Rotomould WorkshopProblem 1 Why are material specifications important to the rotomoulder
Materials, by Ian Hansen, Rotoconsult
Do you have specifications from your powder supplier? Dry Flow Is it the ARMO funnel?
Particle Size Bulk Density
If you don’t have copy, why not?
MATERIAL Melt Flow Index (MFI)POWDER Dry Flow Bulk Density Particle Size
Do you receive a COA for each different batch of powder delivered ?
ianhansenconsult.com
Do you review the variation in material properties? Can this affect you?
13226
13233
13240
13246
13253
13255
13258
13262
13270
13271
13273
13274
13319
13430
13438
13454
13462
13466
13478
13489
13490
13491
13492
13493
13499
14001
14002
14005
14006
14008
14009
14009
14010
14022
14031
14032
14033
14035
2.4
2.6
2.8
3
3.2
3.4
3.6Melt Flow Index -10%
+10%MFI
www.ianhansenconsult.com
Melt Flow Rate ASTM D1238 or ISO 1133
As MFI increases, polymer flow properties increaseAs MFI decreases, polymer flow properties decrease
Melt Flow Increase
Melt Flow Rate, sometimes referred to as Melt Flow Index, is a measure of the viscosity or flowability of the plastic once melted. This provides a value – the Melt Flow Index (MFI) – which gives a relative indication of the ease of flow of a polymer melt.
Melt Flow Decrease
www.ianhansenconsult.com
Source : ARMA Materials Properties Guide
13226
13233
13240
13246
13253
13255
13258
13262
13270
13271
13273
13274
13319
13430
13438
13454
13462
13466
13478
13489
13490
13491
13492
13493
13499
14001
14002
14005
14006
14008
14009
14009
14010
14022
14031
14032
14033
14035
2021222324252627282930
Dry Flow
Do you review the variation in material properties? Can this affect you?
www.ianhansenconsult.com
Powder Quality important to fill tight corners and threads Dry flow is the measure of how a powder will tumble and flow in the
mould during the rotational moulding process. The dry flow affects the heat transfer in the powder pool and how the
powder distributes itself over the mould surface. Dry flow depends mostly on the Particle Shape, and to a lesser
extent Particle Size. Particles that have been ground poorly will have ‘tails’ and tend to be
‘fluffy’. These two characteristics will give the powder poor flow properties -
possible leading to uneven wall thickness, bridging across narrow recesses and a high void content within the moulded product
www.ianhansenconsult.com
Powder Quality important to fill tight corners and threads
www.ianhansenconsult.com
Image Source: www.aptis.be/
Examples of different flow characteristics
9www.ianhansenconsult.com
Particle 1Ideal
Particle 2Very good
Particle 3Poor
Imag
e So
urce
: TP
Pict
ure®
The most desirable particle is thought to be cubic in shape with generously rounded corners, without tails.
WHY? The rate at which powder melts is a function of the shape of powder particles.
Powder with tails Powder without tails
A BWhich powder is better quality?
www.ianhansenconsult.com
Powder without tails
BWhich powder is better quality?
www.ianhansenconsult.com
For those who do not have a microscope handy…measure quality with Dry Flow funnelWhich powder is better quality?
A•Dry Flow 22sec
B•Dry Flow 25sec
C•Dry Flow 29sec
www.ianhansenconsult.com
For those who do not have a microscope handy…measure quality with Dry Flow funnelWhich powder is better quality?
A• Dry Flow 22sec
www.ianhansenconsult.com
In most cases standard powder with faster dry flow is usually better ‘quality’ than slower dry flow
If you receive a Certificate of Analysis [COA] with each powder batch delivered, you can quickly & easily compare ‘quality’ by reviewing the Dry Flow time on the COA
Ian Hansen Consult
Top Related