a 2K Epoxy and Urethane Formulations a Superior Corrosion Protection Compared To Water-Borne a The Only 2K Solvent-Borne Dry-Fall Coatings Available a High Gloss Finishes a High Temperature Formulations
a Ambient to 1500°F Formulations Available a Higher Film Builds Than The Competition a Hot Application Up To 750°F a Custom Color Stability Up To 1000°F a No Complicated Cure Schedules
a Suitable For Extreme Chemical Exposure a Withstands Temperatures Up To 450°F a No Plural Component Equipment Needed a Longer Potlife Than The Competition a In-Situ Formulations Available
a Superior Thermal Shock Resistance a Higher Film Builds Than The Competition a Meets NACE SP0198 (SS-4, SS-5, CS-6, CS-8) a Corrosion Protection From -300°F to 1200°F a Insulating Coatings For Personnel Protection Up To 350°F
Specialty Coatings for Peak Performance
Spray-Safe (Dry-Fall)
High Temperature
ChemTemp
Corrosion Under Insulation
Highland Contact Info1-828-265-2513
highland-international.com
Quick SpecsUnique Coatings for All of Your Industrial Paint Needs
Spray-Safe (Dry-Fall)Product Coating Category Vehicle Type Color Availability DFT Range
68-R Topcoat Aliphatic Urethane Standard & Custom 2-4
84-DF Primer Modified Alkyd Off-White 2-6
200-QD Direct-To-Metal Chain-Stopped Alkyd Standard & Custom 2-6
475-R Primer/DTM Polyamine Epoxy Standard & Custom 2-12
High TemperatureProduct Coating Category Temp Range Vehicle Type Color Availability DFT Range
15-ZN Primer 250°F - 1000°F Silicone Copolymer Zinc Yellow Gray 2-3
802 Primer/DTM Ambient - 600°F Modified Silicone Alkyd Gray 2-5
815 Topcoat Ambient - 500°F Modified Silicone Acrylic Standard & Custom 2-3
827-HB Direct-To-Metal -300°F - 1200°F Inert Multipolymeric Matrix Black, Gray, Aluminum 4-16
899 Topcoat/DTM 350°F - 1000°F Modified Silicone Copolymer Standard & Custom 2-8
ChemTempProduct Coating Category Cargo Rating Vehicle Type Color Availability DFT Range
67-HF Direct-To-Metal Moderate Epoxy Novolac Off-White, Light Blue 10-18
74-AR Direct-To-Metal Harsh & Abrasive Epoxy Novolac Red, Yellow, Green 10-18
74-HF Direct-To-Metal Harsh Epoxy Novolac Red, Yellow, Green 10-18
74-IS Direct-To-Metal Moderate (In-Situ) Epoxy Novolac Oxide Red 10-16
74-NS Direct-To-Metal Harsh (Non-Stick) Epoxy Novolac Standard & Custom 4-8
Corrosion Under InsulationProduct Coating Category Temp Range Vehicle Type Color Availability DFT Range
74-HF Direct-To-Metal -50°F - 350°F Epoxy Novolac Red, Yellow, Green 4-18
350-INS Insulation Coating -50°F - 350°F Composite Ceramic Off White, Gray 80 - 200
827-HB Direct-To-Metal -300°F - 1200°F Inert Multipolymeric Matrix Black, Gray, Aluminum 4-16
Technical SupportNACE and SSPC certified technical staff members
Affordable PriceHighland coatings give you
the best bang for your buck
Customer ServiceThe Best Customer Service
in the Industry
Top Related