TMCR-VF
A
C
B
●Specifications
Mainshaft motor : AC servo motorX and Y axis motor : AC servo motorPower supply : 3-phase 200-240 / 380 / 415V 50/60Hz Single-phase 200-240VRevolution : Max. 1,100 rpmPower consumption : 1.2KWFactory options : Automatic lubrication system, SBC (Smart Bobbin Changer), UBC II (Bobbin Changer II), ESQ-C (Easy Sequin Device Color Change Type), Sequin Device IV, Seed Beads DeviceDealer option : Beam sensor, Boring device II, Position Marker
Head interval
TMCP-V0620F(550×200)DTMCP-V0912F(680×345)STMCP-V0918F(800×400)STMCP-V0920F(680×330)STMCP-V1204F(680×400)STMCP-V1212F(680×345)STMCP-V1215F(680×400)S
6999121212
2012182041215
200D(W)345S400S330S400S345S400S
550 × 200(400)680 × 345800 × 400680 × 330680 × 400680 × 345680 × 400
5,3655,4558,5657,9152,8655,4557,355
1,6101,8202,0801,8201,8201,8201,820
1,6351,6351,6351,6351,5351,6351,635
NeedlesModel Embroidery space [mm]D × W A B C
Multicolor heads
• Contact us for other specifications and more details.
Factory option
ESQ-C (Easy Sequin Device Color Change Type)
The ESQ-C realizes sequin embroidery accuracy. It also drastically improves and shortens the adjustment time. This has been realized by redesigning the complex mechanism of the Sequin device. It’s much easier to interchange sequin sizes than before.
SBC (Smart Bobbin Changer)
Replacement bobbins are held and set into their respective rotary hooks.Completed in only 6 seconds!!It takes the SBC only 6 seconds to replace the bobbins on all heads.Because replacement bobbins can be set beforehand while the embroidery machine is in operation, the downtime of the machine due to bobbin replacement can be drastically reduced.
View by video clip.
E l e c t r o n i c M u l t i - h e a d A u t o m a t i c E m b r o i d e r y M a c h i n e
S E R I E S
�e new world standard.High productivity High stability High usability High durability
Exquisite and Impressive embroidery
1809A_01
Please contact our distributor listed below.
* The specifications and designs of our products are subject to change without notice for performance improvement.
http://www.tajima.com https://www.facebook.com/TajimaGroup
19-22, Shirakabe 3-chome, Higashi-ku Nagoya 461-0011 JAPANTEL. +81-52-932-3444, 3445 FAX. +81-52-932-2457, 3449
Seller
Manufacturer
*The actual embroidery area and embroidery speed may vary depending on the items being produced, the machine model, and the embroidering conditions.
*Caution: No registered trademark or product design contained in this catalog may be used without prior permission from the manufacturer.
Features
The FS mode is standardly equipped on all models. The FS Mode dramatically improves the quality of embroidery done with
thick or soft-twisted thread that was unsuitable for embroidery machines in the past.
• Options for more beautiful embroidery of soft-twisted thread.• The rotation speed is limited when using the FS mode.
Needle:DB×K5Z1FS
Thread guide:φ22
Needle Plate:2.5φ 34φ×dent 0.5
Without FS mode
E l e c t r o n i c M u l t i - h e a d A u t o m a t i c E m b r o i d e r y M a c h i n e
S E R I E S
FS mode to expand material variations
On to newer heights
Various operation switches and multi-color LEDs are located on each tension base.
Since all of the main functions of the operation panel can be manipulated at each head, operator work efficiency has been improved.
Commonly used functions may be assigned to the custom switches. (Scheduled for 2018)
The TMCP-VF SERIES has more improved stitching stability and embroidery quality than the TFGN-II series. To enhance the
machine foundation, the output of the frame drive motors is improved and an energy efficient AC servo motor is adopted as a
main shaft motor. Also, a reinforced sash; which was introduced for large machines, has been adopted to all TMCP-VF series.
Automatic Color Change Glass Bead
embroidery device. It is automated allowing
you to embroider beads rapidly instead of
by hand so that mass production becomes
possible. Also, the beads are set in a tape
reel so it is easy to exchange and manage.
Frame back, forward
Auto Trim & Hold
Custom Switch ①
Custom Switch ②
Head ON Switch
Head OFF Switch
Presser Foot UP
Presser Foot DOWN
L-side R-side
Direct command switches
Seed Beads Device (Factory option)
View by video clip.
The stitching is more stable because of the wider sash.
TMCR-VF
A
C
B
●Specifications
Mainshaft motor : AC servo motorX and Y axis motor : AC servo motorPower supply : 3-phase 200-240 / 380 / 415V 50/60Hz Single-phase 200-240VRevolution : Max. 1,100 rpmPower consumption : 1.2KWFactory options : Automatic lubrication system, SBC (Smart Bobbin Changer), UBC II (Bobbin Changer II), ESQ-C (Easy Sequin Device Color Change Type), Sequin Device IV, Seed Beads DeviceDealer option : Beam sensor, Boring device II, Position Marker
Head interval
TMCP-V0620F(550×200)DTMCP-V0912F(680×345)STMCP-V0918F(800×400)STMCP-V0920F(680×330)STMCP-V1204F(680×400)STMCP-V1212F(680×345)STMCP-V1215F(680×400)S
6999121212
2012182041215
200D(W)345S400S330S400S345S400S
550 × 200(400)680 × 345800 × 400680 × 330680 × 400680 × 345680 × 400
5,3655,4558,5657,9152,8655,4557,355
1,6101,8202,0801,8201,8201,8201,820
1,6351,6351,6351,6351,5351,6351,635
NeedlesModel Embroidery space [mm]D × W A B C
Multicolor heads
• Contact us for other specifications and more details.
Factory option
ESQ-C (Easy Sequin Device Color Change Type)
The ESQ-C realizes sequin embroidery accuracy. It also drastically improves and shortens the adjustment time. This has been realized by redesigning the complex mechanism of the Sequin device. It’s much easier to interchange sequin sizes than before.
SBC (Smart Bobbin Changer)
Replacement bobbins are held and set into their respective rotary hooks.Completed in only 6 seconds!!It takes the SBC only 6 seconds to replace the bobbins on all heads.Because replacement bobbins can be set beforehand while the embroidery machine is in operation, the downtime of the machine due to bobbin replacement can be drastically reduced.
View by video clip.
E l e c t r o n i c M u l t i - h e a d A u t o m a t i c E m b r o i d e r y M a c h i n e
S E R I E S
�e new world standard.High productivity High stability High usability High durability
Exquisite and Impressive embroidery
1809A_01
Please contact our distributor listed below.
* The specifications and designs of our products are subject to change without notice for performance improvement.
http://www.tajima.com https://www.facebook.com/TajimaGroup
19-22, Shirakabe 3-chome, Higashi-ku Nagoya 461-0011 JAPANTEL. +81-52-932-3444, 3445 FAX. +81-52-932-2457, 3449
Seller
Manufacturer
*The actual embroidery area and embroidery speed may vary depending on the items being produced, the machine model, and the embroidering conditions.
*Caution: No registered trademark or product design contained in this catalog may be used without prior permission from the manufacturer.
Top Related