
8
MG-DFP20
10
7
MT-RI030
Kit Contents:MGUIDE Kit for Universal Pilot Drills
Universal pilot drill Ø2.40 L10mm
Universal pilot drill Ø2.40 L8mm
Universal pilot drill Ø2.40 L6mm
Universal pilot bone mill Ø2.40mm Universal pilot drill Ø2.40 L11.50mm
Universal pilot drill Ø2.40 L13mm
Fixation pin Ø.2mm
Drill for fixation pin Ø.2mm
Universal template anchoring screw Ø2.40mm
Monoblock Ratchet
The surgical kit can be fully sterilized using pre-vacuum autoclave at 134°C (273°F) for 6 minutes. After mechanical or clinical cleaning, all surgical instruments must be sterilized in an autoclave at 134°C (273°F) for 6 minutes. Do not exceed 134°C. Never use dry sterilizers.
i53
Refer to p: 132-143
MK-0056
The Scan Posts, with patent pending design features, offer superior surface quality, allowing easy scanning and unique geometry with well-defined flat surfaces for easy placement and optimum accuracy. No spraying or pre-scanning needed. Suitable for both Intra Oral and desktop scanning.
Lingual Buccal
MN-SP102 MD-SP102MW-SP102 MU-SP102
Kit Contents:
Scan post, internal hex., NP Scan post, internal hex., SPScan post, internal hex., WP Scan post for Multi-Unit
Scan Post Internal Hex. Kit
i54
Refer to p: 144-147
MN-IB091MD-IB091MW-IB091
MN-MAB10MD-MAB10MW-MAB10
MN-IB121MD-IB121MW-IB121
Titanium Blanks
The Titanium Blanks with a pre-milled interface are available for internal hex. and conical conn. implants, for all platforms. Each interface is available in two diameters - 9mm and 12mm.
Compatible analogs* are required for the Titanium Blanks
*Titanium Blanks must be ordered with the analog.
Ø9mm Titanium Blanks are intended for a shorter milling time
Ø12mm Titanium Blanks are intended to fit to most customized designs
Titanium Blank Ø9mm, anti-rotation, internal hex., NPTitanium Blank Ø9mm, anti-rotation, internal hex., SPTitanium Blank Ø9mm, anti-rotation, internal hex., WP
Milling analog for Titanium Blank, internal hex., NPMilling analog for Titanium Blank, internal hex., SPMilling analog for Titanium Blank, internal hex., WP
Titanium Blank Ø12mm, anti-rotation, internal. hex., NPTitanium Blank Ø12mm, anti-rotation, internal hex., SPTitanium Blank Ø12mm, anti-rotation, internal hex., WP
Titanium Blanks Analogs
i55
Refer to p: 144-147
160.
0.08
0.013
5.5-6.5
Alloy Composition
Gold-eMaterialTitanium Alloy Ti 6Al 4V ELI Gold-a Gold-s
Application C, K L, G, K L, G, K L, K
Composition
Hardness
Balance
Balance
Balance
Legend: C–bonding K–resin L–soldering G–casting onto
Soft annealing HV5
Hardened HV5
Soft Co / min
Melting range Co
V
AI
H (max)
N (max)
O (max)
Fe (max)
C (max)
Ti (max)
Ir %
Zn %
Cu %
Pd %
Ag %
Pt %
Au %
Hardened Co / min
i56
161.
MD-P1530MD-P2530
MD-MAC10MD-WMAC1
MD-MACF1MD-A0010MD-P0030
MD-CPK41MD-CPK42MD-CPK43MD-CPK44MD-CPK61MD-CPK62
MD-CPK63MD-CPK64MD-CPK81MD-CPK82MD-CPK83MD-CPK84
MD-A1510MD-A2510
MD-CTP10 MD-AN151MD-AN251
MD-GPC10MD-GP010
Restorative Components
Guidelines for usage ofMIS Restorative Components
Location Anterior MaxillaAnterior Mandible Canine, Premolars and Molars
Premolars and Molars
Crown/ Implant
Inclination Ratio
Gingival Height
Catalog Number
Abutment description
Esthetic angulated abutment
Standard post abutment
Friction fit post with platform switching
Esthetic abutment
Transgingival abutmentEsthetic angulated abutment
Conical post abutment
Angulated abutment
Screw-retained gold-plastic/CC abutment
Adjustable, based on abutment preparation
According to gingival height available in heights of 1,2,3,4mm
Up to 2mm buccalUp to 4mm lingual
Up to 2mm
Up to 4° 15° or 25° 15° or 25°
Up to 4mm buccal Up to 6mm palatal
Adjustable, based on abutment preparation
Up to 2mm buccal Up to 6mm lingual/palatal
Adjustable, based on abutment preparation
Up to 2.5° Up to 3.5° 15° or 25°
Up to 2mm buccal Up to 4mm palatal
*Recommendation only
i57
162.
Tube cap is marked with a distinctive color-coded label that indicates the diameter, length and platform of the implant.
Diameter and Platform
Color-Coding
Color codes:
Narrow platform
Standard platform
Wide platform
Implant platform(Standard/Wide/Narrow/
and One-Piece)
Implant diameter (mm)
Implant length (mm)
i58
163.
Label Description
Naming and labeling explanations
Date of manufactureUse-by date
Lot no.Qty.
Catalog no.
Barcode
Type of implant & connection
CE mark
Type of implant & connection
Catalog number
Lot no.
Use-by date
Date of manufacture
Implant diameter & length
Three labels are included between the inner and outer tubes. Labels specify product catalog number, lot number and use-by date.
i59
Only
Manufacturer
Sterilized using gamma irradiation
Catalog number
Sale by or on the order of a licensed dentist
Non-sterile
Attention, see instructions for useSingle use
European conformity mark
Do not use if package is damaged
Do Not Resterilize
Use-by date
Upper limit of temp.
Temp. limitation
Batch code
Date of manufacture
i60
20%
90%
80%
50%
MIS ManualsSymbol Index
i61
INDEX.
Cat. No. Page Additional Info Page Cat. No. Page Additional Info Page
4B4B-C1520 126 i44-454B-C2030 126 i44-454B-C3040 126 i44-454B-P0010 128 i44-454B-S1520 125 i44-454B-S2030 125 i44-454B-S3040 125 i44-454B-T0010 127 i44-454B-X1010 121 i44-454B-X1025 121 i44-454B-X2505 121 i44-454B-X2510 121 i44-454B-X2525 121 i44-454B-X2540 121 i44-45
BRBR-C1525 124 i44-45BR-C2030 124 i44-45BR-C3040 124 i44-45
BSBS-4BS01 120 i44-45BS-4BS1S 120 i44-45BS-4BS25 120 i44-45BS-4MX10 123 BS-BB005 122 i44-45BS-BB010 122 i44-45
CTCT-UN001 80 i26-27CT-US001 80 i26-27CT-UW001 80 i26-27
ETET-IT001 58/80/108 i40-41
GIGI-SCH11 144 GI-WCH11 144
MAMA-N1480 104 i42MA-N2480 104 i42MA-N3480 104 i42MA-N4480 104 i42MA-S1480 104 i42MA-S2480 104 i42MA-S3480 104 i42MA-S4480 104 i42MA-S5480 104 i42MA-SA171 104 i42MA-SA301 105 i42MA-W1480 104 i42MA-W3480 104 i42MA-W5480 104 i42
Cat. No. Page Additional Info Page Cat. No. Page Additional Info Page
MBMB-AN152 110 i43MB-AN252 111 i43MB-DB235 112 i43MB-DMH10 111 i43MB-GPS10 111 i43MB-N1375 110 i43MB-N2375 110 i43MB-N3375 110 i43MB-N4375 110 i43MB-N5375 110 i43MB-NZL00 113 MB-NZL01 113 MB-NZL02 113 MB-NZL03 113 MB-NZL04 113 MB-NZL05 113 MB-NZL06 114 MB-PPC10 111 i43MB-PPR10 111 i43MB-PR010 111 i43MB-RS375 111 i43MB-SF200 111 i43MB-SZL00 113 MB-SZL01 113 MB-SZL02 113 MB-SZL03 113 MB-SZL04 113 MB-SZL05 113 MB-SZL06 114 MB-TBS10 111 i43MB-TBS20 111 i43MB-TTP10 111 i43MB-WZL00 113 MB-WZL01 113 MB-WZL02 113 MB-WZL03 113 MB-WZL04 113 MB-WZL05 113 MB-WZL06 114
MDMD-A0010 93 i38MD-A1510 93 i38MD-A2510 94 i38
MD-AN151 93 i38MD-AN251 94 i38MD-CC010 103 MD-CCI10 103 MD-CP013 102 MD-CP050 102 MD-CPH13 102 MD-CPH50 102 MD-CPK41 98 i39MD-CPK42 98 i39MD-CPK43 98 i39MD-CPK44 98 i39MD-CPK61 98 i39MD-CPK62 99 i39MD-CPK63 99 i39MD-CPK64 99 i39MD-CPK81 99 i39MD-CPK82 99 i39MD-CPK83 99 i39MD-CPK84 99 i39MD-CTP10 95 MD-G0213 90 MD-G0220 94/96/103 i38MD-GP010 102 MD-GP100 90 MD-GPC10 102 MD-I0375 90 MD-IB091 147 i55MD-IB121 147 i55MD-IN060 144 MD-IT100 90 MD-IT300 90 MD-MAC10 95 MD-MACF1 95 MD-P0030 93 i38MD-P1530 93 i38MD-P2530 94 i38MD-PF375 62/91 i16-17MD-RSM10 91 MD-S0200 94/95/103 i38MD-S0220 94/95/103/144/145 i38MD-S0222 94/96/103 i38MD-S0224 94/96/103 i38MD-SP102 144/145/146 i54MD-TB001 144 MD-TB002 145 MD-TC013 92 MD-TCH13 92 MD-TPA10 92 MD-TPA12 92 MD-TPH50 92 MD-WMAC1 95
Cat. No. Page Additional Info Page Cat. No. Page Additional Info Page
MFMF4-06420 27 i2-5MF4-06500 29 i2-5MF4-06600 31 i2-5MF4-08375 25 i2-5MF4-08420 27 i2-5MF4-08500 29 i2-5MF4-08600 31 i2-5MF4-10330 23 i2-5MF4-10375 25 i2-5MF4-10420 27 i2-5MF4-10500 29 i2-5MF4-10600 31 i2-5MF4-11330 23 i2-5MF4-11375 25 i2-5MF4-11420 27 i2-5MF4-11500 29 i2-5MF4-11600 31 i2-5MF4-13330 23 i2-5MF4-13375 25 i2-5MF4-13420 27 i2-5MF4-13500 29 i2-5MF4-13600 31 i2-5MF4-16330 23 i2-5MF4-16375 25 i2-5MF4-16420 27 i2-5MF4-16500 29 i2-5MF7-06420 11 i2-5MF7-06500 13 i2-5MF7-06600 15 i2-5MF7-08375 9 i2-5MF7-08420 11 i2-5MF7-08500 13 i2-5MF7-08600 15 i2-5MF7-10330 7 i2-5MF7-10375 9 i2-5MF7-10420 11 i2-5MF7-10500 13 i2-5MF7-10600 15 i2-5MF7-11330 7 i2-5MF7-11375 9 i2-5MF7-11420 11 i2-5MF7-11500 13 i2-5MF7-11600 15 i2-5MF7-13330 7 i2-5MF7-13375 9 i2-5MF7-13420 11 i2-5MF7-13500 13 i2-5MF7-13600 15 i2-5MF7-16330 7 i2-5MF7-16375 9 i2-5MF7-16420 11 i2-5MF7-16500 13 i2-5
MF7-18375 17 i6MF7-18420 17 i6MF7-20375 17 i6MF7-20420 17 i6
MGMG2-06160 37 MG2-08160 37 MG2-10160 37 MG2-12160 37 MG-BM047 134 i46-49MG-BM055 134 i46-49MG-D0624 134 i46-49MG-D0633 135 i46-49MG-D0637 135 i46-49MG-D0642 136 i46-49MG-D0650 136 i46-49MG-D0824 134 i46-49MG-D0833 135 i46-49MG-D0837 135 i46-49MG-D0842 136 i46-49MG-D0850 136 i46-49MG-D1024 135 i46-49MG-D1033 135 i46-49MG-D1037 135 i46-49MG-D1042 136 i46-49MG-D1050 136 i46-49MG-D1124 135 i46-49MG-D1133 135 i46-49MG-D1137 136 i46-49MG-D1142 136 i46-49MG-D1150 136 i46-49MG-D1324 135 i46-49MG-D1333 135 i46-49MG-D1337 136 i46-49MG-D1342 136 i46-49MG-D1350 137 i46-49MG-DFP20 137/143 i52-53MG-DLG55 137 i46-49MG-FP020 138/143 i52-53MG-GMI10 137 i46-49MG-GRI01 137 i46-49MG-GRI10 137 i46-49MG-GRN01 137 i46-49MG-IE160 137 i46-49MG-IE172 137 i46-49MG-K001 133/134 i46-49MG-N0624 139 i50-51MG-N0633 139 i50-51MG-N0637 139 i50-51MG-N0824 139 i50-51MG-N0833 139 i50-51
Cat. No. Page Additional Info Page Cat. No. Page Additional Info Page
MG-N0837 139 i50-51MG-N1024 140 i50-51MG-N1033 140 i50-51MG-N1037 140 i50-51MG-N1124 140 i50-51MG-N1133 140 i50-51MG-N1137 140 i50-51MG-N1324 140 i50-51MG-N1333 140 i50-51MG-N1337 140 i50-51MG-NBM40 140 i50-51MG-NLG40 141 i50-51MG-NMN10 141 i50-51MG-NMS10 141 i50-51MG-NRN01 141 i50-51MG-NRN10 141 i50-51MG-NRS01 141 i50-51MG-NRS10 141 i50-51MG-NTAS0 141 i50-51MG-NTP40 140 i50-51MG-P0624 142 i52-53MG-P0824 142 i52-53MG-P1024 142 i52-53MG-P1124 142 i52-53MG-P1324 142 i52-53MG-PBM24 142 i52-53MG-PTAS0 143 i52-53MG-TAS55 138 i46-49MG-TMP10 132 MG-TMP20 132 MG-TP047 134 i46-49MG-TP055 134 i46-49
MKMK-0056 146 i54MK-CPK41 97 i39MK-CPK42 97 i39MK-CPK43 97 i39MK-CPK44 97 i39MK-CPK61 97 i39MK-CPK62 97 i39MK-CPK63 98 i39MK-CPK64 98 i39MK-CPK81 98 i39MK-CPK82 98 i39MK-CPK83 98 i39MK-CPK84 98 i39MK-DB01 84 i31MK-NIC6 100 MK-NIZ6 100 MK-NPK41 97 i39MK-NPK42 97 i39
MK-NPK43 97 i39MK-NPK44 97 i39MK-NPK61 97 i39MK-NPK62 97 i39MK-NPK63 98 i39MK-NPK64 98 i39MK-SDS06 71 i29MK-SDS08 71 i29MK-SDS10 71 i29MK-SDS11 71 i29MK-SDS13 71 i29MK-SIC6 100 MK-SIZ6 100 MK-SOE1 108 i40-41MK-SOE2 108 i40-41MK-SOE3 108 i40-41MK-SOE4 108 i40-41MK-SOE5 108 i40-41MK-SPC4 101 MK-SPZ4 101 MK-WPC4 101 MK-WPK41 97 i39MK-WPK42 97 i39MK-WPK43 97 i39MK-WPK44 97 i39MK-WPK61 97 i39MK-WPK62 97 i39MK-WPK63 98 i39MK-WPK64 98 i39MK-WPK81 98 i39MK-WPK82 98 i39MK-WPK83 98 i39MK-WPK84 98 i39MK-WPZ4 101
MMMM-GB100 117 MM-GBU10 116 MM-GRU10 116 MM-LBP10 115 MM-LCT10 57/78/114 i26-27MM-LEL10 114 MM-LELE1 114 MM-LER10 114 MM-LFA40 114 MM-LIC10 114 MM-LLR10 114 MM-LMP02 114 MM-LPP10 114 MM-LRM10 114 MM-LSD15 115 MM-LSD21 115
Cat. No. Page Additional Info Page Cat. No. Page Additional Info Page
MM-PBU10 116 MM-PC100 117 MM-RSD15 57/79/115 i26-27MM-RSD20 57/79/115 i26-27MM-TC100 117 MM-TRU10 116
MNMN-AN020 93 i38MN-CP013 102 MN-CPH13 102 MN-G0160 90 MN-GP010 102 MN-GP100 90 MN-GPC10 102 MN-I0330 90 MN-IN060 144 MN-IT100 90 MN-IT300 90 MN-PF330 62/91 i16-17MN-RSM10 91 MN-S0160 94/95/103/144/145 i38MN-SP102 144/145/146 i54MN-TC013 92 MN-TCH13 92 MN-TPA10 92 MN-TPA12 92
MOMO1-10300 33 i2-5MO1-10350 35 i2-5MO1-11300 33 i2-5MO1-11350 35 i2-5MO1-13300 33 i2-5MO1-13350 35 i2-5MO1-16300 33 i2-5MO1-16350 35 i2-5MO-CO160 72 i22-23MO-CO200 72 i22-23MO-CO240 72 i22-23MO-CO280 72 i22-23MO-SO300 72 i22-23MO-SO350 72 i22-23
MO-SO400 73 i22-23
MTMT-00400 49 MT-00500 49 MT-00600 49 MT-A4022 84 i31MT-AL005 55 MT-B4018 84 i31MT-BC280 77 i21MT-BC320 77 i21MT-BC380 77 i21MT-BC450 77 i21MT-BGP32 20 i8-9MT-BGP37 20 i8-9MT-BGP46 20 i8-9MT-BP320 20 i8-9MT-BP370 20 i8-9MT-BP460 20 i8-9MT-BTT20 68 i24-25MT-BTT24 60 i16-17MT-BTT28 60 i16-17MT-BTT32 60 i16-17MT-BTT40 60 i16-17MT-BTT45 61 i16-17MT-BTT50 61 i16-17MT-C3125 84 i31MT-CRD20 48 MT-CRD21 48 MT-CRD28 48 MT-CS450 57 MT-CSN33 47/64/67 i20MT-DE001 53/61/64 i18-19MT-DI001 53 MT-ETD24 18 i7MT-ETD28 18 i7MT-ETD32 18 i7MT-ETD38 18 i7MT-F2121 84 i31MT-GDM01 57 MT-GDN33 47/61/64/67 i20MT-GDN50 47/61/64/67 i20MT-HDL30 52/56 MT-HDS30 52/56 MT-HHR07 56 MT-HHR13 56/137 i46-49MT-HKL21 54 MT-HKO21 54 MT-HKS15 54 MT-HLI10 51/61/64/73 i22-23MT-HMR05 53 MT-HMR10 53
Cat. No. Page Additional Info Page Cat. No. Page Additional Info Page
MT-HSI10 51/61/64/73 i22-23MT-HTS10 57 MT-HW001 53 MT-IE160 56 MT-IE172 56 MT-IT100 55 MT-K2023 84 i31MT-LBT24 18 i7MT-LBT28 19 i7MT-LBT32 19 i7MT-LBT38 19 i7MT-LCD20 37 MT-LM005 52/55/61/64/79 i26-27MT-LRH20 51/61/65/73 i22-23MT-MRH10 51 MT-MRH20 51 MT-MSD20 37/56/79 i26-27MT-MUML2 106 i42MT-MUMS2 106 i42MT-MUR02 52/58/78/106 i42MT-MURL2 58/78/106 i42MT-MURS2 106 i42MT-NB225 55/112 i43MT-NMK02 106 i42MT-NRH10 52/62 i16-17MT-NRH20 52 MT-P2406 38/59 i16-17MT-P2408 38/59 i16-17MT-P2410 38/59 i16-17MT-P2411 39/59 i16-17MT-P2413 39/60 i16-17MT-P2416 39/60/63/68 i24-25MT-PD440 46 MT-PP001 53/69 i24-25MT-PP240 61/64 i18-19MT-RA480 54/143 i52-53MT-RB225 52/57/78/112 i43MT-RDE30 57 MT-RDL30 52/57/62/65/78/108 i40-41MT-RDM30 57 MT-RDS30 52/57/78/108 i40-41MT-RE160 58/79 i26-27MT-RE172 58/79 i26-27MT-RI030 50/65/69/73/138/143 i52-53MT-RI040 50/58/80 i26-27MT-RKL21 53/69 i24-25MT-RKS15 53/69 i24-25MT-RMR05 52 MT-RMR10 53/62/65 i18-19MT-RT070 50/54/61 i16-17MT-SCD20 37 MT-SM005 52/55/79 i26-27MT-SMD10 46/59/63/68/73 i24-25MT-SRA10 53 MT-SRH20 51/62/65/73 i22-23MT-TD110 46 MT-TD280 44 i14MT-TD320 44 i14MT-TD380 44 i14MT-TD400 44 i14
MT-TD450 45 i14MT-TD500 45 i14MT-TD550 45 i14MT-TDI28 42 i13MT-TDI32 42 i13MT-TDI38 42 i13MT-TDI40 42 i13MT-TDI45 43 i13MT-TDI50 43 i13MT-TDI55 43 i13MT-TDN19 46/59/63 i18-19MT-TDN20 38/68 i24-25MT-TDN28 41/63/66 i20MT-TDN32 41/63/66 i20MT-TDN38 41/63/66 i20MT-TDN45 41/64/66 i20MT-TDN50 41/64/66 i20MT-TDN55 41/64/66 i20MT-TDO01 37 MT-TDT28 40/60 i16-17MT-TDT30 68 i24-25MT-TDT32 40/60 i16-17MT-TDT40 40/60 i16-17MT-TDT45 40/60 i16-17MT-TDT50 40/60 i16-17MT-TP500 53 MT-TSD10 55 MT-UML21 54/68 i24-25MT-UMS21 54 MT-UN002 56/79 i26-27MT-URA10 56/79 i26-27MT-US002 56/79 i26-27MT-UW002 56/79 i26-27
MUMU-BGC48 105 i42MU-CC480 106 i42MU-CP048 105 i42MU-G0220 106 i42MU-H4480 105 i42MU-I0480 105 i42MU-IT480 105 i42MU-MG480 105 i42MU-RSM48 105 i42MU-S0220 105 i42MU-SP102 105/144/145/146 i54MU-T0480 105 i42
Cat. No. Page Additional Info Page Cat. No. Page Additional Info Page
MWMW-AN151 93 i38MWH-2STUB 86 i34-35MWH-CAL59 86 i34-35MWH-M0131 86 i34-35MWH-M0132 86 i34-35MWH-M7559 86 i34-35MWH-MMOTR 86 i34-35MW-I0470 90 MW-IT100 90 MW-IT300 90 MW-P0010 93 i38MW-P1510 93 i38MW-PF550 91 MW-RSM10 91 MW-SP102 144/145/146 i54MW-TC013 92 MW-TCH13 92 MW-TPA10 92 MW-TPA12 92 MW-TPH50 92 MW-WMAC1 95
OEOE-IC001 108 i40-41OE-IC002 108 i40-41OE-MH001 109 i40-41OE-RCB01 109 i40-41OE-RCP01 108 i40-41OE-RCV01 109 i40-41OE-RCW01 109 i40-41
MIS Implants Technologies Inc.18-00 Fair Lawn Ave.Fair Lawn,NJ,07410Phone: (201) 797-9144Fax: (201) 797-9145Toll Free: 1-866-797-1333
Customer Name
Customer #
Name Shipping Information
Billing Information
Shipping Method (Check One)
Payment Method
Street Address/Suite #
City, State and Zip Code
Name
Street Address/Suite #(If different than Credit Card Billing information, enter
credit card billing info)
City, State and Zip Code
Phone
Priority Overnight
Saturday
Credit Card
Credit Card Type
Exp. Date Name On Card
Card No. Sec. Code
COD Bill Me (Need credit card information to hold in file)
2day Ground
Standard Overnight Overnight Saver
Fax
Phone
Order Placed By New Customer
Packaging Slip
Date of Order
®
Catalog Number
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Quantity Description Lot # Price
Total (not including shipping)
Customer Order Form
TERMS AND CONDITIONS OF SALEThe following are the terms and conditions under which MIS Inc. sells its products in North America.
Governing terms
Delivery
Payment
Warranty
Education: modificationof products
Return policy
Exchange policy
Licenses, permits andexport control
Force majeure oract of god
Limitation of liability
Validity
General provisions
Caution
Prices
Taxes
Any shipment of products shall be deemed to be on the terms and conditions stated herein. Any and all terms and conditions submitted by Purchaser are hereby rejected. These terms cannot be varied by any oral promises, statements or representations.
The prices set forth herein do not include any sales, use, excise, ad valorem, property or other taxes applicable to the sale, use or delivery of the products, all of which shall be paid by Purchaser separately or added to the contract price and paid by Purchaser to MIS.
The prices set forth for the products are in United States dollars. Prices may be modified without prior notice.
Products sold hereunder shall by delivered F.O.B. manufacturer’s plant or distributor’s plant, as applicable. Purchaser shall assume responsibility for all subsequent delivery or shipping charges.
Payment terms shall be as set forth under the “Terms” section on front of invoice.
MIS exercises great care and effort in maintaining the superior quality of its products. MIS makes no warranty, express or implied, except that all MIS products shall be free from defects in material and workmanship. This warranty applies only to the original Purchaser and is nontransferable. In event of a product defect, immediately notify MIS of the defect and prior to returning the product. Devices must be sterilized prior to return. As its sole obligation under this warranty, MIS will, at its option, deny liability resulting from the improper use of these products, whether used separately or in combination with other products.
Only appropriate healthcare professionals should use these products. MIS strongly recommends completion of formal postgraduate implant education and strict adherence to the procedures described in MIS’s implant instruction manuals. MIS continually strives to improve its products and therefore reserves the right to improve, modify or discontinue products at any time, or to change specifications of the products without notice and without incurring any obligation.
Purchaser may return any MIS products within 60 days of the invoice date. MIS products returned within 30 days of the invoice date will be accepted without a restocking fee to the Purchaser. MIS products returned between 31 and 60 days of the invoice date will be subject to a restocking fee. An MIS product will be accepted for return only if the MIS product is (1) returned in its original, unopened package (including autoclavable products); (2) received by MIS within 60 days after the invoice date for that product; and (3) returned freight prepaid accompanied by the MIS return authorization number provided by MIS’s Customer Service Department. Purchaser should be advised that MIS products not meeting the above criteria will not be accepted for return.
MIS products may be exchanged within 180 days of the invoice date, without a restocking fee, for other MIS products of equal or lesser value within the same product family as determined by MIS (example, implant for implant, abutment for abutment). MIS products may be exchanged within 180 days of the invoice date for other MIS products of greater value within the same product family as determined by MIS (example, implant for implant, abutment for abutment), with the price differential paid by the Purchaser, provided that the exchanged MIS products is (1) returned in its original, unopened package (including autoclavable products); (2) a currently offered MIS products (discontinued products not included): and (3) returned freight prepaid and accompanied by the MIS return authorization number provided by MIS’s Customer Service Department.
The timely securing of permits, licenses or other local, state or federal government approvals required in connection with Purchaser’s use of any products hereunder shall be the sole responsibility of Purchaser and Purchaser shall bear the cost thereof. Unless otherwise agreed between MIS and Purchaser, products sold hereunder are for use only in the North America. Purchaser agrees that Purchaser will comply fully with all applicable state and federal laws and regulations and Purchaser shall indemnify MIS for all losses, damages and penalties incurred as a result of any violation of applicable state or federal law or regulations.
MIS shall not be liable for any loss or damage due for failure or delay arising out of any cause beyond the control of MIS. No such failure or delay shall be the basis for an increase in MIS’s obligation or any termination by Purchaser.
Except for the warranty expressly described in the “warranty” paragraph above, neither MIS nor any of its affiliates makes any other warranty with respect to the MIS products, express or implied, written or oral, including, without limitation, any implied warranty of merchantability, or a warranty of fitness for a particular purpose. MIS shall not be liable for business interruption, loss of profits, special, indirect, incidental or consequential damages of any nature and from any cause whether based in contract, tort (including negligence) or other legal theory, even if MIS has been advised of the possibility of such damages.
If any provision of these Terms and Conditions is found to be illegal or unenforceable in any respect, such illegality or unenforceability shall not affect any other provision of these Terms and Conditions, all of which shall remain enforceable in accordance with their terms.
The purchase of the products and these Terms and Conditions are governed by the laws of the state of New Jersey exclusive of its conflicts of law principles. This document incorporates all oral and written representations between the parties and constitutes the entire agreement and understanding of the parties with respect to the subject matter hereof and supercedes any and all other agreements either oral or written between the parties with respect to such subject matter. No amendment or modification may be made to this document unless in writing and duly executed by an authorized representative of MIS. Purchaser consents to jurisdiction and venue in the Superior Court of New Jersey for Bergen County and waives the right to trial by jury.
Federal (U.S.) law restricts these devices to sale by or on the order of a licensed healthcare practitioner. Devices labeled “STERILE” are certified to be sterile unless package is opened or damaged.
Customer Service
Monday – Friday, 8:30 – 8:00 Eastern Time
Toll Free 1-(866) 797 1333
© MIS Corporation. All rights reserved. MIS are trademarks or registered trademarks of MIS Corporation
© MIS Corporation. All rights reserved. * Additional information may be added to the product descriptions without prior notice.
Established in 1995,
MIS Implants Technologies Ltd. is a global
leader in the development and production of advanced
products and innovative solutions aimed to simplify dental
implantology. Through our state-of-the-art production facilities, MIS
offers a comprehensive range of high quality dental implants,
superstructures, tools and kits, as well as extensive
solutions for oral restoration and health.
⑯
MAKE IT S I M P LE
Internal HexagonProduct Catalog, 2016
Internal Hexagon Product C
atalog, 2016
MC-CIU06 Rev.13
MIS Implants Technologies Inc.18-00 Fair Lawn Ave. Fair Lawn, NJ,07410
Phone: (201) 797-9144 Fax: (201) 797-9145Toll Free: 1-866-797-1333
Email: [email protected]
Top Related