SIGMACOVER 240
•All climates - No winter-grade or tropical versions•All industries•All substrates•All surface preparation standards•All specification areas
PROTECTIVE COATINGS
A TRULY MULTIFUNCTIONAL COATING !
2
•Arctic to Tropical•Air and surface temperatures -18°C to 50°C•Summer and winter•Maximum top-coating time 90 days -7°C to 30°C•Maximum re-coating time 6 months -7°C to 30°C•Potlife even at 32°C still 40 minutes
SIGMACOVER 240
ALL CLIMATES - NO WINTER-GRADE OR TROPICAL VERSIONS
3
•To touch•Handle•Lining immersion•Minimum recoating•Minimum top coating•Maximum recoating•Maximum top coating
SIGMACOVER 240Unique drying and curing time
-5ºC 0ºC 10ºC 20ºC 30ºC 50ºC
28h 24h 10h 5h 3h
48h 30h 13h 8h 6h
7d 7d 7d 7d 3d 2d
28d 14d 8d 5d 2d
40d 16d 10d 6d 3d
6m 6m 6m 6m 6m
3m 3m 3m 3m 3m
4
•Power generation•Chemical processing•Offshore•Marine•Bridges & highways•Storage tanks•Rail cars•Ballast water, fuel and mineral oil tanks•Crude oil storage
SIGMACOVER 240
ALL INDUSTRIES
5
ATMOSPHERIC
IMMERSED
AS TANKLINING
Steel• Blast cleaned• Ultra high pressure water jetted• Manual or power-tool cleaned
Concrete•Abrasive cleaning or acid etching
Galvanising•Light sweep blasted or chemically converted
Aluminium•Light sweep blasted or chemically converted
SIGMACOVER 240
ALL SUBSTRATES IN ALL SURFACE PREPARATIONS
6
•Direct to metal•Zinc silicate•Zinc epoxy•Standard epoxy primer•Prepared galvanizing•Prepared aluminium
TOP COATED WITH•Polyurethane•Epoxy polysiloxane (PSX® 700)•Epoxy acrylic (SIGMADUR™ 540) all available in a complete decorative colour range
SIGMACOVER 240
ALL SYSTEM COMBINATIONS
7
•Corus Corrosion resistance, ISO 12944 > C5/lm3•Norsok 501 rev5 System 3B Ballast water / Seawater •NSF Potable water•DNV / Marintec Class B1 for ballast water•NOHC Grain storage containers (not to be used in EU)•Lloyds Register Ballast tanks & double bottom tanks•ASTM E-84 Fire Resistance Class A Rating •MIL-PRF-23236C Type VII, Grade C, Class 5, 7, 9, 11, and 17•MIL PRF 4556F amend 1 and QPL requirements•MIL PRF 23236D Type V, Class 5, Grade C
SIGMACOVER 240
ALL SPECIFICATION AREAS – NUMEROUS APPROVALS
8
•Naval Research Laboratory authorized as better than 70%•Substrate tolerance•Longer coating life•Reliable average film thickness•Reducing stripe coating times
SIGMACOVER 240
SUPERIOR EDGE COVERAGE
9
• Our global engineering team promotes this product in all global specification(part of our global product offering)
•Available to all geographic regions, locations, licencees and distributors
SIGMACOVER 240
GLOBALLY AVAILABLE
10
•Thank you for your attention
SIGMA COATINGS®
A GLOBAL BRAND YOU CAN TRUST
AND SERVICE YOU CAN RELY ON
11
Top Related