RISO Kagaku CorpOverseas Technical Department
Table of Contents
Section:
1. Preparation of Service tools
2. Scan & Copy mode
3. Machine Transportation
4. HC Technical Update
5. Service cost and Maintenance schedule 6. Waste Ink collection
7. Limited capability of HC5000
8. Service manpower 9. Field Support
10. Handling of Print head
11. Control of the License of PS7R 12. Service Report
• Required Special tools for HC
• Adjustment requires Laptop PC
• Starter parts stock
1. Preparation of Service tools
1. Preparation of Service tools
Special Tools can be purchased from RKC Parts Center Part NumberPart Name
Remark
X-7601Torque Driver; RTD120CN
Tighten Print Head to the specified torque of 9.0 kgf*cm.
X-7607Screw Driver bit
Standard bit for Torque Driver+2X150mm
033-19318-002BP Support Stand
Jig for holding BP Transfer unit when replacing Transfer Belt.
450-00006-002CF Card; 512MB
512MB Compact FlashFor Upgrading Firmware program
450-00007-009CF Card Reader
CF Reader adopted USB2.0With 1.5m USB Extension CableFor Upgrading Firmware program
X-400JK Wiper
Cleaning wipe for inside the machine, leaves no fiber or paper residue.
033-19323-006HC Calibration Chart
For Calibration of Portable Scanner during image adjustment
022-11500-207Carry handle
For raising and moving the machine when machine setup. This is the same as Carry handle for V8.
033-19321-003Intlock Jig3
For deactivating the interlock switch to operate the machine with taking off Front cover and Inner cover.
033-19322-000Intlock Jig4
1. Preparation of Service tools
Special Tools to be purchased locally
Description Remark
Laptop PC Required Equipment2 X USB2.0 Ports,Win2000/XP,XGA Display
For Upgrading Firmware and Image Adjustment
Portable FB ScannerCanon LiDE50 oror LiDE35
For Image Adjustment with Auto Image Adjustment Software
Magnifier (10X) For inspection of printing Problem
Syringe (20mm) For removing Ink of Overflow Tank when Overflow is occurred.
Plastic tube(6mmX100mm)
For connecting Syringe with Overflow Tank.
1. Preparation of Service tools
Required items
• Laptop PC• Portable FB Scanner• Calibration chart• RISO HC Matt Paper A4• RISO HC Matt Paper A3
Auto-adjustment is not required at the machine installation. But please get experienced to use the software before you need.
Image Adjustment with Auto-adjustment software
1. Preparation of Service tools
Starter spare parts List(1/3)
Based on 100 units of field
Part Number Part Name Recommend Stock
033-19202-101 PRINT HEAD 6
033-19203-000 HEAD DRIVER PCB 1
033-19204-007 RIBBON CABLE 2
033-19206-000 ID UNIT 1
033-19207-006 VALVE 1 2
033-19208-002 VALVE 2 2
033-19209-009 RESERVOIR K 2
033-19210-007 RESERVOIR C 2
033-19211-003 RESERVOIR M 2
033-19212-107 RESERVOIR Y 2
033-19214-002 OVERFLOW TANK 1
033-19216-005 PRESSURE PUMP 1
033-19217-001 PHOTOINTERRUPT 2
033-19219-004 BOTTLE JOINT K 1
033-19220-002 BOTTLE JOINT C 1
033-19221-009 BOTTLE JOINT M 1
033-19222-102 BOTTLE JOINT Y 1
033-19224-008 IB COVER SWITCH 1
033-19225-004 PHOTOINTERRUPT 2
033-19226-000 CLEANING UNIT 1
033-19229-000 SUCTION HEAD 6
033-19233-007 SUCTION CHAMBER 1
033-19234-003 SUCTION PUMP UNIT 1
033-19235-000 SUCTION TUBE 1
033-19236-006 PUMP FILTER 10
1. Preparation of Service tools
Starter spare parts List(2/3)
Part Number Part Name Recommend Stock
033-19241-000 SPONGE ROLLER 5
033-19252-001 DPX ROLLER 1
033-19254-004 MICRO SWITCH 2
033-19256-007 DUPLEX BELT U 2
033-19257-003 DUPLEX BELT L 2
033-19260-004 BP TRANSFER BELT 5
033-19262-007 BP TRANSFER MOTOR 1
033-19263-003 CLEANING ROLLER 10
033-19265-006 LIFT GEAR UNIT 1
033-19266-002 LIFT WORM GEAR 1
033-19267-009 CCD UNIT 2
033-19268-005 CCD SENSOR 4
033-19269-001 MAIN MOTOR 1
033-19271-006 REGIST ROLLER L 2
033-19272-002 REGIST ROLLER U 2
033-19273-009 REGIST CLUTCH 1
033-19274-005 PAPER FEED CLUTCH 4
033-19275-001 DPX CLUTCH 4
033-19278-000 DUST FAN2 1
033-19292-003 CCD AD CONV PCB 1
033-19293-000 ORIP PCB 2
033-19294-006 ORMC PCB 2
1. Preparation of Service tools
Starter spare parts List(3/3)
Part Number Part Name Recommend Stock
033-19296-009 MOTOR DRV PCB 4
033-19302-009 POWER SUPPLY 1
033-19303-005 FUSE1 5
033-19304-001 FUSE2 5
033-19305-008 FUSE3 5
033-19307-000 INK COVER 1
033-19316-000 INK DRAIN TANK 10
033-19324-100 PUMP SPONGE 10
033-19325-009 PM KIT 10
033-19328-008 ID UNIT_MY 1
033-75001-054 HC CONTROL PCB S 1
101-50504-002 MAINBOARD;PS7R 1
101-52513-009 HDD;PS7R(G) 2
1. Preparation of Service tools
Questionnaires
1) Are you ready with the following Tools/Jigs?
Tools/Jigs Check Qty Remark
For machine setup Carry handle Ready/
Not ready
For machine setup CF Card/CF Card reader
Ready/
Not ready
For machine setup
/ Maintenance
Laptop PC Ready/
Not ready
For maintenance Portable scanner
Ready/
Not ready
For maintenance Torque Driver Ready/
Not ready
For maintenance Syringe Ready/
Not ready
For maintenance Lint free tissue Ready/
Not ready
2) Auto image adjustment
Question: Have you tried Auto image adjustment with your HC and your laptop PC?
Answer:
3) Starter parts order for HC
Question: Have you already issued an order of spare parts for HC?
Answer:
2. Scan&Copy mode
• Required items– Epson scanner– ELO Touch panel– HC Scanner connection kit
• Setting up– Refer to “PS7R Scanner Connection Kit
Installation Procedure”.
• Service– RKC does not take care of the maintenance
support for Epson Scanner and Touch Panel.
2. Scan & Copy mode
HC Scanner connection kit Contents:
– 128MB DIMM for PS7R– USB Cable– License Label (serial number for Scan mode)– RISO Scan utility software CD
(Software to use Epson scanner as a Network scanner)
2. Scan&Copy mode
Questionnaires
4) To use Scan&Copy mode on HC, Epson scanner and Touch Panel are required.
Questions:
Epson Scanner ELO Touch Panel
Do you have these items for DEMO room?
Do your sales reps recommend these items to the customer?
Where (Whom) do customers buy from?)
Who is responsible for repairing these items?
3. Machine transportation
• Machine installation– Do not tilt HC5000 more than 20 degree
If there in no elevator in the building,
a crane truck is needed for machine installation.
3. Machine transportation
Moving machine• Repack the machine if moved after unpacked• Do not throw away repacking item (Wire tie and
PP band)
3. Machine Transportation
Questions: Yes/No
Do you remove HC Demo machine for demonstration outside?
Do you have Carry Handles for HC?
Do you have the packing items for moving HC?
In general, the HC machine is unpacked at customer site or your office?
Questionnaires5) About moving machine
• Major problem in out-of box checking1) Yellow ink clogging2) Damaged Print Head
• Major problem in the field3) W99-315 / S04-3074) X02-210,X02-212 Paper jam by paper dust5) S02-204 Transfer Belt Motor Lock
4. HC Technical Update
4. HC Technical Update
1) Y ink clogging
The surface of Print Head may dry up during machine transit. Then the machine requires several time of head cleaning operation to get complete image. To save cleaning ink, we have changed machine installation procedure.
GoodNo Good
4. HC Technical Update
2) Damaged Print Head by Paper Guide on Cleaning Unit
To prevent Paper Guide on Cleaning Unit from coming out, Cleaning Unit has been modified. (Ref. HCT-014)
Paper Guide
(Old type)
(New type)
3) W99-315 /S04-307
• W99-315 Ink level is lowWhen air comes slightly in Ink Distribution unit, the surface of ink gets down and W99-315 displays. Usually the surface rises back after Head Cleaning.
• S04-307 OverflowWhen too much air comes in Ink Distribution unit, ink goes down to Reservoir. When Reservoir gets overflowed, S04-307 displays.
4. HC Technical Update
4. HC Technical Update
3) W99-315 /S04-307Possible parts of air-leakage
ID Electro-magnetic ValvePrint HeadReservoirID Unit
ID Electro-magnetic Valve is now renewed for better air-sealing.Even so, when this problem occurs, please replace the ID electro-magnetic Valve.
4. HC Technical Update
4) X02-210,X02-212 Paper jam by paper dust
Like RISO Printer, Sensor mis-detects paper jam by paper dust.Cleaning Sensor around 2nd paper feeding area is requiredevery 300k pages.
Top Edge SensorRegist Sensor
4. HC Technical Update
5) S02-204 Transfer Belt Motor Lock
Not only surface but also the back side of BP transfer Belt requires cleaning.Otherwise you will get S02-204 (Transfer Belt Motor Lock) or blurring image.
5. Service cost and maintenance schedule
HC Maintenance ScheduleRefer to HC Preventive Maintenance Schedule.
5. Service cost and maintenance schedule
HC Service CostRefer to RKC’s proposal of “HC Maintenance cost Estimate”.
5. Service cost and maintenance schedule
Questionnaires 6) Regarding Service Contract
Question: Do you have any Service contract menu for RISO Printer?
Answer:
Question: Do you have any Service contract menu for HC?
Answer:
6. Waste Ink collection
HC5000 makes Waste ink.
Who disposes of the ink tank?The customer pays for the ink disposal cost? Does your service contract cover the cost?
Please consider Waste ink collection system.
6. Waste ink collection
Question: Where will Waste Ink tank be sent to?
Answer:
Questionnaires7) Ink bottle/ Ink tank collection
Question: Have you made Ink Bottle collection system in your country?
Answer:
Question: Who will replace Waste Ink tank?
Answer:
Question: Who/how dispose of collected Waste Ink?
Answer:
7. Limited capability of HC5000
1) Paper restriction
2) Ripping /Printing speed
3) Temperature /Humidity
7. Limited capability of HC5000
1) Paper restriction
– No curled paper / No wavy paper– No thick paper– No envelope
Even if above paper can feed without paper jam, Print Head gets damage.
Basic specification of Paper weight
•Standard PF Tray 46g/m2 - 157g/m2
•Paper feed Trays 52g/m2 - 104g/m2
7. Limited capability of HC5000
2) Ripping /Printing speed• Maximum pages of one print job
1500 pages maximum in case of A4 size
• Ripping speed/Printing speed We don’t recommend to sell HC5000 to a customer who wants variable printing with high-speed.
CPU
HDD
PC
Printer Driver
Spooler
PS7R HC5000
USB2.0Job
Memory
Image Processing
Image data1
2
3
5
7. Limited capability of HC5000 HC Printing process 1/2
4
1. Making a print jobProcessing speed depends on the performance of PC
2. Sending the job to PS7R
PostScript data is stored on HDD
3. Processing image dataPS data is changed to image data-The job with many pages
-600 dpi Printing take long time-Line smoothingex.) Ripping time of HC user's guide (189Pages).300X300dpi Line smoothing ON => 43min.300X300dpi Line smoothing OFF=> 9min.300X600dpi Line smoothing ON => 77min.300X600dpi Line smoothing OFF=> 16min.
6
CPU
HDD
PC
Printer Driver
Spooler
PS7R HC5000
USB2.0Job
Memory
Image Processing
Image data1
2
3
5
7. Limited capability of HC5000 HC Printing process 2/2
4
4. Store image dataRegardless print job type, image data is produced as A4 size.To store image data, HDD spends approx. 20MB/page.Maximum page is 1500 pages. (=30GB/ 20MB) *A4 size
5. Sending the image data to HC5000 Image data on HDD sends to HC main PCB by USB cable.
The transfer speed is slower than HC printing speed.
6. PrintingPrinting speed is set as paper size and paper type, but.When data on HC main PCB is empty, HC has to wait for the image data from PS7R.
6
7. Limited capability of HC5000
2) Ripping /Printing speed• Maximum pages of one print job
1500 pages maximum in case of A4 size
• Ripping speed/Printing speed We don’t recommend to sell HC5000 to a customer who wants variable printing with high-speed.
HC5000 can print with High speed same original like Risograph.
Variable, Duplex and Booklet printing with many pages make HC5000 slow.
7. Limited capability of HC5000
• Temperature / HumidityTemperature range:15°C to 30°C
– Low temp. may stop the machine until ink warms up.
– High temp. may stop the machine until Print Head gets cool down.
Humidity range:40% to 70%Change of humidity may make paper curl.
HC technical field data in JapanDirect sales only as of March, 2005
1. Average Monthly copy volume 33,000 copies2. Calls between copies 45,000 copies3. Defective Ratio 40%4. Mean time to repair 69 min.
8. Service Manpower
8. Service Manpower
• Mean time to repairExisting RISO Machines approx. 35min.HC5000 approx. 69min.
2times
• Defective RatioExisting RISO Machines approx. 16%HC5000 approx. 40%
2.5times
All totaled, 5times heavier350 RISO machines 70 HC’s≒
• A technician who takes care of HC must pass HC Technical Training.
9. Field support
9. Field support
8) HC Technical Training
Question: Have you finish HC technical training? How many trainees took?
Answer:
Question: When is HC technical training held?
Answer:
If not yet,
Questionnaires
10. Handling of Print Head
Warranty condition• RKC warrants parts on the machine for 14 months from BL Date
except the following consumable parts.-Rubber Roller-Stripper Pad-Pickup Roller-Exit Roller-Belts-Filter Sponge-Cleaning Roller-Cleaning Ink Tank
• RKC warrants Print Head as a spare part for 6 months from shipping date.
Prevention of resale to a wrong channel
11. Control of the License of PS7R
• PS7R is designed to control the Adobe license by Hardware-key (Dongle)
• Dongle as spare part does not include Adobe license. Do not sell to a wrong channel.
12. Service Report
• Error code
HC displays Error code in 6-9 digits.
Ex.) S98-032-Y21
Please check if your service system
accept 9 digits error code.Service report form, Service data base…
Top Related