3
Technical insulation
ISOTECTRADEMARK
Isotec Vostok is a dynamically developing company manufacturing the technical insulation based on mineral wool under the ISOTEC trademark. The company is a joint-venture of the international concerns Saint-Gobain (ISOVER trademark) and Isoroc (ISOROC trademark). At the company facilities located in Egorievsk, Tambov and Chelyabinsk, a complete line of Stonewool and fiberglass slabs, mats and pipes are being made. Our manufacture is equipped with up-to-date high-technology equipment, we use the high quality raw materials only, which allow us to make fibers of the highest quality. ISOTEC heat insulating materials have high thermophysical and operating characteristics, meet the strictest requirements of the today’s production operations.
It is important that the ISOTEC products are manufactured based on our own specifications, which include the up-to-date requirements of the Russian and European norms.
Using ISOTEC materials, you can find an optimum solution for any case. The ISOTEC technical insulation will ensure reliable, efficient and safe operation of your equipment during all its life time.
The highest quality and reliability of our materials are guaranteed by the tests, certificates and approvals. The most important among them are:
CERTIFICATION
— certificate of conformity (TU or GOST);
— expert opinion on the product conformity to the uniform sanitation-and-epidemiological and hygienic requirements for the goods;
— results of chemical tests of the fiber;
— certificate of conformity to the technical regulation for the fire safety requirements;
— results of physical and mechanical characteristic tests;
— results of sound tests;
— results of fire-response tests of materials and structures.
5
Technical insulation
4 Catalogue 2015www.isotecti.ru
ECOLOGICAL SAFETY
ISOTEC technical insulation products are safe for human health and environment.
MATS are flexible heat insulating products, which are supplied in rolls, can be stitched with steel wire, fiber glass filaments or fiberglass roving (wired mats) and have a revetment of one or both sides from various materials (wire screen, foil, glass fibre fabric, glass cloth etc). In corrugated mats the general orientation of fibres is perpendicular to the basic surfaces of the product, which gives an additional elasticity and considerably reduces the slab deformation during installation on convoluted surfaces. The mats are used for heat insulation of pipelines and equipment of the industrial facilities. The products are wrapped around the insulated surface and are attached with pins, bandages or wire rings depending on design type.
SLABS are heat insulating products rectangular in shape in shape with rectangular cross-section. The slab thickness is significantly lesser than other sizes and invariable with regard to the entire product. The labs are normally used for insulation of flat surfaces of the equipment, large tanks and rectangular ducts.
PiPeS are the heat insulating products cylindrical in shape, which can be produced without coatings or with the coatings made of various materials. The most spread are the pipes usually coated with aluminium foil. The heat insulating pipes are designed for use as heat-, sound insulation and fire protection of smoke stacks, pipelines, gas ducts of the industrial and electric power equipment. The pipes have usually a lengthwise cut due to what it is convenient to mount them on the pipeline.
TypES OF hEAT INSULATING MINERAL wOOL pRODUCTS
ISOTEC products have high sound-absorbing properties and may be used for noise level reduction in various industries.
SOUND INSULATION
CHEMICAL RESISTANCE
ISOTEC mineral wool has neutral infiltrate wool array medium, does not react with all known oils and solvents, resistant to subacid and sour environments, is absolutely resistant to sulfate-alkaline media, is no chemical reaction catalyst or ingibitor. These factors cause the high chemical resistance of ISOTEC products - ability to maintain their structure when exposed to various organic substances, petroleum derivatives, solvents, solutions of moderate acids and alkalis.
ChARACTERISTICS OF TEChNICAL INSULATION ISOTEC
The basic parameter of quality heat insulating materials is the heat conductivity factor. The heat conductivity is an ability of the material to conduct the heat. The less the heat conductivity factor, the higher its ability to maintain the heat. The ISOTEC materials have the low heat conductivity factor. They can maintain the high heat insulating properties under various conditions.
ISOTEC mineral wool have an excellent hydrophobic property, i.e. ability to not to be watered. Even if some moisture gets into the wool, it will easily evaporated due to water-repellent properties and excellent vapor permeability. This allows to restore completely the heat insulating characteristics of the material after drying.
ISOTEC mineral wool shows perfect fire-protection properties, i.e. ability to withstand high temperature exploration without inflammation, structural rupture, strength and other properties. ISOTEC materials are used for fire-prevention insulation, when particular requirements are imposed to fire-resistance rating of building structures and engineering systems.
STRENGTH
One of the basic properties of ISOTEC materials is the deformation resistance during compression and stretching, vibration resistance, by virtue of which the insulation characteristics of the material are maintained.
HEAT CONDUCTIVITY FACTOR HYDROPHOBIC PROPERTY FIRE RESISTANCE
CORROSION RESISTANCE
The mineral wool heat insulation does not contribute to corrosion occurrence, as it prevents from access of the moisture and other aggressive substances to metal surfaces. Different coatings of heat insulating materials enhance even more their manufacturability and reduce the risk of corrosion occurrence.
76 Catalogue 2015www.isotecti.ru
The shipbuilding has extraordinarily strict requirements, fire protection is a matter of the first concern; in fact the question is on passengers’ safety onboard. In addition, the huge attention is paid to weight reduction of the materials being used. We offer an optimum solution - ULTIMATE product, new generation of high-technology mineral wool. ULTIMATE combines all advantages of the traditional mineral wool products (provides fire protection, heat and sound insulation), and at the same time this material has an extraordinary light weight.
The ULTIMATE thermal parameters improve considerably the energy efficiency. And as the material is extraordinary light and is supplied in a compressed form, its transportation and storage require less space. Due to this, the material is installed quickly, simply and with the minimal expenses. Save your money, time and space!
The wide range of ours products is successfully integrated into the most different products of other production areas - household appliances, passenger cars and lorries etc.
A
SHIPBUILDING
A — Shelf oil and gas platformsB — Passenger ships and ferriesC — Tankers and container shipsD — Auxiliary and rescue ships
COMPONENT PARTS FOR OTHER MANUFACTURES (OEM), FIRE PROTECTION
A — Household appliances B — Passenger cars and lorries, railroad transport
The wide range of our products is successfully integrated in the most different products from other production areas - household appliances, passenger cars and lorries.
A B
C
D
B
AppLICATIONS OF ISOTEC TEChNICAL INSULATION
INDUSTRYHEATING, VENTILATION AND AIR CONDITIONNING SYSTEMS (HVAC)
A — Self-supported air ducts B — Metal air ductsC — Water pipelines
The HVAC systems are designed in order to provide the comfort parameters of microclimate in a room.
We offer a wide range of products for air ducts, pipelines, heat exchangers, air conditioners and other HVAC equipment, in order to not only to provide a required comfort level, but also to reduce power consumption and ensure fire protection of the structures. Our solutions may be adapted to any Consumer needs for any applications. The mineral glass or rock wool ensures excellent thermal and sound characteristics.
A — Pipelines — Process pipelines — Big-diameter process pipelines B — Vessels and process tanksC — Steam boilers — Walls — RoofD — Smokestacks and gas ducts — Vent and smoke ducts e — Equipment and dead space
We make heat insulating mineral wool products with a wide range of working temperatures in accordance with GOST 21880 and EN 14303. Our products are used in various industrial sectors - from natural resource providers to processing (including petrochemical) and food industries.
ISOTEC technical insulation is used everywhere, where the pipeline temperatures should be maintained within the range, heat losses should be minimized, in order to provide the desired
conditions of technological processes, thus ensuring stability and safe operation of the equipment. We offer a complete range of mineral wool products, in order to satisfy demands of any Customer. These are light-weight and elastic mineral glass and rock wool products withstanding the high temperatures and mechanical stress.
A
A
B
B B
B
C
C
C
D
D
e
e
98
Technical insulation
Catalogue 2015www.isotecti.ru
Application Form / diameter Function of insulation
p. 26 p. 26 p. 26 p. 26 p. 26 p. 30 p. 28 p. 14 p. 14 p. 14 p. 14 p. 15 p. 15 p. 12 p. 12 p. 12 p. 12 p. 29 p. 18 p. 18 p. 19 p. 29 p. 29 p. 20 p. 20 p. 21 p. 28 p. 16 p. 22
iSOT
eC M
at-A
L
iSOT
eC M
at L
ight
iSOT
eC M
at L
ight
-AL
iSOT
eC F
lex
iSOT
eC F
lex-
AL
iSOT
eC M
-25
iSOT
eC M
-25
- AL1
iSOT
eC W
ired
Mat
60
iSOT
eC W
ired
Mat
80
iSOT
eC W
ired
Mat
80-A
L
iSOT
eC W
ired
Mat
80-A
L2
iSOT
eC W
ired
Mat
100
iSOT
eC W
ired
Mat
125
iSOT
eC S
ectio
n
iSOT
eC S
ectio
n-AL
iSOT
eC S
hell
iSOT
eC S
hell-
AL
iSOT
eC T
ank
slab
GW
40
iSOT
eC T
ank
slab
SW
60
iSOT
eC T
ank
slab
SW
80
iSOT
eC T
ank
slab
SR1
00
iSOT
eC in
dust
rial s
lab
G40
iSOT
eC in
dust
rial s
lab
GR70
iSOT
eC in
dust
rial s
lab
S80
iSOT
eC in
dust
rial s
lab
S100
iSOT
eC in
dust
rial s
lab
S150
iSOT
eC H
VAC
Slab
iSOT
eC M
P-75
, MP-
100
iSOT
eC F
ire P
rote
ctio
n Co
ncre
te
Air ducts and vent equipment
Rectangular Protection against condensate ++ + + + + +Heat insulation ++ + + + + + + + + + + + ++ +Sound insulation ++ + + + + + + ++Fire protection ++ ++ +
Round Protection against condensate ++ + + +Heat insulation ++ + + + + + + + + + + + + Sound insulation ++ + + + + + +Fire protection ++ ++ +
Pipelines Ø < 300 mm Protection against condensate ++ + + + + + ++ +Heat insulation ++ + + + + + + + + + + ++ + ++ + + +Sound insulation ++ + + + + + ++ + ++ + +Fire protection ++ ++ + +
Ø > 300 mm Protection against condensate ++ + + + ++ +Heat insulation ++ + + + + + + + + ++ + ++ ++ +Sound insulation ++ + + + ++ + ++ ++Fire protection ++ ++ ++ +
Equipment and tanks Flat surfaces Protection against condensate ++ + + ++ +Heat insulation + + + + + ++ + ++ + ++ ++ + ++ ++ ++ + +Sound insulation + + + + ++ + ++ + ++ ++ + ++ ++ ++ +Fire protection + + + + + +
Convoluted surfaces Protection against condensate ++ + + ++ + + +Heat insulation + + + + + + + + + + + ++ + ++ ++ + ++ ++ ++ + + +Sound insulation + + + + + + + + + + ++ + ++ ++ + ++ ++ ++ +Fire protection + + + + + ++ + + + + +
Fire protection Flat surfaces Fire protection + +
pRODUCTS AND AppLICATIONS
11
Technical insulation
10 Catalogue 2015www.isotecti.ru
EXCELLENT HEAT INSULATION
COST-EFFECTIVE SOLUTIONS
REX -TEChNOLOGySTONEwOOL MANUFACTURE
LaminatingCuttingPacking
Raw materials preparation
Coak Basalt and Additives
Melting furnace
Fiberization unit
Addition of bonding agent
Polymerization
Stonewool products are used where at a high temperature the insulated surface requires a particular mechanical strength of the material.
STONEwOOL pRODUCTS
HIGH OPERATING TEMPERATURES
EFFICIENT FIRE PROTECTION
°С
MECHANICAL STRENGTHSAFE FOR THE ENVIRONMENT
12 13
Stonewool products Technical insulation
Catalogue 2015www.isotecti.ru
The pipes may be packed in cardboard boxes or polyethlene film with manual packing.
The pipes coated with aluminium foil may be completed with special aluminium adhesive tape.
20 30 40 50 60 70 80 90 100Thickness, mm
18
Insi
de d
iam
eter
, mm 20 15 12 6 4
21 24 12 9 6 425 24 12 8 6 4 1 1 1 128 20 12 7 6 4 1 1 1 132 15 12 7 5 1 1 1 1 135 15 12 7 5 1 1 1 1 138 15 9 7 5 1 1 1 1 142 12 8 6 4 1 1 1 1 145 12 8 6 4 1 1 1 1 148 12 7 6 4 1 1 1 1 154 12 7 5 1 1 1 1 1 157 9 6 5 1 1 1 1 1 160 9 6 5 1 1 1 1 1 164 8 6 4 1 1 1 1 1 170 6 6 4 1 1 1 1 1 176 6 5 4 1 1 1 1 1 183 6 4 1 1 1 1 1 1 189 6 4 1 1 1 1 1 1 1
102 4 1 1 1 1 1 1 1 1108 4 1 1 1 1 1 1 1 1114 1 1 1 1 1 1 1 1 1133 1 1 1 1 1 1 1 1 1159 1 1 1 1 1 1 1 1 1169 1 1 1 1 1 1 1 1194 1 1 1 1 1219 1 1 1 1 1 1273 1 1 1 1
60 70 80 90 100Thickness, mm
325
Insi
de d
iam
eter
, mm
3 3 3 3 3375 4 4 4 4 4426 4 4 4 4 4530 4 4 4 4 4630 6 6 6 6 6720 6 6 6 6 6820 6 6 6 6 6
1020 6 6 6 6 6
PACKING
SOTEC Cylinder-AL-20х18/Ch-1200 – Isotec trademark product, product name — cylinder, product design variant - with coating from aluminium foil having aluminium thickness of up to 20 µm, thickness— 20 mm, inside diameter of product — 18 mm, produced in — Ч (Chelyabinsk), T (Tambov), product length — 1200 mm.
EXAMPLE OF IDENTIFICATION MARK
Packing list iSOTeC Section (pcs per box)
30 40 50 60 70 80 90Thickness, mm
18
Insi
de d
iam
eter
, mm 18 12 5 5 3 2 2
21 16 5 5 5 3 2 225 14 5 5 5 3 2 228 13 5 5 3 2 2 232 13 5 5 3 2 2 235 12 5 5 3 2 2 242 5 5 5 3 2 2 245 5 5 5 3 2 2 248 5 5 3 2 2 2 254 5 5 3 2 2 2 257 5 5 3 2 2 2 260 5 5 3 2 2 2 264 5 5 3 2 2 2 270 5 3 2 2 2 2 276 5 3 2 2 2 2 289 3 2 2 2 2 2 2
108 2 2 2 2 2 1114 2 2 2 2 2 1133 2 2 2 2 2 1159 2 2 1 1 1 1219 1 1 1 1 1273 1 1 1
Packing list iSOTeC Shell (running meter per box)
Packing list iSOTeC Shell (running meter per box)
- Polyethene packing
ISOTEC Shell (cutout pipes)
Heat insulating Stonewool products in the form of hollow pipes or semipipes, made with a lengthwise cut for installation purposes. May come both without coatings and coated with aluminium foil.
Heat insulation of the pipelines for various purposes used in the power industry facilities, in the enterprises of various industrial sectors, in the systems of pipeline transportation, heat supply, ventilation,
air-conditioning and other technological systems.
pIpES AND SEMI-pIpES ISOTEC Section (spirally rolled pipes)
APPLICATION
TECHNICAL CHARACTERISTICSISOTEC Section
ISOTEC Shell
Density, kg/m3 125±10%1) 160±10% 90
Inside diameter, mm 18-273 18-273 18-273
Length, mm 1200 1200 1000
Wall thickness, mm from 30 to 100 incl.1) 20 from 30 incl. to 90 incl.1)
λ10, Вт/m·К 0,036 0,036 0,039
λ25, Вт/m·К 0,038 0,038 0,046
λ125, Вт/m·К 0,049 0,048 0,067
λ300, Вт/m·К 0,089 0,087 0,110
Fire hazard class КM0 / КM12) КM0 / КM12) КM0 / КM12)
Flammability groupNoncombustible,
Combustible2)Noncombustible,
Combustible2)Noncombustible,
Combustible2)
Maximum operating temperature, °С 6503) 6503) 6403)
1) If next to the range limit value the abbreviation “through” (which means “included”) is specified, the range limit value belongs to the range. An example of a range record: from 30 through 35 - the range is included between two boundary, thus the left limitr of the range “30” does not belong to the range, but the right one - “35” – is included in the range.
2) For fire hazard class and flammability class – prior to slash the fire hazard
class and flammability class are specified for a product without coating, after slash the class (group) is specified for a product with coating AL (aluminium armoured foil with thickness of aluminium up to 20 µm).
3) For foil-coated products the maximum surface temperature is100 °С.
14 15
Stonewool products Technical insulation
Catalogue 2015www.isotecti.ru
ISOTEC Wired mat100
ISOTEC Wired mat125
The finished products in containerettes may be put on the pallets (trays) without prepressing or using additional pressing. The aluminium foil-coated products may be completed with a special aluminium adhesive tape.
Dimensions, mm PackingCapacity in vehicle of 92 m3
Capacity in vehicle of 120 m3
length width thickness pcs m2 m3 packs m3 packs m3
ISOTEC Wired mat60 и ISOTEC Wired mat80
5 000 1 000 30 1 5,00 0,15 533 80 767 115
5 000 1 000 40 1 5,00 0,2 400 80 575 115
4 000 1 000 50 1 4,00 0,2 400 80 575 115
3 000 1 000 60 1 3,00 0,18 444 80 639 115
2 000 1 000 70 1 2,00 0,14 571 80 821 115
2 000 1 000 80 1 2,00 0,16 500 80 719 115
2 000 1 000 90 1 2,00 0,18 444 80 639 115
2 000 1 000 100 1 2,00 0,2 400 80 575 115
2 000 1 000 110 1 2,00 0,22 364 80 523 115
2 000 1 000 120 1 2,00 0,24 333 80 479 115
ISOTEC Wired mat100 и ISOTEC Wired mat125
5 000 1 000 30 1 5,00 0,15 513 77 700 105
5 000 1 000 40 1 5,00 0,2 385 77 525 105
4 000 1 000 50 1 4,00 0,2 385 77 525 105
3 000 1 000 60 1 3,00 0,18 428 77 583 105
2 000 1 000 70 1 2,00 0,14 550 77 750 105
2 000 1 000 80 1 2,00 0,16 481 77 656 105
2 000 1 000 90 1 2,00 0,18 428 77 583 105
2 000 1 000 100 1 2,00 0,2 385 77 525 105
2 000 1 000 110 1 2,00 0,22 350 77 477 105
2 000 1 000 120 1 2,00 0,24 321 77 438 105
PACKING
ISOTEC Wired mat60
ISOTEC Wired mat80
Heat insulation and fire protection of flat, cylindrical, conical and other convoluted surfaces of process and power equipment,
pipelines, air ducts, gas ducts, smoke exhaust systems and other objects.
Flexible heat insulating products with the mantle made of a mesh mechanically joined with heat insulating material. May come with coating made of aluminium armoured foil the aluminium thickness of up to 20 µm (ISOTEC Wired mat80-AL and ISOTEC Wired mat100-AL) and coated with aluminium foil thick from 20 to 40 µm without armouring (ISOTEC Wired mat80-AL2).
TECHNICAL CHARACTERISTICSISOTEC
Wired mat60ISOTEC
Wired mat80ISOTEC
Wired mat100ISOTEC
Wired mat125
Density, kg/m3 60±10% 80±10% 100±10% 125±10%
λ10, Вт/m·К 0,034 0,034 0,034 0,033
λ25, Вт/m·К 0,036 0,035 0,036 0,035
λ125, Вт/m·К 0,060 0,047 0,046 0,044
λ300, Вт/m·К 0,120 0,086 0,079 0,073
Fire hazard class КM0 / КM11) КM0 / КM11) КM0 / КM11) КM0
Flammability groupNoncombustible,
Combustible1)Noncombustible,
Combustible1)Noncombustible,
Combustible1) Noncombustible
Maximum operating temperature, °С 5502) 6402) 6602) 680
wIRED MATS
APPLICATION
iSOTeC WiReD MAT80-СM-50/Ч- 1000x4000 — Isotec trademark product, product name — wired mat, product design variant – with coating made of steel mesh, thickness — 50 mm, produced in — Ч (Chelyabinsk), T (Tambov), product width — 1000 mm, product length — 4000 mm.
EXAMPLE OF IDENTIFICATION MARK
1) For fire hazard class and flammability class - the fire hazard class and flammability class are specified for a product without coating, after slash the class (group) is specified for a product with coating AL (aluminium armoured foil with thickness of aluminium up to 20 µm), AL2 (foil with thickness of 20 to 40 µm without armouring), SM (steel mesh).
2) For foil-coated products the maximum surface temperature is 100 °С.
Coating Thickness, mm
Fire-resistance rating, EI
30 60
60 90
80 150
FIRE-RESISTANCE RATING OF STEEL AIR DUCTS WITH
COATING MADE OF WIRED MATS ISOTEC WIRED MAT80-SM
16 17
Stonewool products Technical insulation
Catalogue 2015www.isotecti.ru
Before packing, the mats are rolled in rolls. Each roll is packed into the polyethylene shrinkable film or plastic bag, forming a package.
PACKING
Dimensions, mm PackingCapacity in vehicle of 92 m3
Capacity in vehicle of 120 m3
length width thickness pcs m2 m3 packs m3 packs m3
ISOTEC MP-75
5 000 1 000 30 1 5,00 0,15 513 77 700 105
5 000 1 000 40 1 5,00 0,2 385 77 525 105
4 000 1 000 50 1 4,00 0,2 385 77 525 105
3 000 1 000 60 1 3,00 0,18 428 77 583 105
2 000 1 000 70 1 2,00 0,14 550 77 750 105
2 000 1 000 80 1 2,00 0,16 481 77 656 105
2 000 1 000 90 1 2,00 0,18 428 77 583 105
2 000 1 000 100 1 2,00 0,2 385 77 525 105
2 000 1 000 110 1 2,00 0,22 350 77 477 105
2 000 1 000 120 1 2,00 0,24 321 77 438 105
ISOTEC MP-100
5 000 1 000 30 1 5,00 0,15 533 80 767 115
5 000 1 000 40 1 5,00 0,2 400 80 575 115
4 000 1 000 50 1 4,00 0,2 400 80 575 115
3 000 1 000 60 1 3,00 0,18 444 80 639 115
2 000 1 000 70 1 2,00 0,14 571 80 821 115
2 000 1 000 80 1 2,00 0,16 500 80 719 115
2 000 1 000 90 1 2,00 0,18 444 80 639 115
2 000 1 000 100 1 2,00 0,2 400 80 575 115
2 000 1 000 110 1 2,00 0,22 364 80 523 115
2 000 1 000 120 1 2,00 0,24 333 80 479 115
ISOTEC MP-75
ISOTEC MP-100
Heat- and sound insulation of technical and power equipment, storage tanks for hot and cold water, oil, petroleum products, chemical substances, and pipelines of hot and cold water heating system, process
pipelines of all industrial sectors at the temperature of insulated surface of minus 180°С to 700°С.
The flexible fibered heat insulating products supplied rolled in the form of rolls or in expanded form. The mats as per GOST 21800-2011 under ISOTEC trademark may come without linings or with the lining made of steel mesh on the one side.
Mаты AS pER GOST 21880-2011
APPLICATION
TECHNICAL CHARACTERISTICSISOTEC MP-75
ISOTEC MP-100
Density, kg/m3 from 50 to 75 incl.1) from 75 to 100 incl.1)
λ10, Вт/m·К 0,037 0,036
λ25, Вт/m·К 0,039 0,038
λ125, Вт/m·К — 0,050
λ300, Вт/m·К — 0,120
Fire hazard class КM0 КM0
Flammability group Noncombustible Noncombustible
Maximum operating temperature, °С 700 700
1) f next to the range limit value the abbreviation “through” (which means “included”) is specified, the range limit value belongs to the range. An example of a range record: from 30 through 35 - the range is included between two boundary, thus the left limit of the range “30” does not belong to the range, but the right one - “35” – is included in the range.
18 19
Stonewool products Technical insulation
Catalogue 2015www.isotecti.ru
Dimensions, mm PackingCapacity in vehicle of 92 m3
Capacity in vehicle of 120 m3
length width thickness pcs m2 m3 packs m3 packs m3
ISOTEC Tank slab SW60
1 000 600 30 12 7,2 0,22 341 74 463 100
1 000 600 50 8 4,8 0,24 307 74 417 100
1 000 600 100 4 2,4 0,24 307 74 417 100
1 000 600 200 2 1,2 0,24 307 74 417 100
ISOTEC Tank slab SW80
1 000 600 30 10 6 0,18 409 74 556 100
1 000 600 50 6 3,6 0,18 409 74 556 100
1 000 600 100 3 1,8 0,18 409 74 556 100
1 000 600 200 1 0,6 0,12 613 74 833 100
ISOTEC Tank slab SR100
1 000 600 30 10 6 0,18 409 74 556 100
1 000 600 50 6 3,6 0,18 409 74 556 100
1 000 600 100 3 1,8 0,18 409 74 556 100
1 000 600 200 1 0,6 0,12 613 74 833 100
ISOTEC Tank slab SR100
iSOTeC Tank slab SR100-50/Ч-600x1000 – Isotec trademark product, product name - tank slab, thickness — 50 mm, produced in — Ч (Chelyabinsk), T (Tambov), product width — 600 mm, product length — 1000 mm.
EXAMPLE OF IDENTIFICATION MARK
ISOTEC Tank slab SW80
Heat insulating mineral wool products in rectangular shape.
The heat insulation of tank walls and flat surfaces of equipment, including marine vessels and floating structures.
ISOTEC Tank slab SW80 can withstand the loads of up to 10 kPa, and ISOTEC Tank slab SR100 – up to 15 kPa.
APPLICATION
The slabs can be packed as follows (one of the variants):
containerettes: the slabs are piled up in the packs, which are packed into the film or other material;
on pallets: unpacked slabs are piled up on the pallets, which are entirely packed into the film or other material;
in containerettes on pallets: slabs are piled up in the packs, which are packed into the film or other material, then the packed packs are piled up on the pallets, which are entirely packed into the film or other material.
Each pack (containerette) on the greater surface is packed into the polyethylene film then is fused. The pallets and slabs piled up thereon or containerettes are wrapped with uniform packing material.
PACKING
TANK SLAbS ISOTEC Tank slab SW60
TECHNICAL CHARACTERISTICSISOTEC
Tank slab SW60ISOTEC
Tank slab SW80ISOTEC
Tank slab SR100
Density, kg/m3 60±10% 75±10% 90±10%
λ10, Вт/m·К 0,035 0,035 0,035
λ25, Вт/m·К 0,037 0,037 0,037
λ125, Вт/m·К 0,055 0,054 0,052
λ300, Вт/m·К 0,118 0,114 0,098
Fire hazard class КM0 КM0 КM0
Flammability group Noncombustible Noncombustible Noncombustible
Maximum operating temperature, °С 640 640 660
20 21
Stonewool products Technical insulation
Catalogue 2015www.isotecti.ru
iSOTeC industrial slab С100-50/Ч-600x1000 — Isotec trademark product, product name — industrial slab, thickness — 50 mm, produced in — Ч (Chelyabinsk), T (Tambov), product width — 600 mm, product length — 1000 mm.
ISOTEC Industrial slab S150
Dimensions, mm PackingCapacity in vehicle of 92 m3
Capacity in vehicle of 120 m3
length width thickness pcs m2 m3 packs m3 packs m3
ISOTEC Industrial slab S80 и ISOTEC Industrial slab S100
1 000 600 30 10 6 0,18 409 74 556 100
1 000 600 50 6 3,6 0,18 409 74 556 100
1 000 600 100 3 1,8 0,18 409 74 556 100
1 000 600 200 1 0,6 0,12 613 74 833 100
ISOTEC Industrial slab S150
1 000 600 30 6 3,6 0,11 681 74 926 100
1 000 600 50 4 2,4 0,12 613 74 833 100
1 000 600 100 2 1,2 0,12 613 74 833 100
1 000 600 170 2 1,2 0,20 361 74 490 100
ISOTEC Industrial slab S150 is used as heat insulation and fire protection of power and industrial equipment, as well as additional insulation (as the second layer) of industrial furnaces, steam boiles and other high temperature heat-generating equipment, smoke stacks, including sea vessels and floating structures.
EXAMPLE OF IDENTIFICATION MARK
разmерность в таблице указана выборочно
INDUSTRIAL SLAbS
Heat insulating mineral wool products rectangular in shape.
ISOTEC Industrial slab S80 is usedas heat insulation and fire protection of vertical walls of tanks, horizontal, vertical and inclined surfaces of equipment, also as heat insulation of rectangular ducts and big diameter pipelines, including sea vessels and floating constructions.
ISOTEC Industrial slab S100 is usedas heat insulation and fire protection of vertical tank roofs, technological equipment, heat exchangers, rectangular gas ducts, horizontal, vertical and inclined surfaces of equipment, including sea vessels and floating constructions.
The slabs can be packed as follows (one of the variants):
containerettes: the slabs are piled up in the packs, which are packed into the film or other material;
on pallets: unpacked slabs are piled up on the pallets, which are entirely packed into the film or other material;
in containerettes on pallets: slabs are piled up in the packs, which are packed into the film or other material, then the packed packs are piled up on the pallets, which
are entirely packed into the film or other material.
Each pack (containerette) on the greater surface is packed into the polyethylene film then is fused. The pallets and slabs piled up thereon or containerettes are wrapped with uniform packing material.
PACKING
ISOTEC Industrial slab S80
ISOTEC Industrial slab S100
TECHNICAL CHARACTERISTICSISOTEC
Industrial slab S80ISOTEC
Industrial slab S100ISOTEC
Industrial slab S150
Density, kg/m3 75±10% 90±10% 140±10%
λ10, Вт/m·К 0,035 0,035 0,037
λ25, Вт/m·К 0,037 0,037 0,039
λ125, Вт/m·К 0,054 0,052 0,053
λ300, Вт/m·К 0,114 0,098 0,093
Fire hazard class КM0 КM0 КM0
Flammability group Noncombustible Noncombustible Noncombustible
Maximum operating temperature, °С 640 680 680
APPLICATION
22 23
Stonewool products Technical insulation
Catalogue 2015www.isotecti.ru
ISOTEC Оз-30/Ч-600x1000 — ISOTEC trademark products, product name — fire protection slab, 30 mm thick, produced in — Ч (Chelyabinsk), T (Tambov), product width — 600 mm, product length — 1000 mm.
EXAMPLE OF IDENTIFICATION MARK
Dimensions, mm PackingCapacity in vehicle of 92 m3
length width thickness pcs m2 m3 packs m3
1000 600 30 10 6 0.180 409 74
1000 600 40 8 4.8 0.192 383 74
1000 600 50 6 3.6 0.180 409 74
1000 600 60 5 3 0.180 409 74
1000 600 70 4 2.4 0.168 438 74
1000 600 80 4 2.4 0.192 383 74
1000 600 90 3 1.8 0.162 454 74
1000 600 100 3 1.8 0.180 409 74
1000 600 110 3 1.8 0.198 372 74
1000 600 120 3 1.8 0.216 341 74
1000 600 130 2 1.2 0.156 472 74
1000 600 140 2 1.2 0.168 438 74
1000 600 150 2 1.2 0.180 409 74
1000 600 160 2 1.2 0.192 383 74
1000 600 170 2 1.2 0.204 361 74
1000 600 180 1 0.6 0.108 681 74
1000 600 190 1 0.6 0.114 646 74
1000 600 200 1 0.6 0.120 613 74
PACKING
The slabs can be packed as follows (one of the variants): containerettes: the slabs are piled up in the packs, which are packed into the shrinking film or other material;
in containerettes on pallets: the slabs are piled up in packs, which are packed into the film or other material, then the packed packs are piled up on the pallets, which are in one piece are packed into the film or other material.
FIRE pROTECTION SLAbS
Heat insulation and fire protection mineral wool products rectangular in shape and cross-section.
ISOTEC Fire Protect Concrete is used as heat insulation and fire protection of reinforced-concrete slabs of floor structures, columns, frame works in engineering and enclosing envelopes of buildings and constructions. The slab can withstand the compressive loads of up to 25kPa.
The material is attached to a reinforced-concrete hollow-core slab using anchoring fastening elements designed for attachment of fire protection slabs to enclosing envelops made of concrete and brick laying. During installation the length of the fixing element is selected based on the ISOTEC Fire Protection slab thickness. To ensure the persistence breakout force, all anchors (irrespective of length) have identical brace zone of not less than 50 mm long. After fastening, the fire protection material slabs may be coated with any nonflammable decorative coating.
ISOTEC Fire Protect Concrete
APPLICATION
ATTACHMENT
TECHNICAL CHARACTERISTICSISOTEC
Fire Protect Concrete
Density, kg/m3 110
Thickness, mm from 30 to 200
λ10, Вт/m·К 0,036
λ25, Вт/m·К 0,038
λ125, Вт/m·К 0,050
λ300, Вт/m·К 0,090
Fire hazard class КM0
Flammability group Noncombustible
FIRE RESISTANCE RATING OF THE ISOTEC FIRE PROTECT
CONCRETE- INSULATED FLOOR STRUCTURE SLAB IS REI 240.
25
Technical insulation
24 Catalogue 2015www.isotecti.ru
LOW SPECIFIC DENSITY
EASY INSTALLATION — MATERIAL IS EASILY CUT, CARRIED OVER AND INSTALLED
TEL - TEChNOLOGy GLASSwOOL pRODUCTION
Laminating Cutting Packing
Raw materials preparation
Toбавки Песок
Melting furnace
Fiberization unit
Addition of bonding agent
PolymerizationENVIRONMENTALLY SAFE
COST-EFFECTIVESOLUTIONS
TRANSPORTATION AND STORAGE PLACE SAVING DUE TO HIGH MATERIAL PACKING COMPRESSION
Glasswool products have the minimum weight and are used at temperatures of up to 350°С.
GLASSwOOLpRODUCTS
EXCELLENT HEAT INSULATION
MATERIAL HIGH ELASTICITY AND SPRING POWER
EFFICIENT АЯ SOUND INSULATION
27
Technical insulation
26
Glasswool products
Catalogue 2015www.isotecti.ru
1) For fire hazard class and flammability group - the fire hazard class and flammability class are specified for a product without coating, after slash the class (group) is specified for a product with coating AL (aluminium armoured foil with thickness of up to 20 µm), Т (glass cloth).
2) For foil-coated products the maximum surface temperature is - 100 “С.
Dimensions, mm Packing, 1шт. Number on a palletCapacity in vehicle of 92 m3
Capacity in vehicle of 120 m3
length width thickness m2 m3 pcs m2 m3 паллет m3 паллет m3
ISOTEC Mat
8 000 1 200 30 9,6 0,29 20 192 5,76 20 115,2 24 138,2
6 000 1 200 40 7,2 0,29 20 144 5,76 20 115,2 24 138,2
5 000 1 200 50 6 0,30 20 120 6,00 20 120,0 24 144,0
4 200 1 200 60 5,04 0,30 20 100,8 6,05 20 121,0 24 145,2
4 000 1 200 70 4,8 0,34 20 96 6,72 20 134,4 24 161,3
4 000 1 200 80 4,8 0,38 20 96 7,68 20 153,6 24 184,3
4 000 1 200 90 4,8 0,43 20 96 8,64 20 172,8 24 207,4
4 000 1 200 100 4,8 0,48 20 96 9,60 20 192,0 24 230,4
ISOTEC Mat Light
12 000 1 200 40 14,4 0,58 20 288 11,52 20 230,4 24 276,5
11 000 1 200 50 13,2 0,66 20 264 13,20 20 264,0 24 316,8
9 200 1 200 60 11,04 0,66 20 220,8 13,25 20 265,0 24 318,0
8 200 1 200 70 9,84 0,69 20 196,8 13,78 20 275,5 24 330,6
7 300 1 200 80 8,76 0,70 20 175,2 14,02 20 280,3 24 336,4
6 600 1 200 90 7,92 0,71 20 158,4 14,26 20 285,1 24 342,1
6 000 1 200 100 7,2 0,72 20 144 14,40 20 288,0 24 345,6
ISOTEC Flex
12 500 1 200 50 15 0,75 25 375 18,75 20 375,0 24 450,0
6 250 1 200 100 7,5 0,75 25 187,5 18,75 20 375,0 24 450,0
ISOTEC Flex
TECHNICAL CHARACTERISTICSISOTEC
MatISOTEC
Mat LightISOTEC
Flex
Thickness, mm from 30 to 35 from 35 to 45 from 45 to 150 from 30 to 200 from 30 to 240
Density, kg/m3 30±10% 24±10% 22±10% 12±10% 11±10%
λ10, Вт/m·К 0,036 0,039 0,041
λ25, Вт/m·К 0,039 0,042 0,044
λ125, Вт/m·К 0,066 0,072 0,075
Fire hazard class КМ0 / КМ11) КМ0 / КМ11) КМ0 / КМ11)
Flammability groupNoncombustible,
Combustible1)Noncombustible,
Combustible1)Noncombustible,
Combustible1)
Maximum operating temperature, °С 3002) 2502) 2502)
Unstressed heat insulation-sound proofing of constructions, equipment and pipelines.
Light fiberglass ISOTEC Mat mats are made according to the patented TEL technology. These mats are the most preferable material for the heat insulation-sound proofing.
An ordinary mat having mainly lengthwise pointing of fibres, when installed, fits loosely to the convoluted surface forming calender cuts, which can be removed by additional contraction and reduction of the mat thickness only. This disadvantage results in the necessity to increase effective thickness of the insulation.
Flexible fibered heat insulating glasswool products, which can be coated with aluminium foil and glass-fibre mat (ISOTEC Mat Light), supplied rolled in the rolls.
MATS ISOTEC Mat
APPLICATION
iSOTeC Mат-АЛ-50/Е-1200х5000 — ISOTEC trademark product, product name— mat, product design variant — aluminium foil-coated , thickness — 50 mm, produced in E — Egorievsk, product width — 1200 mm, product length — 5000 mm.
ISOTEC Mat Light
EXAMPLE OF IDENTIFICATION MARK
PACKING
Mats are packed off and rolled in the rolls. Each roll along its cylindrical surface is packed into the polyethylene film, then the polyethylene film edge is glued and fused. The containerettes are collected in a “module” packing, the “modules” are packed in a “multipack” packing .
The “multipack” packing is a block including a certain number of the “modules” piled up on a pallet and wrapped up with uniform packing material, pointed in a manner specified by the manufacturer.
ISOTEC Mat are deprived of this disadvantage, they have corrugated, mainly vertical pointing of the fibre and therefore are easily bent. When installed on a convoluted surface, the ISOTEC Mat material does not form calender cuts and air pockets fitting closely to pipe the surface and practically fully maintaining the declared thickness.
This is one of the basic advantages of ISOTEC Mat, which makes these materials identical to significantly more expensive plate mats.
28 29
Glasswool products Technical insulation
Catalogue 2015www.isotecti.ru
APPLICATION
Heat insulating glasswool products rectangular in shape and cross-section. ISOTEC Tank slab GW40 may come with glass-fibre mat coating.
Heat sound insulation of the process equipment (including ventilation systems, water, oil and petroleum product storage tanks), including for insulation of convoluted surfaces of over 250 mm in radius.
Heat sound insulation of air ducts and pipelines of rectangular or circular section large in diameter. Insulation of structure members and equipment of sea vessels and floating structures.
iSOTeC tank slab ГВ40-Т-50/E-1200x1200 – ISOTEC trademark product, product name – tank slab, product design variant – with glass cloth coating, thickness – 50 mm, produced in E – Egorievsk, product width – 1200 mm, product length – 1200 mm.
ISOTEC Tank slab GW40
ISOTEC Tank slab GR70
TECHNICAL CHARACTERISTICSISOTEC
Industrial slab G40ISOTEC
Tank slab GW40ISOTEC
Tank slab GR70
Thickness, mm from 50 to 140 from 50 to 150 from 30 to 60 incl. from 60 to 200
Density, kg/m3 50 33÷44 65÷90 50÷70
λ10, Вт/m·К 0,035 0,035 0,037
λ25, Вт/m·К 0,037 0,037 0,039
λ125, Вт/m·К 0,052 0,052 0,053
λ300, Вт/m·К 0,115 0,115 0,098
Fire hazard class КM0 / КM11) КM0 / КM11) КM0
Flammability groupNoncombustible,
Combustible1)Noncombustible,
Combustible1) Noncombustible
Maximum operating temperature, °С 350 350 540
1) For fire hazard class and flammability group - the fire hazard class and flammability class are specified for a product without coating, after slash the class (group) is specified for a product with coating T (glass cloth).
EXAMPLE OF IDENTIFICATION MARK
PACKING
The slabs can be packed as follows(one of the variants):containerettes: slabs are piled up in the packs;on pallets: slabs are piled up on the pallets;in containerettes on pallets: the slabs are piled up in the packs, the packs are piled up on the pallets.
Dimensions, mm PackingCapacity in vehicle of 92 m3
length width thickness pcs m2 m3 packs m3
1200 1200 50 6 8,6 0,43 176 49
1200 1200 100 3 4,3 0,43 176 76
1200 1200 140 2 2,8 0,40 198 80
ISOTEC Industrial slab G40
ISOTEC HVAC Slab
APPLICATION
PACKING
Heat insulating glasswool products rectangular in shape. Come glass cloth-coated.
Heat sound insulation in the ventilation systems (including in attenuators of the noise emitted by ventilation and air-conditioning systems), in household, industrial and process equipment.
As sound-absorbing materials of pipe-like and plate-like mufflers.
As indoor sound-absorbing materials, sound absorbent linings and sound shields, including for creation of friendly acoustics in cinemas and concert halls.
Insulation of structure members and equipment of sea vessels and floating structures.
The packaging technology is as the same as for slabs ISOTEC Tank slab GW40 and Tank slab GR70
Dimensions, mm PackingCapacity in vehicle of 92 m3
length width thickness pcs m2 m3 packs m3
1 600 1 200 30 10 19,0 0,58 176 76
1 200 1 200 50 6 8,6 0,43 176 76
1 200 1 200 100 3 4,3 0,43 176 76
iSOTeC T-50/e-1200x1200 — ISOTEC trademark product, product name – ventilation slab, product design variant - glass cloth-coated, thickness - 50 mm, produced in E - Egorievsk, product width - 1200 mm, product length - 1200 mm.
EXAMPLE OF IDENTIFICATION MARK
SLAbS
TECHNICAL CHARACTERISTICSISOTEC
HVAC Slab
Thickness, mm from 0 to 100 incl. from 100 to 150
Density, kg/m3 45÷55 36÷44
λ10, Вт/m·К 0,032
λ25, Вт/m·К 0,035
λ125, Вт/m·К 0,048
λ300, Вт/m·К 0,080
Fire hazard class КM0 / КM11)
Flammability group Noncombustible, Combustible1)
Maximum operating temperature, °С 5401) For fire hazard class and flammability group - the fire hazard class and flammability class are specified for a product without coating, after slash the class (group) is specified for a product with T (glass cloth) coating.
125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz
ISOTEC HVAC Slab-T-30 0,08 0,16 0,33 0,70 0,97 0,96
ISOTEC HVAC Slab-T-50 0,15 0,30 0,72 0,91 0,96 0,97
ISOTEC HVAC Slab-T-100 0,43 0,69 0,90 0,90 0,97 0,99
SOUND-ABSORPTION FACTOR OF ISOTEC HEAT INSULATION MATERIALS HVAC SLAB
AT THE GEOMETRIC MEAN FREQUENCIES OF OCTAVE BANDS
30
Glasswool products
Catalogue 2015www.isotecti.ru
ISOTEC М-25 is developed as inexpensive material with high density for heat insulation of pipelines and air ducts, and for unstressed heat insulation of industrial equipment.
ISOTEC M-25
Flexible fibered heat insulating glasswool products manufactured in accordance with GOST 10499-95. May come armoured aluminium foil-coated (ALI).
APPLICATION
iSOTeC M-25-АЛ1-12000-1200-30 GOST 10499-95 – ISOTEC trademark products, product name – М-25, product design variant – aluminium foil-coated , product length - 12500 mm, product width – 1200 mm, thickness 30 mm, manufactured as per GOST 10499-95.
EXAMPLE OF IDENTIFICATION MARK
TECHNICAL CHARACTERISTICSISOTEC
M-25
Thickness, mm from 30 to 100
Density, kg/m3 21÷29
λ10, Вт/m·К 0,034
λ25, Вт/m·К 0,036
Fire hazard class КM0
Flammability group Noncombustible/Combustible
Maximum operating temperature, °С 2501)
PACKING
The packaging technology is as the same as for ISOTEC Mat, Mat Light and Flex.
Dimensions, mm PackingCapacity in vehicle of 92 m3
length width thickness pcs m2 m3 packs m3
12 000 1200 30 1 14,4 0,43 20 377,2
10 000 1200 40 1 12,0 0,48 20 377,2
7 200 1200 50 1 8,64 0,43 20 377,2
6 000 1200 60 1 7,2 0,43 20 377,2
5 200 1200 70 1 6,24 0,44 20 377,2
4 500 1200 80 1 5,4 0,43 20 377,2
4 500 1200 90 1 5,4 0,49 20 377,2
4 000 1200 100 1 4,8 0,43 20 377,2
1) For foil-coated products the maximum surface temperature is - 100 “С.
Khokhryakova str., 10, of. 502
EKATERINBURG 620014
Tel. +7 343 344 37 33
N. Ershova str., 1a
KAZAN 420107
Tel. +7 917 232 8419
10-th Krasnoarmeyskaya str., 22, letter а, 4-th floor
SAINT-PETERSBURG 190103
Tel. +7 812 332 56 60
The technical information resulted in this brochure is actual at the time of its issue (01.2015). Our production operations are continuously modernized. Please make sure that you use the most current version of the brochure. Pay attention that the scopes of product use are given for your notice. Before use, you should make sure once again that the products chosen can be used in the respective area. You can always receive the further information in the nearest Isotec office in your location.
Elektrozavodskaya str., 24, of. 208
MOSCOW 107023
Tel. +7 495 775 15 10
Narymskaya srt., 27, floor 12
NOVOSIBIRSK 630132
Tel. +7 383 363 07 12
www.isotecti.ru
Top Related