7/30/2019 Trailer PM
1/2
PREVENTIVE MAINTENANCE INSPECTION SHEET
PLEASE MAIL A COPY OF THIS INSPECTION ALONG WITH YOUR INVOICE TO
WARNER FLEET SERVICES UPON COMPLETION.
VEHICLE & SERVICE CENTER INFOSHOP NAME: __________________________PHONE#_________________ DATE: ___________________
INSPECTOR NAME: _________________________ YEAR: ___________________
UNIT #:_________________________WFS PO#________________________ MODEL: _________________
VIN #: ___________________________________ MILEAGE: _______________
THIS INSPECTOR MEETS THE QUALIFICATIONS PURSUANT TO
49 CFR SECTION 396.19 __YES __NO
Trailer PM--90 Days
Please Mark Body Damage On Trailer Image
VISUALLY INSPECT AND ADVISE / CHECK EACH ITEM AS COMPLETED
= Satisfactory O = Adjustments or Repairs Made X=Repairs Needed_____ADJUST ALL BRAKES _____GREASE ALL FITTINGS
_______
DOT INSPECTION CURRENT?
BRAKES SAFETY KINGPIN BODY
______ Slack Adjusters ______ Placards & Holders ______ Check For Wear ______ Damage
______ S-Cams & Bushings ______ Fire Extinguishers ______ Check Kingpin Plate For Cracks ______ Electrical
______ Brake Drums SUSPENSION WHEELS ______ Side Panels
_____/32 Brake Linings ______ Springs ______ Oil Seals ______ Graphics
______ Glad Hands ______ Spring Hangers ______ Wheels & Tires ______ Door Operation/Seals
______ Hoses ______ Equalizers ______ Studs & Lug Nuts ______ Door Roller / Hinge
Lube and inspect.______ Drain Air Tank ______ U-Bolts ______ Flaps & Hangers ______ Hose Carriers/Valves
ELEC ______ Cross Members For Cracks ______ Floor Damage
______ Turn Signals ______ Air Bags and Height ______ Inspect Welds
______ Tail Lights CODE LIFT GATE (form lg101)
______ Clearance Lights And Reflectors _______Completed and attached the Airgas
______ 7 Way Plug and Junction Boxes liftgate supplemental checklist (form lg101).
______ WiringRouting and chaffing
COMMENTS:_______________________________________________________________________________
____________________________________________________________________________________________________________________________________________________________________________________
CERTIFICATION: This vehicle has passed all items for the annual vehicle inspection report in accordance with 49 CFR 396
CERTIFIED INSPECTOR (please print)___________________________SIGNATURE:____________________________________
7/30/2019 Trailer PM
2/2
Odometer or Hubometer_______________ Truck or Trailer VIN________________________ Date:_____/_______/______
Liftgate Make or model:__________________ W/O #_________________ Location:__________________
Mechanic:____________________________ Gate Serial #________________________ WFS PO#___________________
Date of last hydraulic fluid change____________ PM Interval: 90 days
For more detailed information please refer to the product maintenance manuals. Use only Genuine OE replacement
parts.
SUPPLEMENTAL LIFTGATE INSPECTION FOR ALL MODELS
Check for loose or missing nuts, bolts, covers, roll pins, screws and pins
Check for cracked welds at: Columns, runners, platform, chain arms, pump box and door frame
Check platform lowering speed: Range is 15 - 25 seconds. Check "D" valves for proper operation
Check open and close speed: Range is 4-7 seconds in either direction. Adjust if necessary
Checking oil level: Gravity Down with the liftgate open and on the ground the sight glass should be at halflevel. Power Down open liftgate and raise to bed height the sight glass should be at half level. Check forcontamination, change if needed.
Checking oil level: Check for contamination, change if needed.
Check batteries on Trailer gates: load test, corrosion, cables, hold downs and water level
MAXON BMRA Series ADDITIONAL INSPECTION ITEMS
SUPPLEMENTAL LIFTGATE PREVENTATIVE MAINTENANCE CHECKLIST
(FORM LG101)
Check Upon Completion " "
Check Upon Completion " "
Check chains for twisting wear or link damage
Check operation of cart stop ramps
Inspect wear on slide pads. See if shimming is required
Check all charging and ground cable connections
Verify if the Quarterly or Annual PM is Due by checking the PM sticker on the Roadside Liftgate column
Check for Oil Leaks at: cylinders, fittings, hoses, valves, oil filter and fittings inside of pump box
Check for damage: bent ramps, platform, column, runners and runners hydraulic tubes
Dual pump units: If equipped, alternate switch position to alternate pump and motor
Replace spin on filter in pump box and change hydraulic fluid.
Check platform pins and couplers. Check roller assemblies
Check platform raising speed: Range is 20-40 seconds
Check switches, circuit breaker and wiring connections at the gate as well as inside pump box. Also checkground straps
Check the gear pump for unusual noise. I.e.. Squealing or extreme RPM output
THIS ONLY NEEDS TO BE DONE ONCE
ANNUALLY.
Top Related