www.ti.com/automation 2014
Programmable Logic Control (PLC) Solution Guide
Industrial Automation Solutions
The Programmable Logic Controller (PLC) is the workhorse of Industrial Control systems. It uses digital and analog I/O modules to interface to sensors, actua-tors and other equipment. These I/O modules must meet stringent electri-cal specifications and designers face challenges in condi tioning and convert-ing these signals. In addition, increas-ing levels of embedded processing and connectivity can be seen on these modules.
The PLC SystemPLCs can be segmented by I/O count and scan rates. They can also be classi-fied as brick type versus modular PLCs. A small or brick PLC has a fixed number of connections for inputs and outputs. Modular PLCs have a chassis (also called a rack) into which are placed modules with different functions. The processor and selection of I/O modules is custom-ized to fit the application. A modular PLC consists of the Central Processing Unit (CPU), a power supply and various I/O modules. The CPU performs the main controller functions like scanning data and running control sequences. The power supply unit converts line power to 24 volts. The I/O modules are used to measure data from sensors and to
control various actuators. Together, the input and output modules along with the central controller form a control loop.
I/O Module TypesI/O modules can be classified as analog input (AI), analog output (AO), digital input (DI) and digital output (DO). They are usually cate go rized into 2-, 4-, 8- and 16-channel modules. I/O modules need to meet stringent electrical specifications such as the IEC 61000-4 family of Electro Magnetic Compatibility (EMC) tests for surge, ESD (Electro static Discharge) and EFT (Electrically Fast Transients). They also need short-circuit and over load protection. All these modules include isolation between the control side and the field side via DC-DC converters and isolation on digital commu nication between the field devices and the digital backplane. Communication over the digital backplane is done by a variety of interfaces (RS-485, CAN, Ethernet, LVDS, etc.) In distributed control system or between equipment industrial fieldbuses (PROFIBUS®, DeviceNet™, CANopen®, Modbus®, EtherCAT®, EtherNet I/P™, PROFINET®, SERCOS®, POWERLINK, etc.) are used for communication. On the following pages we discuss solutions from TI for these various I/O types.
110V /220V
Programmable Logic Controller with local IO(DIN-rail in cabinet)
Remote IO(DIN-rail)
Decentralized IO(machine attached)
CPU
Coms
SpecialFunction
BusCoupler
SpecialFunction
BusCoupler
Power
Slave
Slave
Master
Slave
Std Ethernet
Industrial Ethernet
BusCoupler
Pow
er
Back
pla
ne B
us
Inpu
t
Pow
er
In-/
Out
put
Back
pla
ne B
us
Pow
er
Inpu
t
Pow
er
In-/
Out
put
In-/
Out
put
Pow
er
Inpu
t
Table of Contents
Programmable Logic Control2 Overview
Analog Input3 Analog Front End3 Precision Amplifier3 Precision ADC
(£ 10MSPS)4 Digital Isolator4 Voltage Reference
Analog Output4 Precision DAC4 Analog Output Driver
Digital I/O5 Digital Serializer5 Drivers
Connectivity & Interface5 Industrial Interface
Transceiver6 Isolated Industrial Interface6 Ethernet PHY
Power6 Input Power Protection6 LDO Linear Regulator7 DC-DC Regulator7 Window Comparator
Embedded Processing Solutions for PLC7 Embedded Processing Solutions
2 | Programmable Logic Control (PLC) Solution Guide 2015 Texas Instruments
Programmable Logic Control (PLC)Overview
Analog Inputs
Analog input modules capture and measure signals such as tempera-ture, pressure, flow, level, vibration and motion. These parameters are transmit-ted from equipment such as sensors and other field devices on the factory floor in the form of current or voltage. Current loops typically range from 4–20 mA while voltage inputs can be single ended or differential ranging from 0–5V, 0–10V, ±5V and ±10V.
Group Isolated Analog Input Module
Per Channel Isolated Analog Input Module
AMP
Protection
Protection±5 V, ±10 V
0–5 V, 0–10 V
4–20 mA0–10 mA
From Sensors
Group Isolated Analog Input Module
DigitalIsolation
DigitalIsolation
Controller Interface
Memory
Buffer
HART
ADC
VREF
PGAMUX
Buffer
Protection
Protection
AMP
Controller Interface
MemoryDigital
Isolation
DigitalIsolation
ADC
ADC
±5 V, ±10 V0–5 V, 0–10 V
4–20 mA0–10 mA
Field Inputs From Sensors
DigitalIsolation
DigitalIsolation
Controller Interface
PGA
AMP
ADCMUX
Protection
Protection VREF
V+
Temp
Flow
Optical
Pressure
Level
+
LEGEND Logic
ADC/DACClocksOther
Power
RF/IF
ProcessorInterface
Amplifier
Precision Amplifiers
Device DescriptionNumber of Channels
Total Supply Voltage (Min)
(+5V=5, ±5V=10)
Total Supply Voltage (Max)
(+5V=5, ±5V=10)
Vos (Offset Voltage @
25°C) (Max) (mV)
Offset Drift (Typ)
(µV/°C)
Slew Rate (Typ) (V/µs)
GBW (Typ) (MHz)
Iq per Channel
(Max) (mA)
Vn @ 1kHz (typ)
(nV/rtHz)
Operating Temp. Range
(°C)Pin/
PackagePrice * (US$)
OPA21880.03µV/°C, 6µV Vos, low-noise, rail-to-rail output, 36V zero-drift operational amplifier
2 4 36 0.025 0.03 0.8 2 0.475 8.8 –40 to 105 8/SOIC, 8/VSSOP 1.40
OPA2111.1nV/rtHz noise, low-power, precision operational amplifier in tiny DFN-8 package
1 4.5 36 0.05 0.15 27 45 4.5 1.1 –40 to 1258/SOIC, 8/SON,
8/VSSOP3.45
OPA14011MHz, single-supply, low-noise, precision, rail-to-rail output, JFET amplifier
1 4.5 36 0.12 0.35 20 11 2 5.1 –40 to 1258/SOIC,
5/SOT-23, 8/VSSOP
1.55
OPA827 Low-noise, high-precision, JFET-input operational amplifier 1 4 36 0.15 2 28 22 5.2 4 –40 to 125 8/SOIC, 8/
VSSOP 3.75
OPAx227 High-precision, low-noise operational amplifiers 1–4 5 36 0.075 0.1 2.3 8 3.8 3 –40 to 85
DIP-8, SO-8, DIP-14, SO-14
1.10 to 2.60
OPA320 Precision, 20 MHz, 0.9pA Ib, RRIO, CMOS operational amp 1 1.8 5.5 0.15 1.5 10 20 1.75 8.5 –40 to 125 5/SOT-23,
6/SOT-23 0.80
OPA365 2.2V, 50MHz, low-noise, single-supply rail-to-rail operational amplifier 1 2.2 5.5 0.2 1 25 50 5 4.5 –40 to 125 5/SOT-23,
8/SOIC 0.65
OPA335/ 2335
0.05 µV/°C max, single-supply CMOS operational amplifier 1/2 2.7 5.5 0.005 0.02 1.6 2 0.35 1.4 –40 to 125
5/SOT-23, 8/SOIC,
8/VSSOP
1.00/ 1.60
Precision ADCs (£ 10MSPS)
Device DescriptionResolution
(Bits)
Sample Rate (Max) (SPS)
No. of Input Channels
VREF (V)
INL (Max)
(±)
Power Consumption (Typ) (mW) Architecture
Input Voltage
Range (V) Interface
Operating Temperature Range (°C)
Pin/ Package
Price* (US$)
LMP90097/098/ 099/100
Multi-channel, low power 24-bit sensor AFE with true continuous background calibration
24 214 2/2/4/4 Diff 4/4/7/7 SE Int/Ext 15 ppm FSR 5.3 Delta-Sigma ±VREF/PGA Serial SPI –40 to 125 28/HTSSOP 2.86/3.01/
3.17/3.33
ADS1246/7/8Precision 24-bit ADC with integrated low-noise PGA (48nV at a gain of 128)
24 2k 1/2/4 Diff 1/3/7 SE Int/Ext 0.00002%
FSR 1.4 Delta-Sigma ±VREF/PGA Serial SPI –40 to 105 28/TSSOP 3.45/4.45/ 4.95
ADS1252/4/5/8ResolutionPlus 24-bit, 40-kHz analog-to-digital converter
24 41k/20k/ 30k/125k 1/2/4/16 Ext 0.0015%
FSR 40/4/36/42 Delta-Sigma ±VREF/PGA Serial SPI –40 to 85 SOIC/16SSOP/ 20SSOP/48VQFN
6.45/7.17/ 6.96/13.05
ADS1259 Low-noise, 14kSPS, 24-bit analog-to-digital converter 24 14.4k 1 Int/Ext 0.0003%
FSR 13 Delta-Sigma ±VREF/PGA Serial SPI –40 to 105 20/TSSOP 5.60
ADC141S626/ ADC161S262
14-/16-bit, 50 to 250 kSPS, differential input, MicroPower ADC
14/16 250k 1 Diff Ext 2 LSB 4.8/5.8 SAR 0–5.5 Serial SPI –40 to 105 10/VSSOP 3.42/5.00
ADS82012.2V to 5.5V, low-power, 12-bit, 100kSPS, 8-channel DAS with PGA and SPI™
12 100k 8 Ext 0.9 LSB 1.32 SAR 0-5.5 Serial SPI –40 to 85 24/VQFN 2.75
ADS8319 Precision 16-bit SAR w/ SPI interface 12/16/16 250 1 SE 2.5/2.5/
4.09 Int 1.5 LSB 18 SAR ±10 Serial SPI –40 to 85 10/VSSOP, 10/SON 6.00
ADS8634/812-bit, 8-channel, bipolar SAR with software-selectable input ranges
12 1M 4 SE/8 SE Int/Ext 1.5 LSB 5.85/14.45 SAR ±10 Serial SPI –40 to 125 24/VQFN, 30/TSSOP 2.85/3.25
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
Texas Instruments Programmable Logic Control (PLC) Solution Guide 2015 | 3
Analog Outputs
Analog output modules are used to drive and con trol actuators and other machines to form part of an overall control system. Current-loop outputs typically range from 4–20 mA while voltage outputs range from 0–5V, 0–10V, ±5V and ±10V.
CommunicationFieldbus IN
Group Isolated Analog Output Module
Per Channel Isolated Analog Input Module
AMP
Protection
Protection
AMPControllerInterface
Memory
DigitalIsolation
DigitalIsolation
DAC
DAC
DigitalIsolation
DigitalIsolation
ControllerInterface
AMP
AMP
DAC
Protection
Protection
AMP Protection
VREF
ProtectionAMPDigital
IsolationDAC
To Field Acutators
I/V Driver
4–20 mA
Voltage Driver
0–5 V, 0–10 V, ±5 V, ±10 V
Current Driver
0–5 V, 0–10 V, ±5 V, ±10 V4–20 mA
I/V Driver
4–20 mA
Voltage Driver
0–5 V, 0–10 V, ±5 V, ±10 V
Current Driver
0–5 V, 0–10 V, ±5 V, ±10 V4–20 mA
LEGEND Logic
ADC/DACClocksOther
Power
RF/IF
ProcessorInterface
Amplifier
Digital Isolators
Part Number Description
Isolation Rating
(kVrms)
Peak Isolation Rating (Vpk)
Working Voltage (Vpk)
Forward /Reverse
Channels
Speed (Max)
(Mbps)
VCC (Min) (V)
VCC (Max)
(V)Default Output
Propagation Delay (Typ)
(ns)
Operating Temperature Range (°C) Pin/Package
Price* (US$)
ISO7420 Low-power dual-channel isolators 2500 4000 560 2/0 1 3.3 5 High 9 –40 to 105 8/SOIC 0.85
ISO7420FCCLow-power 2/0 dual-channel digital isolator with fail-safe output low and noise filter
2500 4000 2/0 50 3.3 5 Low 20 –40 to 85 8/SOIC 1.05
ISO7631FC 4kVpk low-power triple-channel, 25Mbps digital isolator 2500 4000 1414 3/1 25 2.7 5 Low 17 –40 to 125 16/SOIC 1.40
ISO7141FCC
4242-VPK Small-footprint and low-power 3/1 quad-channel digital isolator with fail-safe output low
2500 4000 560 3 / 1 50 2.7 5 Low 23 –40 to 125 16/SOIC 1.90
Voltage Reference
Part Number Description
VO (V)
Temp Coeff (Typ) (ppm/°C)
Temp Coeff (Max)
(ppm/°C)
Initial Accuracy
@ 25/°C (%)0.1–10Hz Noise (Max) (μVpp)
Iout/Iz (Max) (mA)
Iq (Typ) (µA)
Vin (Min) (V)
Vin (Max)
(V)
Operating Temperature Range (°C) Pin/Package
Price* (US$)
REF5020 Low noise, very low drift, precision voltage reference 2.048 2.5 3 0.05 6 10 800 2.7 18 –40 to 125 8/SOIC,
8/VSSOP 1.35
REF3325 30ppm/°C drift, 3.9µA, voltage reference 2.5 9 30 0.15 84 5 5 2.7 5.5 –40 to 125 3/SC-70,
3/SOT-23 0.85
LM4132 SOT-23 precision low dropout voltage reference
1.024, 1.25, 2.048, 2.5,
4.09610, 20, 30 0.05 170, 190, 240,
285, 310, 350 20 60 2.2 5.5 –40 to 125 5/SOT-23 0.78
Precision DACs
Device DescriptionResolution
(Bits)No. of
Channels
INL (Max) (±LSB)
Output Range (Max)
(V or mA)Settling
Time (µs) Output Type InterfaceReference:
Type
Operating Temperature Range (°C)
Pin/ Package
Price* (US$)
DAC7562/ 8162/ 8562
12/14/16-bit, dual, low-power, ultra-low glitch, buffered voltage output DAC with 2.5V, 4ppm/°C reference
12/14/16 2 12 0–5V 7 Buffered voltage Serial SPI Ext, Int –40 to 125 10/VSSOP,
10/WSON
2.50 / 3.85 / 4.20
DAC161S055 Precision 16-bit, buffered voltage-output DAC 16 1 3 +2.5V to VA 5 Buffered
voltage Serial SPI Ext –40 to 105 16/WQFN 2.95
DAC7716/ 8234/ 8734
12/14/16-bit quad high accuracy ±16.5V output digital-to-analog converter
12/14/16 4 4 –16.5V–33V 15 Buffered voltage Serial SPI Ext –40 to 105 48/VQFN,
64/TQFP
8.20 / 14.95 / 20.00
DAC7718/ 8218/ 8718
12/14/16-bit octal high accuracy ±16.5V output digital-to-analog converter
12/14/16 8 4 –16.5V–33V 15 Buffered voltage Serial SPI Ext –40 to 105 48/VQFN,
64/TQFP
8.95 / 13.45 / 16.45
DAC161P997/ S997
SPI 16-bit precision DAC for 4–20mA loops 16 1 9 4mA–20mA Current PCI/
Serial SPI Ext –40 to 105 16/WQFN 1.75
Analog Output Driver
Part Number DescriptionVs (Min)
(V)Vs (Max)
(V)Non-Linearity
(Max) (%)
Auxiliary Output Voltage
(V)Span Error (Max) (%)
Offset Voltage (±) (Max) (µV)
Offset Voltage Drift (±) (Max) (µV/°C)
Pin/ Package
Price* (US$)
XTR300 Industrial analog current/voltage output driver 10 40 0.1 17.5 0.12 1900 6 20/VQFN 1.90
XTR117 4-20mA current loop transmitter 7.5 40 0.02 5 0.4 50 6 8/SON, 8/VSSOP 0.90
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
4 | Programmable Logic Control (PLC) Solution Guide 2015 Texas Instruments
Digital Input
Digital input modules capture and measure digital input signals from a wide variety of sensors like proximity switches, limit switches and push button switches. Inputs typically are 0–24V with tolerances up to 30V. Digital input serializers can be used to serialize a large number of digital inputs allowing higher channel densities in PLC I/O modules.
LEGEND Logic
ADC/DACClocksOther
Power
RF/IF
ProcessorInterface
Amplifier
0 – 24 V±24V
DigitalInput
Serializer
Protection
Protection
Protection
Protection
24 V
DigitalIsolation
Controller Interface
Field InputsFrom Sensors
CommunicationFieldbus IN
CommunicationFieldbus OUT
Digital Serializers
Part Number Description # of Inputs Interface
I/O max rate
(kbps)
Operating Voltage
(V)
I/O Voltage
(V) Special FeaturesIO Current
(mA)
Operating Temperature Range (°C) Pin/Package
Price* (US$)
SN65HVS8818 input, wide 10–34V digital-input serializer with parity for industrial digital inputs
8 SPI 1000 10 to 34 0 to 34
Parity, Over temperature,
Cascadable, Drivers for external LEDs
0.2 to 5.2 –40 to 125 28/HTSSOP 2.00
SN65HVS880 8 input, nominal 24V digital-input serializer for industrial digital inputs 8 SPI 1000 18 to 30 0 to 30
Voltage monitor, Over temperature,
Cascadable, Drivers for external LEDs
0.2 to 5.2 –40 to 85 28/HTSSOP 1.90
Drivers
Part Number Description
Vs (Min)
(V)
Vs (Max)
(V)
Output Current (Max)
(A)Control
I/F
Operating Temperature Range (°C) Pin/Package
Price* (US$)
DRV8803 1A quad relay / solenoid driver 8.2 60 2 PWM –40 to 85 20/SOIC, 16/HTSSOP 1.40
DRV8804 1A quad relay / solenoid driver 8.2 60 2 Serial –40 to 85 20/SOIC, 16/HTSSOP 1.40
DRV8806 1A quad relay / solenoid driver w/ open load detect 8.2 40 2 Serial –40 to 85 16/HTSSOP 1.25
DRV8844 1.75A quad high-side / low-side driver 8 60 2.5 PWM –40 to 85 28/HTSSOP 2.50
DRV8860 200mA octal low-side driver w/ open load detect 8 38 0.56 Serial –40 to 85 16/TSSOP 1.50
Digital Output
This is where the copy goes nsmbah njhs jhiuysd. Najusdy gsd nbhgausyd. Mjahsdu has ncbc iuiys njjasgdy vfuy std mn. Jkadhasgduy uyfi7rda frr ncbkuy ytfr7trsd gut7rsd.
Texas Instruments Programmable Logic Control (PLC) Solution Guide 2015 | 5
Isolated Industrial Interface
Part Number Description
Integrated Transformer
Driver Duplex
Isolation Rating
(kVrms)
VCC1 (Min)
(V)
VCC1 (Max)
(V)
VCC2 (Min) (V)
VCC2 (Max)
(V)Datarate (Mbps)
Number of Nodes
ESD (kV) Fail Safe
Operating Temperature Range (°C) Pin/Package
Price* (US$)
ISO1176 Isolated PROFIBUS® RS-485 transceiver No Half 2.5 3.15 5.5 4.75 5.25 40 256 16 Idle, Open,
Short –40 to 85 16/SOIC 3.00
ISO1176TIsolated PROFIBUS transceiver with integrated transformer driver
Yes Half 2.5 3 5.5 4.75 5.25 40 256 10 Idle, Open, Short –40 to 85 16/SOIC 3.30
ISO1050 Isolated 5-V CAN transceivers No Half 2.5, 5 3 5.5 4.75 5.25 1 4 Idle, Open,
Short –55 to 105 16/SOIC, 8/SOP 1.55
Ethernet PHY
Part Number Description Interface
Cable Length
(m)LED (#)
Supply Voltage
(V)Datarate (Mbps) JTAG 1149.1
Port Count Special Features
Operating Temperature Range (°C) Pin/Package
Price* (US$)
TLK110 Industrial 10/100 Ethernet PHY MII, RMII 150 3 3.3 10/100 Yes Single
Deterministic delay, Programmable fast link
down modes, Cable diagnostics
–40 to 85 48/LQFP 2.20
TLK105Industrial temp, single-port 10/100Mbs Ethernet physical layer transceiver
MII, RMII 150 1 3.3 10/100 No SingleDeterministic delay,
Programmable fast link down modes
–40 to 85 32/VQFN 0.99
TLK105L
TLK105L, TLK106L industrial temp, single-port 10/100Mbs Ethernet physical layer
MII, RMII 150 2 3.3 10/100 No Single
Deterministic delay, Programmable fast link
down modes, Cable diagnostics, FX support
–40 to 85 32/VQFN Preview
TLK106Industrial temp, single-port 10/100Mbs Ethernet physical layer transceiver
MII, RMII 150 1 3.3 10/100 No Single
Deterministic delay, Programmable fast link
down modes, Cable diagnostics
–40 to 105 32VQFN 1.19
TLK106L
TLK105L, TLK106L industrial temp, single-port 10/100Mbs Ethernet physical layer
MII, RMII 150 2 3.3 10/100 No Single
Deterministic delay, Programmable fast link
down modes, Cable diagnostics, FX support
–40 to 105 32/VQFN Preview
PowerTo protect against transients and ground loops, the module is electrically isolated from the control side. The design can be customized for perfor mance and cost by using a DC-DC converters. Finally, using LDOs with good PSRR (power supply rejection ratio) to supply the precision analog circuitry will reduce the power supply ripple and preserve system accuracy and resolution.
Analog ±5V, ±10V, ±15V, ±10VDigital 1.0V, 1.8V, 3.3V, 5V
12-24VBackplane
Isolation barrier
DC/DC LDO Isolated DC/DC
DC/DC
SupervisorSequencer
E-Fuse & Protection
5V, 3.3V, 1.8V, 1.0V
Connectivity & Interface
Connectivity options ranging from Ethernet ports to UARTs to simple SPI ports are required. Ethernet enables integration of field devices to the corpo-rate enterprise network. There are a
number of fieldbus options – both serial (RS-485, DeviceNet™, PROFIBUS®, CAN, etc.) and Ethernet based. Extended cable reach and diagnostics to debug wire breaks provides system designers
significant value. Integrated digital isola-tion on the interface transceivers is highly desirable to reduce board space.
Industrial Interface Transceivers
Part Number Description
Bus Fault Voltage
(V)
ICC (Max) (mA)
Number of Nodes Date Rate Duplex ESD
Supply Voltage(s)
(V)Special
Features
Operating Temperature Range (°C) Pin/Package
Price* (US$)
SN65HVD257
CAN transceiver with fast loop times for highly loaded networks and features for functional safety
–27 to 40 85 10kbps to 1Mbps Half ±12 kV HBM protection 4.5 to 5.5
High-speed, Turbo short prop delay, Redundancy
and functional safety–40 to 125 8/SOIC 0.60
SN65HVD888Bus-polarity correcting RS-485 transceiver with IEC-ESD protection
–18 to 18 0.9 256 300bps to 250kbps Half
±16 kV HBM protection, ±12 kV IEC61000-4-2
contact discharge, +4 kV IEC61000-4-4 fast
transient burst
4.5 to 5.5
Bus-polarity correction within 76ms (tFS),
Exceeds requirements of EIA-485 Standard
–40 to 85 8/SOIC 1.10
*Suggested resale price in U.S. dollars in quantities of 1,000. Preview products are listed in bold teal.
6 | Programmable Logic Control (PLC) Solution Guide 2015 Texas Instruments
DC-DC Converters
Part Number Description
Vin (Min)
(V)
Vin (Max)
(V)
Vout (Min)
(V)
Vout (Max)
(V)Iout (A) Topology
Switch Current
Limit (Typ) (A)
Iq (Typ) (mA)
Duty Cycle (Max) (%) Soft Start Compensation Special Features
Operating Temperature Range (°C)
Pin/Package
Price* (US$)
TPS550102.95V to 6V input, 2W, isolated DC/DC converter with integrated FETS
2.95 6 3.3 20 0.4 Fly-buck 2.75 0.575 Adjustable External
Enable, synchronous rectification, Isolated,
Power good, Frequency synchronization
–40 to 150 16/WQFN 0.99
TPS62150
3–17V 1A step-down converter with DCS-Control™ in 3×3 QFN package
3 17 0.9 6.3 1Buck,
Synchronous buck
1.7 0.017 100 Adjustable Internal
Enable, Light load efficiency, Power good,
Tracking, Voltage margining
–40 to 85 16/QFN 0.98
LMZ34002
4.5V– 40V input, up to 15W negative-output integrated power solution
4.5 40 –3 –17 2Boost,
Synchronous buck module
3 Adjustable External
Integrated inductor, EMI tested, Negative output, Soft start, Overcurrent
protection, Remote sense, External clock sync
–40 to 85 41/B1QFN 6.75
TPS40210 Wide input range current mode boost controller 4.5 52 5 260 6 Boost NA 1.5 95 Adjustable Internal Enable, frequency
synchronization –40 to 12510/MSOP-PowerPAD,
10/SON0.80
TPS54160A3.5V to 60V input, 1.5A step-down converter with Eco-Mode
3.5 60 0.8 58 1.5Buck,
Inverting buck-boost
1.8 0.116 98 Adjustable External
Enable, Frequency synchronization, Light load efficiency, Power
good, Tracking
–40 to 15010/MSOP-PowerPAD,
10/SON1.58
TPS540624.7V to 60V input, 50mA synchronous step-down converter
4.7 60 0.8 58 0.05
Buck, Inverting
buck-boost, Synchronous
buck
0.13 0.089 98 Fixed ExternalEnable, Frequency
synchronization, Light load efficiency
–40 to 125 8/SON, 8/VSSOP 0.88
TPS54362-Q1
Automotive catalog 3A, 60V step-down DC/DC converter with low Iq, voltage supervision and reset
3.6 60 0.9 18 3 Buck 6 0.065 90 Fixed External Enable, Power good –40 to 125 20/HTSSOP 2.80
LM5017100V, 600mA constant on-time synchronous buck regulator
9 100 1.25 90 0.6
Constant on-time
synchronous buck
1.3 1.75 90 ExternalNo
compensation needed
Intelligent current limit, primary-side fly-buck
regulation–40 to 125
8/SO PowerPAD, 8/WSON
1.57
LDO Linear Regulators
Part Number Description Output Options
Iout (Max)
(A)
Vin (Min) (V)
Vin (Max)
(V)
Vout (Min) (V)
Vout (Max)
(V)Iq (Typ)
(mA)
Vdo (Typ) (mV) Additional Features
Operating Temperature Range (°C)
Pin/Package
Price* (US$)
TPS7A4901Vin 3V to 36V, 150mA, ultra-low noise, high PSRR, low-dropout linear regulator
Adjustable output 0.15 3 36 1.2 33 0.06 260Over current protection,
Thermal shutdown, Enable, Soft start
–40 to 125 8/MSOP-PowerPAD 1.10
TPS7A3001Vin –3V to –36V, –200mA, ultra-low noise, high PSRR, low-dropout linear regulator
Adjustable output, Negative output 0.2 –3 –36 –1.18 –33 0.05 216
Soft start, Enable, Over current protection,
Thermal shutdown–40 to 125 8/MSOP-
PowerPAD 1.50
TLV700 200mA, Low IQ, Low dropout regulatorFixed 1.2V, 1.3V, 1.5V, 1.8V, 1.9V, 2.2V, 2.5V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.6V
0.2 2 5.5 Fixed outputs
Fixed outputs 0.03 175
Enable, Over current protection,
Thermal shutdown–40 to 125
5/SC-70, 5/SOT,
6/WSON0.13
TLV704 24V, 150mA, Ultra-low IQ, High Vin, Low-dropout regulator Fixed 3.0V, 3.3V, 3.6V, 5.0V 0.15 2.5 24 Fixed
outputsFixed
outputs 0.003 400Stable with any capacitor
(> 0.47 µF), Over current protection
–40 to 125 5/SOT 0.25
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
Input Power Protection
Part Number Description
Vin (Min) (V)
Vin (Max) (V)
Current Limit Threshold (A) Enable Fault Response Special Features
Operating Temperature Range (°C) Pin/Package
Price* (US$)
LM5060 High-side protection controller with low quiescent current 5.5 65 Externally
adjustable Yes Latch off No External RSENSE –40 to 125 10/VSSOP 1.09
Window Comparator
Part Number Description
Vs (Min)
(V)
Vs (Max)
(V)
tRESP Low-to-High
(µs)
Vos (Offset Voltage @
25°C) (Max) (mV)
Iq per Channel
(Max) (mA)Output Type
Input Bias Current
(±) (Max) (nA)
Number of Channels Special Features
Rail-Rail
Operating Temperature Range (°C)
Pin/Package
Price* (US$)
LMV762 Low voltage, precision comparator with push-pull output 2.7 5 0.12 1 0.7 Push-pull 0.005 2 –40 to 125 8/SOIC,
8/VSSOP 0.85
TPS3700High-voltage (18V) window comparator with over- and undervoltage detection
1.8 18 29 5.5 0.013 Open drain 25 1
Hysteresis, Internal reference, Window
comparatorIn –40 to 125 6/SOT,
6/WSON 0.70
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
Texas Instruments Programmable Logic Control (PLC) Solution Guide 2015 | 7
SLYY041B© 2015 Texas Instruments IncorporatedPrinted in U.S.A. by (Printer, City, State)
The platform bar, C2000, DCS-Control, Delfino, E2E, MSP430, Piccolo, Sitara and Tiva are trademarks of Texas Instruments. All other trademarks are the property of their respective owners.
Embedded Processing Solutions for PLCDescription Device Series Key BenefitsSitara™ ARM® Cortex™-A8 processors with integrated industrial communications support
AM3359AM3517
• Integratedindustrialcommunicationssupportincluding:EtherCAT®, PROFIBUS®, EtherNet/IP™, PROFINET®, POWERLINK, SERCOS-III, CANOpen®, and more, with scalable performance
TMS570 ARM Cortex-R4F-based microcontroller for safety-critical applications up to 160 MHz and 2-MB Flash
TMS570LS2x • Supportforsafety-criticalapplicationsuptoIEC61508SIL-3• ThreeintegratedCANcontrollers• PowerfulCortex-R4Ffloating-pointCPU• Upto2MBofintegratedFlashmemory
RM4x ARM Cortex-R4-based microcontroller for safety-critical applications up to 220 MHz and 3-MB Flash
RM42xRM46xRM48x
• Supportforsafety-criticalapplicationsuptoIEC61508SIL-3• ThreeintegratedCANcontrollers• PowerfulCortex-R4CPU• From384KBupto3MBofintegratedFlashmemory
MSP430™ 16-bit ultra-low-lower microcontroller family. Up to 25 MHz, 0.5KB Ù 512KB NVM
MSP430F2xxxMSP430FR57xxxMSP430F5xxx/F6xxx
• Broadportfolioof–40Ù 105°C devices• InnovativeULPFRAMnon-volatilememory• 10–24-bitADCs,op-ampsandDACs
Tiva™ C Series ARM Cortex-M4 MCUs with up to 80 MHz and 256-kB Flash
TM4C123x • Upto120GPIOsthatcandriveover600mA• Upto8UARTs,4SPI,and6I2C• TwointegratedCANcontrollersandUSBOTG
C2000™ 32-bit real-time MCUs up to 300 MHz, including dual-core C28x + ARM Cortex-M3 devices with up to 1.5 MB of Flash
C28x Piccolo™ MCUs C28x Delfino™ Floating-point MCUs C28x + ARM Cortex-M3 F28M3x MCUs
• IEC61131-3programmingwithCoDeSys• Integratedreal-timecontrolperipheralscoupledwithintegratedcommunicationsinterfaces• SupportforPowerLineCommunicationsstandards
See next page for more information on Embedded Solutions.
TI Worldwide Technical SupportInternetTI Semiconductor Product Information Center Home Pagesupport.ti.comTI E2E™ Community Home Pagee2e.ti.com
Product Information CentersAmericas Phone +1(512) 434-1560
Brazil Phone 0800-891-2616
Mexico Phone 0800-670-7544
Fax +1(972) 927-6377 Internet/Email support.ti.com/sc/pic/americas.htm
Europe, Middle East, and AfricaPhone
European Free Call 00800-ASK-TEXAS (00800 275 83927)
International +49 (0) 8161 80 2121
Russian Support +7 (4) 95 98 10 701
Note: The European Free Call (Toll Free) number is not active in all countries. If you have technical difficulty calling the free call number, please use the international number above.
Fax +(49) (0) 8161 80 2045Internet www.ti.com/asktexasDirect Email [email protected]
JapanFax International +81-3-3344-5317 Domestic 0120-81-0036Internet/Email International support.ti.com/sc/pic/japan.htm Domestic www.tij.co.jp/pic
AsiaPhone Toll-Free Number Note: Toll-free numbers may not support
mobile and IP phones. Australia 1-800-999-084 China 800-820-8682 Hong Kong 800-96-5941 India 000-800-100-8888 Indonesia 001-803-8861-1006 Korea 080-551-2804 Malaysia 1-800-80-3973 New Zealand 0800-446-934 Philippines 1-800-765-7404 Singapore 800-886-1028 Taiwan 0800-006800 Thailand 001-800-886-0010International +86-21-23073444Fax +86-21-23073686Email [email protected] or [email protected] support.ti.com/sc/pic/asia.htm
B021014
Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and conditions of sale. Customers are advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer’s applications or product designs, software performance, or infringement of patents. The publication of information regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and otherchanges to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latestissue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current andcomplete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of salesupplied at the time of order acknowledgment.TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s termsand conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessaryto support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarilyperformed.TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products andapplications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provideadequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, orother intellectual property right relating to any combination, machine, or process in which TI components or services are used. Informationpublished by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty orendorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of thethird party, or a license from TI under the patents or other intellectual property of TI.Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alterationand is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altereddocumentation. Information of third parties may be subject to additional restrictions.Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or servicevoids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirementsconcerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or supportthat may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards whichanticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might causeharm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the useof any TI components in safety-critical applications.In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is tohelp enable customers to design and create their own end-product solutions that meet applicable functional safety standards andrequirements. Nonetheless, such components are subject to these terms.No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the partieshave executed a special agreement specifically governing such use.Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use inmilitary/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI componentswhich have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal andregulatory requirements in connection with such use.TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use ofnon-designated products, TI will not be responsible for any failure to meet ISO/TS16949.Products ApplicationsAudio www.ti.com/audio Automotive and Transportation www.ti.com/automotiveAmplifiers amplifier.ti.com Communications and Telecom www.ti.com/communicationsData Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computersDLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-appsDSP dsp.ti.com Energy and Lighting www.ti.com/energyClocks and Timers www.ti.com/clocks Industrial www.ti.com/industrialInterface interface.ti.com Medical www.ti.com/medicalLogic logic.ti.com Security www.ti.com/securityPower Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defenseMicrocontrollers microcontroller.ti.com Video and Imaging www.ti.com/videoRFID www.ti-rfid.comOMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.comWireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265Copyright © 2014, Texas Instruments Incorporated