UK street furniture designers & manufacturers
Street Designestablished in 1986
As UK based, designers and manufacturers,Street Design can manufacture and supplyHalston, tapered planters to order.Choose the plan sizes of the planters.Choose from a range of material and finishes.Choose from a range of accessories to ensurethat the Halston planter is manufactured to suityour specific scheme.
1800x1800x485mm high Halston tapered planter, with wide bench top, in natural finish FSC iroko hardwood with dull polishedstainless steel corners
Halston planter product details
Halston planter product specification
Halston planter material finishes
Halston planter accessories
Halston planter material specification
Halston planters are suitable for:
planters with seatinglarge plantersfeature plantersmoveable planters
Watering system accessories
Adjustable feet accessory
LED Lighting accessories
HALSTON planter
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Ref: 01/AHalston planter care and maintenance
The Halston external planter, is a multi-use timberand metal planter, available in a choice ofmaterials and finishes to suit your scheme andbudget.The planter is available in either FSC irokohardwood or a FSC treated European, joineryquality redwood. Planters up to 2.8x2.8m plansize will be delivered fully assembled ready forplanting.Larger planters will be manufactured in sectionsand delivered for assembly on site.Planters can be manufactured with additionalsteel support to enable the planters to be movedwhen fully planted.
Construction
HALSTON planter
PRODUCT DETAILS
General
Section thro’ planter
The Halston, timber and metal planter, isconstructed by bolting horizontal timber boards tofolded metal, external posts.The horizontal timber wall boards will be FSC195x45mm section treated redwood or irokohardwood.The horizontal timber top boards will be FSC195x45mm section treated redwood or irokohardwood. The top boards will be supported byinternal, galvanised mild steel brackets.The folded metal corners will be either 3mm thick,
Key
a - 195 x 45mm FSC horizontal timber wall slats
c - 100 x 47mm sawn FSC timber base bearersd - 100 x 47mm sawn FSC timber cross bearerse - 18mm FSC treated Eucalyptus plywoodf -g -h -
b - 195 x 45mm FSC horizontal timber top slats
18mm FSC treated plywood cover stripGeotextile membrane filter lining50mm high FSC timber blocks
i - Folded metal corner post
folded mild steel or stainless steel.The internal base is constructed using 100x47mm sawntreated softwood bearers, fixed to the posts and fitted tojoist hangers fixed to the main bearers. Treated plywoodsheeting is fixed down onto the bearers.50mm high timber blocks are fitted to the underside ofthe bearers, to ensure that the load is safely transferredto the ground.When fully constructed, the inside of the planter is fullylined with a geotextile lining, that allows water to drainthrough whilst retaining the soil fines.
f
h
ea a
aa c d
b
i
b
g
h
c
i
i i
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Ref: 10/A
PRODUCT SPECIFICATION
All Street Design products are designedand manufactured using only quality,durable materials, construction details andfixings, to provide a long-lasting, durablelife expectancy.
Timber policyAll treated softwood planters are manufactured using materials obtained from growers whooperate under the Forest Stewardship Council (FSC).All iroko hardwood planters are manufactured using materials obtained from growers whooperate under the Forest Stewardship Council (FSC).
Halston planter in FSC natural irokoand stainless steel
Large FSC natural treatedsoftwood planters
Construction
Assembly
Materials
Standard finish
Optional finish
Options
Accessories
If required, timber planters can besupplied with a stained finish using 3coats of quick drying water based woodstain, to the colour of you choice.Material samples available on request.
FSC treated softwood and iroko hardwoodwill be left natural to reduce the need forre-staining and help reduce maintenancecosts.
Hardwood planters are constructed fromFSC iroko hardwood, from sustainablesources. Softwood planters areconstructed using FSC European redwoodthat has been Wolmanit CX treated, for adesired service life of 30 years minimum.All mild steel fixings will be M10 size andhave a bright zinc plated finish.Planters will be fitted with a geotextile filterfabric lining, which allows the water todrain through the planter, while retainingthe fill material.
Planters up to 2.8 x 2.8m will be deliveredto site fully assembled for off loading andpositioning on site. Planters larger than2.8m will be supplied in sections forbolting together on site.
Halston planters are manufactured toorder.Before we can manufacture the planters,we need to know the following:• plan size and shape• material• finish• details of accessories required
To enhance your Halston planter andcreate a product that is suitable for yourspecific application, you can add from arange of planter accessories.
Adjustable feetWatering system
Internal steel frame (moveable planters)Base skirting
••• LED lighting••• Pergola structures• Trellis panels• Plaques
HALSTON planterStreet Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Ref: 11/A
HALSTON planter
Halston planters can be manufactured andsupplied to include a range of optionalaccessories. Planters can incorporate; adjustablefeet, tree anchor fittings, steel bases, baseskirtings, watering systems, inner tower planters,LED lighting, pergolas and trellis panels.
Adjustable feet
Watering system
Moveable planters
Halston planters can be supplied with an internalsteel base frame to allow the planters to bemoved whilst fully planted. The steel frameprovides additional strength and ensures suitablesupports for the forklift tines.
M30 adjustable feet
ACCESSORIES
Planters with optional Mona watering system
Pergola structures and trellis panels
Pergola structures and trellis panels can beintegrated into the planter construction. Pergolasand trellis allow high level planting and createshading for seating areas.
Integral wide bench top
Halston planter has wide timber bench top onall sides
LED lighting
Both white and coloured LED lighting can beincluded in the manufacture of the Halstonplanter. Lighting can be incorporated into thesides or the base of the planter. It can be utilisedto illuminate the planting or the area around theplanter.See separate page for LED Lighting details.
White LED ‘plant‘ lighting
Green LED ‘plinth‘ lighting
Green LED ‘side (slot)‘ lighting
As standard the Halston planter incorporates a195mm wide timber top. The wide top timber canbe used for informal seating.
Anti-skateboarding fittings
If required galvanised mild steel or dull polishedstainless steel anti-skateboarding fittings can befactory fitted to the wide bench top to helpprevent damage to the outside edge of the timebrtop.
Halston planters can be manufactured withoptional adjustable feet to allow the planter to beheight adjusted to ensure that the top of theplanter is level. The adjustable feet, allow theplanter to be levelled after relocation.See separate page for Adjustable Feet details.
Halston planters can be supplied with a choice of2 watering systems. Street Design can supplyeither a reservoir system, with filler pipe or theMona, subterranean tank system.See separate page for Watering System details.
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Ref: 20/A
HALSTON planter
WATERING SYSTEMS
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Watering System 1 - Street Design reservoir system
The Street Design watering accessory is areservoir system with hydroleca sacks, thatmaximises the available water.
The system ensures the optimum use of thewater and nutrients, delivering the maximumquantity directly to the roots of the plants,resulting in improved root development andoptimal plant growth.
300 micronpolythene liner
Section thro’ planterwith Watering System 1
Watering System 2 - MONA subterranean tank system
Planter ready for soil and planting
Water storage tanks and filler pipe
Completed planter
Mona watering systemFactory fitted into planter / tree container
For full details visit: www.green-tech.co.uk
The Mona Plant System (MPS) is an advanced, wellproven and easy to use subterranean irrigationsystem. It is the cost effective and environmentallyfriendly solution for both interior and exteriorlandscaping.
The Mona Plant System ensures that the water andnutrients are delivered in the right quantity to theroot of the plants, resulting in improved rootdevelopment and optimal plant growth.
General
Factory installation
All necessary water tanks, pipes, end caps and airpipes with level indicator, are factory fitted into theplanters / tree containers, prior to delivery.
Ensure that the distance between the top of the linktank and the lowest part of the root does not exceed150mm.
Filling planters
The system consists of storage tanks, flexible linkingpipes and a flexible filler pipe with filler pipe cap.The system delivers water directly to the roots viacapillary action, eliminating water wastage. Thisencourages deep root growth, improving long termdrought resistance. The cap and lid provides aneasy access point for watering and soluble fertiliserapplication.Installation
General
The system consists of a 300 micron thick blackpolythene liner, hydroleca (pulverised ashgranules) sacks and a rigid plastic filler pipe.
The system delivers water directly to the roots via50mm diameter, rigid plastic pipe, eliminatingwater wastage. This encourages deep rootgrowth, improving long term drought resistance.The high level filler pipe provides an easy accesspoint for watering and soluble fertiliserapplication.
Planters are supplied with the Water System 1already installed.
Ensure the hydroleca sacks are in the correctposition. They will move during transportation.Check that all the plastic pipe connections areproperly fitted. The planter is ready for drainagematerial, filling and planting.
hydroleca sacks
50m
m Ø
fill
er
pip
e
Polythene liner with filler pipe
Hydroleca sacks laid out in base of planter
Ref: 21/A
HALSTON planter
ADJUSTABLE FEET
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
General details
The M30 adjustable foot with swivel base, is screwed into adjustablefoot mounting plate.The mild steel mounting plate with adjustable foot housing, is fixed tothe underside of the planter base.A M30 hex full nut is welded to the underside of the mounting plate.The adjustable foot is adjusted with a 26mm wrench.
M30 adjustable foot withswivel base.The base diameter is122mm.
The swivel base canadjust to allow forsloping ground with afall of up to 1 in 2.06(26°).
For extra security, it ispossible to drill and boltthrough the base of theadjustable feet.
As an extra cost option, Street Design planterscan be supplied with adjustable feet. They allowthe planter to be levelled, before filling andplanting.Adjustable feet are particularly useful if theplanters are likely to be relocated to a newposition.The adjustable foot screw fits into a hex nut,located on the underside of the planter base.
Specification
Adjustable Foot Mounting Plate
Adjustable Foot
Fitting and adjustment
M30 hex full nut
base bearer
adjustable foot housing
Swivel base
Bolt down base
Base diameter
Ref: 22/A
The adjustable foot comprises of a M30 Øthreaded bar, with spherical end section, pressfitted into a black reinforced polyamide base.The swivel base can tilt through
The threaded bar is BZP (bright zinc plated)treated.
360º toaccommodate sloping ground levels.
HALSTON planter
LED LIGHTING
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Halston planters can be manufactured andsupplied to include plinth, side and top lighting, allspecified to illuminate the planter or thesurrounding paving.Plant, up lighting and down lighting can be usedto create a dramatic planting scheme byintroducing colours or feature spot lighting.We have created seven types of basic lighting toenhance your scheme and the planting. Theseven types of lighting are shown below. Thelighting types can be specified individually or theycan be grouped together to create a range oflighting effects.In its basic form, the lighting is available as coolwhite, warm white, blue, green or red LED units.More complex lighting can be supplied, includingtwilight switches, PIR sensors, timers, infrared,ultraviolet and royal blue emitters, PWMdimmers, RGB, UPS, DMX and remote controlunits.
Side lighting - holes aremanufactured into the sidewalls of the planter to allowthe LED lighting to create adecorative feature to the sidesof the planter
Plinth lighting - LED lighting is fitted to the inside of the planter,located under the base floor, offering a pool of light around thebottom of the planter.
Street Design is pleased to announce newdesigns of wood and metal planters featuringintegrated lighting as standard. These designsmake full use of safe, eco-friendly, low-power,low-voltage, high-efficiency LED lighting with abroad choice of placements, brightness andcolours.Our LED lighting units can handle all of the tasksformerly undertaken by tungsten, halide andfluorescent lamps, and out-perform them in everydepartment. They are extremely flexible - we cansupply almost any configuration of lighting to aclient's specification using our standard lightingunits in these purpose-designed planters.The lighting units can be powered by either a lowvoltage DC supply or mains electricity. The choiceof light levels and power units is also broad. Ourstandard power supply pumps out 12 Volts at 4Amps, in LED terms enough for a very brightplanter. The entire range is from 1 Watt to 1,000Watts.This page outlines the different types of lightingavailable and shows examples of the uses towhich the lighting units can be put.
Overview
Plant lighting - LED lights aresupplied to illuminate andmake features of the planting
Plinth lighting is available in warmand cool white, standard LEDcolours, and RGB strips that allowalmost any colour to be mixed.Plinth lighting can also bespecified for one or more sides(or arcs) of a planter and at anypower level between 1 Watt permetre and 40 Watts per metre.Our standard plinth light is warmwhite and operates at 6 Watts permetre and provides a noticeablelight up to one metre from theedge of the planter (though thisdepends on ambient lightinglevels and the reflectivity of theground surface).
Plinth lighting
Side lighting
Side lighting is offered as feature,decorative lighting from cut-outsin the horizontal timber slats. Lowpowered LED ribbons provide apoint of interest on these planters.These lamps are very noticeableeven under extremely brightconditions, and are quite dazzlingat night.
Plant lighting
The plant lighting array ispositioned down at planting level.Four LED lighting battens arefixed to the inside edges at thetop of the planter. The lights areangled up and illuminate theunderside of the flora, a strikingand unusual effect. Fortunately,the plants don't seem to mind.
Spotlights fitted within the plantercan be angled up to illuminatelarge plants, bushes and treesseveral metres above the plantersurface. LED emitters rated at 1,3 or 5 Watts are equipped with 5,15, 25 or 45 degree collimatinglenses to send a narrow beam ofwhite or coloured light toilluminate the chosen feature highabove the planter. The layout ofthe planting can conceal the lightsources to enhance the effect.
Down Lighting in this context isabout mounting a lamp with alens and reflector above theplanting area to provide top-downillumination. The reflectors comein different shapes and sizes tomatch the light distribution to theshape of the planter. Theproximity of the light source andthe use of an opaque reflectorminimises both the powerrequirements and the unwanted,upward, light pollution.
Up Lighting
Down Lighting
Up lighting - LED up lighting isfitted to the inside top of theplanter, creating a rim of lightbetween the planting and theplanter
Down lighting - An LED light ispole mounted in the centre ofthe planter, illuminating thecomplete planter top andplanting. Depending on theheight, the surroundingground can be illuminated ifrequired.
Ref: 23/A
MATERIAL FINISHES
FSC treated redwood with a natural finish
FSC treated redwood standard finish
As standard, all FSC treated redwood planterswill be supplied with a natural finish. Thepreservative treatment process will colour thetimber a light brown/green.
FSC treated redwood wood optional finish
As an optional extra, the FSC treated redwoodcan be supplied with a stained finish. This will beapplied after the timber treatment process. Thestandard stain will be 3 coats of Ronseal quickdrying water based stain. The standard colour willbe teak. Other stains and colours can be appliedupon request. As part of the future maintenance,all stained products will require additionalstaining. The frequency of re-staining will dependon the location, use and the effects of weatheringand traffic film.The products should be cleaned down, verylightly sanded and re-coated with the originalstain.
FSC iroko hardwood standard finish
As standard, all FSC iroko hardwood planters willbe supplied with a natural finish. Due to thenature of the material and the density of thegrain, iroko hardwood is not capable of taking apreservative treatment. Iroko hardwood is anaturally durable material, giving a lifeexpectancy in excess of a treated softwood.
FSC iroko hardwood optional finish
As an optional extra, the FSC iroko hardwoodplanters can be supplied with a stained finish.The standard stain will be 3 coats of Ronsealquick drying water based stain. The standardcolour will be teak. Other stains and colours canbe applied upon request.As part of the future maintenance, all stainedproducts will require additional staining. Thefrequency of re-staining will depend on thelocation, use and the effects of weathering andtraffic film. The products should be cleaned down,very lightly sanded and re-coated with the originalstain.
FSC iroko hardwood with a natural finish
Aged natural treated redwood
Left to weather naturally, the timber willeventually turn a silver grey colour.
FSC treated redwood with anoptional teak stained finish
FSC iroko hardwood with anoptional teak stained finish
Aged natural iroko hardwood
Left to weather naturally, the timber willeventually turn a silver grey colour.
Standard finish Optional finish at extra cost
HALSTON planter
Mild steel standard finish
After folding and punching, the tapered mild steelexternal posts will be hot dip galvanised. Thegalvanised straps will require no furthermaintenance.
Mild steel optional finish
After fabrication and hot dip galvanising,can be polyester
powder coated. They can be powder coated toany RAL colour depending on product quantityand stock levels of powder colours.Depending on stock levels the powders areavailable in 3 gloss levels; gloss, satin and matt.
thetapered mild steel external posts
Tapered mild steel planters leg,polyester powder coated RAL 9005with a satin gloss level
Stainless steel standard finish
After folding and punching, the tapered stainlesssteel external posts
strapswill be dull polished. The
stainless steel will require no furthermaintenance.
Street Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Ref: 30/A
Optional planter accessories continued
Tapered external corner posts
Horizontal timber boards
Horizontal timber top boards
Internal steel support brackets
Base bearers
Base floor
Internal lining
Fixing bolts
Joist hangers
Folded and welded 3mm thick mild or stainlesssteel.
FSC 195x45mm FIN PAR Wolmanit CX treatedEuropean redwood or iroko hardwood.
FSC 195x45mm FIN PAR Wolmanit CX treatedEuropean redwood or iroko hardwood.
Fabricated, fully welded mild steel, top timberboard support brackets. The support brackets willbe hot dip galvanised after fabrication.
FSC 100x47mm section sawn, Wolmanit CXtreated European redwood.
18mm FSC Eucalyptus treated plywood.
Geotextile membrane.
M10x65mm mild steel coach bolts with a BZPfinish or M10x65mm A1 stainless steel coachbolts.
LUS/230/50 U sheer light nailing hangers with aBZP finish.
General specification
Construction
Assembly
Timber policy
Materials
Finishes
All Street Design products are designed and manufactured using only quality,durable materials, construction details and fixings, to provide along-lasting, durable life expectancy.
planters up to 2.8 x 2.8m will be delivered to site fully assembled for offloading and positioning on site. Planters larger than 2.8m will be supplied insections for bolting together on site.
All treated softwood products are manufactured using materials obtained fromgrowers who operate under the Forest Stewardship Council (FSC).All iroko hardwood products are manufactured using materials obtained fromgrowers who operate under the Forest Stewardship Council (FSC).
FSC treated softwood and iroko hardwood will be left natural to reduce the needfor re-staining and help reduce maintenance costs. If required, timber planters canbe supplied with a stained finish using 3 coats of quick drying water based woodstain, to the colour of your choice.Mild steel components will be left with a galvanised finish only. If required, after hotdip galvanising, the mild steel components can be polyester powder coated, to thecolour of your choice. The galvanised parts are prepped, treated and sprayed withthe polyester powder, before being baked in an oven.Stainless steel components will have a brushed finish. If required, the stainlesssteel components can be supplied with a mirror polished or bead blasted finish.
Halston
Hardwood products are constructed using FSC iroko hardwood, from sustainablesources. Softwood products are constructed using FSC European redwood thathas been Wolmanit CX treated, for a desired service life of 30 years minimum.All mild steel fabricated components will be hot dip galvanised after fabrication toBS EN ISO 1461:2009.All stainless steel fabricated components will be grade 304. Grade 316 can bespecified if the location or project requires it.All mild steel fixings will be bright zinc plated, and all stainless steel fixings will beA2 (grade 304). A4 (grade 316) can be specified if the location or projectrequires it.Planters will be fitted with a geotextile filter fabric lining, which allows the water todrain through the planter, while retaining the fill material.
Guarantee
All planters are guaranteed for 15 yearsminimum. This guarantee is a minimum and isdependant on the product not being misused orabused. All the materials, treatments andconstruction will allow for a life expectancyconsiderably longer than this.
Product prices
See separate price list for the product prices ofstandard sizes, materials and finishes.
MATERIAL SPECIFICATION
Standard planter
Optional planter accessories
Adjustable feet
Tree anchors
Watering system
Base skirting
M30 adjustable feet with swivel base. SeeAdjustable Foot page for full details.
25x5mm mild steel flat, hot dip galvanised.
Choose either the Street Design reservoir systemor the Mona tank system. See Watering Systempage for full details.
12mm thick Marine grade plywood boards, screwfixed to blocks fixed to the underside of theplanter.
Moveable planters
Pergola structures
Trellis panels
Inner tower planters
LED lighting
Material samples
Halston planters will be manufactured with aninternal mild steel frame.
Pergola structures can be manufactured as anintegral part of the planter construction. Thecorner post can be extended to carry the upperhorizontal 145x45mm section timber bearers andcross bearers.
Trellis panels can be manufactured as an integralpart of the planter construction. The corner postcan be extended to carry the horizontal andvertical trellis timber slats.
Halston planters can be supplied with co-ordinating inner tower planters to create featureplanting or tiered planting.
The lighting is available as cool white, warmwhite, blue, green or red LED units. Morecomplex lighting can be supplied, includingtwilight switches, PIR sensors, timers, infrared,ultraviolet and royal blue emitters, PWMdimmers, RGB, UPS, DMX and remote controlunits.
Material samples are available on request.
HALSTON planterStreet Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Ref: 40/A
CARE & MAINTENANCE
Natural finish treated redwood can be washed down with a mild detergent.More stubborn surface marks can be removed with a light, hand sand with a120 grit, or higher grade sandpaper. Excessive sanding should be avoided.
Maintaining the optional FSC treated redwood finish
Stained, treated redwood will need to be re-coated after a period of time.The stain can either start to fade, become dull (oxidised) or incur somesurface break up. Lightly sand down the timber using a 120 grit, or highergrade sandpaper. We recommend that the timber is re-stained with theoriginal stain colour and manufacturer. Details can be obtained from Streetdesign Limited. Apply the stain evenly, with brush strokes running parallelwith the woodgrain, in thin layers, building up the finish as recommended bythe stain manufacturer.
Maintaining the standard stainless steel finish
Dull polished (brushed) stainless steel should be washed down with clean,warm water with a mild detergent. More severe marks can be removed by usinga fine abrasive, such as a Scotchbrite or stainless steel scouring pad. As dullpolishing is a process of applying fine linear scratches evenly over the surface,it is extremely important that rubbing down with a abrasive pad is done carefullyin a straight line parallel to the existing grained finish. Rust marks or stains areusually caused by environmental contamination from dissimilar materials laidagainst, or near to, the stainless steel. These stains can be removed asdescribed above.
Maintaining the standard FSC treated redwood finish Maintaining the standard mild steel finish
Maintaining the optional mild steel finish
Hot dip galvanised mild steel is a very durable and hard wearing finish. Dirt canbe washed off with warm water and a mild detergent. Always use clean waterand cleaning cloths to avoid surface contamination.After cleaning, any severe marks can be over painted with a cold galvanised,(zinc rich) aerosol spray.
Polyester powder coated finishes should be washed down with clean warmwater and a mild detergent. Minor touching up can be done with an aerosol tomatch the original powder coated colour. Details can be obtained from StreetDesign Limited. More severe damage can be repaired by sanding down, bymanual or mechanical means, beyond the damaged area, sufficiently far as toensure that any step in the powder coated finish is removed. This will ensurethat after re-finishing the repair will be difficult to detect.
General
Maintaining the optional FSC iroko hardwood finish
Maintaining the standard FSC iroko hardwood finish
All Halston planter products are manufactured using quality materials, treatments and finishes.The timber slats are manufactured from either FSC treated redwood or FSC iroko hardwood. The mildsteel will be hot dip galvanised after fabrication. The stainless steel will be supplied with a dull polished(brushed) finish. All products require a varied amount of maintenance, depending on the environment,usage and weather conditions. Natural timber, galvanised steel and stainless steel will only requirecleaning. In time, stained timber will require re-coating.
Natural finish iroko hardwood can be washed down with a mild detergent.
More stubborn surface marks can be removed with a light, hand sand with a
120 grit, or higher grade sandpaper. Excessive sanding should be avoided.
Stained, iroko hardwood will need to be re-coated after a period of time. Thestain can either start to fade, become dull (oxidised) or incur some surfacebreak up. Lightly sand down the timber using a 120 grit, or higher gradesandpaper. We recommend that the timber is re-stained with the originalstain colour and manufacturer. Details can be obtained from Street designLimited. Apply the stain evenly, with brush strokes running parallel with thewoodgrain, in thin layers, building up the finish as recommended by the stainmanufacturer.
HALSTON planterStreet Design LimitedUnit 47Hayhill Industrial EstateBarrow upon SoarLeicestershire LE12 8LD
Contact us:Telephone:Fax:Email:Web site:
01509 81533501509 [email protected]
Ref: 50/A
Top Related