SKU:
Top Related
CHANNEL CLAMPING NUT - Power-Strut · Insert the clamping nut anywhere along the con-tinuous slot channel. A 90° clockwise turn positions the grooves and teeth in the nut with the
50005000 Plus + PRS Instructionsww3.rainbird.com/documents/turf/man_5000_5000Plus_PRS.pdf · Pull up turret and turn to the left trip point (counterclockwise). CAUTION: If the rotor
For more information: €¦ · through your Tetra IN plus. To increase the water flow, turn the adjuster Clockwise. To decrease the water flow, to turn the adjuster counterclockwise.
USER INSTRUCTIONS & WARRANTY...is, pull up on the cable, and looking at the adjustment nut from the top, turn the adjustment nut counter-clockwise, screwing the adjustment nut to the
SIGNAL EQUIPMENT - GlobalSecurity.org · Operation To start the light, close the remote manual switch, then turn the starter counterclockwise on the rear of the starter unit. (See
Turn-Of-Nut/Part Turn · 2020. 3. 27. · Per AISC’s Specifica.on for Structural Steel Buildings (360-16) Section J3: “There are no specific minimum or maximum tension requirements
Micro Hi-Fi Component System · Press again to resume play. Turn ./> clockwise or counterclockwise (or press . or > on the remote). • Press DISC1–3 and play starts automatically.
Capacitive Proximity Sensors · If the yellow status indicator is already off, turn the potentiometer counterclockwise until the indicator turns on, then slowly clockwise until the
