TM001028E
Administrator Course
TM001028E
TM001028E
Content Of Administrator Course
•Log-On to VaporTracer2
•Menus
•Interfacing with a computer
•Advanced Menu Functions
TM001028E
Log On to VaporTracer2
0 0
MENU TO QUIT
- - - ENTER CODE - - -
0
- ENTER - TO ACCEPT
Enter PIN ‘Enter PIN ‘0-00-0--00’ to return to Operator mode’ to return to Operator mode
Administrator PIN is Administrator PIN is ******
Administrator Access
TM001028E
Menus
MENU2 CAL ON SUBSTANCECLEAN SECONDS 15INTEGRATION TIME 5SAMPLE TIME 2PLASMAGRAM
Defaults are set at the factory for optimal performance, and should not be altered without consulting GE IonTrack Technical Service!
Menu 2
TM001028E
Plasmagram
2 4 MS
1k
0
Configuration
COCAIN 7. 60 -0.08 +0.08
HEROIN 8.48 -0.04 +0.08
THC 8.40 -0.04 +0.04
METHAM 6.48 -0.08 +0.08
MDMA 6.08 -0.04 +0.04
EPHDRI 5.64 -0.04 +0.04
PEAKS
HEIGHT TIME (ms)
6629 3.083
1905 7.012
Menus
TM001028E
Menus
MENU3 ADJUST WINDOWSCAL FLOWSAVE RAWCONNECT IR
PKSWIRE
Menu 3
TM001028E
Interfacing with a Computer
Advanced functions can be accessed when interfaced with a computer.
These include:
• Downloading, viewing, and deleting alarm and plasmagram files
• Advanced Menu Functions
• Upgrading Software
• Special Viewing Options
Advanced Functions
TM001028E
1.1. Insert the CD into the CD-Rom driveInsert the CD into the CD-Rom drive2.2. The installation dialog box will appearThe installation dialog box will appear3.3. Click on ‘Install ActiveSync 3.0’Click on ‘Install ActiveSync 3.0’4.4. Follow the prompts to complete installationFollow the prompts to complete installation5.5. At ‘Get Connected’ dialog box click ‘Cancel’At ‘Get Connected’ dialog box click ‘Cancel’6.6. Click ‘OK’ at the Microsoft dialog boxClick ‘OK’ at the Microsoft dialog box7.7. The installation dialog box will reappearThe installation dialog box will reappear8.8. Click on ‘Install ITMS software to control the VaporTracer2’Click on ‘Install ITMS software to control the VaporTracer2’9.9. The Software will install and the itms-vt Icon will appear on the computer The Software will install and the itms-vt Icon will appear on the computer
desktopdesktop
Installing Active Sync and ITMS
Interfacing with a Computer
TM001028E
MENU3 ADJUST WINDOWSCAL FLOWSAVE RAWCONNECT IR
PKSWIRE
Interfacing with a Computer
Connect
TM001028E
Active Sync icon located in the Task Bar. Shown dark (not connected)
The Task Bar will be located at the bottom, or right side of your computer screen.
Location of Active Sync icon
Interfacing with a Computer
TM001028E
Select Select CancelCancel at the at the Partnership ScreenPartnership Screen
Press OK at the Press OK at the ‘‘Partnership Not Set Up’ screen.Partnership Not Set Up’ screen.
Interfacing with a Computer
TM001028E
Log-on to itms-vt Software
Interfacing with a Computer
TM001028E
Log-On to itms-vt Software
Interfacing with a Computer
TM001028E
Plasmagram and SelectScan
Plasmagram SelectScan
Interfacing with a Computer
TM001028E
Press <G> on computer keyboard to retrieve files
Pressing OK on this dialog box will take you to “VT alarms” folder.
Retrieving Files
Interfacing with a Computer
TM001028E
Deleting Alarm Files – Press Shift <E> on keyboard
Deleting Files
Interfacing with a Computer
TM001028E
Advanced Features
Recall and print files, print config
TM001028E
Alarm - ALM00000.sca - Opened
Press Menu, Recall & Press Menu, Recall & Select a downloaded file to Select a downloaded file to open.open.
Advanced Menu Functions
Recalling Alarms
TM001028E
Advanced Menu Functions
Insert the upgrade disk into the computer CD Rom driveInsert the upgrade disk into the computer CD Rom drive Press <ALT-U> on the computer.Press <ALT-U> on the computer. When prompted, press the ENTER button on the VaporTracerWhen prompted, press the ENTER button on the VaporTracer22.. Click OK when the Click OK when the Upgrade NowUpgrade Now message appears. message appears. Once the upgrade has been completed, the VaporTracerOnce the upgrade has been completed, the VaporTracer22 will restart will restart
automatically.automatically.
Upgrading Software
TM001028E
Upgrading VaporTracer2 Software
Advanced Menu Functions
TM001028E
• Options• Configuration• Substances• Notes• Manual Calibrate• Find Match• Recalled file
views• Zoom Function
Advanced Menu Functions
TM001028E
Administrator Menu Functions
Defaults are set at the factory and should not be altered without consulting GE
IonTrack Technical Service!
Advanced Menu FunctionsOptions
TM001028E
LabelsAdvanced Menu Functions
TM001028E
Advanced Menu Functions
5
2
Configuration
TM001028E
Defaults are set at the factory and should not be altered without consulting GE
IonTrack Technical Service!
Advanced Menu FunctionsSubstances
TM001028E
Advanced Menu FunctionsNotes, Zoom, and Help
TM001028E
Calibrate, Find Match, and Cancel
Advanced Menu Functions
TM001028E
Intensity Map Processed 3D
Advanced Menu Functions
Intensity Map and Processed 3D
TM001028E
Zoom Function
Advanced Menu Functions
TM001028E
•Log-On to VaporTracer2
•Menus
•Interfacing with a computer
•Advanced Menu Functions
Course Review
Top Related