TUL - Transport- and Storage Systemfor Tools
2
Tool Carriers Made of Plastic -Basic Element of the TUL System.
The tool carrier measures 240 x 120 x130 mm and has 2, 3 or 5 locations forholding tools with a tapered or cylindri-cal shank. The plastic used is shock-proof and resistant to all substanceswhich are usually present such as oils,fats, petrol.
Versatile:
The tool carrier is used individuallyto store and transport few tools.A hole with countersinking enables itto be fastened to a base.
By assembling several tool carrierslinked together, a higher storagecapacity can be achieved. A grooveand tongue prevent lateral displace-ment. Only the first and the last toolcarrier has to be fixed to the tableor tool cabinet.
The tool carriers can be suspendedonto aluminium profile rails for attach-ment on walls, racks, tall cabinets andtransport trolleys. Aluminium profilerails and tool carriers are ideal forbuilding customized storage andtransport units.
The tool carriers can be inserted onall trolleys and racks with bars at theside for carrying tools vertically.
TUL carrier with holding diskfor cutting toolsFor the transport and storage ofcutting tools. The disk is rotatableand indicates whether the cuttingtool can be used or whether it isworn out.Ref.no. on request.
Colour pins Colour Ref.no.
1 packet incl.50 pieces
RedGreen
127.047127.048
Tool carriers with colourmarkingColoured pins for clear indication of thetool’s status. Colour coding shows at aglance the new tools for the machineand used tools for resetting.
Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
Weightkg
Ref. no.Number oflocations
SizeUse for
HSK tapersHSK A - ISO 12164-1**
ISO tapersDIN 2080 / ISO 297DIN 69 871JIS B 6339 (MAS 403 BT)ANSI B 5.50
Morse tapers DIN 228
Cylindrical shanks(Adjustable adapters)DIN 6327
Cylindrical shanks(Lathes)
ABS-KometABS-N
Capto TM - System
KM / UTS - System
Modular precision spindleinserts
Universal carrierto be used as tray or with theboard supplied for small tools(drilling stencil included)
0.90.90.70.70.80.81.41.4
0.81.10.80.80.81.4
1.00.90.9
1.01.00.90.91.10.90.8
0.90.90.90.8
0.70.70.7
1.00.90.91.01.0
0.90.90.90.81.0
2.2
127.025127.026127.027127.028127.029127.030
on requeston request
127.091127.018127.011127.015127.001127.073*
127.009127.007127.014
127.010127.009127.008127.007127.012127.014127.002
127.007127.014127.002127.099
127.069127.070127.071
127.009127.008127.057127.058127.059
127.060127.061127.062127.063127.064
127.100*
127.016*
55332211
333221
553
5555333
5332
333
55332
55332
2
0
HSK 32HSK 40HSK 50HSK 63HSK 80HSK 100HSK 125HSK 160
ISO 30ISO 35ISO 40ISO 45ISO 50ISO 60
240x240x130 mm
Morse 3Morse 4Morse 5
Tr 16 (ø 17.3)Tr 20 (ø 21.4)Tr 25 (ø 27.2)Tr 28 (ø 30.3)Tr. 36 (ø 38.6)Tr 40 (ø 41.3)Tr 48 (ø52.0)
16, ø 3020, ø 4025, ø 5032, ø 60
ABS 40 (ø 20)ABS 50 (ø 28)ABS 63 (ø 34)
C 3C 4C 5C 6C 8
KM 32KM 40KM 50KM 63KM 80
240x240x130 mm
240x240x130 mm
3
Tool Carriers
Size RetainerRef.no.
HSK 32 127.122HSK 40 127.123HSK 50 127.124HSK 63 127.125HSK 80 127.126HSK 100 127.127
**Spares for HSK
* Importantinformation:When held up onaluminium profilerails the applicationpossibilities are limi-ted due to the doublesize. Please requestadditional informationif required.
Number of Alocations
2 1203 705 51
Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
4
TULMOBIL System 1 (RAL 2004)
Model OS1(former model FM)
Model OS2(former model TF)
Model OS3(former model BZ)
CapacityTo accommodate 8 tool carriers atan angle on aluminium profile rails.In the top and bottom steel frame afurther 8 carriers or small storageboards or trays can be inserted.
Standard specificationWith 2 swivel castors (one withlocking device), 2 fixed castors, pushhandle and 4 aluminium profile rails.
l x w x h = 770 x 500 x 960 mmLoading capacity 300 kpWeight 37.0 kg
CapacityTo accommodate 32 tool carriers atan angle on aluminium profile rails.The profile frame available as anaccessory provides additional depositspace.
Standard specificationWith 2 swivel castors (one withlocking device), 2 fixed castors, pushhandle and 8 aluminium profile rails.
l x w x h = 975 x 900 x 1015 mmLoading capacity 600 kpWeight 70.0 kg
CapacityTo accommodate 16 tool carriers atan angle on aluminium profile rails.Two further carriers can be insertedin the front steel frame and anotherseven in the back. The top profileframe available as an accessoryprovides additional deposit space.
Standard specificationWith 2 swivel castors (one withlocking device), 2 fixed castors, pushhandle and 4 aluminium profile rails.
l x w x h = 975 x 700 x 1015 mmLoading capacity 600 kpWeight 60.0 kg
Ref.no. 129.011 Ref.no. 129.020 Ref.no. 129.021
Tyres: Without tread, grey solid rubber Tyres: Without tread, grey solid rubber Tyres: Without tread, grey solid rubber
Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
5
TULMOBIL - Accessories and Spare Parts Drawing bag made of sheet metal
To be attached on the front side,for DIN A4 horizontal format.Weight: 2.1 kg
Profile frame
To be screwed on, suitable for8 tool carriers or a deposit boardor a combination of tool carriers,deposit trays and deposit boards. Weight: 3.9 kg
Ref.no. 130.014
Ref.no. 130.020
Protective frame
For TULMOBIL OS3
Can be folded up (can be retrofitted).Weight: 11.0 kg
Ref.no. 130.023
Swivel castors with locking device
Standard specification:Tyres: Without thread, grey solid rubberRims: Made of pressed sheet steel, with roller bearing, zink-plated.
For TULMOBIL OS1For TULMOBIL OS1 and OH3
Standard specification:
For TULMOBIL OS2 and OS3
Standard specification:
Standard specification:
Ref.no. 130.001
Design: As described above, without stemFor TULMOBIL OS2 / OS3 (ø 160 mm)
Ref.no. 130.003
Simple swivel castors
Standard specification:Tyres: Without thread, grey solid rubberRims: Made of pressed sheet steel,with roller bearing, zink-plated.
For TULMOBIL OS1
Ref.no. 130.002
Design: As described above, without stemFor TULMOBIL OS2 / OS3 (ø 160 mm)
Ref.no. 130.004
Fixed castors with plate fitting
For TULMOBIL OS2 / OS3 (ø 160 mm)
Ref.no. 130.005
Standard specification:Tyres: Without thread, grey solid rubberRims: Made of pressed sheet steelwith steel tube hub, with roller or ball bearing,
For TULMOBIL OS1 (ø 140 mm)
Ref.no. 130.007
Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
zink-plated.
Robust constructionVariable assembly optionsVersatile applicationFunctional and manoeuvrableLow investment costs
6
VariTUL - The New Mobilityin the Production Area
Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
Aesthetically pleasing
Customisable Transportation Solutions
High level trolleys with adjustable insert frame positions and interlockpush handles for ergonomic working.
Our well-proven TUL carriers can also be inserted for safe transportation of tools.
Document pocket Deposit panel Utensils box
The basic trolley frameworkconsists of two side elements,two insert frames and a pushhandle that are quickly interlockedto form a robust structure.The practical design allows thetrolley to be arranged to suit yourspecific transportation task. WithVariTUL you can now createyour own trolley. There are severalpossibilities for combining theindividual elements for the transportation of your work pieces or tools, measuring equipment or fixtures, auxiliaries or any other goods. Practical accessory additions can be attached to the side elements to enhance the versatility of the trolley. There arevariable height options throughadjustable platform levels toprovide a comfortable workingposture. VariTUL - will enhanceany production area.
VariTUL - Variable solutionsfor flexible transport andstorage
7Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
VariTUL - Modular and Easy to Interlock
Model VTH5 Model VTH7Side element withswivel castor and locking castor
w x h = 520 x 880 mm
Ref.no. 130.501
Side element withfixed castors
w x h = 520 x 880 mm
Ref.no. 130.502
Push handleColour: RAL 3020 traffic red
l x w x h = 500 x 90 x 100 mm
Ref.no. 130.520
Insert frame l x w x h = 670 x 500 x 65 mm(for 10 TUL carriers)
Ref.no. 130.510
l x w x h = 910 x 500 x 65 mm(for 14 TUL carriers)
Ref.no. 130.511
Complete set Set 1:1 side element with swivel castor and locking castor1 side element with fixed castors2 insert frames 1 push handle
l x w x h = 780 x 520 x 900 mmLoading capacity 250 kpWeight 23 kg
Ref.no. 129.510
Set 2:1 side element with swivel castor and locking castor1 side element with fixed castors2 insert frames 1 push handle
l x w x h = 1010 x 520 x 900 mmLoading capacity 250 kpWeight 34 kg
Ref.no. 129.511
Side element withswivel castor andlocking castor forhigh level trolleys
w x h = 520 x 1800 mm
Ref.no. 130.505
Side element withfixed castors forhigh level trolleys
w x h = 520 x 1800 mm
Ref.no. 130.506
Colour: RAL 7011 iron grey
8Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
Aufl
with Many Useful Details
Model VTH5 Model VTH7
Insertable shelf l x w x h = 620 x 240 x 15 mm
Ref.no. 130.530
l x w x h = 860 x 240 x 15 mm
Ref.no. 130.531
Insertable shelfwith punched-out
l x w x h = 620 x 240 x 15 mm
for ISO 40, HSK 63, PSK 63 (C6)Capacity: 20 tools
Ref.no. 130.535
l x w x h = 860 x 240 x 15 mm
for ISO 40, HSK 63, PSK 63 (C6)Capacity: 29 tools
Ref.no. 130.536
Insertable traymade of V2A steel
l x w x h = 620 x 240 x 50 mm
Ref.no. 130.540
l x w x h = 860 x 240 x 50 mm
Ref.no. 130.541
Steel tray incl. support brackets
l x w x h = 630 x 490 x 20 mm
Ref.no. 130.545
l x w x h = 870 x 490 x 20 mm
Ref.no. 130.546
Document pocketfor format325 x 220 mm
l x w x h = 495 x 60 x 276 mm
Ref.no. 130.521
Deposit panel with corrugated l x w x h = 495 x 215 x 74 mm
Ref.no. 130.522
Utensils box l x w x h = 495 x 95 x 80 mm
Ref.no. 130.523
Universal adapter l x w x h = 495 x 20 x 65 mm
Ref.no. 130.524
9
Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
hole grid
rubber
10
Profile rails
Standard specification:Extruded hollow profile made of aluminiumin fixed lengths for suspension oftool carriers, with fastening borings,ø 9 mm.
480 mm longfor 2 tool carriersWeight 1.0 kg
Ref.no. 127.021
960 mm longfor 4 tool carriersWeight 2.0 kg
Ref.no. 127.022
1920 mm longfor 8 tool carriersWeight 4.2 kg
Ref.no. 127.023
Tool deposit boards
Standard specification:Phenol chip board with foam layer.
240 x 225 mm, equivalent to thelength of 2 tool carriersWeight 1.3 kg
Ref.no. 127.041
Ref.no. 127.042
975 x 225 mm, equivalent to thelength of 8 tool carriersWeight 4.5 kg
Ref.no. 130.018
Tool deposit trays, flat
Standard specification:Made of moulded plastic.
240 x 194 x 20 mm, equivalent to the length of 2 tool carriersWeight 0.2 kg
Ref.no. 127.051
480 x 225 mm, equivalent to the length of 4 tool carriersWeight 2.5 kg
Ref.no. 127.052
480 x 194 x 20 mm, equivalent to the length of 4 tool carriersWeight 0.4 kg
Tool deposit trays, deep
Standard specification:Made of moulded plastic.
240 x 194 x 90 mm, equivalent to the length of 2 tool carriersWeight 0.3 kg
Ref.no. 127.039
Ref.no. 127.040
480 x 194 x 90 mm, equivalent to thelength of 4 tool carriersWeight 0.6 kg
Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
11
Tall Cabinets with Roller Shutters
The two robust steel cabinet optionsare designed for easy access andsecure storage of tools and equipment.Both are equipped with rollershutters for safety and space saving inthe machine shop or tool setting area.
The cabinets are available in the three standard colours:
RAL 7035 light grey
RAL 6011 reseda green
RAL 5019 capri blue
Other colours avaiable on request.
Tall cabinet fortool carriers
UseFor storing tools. To accommodateup to 32 tool carriers.
Standard specificationFitted with 8 profile rails.A transportation base with a height of 100 mm is already integrated.Tool carriers are to be ordered separately.
l x w x h = 1000 x 600 x 2050 mm
Ref.no.
Tall cabinet withremovable shelves
UseFor general storage of machine shopequipment and other small parts.
Standard specificationWith 4 removable shelvesload capacity 100 kg/shelf).A transportation base with a heightof 100 mm is already integrated.
l x w x h = 1000 x 600 x 2050 mm
Colour
RAL 7035RAL 6011RAL 5019
128.013128.014
(128.015)
Ref.no.Colour
RAL 7035RAL 6011RAL 5019
(128.113)(128.114)(128.115)
Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
Ref.no. in brackets ( ) = Delivery time on request
12
Tool Racks
Tool racks, single-sided
1 m long, to accommodate 32 tool carriers (4 per rail).
Standard specificationWith 8 aluminium profile rails.Tool racks are delivered in componentparts and can easily be self-assembled.
l x w x h = 980 x 335 x 1750 mmWeight 33.0 kg
UseFor keeping tools in the store room, in the toolshop and at the toolsetting area. To be fastened at the wall or on the floor.
Standard specificationMade of welded steel square tubing.Colour RAL 7035 light grey.
Ref.no. 128.001
2 m long, to accommodate 64 tool carriers (8 per rail).
Standard specificationWith 8 aluminium profile rails.Tool racks are delivered in componentparts and can easily be self-assembled.
l x w x h = 1940 x 335 x 1750 mmWeight 50.0 kg
Ref.no. 128.002
Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
Morse taper
Steep taper
HSK A-F
MK 1MK 2MK 3MK 4MK 5
ISO 30ISO 40ISO 45ISO 50ISO 60
HSK 32HSK 40HSK 50HSK 63HSK 80HSK 100
68.19968.10068.10168.10268.103
68.20168.20268.20368.20468.205
68.72168.72268.72368.72468.72568.726
13
Taper Cleaning DevicesWipers for Spindles and Tools
Spare brushes(1 set = 3 brushes)
Ref.no.
Cleaning unit
HSK A-F
ISO 40ISO 50
HSK 50 HSK 63 HSK 80 HSK 100
260.302260.304
260.312260.313260.314260.315
260.402260.404
260.412260.413260.414260.415
For tools Size Ref.no.
UseFor a careful cleaning of the outertaper and the plane face through 3 rotating brushes without additionalmedium. Swarfs, residues of oiland coolant water as well as resinous dirt will be taken away.
Standard specificationCleaning unit incl. 1 set of brushes (= 3 brushes)
Forspindles Size Ref.no.
UseTo clean the inner taper of the machine spindle.Standard specificationTaper with bore.
Wipers for spindles
MaterialDimensionally stable plastic,cleaning taper with leather sleeve.
HSK A-F HSK 32HSK 40HSK 50HSK 63HSK 80HSK 100
68.60168.60268.60368.60468.60568.606
For tools Size Ref.no.
UseTo clean the outer taper and plane face of HSK tools..
Wipers for tools
Taper cleaning devices
Drive unit 260.300
DIN 69 871
Cleaning unit
Kelch GmbH • POB 21 20 • D - 71370 Weinstadt • Tel. (+49) 7151 / 20522-0 • Fax (+49) 7151 / 20522-11 • [email protected] • www.kelchgmbh.de
Accessoryflange
Ref.no.
126.701126.702126.703126.704
126.701126.702126.703126.704
126.711126.712126.713126.714
-------
126.301126.302126.303126.304
126.301126.302126.303126.304
126.301126.302126.303126.304
126.350126.351126.352126.353126.354126.355126.356
DIN 2080
DIN 69 871ANSI, CAT
JIS B 6339(MAS 403 BT)
HSK A-F
ISO 30ISO 40ISO 45ISO 50
ISO 30ISO 40ISO 45ISO 50
ISO 30ISO 40ISO 45ISO 50
HSK 25HSK 32HSK 40HSK 50HSK 63HSK 80HSK 100
126.101126.154126.103126.156
126.123126.154126.108126.156
126.128126.154126.118126.156
126.150126.151126.152126.153126.154126.155126.156
126.201126.202126.203126.204
126.223126.211126.208126.207
126.228126.209126.218126.210
126.250126.251126.252126.253126.254126.255126.256
For tools
SizeMounting unit
complete
Ref.no.
Accessory sleeve
Ref.no.
126.501
Accessorystrike plate
Ref.no.
Accessorylocking set
Ref.no.
Standard specificationMounting unit completely mounted,aluminium body, flange, steel sleeve,driving dogs and clamping elements.l x w x h = 330 x 150 x 180 mmWeight 9.8 kg
Material The mounting unit consists of a castaluminium body with a steel sleevefor holding tools vertically and a steelflange for holding tools horizontally.
NoteSoft aluminium strike plate for dismantling tools without causingdamage is not included as standard.It is to be ordered separately.
Germany:Kelch GmbHWerkstrasse 30 D-71384 WeinstadtPhone (+49) 7151 2 05 22-0Fax (+49) 7151 2 05 [email protected]
England:KELCH UK Ltd.Unit 4 Cygnet DriveSwan Valley Business Park
Phone (+44) 1604 58 38 00Fax (+44) 1604 58 38 [email protected]
China:Harbin Measuring &Cutting Tool Group Co., Ltd.44 Heping RoadHarbin China 150040Phone (+86) 451 82641863Fax (+86) 451 82623555www.links-china.com
Switzerland:KELCH AGWeihermattstrasse 14CH-6260 ReidenPhone (+41) 62 75851-26Fax (+41) 62 [email protected]
USA:KELCH Inc.1574 Barclay Blvd.Buffalo Grove IL 60089Phone (001) 847 459-9600Fax (001) 847 [email protected]
02/2
011
Mounting units To facilitate mounting anddismantling of tools beforeand after using.
Mounting unit for ISO tools
Mounting unit for HSK tools
GB - Northampton NN4 9BS
Technical and design modifications are subject to change without notice.
Top Related