Dear SLP Customer,
Riding a UTV is as much about the journey as the destination.And making the journey more exciting is what we specialize in.Whether your journey takes you through the deep dark woods, upa twisty mountain trail, onto the scorching sands, into the deep-est mud holes or across the nastiest rocks this earth has to offer,we can help. We have many new and exciting products that addprotection, performance and comfort scattered throughout thepages of this catalog. Please feel free to contact one of our knowl-edgeable representatives with any questions you may have.
Always Ready to Serve,
The Starting Line Products Crew
3
RZR Doors for Polaris 570 RZR, 800 RZR,RZR-S and RZR XP 900SLP’s RZR Doors partially enclose the cab area to
help keep dust, dirt, mud, and water out. Our unique
hinge design allows the door to be easily removed.
These doors use a rear mounted hinge with the latch
in the front for ease of entry and exit. The spring-
loaded interior latch assembly allows quick and easy
access with only a light push or pull required on the
door to latch it closed. Designed to provide the opera-
tor and passenger a more comfortable off-road expe-
rience, these doors utilize a lightweight tube frame
design with plastic hard side. Sold per pair.2011-12
2008-10
Door Graphic
Kits Coming
Soon!
PART # DeSCRiPTion PRiCe/PAiR
67-144 2008-10 RZR and RZR-S 429.00
67-122 2012 570 RZR
2011-12 800 RZR and RZR-S
429.00
67-122 2011-12 RZR XP 900 429.00
Part # 67-144 now utilizes the same popular
interior latch design as part # 67-122.
4
Rocker Armor™ for Polaris RZR SLP’s Rocker Armor™ protects the underside of the Polaris RZR
against rocks and other hard objects without losing valuable
ground clearance. Made
of high-tensile steel for
superior strength. They
slide easily over sharp
rocks and are extremely
resistant to gouging. The
protection area covers
from wheel well to wheel
well and they are powder
coated for maximum durability. In-
cludes mounting hardware and in-
stallation instructions. Sold per pair.
Free Freight*
to Lower
48 States*Free freight is available for ground service only on SLP’s choice of carriers.
Integrated
Fuel Tank
Guard (RZR XP
900 only).
**RZR 900 Rocker Armor has an integrated fuel tank guard.
RZR 900 XP Rocker Armor
RZR/RZR-S Rocker Armor
800 RZR-4 Rocker Armor
PART # DeSCRiPTion CoLoR PRiCe/PAiR
67-100 570/800RZR and RZR-S Silver and Black 255.00
67-103 570/800RZR and RZR-S Black Texture 255.00
67-109 800 RZR-4 Silver and Black 479.00
67-110 800 RZR-4 Black Texture 479.00
67-126 RZR XP 900** Silver and Black 299.00
67-127 RZR XP 900** Black Texture 299.00
67-145 RZR-4 XP 900 Black Texture TBA
5
Performance Slip-on Silencer for Polaris 800 RZR This performance slip-on silencer for the Polaris RZR is designed for maximum
airflow without substantially increasing sound level output. It provides a 79%
increase in airflow over the stock silencer. This results in a substantial
performance improvement, showing better throttle response as well as top-end
horsepower. The sound levels are within 2 decibels of stock (90 dBA on SAE
J1287 test) for a trail friendly performance silencer. It also features a removable
Forest Service approved spark arrestor.
Super Silent Muffler for Polaris 800 RZR, RZR-S and RZR-4 This muffler for the Polaris RZR is an incredible 5 decibels quieter than stockwhile providing a 41% increase in airflow (20 more cfm) for more power. The
subtle sound of this muffler provides a relaxing environment for the rider and
passenger to carry on a conversation easily while under way, not to mention the
benefit to others in the surrounding area. Whether you are using your RZR to get
you in and out of your favorite hunting spots, or just want to have a more enjoy-
able ride with less noise, this muffler is perfect for you.
Features a removable Forest Service approved spark arrestor.note: 2009 standard RZR will require the rear differential stabilizerbracket to be changed to the 2010 rear differential stabilizerbracket (Polaris Part number 3235062).
PART # DeSCRiPTion PRiCe
09-108 2008-12 Polaris 800 RZR, RZR-S and RZR-4 355.95
PART # DeSCRiPTion PRiCe
09-106 2008-12 Polaris 800 RZR, RZR-S and RZR-4 279.95
5 dB quieter on
SAE J1287
stationary
test @ 3300 RPM
6
Performance Slip-on Muffler for Polaris RZR XP
900 and RZR-4 XP 900This new slip-on silencer for the Polaris XP 900 RZR de-
livers well over double the airflow compared to the stock
silencer. This translates into a substantial performance
increase and better throttle response. Its stainless steel
construction provides excellent strength and durability.
The sound level measures 91.5 DB using the SAE J
1287 sound test. It also includes a spark arrestor that
can be added for trail use.
PART # DeSCRiPTion PRiCe
09-109 2011-12 RZR XP 900
and 2012 RZR-4 XP 900
475.00
Have you seen PowerSports Adventures?For the second year in a row we have teamed up with the television
show PowerSports Adventures as their title sponsor. Every episode
combines motorsports action with outdoor recreation while showing
some of the latest products for your RZR in action. If you haven’t taken
the opportuninty to see this show we encourage you to tune in and
watch the next episode. It can be found on the Pursuit Channel (Di-
rectTV channel 608 or DishNetwork channel 240) or on the Altitude
Sports and Adventures Channel (DirectTV channel 681 or DishNetwork
channel 410). If using another TV provider check your local listings. Visit
our website (www.startinglineproducts.com) and click on the
PowerSports Adventures link to learn more or to watch previous episodes.
7
Front Bumper kit for Polaris 570 RZR, 800 RZR, RZR-S,RZR-4, XP 900 RZR & XP 900 RZR-4 Whether bajaing down a nasty trail or creeping across
rocky, rugged terrain, this bumper kit protects well against
the gnarliest conditions. Made of 1 3/8” x .095” wall DOM
for strength then powder coated for a great look and
maximum durability. It also features
two anchor points for D-Rings, as
well as mounting points for Baja
Lights. Kit includes all mounting
hardware and installation instruc-
tions.
note: This kit mounts to factory upper mounting location
on RZR 570/800 models . To increase strength of this
mounting position, use SLP High Strength Upper Mount
Kit (part #67-129) see page 8.
PART # DeSCRiPTion PRiCe/kiT
67-101 2008-10 Silver and Black 400.00
67-104 2008-10 Black Textured 400.00
67-123 2011-12 Silver and Black 350.00
67-125 2011-12 Black Textured 350.00
Free Freight*
to Lower
48 States
2008-10
2011-12
*Free freight is available for ground service only on SLP’s choice of carriers.
8
High Strength Front Bumper Upper Mount kit /Radiator Support for Polaris 570/800 RZR, RZR-S and RZR-4This kit replaces the stock radiator mount bracket that also
acts as an upper mounting point for most bumpers. It is
made of high-strength steel that has been reinforced so that
it can take more impact in the event of a crash without the
bumper folding into and damaging the radiator and other
front-end components. Compatible with most factory and
aftermarket front bumpers.
Front Skid Plate for Polaris 570/800 RZR, RZR-S and RZR-4This skid plate covers the area between the SLP Front Bumper and the
stock center plastic skid plate, which is the section of frame where the a-
arms mount. It is made from high-tensile strength steel to protect against
rocks and other hard objects without losing valuable ground clearance.
This material slides easily over sharp rocks and is extremely resistant to
gouging.
PART # PRiCe/kiT
67-130 35.00
PART # PRiCe/kiT
67-129 75.00
9
Rear Bumper kit for 2008-12 Polaris800 RZR, RZR-4 and 2011-12 800 RZR-S This rear bumper kit is a must for any RZR owner! In stock form there
is no protection for the rear of the vehicle. This kit protects your invest-
ment, looks great, and opens up additional storage area. It incorpo-
rates a rear tire mount, freeing up trunk space to haul the necessary
gear so you can fully enjoy your outdoor experience. It also features a
flag mount. Made of 1 3/8” x .095” wall DOM for strength then powder
coated for a great look and maximum durability. Kit includes all mount-
ing hardware and installation instructions.
noT for 2009-10 RZR-S.
PART # DeSCRiPTion PRiCe/kiT
67-102 Silver and Black 375.00
67-105 Black Textured 375.00
Free Freight*
to Lower
48 States
*Free freight is available for ground service only on SLP’s choice of carriers.
Trailing Arm Guards for Polaris XP 900 RZR/RZR-4 Made out of UHMW plastic for super strength and wear resist-
ance, these trailing arm guards provide great protection in all
conditions, but especially in the rocks where they slide easily
over hard surfaces. They compliment the use of our Rocker
Armor (page 4). PART # PRiCe/PAiR
67-137 250.00
Tire not included.
10
Secure Storage Glove Box for
Polaris RZR all modelsThis attractive aluminum glove box from SLP offers well-needed stor-
age for the Polaris RZR. It is built with a strong aluminum body and
faceplate that utilizes a keyed lock for securing your valuables. The
position that it is located in provides the passenger easy access to
this storage, which is great for cell phones, cameras, small hand-
guns, wallets, vehicle registration, etc. Also, it is weather resistant to
protect your valuables.PART # DeSCRiPTion PRiCe/kiT
67-121 Polished Aluminum 155.00
67-128 Black Texture 155.00
Billet Gas and Brake Pedal Covers for 2009-12 Polaris 570/800 RZR, RZR-S, RZR-4 and
XP 900 RZR and RZR-4These billet pedal covers bolt to the stock steel pedals to give you a trick
billet look as well as increased performance. The stock gas pedal will not
reach full throttle without turning your foot sideways to force the pedal
down to full throttle. The additional height of this billet gas pedal comfort-
ably gives you the extra 7% throttle opening the stock pedal lacks. This
allows you to comfortably achieve full throttle every time you desire it.
The unique pattern on these pedals provides the
proper amount of grip on the bottom of your foot.
Sold per set. Will not fit 2008 models.
Shown with pedal
covers installed on
stock levers. Levers
not included
PART # PRiCe/SeT
67-138 84.95
11
Universal 1/2” D-Ring This Universal D-Ring can be mounted to the SLP front bumper
mounts and gives your RZR a rugged offroad look while adding
easy access to winch or tie down points (fits perfectly on the points
of the SLP Front Bumper). Load rated at
4,000 pounds and galvanized for
strength and durability. Requires a 5/8”
hole for D-Ring pin, the D-Ring loop is
1/2” diameter.
PART # PRiCe/eA.
67-117 10.95
1/2” D-Ring and Stinger Combofor Polaris 570/800 RZR, RZR-S and 800 RZR-4This D-Ring and Stinger Combo gives you a solid towing/pulling point on
your RZR without risking damage to the frame or suspension. The D-Ring
is load rated at 4,000 pounds and galvanized for
strength and durability. The stinger is made from
solid billet 6061 T-6 aluminum for a strong, light-
weight and durable part.
PART # PRiCe/kiT
67-119 34.95
Will fit Class ii (1 1/4” x 1 1/4”) receivers.
12
Hood Grill / Radiator Vent kit for 2008-10 Polaris RZR, RZR-S and RZR-4This radiator vent kit not only provides a trick new look but also delivers an
additional 116% more air intake surface area to the radiator. This allows the
radiator to more efficiently cool the engine while moving. Offered with hon-
eycomb or oval pattern backer.
PART # Description PRiCe/kiT
67-135 Grill kit with honeycomb backer 59.95
67-140 Grill kit with oval backer 59.95
Lower Radiator Vent Grill with Hood Hold Down for 2008-10 Polaris RZR, RZR-S and RZR-4This radiator vent grill with honeycomb pattern gives an awesome look while
providing a positive hold down for the hood.
PART # PRiCe/kiT
67-139 49.00
Oval Honeycomb
13
Wheel Spacer kitsfor Polaris RZR all models
These wheel spacer kits allow you to widen your RZR, RZR-S, RZR-4 or RZR XP
900 for more stability when running high speed tight trails/roads or crawling over the
nastiest rock piles. It does so by giving you an additional 7/8” or 1 3/4” width per
side (1 3/4” or 3 1/2” overall). These wheel spacers utilize a locking ring (also known
as Hub Centric) that fits precisely into the wheel to provide maximum strength, dura-
bility and proper balance. This locking ring locks the wheel to the spacer and by doing so places the major-
ity of the stress on the wheel spacers themselves rather than on the studs alone. Also, by ensuring the
wheel is centered with this Hub Centric ring, proper balance is maintained. They are manufactured from
high quality billet aluminum and are precision CNC machined to ensure perfect fit and proper balance.
These wheel spacers can be used on all RZR models with some limitations based on wheel offset and tire
size, see our recommendations below. Simple bolt on installation with no permanent modifications required.
Sold per pair.
7/8” Wheel Spacers. These wheel spacers can be used on all RZR models, and we find the most popular
applications are RZR-S, RZR-4 and RZR XP 900 models to give them more stability. They also work great
on standard RZR models if using larger than 26” tires or aftermarket wheels with more offset than stock
(this is the maximum width that can be used and still keep the tires from contacting the rear of the front
fender well when turning and going through the bumps). They also allow the use of 12” wide rear tires on
stock wheels without contacting the frame (standard RZR).
1 3/4” Wheel Spacers. These wheel spacers can be used on all RZR models, and we find the most
popular applications are standard RZR models using 26”
tires or smaller and stock offset wheels. This provides the
standard RZR much more stability and they can be re-
moved easily to return to stock width for running 50” trails.
PART # DeSCRiPTion PRiCe/PR
67-142 7/8” Wheel Spacer Kit 104.95
67-143 1 3/4” Wheel Spacer Kit 124.95
Sold per pair.
14
Mud Guard for Polaris 570/800 RZRThe Mud Guard will keep rocks, sticks, and any debris from building
up in your undercarriage on the driver side of your vehicle. It’s com-
patible with SLP Rocker Armor™ and is manufactured from 0.090”
thick aircraft grade aluminum. Fits all 570/800 RZR, RZR-S, and
RZR-4.
PART # DeSCRiPTion PRiCe/kiT
67-113 2008-10 800 RZR and RZR-S 62.00
67-114 All 800 RZR-4,
2011-12 570/800 RZR and RZR-S
74.00
Gas Tank Armor for Polaris 570/800 RZRGas Tank Armor is a must have for all 570/800 RZR, RZR-S, and
RZR-4 owners. This product will keep rocks, sticks, and any other
sharp objects from piercing the exposed rear portion of the gas
tank. It is compatible with SLP Rocker Armor™ and is manufactured
from 0.090” thick aircraft grade aluminum.
PART # DeSCRiPTion PRiCe/kiT
67-112 570/800 RZR, RZR-S & RZR-4 54.00
67-113 Pictured
Highly recommended for use with Rocker Armor.
*For fuel tank protection on the RZR XP 900, see our
Rocker Armor™ on page 4.
15
Power Commander V from DynojetThe Power Commander V fuel controller from Dynojet gives you full EFI tuning
capability. It plugs into the stock ECU and allows you to add or subtract fuel
from the stock ECU settings. It is based on a throttle position verses RPM fuel
map with input points at ten different throttle positions and in 250 RPM incre-
ments to give you pinpoint accuracy. SLP has created maps to optimize per-
formance and fuel economy for specific combinations. These fuel maps can be
preprogrammed into the controller at no charge for true plug and play capability.
For the experienced tuner, the controller comes with a computer link cable and software for custom
mapping capabilities. No wiring modi-
fications are required (OEM style con-
nectors are supplied) and no
permanent changes are made to your
stock system.
* Note: These models (part numbers 70-141, 70-142 and 70-147) have the ability to manipulate
ignition timing and Rev-Xtend capabilities.
PART # DeSCRiPTion PRiCe
70-124 2008-10 Polaris 800 RZR, RZR-S and RZR-4 379.95
70-141* 2011-12 Polaris 800 RZR, RZR-S and RZR-4 399.95
70-142* 2011 Polaris RZR XP 900 399.95
70-147* 2012 Polaris RZR and RZR-4 XP 900 399.95
Power Commander Accessories for Experienced TunersSLP offers many tuning aids
to help experienced tuners
make their own maps.
Please inquire or visit our
website for more infor-
mation.
PART # DeSCRiPTion PRiCe
70-136 LCD Display 299.99
70-135 1GB SD Card 15.95
PART # DeSCRiPTion PRiCe
70-132 Wideband 2 499.00
70-134 CAN Cable 17.00
PART # DeSCRiPTion PRiCe
70-126 Autotune 279.99
16
Clutch Vents for Polaris 800 RZR, RZR-S and RZR-4These clutch vents are installed into the clutch cover to allow more air to flow into the clutch
enclosure to reduce clutch and belt heat and help maintain proper
performance. It utilizes a special pre-filter material that repels
water and keeps dirt out yet maintains high airflow.
Sold in a set of 2 vents.PART # PRiCe/PAiR
67-108 49.95
ergonomic Grab Handle withWrist Restraint for Polaris RZR,
RZR-S, RZR-4 and RZR XP 900This grab handle is built for comfort and safety! Its curved design
places hands in a natural position for a more comfortable ride for the
passenger. It features Wrist Restraints which keep hands positioned
on or near the grab handle in the case of a roll over. The adjustable straps allow these restraints to
be used by adults or children. The natural tendency in a roll over situation is to let go of the grab
handle and put your hand out to catch the vehicle. When using these restraints, the passenger is
reminded to keep their hands firmly planted on the grab handle.
PART # DeSCRiPTion PRiCe/kiT
67-116 Ergonomic Grab Handle with Wrist Restraint for 2008-11 models 79.00
67-115 Wrist Restraint Only for 2008-12 models (only works with stock grab bar) 14.99
17
TeAM Tied Driven Clutch for Polaris RZRThis secondary clutch allows you to change helixes and springs to get the
most performance out of your RZR. The stock secondary clutch that comes on
the 2009 and newer Standard RZR as well as 2010 and newer RZR-S and
RZR-4 is an inexpensive model that has the helix cast into the moveable
sheave of the clutch. Changing to this clutch allows you to use a helix that is
more suitable to your RZR's setup and typical riding conditions. Sold as a
complete assembly less helix and spring.
For a custom SLP recommendation that is specific to your combination, please
call or e-mail ([email protected]) an SLP representative and have the following information available: eleva-
tion you typically ride at, conditions you plan on riding in (i.e.: sand, snow, mud or typical trail), tire
size, engine modifications that add power, and the weight
you have added to your vehicle. Clutch kits available formost popular applications, see pages 18 and 19.
PART # DeSCRiPTion PRiCe/eA.
50-301 RZR Driven Clutch 249.00
Multi-Angle Driven Clutch Helixes for Polaris RZRThese helixes make the RZR more responsive in all conditions and much less prone to RPM and top-
end power loss in higher load conditions (sand, snow, mud etc.) as well as at higher elevations and
when running larger, more aggressive tires.
note: Many RZR models came with a clutch that had the helix cast into the moveable
sheave. On these models, the helix is non-replace-
able (2009 and newer Standard RZR as well as
2010 and newer RZR-S and RZR-4 800). These
models must use the TEAM Tied Clutch shown
above in order to change the helix.*Will not fit 900 XP RZR
PART # DeSCRiPTion PRiCe/eA.
50-300* 70-58.33 79.00
50-302* 52 Straight 79.00
50-330 54 Straight 99.00
18
Clutch kits for Polaris RZR SLP clutch kits have been designed and tested to get the most performance
out of your RZR. We have been working with centrifugal clutches for over 40
years, and we know how to tune them to transfer your horsepower to the
ground. In most circumstances, optimizing the clutch setup in your RZR is the
best performance gain for the dollar spent. Through our testing we have found
that the RZR needs two distinctly different clutch setups depending on what
type of terrain that you are riding in.
Trail Clutch kit:The SLP Trail Clutch Kit is designed for RZRs that are typically ridden on semi hard surface trails with the oc-
casional run in muddy or sandy conditions. These Trail Kits have been designed for RZRs running standard
size tires with stock engines. They provide improved throttle response with better top end power and consis-
tency over a broad range of elevations and conditions. If aftermarket performance modifications and/or larger
or more aggressive tires have been added, please let us know so we can tailor your clutch kit accordingly.
Sand, Mud or Large Tire Clutch kit:The SLP Sand, Mud or Large Tire Clutch Kit is designed for RZRs that are primarily ridden in high load envi-
ronments such as sand dunes, sandy, muddy or snow covered trails, or on models that have added larger
more aggressive tires (up to one inch larger than stock). When exposed to these high load conditions, RZR’s
with stock clutching perform poorly, leaving the vehicle with poor throttle response and loss of RPM at wide
open throttle. In many cases the operator has to shift prematurely to low range which reduces wheel speed
and performance. These clutch kits match the power of the engine with the higher loads being applied to it to
keep the throttle response snappy and top end RPM and horsepower at their peak for a much more enjoyable
ride. If aftermarket performance modifications have been added, or if you are running paddles or tires even
larger than specified above, please let us know so we can tailor your clutch kit accordingly.
For clutch kit application chart, see the next page.
19
note: 2008 and 2009 Standard RZR 800 models require shimming for proper belt clearance.Shims and instructions included.
* Requires RZR-S belt Polaris Part #3211133.
Tech Tip:A question we often hear is, “What RPM should I expect my RZR to run at wide open throt-
tle?” This depends on the RZR
you have. The following chart
shows you where we like to rev
the different RZR engines at wide
open throttle (WOT) as well as
where their REV-Limiters are.
DescritpionStock exhaustConfiguration
WoT RPM ReV Limit
2008-10 Standard RZR 800 2 into 1 Manifold 6200-6400 6500
2009-12 RZR-S/ RZR-4 800 Header 6300-6500 6750
2011-12 Standard RZR 800 Header 6300-6500 6750
2011-12 RZR 900 XP Header 8000-8400 8750
elevation 0-4500’ 0-4500’ 4500’ + 4500’+
Description Trail kitSand, Mud orLarger Tires
Trail kitSand, Mud orLager Tires
Model Part # Price Part# Price Part # Price Part# Price
2008 Standard RZR 800* 41-700 233.85 41-800 233.85 41-701 233.85 41-801 233.85
2009-10 Standard RZR 800* 41-702 482.85 41-802 482.85 41-703 482.85 41-803 482.85
2009-10 RZR-S 800 41-704 482.85 41-804 482.85 41-705 482.85 41-805 482.85
2010-11 RZR-4 800 41-706 482.85 41-806 482.85 41-707 482.85 41-807 482.85
2011-12 Standard RZR 800* 41-708 482.85 41-808 482.85 41-709 482.85 41-809 482.85
2011-12 RZR-S 800 41-710 482.85 41-810 482.85 41-711 482.85 41-811 482.85
2011-12 RZR 900 41-712 223.95 41-812 347.90 41-713 223.95 41-813 347.90
Clutch kit Application Chart for Polaris 800/900 RZR
20
Rooster Adjustable Shift Weightsfor Polaris 900 RZR and 900 RZR-4
Get the HP to the ground on your RZR XP 900 with our adjustable Rooster
Weights! They allow you to add the included bolts and washers to the
weights at three different positions, the heel, center, and tip of the weight, to
fine-tune your clutching. They are adjustable from 50 to 70 grams with in-
cluded bolts and washers. This kit utilizes two different thicknesses of wash-
ers and three different weights of bolts for the ultimate in adjustability.
Inquire for recommendation.PART # DeSCRiPTion PRiCe
40-131 Rooster Adjustable Shift Weights (50-70 grams) 199.00
SLP MTX™ Clutch Weights for Polaris 800 RZR except 900 XPSLP's MTX™ Clutch Weights harness the horsepower of your RZR, RZR-S and
RZR-4 by transferring it more efficiently to the wheels. Their unique heavy heel and
special weight profile provide substantially greater shift force, delivering improved
acceleration and top speed. Other benefits include smoother engagement and very
responsive back shift. Adjustable by adding weight via rivets (up to 6 grams per
weight), this weight offers precise tuning ability for your application.
Please inquire for recommendations. Sold per set of 3 including
tuning rivets (6 - 1 gram, 6 - 2 gram and 6 - 3 gram rivets).
RePLACeMenT TUninG RiVeTS, PACkAGe oF 6
PART # WeiGHT PRiCe/SeT
40-129 62 gram 104.95
40-130 65 gram 104.95
PART # MATeRiAL WeiGHT PRiCe/SeT
40-90 aluminum 1 gram 9.95
40-91 steel 2 gram 9.95
40-92 steel 3 gram 9.95
2008-09 Standard RZR requires reshimming. Rivet Set/Removal tool see page 23.
21
Drive Spring for Polaris 570/800/900 RZRThese high quality clutch springs are offered in a variety of spring rates to allow
you to optimize the shift characteristics of your drive clutch. Things such as ele-
vation and tire size can have a dramatic effect on the performance of your RZR.
Ask a representative for more information regarding your specific application.
Part # Color Stripe Color Compression Rate- Pounds Price/[email protected]” @1.25”
40-404 Red Gold 25 175 24.9540-400 Red Gold/Black 55 225 24.9540-401 Red White/Black 65 245 24.9540-402 Red Green/Black 75 260 24.9540-403 Red Gold/Silver 105 260 24.95
Driven Spring for Polaris 570/800/900 RZRThis high quality clutch spring allows you to optimize the shift characteristics
of your driven clutch. Things such as elevation and tire size can have dra-
matic effect on the performance of your RZR. Ask a representative for more
information regarding your specific application.
Part # Color Compression Rate- Pounds Price/[email protected]” @1.05”
40-420 Red 105 165 24.9540-421 Lime Green/ Silver 125 190 24.95
22
Drive Clutch Spider Tool for All Polaris 800/900 RZR This Spider Tool allows the spider assembly in the drive clutch to be removed and
assembled in order to service the rollers and buttons. It is made of high quality steel
to precise specifications, allowing you to remove or install
even the most stubborn spiders easily. PART # PRiCe/eA.
20-75 47.95
SLP Clutch Press Tool has been widely accepted as the most efficient clutch
compression tool available. This revolutionary drive and driven clutch servic-
ing tool is designed specifically for compressing and holding springs for ease
of assembly and disassembly. These tools are specified in many factory re-
pair manuals as a required specialty tool for clutch compression. Wrestling
with the clutch or need for a second person to help is now history. Made
compact, the SLP tool can be used for field testing or production clutch re-
pair on the shop bench. High quality metal construction with powder coated finish provides a quality, functional tool
that is extremely durable. This design incor-
porates adjustable stand-offs that can be
moved in and out to allow proper fit for many
different clutches.
SLP Clutch Press Tool
PART # DeSCRiPTion PRiCe/eA.
20-204 Polaris Drive/Driven Clutches (Including ATV,
P2, TEAM Rapid Reaction and Tied Clutches)
99.95
Drive Clutch Spider nut Tool for Polaris 900 XPThis spider nut tool was specifically designed to remove the
jam nut that locks the spider into place on the XP 900.
Not Actual
PicturePART # PRiCe/eA.
20-214 TBA
23
Drive Clutch Pullers for Polaris 570/800/900 RZR These clutch pullers are designed to pull even the toughest ofclutches. Made of high quality heat treated material, these toolsare built to last.
PART # DeSCRiPTion PRiCe/eA.
20-207 570 RZR and 800 RZR, RZR-S and RZR-4 28.95
20-136 XP 900 RZR and RZR-4 36.95
Cam Arm Bushing Replacement ToolReplace worn MTX™ clutch weight bushings to maintain best performance.
Reduce wear on weights and rollers due to worn bushings.
PART # DeSCRiPTion PRiCe/eA.
20-1 Bushing Tool 6.95
40-28 Replacement Bushing/ ea. 5.25
40-200 Replacement Bushings, 3 pack 15.00
MTX™ Rivet Set/Removal ToolThis tool allows you to fine tune your MTX™ Weights quickly and easily by
setting or removing rivets. Specifically designed to be used in the field (but
can be clamped in a vise for shop use) it is compact and lightweight, yet
robust enough to be used time and time again. PART # PRiCe/eA.
20-155 52.95
#20-207
#20-136
24
Clutch Holding ToolThis premium tool offers the proper method to hold the
drive clutch from rotating while removing or torquing
clutch center bolt or when using a clutch puller. Unlike
other clutch holding tools that are laser cut, this tool
won’t hardmark or damage clutch, making it a far supe-
rior tool. It also features a cushion grip for
comfort. This tool is a must for quick and
easy clutch removal.
Will not hard markclutch like other tools.
Drive Clutch Holding Fixturefor Polaris 800/900 RZRThis Drive Clutch Holding Fixture can be bolted to a bench or clamped in a vise for
solid holding of drive clutch for spider removal when shimming for belt-to-sheave
clearance or servicing the spider. It contacts all clutch webs for maximum support to
eliminate clutch web damage. Features a quick spin thumb nut with knurled edge for
superior grip and center hold down for much greater
holding stability while applying off center torque. PART # PRiCe/kiT
20-162 79.95
PART # DeSCRiPTion PRiCe/eA.
20-202 Polaris RZR 34.95
Sheave Clamp Tool for Polaris 800/900 RZRThe sheave clamp tool holds the moveable sheave of the drive clutchin place when collapsed for changing clutch weights without removingouter cover or clutch from crankshaft. An absolute must for field tuning.
PART # PRiCe/eA.
20-161 7.95
25
Miniature Water Temperature GaugeMonitor water temperature easily with these new miniature
gauges. The gauge can be set to read in either Fahrenheit or Celsius. It
registers the current temperature and records maximum temperature. The
display can be mounted either with its Peel-N-Stick backing or bolted on.
Come standards with either a ¾”
or 1” hose splice adapter.
Polaris RZR uses 1” hose
PART # DeSCRiPTion PRiCe/eA.
19-103 3/4” (19mm) Hose I.D. Size 44.95
19-104 1” (25mm) Hose I.D. Size 44.95
Tool BagHandy roll-up style bag holds enough tools for trail riding or racing, and
includes a zipper pouch for small tools.
Tools not included
PART # PRiCe/eA.
46-52 19.95
extension Spring HooksSpecial tool made for installing and removing all
exhaust system springs or any spring that requires a
pull to release. Made of stainless steel for
strength and rust resistance.
SiZe PART # PRiCe/eA.
4” 20-89 10.95
6” 20-90 11.50
8” 20-183 11.95
12” 20-210 12.95
26
SLP Team HatThis attractive newly designed hat features a 3D embroidered
SLP logo on the front of the hat with EST. 1972 on the brim. Adjustable rear
closure for one size fits most.
This new hat was specifically designed with the hot summer
months in mind. It utilizes a lightweight breathable fabric shell
with a moisture wicking band to provide maximum comfort even
on the hottest days. Adjustable rear closure for one size fits
most.PART # DeSCRiPTion PRiCe/eA.
60-59 Black 21.95
60-58 Summer Grey 24.95
SLP Team BeanieFor those cold days try one of our SLP Beanies. This
newly designed beanie features a woven logo with embroidered letter-
ing for a great new look. Lined with Thinsulate™ insulation to keep
your head and ears warm and comfortable. One size fits most.
PART # PRiCe/eA.
60-49 19.95
27
SLP DecalsOur SLP Logo is on high quality 3M Transfer material
which is great for your RZR, truck or trailer.
# 60-12
# 60-8
# 60-9
PART # DeSCRiPTion PRiCe/eA.
60-41 2-1/4” x 1-1/4” Logo, per each .22
60-12 7” x 3” Logo, per each .95
60-55 7 1/2” x 3 1/2” Oval Logo .95
60-8 11 1/2” x 4” Logo, per each 3.00
60-9 18” x 9 1/2” Logo, per each 7.29
60-57 39” x 18” Oval Logo 25.95
# 60-55
# 60-57
inDeXinDeXAutotune...........................15
Beanie..............................26
Brake Pedal Covers.........10
Bumper, Front....................7
Bumper, Rear.....................9
Bushing Tool, Cam Arms..23
Clutch Holding Fixture......24
Clutch Holding Tool..........24
Clutch Kits...................18-19
Clutch Press Tool.............22
Clutch Pullers...................23
Clutch Spider Tools..........22
Clutch Vents.....................16
Decals..............................27
Doors.................................3
D-ring................................11
Drive Spring......................21
Driven Spring....................21
Front Bumper Support........8
Front Skid Plate..................8
Gas Tank Armor................14
Gauges........................15,25
Glove Box.........................10
Grab Handle.....................16
Half Doors..........................3
Hat....................................26
Helix.................................17
Hood Grill.........................12
Hood Hold Down..............12
Large Tire Clutch Kit....18-19
LCD Display......................15
Lower Radiator Vent.........12
MTX Rivet Removal Tool..23
MTX Weights....................20
Mud Guard.......................14
Muffler 800.........................5
Muffler 900.........................6
PCV..................................15
Power Commander...........15
Radiator Support................8
Radiator Vent Kit..............12
Rear Bumper Kit.................9
Rocker Armor......................4
Rooster Weights...............20
Sand Clutch Kit...........18-19
Secure Storage Box.........10
Sheave Clamp Tool..........24
Silencer 800.......................5
Silencer 900.......................6
Spring Hook Tool..............25
Stickers.............................27
Stinger..............................11
Super Silent Muffler............5
Team Tied Driven Clutch..17
Tool Bag...........................25
Trail Clutch Kit.............18-19
Trailing Arm Guards...........9
Water Temp Gauge Mini...25
Wheel Spacer Kit..............13
Wide Band 2.....................15
PRSRT STDU.S. POSTAGE
PERMIT NO. 96IDAHO FALLS, ID
PAID743 E. Iona Rd. Idaho Falls, ID 83401
(208)529-0244, www.startinglineproducts.com
Change Service Requested
For more information about these productsor to place an order, please contact:
Starting Line Products (208)529-0244
www.startinglineproducts.com
Scan this code with your smart
phone and you will be directed to
the UTV section of our website.
Top Related